ZH
RU
ES

plastic.int

plastic.int, Total:500 items.

In the international standard classification, plastic.int involves: Plastics, Wastes, Rubber and plastics products, Pipeline components and pipelines, Footwear, Reinforced plastics, Aircraft and space vehicles in general, Materials for aerospace construction, Valves, Road engineering, Welding, brazing and soldering, Equipment for the chemical industry, Installations in buildings, Conducting materials, Farm buildings, structures and installations, Construction materials, Chipless working equipment, Adhesives, Office machines, Bottles. Pots. Jars, Linear and angular measurements, Miscellaneous domestic and commercial equipment, Protective equipment, Kitchen equipment, Analytical chemistry, Vocabularies, Materials and articles in contact with foodstuffs, Cans. Tins. Tubes, Road vehicle systems, Company organization and management, Farming and forestry, Protection against fire.

GM North America, plastic.int

GM GM7001M-2001 Plastic Molding Compounds
GM GM6060M-1986 ABS Plastic Molding Compounds Replaced by GM7001M
GM GM6066M-1986 San Plastic Molding Compounds Replaced by GM7001M
GM GM6264M-1998 Plastic Fuel and Vapor Lines, Plastic Fuel Filters, Plastic Clips and Studs
GM GM6063M-1986 Nylon Plastic Molding Compounds Replaced by GM6063M
GM GM6061M-1986 Acetal Plastic Molding Compounds Replaced by GM7001M
GM 9985198-1989 SEALER, PLASTISOL, VINYL
GM GM6062M-1986 Propylene Plastic Molding Compounds Replaced by GM7001M
GM GM7400M-2001 Plastics Parts
GM GM7000M-1988 Plastic Parts
GM GM9306P-1988 Ash Content of Plastic Materials
GM GM6064M-1986 Polyethylene Plastic Molding Compounds Replaced by GM7001M
GM GM6065M-1986 Polystyrene Plastic Molding Compounds Replaced by GM7001M
GM GM6069M-1986 Polycarbonate Plastic Molding Compounds Replaced by GM7001M

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, plastic.int

GB/T 9352-2008 Plastic.Compression moulding of test specimens of thermoplastic materials
GB/T 5471-2008 Plastic.Compression moulding of test specimens of thermosetting materials
GB/T 14486-1993 Dimensional tolerances for plastic engineering moulded plastic pats
GB/T 17037.4-2003 Plastic--Injection moulding of test specimens of thermoplastic materials--Part 4: Determination of moulding shrinkage
GB/T 17037.3-2003 Plastics--Injection moulding of test specimens of thermoplastic materials--Part 3: Small plates
GB/T 27725-2011 Butterfly valves of thermoplastics materials
GB 1404.3-2008 Plastics-Phenolic powder moulding compounds-Part 3:Requirements for selectes moulding compounds
GB1404.3-2008 Plastics-Phenolic powder moulding compounds-Part 3:Requirements for selectes moulding compounds
GB 1404.3-2008 Plastics-Phenolic powder moulding compounds-Part 3:Requirements for selectes moulding compounds
GB/T 8324-2008 Plastics.Determination of bulk factor of moulding materials
GB/T 28494-2012 Globe valves of thermoplastics materials
GB/T 9352-1988 Plastics--Compression moulding test specimens of thermoplastic materials

International Organization for Standardization (ISO), plastic.int

ISO 294:1975 Plastics; Injection moulding test specimens of thermoplastic materials
ISO 294:1995 Plastics - Injection moulding of test specimens of thermoplastic materials
ISO 2112:1977 Plastics — Aminoplastic moulding materials — Specification
ISO 23559:2011 Plastics - Film and sheeting - Guidance on the testing of thermoplastic films
ISO/FDIS 3671:2004 Plastics — Aminoplastic moulding materials — Determination of volatile matter
ISO 3671:2023 Plastics — Aminoplastic moulding materials — Determination of volatile matter
ISO 293:2004 Plastics - Compression moulding of test specimens of thermoplastic materials
ISO 293:1986 Plastics; Compression moulding test specimens of thermoplastic materials
ISO 293:2023 Plastics — Compression moulding of test specimens of thermoplastic materials
ISO 293:1974 Plastics — Compression moulding test specimens of thermoplastic materials
ISO 800:1992 Plastics; phenolic moulding materials; specification
ISO 2112:1990 Plastics; aminoplastic moulding materials; specification
ISO 800:1977 Plastics — Phenolic moulding materials — Specification
ISO 4608:2023 Plastics
ISO 2561:2023 Plastics
ISO/CD TS 5733:2023 Plastics
ISO 1622:1975 Plastics — Polystyrene moulding and extrusion materials — Designation
ISO 8606:1990 Plastics; prepregs; bulk moulding compound (BMC) and dough moulding compound (DMC); basis for a specification
ISO/CD 8606:2023 Plastics — Prepregs — Bulk moulding compound (BMC) and dough moulding compound (DMC) — Requirements and specifications
ISO 1133:1981 Plastics — Determination of the melt flow rate of thermoplastics
ISO 306:1987 Plastics; Thermoplastic materials; Determination of Vicat softening temperature
ISO 306:1974 Plastics — Determination of the Vicat softening temperature of thermoplastics
ISO 9988-1:1991 Plastics; polyoxymethylene (POM) moulding and extrusion materials; part 1: designation
ISO 8328:1989 Plastics; amorphous thermoplastic moulding materials; determination of maximum reversion
ISO 3915:1981 Plastics; measurement of resistivity of conductive plastics
ISO 5412:2022 Plastics — Industrial compostable plastic shopping bags
ISO 3915:2022 Plastics — Measurement of resistivity of conductive plastics
ISO/DIS 3671 Plastics — Aminoplastic moulding materials — Determination of volatile matter
ISO 13968:2008 Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility
ISO 20819:2018 Plastics - Wood-plastic recycled composites (WPRC) - Specification
ISO 22196:2007 Plastics - Measurement of antibacterial activity on plastics surfaces
ISO 1184:1983 Plastics; Determination of tensile properties of films
ISO 171:1980 Plastics; Determination of bulk factor of moulding materials
ISO 489:1983 Plastics; Determination of the refractive index of transparent plastics
ISO 171:2022 Plastics — Determination of bulk factor of moulding materials
ISO 5424:2022 Plastics — Industrial compostable plastic drinking straws
ISO 294-4:2001 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage
ISO 28078-1:2009 Plastics - Poly(phenylene sulfide) (PPS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
ISO 20558-1:2018 Plastics - Poly(phenylene sulfide) (PPS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
ISO 16790:2005 Plastics - Determination of drawing characteristics of thermoplastics in the molten state
ISO 16790:2021 Plastics - Determination of drawing characteristics of thermoplastics in the molten state
ISO 4896:1979 Plastics — Melamine/phenolic moulding materials — Specification
ISO 3126:2005 Plastics piping systems - Plastics components - Determination of dimensions
ISO 295:2004 Plastics - Compression moulding of test specimens of thermosetting materials
ISO 11469:2000 Plastics - Generic identification and marking of plastics products
ISO 11469:2016 Plastics - Generic identification and marking of plastics products
ISO 11469:1993 Plastics; generic identification and marking of plastic products
ISO 2577:1984 Plastics; Thermosetting moulding materials; Determination of shrinkage
ISO 4896:1990 Plastics; melamine/phenolic moulding materials; specification
ISO 295:1974 Plastics; Compression moulding test specimens of thermosetting materials
ISO 295:1991 Plastics; compression moulding of test specimens of thermosetting materials
ISO 23949:2023 Plastics — Application of spread of flame test to plastic pipes

