ZH
RU
ES
Comparative test samples
Comparative test samples, Total:500 items.
In the international standard classification, Comparative test samples involves: Testing of metals, Linear and angular measurements, Fertilizers, Services, Test conditions and procedures in general, Construction materials, Paints and varnishes, Sensory analysis, Quality, Road engineering, Soil quality. Pedology, Aircraft and space vehicles in general, Veterinary medicine, Leather technology, Tobacco, tobacco products and related equipment, Edible oils and fats. Oilseeds, Pipeline components and pipelines, Products of the textile industry, Particle size analysis. Sieving, Laboratory medicine, Solar energy engineering, Electrical and electronic testing, Environmental testing, Meat, meat products and other animal produce, General methods of tests and analysis for food products, Mechanical testing, Road vehicle systems, Measurement of volume, mass, density, viscosity, Aerospace fluid systems and components, Water quality, Paint ingredients, Earthworks. Excavations. Foundation construction. Underground works, Reinforced plastics, Products of the chemical industry, Crude petroleum, Rubber, Protection against fire, Refractories, Document imaging applications, Animal feeding stuffs, Footwear, Photography, Fuels, Tunnel construction, Tyres, Farming and forestry, Analytical chemistry, Glass, Rubber and plastics products, Textile fibres, Wastes, Inorganic chemicals, Microbiology, Iron and steel products, Non-metalliferous minerals, Ferroalloys, Thermodynamics and temperature measurements, Electrical wires and cables, Optoelectronics. Laser equipment, Aerospace electric equipment and systems, Inks. Printing inks, Wood, sawlogs and sawn timber, Adhesives, Petroleum products in general, Milk and milk products, Welding, brazing and soldering, Air quality, Food products in general, Prepackaged and prepared foods, Fluid power systems, Ventilators. Fans. Air-conditioners, Fruits. Vegetables, Textile auxiliary materials, Aids for disabled or handicapped persons, Surface treatment and coating, Structures of buildings, Spices and condiments. Food additives, Lifting equipment, Cutting tools, Plastics, Sterilization and disinfection, Optics and optical measurements, Waxes, bituminous materials and other petroleum products, Non-ferrous metals, Nuclear energy engineering.
IT-UNI, Comparative test samples
Korean Agency for Technology and Standards (KATS), Comparative test samples
YU-JUS, Comparative test samples
- JUS M.A1.043-1982 Roughness camparison specimens — Gast surfaces
- JUS M.A1.042-1980 Rougtiness comparisan specimens, spark-eroded, shot blasted and grit blasted, and polished
German Institute for Standardization, Comparative test samples
- DIN 55981:1979 Determination of relative hue of near white specimens
- DIN 10954:1997 Sensory testing methods - Paired comparison test
- DIN EN ISO 5495:2007 Sensory analysis - Methodology - Paired comparison test (ISO 5495:2005 and ISO 5495:2005/Cor 1:2006) English version of DIN EN ISO 5495:2007-10
- DIN-Fachbericht CEN/TR 15298:2006 Foodstuffs - Sample comminution for mycotoxings analysis - Comparison between dry milling and slurry mixing; German version CEN/TR 15298:2006
- DIN 53399-2:1982 Testing of reinforced plastics; shear test on plane specimens
- DIN EN ISO 18314-4:2021-09 Analytical colorimetry - Part 4: Metamerism index for pairs of samples for change of illuminant (ISO 18314-4:2020); German version EN ISO 18314-4:2021 / Note: To be replaced by DIN EN ISO 18314-4 (2023-02).
- DIN 19051-4:1991 Test charts for micrography; DIN-test chart B for optical density and for determination of scale of reproduction
- DIN EN ISO 18314-4:2023-02 Analytical colorimetry - Part 4: Metamerism index for pairs of samples for change of illuminant (ISO/DIS 18314-4:2022); German and English version prEN ISO 18314-4:2023 / Note: Date of issue 2023-01-06*Intended as replacement for DIN EN ISO 18314-4 (20...
- DIN EN ISO 5089:2016-09 Textiles - Preparation of laboratory test samples and test specimens for chemical testing (ISO 5089:1977); German version EN ISO 5089:2016
- DIN EN ISO 664:2008-11 Oilseeds - Reduction of laboratory sample to test sample (ISO 664:2008); German version EN ISO 664:2008
- DIN 53859-5:1992 Testing of textiles; tear growth test on textile fabrics; trapezoid test
- DIN EN ISO 664:2008 Oilseeds - Reduction of laboratory sample to test sample (ISO 664:2008); English version of DIN EN ISO 664:2008-11
- DIN EN 1434-4:2007 Heat meters - Part 4: Pattern approval tests
English version of DIN EN 1434-4:2007-05
- DIN EN 14845-1:2007 Test methods for fibres in concrete -
Part 1: Reference concretes
English version of DIN EN 14845-1:2007-09
- DIN 53281:2006 Testing of adhesively bonded joints - Preparation of test specimens
- DIN EN ISO 11643:2009-10 Leather - Tests for colour fastness - Colour fastness of small samples to solvents (ISO 11643:2009); German version EN ISO 11643:2009
- DIN EN 12814-7:2003 Testing of welded joints of thermoplastics semi-finished products - Part 7: Tensile test with waisted test specimens; German version EN 12814-7:2002
- DIN EN 13892-1:2003 Methods of test for screed materials - Part 1: Sampling, making and curing specimens for test; German version EN 13892-1:2002
- DIN EN ISO 5089:2016 Textiles - Preparation of laboratory test samples and test specimens for chemical testing (ISO 5089:1977)
- DIN EN 15002:2006 Characterization of waste - Preparation of test portions from the laboratory sample English version of DIN EN 15002:2006-05
- DIN 53852:1991 Testing of textiles; determination of yarn length ratios in woven and knitted fabrics
- DIN EN 15413:2011 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample; German version EN 15413:2011
- DIN 51554-1:1978 Testing of mineral oils; Test of susceptibility to ageing according to Baader; Purpose, sampling, ageing
- DIN-Fachbericht 143:2005 Modern rheological test methods - Part 1: Determination of the yield point - Fundamentals and comparative testing methods
British Standards Institution (BSI), Comparative test samples
- BS 2634-1:1987 Roughness comparison specimens. Specification for turned, ground, bored, milled, shaped and planed specimens
- BS 2634-1:2010 Roughness comparison specimens.
