ZH
RU
ES

Particle Diameter Analysis

Particle Diameter Analysis, Total:327 items.

In the international standard classification, Particle Diameter Analysis involves: Particle size analysis. Sieving, Environmental protection, Vocabularies, Fuels, Analytical chemistry, Ceramics, Construction materials, Rubber and plastics products, Soil quality. Pedology, Measurement of fluid flow, Paints and varnishes, Cork and cork products, Civil engineering in general, Tea. Coffee. Cocoa, Earthworks. Excavations. Foundation construction. Underground works, Cutting tools, Products of the chemical industry, Ferroalloys, Geology. Meteorology. Hydrology, Optical equipment, Linear and angular measurements, Road vehicles in general, Air quality, Sterilization and disinfection, Wastes, Tobacco, tobacco products and related equipment, Farming and forestry, Textile fibres, Rubber, Medical equipment, Welding, brazing and soldering, Semiconducting materials, Occupational safety. Industrial hygiene, Lubricants, industrial oils and related products, Hydraulic fluids, Fluid power systems, Ergonomics, Metalliferous minerals, Testing of metals, Milk and milk products, Road vehicle systems, Textile auxiliary materials, Physics. Chemistry, Diagnostic, maintenance and test equipment, Products of non-ferrous metals, Plastics, Coals, Products of the textile industry, Internal combustion engines for road vehicles, Insulating fluids.

Korean Agency for Technology and Standards (KATS), Particle Diameter Analysis

KS A ISO 9276-2:2003 Representation of results of particle size analysis-Part 2:Calculation of average particle sizes/diameters and moments from particle size distributions
KS A ISO 9276-2:2014 Representation of results of particle size analysis — Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions
KS A 0095-2007 Determination of particle size distribution by the weight of sedimentation in liquid
KS A ISO 9276-2-2014(2019) Representation of results of particle size analysis — Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions
KS D 2716-2008(2018) Measurement of nanoparticle diameter－Transmission electron microscope
KS M ISO 17829:2021 Solid Biofuels — Determination of length and diameter of pellets
KS M ISO 2030:2020 Granulated cork — Size analysis by mechanical sieving
KS E ISO 2325:2002 Coke－Size analysis(Nominal top size 20 mm or less)
KS E ISO 728:2002 Coke(nominal top size greater than 20 mm)－Size analysis by sieving
KS M ISO 8130-13:2008 Coating powders－Part 13：Particle size analysis by laser diffraction
KS E ISO 4701:2009 Iron ores and direct reduced iron－Determination of size distribution by sieving
KS I ISO 4021:2005 Hydraulic fluid power－Particulate contamination analysis－Extraction of fluid samples from lines of an operating system
KS H ISO 17175:2019 Bidis — Determination of total and nicotine-free dry particulate matter using a linear routine analytical smoking machine.
KS H ISO 4387:2017 Cigarettes－Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
KS H ISO 4387:2020 Cigarettes — Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine

Association Francaise de Normalisation, Particle Diameter Analysis

NF X11-632-2:2001 Representation of results of particle size analysis - Part 2 : calculation of average particle sizes/diameters and moments from particle size distributions.
NF B57-011:1973 Granulés crus de liège - Analyse granulométrique.
NF X11-630:2001 Particle size analysis - Vocabulary.
NF X34-111*NF EN ISO 17829:2016 Solid biofuels - Determination of length and diameter of pellets
NF EN ISO 17829:2016 Biocombustibles solides - Détermination de la longueur et du diamètre des granulés
NF X11-693:1983
NF X11-635:1985 Size analysis-Representation of particle size distributions - Reference models
NF X31-516:2007 Qualité du sol - Fractionnement granulodensimétrique des matières organiques particulaires du sol dans l'eau
NF X31-107:2003 Qualité du sol - Détermination de la distribution granulométrique des particules du sol - Méthode à la pipette
NF E75-101:2001 Coated abrasives - Grain size analysis - Part 2 : determination of grain size distribution of macrogrits P12 to P220.
NF T20-223:1973 Aluminium oxide primarily used for the production of aluminium. Particle size analysis. Sieving method.
NF E75-100*NF ISO 6344-1:2001 Coated abrasives - Grain size analysis - Part1 : grain size distribution test.
NF V37-001*NF ISO 4387:2020 Cigarettes - Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
NF X11-682:1984
NF EN 15415-3:2012 Combustibles solides de récupération - Détermination de la distribution granulométrique - Partie 3 : méthode par analyse d'images des particules de grande dimension
XP CEN ISO/TS 19590:2019 Nanotechnologies - Distribution granulométrique et concentration de nanoparticules inorganiques en milieu aqueux par spectrométrie de masse à plasma induit en mode particule unique
NF ISO 4387:2020 Cigarettes - Détermination de la teneur en matière particulaire totale et en matière particulaire anhydre et exempte de nicotine au moyen d'une machine à fumer analytique de routine
NF P94-056:1996 Soil : investigation and testing. Granulometric analysis. Dry sieving method after washing.
NF X11-632-4*NF ISO 9276-4:2001 Representation of results of particle size analysis - Part 4 : characterization of a classification process
NF X34-214-3*NF EN 15415-3:2012 Solid recovered fuels - Determination of particle size distribution - Part 3 : method by image analysis for large dimension particles
NF X11-685:1983
XP T47-752:2007 End of Life Tyres (ELF) - Determination of the particle size analysis of granulates issued from End of Life Tyres - Method based on the mechanical sieving of product
NF T70-335:1995 Energetic materials for defense. Physical-chemical analysis and properties. Determination of average diameter. Method with the sub-sieve-sizer Fisher.
NF R19-501-9:2011 Road vehicles - Cleanliness of components of fluid circuits - Part 9 : particle sizing and counting by automatic light extinction particle counter.
NF X11-683:1981
NF X43-133*NF EN ISO 28439:2011 Workplace atmospheres - Characterization of ultrafine aerosols/nanoaerosols - Determination of the size distribution and number concentration using differential mobility analysing systems.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Particle Diameter Analysis

GB/T 22231-2008 Particle Size Distribution/Fiber Length and Diameter Distribution
GB/T 42348-2023 Particle Size Analysis Particle Tracking Analysis (PTA)
GB/T 15445.2-2006 Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distibutions
GB/T 15445-1995 Graphical representation of results of particle size analysis
GB/T 41949-2022 Particle─Laser particle size analyser─Technical requirements
GB 15445-1995 Graphical representation of particle size analysis results
GB/T 29024.3-2012 Determination of particle size distribution.Single particle light interaction methods.Part 3:Light extinction liquid-borne particle counter
GB/T 29024.2-2016 Determination of particle size distribution.Single particle light interaction methods.Part 2:Light scattering liquid-borne particle counter
GB/T 25051-2010 Ferronickel shot.Sampling for analysis
GB/T 20732-2006 Optical fiber diameter analyser
GB/T 38517-2020 Particulate—Bioaerosols sampling and analysis—General principles
GB/T 32668-2016 Analysis of zeta potential of colloids.Electrophoresis guidelines
GB/T 38517-2020(英文版) Particulate—Bioaerosols sampling and analysis—General principles
GB/T 27991-2011 Fundamental technical requirements for sediment measurement and particle size analysis instrument in open channel
GB/T 17489-1998 Hydraulic fluid power--Particulate contamination analysis--Extraction of fluid samples from lines of an operating system
GB/T 21030-2007 Test method for the mean and distribution and distribution of fibre diameter of wool and other animal fibre.Optical fibre diameter analyser(OFDA)
GB/T 17489-2022 Hydraulic fluid power—Particulate contamination analysis—Extraction of fluid samples from lines of an operating system
GB/T 6609.37-2009 Chemical analysis methods and determination of physical performance of alumina-Part 37: Determination of the particles size content less than 20μm