United States Navy, plastic.int

NAVY QPL-24519-31 NOTICE 1-2008 Molding Plastics, Electrical, Thermoplastic
NAVY QPL-24519-2010 MOLDING PLASTICS, ELECTRICAL, THERMOPLASTIC
NAVY QPL-24519-2013 MOLDING PLASTICS, ELECTRICAL, THERMOPLASTIC
NAVY QPL-24519-31-2005 MOLDING PLASTICS, ELECTRICAL, THERMOPLASTIC
NAVY QPL-24519-QPD-2010 Molding Plastics, Electrical, Thermoplastic
NAVY MIL-P-17303 D (2)-1991 PACKING MATERIALS, PLASTIC METALLIC AND PLASTIC NONMETALLIC
NAVY MIL-P-17303 D-1984 PACKING MATERIALS, PLASTIC METALLIC AND PLASTIC NONMETALLIC
NAVY MIL-P-8045 B (4)-1999 PLASTIC, SELF-SEALING AND NON-SELF-SEALING TANK BACKING MATERIAL
NAVY MIL-P-8045 B NOTICE 1-1999 PLASTIC, SELF-SEALING AND NON-SELF-SEALING TANK BACKING MATERIAL
NAVY MIL-P-8045 B-1964 PLASTIC, SELF-SEALING AND NON-SELF-SEALING TANK BACKING MATERIAL

TH-TISI, plastic.int

TIS 1705-1998 Plastics.aminoplastic moulding materials.specification
TIS 729-2010 Plastic sacks
TIS 1400-1997 Plastics rulers
TIS 1706-1998 Plastics.melamine/phenolic moulding materials.specification

AENOR, plastic.int

UNE-EN 15347:2008 Plastics - Recycled Plastics - Characterisation of plastics wastes
UNE-CEN/TR 15353:2008 IN Plastics - Recycled plastics - Guidelines for the development of standards for recycled plastics
UNE-CEN/TS 16011:2015 EX Plastics - Recycled plastics - Sample preparation
UNE 53036:2001 Plastics. Determination of specular gloss of plastic materials.
UNE-EN ISO 3994:2014 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification (ISO 3994:2014)
UNE 53206:2012 Plastics. Large plastic bags made with plastic films. Characteristics and test methods
UNE-CEN/TS 16010:2015 EX Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates
UNE 53316:2012 Plastics. Determination of chemical resistance of glass reinforced plastics.

Danish Standards Foundation, plastic.int

DS/EN 15347:2008 Plastics - Recycled Plastics - Characterisation of plastics wastes
DS/CEN/TR 15353:2007 Plastics - Recycled plastics - Guidelines for the development of standards for recycled plastics
DS/CEN/TS 16011:2013 Plastics - Recycled plastics - Sample preparation
DS/EN ISO 3994:2011 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification
DS/CEN/TS 16010:2013 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates
DS/CEN/TS 16010:2020 Plastics – Recycled plastics – Sampling procedures for testing plastics waste and recyclates
DS/EN ISO 3915:1999 Plastics - Measurement of resistivity of conductive plastics
DS/EN 1871:2020 Road marking materials – Paint, thermoplastic and cold plastic materials – Physical properties
DS/EN ISO 3671:1999 Plastics - Aminoplastic moulding materials - Determination of volatile matter
DS/ISO 1184:1985 Plastics. Determination of tensile properties of films
DS/ISO 17088:2021 Plastics – Organic recycling – Specifications for compostable plastics
DS/EN ISO 16136:2006 Industrial valves – Butterfly valves of thermoplastics materials
DS/EN ISO 16139:2006 Industrial valves – Gate valves of thermoplastics materials
DS/EN 13655:2003 Plastics - Mulching thermoplastic films for use in agriculture and horticulture
DS/EN ISO 14526-3:2000 Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 3: Requirements for selected moulding compounds
DS/EN ISO 15252-3:2000 Plastics - Epoxy powder moulding compounds (EP-PMCs) - Part 3: Requirements for selected moulding compounds
DS/EN ISO 11469:2000 Plastics - Generic identification and marking of plastics products
DS/EN ISO 293:2005 Plastics - Compression moulding of test specimens of thermoplastic materials
DS/EN ISO 16137:2006 Industrial valves – Check valves of thermoplastics materials
DS/EN ISO 21787:2006 Industrial valves – Globe valves of thermoplastics materials

Lithuanian Standards Office , plastic.int

LST EN 15347-2008 Plastics - Recycled Plastics - Characterisation of plastics wastes
LST EN ISO 3994:2011 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification (ISO 3994:2007)
LST EN 1871-2021 Road marking materials - Paint, thermoplastic and cold plastic materials - Physical properties
LST CEN/TS 16010-2021 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates
LST EN 13067-2020 Plastics welding personnel - Qualification of welders - Thermoplastics welded assemblies
LST EN 13655-2002 Plastics - Mulching thermoplastic films for use in agriculture and horticulture

