ZH
RU
ES

Cable insulation tga test

Cable insulation tga test, Total:499 items.

In the international standard classification, Cable insulation tga test involves: Electrical wires and cables, Components and accessories for telecommunications equipment, Protection against fire, Insulating materials, Electrical and electronic testing, Fibre optic communications, Electromechanical components for electronic and telecommunications equipment, Insulating fluids, Insulation, Thermodynamics and temperature measurements, Electrical engineering in general, Electrical accessories, Aerospace electric equipment and systems, Galvanic cells and batteries, Telecommunication systems, Transformers. Reactors, Nuclear energy engineering, Railway rolling stock, Products of non-ferrous metals, Electricity. Magnetism. Electrical and magnetic measurements, Paints and varnishes, Power transmission and distribution networks, Software development and system documentation, Fruits. Vegetables, ENERGY AND HEAT TRANSFER ENGINEERING, Hand-held tools, Protective equipment, Non-metalliferous minerals, Rotating machinery.

HU-MSZT, Cable insulation tga test

• MSZ 1168/8-1985
• MSZ 1168/5-1983
• MSZ 1168/4-1984
• MSZ 1168/9-1985
• MSZ 1168/3-1983
• MSZ 1168/10-1985
• MSZ 144/1-1980
• MSZ 20880/2-1984

PL-PKN, Cable insulation tga test

• PN E04160-45-1988 Electric cables Test methods Shrinkage test of insulation
• PN E04160 ArkusZ51-1973 Electric cables Methods of ?esting Drainage test for nondraining paper insu lated metal sheathed cables
• PN E04160 ArkusZ17-1973 Electric cables Methods of testing Verification of mechanical properties of textil insulation braid
• PN E04160-41-1988 Electric cables Test methods Pressure test at high temperature for PVC insulations and sheaths
• PN E04160-46-1987 Electric cables Methods of testing Test of resistance to Iow temperature of rubber of thermoplastic insulation of sheath
• PN E04160-33-1988 Electric cables Test methods Loss of mass test of pvc insulation and sheath
• PN E04410-16-1985 Electroinsulating varnishes Test methods Testing of water absorption
• PN E04160-16-1989 Electric cab?es Methods of testing Test of the stripping properties of insuiation
• PN E04410-07-1985 Electroinsulating varnishes Test methods She!f-life testing
• PN E06325-1991 Tests on hollow insulators for use in electrical equipment

German Institute for Standardization, Cable insulation tga test

• DIN VDE 0472-605:1985 Testing of cables, insulated wires and flexible cords; abrasion
• DIN VDE 0472-604:1985 Testing of cables, wires and flexible cords; tightness of cables sheaths
• DIN VDE 0472-603:1989 Testing of cables, wires and flexible cords; bending behaviour
• DIN VDE 0472-801:1986 Testing of cables, wires and flexible cords; quality of zinc coatings
• DIN VDE 0472-1:1987 Testing of cables, wires and flexible cords; general
• DIN VDE 0472-613:1985 Testing of cables, wires and flexible cords; tear resistance
• DIN EN 50289-1-4:2002 Communication cables - Specifications for test methods - Part 1-4: Electrical test methods; Insulation resistance; German version EN 50289-1-4:2001
• DIN IEC 60167:1993 Methods of test for insulating materials for electrical purposes; insulation resistance of solid materials (IEC 60167:1964); German version HD 568 S1:1990
• DIN VDE 0472-512:1985 Testing of cables, wires and flexible cords; resistance between protective conductor and semi-conductive layer
• DIN EN 60332-1-1:2005 Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus (IEC 60332-1-1:2004); German version EN 60332-1-1:2004
• DIN EN 60332-2-1:2005 Tests on electric and optical fibre cables under fire conditions - Part 2-1: Test for vertical flame propagation for a single small insulated wire or cable - Apparatus (IEC 60332-2-1:2004); German version EN 60332-2-1:2004
• DIN 46449:1970 Insulating Varnishes and Insulating Resin Materials for Electrical Purposes; Finishing Varnishes, Test Methods
• DIN EN 60426:2007 Electrical insulating materials - Determination of electrolytic corrosion caused by insulating materials - Test methods (IEC 60426:2007); German version EN 60426:2007
• DIN VDE 0282-2:2003 Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 2: Test methods (IEC 60245-2:1994, modified); German version HD 22.2 S3:1997 + A1:2002

American National Standards Institute （ANSI), Cable insulation tga test

• ANSI/SCTE 108-2012 Test Method for Dielectric Withstand of Coaxial Cable
• ANSI/NEMA ICEAT-27-581-2008 Standard Test Methods for Extruded Dielectric Power, Control, Instrumentation, and Portable Cables for Test
• ANSI/ASTM D470:2013 Test Methods for Crosslinked Insulations and Jackets for Wire And Cable
• ANSI/ICEA T-26-465-2013 Guide For Frequency of Sampling Extruded Dielectric Power, Control, Instrumentation, and Portable Cables for Test
• ANSI/SCTE 13-2011 Dielectric Air Leakage Test Method For Trunk, Feeder and Distribution Coaxial Cable
• ANSI C29.1-1988 Electrical Power Insulators, Test Methods for
• ANSI/ASTM D4566:2005 Test Methods for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable
• ANSI/ASTM D2148:2013 Test Methods for Bondable Silicone Rubber Tapes Used for Electrical Insulation
• ANSI/ASTM D2633:2013 Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable

Association Francaise de Normalisation, Cable insulation tga test

• NF C32-070/A1:2005 Insulated cables and flexible cords for installations - Classification tests on cables and cords with respect to their behaviour to fire.
• NF C32-070:2001 Insulated cables and flexible cords for installations - Classification tests on cables and cords with respect to their behaviour to fire.
• NF C32-020:1981 Insulated cables and flexible cords. Test methods for insulations and sheaths of electric cables and cords (elastomeric and thermoplastic compounds).
• NF C93-537-1-4*NF EN 50289-1-4:2001 Communication cables - Specifications for test methods - Part 1-4 : electrical test methods - Insulation resistance
• NF C32-011-506*NF EN 60811-506:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 506 : mechanical tests - Impact test at low temperature for insulations and sheaths
• NF C32-011-504*NF EN 60811-504:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 504: mechanical tests - Bending tests at low temperature for insulation and sheaths
• NF EN 60332-2-1:2005 Essais des câbles électriques et à fibres optiques soumis au feu - Partie 2-1 : essai de propagation verticale de la flamme sur conducteur ou câble isolé de petite section - Appareillage d'essai
• NF C26-210:1965 Testing methods for insulating materials. Measurement of total insulation resistance.
• NF C66-081:1978 Insulators for sub-stations. Hollow insulators supplied without metal fittings. Tests.
• NF C32-011-508*NF EN 60811-508:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 508 : mechanical tests - Pressure test at high temperature for insulation and sheaths
• NF C32-011-505*NF EN 60811-505:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 505: mechanical tests - Elongation at low temperature for insulations and sheaths
• NF C32-011-502*NF EN 60811-502:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 502: mechanical tests - Shrinkage test for insulations
• NF EN 60811-502:2012 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 502 : essais mécaniques - Essai de rétraction des enveloppes isolantes
• NF C93-400-3-1*NF EN 60512-3-1:2002 Connectors for electronic equipment - Tests and measurements - Part 3-1 : insulation tests - Test 3a : insulation resistance
• NF C32-011-201*NF EN 60811-201:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 201: general tests - Measurement of insulation thickness
• NF C32-011-509*NF EN 60811-509:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 509 : mechanical tests - Test for resistance of insulations and sheaths to cracking (heat shock test)
• NF C32-011-201/A1*NF EN 60811-201/A1:2017 Electric and optical fibre cables - Test methods for non-metallic materials - Part 201 : general tests - Measurement of insulation thickness
• NF F21-002:1989 Railway rolling stock. Insulators for pantographs and roof cables. Characteristics and tests.
• NF C32-078-1-1*NF EN 60332-1-1:2005 Tests on electric and optical fibre cables under fire conditions - Part 1-1 : test for vertical flame propagation for a single insulated wire or cable - Apparatus
• NF C32-078-1-1/A1*NF EN 60332-1-1/A1:2015 Tests on electric and optical fibre cables under fire conditions - Part 1-1 : test for vertical flame propagation for a single insulated wire or cable - Apparatus
• NF C32-011-509/A1*NF EN 60811-509/A1:2017 Electric and optical fibre cables - Test methods for non-metallic materials - Part 509 : mechanical tests - Test for resistance of insulations and sheaths to cracking (heat shock test)
• NF C32-021:1985 Insulated cables and flexible cords for installations. Test methods for cables and cords used under special conditions.
• NF C32-011-409*NF EN 60811-409:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 409 : miscellaneous tests - Loss of mass test for thermoplastic insulations and sheaths
• NF EN 60811-201/A1:2017 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 201 : essais généraux - Mesure de l'épaisseur des enveloppes isolantes
• NF EN 60811-201:2012 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 201 : essais généraux - Mesure de l'épaisseur des enveloppes isolantes
• NF C32-071:1985 Test electric cables under fire conditions Guide Stating the Method for Checking Small single Insulated Cores of the Category C2
• NF L52-250-303*NF EN 3475-303:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 303 : insulation resistance
• NF C32-011-508/A1*NF EN 60811-508/A1:2017 Electric and optical fibre cables - Test methods for non-metallic materials - Part 508 : mechanical tests - Pressure test at high temperature for insulation and sheaths
• NF C32-078-2-1*NF EN 60332-2-1:2005 Tests on electric and optical fibre cables under fire conditions - Part 2-1 : test for vertical flame propagation for a single small insulated wire or cable - Apparatus
• NF EN 60811-504:2012 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 504 : essais mécaniques - Essais d'enroulement à basse température pour les enveloppes isolantes et les gaines
• NF EN 60811-506:2012 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 506 : essais mécaniques - Essai de choc à basse température pour les enveloppes isolantes et les gaines
• NF EN 60811-505:2012 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 505 : essais mécaniques - Essai d'allongement à basse température pour les enveloppes isolantes et les gaines
• NF EN 60811-405:2012 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 405 : essais divers - Essai de stabilité thermique pour les enveloppes isolantes et gaines en PVC
• NF EN 60811-509/A1:2017 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 509 : essais mécaniques - Essai de résistance à la fissuration des enveloppes isolantes et des gaines (essai de choc thermique)
• NF EN 60811-509:2012 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 509 : essais mécaniques - Essai de résistance à la fissuration des enveloppes isolantes et des gaines (essai de choc thermique)
• NF EN 60332-1-2/A1:2015 Essais des câbles électriques et à fibres optiques soumis au feu - Partie 1-2 : essai de propagation verticale de la flamme sur conducteur ou câble isolé - Procédure pour flamme à prémélange de 1 kW
• NF EN 60332-1-2:2005 Essais des câbles électriques et à fibres optiques soumis au feu - Partie 1-2 : essai de propagation verticale de la flamme sur conducteur ou câble isolé - Procédure pour flamme à prémélange de 1 kW
• NF EN 60332-1-2/A11:2017 Essais des câbles électriques et à fibres optiques soumis au feu - Partie 1-2 : essai de propagation verticale de la flamme sur conducteur ou câble isolé - Procédure pour flamme à prémélange de 1kW
• NF EN 60332-1-2/A12:2020 Essais des câbles électriques et à fibres optiques soumis au feu - Partie 1-2 : essai de propagation verticale de la flamme sur conducteur ou câble isolé - Procédure pour flamme à prémélange de 1kW
• NF EN 60811-508/A1:2017 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 508 : essais mécaniques - Essai de pression à température élevée pour enveloppes isolantes et les gaines
• NF EN 60811-508:2012 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 508 : essais mécaniques - Essai de pression à température élevée pour les enveloppes isolantes et les gaines
• NF C26-260*NF EN 60426:2016 Electrical insulating materials - Determination of electrolytic corrosion caused by insulating materials - Test methods
• NF C32-075-1:1999 Common test methods for cables under fire conditions - Test for resistance to vertical flame propagation for a single insulated conductor or cable - Part 1 : apparatus.
• NF C32-027/A2:2002 Insulating and sheathing materials of electric and optical cables - Common test methods - Part 1-4 : general application - Tests at low temperature.
• NF C32-011-501*NF EN 60811-501:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 501 : mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds
• NF C66-367*NF EN 61467:2009 Insulators for overhead lines - Insulator strings and sets for lines with a nominal voltage greater than 1 000 V - AC power arc tests
• NF C66-037*NF EN 60437:2000 Radio interference test on high-voltage insulators
• NF C27-137*NF EN 50375:2002 Testing methodology for wipers used in electrical insulating oil

American Society for Testing and Materials (ASTM), Cable insulation tga test

• ASTM D3850-19 Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA)
• ASTM E780-17(2021) Standard Test Method for Measuring the Insulation Resistance of Mineral-Insulated, Metal-Sheathed Thermocouples and Mineral-Insulated, Metal-Sheathed Cable at Room Temperature
• ASTM E780-06 Standard Test Method for Measuring the Insulation Resistance of Mineral-Insulated, Metal-Sheathed Thermocouples and Thermocouple Cable at Room Temperature
• ASTM D2633-02 Standard Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable
• ASTM D470-05 Standard Test Methods for Crosslinked Insulations and Jackets for Wire and Cable
• ASTM D2633-08 Standard Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable
• ASTM D2633-12 Standard Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable
• ASTM D2633-13 Standard Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable
• ASTM D2633-13a Standard Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable
• ASTM D470-13 Standard Test Methods for Crosslinked Insulations and Jackets for Wire and Cable
• ASTM E780-17 Standard Test Method for Measuring the Insulation Resistance of Mineral-Insulated, Metal-Sheathed Thermocouples and Mineral-Insulated, Metal-Sheathed Cable at Room Temperature
• ASTM D2633-82(1989) Standard Methods of Testing Thermoplastic Insulations and Jackets for Wire and Cable
• ASTM D2633-96 Standard Methods of Testing Thermoplastic Insulations and Jackets for Wire and Cable
• ASTM D2633-21 Standard Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable
• ASTM D5424-18 Standard Test Method for Smoke Obscuration of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration
• ASTM D3032-98 Standard Test Methods for Hookup Wire Insulation
• ASTM D5424-05 Standard Test Method for Smoke Obscuration of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration
• ASTM D5424-10 Standard Test Method for Smoke Obscuration of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration
• ASTM D470-99 Standard Test Methods for Crosslinked Insulations and Jackets for Wire and Cable
• ASTM D470-21 Standard Test Methods for Crosslinked Insulations and Jackets for Wire and Cable
• ASTM D2633-20 Standard Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable

Institute of Electrical and Electronics Engineers (IEEE), Cable insulation tga test

• IEEE 817-1993 Test procedure for flame-retardant coatings applied to insulated cables in cable trays
• IEEE No 83 IEEE Test Procedure for Radial Power Factor Tests on Insulating Tapes in Paper-Insulated Power Cable
• IEEE 48-2009 Standard for test procedures and requirements for alternating-current cable terminations used on shielded cables having laminated insulation rated 2.5 kV through 765 kV or extruded insulation rated 2.5 kV through 500 kV
• IEEE Std 817-1993 IEEE Standard Test Procedure for Flame-Retardant Coatings Applied to Insulated Cables in Cable Trays