Part 1: Specification for turned, ground,
bored, milled, shaped and planed specimens
- BS 1881-130:1996 Testing concrete - Method for temperature-matched curing of concrete specimens
- BS PD ISO/IEC GUIDE 46:2017 Comparative testing of consumer products and related services. General principles
- BS PD CLC/TR 50619:2014 Guidance on how to conduct Round Robin Tests
- BS EN ISO 10399:2004 Sensory analysis. Methodology. Duo-trio test
- BS EN ISO 10399:2010 Sensory analysis - Methodology - Duo-trio test
- BS EN ISO 18314-4:2021 Analytical colorimetry. Metamerism index for pairs of samples for change of illuminant
- BS EN ISO 5089:2016 Textiles. Preparation of laboratory test samples and test specimens for chemical testing
- BS EN ISO 5495:2006 Sensory analysis. Methodology. Paired comparison test
- BS 1881-130:2013 Testing concrete.Part 130:Method for temperature-matched curing of concrete specimens
- BS 4401-12:1979 Methods of test for meat and meat products - Determination of starch content of meat products (reference method)
- BS PD CEN/TR 15298:2006 Foodstuffs — Sample comminution for mycotoxins analysis — Comparison between dry milling and slurry mixing
- BS EN ISO 11643:2009 Leather - Tests for colour fastness - Colour fastness of small samples to solvents(ISO 1643:2009)
- BS ISO 5658-4:2001 Reaction to fire tests - Spread of flame - Intermediate-scale test of vertical spread of flame with vertically oriented specimen
- BS 2634-2:1987 Roughness comparison specimens. Specification for spark-eroded, shot-blasted, grit-blasted, and polished specimens
- BS 2634-2:2010 Roughness comparison
specimens.
Part 2: Specification for spark-eroded,
shot?blasted, grit-blasted and polished
specimens
- BS EN 13892-1:2002 Methods of test for screed materials - Sampling, making and curing specimens for test
- BS EN 15413:2011 Solid recovered fuels. Methods for the preparation of the test sample from the laboratory sample
- BS 3483-A1:1983 Methods for testing pigments for paints - Comparison of colour
- BS EN 3475-705:2005 Cables, electrical, aircraft use - Test methods - Part 705: Contrast measurement
- BS EN 3475-705:2006 Aerospace series. Cable, electrical, aircraft use. Test methods. Contrast measurement
- BS 4401-13:1979 Methods of test for meat and meat products - Determination of glucono-delta-lactone content (reference method)
- BS 6920-2.1:2000+A3:2008 Suitability of
non-metallic products
for use in contact with
water intended for
human consumption
with regard to their
effect on the quality of
the water —
Part 2: Methods of test —
Section 2.1: Samples for testing
- BS 6920-2.1:2014 Suitability of non-metallic materials and products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. Methods of test. Samples for testing
- BS EN 12814-7:2002 Testing of welded joints of thermoplastics semi-finished products - Tensile test with waisted test specimens
- BS EN 13205-4:2014 Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations. Laboratory performance test based on comparison of concentrations
- DD CEN/TS 15413:2006 Solid recovered fuels — Methods for the preparation of the test sample from the laboratory sample
- BS DD CEN/TS 15413:2006 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample
- DD ENV 1402-2-1997 Unshaped refractory products. Sampling for testing
- 19/30354953 DC BS ISO 18314-4. Analytical colorimetry. Part 4. Metamerism index for pairs of samples at change of illuminant
- BS EN ISO 13437:1998 Geotextiles and geotextile-related products - Method for installing and extracting samples in soil, and testing specimens in laboratory
- BS ISO 10328-2:1997 Prosthetics.Structural testing of lower-limb prostheses - Test samples
- BS EN ISO 1513:1995 Paints and varnishes - Examination and preparation of samples for testing
- BS EN ISO 1513:2010 Paints and varnishes - Examination and preparation of test samples
- BS DD CEN ISO/TS 22117:2010 Microbiology of food and animal feeding stuffs. Specific requirements and guidance for proficiency testing by interlaboratory comparison
- BS EN ISO 16000-11:2006 Indoor air - Determination of the emission of volatile organic compounds from building products and furnishing - Sampling, storage of samples and preparation of test specimens
- 23/30456807 DC BS EN ISO 18314-4. Analytical colorimetry - Part 4. Metamerism index for pairs of samples for change of illuminant
- BS 4585-8:1977 Methods of test for spices and condiments - Determination of degree of fineness of grinding - hand sieving method (reference method)
- BS PD ISO/TR 21704:2017 Toughness of round steel link chains. Test with sub-size specimens
- BS 373:1957 Methods of testing small clear specimens of timber
- BS 3483-C7:1980 Methods for testing pigments for paints - Comparison of resistance to bleeding
- BS 3482-1:1991 Methods of test for desiccants - Sampling, and preparation and storage of test samples
- BS EN 12390-2:2000 Testing hardened concrete - Making and curing specimens for strength tests
Association Francaise de Normalisation, Comparative test samples
- NF X06-065:1971 APPLICATIONS OF STATISTICS. INTRODUCTION TO THE USE OF STATISTICAL TESTS. COMPARISON OF TWO SAMPLES.
- NF EN ISO 11643:2009 Cuir - Essais de solidité des teintures - Solidité des teintures de petits échantillons aux solvants
- NF V09-020:2010 Sensory analysis - Methodology - Duo-trio test.
- NF V03-902:1995 Oilseeds. Reduction of laboratory sample to test sample.
- NF S99-512:2008 Biological evaluation of medical devices - Part 12 : sample preparation and reference materials.
- NF V09-012*NF EN ISO 5495:2007 Sensory analysis - Methodology - Paired comparison test
- NF V09-012:1983 Sensory analysis. Methodology. Paired comparison test.