German Institute for Standardization, plastic.int

DIN EN 15347:2008-02 Plastics - Recycled Plastics - Characterisation of plastics wastes; German version EN 15347:2007 / Note: To be replaced by DIN EN 15347 (2022-04).
DIN EN 15347:2008 Plastics - Recycled Plastics - Characterisation of plastics wastes; English version of DIN EN 15347:2008-02
DIN EN 15347:2022 Plastics - Recycled plastics - Characterisation of sorted plastics wastes; German and English version prEN 15347:2022
DIN EN 15347:2022-04 Plastics - Recycled plastics - Characterisation of sorted plastics wastes; German and English version prEN 15347:2022 / Note: Date of issue 2022-02-25*Intended as replacement for DIN EN 15347 (2008-02).
DIN 7708-1:1980 Plastic Moulding Materials; Plastic Products; Concepts
DIN 16780-1:1988 Plastic moulding materials; thermoplastic moulding materials of polymeric blends; classification and designation
DIN CEN/TS 16011:2013-04*DIN SPEC 91011:2013-04 Plastics - Recycled plastics - Sample preparation; German version CEN/TS 16011:2013
DIN-Fachbericht CEN/TR 15353:2007 Plastics - Recycled plastics - Guidelines for the development of standards relating for recycled plastics; German version CEN/TR 15353:2007
DIN EN 1871:2020-12 Road marking materials - Paint, thermoplastic and cold plastic materials - Physical properties; German version EN 1871:2020
DIN 35230:2016-09 Plastics - Welding of thermoplastics - Specification of welding procedures; German version CEN/TS 16892:2015
DIN CEN/TS 16010:2021-04 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates; German version CEN/TS 16010:2020
DIN 16726:1986 Plastic roofing felt and waterproofing sheet; testing
DIN EN ISO 3915:1999 Plastics - Measurement of resistivity of conductive plastics (ISO 3915:1981); German version EN ISO 3915:1999
DIN EN ISO 3915:2022-05 Plastics - Measurement of resistivity of conductive plastics (ISO 3915:2022); German version EN ISO 3915:2022
DIN 7742-1:1988 Plastic moulding materials; cellulose ester(CA, CP, CAB) thermoplastic moulding materials; classification and designation
DIN EN 17228:2019 Plastics - Bio-based polymers, plastics, and plastics products - Terminology, characteristics and communication
DIN EN 17228:2018 Plastics - Bio-based polymers, plastics, and plastic products - Terminology, characteristics and communication; German and English version prEN 17228:2018
DIN EN 17228:2019-06 Plastics - Bio-based polymers, plastics, and plastics products - Terminology, characteristics and communication; German version EN 17228:2019
DIN EN ISO 3671:1998-10 Plastics - Aminoplastic moulding materials - Determination of volatile matter (ISO 3671:1976); German version EN ISO 3671:1998 / Note: To be replaced by DIN EN ISO 3671 (2023-01).
DIN EN 13655:2003 Plastics - Mulching thermoplastic films for use in agriculture and horticulture; German version EN 13655:2002
DIN EN ISO 11469:2000 Plastics - Generic identification and marking of plastics products (ISO 11469:2000); German version EN ISO 11469:2000
DIN 5059-2:1990 Packaging; metal and plastic tubes; plastic tubes; tube nozzles
DIN ISO 171:2000 Plastics - Determination of bulk factor of moulding materials (ISO 171:1980)
DIN EN 15348:2008 Plastics - Recycled Plastics - Characterisation of poly(ethylene terephthalate) (PET) recyclates; English version of DIN EN 15348:2008-02
DIN EN ISO 15252-3:2000-08 Plastics - Epoxy powder moulding compounds (EP-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 15252-3:1999); German version EN ISO 15252-3:1999
DIN EN ISO 14526-3:2000-08 Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14526-3:1999); German version EN ISO 14526-3:1999
DIN EN 13067:2019 Plastics welding personnel - Qualification of welders - Thermoplastics welded assemblies; German and English version prEN 13067:2019
DIN EN 13067:2020-11 Plastics welding personnel - Qualification of welders - Thermoplastics welded assemblies; German version EN 13067:2020
DIN EN ISO 295:2004 Plastics - Compression moulding of test specimens of thermosetting materials (ISO 295:2004); German version EN ISO 295:2004