NEMA - National Electrical Manufacturers Association, Cable insulation tga test

• NEMA WC 56-1986 3.0 kHz Insulation Continuity Proof Testing of Wire and Cable

Standard Association of Australia （SAA）, Cable insulation tga test

• AS 1049.2:2008/Amdt 1:2010
• AS 1049.2:2008 Telecommunication cables—Insulation, sheath and jacket Part 2: Test methods
• AS 2374.3.0:1982 Power transformers - Insulation levels and dielectric tests - General requirements
• AS 2374.3.1:1992 Power transformers - Insulation levels and dielectric tests - External clearances in air
• AS/NZS IEC 60332.1.1:2017 Tests on electric and optical fibre cables under fire conditions, Part 1.1: Test for vertical flame propagation for a single insulated wire or cable apparatus
• AS/NZS 3187:1995 Approval and test specification - Mineral-insulated metal-sheathed cables
• AS 1049.2:2022 Telecommunication cables — Insulation, sheath and jacket, Part 2: Test methods

ZA-SANS, Cable insulation tga test

• SANS 6286:2007 Test methods for sheathing of insulated electric cables
• SANS 6283:2007 Test methods for armouring of insulated electric cables
• SANS 60332-2-1:2005 Tests on electric and optical fibre cables under fire conditions Part 2-1: Test for vertical flame propagation for a single small insulated wire or cable - Apparatus
• SANS 61467:2009 Insulators for overhead lines - Insulator strings and sets for lines with a nominal voltage greater than 1 000 V - AC power arc tests
• SANS 6281-3:2007 Test methods for impregnated paper-insulated electric cables Part 3: Tests on finished cable
• SANS 6281-1:2007 Test methods for impregnated paper-insulated electric cables Part 1: Tests on insulating and semi-conducting paper
• SANS 6284-1:2007 Test methods for cross-linked polyethylene (XLPE) insulated electric cables Part 1: Tests on XLPE insulation
• SANS 6282-3:2007 Test methods for bare conductors and conductors of insulated electric cables Part 3: Mechanical tests
• SANS 60332-1-1:2005 Tests on electric and optical fibre cables under fire conditions Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus
• SANS 60332-1-2:2005 Tests on electric and optical fibre cables under fire conditions Part 1-2: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame
• SANS 6284-3:2007 Test methods for cross-linked polyethylene (XLPE) insulated electric cables Part 3: Tests on finished cable

NL-NEN, Cable insulation tga test

• NEN 3172-1979 Paper-insulated lead-covered power cables Construction and testing

Professional Standard - Aerospace, Cable insulation tga test

• QJ 1238.16-1987 Insulation resistance test of cable test method on missile launch vehicle
• QJ 1323.20-1987 Electromagnetic relay test method Insulation resistance test

Taiwan Provincial Standard of the People's Republic of China, Cable insulation tga test

• CNS 689-1988 Method of Test for Plastic Insulated Wires and Cables
• CNS 687-1987 Methods of Test for Rubber Insulated Wires and Cables
• CNS 6041-1985 Methods of Test for Electrical Insulating Papers ,Pressboard and Press Paper
• CNS 6040-1980 Method of Test for Electric Strength of Solid Insulating Materials
• CNS 8785-1988 Method of Test for Electric Strength of Heat Shrinkable Tubing for Electrical Insulation
• CNS 12248-1988 Methods of Test for Pressure-sensitive Adhesive Tapes for Electrical Insulation
• CNS 9084-1982 Method of Test for Woven Tapes for Electrical Insulation
• CNS 9808-1983 Method of Test for Control Gear Insulation
• CNS 3635-1985 Insulation Resistance Testing Method for Electronic Components
• CNS 2604-1988 Method of Test for Varnish for Electrical Insulation
• CNS 12249-1988 Subsidiary Methods of Test for Pressure-Sensitive Adhesive Tapes for Electrical Insulation
• CNS 9082-1982 Testing Method of Silicone Varnish for Electrical Insulation
• CNS 10315-1983 Classification and Test Methods for Insulation of Household Appliances and Equipments
• CNS 14256-1998 Method of test for withstand voltage of personal protective equipment and insulation devices
• CNS 7600-1981 Testing Method of Varnished Cloth and Paper for Electrical Insulation

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Cable insulation tga test

• GB/T 3048.5-2007 Test methods for electrical properties of electric cables and wires.Part 5: Test of insulation resistance
• GB/T 3048.6-1994 Test methods for determining electrical properties of electric cables and wires.Determining insulation resistance.Voltmeter-ammeter method
• GB/T 3048.15-1992 Electric cables and wires--D.C.spark test method for insulated cores
• GB/T 3048.9-1994 Test methods for determining electrical properties of electric cables and wires.A.C. spark test of insulated cores
• GB/T 3048.5-1994 Test methods for determining electrical properties of electric cables and wires.Determining insulation resistance.Comparison-galvanometer method
• GB/T 3048.9-2007 Test methods for electrical properties of electric cables and wires.Part 9: Spark test of insulated cores
• GB/T 10064-1988 Methods of test for the determination of the insulation resistance of solid insulating materials
• GB/T 18380.11-2008 Tests on electric and optical fibre cables under fire conditions.Part 11: Test for vertical flame propagation for a single insulated wire or cable.Apparatus
• GB/T 18380.21-2008 Tests on electric and optical fibre cables under fire conditions.Part 21:Test for vertical flame propagation for a single small insulated wire or cable.Apparatus
• GB/T 10237-1988 Power transformers--Insulation levels and dielectric tests external clearances in air
• GB/T 2951.14-2008 Common test methods for insulating and sheathing materials of electric and optical cables.Part 14:Methods for general application-Test at low temperature
• GB/T 10064-2006 Methods of test for the determination of the insulation resistance of solid insulating materials
• GB 1094.3-1985 Power transformers--Part 3: Insulation levels and dielectric tests
• GB/T 1309-1987 Test methods for varnished fabrics for electrical insulation
• GB/T 7114-1986 Test methods for electrical insulating coated textile sleeving
• GB/T 18380.1-2001 Tests on electric cables under fire conditions Part 1: Test on a single vertical insulated wire or cable
• GB 1094.3-2003 Power transformers Part 3: Insulation levels,dielectric tests and external clearances in air
• GB/T 1094.3-2017 Power transformers - Part 3: Insulation levels, insulation tests and outer insulation air gaps
• GB 5013.2-1997 Rubber insulated cables of rated voltages up to and including 450/750V. Part 2: Test methods
• GB/T 5013.2-2008 Rubber insulated cables of rated voltages up to and including450/750 V.Part 2: Test methods
• GB/T 2951.12-2008 Common test methods for insulating and sheathing materials of electric and optical cables.Part 12:Methods for general application.Thermal ageing methods
• GB/T 18380.12-2008 Test on electric and optical fibre cables under fire conditions.Part 12:Test for vertical flame propagation for a single insulated wire or cable.Procedure for 1kW pre-mixed flame
• GB/T 18380.22-2008 Tests on electric and optical fibre cables under fire conditions.Part 22:Test for vertical flame propagation for a single small insulated wire or cable.Procedure for diffusion flame
• GB/T 5132-1985 Test methods of laminated tubes used for electrical insulation
• GB/T 5134-1985 Test methods of laminated rods used for electrical insulation
• GB/T 12976.3-2008 Paper insulated power cables and their accessories for rated voltages up to and including 35kV (Um=40.5kV) Part 3: Tests for cables and accessories
• GB/T 18380.2-2001 Tests on electric cables under fire conditions Part 2: Test on a single amall vertical insulated copper wire or cable
• GB 5023.2-1997 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V. Part 2: Test methods
• GB/T 5023.2-2008 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V.Part2:Test methods