- NF V09-012/A1*NF EN ISO 5495/A1:2016 Sensory analysis - Methodology - Paired comparison test
- NF EN ISO 664:2008 Graines oléagineuses - Réduction de l'échantillon pour laboratoire en échantillon pour essai
- NF EN ISO 18314-4:2021 Analyse colorimétrique - Partie 4 : indice de metamérisme de paires d'échantillon pour changement d'illuminant
- NF G06-001*NF EN ISO 5089:2016 Textiles - Preparation of laboratory test samples and test specimens for chemical testing
- NF V03-902*NF EN ISO 664:2008 Oilseeds - Reduction of laboratory sample to test sample
- NF V18-091:1982 Animal feeding stuffs. Preparation of test samples.
- NF EN ISO 4884:2019 Métaux-durs - Échantillonnage et essais des poudres au moyen d'éprouvettes frittées
- NF G52-221:2008 Leather - Chemical tests - Preparation of chemical test samples.
- NF X06-027:1987 Inspection by measurement of the proportion of non conforming items. Guidance on the design of a sampling programme.
- NF EN ISO 14556:2023 Matériaux métalliques - Essai de flexion par choc sur éprouvette Charpy à entaille en V - Méthode d'essai instrumenté
- NF V37-023:1983
- NF V09-020:1992 Sensory analysis. Methodology. Duo-trio test.
- NF X30-455:2006 Characterization of waste - Preparation of test portions from the laboratory sample.
- NF G52-221*NF EN ISO 4044:2017 Leather - Chemical tests - Preparation of chemical test samples
- NF P85-701:2003 Jointing products - Identification tests - Thermal gravimetric analysis.
- NF A03-112:1997 Steel and steel products. Location and preparation of samples and test pieces for mechanical testing.
- NF A01-010:1971 Aluminium and aluminium alloys. Copper and copper alloys. Samples, specimens and test pieces.
- NF EN ISO 5089:2016 Textiles - Préparation des échantillons réduits de laboratoire et des éprouvettes en vue des essais chimiques
- NF T75-110*NF ISO 356:1997 Essential oil. Preparation of test samples.
- NF V04-392:1995 BUTTER. DETERMINATION OF WATER, SOLIDS-NOT-FAT AND FAT CONTENTS ON THE SAME TEST PORTION (REFERENCE METHOD). (EUROPEAN STANDARD EN ISO 3727).
- NF EN 12697-12:2018 Mélanges bitumineux - Méthodes d'essai - Partie 12 : détermination de la sensibilité à l'eau des éprouvettes bitumineuses
- NF T75-620:2020 Cosmetics - Sun protection test methods - Percentage of water resistance
- NF T75-620*NF EN ISO 18861:2021 Cosmetics - Sun protection test methods - Percentage of water resistance
- NF P14-204-1*NF EN 13892-1:2003 Methods of test for screed materials - Part 1 : sampling, making and curing specimens for test.
- NF G07-158:1986 Textiles. Feather and fly items. Making of test pieces.
- NF P92-520:2013 Reaction to fire tests for products - Non-combustibility test
- NF P98-280:1992 Tests relating to pavements. Waterproofing materials for structures. Samples conditioning.
- NF V03-926*NF ISO 5502:1993 Oilseed residues. Preparation of test samples.
- NF A03-011-3*NF EN ISO 148-3:2017 Metallic materials - Charpy pendulum impact test - Part 3 : preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
- NF X43-283-4*NF EN 13205-4:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4 : laboratory performance test based on comparison of concentrations
- NF M60-411:1998 Verification of samples of uranyl or plutonium nitrate solutions by density measurements.
American Society for Testing and Materials (ASTM), Comparative test samples
- ASTM D4427-23 Standard Classification of Peat Samples by Laboratory Testing
- ASTM E2248-18 Standard Test Method for Impact Testing of Miniaturized Charpy V-notch Specimens
- ASTM D4427-07 Standard Classification of Peat Samples by Laboratory Testing
- ASTM F2231-02(2019) Standard Test Method for Charpy Impact Test on Thin Specimens of Polyethylene Used in Pressurized Pipes
- ASTM D4427-92(2002)e1 Standard Classification of Peat Samples by Laboratory Testing
- ASTM D4427-13 Standard Classification of Peat Samples by Laboratory Testing
- ASTM E903-96 Standard Test Method for Solar Absorptance, Reflectance, and Transmittance of Materials Using Integrating Spheres
- ASTM E1012-12 Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application
- ASTM E1012-12e1 Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application
- ASTM E1012-14 Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application
- ASTM D1217-12 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
- ASTM D1586-99 Standard Test Method for Penetration Test and Split-Barrel Sampling of Soils
- ASTM D1298-99e1 Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
- ASTM E2248-09 Standard Test Method for Impact Testing of Miniaturized Charpy V-Notch Specimens
- ASTM D1217-93(2007) Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
- ASTM E2330-12 Standard Test Method for Determination of Concentrations of Elements in Glass Samples Using Inductively Coupled Plasma Mass Spectrometry (ICP-MS) for Forensic Comparisons
- ASTM E2489-11 Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs
- ASTM D5083-10 Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens
- ASTM D1217-93(2003)e1 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
- ASTM D6110-04e1 Standard Test Methods for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
- ASTM D1298-12b(2017)e1 Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
- ASTM F1763-96 Standard Test Methods for Measuring Contrast of a Linear Polarizer
- ASTM D1586-11 Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils
- ASTM D6822-12b(2017)e1 Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
- ASTM E1422-05 Standard Guide for Test Methods for Forensic Writing Ink Comparison
- ASTM D143-09 Standard Test Methods for Small Clear Specimens of Timber
- ASTM D6822-12b Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
- ASTM C562-91(2000) Standard Test Method for Moisture in a Graphite Sample
- ASTM C604-02(2012) Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
- ASTM D1298-12b(2017) Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
- ASTM E1301-95e1 Standard Guide for Proficiency Testing by Interlaboratory Comparisons
- ASTM F1833-97 Standard Test Method for Comparison of Rearfoot Motion Control Properties of Running Shoes
- ASTM E1301-95(2003) Standard Guide for Proficiency Testing by Interlaboratory Comparisons