Association Francaise de Normalisation, plastic.int

NF EN 15347:2008 Plastiques - Plastiques recyclés - Caractérisation des déchets de plastiques
NF T50-806*NF EN 15347:2008 Plastics - Recycled Plastics - Characterisation of plastics wastes.
NF T58-003*NF EN ISO 293:2005 Plastics - Compression moulding of test specimens of thermoplastic materials
XP T50-810*XP CEN/TS 16011:2013 Plastics - Recycled plastics - Sample preparation
XP CEN/TS 16011:2013 Plastiques - Plastiques recyclés - Préparation des échantillons
NF T50-808*NF ISO 15270:2009 Plastics - Guidelines for the recovery and recycling of plastics waste.
NF T58-003:1994 Plastics. Compression moulding test specimens of thermoplastic materials.
NF T54-082:1988 Plastics. Thermoplastic and thermosetting valves. Test of resistance to pressure.
NF T51-080:1984 PLASTICS. DETERMINATION OF THE RESISTIVITY OF CONDUCTIVE PLASTICS.
NF T50-803:2008 Plastics - Recycled plastics - Characterisation of Polyethylene (PE) recyclates.
NF T50-803*NF EN 15344:2021 Plastics - Recycled plastics - Characterization of Polyethylene (PE) recyclates
NF T50-804*NF EN 15345:2008 Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates
XP CEN/TS 16010:2013 Plastiques - Plastiques recyclés - Procédures d'échantillonnage pour l'essai des déchets de plastiques et des recyclats
NF T54-002:1981 Plastics. Thermoplastics parts of piping. Definitions. Dimensions.
XP T50-809*XP CEN/TS 16010:2013 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates
NF EN ISO 14526-3:2000 Plastiques - Poudres à mouler phénoliques (PF-PMC) - Partie 3 : exigences relatives à certaines poudres à mouler
NF T54-202:2002 Silage thermoplastic films.
NF R80-501:1980 Flexible plastics and flexible cellular plastics. Staining capability.
NF T50-060:1994 PLASTIC. GENERIC IDENTIFICATION AND MARKING OF PLASTIC PRODUCTS.
NF T51-080*NF EN ISO 3915:2022 Plastics - Measurement of resistivity of conductive plastics
NF EN ISO 3915:2022 Plastiques - Mesurage de la résistivité des plastiques conducteurs
NF T54-190:2017 Plastics - Thermoplastic covering films for use in agriculture and horticulture
NF EN ISO 20753:2018 Plastiques - Éprouvettes
NF T51-799*NF EN 17228:2019 Plastics - Bio-based polymers, plastics, and plastic products - Terminology, characteristics and communication
NF EN 17228:2019 Plastiques - Polymères, plastiques et produits en plastique biosourcés - Terminologie, caractéristiques et communication
NF EN ISO 3126:2005 Systèmes de canalisations en plastiques - Composants en plastiques - Détermination des dimensions
NF T51-800:2015 Plastiques - Spécifications pour les plastiques aptes au compostage domestique
NF T53-035:1981 Plastics. Amorphous thermoplastic moulding materials. Determination of post-shrinkage of test specimens.
NF T51-566:2006 Plastics - Determination of drawing characteristics of thermoplastics in the molten state.
NF T54-422:2003 Plastics - Mulching thermoplastic films for use in agriculture and horticulture.
NF T54-022:1980 Plastics. Thermoplastic pipes and fittings. Determination of specific gravity.
NF EN ISO 15252-3:2000 Plastiques - Poudres à mouler à base d'époxydes (EP-PMC) - Partie 3 : exigences relatives à certaines poudres à mouler
NF EN ISO 14530-3:2000 Plastiques - Poudres à mouler à base de polyester non saturé (UP-PMC) - Partie 3 : exigences relatives à certaines poudres à mouler
NF T58-005*NF EN ISO 295:2004 Plastics - Compression moulding of test specimens of thermosetting materials
NF T54-088*NF EN ISO 3126:2005 Plastics piping systems - Plastics components - Measurement of dimensions
NF H35-212*NF EN 16063:2012 Packaging - Rigid plastic containers - Nomenclature of plastic finishes
NF T50-060*NF EN ISO 11469:2016 Plastics - Generic identification and marking of plastics products

CZ-CSN, plastic.int

CSN 64 2013-1981 Plastics. Aminoplastic mouldlng malerials
CSN 64 2011-1981 Plastics. Phenolic mouldtng materials
CSN 64 2176-1983 Phonolic moulding materials Moulding materiál 170
CSN 64 2126-1983 Pheaolio moulding materials Moulding materiál 126
CSN 64 0861-1979 Plastios. Determination of melt flow index of thermoplastics
CSN 64 0806-1981 Bulk Plastics factor of moulding aterials
CSN 64 2013 Z4-2000
CSN 64 2013 Z3-1999
CSN 64 0521-1984 Plastics. Determination of the Vicat oftening temperature of thermo- lastics
CSN 64 0752-1979 1'lustics. elormiuation ol iman- esoence resistance í plaslirs
CSN 64 3041-1981 Plastics Polyethylen plastics pipes and fittings
CSN ISO 9113:1993 Plastics. Polypropylene (PP) and propylene-copolymer thermoplastics. Determination of izotaciticity index
CSN 79 5910-1967 Plastics footwear
CSN 64 0528-1993 Plastics. Determination of coefficient of linear thermal expansion of plastics
CSN 64 0626-1989 Plastics. Determination of tensile trenght of thermoplastics pipes on n annular test piece
CSN 64 0612-1981 Plastics. Determination f the Charpy impact esistance of rigld lastics.
CSN ISO 293:1992 Plastics. Compresion moulding test specimens of thermoplastic materials

SE-SIS, plastic.int

SIS SS 24 10 13-1982 Plastics - Film and sheeting - Determination of thickness
SIS SS 24 10 16-1980 Plastics — Film and sheeting — Determination of free shrinkage
SIS SS 24 10 20-1984 Plastics - Film and sheeting - Determination of tensile properties
SIS SS 16 12 18-1980 Plastics — Determination of flexural properties of rigid plastics
SIS SS-ISO 489:1987 Plastics - Determination of the refrac- tive index of transparent plastics
SIS SS 16 42 01-1984 Plastics — Aminoplastic moulding materials — Determination of volatile matter
SIS SS 16 11 54-1980 Plastics — Injection moulding test specimens of thermoplastic materials
SIS SS 16 67 12-1979 Thermoset polyester sheet moulding compounds

European Committee for Standardization (CEN), plastic.int

EN 15347:2007 Plastics - Recycled Plastics - Characterisation of plastics wastes
PD CEN/TS 16010:2013 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates
PD CEN/TS 16011:2013 Plastics - Recycled plastics - Sample preparation
EN ISO 3994:2011 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification
EN ISO 306:2022 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2022)
EN ISO 306:1996 Plastics - Thermoplastic Materials - Determination of Vicat Softening Temperature (VST) ISO 306:1994
EN ISO 306:2013 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)
PD CEN/TS 16892:2015 Plastics - Welding of thermoplastics - Specification of welding procedures
CEN/TS 16892:2015 Plastics - Welding of thermoplastics - Specification of welding procedures
PD CEN/TS 16010:2020 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates
EN ISO 3915:2022 Plastics - Measurement of resistivity of conductive plastics (ISO 3915:2022)
EN ISO 3915:1999 Plastics - Measurement of Resistivity of Conductive Plastics
EN 15348:2007 Plastics - Recycled plastics - Characterization of poly(ethylene terephthalate) (PET) recyclates
EN ISO 294-2:2018 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:2018)
EN ISO 293:2023 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2023)
EN ISO 293:2003 Plastics - Compression moulding test specimens of thermoplastic materials ISO 293: 1986
EN ISO 295:1998 Plastics - Compression Moulding of Test Specimens of Thermosetting Materials ISO 295:1991
EN ISO 3126:2005 Plastics piping systems - Plastics components - Determination of dimensions ISO 3126:2005
EN ISO 16137:2006 Industrial valves - Check valves of thermoplastics materials ISO 16137:2006