International Organization for Standardization (ISO), Particle Diameter Analysis

ISO 19430:2016 Particle size analysis - Particle tracking analysis (PTA) method
ISO 9276-2:2001 Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions
ISO 9276-2:2014 Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions
ISO 15900:2020 Determination of particle size distribution — Differential electrical mobility analysis for aerosol particles
ISO 13320:2009 Particle size analysis - Laser diffraction methods
ISO 22412:2017 Particle size analysis - Dynamic light scattering (DLS)
ISO 728:1981 Coke (nominal top size greater than 20 mm); Size analysis
ISO 17867:2015 Particle size analysis - Small-angle X-ray scattering
ISO/DIS 19430 Determination of particle size distribution and number concentration by particle tracking analysis (PTA)
ISO 9276-6:2008 Representation of results of particle size analysis - Part 6: Descriptive and quantitative representation of particle shape and morphology
ISO 4021:1992 Hydraulic fluid power; particulate contamination analysis; extraction of fluid samples from lines of an operating system
ISO 16232-9:2007 Road vehicles - Cleanliness of components of fluid circuits - Part 9: Particle sizing and counting by automatic light extinction particle counter
ISO/TR 23173:2021 Surface chemical analysis - Electron spectroscopies - Measurement of the thickness and composition of nanoparticle coatings
ISO 4021:1977 Hydraulic fluid power — Particulate contamination analysis — Extraction of fluid samples from lines of an operating system
ISO/TS 19713-2:2010 Road vehicles - Inlet air cleaning equipment for internal combustion engines and compressors - Part 2: Fractional efficiency testing with coarse particles (5 μm to 40 μm optical diameter)
ISO 16232-8:2007 Road vehicles - Cleanliness of components of fluid circuits - Part 8: Particle nature determination by microscopic analysis

British Standards Institution (BSI), Particle Diameter Analysis

BS ISO 19430:2016 Particle size analysis. Particle tracking analysis (PTA) method
BS ISO 9276-2:2001 Representation of results of particle size analysis - Calculation of average particle sizes/diameters and moments from particle size distributions
BS ISO 9276-2:2014 Representation of results of particle size analysis. Calculation of average particle sizes/diameters and moments from particle size distributions
23/30436644 DC BS ISO 19430. Determination of particle size distribution and number concentration by particle tracking analysis (PTA)
BS ISO 17867:2015 Particle size analysis. Small-angle X-ray scattering
BS ISO 15900:2020 Determination of particle size distribution. Differential electrical mobility analysis for aerosol particles
BS DD CEN/TS 15415:2006 Solid recovered fuels - Determination of particle size and particle size distribution by screen method
BS DD ISO/TS 13762:2002 Particle size analysis - Small angle X-ray scattering method
BS ISO 13067:2011 Microbeam analysis. Electron backscatter diffraction. Measurement of average grain size
BS ISO 9286:1997 Abrasive grains and crude - Chemical analysis of silicon carbide
BS ISO 4387:2000+A1:2008 Cigarettes - Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
19/30370177 DC BS ISO 15900. Determination of particle size distribution. Differential electrical mobility analysis for aerosol particles
BS EN 15415-3:2012 Solid recovered fuels. Determination of particle size distribution. Method by image analysis for large dimension particles
BS ISO 9285:1997 Abrasive grains and crude - Chemical analysis of fused aluminium oxide
BS ISO 4387:2019 Cigarettes. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
BS ISO 4387:2000+A2:2017 Cigarettes. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
BS ISO 17175:2017 Bidis. Determination of total and nicotine-free dry particulate matter using a linear routine analytical smoking machine
20/30400951 DC BS ISO 9286. Abrasive grains and crude. Chemical analysis of silicon carbide
BS ISO 9276-6:2008 Representation of results of particle size analysis - Descriptive and quantitative representation of particle shape and morphology
17/30337552 DC BS ISO 17175. Bidis. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
BS EN 12457-4:2002 Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges. One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with size reduction)
BS ISO 4701:2008 Iron ores and direct reduced iron. Determination of size distribution by sieving
BS 1743-19:1985 Methods for analysis of dried milk and dried milk products - Determination of scorched particles content
DD CEN/TS 15439:2006 Biomass gasification. Tar and particles in product gases. Sampling and analysis
BS ISO 16232-8:2007 Road vehicles - Cleanliness of components of fluid circuits - Particle nature determination by microscopic analysis
BS EN 1015-1:1999 Methods of test for mortar for masonry - Determination of particle size distribution (by sieve analysis)
BS PD ISO/TR 23173:2021 Surface chemical analysis. Electron spectroscopies. Measurement of the thickness and composition of nanoparticle coatings
BS EN 12457-2:2002 Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges. One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 4 mm (without or with size reduction)
BS 3406-4:1993 Methods for determination of particle size distribution - Guide to microscope and image analysis methods
BS ISO 16232-6:2007 Road vehicles - Cleanliness of components of fluid circuits - Particle mass determination by gravimetric analysis
BS 3900-J13:2001 Methods of test for paints - Testing of coating powders - Particle size analysis by laser diffraction