SE-SIS, Cable insulation tga test

• SIS SS IEC 540:1985 Power cables and cables for house wiring - Test methods for insulations and sheaths of elastomeric and thermoplastic compounds
• SIS SS IEC 189-1:1987 Telecommunication cables - Cables and w/res with PVC-insulation anv PVC-sheath - Testing
• SIS SS IEC 538:1982 Cables for telecommunication - Polyethylene insulation and sheath - Testing
• SIS SS IEC 167:1982 Methods of test for the determination of the insulation resistance of solid insulating materials
• SIS SS 424 02 62-1979 Rubber and thermoplastic insulated cords and cables — Lift cables — Testing
• SIS SS 424 03 11-1987 Cables for portable earthing equipment -EPR-insulated cables, type REU -Testing
• SIS SS IEC 332-1:1985 Cables - Tests on electric cables under fire conditions - Part 1: Test on a single vertical insulated wire or cable

British Standards Institution (BSI), Cable insulation tga test

• BS EN 50289-1-4:2001 Communication cables - Specifications for test methods - Electrical test methods - Insulation resistance
• BS EN 60811-504:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Mechanical tests. Bending tests at low temperature for insulation and sheaths
• BS EN 60512-3-1:2002 Connectors for electronic equipment - Tests and measurements - Insulation tests - Test 3a - Insulation resistance
• BS EN 60811-201:2012 Electric and optical fibre cables. Test methods for non-metallic materials. General tests. Measurement of insulation thickness
• BS EN 60811-508:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Mechanical tests. Pressure test at high temperature for insulation and sheaths
• BS EN 60332-1-1:2005 Tests on electrical and optical cables under fire conditions - Test for a vertical flame propagation for a single insulated wire or cable - Apparatus
• BS EN 60332-1-1:2004 Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus
• BS EN 60332-1-1:2004+A1:2015 Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus
• BS EN 3475-303:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Insulation resistance
• BS EN 60332-2-1:2005 Tests on electric and optical fibre cables under fire conditions - Test for vertical flame propagation for a single small insulated wire or cable - Apparatus
• BS EN 60332-2-1:2004 Tests on electric and optical fibre cables under fire conditions - Part 2-1: Test for vertical flame propagation for a single small insulated wire or cable - Apparatus
• BS EN 60811-506:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Mechanical tests. Impact test at low temperature for insulations and sheaths
• BS EN 60332-2-2:2004 Tests on electric and optical fibre cables under fire conditions - Tests for vertical flame propagation for a single small insulated wire or cable - Procedure for diffusion flame
• BS EN 60811-201:2012+A1:2017 Electric and optical fibre cables. Test methods for non-metallic materials - General tests. Measurement of insulation thickness
• BS EN 60811-505:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Mechanical tests. Elongation at low temperature for insulations and sheaths
• BS 7888-4.1:1998 Test requirements for MV accessories - Accessories for cables with extruded insulation - Section: 4-1: Accessories for cables with extruded insulation
• BS EN 60811-405:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Miscellaneous tests. Thermal stability test for PVC insulations and PVC sheaths
• BS EN 60811-409:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Miscellaneous tests. Loss of mass test for thermoplastic insulations and sheaths
• BS EN 60811-509:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Mechanical tests. Test for resistance of insulations and sheaths to cracking (heat shock test)
• BS EN 60811-508:2012+A1:2017 Electric and optical fibre cables. Test methods for non-metallic materials - Mechanical tests. Pressure test at high temperature for insulation and sheaths
• BS EN 60811-502:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Mechanical tests. Shrinkage test for insulations
• BS 7870-2:1999 LV and MV polymeric insulated cables for use by distribution and generation utilities - Methods of test
• BS 7870-2:2011 LV and MV polymeric insulated cables for use by distribution and generation utilities. Methods of test
• BS 7888-4.2:1998 LV and MV accessories for power cables with rated voltage from 0.6/1 kV (Um=1.2 kV) up to and including 20.8/36 kV (Um=42 kV) - Test requirements for MV accessories - Accessories for cables with impregnated paper insulation
• BS EN 60332-1-2:2004 Tests on electric and optical fibre cables under fire conditions - Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame
• BS EN 60811-509:2012+A1:2017 Electric and optical fibre cables. Test methods for non-metallic materials - Mechanical tests. Test for resistance of insulations and sheaths to cracking (heat shock test)
• BS EN 60426:2007 Electrical insulating materials - Determination of electrolytic corrosion caused by insuating materials - Test methods
• BS 6622:2007 Electric cables - Armoured cables with thermosetting insulation for rated voltages from 3.8/6.6 kV to 19/33 kV - Requirements and test methods
• BS EN 60811-410:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Miscellaneous tests. Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors

CZ-CSN, Cable insulation tga test

• CSN 34 7010 Cast.44-1972 Ozone resistance test of cable insulation
• CSN 34 6469-1987 Testing methods of electrical insulating
• CSN IEC 167:1993 Methods of test for the determination of the insultation resistance of solid insultating materials
• CSN 34 6471-1986 Test methods for electric insulating materials. Test method for determination of resistance insulating materials to high-voltage arc
• CSN 35 0012-1971 Dielectric tests of windings of rotating electrical machinery
• CSN 34 6460-1983 Methods of test for the determination of the d. c. insulation resistance of solid insulating materials
• CSN 34 7410-2 ZA11-1998
• CSN 34 6410-1961 Tost for evaluating the thermal endurance of electrical insulating materials

European Committee for Electrotechnical Standardization（CENELEC）, Cable insulation tga test

• HD 405.1-1985 Test on Electric Cables Under Fire Conditions Part 1: Test on a Single Vertical Insulated Wire or Cable
• prHD 629.3 S1 Test requirements for accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42) kV Part 3: Transition joints between cables with impregnated paper insulation and cables with extruded insulation
• EN 50289-1-4:2001 Communication Cables - Specifications for Test Methods Part 1-4: Electrical Test Methods - Insulation Resistance
• EN 60811-201:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 201: General tests - Measurement of insulation thickness
• EN 60811-509:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 509: Mechanical tests - Test for resistance of insulations and sheaths to cracking (heat shock test)
• EN 60811-504:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 504: Mechanical tests - Bending tests at low temperature for insulation and sheaths
• EN 60811-405:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 405: Miscellaneous tests - Thermal stability test for PVC insulations and PVC sheaths
• EN 60512-3-1:2002 Connectors for electronic equipment Tests and measurements Part 3-1: Insulation tests Test 3a: Insulation resistance
• HD 22.2 S2/A11-1995 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 2: Test Methods
• HD 22.2 S2/ A9-1993 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 2: Test Methods
• HD 22.2 S2/A10-1995 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 2: Test Methods
• EN 60811-505:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 505: Mechanical tests - Elongation at low temperature for insulations and sheaths