British Standards Institution (BSI), plastic.int

BS EN 15347:2008 Plastics. Recycled Plastics. Characterization of plastics waste
BS EN 15347:2007 Plastics - Recycled Plastics - Characterization of plastics waste
BS EN ISO 293:2006 Plastics - Compression moulding of test specimens of thermoplastic materials
BS EN ISO 3671:1978 Plastics - Aminoplastic moulding materials - Determination of volatile matter
22/30448009 DC BS EN 15347. Plastics. Recycled plastics. Characterisation of sorted plastics wastes
BS 1322:1992 Specification for aminoplastic moulding materials
BS PD CEN/TS 16892:2015 Plastics. Welding of thermoplastics. Specification of welding procedures
BS EN ISO 3915:1999 Plastics - Measurement of resistivity of conductive plastics
BS EN ISO 7808:1993 Plastics. Thermosetting moulding materials. Determination of transfer flow
BS EN ISO 294-3:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Small plates
BS PD CEN/TS 16010:2020 Plastics. Recycled plastics. Sampling procedures for testing plastics waste and recyclates
BS EN 17228:2019 Plastics. Bio-based polymers, plastics, and plastics products. Terminology, characteristics and communication
BS EN ISO 3671:1999 Plastics. Aminoplastic moulding materials. Determination of volatile matter
BS EN ISO 3671:2023 Plastics. Aminoplastic moulding materials. Determination of volatile matter
BS EN 13655:2002 Plastics. Mulching thermoplastic films for use in agriculture and horticulture
BS EN 13677-1:2003 Reinforced thermoplastic moulding compounds - Specification for GMT - Designation
BS EN 13655:2018 Plastics. Mulching thermoplastic films for use in agriculture and horticulture
BS ISO 17088:2021 Plastics. Organic recycling. Specifications for compostable plastics
BS ISO 16790:2005 Plastics - Determination of drawing characteristics of thermoplastics in the molten state
BS EN ISO 3126:2006 Plastics piping systems - Plastics components - Determination of dimensions
BS EN ISO 295:2004 Plastics - Compression moulding of test specimens of thermosetting materials

U.S. Military Regulations and Norms, plastic.int

ARMY MIL-B-35023 H NOTICE 1-1997 BEVERAGE BASE, POWERED - (OPERATIONAL RATION COMPONENT) [Use In Lieu Of: ARMY MIL-B-0035023 D INT AMD 2]
ARMY A-A-59464 A-2002 COMMERCIAL ITEM DESCRIPTION PLASTIC PLASTISOL (FOR COATING METALLIC OBJECTS)
ARMY MIL-P-21922 B VALID NOTICE 1-1988 PLASTIC RODS AND TUBES, POLYETHYLENE
ARMY MIL-P-21922 B (1)-1974 PLASTIC RODS AND TUBES, POLYETHYLENE
ARMY MIL-P-21922 B-1973 PLASTIC RODS AND TUBES, POLYETHYLENE

CO-ICONTEC, plastic.int

CH-SNV, plastic.int

SEV 4008-1965 Textiles — Tests for colour fastness Section N02: Colour fastness to bleaching: Peroxide
SNV 24624-1938
VSM 14032.3-1944
SN 214 062/4-1988 Textiles — Tests for colour fastnessSection P01: Colour fastness to dry heat (excluding pressing)
SN ISO 105/X06:1984
SNV 93100-1966
SN 234 352-1978 Shell end mills with tenon drive
SNV 40807 a-1959
SNV 95825-1950
VSM 10856.2-1943
SNV 742 402.19-1970
VSM 12803-1926
VSM 15158-1971 Rectangular or square parallel keys and their corresponding keyways (Dimensions in millimetres)
SN ISO 105/Z01:1984 Textiles — Tests for colour fastnessSection X01: Colour fastness to carbonizing: Aluminium Chloride
SNV 742 401.6-1971
SN EN 13067-2021 Plastics welding personnel - Qualification of welders - Thermoplastics welded assemblies

HU-MSZT, plastic.int

Japanese Industrial Standards Committee (JISC), plastic.int

JIS K 7151 AMD 1:2009 Plastics -- Compression moulding test specimens of thermoplastic materials(Amendment 1)
JIS K 7145:2000 Plastics -- Aminoplastic moulding materials -- Determination of volatile matter
JIS A 5709:1979 Thermoplastic bathtubs
JIS K 7152-3:1999 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 3: Small plates
JIS K 7212:1999 Plastics -- Determination of thermal stability of thermoplastics -- Oven method
JIS S 6032:1993 Plastics rulers
JIS S 2032:1995 Plastics buckets
JIS S 6032:2004 Plastics rulers
JIS K 6999:1994 Plastics -- Generic identification and marking of plastic products
JIS K 6999:2004 Plastics -- Generic identification and marking of plastics products
JIS K 7152-2:1999 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 2: Small tensile bars
JIS K 6920-1:2000 Plastics -- Polyamide (PA) moulding and extrusion materials -- Part 1: Designation

RU-GOST R, plastic.int

GOST R 50491-1993 Plastics. Aminoplastic moulding materials. Determination of volatile matter
GOST 11645-1973 Plastics. Determination of flow index of thermoplastics melt by extrusion plastometer
GOST 15088-2014 Plastics. Method for determination of Vicat softening temperature of thermoplastics
GOST 11234-1991 Plastics. Determination of bulk factor of moulding materials
GOST 12020-2018 Plastics. Testing methods of plastics resistance to chemical substances
GOST 12015-1966 Plastics. Preparation of test specimens from thermosetts. General requirements
GOST 12019-1966 Plastics. Preparation of test speciments from thermoplastics. General conditions