- ASTM F1833-97(2006) Standard Test Method for Comparison of Rearfoot Motion Control Properties of Running Shoes
- ASTM F1833-97(2011) Standard Test Method for Comparison of Rearfoot Motion Control Properties of Running Shoes
- ASTM C128-22 Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate
- ASTM C127-15 Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate
- ASTM C128-15 Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate
- ASTM D1217-15 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
- ASTM D1188-07e1 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Samples
- ASTM D1188/D1188M-22 Standard Test Method for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Coated Samples
- ASTM A944-22 Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
- ASTM D287-22 Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer/Method)
- ASTM D1485-86(1997)e1 Standard Test Methods for Rubber from Natural Sources-Sampling and Sample Preparation
- ASTM D1480-02e1 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
- ASTM D1480-02 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
- ASTM D1480-07 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
- ASTM C1140-03a Standard Practice for Preparing and Testing Specimens from Shotcrete Test Panels
- ASTM C1140-98 Standard Practice for Preparing and Testing Specimens from Shotcrete Test Panels
- ASTM D1188-96e1 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Paraffin-Coated Specimens
- ASTM D1188-96(2002) Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Paraffin-Coated Specimens
- ASTM D1188-96(2002)e1 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Paraffin-Coated Specimens
- ASTM D5860-95(2007) Standard Test Method for Evaluation of the Effect of Water Repellent Treatments on Freeze-Thaw Resistance of Hydraulic Cement Mortar Specimens
- ASTM D5860-95 Standard Test Method for Evaluation of the Effect of Water Repellent Treatments on Freeze-Thaw Resistance of Hydraulic Cement Mortar Specimens
- ASTM D5860-95(2002) Standard Test Method for Evaluation of the Effect of Water Repellent Treatments on Freeze-Thaw Resistance of Hydraulic Cement Mortar Specimens
- ASTM D156-07 Standard Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method)
- ASTM D287-92(2006) Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method)
- ASTM D156-07a Standard Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method)
- ASTM A944-05 Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
- ASTM A944-99 Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
- ASTM A944-99(2004) Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
- ASTM A944-10 Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
- ASTM D1480-15 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
- ASTM D7196-23 Standard Test Method for Raveling Test of Cold-Mixed Emulsified Asphalt Samples
- ASTM D1708-02 Standard Test Method for Tensile Properties of Plastics By Use of Microtensile Specimens
- ASTM D7229-06 Standard Test Method for Preparation and Determination of the Bulk Specific Gravity of Dense-Graded Cold Mix Asphalt (CMA) Specimens by Means of the Superpave Gyratory Compactor
- ASTM D7229-08 Standard Test Method for Preparation and Determination of the Bulk Specific Gravity of Dense-Graded Cold Mix Asphalt (CMA) Specimens by Means of the Superpave Gyratory Compactor
- ASTM D2745-00(2008) Standard Test Method for Relative Tinting Strength of White Pigments by Reflectance Measurements
- ASTM D2320-98(2008) Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)
- ASTM D2320-98(2012) Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)
- ASTM D2320-98(2022)e1 Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)
- ASTM E82-91(2001) Standard Test Method for Determining the Orientation of a Metal Crystal
- ASTM E829-94 Standard Practice for Preparing Refuse-Derived Fuel (RDF) Laboratory Samples for Analysis
- ASTM D156-12 Standard Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method)
- ASTM D156-15 Standard Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method)
- ASTM D6532-00 Standard Test Method for Evaluation of the Effect of Clear Water Repellent Treatments on Water Absorption of Hydraulic Cement Mortar Specimens
- ASTM E1271-94 Standard Practice for Qualifying Charpy Verification Specimens of Heat-Treated Steel (Withdrawn 2003)
- ASTM D7196-12 Standard Test Method for Raveling Test of Cold Mixed Emulsified Asphalt Samples
- ASTM D7196-16 Standard Test Method for Raveling Test of Cold Mixed Emulsified Asphalt Samples
- ASTM D7196-18 Standard Test Method for Raveling Test of Cold-Mixed Emulsified Asphalt Samples
- ASTM D8429-21 Standard Test Method for Legionella pneumophila in Water Samples Using Legiolert
- ASTM D4427-92(2007) Standard Classification of Peat Samples by Laboratory Testing
- ASTM D143-94(2007) Standard Test Methods for Small Clear Specimens of Timber
RO-ASRO, Comparative test samples
Taiwan Provincial Standard of the People's Republic of China, Comparative test samples
- CNS 15200-1-8-2007 Testing methods for paints - Part 1-8 : General rule - Reference sample
- CNS 12382-2006 Method of test for the California Bearing Ratio (CBR)
- CNS 12382-1988 Method of Test for California Bearing Ratio of Compacted Soil
- CNS 15009-2006 Proficiency testing by interlaboratory comparisons
- CNS 10989-1984 Methods for Reducing Field Samples of Aggregate to Testing Size
- CNS 14745-2003 Method of test for sulfur in petroleum products by hydrogenolysis and rateometric colorimetry
- CNS 14917-2005 Method of preparing and testing specimens from shotcrete test panels
Society of Automotive Engineers (SAE), Comparative test samples
- SAE AIR5666-2012 Icing Wind Tunnel Interfacility Comparison Tests
- SAE ARP1974-1986 Clamps, Support, Comparative Fatigue Strengths, Test Method
- SAE J2718-2006 Test for Tire Quasi-Static Longitudinal Force vs. Longitudinal Displacement and Quasi-Static Lateral Force vs. Lateral Displacement
- SAE J2718-2010 Test for Tire Quasi-Static Longitudinal Force vs. Longitudinal Displacement and Quasi-Static Lateral Froce vs. Lateral Displacement
SAE - SAE International, Comparative test samples
- SAE AIR5666A-2018 Icing Wind Tunnel Interfacility Comparison Tests