International Electrotechnical Commission (IEC), Cable insulation tga test

• IEC 61196-1-102:2005 Coaxial communication cables - Part 1-102: Electrical test methods - Test for insulation resistance of cable dielectric
• IEC 60332-1:1993 Tests on electric cables under fire conditions; part 1: test on a single vertical insulated wire or cable
• IEC 60811-502:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 502: Mechanical tests - Shrinkage test for insulations
• IEC 60332-2:1989 Tests on electric cables under fire conditions; part 2: test on a single small vertical insulated copper wire or cable
• IEC 60811-504:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 504: Mechanical tests - Bending tests at low temperature for insulation and sheaths
• IEC 60811-506:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 506: Mechanical tests - Impact test at low temperature for insulations and sheaths
• IEC 60811-201:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 201: General tests - Measurement of insulation thickness
• IEC 60811-201:2017 Electric and optical fibre cables - Test methods for non-metallic materials - Part 201: General tests - Measurement of insulation thickness
• IEC 60332-1-1:2015 Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus
• IEC 60332-1-1:2004+AMD1:2015 CSV Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus
• IEC 60811-508:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths
• IEC 60811-508:2017 Electric and optical fibre cables - Test methods for non-metallic materials - Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths
• IEC 60811-505:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 505: Mechanical tests - Elongation at low temperature for insulations and sheaths
• IEC 60512-3-1:2002 Connectors for electronic equipment - Tests and measurements - Part 3-1: Insulation tests; Test 3a: Insulation resistance
• IEC 60811-509:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 509: Mechanical tests - Test for resistance of insulations and sheaths to cracking (heat shock test)
• IEC 60811-509:2017 Electric and optical fibre cables - Test methods for non-metallic materials - Part 509: Mechanical tests - Test for resistance of insulations and sheaths to cracking (heat shock test)
• IEC 60167:1964 Methods of test for the determination of the insulation resistance of solid insulating materials
• IEC 60332-1-1:2004 Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus
• IEC 60811-201:2012+AMD1:2017 CSV Electric and optical fibre cables - Test methods for non-metallic materials - Part 201: General tests - Measurement of insulation thickness
• IEC 60811-409:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 409: Miscellaneous tests - Loss of mass test for thermoplastic insulations and sheaths
• IEC 60245-2:1994 Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 2: Test methods
• IEC 60811-508:2012+AMD1:2017 CSV Electric and optical fibre cables - Test methods for non-metallic materials - Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths
• IEC 60332-2-1:2004 Tests on electric and optical fibre cables under fire conditions - Part 2-1: Test for vertical flame propagation for a single small insulated wire or cable - Apparatus
• IEC 60811-509:2012+AMD1:2017 CSV Electric and optical fibre cables - Test methods for non-metallic materials - Part 509: Mechanical tests - Test for resistance of insulations and sheaths to cracking (heat shock test)
• IEC 60811-201:2012/AMD1:2017 Electric and optical fibre cables - Test methods for non-metallic materials - Part 201: General tests - Measurement of insulation thickness; Amendment 1
• IEC 60426:2007 Electrical insulating materials - Determination of electrolytic corrosion caused by insulating materials - Test methods
• IEC 60245-2:1980 Rubber insulated cables of rated voltages up to and including 450/750 V. Part 2 : Test methods
• IEC 60245-2:1998 Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 2: Test methods
• IEC 60332-1-1:2004/AMD1:2015 Amendment 1 - Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus
• IEC 60227-2:1997 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 2: Test methods
• IEC 60227-2:2003 Polyvinyl chloride insulated cables of rated voltages up to and including450/750V-Part2:Test methods
• IEC 60227-2:1997+AMD1:2003 CSV Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 2: Test methods
• IEC 60332-1-2:2004+AMD1:2015 CSV Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame
• IEC 60332-1-3:2004+AMD1:2015 CSV Tests on electric and optical fibre cables under fire conditions - Part 1-3: Test for vertical flame propagation for a single insulated wire or cable - Procedure for determination of flaming droplets/
• IEC 60811-501:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Cable insulation tga test

• GB/T 17737.102-2018 Coaxial communication cables—Part 1-102: Electrical test methods—Test for insulation resistance of cable dielectric
• GB/T 33343-2016 Test methods of insulated electric wires for aerospace

Korean Agency for Technology and Standards (KATS), Cable insulation tga test

• KS C IEC 60811-201:2020 Electric and optical fibre cables — Test methods for non-metallic Electric and optical fibre cables — Test methods for non-metallic insulation thickness
• KS C IEC 60332-2:2003 Tests on electric cables under fire conditions-Part 2:Test on a single small vertical insulated copper wire or calbe
• KS C IEC 60332-2:2014 Tests on electric cables under fire conditions－Part 2：Test on a single small vertical insulated copper wire or calbe
• KS C 2101-2006 Testing methods of electrical insulating oils
• KS C IEC 60332-1:2002 Tests on electric cables under fire conditions-Part 1:Test on a single vertical insulated wire or cable
• KS C IEC 60332-1:2014 Tests on electric cables under fire conditions－Part 1：Test on a single vertical insulated wire or cable
• KS C 2005-1998 TEST METHOD FOR INSULATION RESISTIVITY OF SOLID ELECTRICAL INSULATING MATERIALS
• KS C 2005-2003 TEST METHOD FOR INSULATION RESISTIVITY OF SOLID ELECTRICAL INSULATING MATERIALS
• KS C 2101-2022 Testing methods of electrical insulating oils
• KS C IEC 60332-2-2003(2008) Tests on electric cables under fire conditions－Part 2：Test on a single small vertical insulated copper wire or calbe
• KS C IEC 60512-3-1:2002 Connectors for electronic equipment-Tests and measurements-Part 3-1:Insulation tests-Test 3a:Insulation resistance
• KS C IEC 60512-3-1:2014 Connectors for electronic equipment-Tests and measurements-Part 3-1:Insulation tests-Test 3a:Insulation resistance
• KS C 2312-2003 Testing methods of varnishes for electrical insulation
• KS C 2312-1987 Testing methods of varnishes for electrical insulation
• KS C IEC 60811-509:2015 Electric and optical fibre cables — Test methods for non-metallic materials — Part 509: Mechanical tests — Test for resistance of insulations and sheaths to cracking (heat shock test)
• KS C IEC 60167:2002 Methods of test for the determination of the insulation resistance of solid insulating materials
• KS C IEC 60167:2017 Methods of test for the determination of the insulation resistance of solid insulating materials
• KS C IEC 60512-3-1-2002(2013) Connectors for electronic equipment－Tests and measurements－Part 3－1：Insulation tests－Test 3a：Insulation resistance
• KS C 3005-2003 Testing method of electrical insulating compounds
• KS C 2402-1994 Testing methods of tubing for electrical insulation
• KS C 2402-2004 TESTING METHODS OF TUBING FOR ELECTRICAL INSULATION
• KS C 2402-1994(1999) TESTING METHODS OF TUBING FOR ELECTRICAL INSULATION
• KS C 3005-1985 Testing method of electrical insulating compounds
• KS C IEC 60245-2:2021 Rubber insulated cables — Rated voltages up to and including 450/750 V — Part 2: Test methods
• KS C IEC 60245-2-2006(2016) Rubber insulated cables－Rated voltages up to and including 450/750 V－Part 2：Test methods
• KS C IEC 60245-2:2006 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 2:Test methods
• KS C 2127-1996 Testing method for proof-voltage testing of thin solid electrical insulating materials
• KS C 2115-2003 Testing methods of ceramic insulators for electricaland electronic applications
• KS C 2104-1993 Testing methods for electrical insulating mica products
• KS C 2102-2002 TESTING METHODS OF PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL INSULATION
• KS C 2115-1978 Testing methods of ceramic insulators for electricaland electronic applications
• KS C 2102-1987 TESTING METHODS OF PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL INSULATION
• KS C IEC 60332-2-2:2014 Tests on electric and optical fibre cables under fire conditions ㅡ Part 2-2: Test for vertical flame propagation for a single small insulated wire or cable — Procedure for diffusion flame
• KS C IEC 60332-1-2:2014 Tests on electric and optical fibre cables under fire conditions ㅡ Part 1-2: Test for vertical flame propagation for a single insulated wire or cable – Procedure for 1 kW pre-mixed flame
• KS C IEC 60227-2-2016(2021) Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V－Part 2：Test methods
• KS C IEC 60811-502-2014(2019) Electric and optical fibre cables — Test methods for non-metallic materials — Part 502: Mechanical tests — Shrinkage test for insulations
• KS C IEC 60464-2:2003 Varnishes used for electrical insulation-Part 2:Methods of test
• KS C 3004-2008 Testing methods for rubber or plastic insulated wires and cables
• KS C 2138-2005 Test methods of coating powders for electrical insulation
• KS C 2138-2000 Test methods of coating powders for electrical insulation