CEN - European Committee for Standardization, plastic.int

PRCEN/TR 15353-2005 Plastics - Recycled plastics - Guidelines for the development of standards for recycled plastics
PREN 1871-2018 Road marking materials - Paint@ thermoplastic and cold plastic materials - Physical properties
EN ISO 1133:2005 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
EN ISO 1133:1999 Plastics - Determination of the Melt Mass-Flow Rate (MFR) and the Melt Volume-Flow Rate (MVR) of Thermoplastics
EN ISO 306:2004 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)
PREN 17228-2018 Plastics - Bio-based polymers@ plastics@ and plastic products - Terminology@ characteristics and communication
EN 17228:2019 Plastics - Bio-based polymers@ plastics@ and plastics products - Terminology@ characteristics and communication
EN ISO 20558-1:2019 Plastics - Poly(phenylene sulfide) (PPS) moulding and extrusion materials - Part 1: Designation system and basis for specifications

CU-NC, plastic.int

NC 30-52-1986 Plastics Plastic Shoes Quality Speoifications
NC 30-47-1986 Plastica. Industrial Plastic Helmets. Quality Specifications
NC 54-315-1985 Construction Materials and Products. Clay Materials Determination of Plasticity and Plastic Water

FI-SFS, plastic.int

SFS 3241-1979
SFS 4238 E-1979 In the event of any differences in interpretation of this standard the Finnish version shall take precedence over this translation.
SFS 3468 E-1983 In case of interpretation disputes the Finnish version applies. Date of translation 1986-08-18
SFS 3709-1976 MUOVITASKUT
SFS-ISO 171 E:1986 This standard is approved in English
SFS 4386-1979
SFS-ISO 2577 E:1986 This standard is approved in English
SFS-ISO 1184:1987 In case of interpretation disputes the English text applies

Professional Standard - Light Industry, plastic.int

QB/T 4880-2015 Injection moulding plastic chairs
QB/T 4336-2012 Injection plastic heels of footwear
QB/T 4152-2010 Plastic umbrella
QB/T 5785-2022 Plastic Dewatering Masterbatch

YU-JUS, plastic.int

JUS G.C1.420-1984 Plastics. Aminoplastic moulding materials. Classification and technical requirements
JUS G.S2.605-1980 Plastics Compression moulding test specimens of thermosetting materials
JUS G.C0.013-1991 Plastics - Symbols - Plasticizers
JUS G.S2.818-1990 Plastics. Cellular plastics, rigid. Determination of water absorption
JUS G.S2.641-1991 Pastics.Thermoplastic materials.Determination of Vicat softening temperature
JUS G.S2.762-1997 Plastics - Determination of coefficient of friction of plastic films

IX-SA, plastic.int

AS 203:1972

BE-NBN, plastic.int

NBN T 40-101-1988 Plastics - Determination of the melt flow rate of thermoplastics

PL-PKN, plastic.int

PN C89418-1990 Plastics Determination of volatile matter in thermoplastics
PN-EN 1871-2021-03 E Road marking materials -- Paint, thermoplastic and cold plastic materials -- Physical properties
PN C89011-1992 Plastics. Compression moulding test specimens of thermoplasticmaterials
PN C89048-1973 Plastics Determination of the refractive index of transparent plastics
PN C89012-1988 Plastics Recommended practice for injection moulding test specirnens of thermoplastic materials
PN O79804-1991 Plastics transport packages.Sacks of plastics film.Classification
PN-EN 13067-2021-02 E Platics welding personnel--Qualfication of welders--Thermoplastics welded assemblies
PN C89024-1993 Plastics. Thermoplastic materials. Determination of Vicat softening temperature

Professional Standard - Machinery, plastic.int

JB/T 5209-1991 plastic filler

机械电子工业部, plastic.int

JB 5209-1991 plastic filler

TR-TSE, plastic.int

TS 1850-1975 PLASTICS DETERMINATION OF FLAMMABILITY OF PLASTICS ?N THE FORM OF BARS
TS 3435-1979 PLASTICS - POLYSTYRENE MOULDING AND EXTRUSION MATERIALS - DESIGNATION
TS 1149-1978 PLASTICS - INJECTION MOULDING TEST SPECIMENS OF TERMOPLASTIC MATERIALS
TS 1800-1975 POLYETHYLENE THERMOPLASTIC MATERIALS — DESIGNATION —
TS 767-1969 PLASTICS DETERMINATION OF APPARENT DENSITY OF CELLULAR PLACTICS
TS 1825-1975 PLASTICS DETERMINATION OF THE VICAT SOFTENING TEMPERATURE OF THERMOPLASTICS
TS 985-1971 PLASTICS DETERMINATION OF FLEXURAL PROPERTIES OF RIGID PLASTICS
TS 859-1970 THERMOPLASTIC INSULATION TAPE
TS 1972-1975 PLASTICS RIGID CELLULAR PLASTICS-DETERMINATION OF TENSILE PROPERTIES
TS 1408-1978 PLASTICS - COMPRESSION MOULDING TEST SPECIMENS OF THERMOSETTING MATERIALS
TS 785-1969 PLASTICS DETERMINATION OF THE REFRACTIVE INDEX OF TRANSPARENT PLASTICS

AGMA - American Gear Manufacturers Association, plastic.int

P149.02-1981 Wear Behavior of Plastics on Plastics
920-A01-2001 Materials for Plastic Gears
920-B15-2015 Materials for Plastic Gears