- SAE J2718-2017 Test for Tire Quasi-Static Longitudinal Force versus Longitudinal Displacement and Quasi-Static Lateral Force versus Lateral Force
- SAE J2718-2018 Test for Tire Quasi-Static Longitudinal Force vs. Longitudinal Displacement and Quasi-Static Lateral Force vs. Lateral Displacement
Shandong Provincial Standard of the People's Republic of China, Comparative test samples
- DB37/T 4003-2020 Neutralization test and ELISA test comparison laboratory evaluation standard
International Organization for Standardization (ISO), Comparative test samples
- ISO 11643:2009 Leather - Tests for colour fastness - Colour fastness of small samples to solvents
- ISO 5089:1977 Textiles; Preparation of laboratory test samples and test specimens for chemical testing
- ISO 5495:2005 Sensory analysis - Methodology - Paired comparison test
- ISO 5495:1983 Sensory analysis; Methodology; Paired comparison test
- ISO 10399:2004 Sensory analysis - Methodology - Duo-trio test
- ISO 10399:2017 Sensory analysis - Methodology - Duo-trio test
- ISO 10399:1991 Sensory analysis; methodology; duo-trio test
- ISO 18314-4:2020 Analytical colorimetry — Part 4: Metamerism index for pairs of samples for change of illuminant
- ISO 148-3:1998 Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V reference test pieces for verification of test machines
- ISO 664:2008 Oilseeds - Reduction of laboratory sample to test sample
- ISO/FDIS 18314-4:2023 Analytical colorimetry — Part 4: Metamerism index for pairs of samples for change of illuminant
- ISO 18314-4:2023 Analytical colorimetry — Part 4: Metamerism index for pairs of samples for change of illuminant
- ISO 9705:1993 Fire tests; full-scale room test for surface products
- ISO 5495:2005/Amd 1:2016 Sensory analysis — Methodology — Paired comparison test — Amendment 1
- ISO 5658-4:2001 Reaction to fire tests - Spread of flame - Part 4: Intermediate-scale test of vertical spread of flame with vertically oriented specimen
- ISO 4044:2008 | IULTCS/IUC 3 Leather — Chemical tests — Preparation of chemical test samples
- ISO 4044:2017 | IULTCS/IUC 3 Leather — Chemical tests — Preparation of chemical test samples
- ISO 377-1:1989 Selection and preparation of samples and test pieces of wrought steels; part 1: samples and test pieces for mechanical test
- ISO 7347:1987 Ferroalloys; Experimental methods for checking the bias of sampling and sample preparation
- ISO 5022:1979 Shaped refractory products; Sampling and acceptance testing
- ISO 5495:2005/Cor 1:2006 Sensory analysis - Methodology - Paired comparison test; Technical Corrigendum 1
- ISO 5502:1983 Oilseed residues — Preparation of test samples
- ISO 6498:1983 Animal feeding stuffs; Preparation of test samples
- ISO 4044:1977 Leather; Preparation of chemical test samples
- ISO 3727:1977 Butter; Determination of water, solids-not-fat and fat contents on the same test portion (Reference method)
- ISO/IEC Guide 43-2:1997 Proficiency testing by interlaboratory comparisons - Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies
- ISO 4661-1:1986 Rubber, vulcanized — Preparation of samples and test pieces — Part 1: Physical tests
- ISO 3785:2006 Metallic materials - Designation of test specimen axes in relation to product texture
- ISO 10321:1992 Geotextiles; tensile test for joints/seams by wide-width method
- ISO 1182:2010 Reaction to fire tests for products - Non-combustibility test
- ISO 1513:1973 Title missing - Legacy paper document
- ISO 1513:1992 Paints and varnishes; examination and preparation of samples for testing
- ISO/TS 22117:2010 Microbiology of food and animal feeding stuffs - Specific requirements and guidance for proficiency testing by interlaboratory comparison
- ISO 10328-2:1996 Prosthetics - Structural testing of lower-limb prostheses - Part 2: Test samples
- ISO/TR 21704:2017 Toughness of round steel link chains - Test with sub-size specimens
- ISO 16012:2015 Plastics - Determination of linear dimensions of test specimens
- ISO 16012:2004 Plastics - Determination of linear dimensions of test specimens
- ISO 2418:1972 Leather; Laboratory samples; Location and identification
- ISO 2418:2017 Leather - Chemical, physical and mechanical and fastness tests - Sampling location
- ISO/IEC Guide 43-1:1997 Proficiency testing by interlaboratory comparisons - Part 1: Development and operation of proficiency testing schemes
- ISO 1957:1986 Machine-made textile floor coverings; Sampling and cutting specimens for physical tests
- ISO 1920-3:2004 Testing of concrete - Part 3: Making and curing test specimens
- ISO 7373:1987 Ferroalloys; Experimental methods for checking the precision of sample division
- ISO 2142:1981 Wrought aluminium, magnesium and their alloys; selection of specimens and test pieces for mechanical testing
- ISO 3100-2:1988 Meat and meat products — Sampling and preparation of test samples — Part 2: Preparation of test samples for microbiological examination
- ISO 9705:1993/Cor 1:1993 Fire tests; full-scale room test for surface products; technical corrigendum 1
- ISO 13437:1998 Geotextiles and geotextile-related products - Method for installing and extracting samples in soil, and testing specimens in laboratory
Professional Standard - Ferrous Metallurgy, Comparative test samples
- YB/T 145-1998 Steel tubes.Measurement method of standard artificial defect for flaw detection
- YB/T 145-2013 Die casting and size measurement method of artificial defects on the reference sample pipes
- YB/T 173-2000 Testing method for cold specific resistivity of carbon-containing refractory products
国家市场监督管理总局、中国国家标准化管理委员会, Comparative test samples
- GB/T 38980-2020 Test method for artificial defect sizes of zirconium tube flaw detection comparison samples
- GB/T 40551-2021 Comparative testing of consumer products and related services-General principles
- GB/T 17783-2019 Rubber,vulcanized or thermoplastic—Chemical tests—Preparation of samples and test piece
AT-ON, Comparative test samples
- ONORM S 4051-1985 Guideline for conducting on slope Performance test for alpine skis; comparative test of consumer products
- ONORM M 7835 Teil.1-1983 Welding; destructive tests of welded joints; tensile fest on butt welded test samples
- ONORM M 7835 Teil.2-1983 Welding; destructive tests of welded joints; bending test on butt welded test samples