KR-KS, Cable insulation tga test

• KS C IEC 60811-201-2020 Electric and optical fibre cables — Test methods for non-metallic Electric and optical fibre cables — Test methods for non-metallic insulation thickness
• KS C 2101-2017(英文版) Testing methods of electrical insulating oils
• KS C 2313-2003(2023)
• KS C IEC 60245-2-2021 Rubber insulated cables — Rated voltages up to and including 450/750 V — Part 2: Test methods
• KS C 2312-2003(2023)
• KS C IEC 61238-1-2-2023 Compression and mechanical connectors for power cables — Part 1-2: Test methods and requirements for insulation piercing connectors for power cables for rated voltages up to 1 kV(Um = 1.2 kV) tested o
• KS C IEC 60227-2-2016 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V－Part 2：Test methods

IN-BIS, Cable insulation tga test

• IS 10810 Pt.27-1984
• IS 10810 Pt.24-1984
• IS 10810 Pt.25-1984
• IS 10810 Pt.9-1984
• IS 10810 Pt.43-1984

Japanese Industrial Standards Committee (JISC), Cable insulation tga test

• JIS C 3005:2014 Test methods for rubber or plastic insulated wires and cables
• JIS C 3005:2000 Test methods for rubber or plastic insulated wires and cables
• JIS C 3665-1:1998 Tests on electric cables under fire conditions -- Part 1: Test on a single vertical insulated wire or cable
• JIS C 3665-1-1:2007 Tests on electric and optical fibre cables under fire conditions -- Part 1-1: Test for vertical flame propagation for a single insulated wire or cable -- Apparatus
• JIS C 3005 ERRATUM 1:2001 Test methods for rubber or plastic insulated wires and cables (Erratum 1)
• JIS C 3005 ERRATUM 2:2001 Test methods for rubber or plastic insulated wires and cables (Erratum 2)
• JIS C 5402-3-1:2005 Connectors for electronic equipment -- Tests and measurements -- Part 3-1: Insulation tests -- Test 3a: Insulation resistance
• JIS C 2103:1991 Testing methods of varnishes for electrical insulation
• JIS C 2101:1993 Testing methods of electrical insulating oils
• JIS C 2133:1992 Testing methods of tubing for electrical insulation
• JIS C 2101:1999 Testing methods of electrical insulating oils
• JIS C 2110:1994 Testing methods for electric strength of solid insulating materials
• JIS C 1301:1977 Insulation resistance testers (magneto generator operated)
• JIS C 2110-1:2010 Solid electrical insulating materials -- Test methods for electric strength -- Part 1: Tests at power frequencies
• JIS C 2110-1:2016 Solid electrical insulating materials -- Test methods for electric strength -- Part 1: Tests at power frequencies
• JIS C 2130:1975 Testing method of woven tapes for electrical insulation
• JIS C 2110-3:2010 Solid electrical insulating materials -- Test methods for electric strength -- Part 3: Tests using impulse voltage
• JIS C 2110-2:2010 Solid electrical insulating materials -- Test methods for electric strength -- Part 2: Tests using direct voltage
• JIS C 2110-2:2016 Solid electrical insulating materials -- Test methods for electric strength -- Part 2: Tests using direct voltage
• JIS C 2110-3:2016 Solid electrical insulating materials -- Test methods for electric strength -- Part 3: Tests using impulse voltage
• JIS C 3663-2:1998 Rubber insulated cables -- Rated voltages up to and including 450/750 V -- Part 2: Test methods
• JIS C 3801-2:1999 Testing method for insulators -- Part 2: Post insulators for station
• JIS C 3662-2:2009 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V -- Part 2: Test methods
• JIS C 2116:1992 Testing methods for electrical insulating mica products
• JIS C 3005:1993 Test methods for rubber or plastic insulated wires and cables

Liaoning Provincial Standard of the People's Republic of China, Cable insulation tga test

• DB21/T 2078-2013 General test method for wire and cable - measurement of insulation thickness

Defense Logistics Agency, Cable insulation tga test

• DLA FED-STD-228 CHG NOTICE 5-2000 CABLE AND WIRE, INSULATED; METHODS OF TESTING

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Cable insulation tga test

• IEEE 83-1963 Test Procedure for Radial Power Factor Tests on Insulating Tapes in Paper-Insulated Power Cable

Danish Standards Foundation, Cable insulation tga test

• DS/EN 60811-502:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 502: Mechanical tests - Shrinkage test for insulations
• DS/EN 60811-201:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 201: General tests - Measurement of insulation thickness
• DS/EN 60332-1-1:2005 Tests on electric and optical fibre cables under fire conditions -- Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus
• DS/EN 60811-509:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 509: Mechanical tests - Test for resistance of insulations and sheaths to cracking (heat shock test)
• DS 2393-2:1996 Polyvinyl chloride insulated sheathed cables of rated voltages up to and including 450/750 V - Test methods
• DS/EN 60811-508:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths
• DS/EN 60811-504:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 504: Mechanical tests - Bending tests at low temperature for insulation and sheaths
• DS/EN 60811-506:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 506: Mechanical tests - Impact test at low temperature for insulations and sheaths
• DS/EN 60332-2-1:2005 Tests on electric and optical fibre cables under fire conditions -- Part 2-1: Test for vertical flame propagation for a single small insulated wire or cable - Apparatus
• DS/EN 3475-303:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 303: Insulation resistance
• DS/EN 60811-405:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 405: Miscellaneous tests - Thermal stability test for PVC insulations and PVC sheaths
• DS/EN 60332-1-2:2020 Tests on electric and optical fibre cables under fire conditions – Part 1-2: Test for vertical flame propagation for a single insulated wire or cable – Procedure for 1 kW pre-mixed flame
• DS/EN 60426:2007 Electrical insulating materials - Determination of electrolytic corrosion caused by insulating materials - Test methods
• DS/HD 22.2 S2+A5-A9:1995 Rubber insulated cables of rated voltages up to and including 450/750 V - Part 2: Test methods
• DS/HD 633 S1:1999 Test on oil-filled, paper-insulated, metal-sheathed cables and accessories for alternating voltages up to and including 400 kV
• DS/EN 60811-505:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 505: Mechanical tests - Elongation at low temperature for insulations and sheaths
• DS/EN 50375:2002 Testing methodology for wipers used in electrical insulating oil
• DS/EN 50209:1999 Test of insulation of bars and coils of high-voltage machines

AENOR, Cable insulation tga test

• UNE-EN 60811-502:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 502: Mechanical tests - Shrinkage test for insulations
• UNE 21306:1976 METHODS OF TEST FOR THE DETERMINATION OF THE INSULATION RESISTANCE OF OLID INSULATING MATERIALS.
• UNE-EN 60811-201:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 201: General tests - Measurement of insulation thickness
• UNE-EN 60332-1-1:2005 Tests on electric and optical fibre cables under fire conditions -- Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus
• UNE-EN 60332-1-1:2005/A1:2016 Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus
• UNE-EN 60811-509:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 509: Mechanical tests - Test for resistance of insulations and sheaths to cracking (heat shock test)
• UNE-EN 60811-508:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths
• UNE-EN 60811-504:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 504: Mechanical tests - Bending tests at low temperature for insulation and sheaths
• UNE-EN 60811-506:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 506: Mechanical tests - Impact test at low temperature for insulations and sheaths
• UNE-EN 60332-2-1:2005 Tests on electric and optical fibre cables under fire conditions -- Part 2-1: Test for vertical flame propagation for a single small insulated wire or cable - Apparatus
• UNE-EN 60811-405:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 405: Miscellaneous tests - Thermal stability test for PVC insulations and PVC sheaths
• UNE-EN 60811-505:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 505: Mechanical tests - Elongation at low temperature for insulations and sheaths
• UNE-EN 50375:2004 Testing methodology for wipers used in electrical insulating oil