Korean Agency for Technology and Standards (KATS), plastic.int

KS M ISO 800:2007 Plastics－Phenolic moulding materials－Specification
KS M ISO 800:2012 Plastics－Phenolic moulding materials－Specification
KS M ISO 8606:2006 Plastics－Prepregs－Bulk moulding compound(BMC) and dough moulding compound(DMC)－Basis for a specification
KS M ISO 8606-2006(2016) Plastics－Prepregs－Bulk moulding compound(BMC) and dough moulding compound(DMC)－Basis for a specification
KS M ISO 8606-2006(2021) Plastics－Prepregs－Bulk moulding compound(BMC) and dough moulding compound(DMC)－Basis for a specification
KS M ISO 1622-2:2008 Plastics－Polystyrene(PS) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 306:2012 Plastics-Thermoplastic materials-Determination of Vicat softening temperature(VST)
KS M ISO 306:2015 Plastics－Thermoplastic materials－Determination of Vicat softening temperature(VST)
KS M ISO 3915:2002 Plastics-Measurement of resistivity of conductive plastics
KS M 3843-2010(2020) Plastics－Recycled moulding materials－Polypropylene(PP)
KS M ISO 3915-2002(2017) Plastics－Measurement of resistivity of conductive plastics
KS M 3842-2010(2020) Plastics－Recycled moulding materials－Polyetylene(PE)
KS M 3846-2010(2020) Plastics－Recycled moulding materials－Polyamide(PA)
KS M ISO 3915-2002(2022) Plastics－Measurement of resistivity of conductive plastics
KS M 3071-2004(2019) Plastics􀫥Determination of thermal stability of thermoplastics􀫥Oven method
KS G 2013-2009 Plastic rulers
KS M 6680-2012 Poly Vinyl Chloride footwear
KS G 3220-2004 Plastics buckets
KS G 2013-1994 Plastic rulers
KS G 2013-1984 Plastic rulers
KS G 3220-1984 Plastics buckets
KS I 3267-2014 Recycled plastics abrasives
KS I 3267-2016 Recycled plastics abrasives
KS M 3844-2010(2020) Plastics－Recycled moulding materials－Polyvinyl chloride(PVC)
KS M ISO 14526-3-2006(2016) Plastics－Phenolic powder moulding compounds(PF－PMCs)－Part 3：Requirements for selected moulding compounds
KS M ISO 295:2010 Plastics-Compression moulding of test specimens of thermosetting materials
KS M ISO 11469:2008 Plastics－Generic identification and marking of plastics products
KS M ISO 295-2010(2020) Plastics－Compression moulding of test specimens of thermosetting materials
KS M ISO 11469:2018 Plastics — Generic identification and marking of plastics products

KR-KS, plastic.int

KS M ISO 800-2007 Plastics－Phenolic moulding materials－Specification
KS M ISO 11469-2018 Plastics — Generic identification and marking of plastics products

Hebei Provincial Standard of the People's Republic of China, plastic.int

DB/T1300 Y28 15-1988 plastic blister container

ES-UNE, plastic.int

UNE 53331:2021 Plastics. Unplasticized poly(vinyl chloride), oriented unplasticized poly(vinyl chloride) (PVC-O), polyethylene (PE) and polypropylene (PP) pipes. Criterion for the assessment of pipes for plastics piping systems with car without pressure under exte...
UNE-EN 1871:2021 Road marking materials - Paint, thermoplastic and cold plastic materials - Physical properties
UNE-CEN/TS 16010:2022 EX:2022 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates
UNE-EN ISO 3915:2022 Plastics - Measurement of resistivity of conductive plastics (ISO 3915:2022)
UNE-EN 17228:2020 Plastics - Bio-based polymers, plastics, and plastics products - Terminology, characteristics and communication
UNE-EN ISO 14526-3:2000 PLASTICS - PHENOLIC POWDER MOULDING COMPOUNDS (PF-PMCs) - PART 3: REQUIREMENTS FOR SELECTED MOULDING COMPOUNDS. (ISO 14526-3:1999)
UNE-EN 13067:2021 Plastics welding personnel - Qualification of welders - Thermoplastics welded assemblies

NL-NEN, plastic.int

NEN 3032-1966 Keuringseisen voor eet- en drinkgerei

Building Officials and Code Administrators International(U.S.), plastic.int

BOCA NBC COMM V2 CH 26-1999 Plastic
BOCA NBC COMM96 V2 CH 26-1996 Plastic
BOCA CHAPTER 26 NBC-1999 Plastic
BOCA CHAPTER 26 NBC-1996 Plastic
BOCA CHAPTER 26 NBC-1993 Plastic
BOCA CHAPTER 26 NBC COMM V2-1993 Plastic

American National Standards Institute （ANSI), plastic.int

ANSI/ASTM D2581:2001 Specification for Polybutylene (PB) Plastics Molding and Extrusion Materials (08.02, 08.04)
ANSI/ASTM D4101:2001 Propylene Plastic Injection and Extrusion Materials, Specification for (08.03)
ANSI/ASTM D2609:2002 Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe

Society of Automotive Engineers (SAE), plastic.int

SAE AMS3617D-1994 Nylon Plastic Moldings and Extrusions

GM Europe, plastic.int

GME STD 518522-1987 Plastic 8522 (EVA) Plast 8522 (EVA) English/Swedish
GME B 040 0316-2005 Plastic Bag
GME STD 518380-1979 Plastic 8380 Wood flour filler moulding compound Plast 8380 Tr鋗j鰈sfylld pressmassa English/Swedish

AT-ON, plastic.int

OENORM EN 1871-2020 Road marking materials - Paint, thermoplastic and cold plastic materials - Physical properties
ONR CEN/TS 16010-2021 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates
ONORM C 9515-1982 Testing of plastics; Determination of the Melt-Flow-Index of tbermoplastics
ONORM EN 743-1994 Plastics piping and ducting systems. Thermoplastics pipes. Determination of the longitudinal reversion

国家市场监督管理总局、中国国家标准化管理委员会, plastic.int

GB/T 17037.2-2020 Plastics—Injection moulding of test specimens of thermoplastic materials—Part 2:Small tensile bars
GB/T 37842-2019 Ball valves of thermoplastics materials
GB/T 38008-2019 Gate valves of thermoplastics materials
GB/T 40006.1-2021 Plastics—Recycled plastic—Part 1:General rules
GB/T 40006.3-2021 Plastics—Recycled Plastics—Part 3：Polypropylene(PP) materials
GB/T 40006.8-2021 Plastics—Recycled plastics—Part 8: Polyamide (PA) materials
GB/T 40006.2-2021 Plastics—Recycled Plastics—Part 2: Polyethylene（PE）materials
GB/T 40006.7-2021 Plastics—Recycled plastics—Part 7: Polycarbonate(PC) materials
GB/T 39385-2020 Plastics piping and ducting systems—Thermoplastics pipes—Determination of ring flexibility
GB/T 24128-2018 Plastics—Assessment of the effectiveness of fungistatic compounds in plastics formulations
GB/T 40553-2021 Plastics—Specifications for plastics suitable for home composting