- ONORM EN 21513-1992 Paints and varnishes — Examination and preparation of samples for testing
Professional Standard - Tobacco, Comparative test samples
- YC/T 372-2010 Code of practice for the field test and demonstration of pesticides on tobacco
RU-GOST R, Comparative test samples
- GOST ISO 10399-2015 Organoleptic analysis. Methodology. Duo-trio test
- GOST 7564-1997 Rolled products. General rules of sampling, rough specimens and test pieces selection for mechanical and technological testing
- GOST 7564-1973 Steel. General rules of samples, blanks and test pieces for mechanical and technological tests
- GOST 8756.0-1970 Canned food products. Sampling and preparation of samples for test
- GOST ISO 356-2014 Essential oils. Preparation of test samples
- GOST R ISO 5089-1999 Textiles. Preparation of laboratory test samples and test specimens for chemical testing
- GOST R ISO 13528-2010 Statistical methods. Using in proficiency testing by interlaboratory comparison tests
- GOST 8179-1998 Refractory products. Sampling and acceptance testing
- GOST 8179-1985 Refractory products. Acceptance rules
- PNST 280-2018 Russian system of quality. Comparative testing of pure natural honey
- GOST R 54229-2010 Solid recovered fuels. Methods for the preparation of the test sample from the laboratory sample
- GOST ISO 4044-2014 Leather. Chemical tests. Preparation of chemical test samples
- GOST 29287-1992 Sodium hydroxide for industrial use. Sampling. Test sample. Preparation the main solution for testing
- GOST ISO/TS 22117-2013 Microbiology of food and animal feeding stuffs. Specific requirements and guidance for proficiency testing by interlaboratory comparison
- GOST R 52997-2008 Chrysotil. Acceptance rules, methods of sampling and preparation of samples for tests
- GOST 30432-1996 Metal tubes. Selection of samples, tube stocks and specimens for mechanic and technological tests
- PNST 276-2018 Russian system of quality. Comparative testing of casual shoes with uppers of leather
- GOST 19730-1974 Talc and talcomagnesite. Method of sampling and sample preparation for laboratory testing
- GOST 28588.2-1990 Rubber, vulcanized. Preparation of samples and test pieces. Part 2. Chemical tests
- GOST 15113.0-1977 Food concentrates. Rules of acceptance, sampling and preparation of samples
- GOST 9983-1974 Rubber. Methods of tests for repeated flexing of the pieces with a straight groove
- GOST 27851-1988 Hydraulic drive volumetric pumps. Accelerated comparative life tests
- GOST 28741-1990 Potato food products. Acceptance, sample preparation and test methods
- GOST 28588.1-1990 Rubber, vulcanized. Preparation of samples and test pieces. Part 1. Physical tests
- GOST R ISO 105-J02-1999 Textiles. Tests for colour fastness. Part J02. Instrumental assessment of relative whiteness
- GOST R 54941-2012 Comparative testing of concumer products and related services. General principles
- GOST R 54941-2012(2019) Comparative testing of concumer products and related services. General principles
- GOST 33510-2015 Solid recovered fuels. Methods for the preparation of the test sample from the laboratory sample
- GOST 17644-1983 Turf. Methods of sampling from deposit and preparation of samples for laboratory tests
- PNST 255-2017 Russian system of quality. Comparative testing of food common salt
- GOST ISO 17709-2013 Footwear. Sampling location, preparation and duration of conditioning of samples and test pieces
Group Standards of the People's Republic of China, Comparative test samples
- T/FDSA 022-2021 Food inspection and testing-General requirements for interlaboratory comparison
- T/CNTAC RM3-2023 CRM of cotton ballast for textiles washing test
AENOR, Comparative test samples
- UNE 30003:1956 CHEMICAL PRODUCTS. ANALYSIS REAGENTS. SPECIMENS FOR COMPARISON TESTS.
- UNE-EN ISO 664:2008 Oilseeds - Reduction of laboratory sample to test sample (ISO 664:2008)
- UNE 103400:1993 SIMPLE COMPRESSION RUPTURE TEST IN SOIL TEST SPECIMENS.
- UNE-EN 15413:2012 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample
- UNE-EN ISO 5089:2017 Textiles - Preparation of laboratory test samples and test specimens for chemical testing (ISO 5089:1977)
Professional Standard - Certification and Accreditation, Comparative test samples
- RB/T 208-2016 Internal quality control of chemical laboratory.Comparison test
ES-AENOR, Comparative test samples
VN-TCVN, Comparative test samples
- TCVN 4831-2009 Sensory analysis.Methodology.Paired comparison test
- TCVN 1749-1986 Woven fabrics.Sampling for testing
- TCVN 312-3-2007 Metallic materials.Charpy pendulum impact test.Part3:Preparation and characterization of Charpy V reference test pieces for verification of test machines
- TCVN 7501-2005 Bitumen.Test method for determination of density (Pycnometer method)
- TCVN 5347-1991 Graphite.Methods for sampling and preparation of samples for testing
- TCVN 7756-1-2007 Wood based panels.Test methods.Part 1: Sampling, Cutting of test pieces and expression of test results
- TCVN 5669-2013 Paints and varnishes.Examination and preparation of test samples
- TCVN 4833-2-2002 Meat and meat products.Sampling and preparation of test samples.Part 2: Preparation of test samples for microbiological examination
- TCVN 4787-2009 Methods of testing cement.Methods of taking and preparing samples of cement
- TCVN 4775-1989 Ores and concentrates of non-ferrous metals.Sampling and preparation of samples for laboratory tests
- TCVN 7190-2-2002 Refractories.Method for sampling.Part 2: Sampling and acceptance testing of shape products
European Committee for Standardization (CEN), Comparative test samples
- EN ISO 10399:2018 Sensory analysis - Methodology - Duo-trio test
- EN ISO 5495:2007 Sensory analysis - Methodology - Paired comparison test (ISO 5495:2005 and ISO 5495:2005/Cor 1:2006)
- EN ISO 10399:2010 Sensory analysis - Methodology - Duo-trio test
- EN ISO 148-3:2016 Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
- EN ISO 18314-4:2021 Analytical colorimetry - Part 4: Metamerism index for pairs of samples for change of illuminant (ISO 18314-4:2020)
- PD CEN/TR 15298:2006 Foodstuffs - Sample comminution for mycotoxins analysis - Comparison between dry milling and slurry mixing