CENELEC - European Committee for Electrotechnical Standardization, Cable insulation tga test

• EN 60811-502:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 502: Mechanical tests - Shrinkage test for insulations
• EN 60811-506:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 506: Mechanical tests - Impact test at low temperature for insulations and sheaths
• EN 60811-508:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths
• EN 60426:2007 Electrical insulating materials - Determination of electrolytic corrosion caused by insulating materials - Test methods

BE-NBN, Cable insulation tga test

• NBN I-983-1969
• NBN I-982-1969
• NBN-HD 405.2-1994 Tests on electric cables under fire conditions. Part 2: Test on a single small vertical insulated copper wire or cable

European Committee for Standardization (CEN), Cable insulation tga test

• HD 405.1 S1-1983 Test on electric cables under fire condition; part 1: test on a single vertical insulated wire or cable
• HD 405.1 S1 A1-1992 Tests on electric cables under fire conditions; part 1: test on a single vertical insulated wire or cable (IEC 332-1:1979, modified)
• HD 405.2 S1-1991 Tests on electric cables under fire conditions; part 2: test on a single small vertical insulated copper wire or cable (IEC 332-2:1989)

YU-JUS, Cable insulation tga test

• JUS N.C0.060-1980 Testing ofinsulated conductors and cables. Degree of cross-linking
• JUS N.C0.058-1980 Testing of insulated cords and cables. Thermal stability
• JUS N.C0.076-1995 Testing of insylated cords and cables - Ozone resistance
• JUS N.H1.013-1985 Power transformers. Insulation levek and dielectric tests
• JUS N.C0.048-1985 Electrical power and lighting. Testing of insulated conductors and cables. Separability of cores of flat twin insulated conductors
• JUS N.C0.074-1987 Electric povver and lighting. Testing of insulated conductors and cables. Resistance to oil
• JUS N.C0.073-1985 Electricpower andlighting. Testing otinsulatedconductors andcables. Absorption of watsr
• JUS N.C0.075-1984 Electrical pover and lighting. Testing of insulated conductors and cables. Fire resistance
• JUS N.C0.031-1987 Electric povver and lighting. Testing of insulated conductors and cables. Checking of construction
• JUS N.H1.113-1990 Power transformers. Insulation levels and dielectric tescs. Extemal clearances in air
• JUS N.C0.082-1990 Electric povverandlighting. Testing ofinsu/atedconductors andcables. Tinning ofplain conductors

Professional Standard - Railway, Cable insulation tga test

• TB/T 1919-1987 PL type combined cable insulation test panel

未注明发布机构, Cable insulation tga test

• BS 4066-1:1980(1998)*IEC 332-1:1979 Tests on electric cables under fire conditions — Part 1 : Method of test on a single vertical insulated wire or cable
• DIN EN 60811-1-2-DIN VDE 0473 Teil 811-1-2:2001 Insulating and sheathing materials for cables and insulated lines General test methods Part 1: General application – Main section 2: Thermal aging
• BS EN 60332-2-1:2004(2005) Tests on electric and optical fibre cables under fire conditions — Part 2 - 1 : Test for vertical flame propagation for a single small insulated wire or cable — Apparatus

RU-GOST R, Cable insulation tga test

• GOST 30328-1995 Electrical relays. Insulation test
• GOST R IEC 811-1-4-1994 General test methods for insulating and sheathing materials of electric cables. Tests at low temperature
• GOST 23286-1978 Cables, wires and cords. Standards for insulation and sheath thickness and voltage tests
• GOST R IEC 332-1-1996 Test on cables under fire conditions. Test on a single vertical insulated wire or cable
• GOST R IEC 227-2-1994 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Test methods
• GOST R IEC 60245-2-2002 Rubber insulated cables of rated voltages up to and including 450/750 V. Test methods
• GOST IEC 60811-502-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 502. Mechanical tests. Shrinkage test for insulations
• GOST R IEC 60811-3-1-1994 Test methods specific to PVC insulating and sheathing compaunds of electric and optical cables. Pressure test at high temperature. Test for resistance to cracking
• GOST IEC 60811-201-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 201. General tests. Measurement of insulation thickness
• GOST IEC 60245-2-2011 Rubber insulated cables of rated voltages up to and including 450/750 V. Test methods
• GOST IEC 60332-1-1-2011 Tests on electric and optical fibre cables under fire conditions. Part 1-1. Test for vertical flame propagation for a single insulated wire or cable. Apparatus
• GOST 28019-1989 Adhesive tape for electrical insulation. Test methods
• GOST R IEC 332-2-1996 Tests on cables under fire conditions. Test on a single small vertical insulated copper wire or cable
• GOST R IEC 811-1-2-1994 Common test methods for insulating and sheathing materials of electric cables. Termal ageing methods
• GOST IEC 60811-504-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 504. Mechanical tests. Bending tests at low temperature for insulation and sheaths
• GOST IEC 60811-505-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 505. Mechanical tests. Elongation tests at low temperature for insulation and sheaths
• GOST IEC 60811-506-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 506. Mechanical tests. Impact test at low temperature for insulations and sheaths
• GOST IEC 60811-508-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 508. Mechanical tests. Pressure test at high temperature for insulation and sheaths
• GOST IEC 60811-509-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 509. Mechanical tests. Test for resistance of insulations and sheaths to cracking (heat shock test)
• GOST IEC 60332-2-1-2011 Tests on electric and optical fibre cables under fire conditions. Part 2-1. Test for vertical flame propagation for a single small insulated wire or cable. Apparatus

(U.S.) Ford Automotive Standards, Cable insulation tga test

• FORD FLTM BB 101-14-2000 INSULATION COMPRESSION TEST OF AUTOMOTIVE ELECTRICAL CABLE AT HIGH TEMPERATURE

United States Navy, Cable insulation tga test

• NAVY MIL-STD-2223 CHG NOTICE 1-1994 INSULATED ELECTRIC WIRE, TEST METHODS FOR

Group Standards of the People's Republic of China, Cable insulation tga test

• T/CEC 517-2021 Partial discharge test method for 160kV～500kV extruded insulated DC cable system
• T/CSEE 0231-2021 Guidelines for on-site AC withstand voltage test of XLPE insulated power cables
• T/CEC 117-2016 160kV~500kV Extruded Insulated DC Cable System Operation Maintenance and Test Guidelines
• T/CEC 243-2019 10 (6) kV~35kV extruded insulation power cable system ultra-low frequency (0.1Hz) field test method
• T/GDAQI 74-2021 Test methods for insulating and sheathing materials of electric and optical cables—Automatic measurement of thickness and overall dimensions
• T/GDAQI 58-2021 Displacement sensing test method of pressure test at high temperature for PVC compounds insulating and sheathing material of electric and optical cables

国家市场监督管理总局、中国国家标准化管理委员会, Cable insulation tga test

• GB/T 18380.11-2022 Tests on electric and optical fibre cables under fire conditions—Part 11:Test for vertical flame propagation for a single insulated wire or cable—Apparatus
• GB/T 18380.12-2022 Tests on electric and optical fibre cables under fire conditions—Part 12:Test for vertical flame propagation for a single insulated wire or cable—Procedure for 1 kW pre-mixed flame