RO-ASRO, plastic.int

STAS 9047-1971 PLASTICS Determination of the melt flow rate of thermoplastics
STAS 6572/1-1979 Plastics THERMOPLASTICS SPECIMENS MOULDING BY INJECTION General specifications
STAS 6572/2-1979 Plastics THERMOPLASTICS SPECIMENS MOULDING BY COMPRESSION General specifications
STAS 9595-1974 PLASTICS Determination of refractive index of transparent plastics
STAS SR ISO 3671:1993 Plastics. Aminoplastic moulding materials. Determination of volatile matter
STAS 6216-1980 PLASTIGS Determination of loss of plasticizers Activated carbon method
STAS 6127-1968
STAS SR ISO 3915:1981 Plastics. Measurement of resistivity of conductive plastics

Professional Standard - Chemical Industry, plastic.int

HG/T 3986-2016 Plastic tower packings
HG/T 5102~5104-2016 Plastic welding rod, plastic cold welding procedure qualification and plastic cold welding procedure specification (2016)

Aerospace Industries Association/ANSI Aerospace Standards, plastic.int

AIA/NAS NAS 281-1947 Tubing - Thermoplastic (Rev. 1)

Guangdong Provincial Standard of the People's Republic of China, plastic.int

DB44/T 927-2011 Thermoplastic Tableware

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, plastic.int

GB/T 1404.3-2008 Plastics - Phenolic powder moulding compounds - Part 3: Requirements for selectes moulding compounds

IT-UNI, plastic.int

UNI CEN/TS 16010-2021 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates
UNI 5638-1965
UNI 7092-1972
UNI EN 13067-2021 Plastics welding personnel - Qualification of welders - Thermoplastics welded assemblies

Professional Standard - Aerospace, plastic.int

QJ 868.3-1984 Plastic Extrusion Mold Rectangular Plastic Compression Mold
QJ 867.1-1984 Plastic Extrusion Mold Round Plastic Compression Mold
QJ 867.3-1984 Plastic Extrusion Mold Round Plastic Compression Mold
QJ 868.1-1984 Plastic Extrusion Mold Rectangular Plastic Compression Mold
QJ 867.2-1984 Plastic Extrusion Mold Round Plastic Compression Mold
QJ 868.2-1984 Plastic Extrusion Mold Rectangular Plastic Compression Mold
QJ 869.1-1984 Plastic Extrusion Die Round Plastic Extrusion Die
QJ 869.2-1984 Plastic Extrusion Die Round Plastic Extrusion Die
QJ 869.3-1984 Plastic Extrusion Die Round Plastic Extrusion Die
QJ 870.2-1984 Plastic Extrusion Die Rectangular Plastic Extrusion Die
QJ 870.3-1984 Plastic Extrusion Die Rectangular Plastic Extrusion Die
QJ 870.1-1984 Plastic Extrusion Die Rectangular Plastic Extrusion Die
QJ 1094.2-1986 Plastic and Metal Protectors Plastic Protector Plugs

VDI - Verein Deutscher Ingenieure, plastic.int

VDI 2006-1970 Gestalten von Spritzgussteilen aus thermoplastischen Kunststoffen

工业和信息化部/国家能源局, plastic.int

JB/T 6057-2017 Plastic molding steel technical conditions

Association of German Mechanical Engineers, plastic.int

DVS 2204-3-1981 Glueing of thermoplastics; polystyrene and allied plastics
DVS 2204-1-2010
DVS 2204-1-2011 Adhesive bonding of thermoplastics

Indonesia Standards, plastic.int

SNI 12-4260-1996 Plastic bowls
SNI 12-1297-1989 Plastic field bottles
SNI 7323-2008 Plastic - Tableware - Polystyrene foam

CL-INN, plastic.int

INDITECNOR 61-3Ech-1962

Military Standards (MIL-STD), plastic.int

DOD A-A-54429-1988 BAG, PLASTIC

Taiwan Provincial Standard of the People's Republic of China, plastic.int

CNS 9052-1982 Plastics Mat
CNS 9040-1982 Plastics Rulers
CNS 3478-1982 Plastic Shoes

Group Standards of the People's Republic of China, plastic.int

T/WCSLX 01-2019 plastic shoes
T/HSSX 0005-2022 plastic spoon
T/SGX 018-2023 Recycled Plastics—Thermoplastic cross-linked polyethylene from cable for wood-plastic composites
T/GDPIA 66-2023 Recycled Plastics—Thermoplastic cross-linked polyethylene from cable for wood-plastic composites

AR-IRAM, plastic.int

IRAM OFICIAL 12 523 N.I.O.-1958

American Gear Manufacturers Association, plastic.int

AGMA 920-B15-2015 Materials for Plastic Gears

未注明发布机构, plastic.int

DIN EN ISO 846:2019 Plastics – Determination of the effect of microorganisms on plastics
DIN EN ISO 294-3:1998 Plastics Injection molding of thermoplastic test specimens Part 3: Small plates

Professional Standard - Automobile, plastic.int

CAB 1025-2013 Plastic mat for automotive

National Sanitation Foundation (NSF), plastic.int

NSF 21-2015 Thermoplastic refuse containers

DE-VDA, plastic.int

VDA 230-206 Teil 3-2007 Analyses of the stick-slip performance of material parts - Specific section - Plastic web: Plastic web against plastic web

SAE - SAE International, plastic.int

SAE T-122-2009 Engineering Plastics and Plastic Composites In Automotive Applications

Professional Standard - Aviation, plastic.int

HB 7597-1998 General Specification for Thermoplastic Molded Parts

American Society for Testing and Materials (ASTM), plastic.int

ASTM F409-17 Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings

Defense Logistics Agency, plastic.int

DLA MS3339 REV B NOTICE 1-1998 PLATE, MOUNTING, PLASTIC FOR USE WITH MS3367 PLASTIC TIEDOWN STRAPS
DLA MS3339 REV B-1974 PLATE, MOUNTING, PLASTIC FOR USE WITH MS3367 PLASTIC TIEDOWN STRAPS

BR-ABNT, plastic.int

ZA-SANS, plastic.int

SANS 3126:2008 Plastics piping systems - Plastics components - Determination of dimensions