- EN 13892-1:2002 Methods of test for screed materials - Part 1: Sampling, making and curing specimens for test
- EN ISO 5089:2016 Textiles - Preparation of laboratory test samples and test specimens for chemical testing
- EN 15413:2011 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample
- EN ISO 664:2008 Oilseeds - Reduction of laboratory sample to test sample
- EN ISO 148-3:2008 Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
- EN ISO 3727:1995 Butter - Determination of Water, Solids-not-Fat and Fat Contents on the Test Portion (Reference Method) (ISO 3727 : 1977)
- EN ISO 5495:2007/A1:2016 Sensory analysis - Methodology - Paired comparison test (ISO 5495:2005/Amd 1:2016)
- EN ISO 1513:2010 Paints and varnishes - Examination and preparation of test samples (ISO 1513:2010)
- EN 13523-22:2017 Coil coated metals - Test methods - Part 22: Colour difference - Visual comparison
- EN 1067:2005 Adhesives - Examination and preparation of samples for testing
- EN 1067:1997 Adhesives - Examination and Preparation of Samples for Testing
- EN 13523-22:2010 Coil coated metals - Test methods - Part 22: Colour difference - Visual comparison
- EN 13523-3:2001 Coil Coated Metals - Test Methods - Part 3: Colour Difference - Instrumental Comparison
- EN 13523-3:2021 Coil coated metals - Test methods - Part 3: Colour difference and metamerism - Instrumental comparison
Standard Association of Australia （SAA）, Comparative test samples
Danish Standards Foundation, Comparative test samples
- DS/EN ISO 5495:2007 Sensory analysis - Methodology - Paired comparison test
- DS/EN ISO 664:2008 Oilseeds - Reduction of laboratory sample to test sample
- DS/ISO 18314-4:2021 Analytical colorimetry – Part 4: Metamerism index for pairs of samples for change of illuminant
- DS/EN ISO 4044:2008 Leather - Chemical tests - Preparation of chemical test samples
- DS/EN ISO 18314-4:2021 Analytical colorimetry – Part 4: Metamerism index for pairs of samples for change of illuminant (ISO 18314-4:2020)
- DS/EN 15413:2011 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample
- DS/ISO 1513:1984 Paints and varnishes. Examination and preparation of samples for testing
- DS 423.21:1984 Testing of concrete, Making and curing of moulded test specimens for strength tests
- DS/EN ISO 148-3:2009 Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
GOSTR, Comparative test samples
- PNST 293-2018 Russian system of quality. Comparative testing of structured product from fish mince - crab sticks
- PNST 253-2017 Russian system of quality. Comparative testing of bed-clothes
- PNST 256-2017 Russian system of qualiti. Comparative testing of quit blanket
- PNST 286-2018 Russian system of quality. Comparative testing of ring–shaped rolls
- PNST 337-2018 Russian system of quality. Comparative testing of sewing wire products with thermostat fiber walls for children of preschool age groups
- PNST 259-2017 Russian system of quality. Comparative testing of pillows with fibre filler
Japanese Industrial Standards Committee (JISC), Comparative test samples
- JIS C 0043:1995 Environmental testing Part 2: Tests. Test Ec: Drop and topple, primarily for equipment-type specimens
- JIS K 6225:1998 Rubber, vulcanized -- Preparation of samples and test pieces -- Chemical tests
- JIS B 7740:1999 Charpy pendulum impact test -- Reference test pieces for verification of testing machines
- JIS K 7153:2008 Plastics -- Determination of linear dimensions of test specimens
NL-NEN, Comparative test samples
- NEN 1960-1967 Testing of pulp. Sampling and preparation of sample
- NEN 2584-1986 Shaped refractory products - Sampling and acceptance testing
工业和信息化部, Comparative test samples
- QC/T 520-2019 Test method for sample reduction of friction materials for automobiles
- QB/T 2716-2018 Preparation of Leather Chemical Test Samples
ZA-SANS, Comparative test samples
- SANS 5089:1977 Textiles - Preparation of laboratory test samples and test specimens for chemical testing
- SANS 5861-3:2006 Concrete tests - Making and curing of test specimens
- SANS 13253:2003 Ducted air-conditioners and air-to-air heat pumps - Testing and rating for performance
- SANS 904:2010 Leather - Chemical tests - Preparation of chemical test samples
- SANS 5001:1971 Sterility testing: sampling, criteria of compliance of a batch with sterility requirements
- SANS 174:1992 Paints and varnishes - Examination and preparation of samples for testing
- SANS 5983:2008 Preparation of test specimens for moisture content determination in timber and timber products
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Comparative test samples
- GB/T 10629-2009 Textiles.Preparation of laboratory test samples and test specimens for chemical testing
- GB/T 10629-1989 Textiles--Proparation of laboratory test samples and test specimens for chemical testing
- GB/T 18658-2002 Charpy V reference test pieces for verification of pendulum-type impact testing machines (ISO 148-3:1998,Metallic materials--Charpy pendulum impact test--Part 3: Preparation and characterization of charpy V reference test pieces for verification of test
- GB/T 17783-1999 Rubber, vulcanized--Preparation of samples and test pieces--Chemical tests
- GB/T 18658-2018 Charpy V-notch reference test pieces for indirect verification of pendulum impact testing machines
- GB/T 12682-1990 Test method for comparing colour stabilities of colour photographic images
- GB/T 11259-1999 Standard practice for fabrication and control of steel reference blocks used in ultrasonic inspection
- GB/T 6099.1-1985 Test method for maturity of cotton fibres--Lumen and wall thickness constract method
- GB/T 5441.8-1985 Test methods for communication cable--Test for frequency characteristic of attenuation coefficient of coaxial pair--Comparison method
- GB/T 2975-2018 Steel and steel products.Location and preparation of samples and test pieces for mechanical testing
- GB/T 2975-1998 Steel and steel products--Location and preparation of test pieces for mechanical testing
- GB/T 2007.3-1987 General rules for the sampling and sample preparation of minerals in bulk--Experimental method for evaluation of quality variation
- GB 2007.3-1987 General rules for sampling and sample preparation of bulk mineral products to assess quality fluctuation test method