Professional Standard - Machinery, Cable insulation tga test

• JB/T 9588.4-1999 Test method for ceramic insulators of spark plug.Test method for heat insulating resistance
• JB/T 12422-2015 Test method for partial discharge of electrical insulating materials and insulating parts
• JB/T 4278.5-2011 Verification procedure for test equipment of rubber plastic wire and cable.Part 5: Single insulated wire and cable vertical burning test device
• JB/T 7082-1993 Dielectric withstand testing instruments for insulating medium
• JB/T 7082-2013 Dielectric voltage-withstand tester
• JB/T 4278.19-2011 Verification procedure for test equipment of rubber plastic wire and cable.Part 19: Insulation scrape abrasion test device
• JB/T 4278.18-2011 Verification procedure for test equipment of rubber plastic wire and cable.Part 18: Copper single insulated wire and cable vertical burning test device

Professional Standard - Automobile, Cable insulation tga test

• QC/T 435-1999 Test method for spark plug porcelain insulator High temperature insulation resistance test method

Professional Standard - Electricity, Cable insulation tga test

• DL/T 2221-2021 160kV~500kV extruded insulation DC cable system pre-qualification test method
• DL/T 474.1-2006 Guide for insulation test on site Insulation resistance、dielectric absorption ratio and polarization index test
• DL/T 474.1-2018 Insulation Resistance, Absorption Ratio and Polarization Index Tests
• DL 474.1-1992 Insulation Resistance, Absorption Ratio and Polarization Index Tests

BR-ABNT, Cable insulation tga test

• ABNT NBR 9150-2013 Wire and cables for telecommunication — Separation of insulated conductors — Test method

Lithuanian Standards Office , Cable insulation tga test

• LST EN 60811-502-2012 Electric and optical fibre cables - Test methods for non-metallic materials -- Part 502: Mechanical tests - Shrinkage test for insulations (IEC 60811-502:2012)
• LST EN 60811-509-2012 Electric and optical fibre cables - Test methods for non-metallic materials -- Part 509: Mechanical tests - Test for resistance of insulations and sheaths to cracking (heat shock test) (IEC 60811-509:2012)
• LST EN 3475-303-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 303: Insulation resistance
• LST HD 568 S1-2002 Methods of test for the determination of the insulation resistance of solid insulating materials (IEC 60167:1964)
• LST EN 60811-201-2012 Electric and optical fibre cables - Test methods for non-metallic materials -- Part 201: General tests - Measurement of insulation thickness (IEC 60811-201:2012)
• LST EN 50375-2003 Testing methodology for wipers used in electrical insulating oil
• LST EN 50209-2001 Test of insulation of bars and coils of high-voltage machines

SAE - SAE International, Cable insulation tga test

• SAE AS4373C-2007 Test Methods for Insulated Electric Wire
• SAE AS4373-1990 Test Methods for Insulated Electric Wire
• SAE AS4373A-1998 Test Methods for Insulated Electric Wire
• SAE ARD50006-1993 TEST METHODS FOR INSULATED ELECTRIC WIRE
• SAE AS4373D-2010 Test Methods for Insulated Electric Wire

Society of Automotive Engineers (SAE), Cable insulation tga test

• SAE AS4373-1995 TEST METHODS FOR INSULATED ELECTRIC WIRE
• SAE AS4373B-2001 Test Methods for Insulated Electric Wire
• SAE AS4373F-2020 Test Methods for Insulated Electric Wire
• SAE AS4373E-2012 Test Methods for Insulated Electric Wire

FI-SFS, Cable insulation tga test

• SFS 2820-1977
• SFS 4879-1982

VN-TCVN, Cable insulation tga test

• TCVN 6614-1-4-2008 Common test methods for insulating and sheathing materials of electric cables and optical cables.Part 1-4: Methods for general application.Test at low temperature
• TCVN 6613-1-1-2010 Tests on electric and optical fibre cables under fire conditions.Part 1-1: Test for vertical flame propagation for a single insulated wire or cable.Apparatus
• TCVN 6613-2-1-2010 Tests on electric and optical fibre cables under fire conditions.Part 2-1: Test for vertical flame propagation for a single small insulated wire or cable..Apparatus
• TCVN 5936-1995 Test methods for insulations and sheaths of electric cables and cords (Elastomeric and thermoplastic compounds)
• TCVN 5631-1991 Adhesive tapes for electrical insulation.Test methods
• TCVN 6306-3-2006 Power transformers.Part 3: Insulation levels and dielectric tests and external clearances in air
• TCVN 6614-1-2-2008 Common test methods for insulating and sheathing materials of electric cables and optical cables.Part 1-2: Methods for general application.Thermal ageing methods
• TCVN 6610-2-2007 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V.Part 2: Test methods

Anhui Provincial Standard of the People's Republic of China, Cable insulation tga test

• DB34/T 1564-2011 The DC High Voltage Experimental Method for the Solid Insualtion on Superconducting Cable under Paschen Condition

中华人民共和国国家质量监督检验检疫总局, Cable insulation tga test

• GB/T 1094.3-2003 Power transformers--Part 3: Insulation levels，dielectric tests and external clearances in air

TH-TISI, Cable insulation tga test

• TIS 955.2-2010 Rubber insulated cables.rated voltages up to and including 450/750 v.part 2: test methods
• TIS 11.2-2010 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 v.part 2: test methods

European Association of Aerospace Industries, Cable insulation tga test

• AECMA PREN 3475-303-1992 Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 303 - Insulation Resistance Issue P 1

PT-IPQ, Cable insulation tga test

• NP 3324-1987

AT-ON, Cable insulation tga test

• ONORM E 3651-1993 Tests on electric cables under fire condition - Part 1: Test on a Single vertical insulated wire or cable (IEC 332-1:1979, modified)
• ONORM E 3653-1990 Tests on cables, wires and cords; dielectric strength underfire conditions

RO-ASRO, Cable insulation tga test

• STAS SR EN 60811-4-1-1995 Insulating and sheathing materials of electric cabtes Common test methods
• STAS SR HD 22.2 S2+A5+A6+A7+A8+A9-1995 Rubber insuiated cables of ra?ed voltages up ?o and including 480/750 Part 2: Tas? methods

Professional Standard - Post and Telecommunication, Cable insulation tga test

• YD/T 837.5-1996 Test method of copper-core, polyolefin insulated, composite aluminum-plastic sheathed cables for urban local communications Part 5 Test method of cable structure

Indonesia Standards, Cable insulation tga test

• SNI IEC 60245-2:2010 Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 2: Test methods
• SNI 04-6271-2000 Test methods for power cables with extruded insulation for rated voltage above 30 kV (Um=36 kV) up to 150 kV (Um=170 kV)

AR-IRAM, Cable insulation tga test

• IRAM 2142-1959

ES-AENOR, Cable insulation tga test

• UNE 21-117-1990
• UNE 21-117-1-1990

CU-NC, Cable insulation tga test

• NC 62-36-1987 Electric Industry. Wires and Cables with an Insulation up to 1 kV. Mechanical Tests

邮电部, Cable insulation tga test

• YD/T 0837.4-1996 Test methods for copper-polyolefin-core insulated aluminum-plastic composite sheathed local copper-core cables
• YD/T 0837.3-1996 Test methods for copper-polyolefin-core insulated aluminum-plastic composite sheathed local copper-core cables
• YD/T 0837.5-1996 Test methods for copper-polyolefin-core insulated aluminum-plastic composite sheathed local copper-core cables

Professional Standard - Petrochemical Industry, Cable insulation tga test

• SH/T 0304-1999 Electrical insulating oils.Detection of corrosive sulfur

Others:   General test methods for insulation and sheathing materials of electrical and optical cables, General test methods for cable insulation and sheath materials, General test methods for cable insulation and sheath materials, Cable insulation tga test, Test method for insulation resistance of wire and cable.