- GB/T 20832-2007 Metallic materials Designation of test specimen axes in relation to product texture
- GB/T 16759-2008 General principles for comparative testing of consumer products and related services
- GB/T 16759-1997 Comparative testing of consumer products and related services--General principles
- GB/T 13268-1991 Atmospheric Air--Test Dust Standard Sample--Loess dust
- GB/T 13269-1991 Atmospheric Air--Test Dust Standard Sample--Fly Ash
- GB 13268-1991 Atmospheric test dust standard sample loess dust
- GB/T 6884-1986 Hardmetal products-Sampling and testing
- GB 13269-1991 Atmospheric test dust standard sample coal fly ash
- GB/T 15815-1995 Comparative test of performance for laundry detergents--Cycle of washing unsoiled cotton control cloth procedure
WRC - Welding Research Council, Comparative test samples
- BULLETIN 328-1987 SPECIMEN THICKNESS EFFECTS FOR ELASTIC-PLASTIC CTOD TOUGHNESS OF AN A36 STEEL ; AN ANALYTICAL AND EXPERIMENTAL COMPARISON OF RECTANGULAR AND SQUARE CTOD FRACTURE SPECIMENS OF AN A36 STEEL
- BULLETIN 358-1990 THE EFFECT OF CRACK DEPTH TO SPECIMEN WIDTH RATIO ON THE ELASTIC-PLASTIC FRACTURE TOUGHNESS OF A HIGH-STRENGTH LOW-STRAIN HARDENING STEEL
KR-KS, Comparative test samples
- KS K ISO 5089-2019 Textiles — Preparation of laboratory test samples and test specimens for chemical testing
- KS M ISO 4661-2-2020 Rubber, vulcanized — Preparation of samples and test pieces —Part 2: Chemical tests
IN-BIS, Comparative test samples
CZ-CSN, Comparative test samples
American Welding Society (AWS), Comparative test samples
- WRC 328:1987 Part 1: Specimen Thickness Effects for Elastic-Plastic CTOD Toughness of an A36 Steel; Part 2: An Analytical and Experimental Comparison of Rectangular and Square CTOD Fracture Specimens of an A36 Steel
- WRC 062:1960 Comparison And Analysis Of Notch Toughness Tests For Steels In Welded Structures
National Aeronautics and Space Administration (NASA), Comparative test samples
- NASA-TN-D-5390-1969 Effect of stress ratio on fatigue-crack growth in 7075-T6 and 2024-T3 aluminum-alloy specimens
Lithuanian Standards Office , Comparative test samples
- LST ISO 5089:1996 Textiles. Preparation of laboratory test samples and test specimens for chemical testing
- LST EN ISO 664:2008 Oilseeds - Reduction of laboratory sample to test sample (ISO 664:2008)
- LST EN 15413-2011 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample
- LST 1613-2000 Fish and fishery products. Acceptance rules, sampling methods and preparation of test samples
International Telecommunication Union (ITU), Comparative test samples
VE-FONDONORMA, Comparative test samples
ES-UNE, Comparative test samples
- UNE-EN ISO 18314-4:2022 Analytical colorimetry - Part 4: Metamerism index for pairs of samples for change of illuminant (ISO 18314-4:2020)
Military Standard of the People's Republic of China-General Armament Department, Comparative test samples
- GJB 8671.15-2015 Test methods for metallic cartridges Part 15: Comparative test of internal ballistic performance
- GJB 570.4-1988 Data acquisition and processing of dynamic comparison test of meteorological instrument finalization test method
American National Standards Institute （ANSI), Comparative test samples
Canadian General Standards Board （CGSB), Comparative test samples
Sichuan Provincial Standard of the People's Republic of China, Comparative test samples
机械工业部, Comparative test samples
- JB/T 7913-1995 Preparation and verification methods of steel comparison test blocks for ultrasonic testing
National Metrological Technical Specifications of the People's Republic of China, Comparative test samples
- JJF(建材)147-2018 Calibration Standard for Small Sample Shrinkage Inertia Friction and Wear Performance Testing Machines
- JJF(建材) 147-2018 Calibration specification for small scale inertial friction and wear performance testing machine
US-CFR-file, Comparative test samples
- CFR 40-1065.545-2014 Protection of Environment. Part1065:Engine-testing procedures. Section1065.545:Verification of proportional flow control for batch sampling.
未注明发布机构, Comparative test samples
SE-SIS, Comparative test samples
- SIS SS-ISO 5089:1990 Textiles — Preparation of laboratory test samples and test specimens for chemical testing.
- SIS SS 25 12 15-1981 Textiles — Preparation of laboratory test samples and test specimens for chemical testing
- SIS SS 83 25 10-1982 Machine-made textile floor coverings -Sampling and cutting specimens for physical tests
- SIS SS-ISO 1957:1989 Machine-made textile floor coverings — Sampling and cutting specimens for physical tests
Professional Standard - Light Industry, Comparative test samples
BG-BDS, Comparative test samples
Indonesia Standards, Comparative test samples
- SNI 13-6794-2002 Test methods for determination of fiber content on peat sample by drainage in the laboratory
CEN - European Committee for Standardization, Comparative test samples
- PD CEN/TS 15413:2006 Solid recovered fuels Methods for the preparation of the test sample from the laboratory sample
BE-NBN, Comparative test samples
AASHTO - American Association of State Highway and Transportation Officials, Comparative test samples
- T 227-2002 Standard Method of Test for Density@ Relative Density (Specific Gravity)@ or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
- T 146-1996 Standard Method of Test for Wet Preparation of Disturbed Soil Samples for Test
TH-TISI, Comparative test samples
- TIS 1182.3-1994 Standard test methods for petroleum and petroleum products.part 3: determination of density, relative density or api gravity.hydrometer method
- TIS 5043.1-1997 Proficiency testing by interlaboratory comparisons.part 1: development and operation of proficiency testing schemes
- TIS 5043.2-1997 Proficiency testing by interlaboratory comparisons.part 2: selection and use of proficiency testing schemes by laboratory accreditation bodies
BR-ABNT, Comparative test samples
TR-TSE, Comparative test samples
- TS 3085-1978 MACHINE — MADE TEXTILE FLOOR COVERINGS — SAMPLING AND CUTTING SPECIMENS FOR PHYSICAL TESTS
PT-IPQ, Comparative test samples
Professional Standard - Forestry, Comparative test samples
- LY/T 2400-2014 Color determination method of light-colored rosin and related products (platinum-cobalt scale)