CZ-CSN, Particle Diameter Analysis

Danish Standards Foundation, Particle Diameter Analysis

DS/ISO 15900:2020 Determination of particle size distribution – Differential electrical mobility analysis for aerosol particles
DS/EN 16127:2012 Solid biofuels - Determination of length and diameter of pellets
DS/ISO 4387/Amd. 1:2008 Cigarettes - Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
DS/ISO 4387:2000 Cigarettes - Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
DS/EN 15415-3:2012 Solid recovered fuels - Determination of particle size distribution - Part 3: Method by image analysis for large dimension particles
DS/CEN/TS 15439:2007 Biomass gasification - Tar and particles in product gases - Sampling and analysis

The American Road & Transportation Builders Association, Particle Diameter Analysis

AASHTO T 88-2000 Standard Method of Test Particle Size Analysis of Soils
AASHTO T311-2000 Standard Method of Test for Grain-Size Analysis of Granular Soil Materials Twentieth Edition
AASHTO T 311-2000 Standard Method of Test for Grain-Size Analysis of Granular Soil Materials

Japanese Industrial Standards Committee (JISC), Particle Diameter Analysis

JIS Z 8829:2021 Particle size analysis -- Particle tracking analysis (PTA) method
JIS R 1639-1:1999 Test methods of properties of fine ceramic granules Part 1: Size distribution of granules
JIS Z 8819-2:2001 Representation of results of particle size analysis -- Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions
JIS Z 8826:2005 Particle size analysis -- Photon correlation spectroscopy
JIS H 7802:2005 Testing method of ultrafine metal particles for ignition temperature by differential thermal analysis

国家市场监督管理总局、中国国家标准化管理委员会, Particle Diameter Analysis

GB/T 38879-2020 Particle—Size analysis—Color image analysis methods
GB/T 35099-2018 Microbeam analysis—Scanning electron microscopy with energy dispersive X-ray spectrometry—Morphology and element analysis of single fine particles in ambient air

RU-GOST R, Particle Diameter Analysis

GOST 33399-2015 Testing of chemicals of environmental hazard. Determination of the particle size distribution/determination of the fibre length and diameter distribution. Method A: Particle size distribution (effective hydrodynamic radius). Method B: Fibre length and dia
GOST 2093-1982 Solid fuel. Size analysis
GOST ISO 11286-2014 Tea. Classification by particle size analysis
GOST R 55552-2013 Solid recovered fuels. Determination of particle size distribution. Part 3. Method by image analysis for large dimension particles
GOST 32520-2013 Iron ores, concentrates, agglomerates and pellets. General requirements to the methods of chemical analyses
GOST R 50556-1993 Hydraulic fluid power. Particulate contamination analysis. Extraction of fluid samples from lines of an operating systems
GOST 32518.2-2013 Iron ores, concentrates, agglomerates and pellets. Determination of silica spectrophotometric method

Lithuanian Standards Office , Particle Diameter Analysis

LST EN 16127-2012 Solid biofuels - Determination of length and diameter of pellets
LST ISO 4387:2000 Cigarettes. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
LST EN 15415-3-2012 Solid recovered fuels - Determination of particle size distribution - Part 3: Method by image analysis for large dimension particles
LST ISO 4387:2000/A1:2008 Cigarettes - Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine - AMENDMENT 1 (ISO 4387:2000/Amd.1:2008, identical)

GOSTR, Particle Diameter Analysis

GOST 34089-2017 Solid biofuel. Determination of length and diameter of pellets

KR-KS, Particle Diameter Analysis

KS M ISO 17829-2021 Solid Biofuels — Determination of length and diameter of pellets
KS D 2716-2023 Measurement of nanoparticle diameter — Transmission electron microscope
KS M ISO 2030-2020 Granulated cork — Size analysis by mechanical sieving
KS H ISO 17175-2019 Bidis — Determination of total and nicotine-free dry particulate matter using a linear routine analytical smoking machine.
KS H ISO 4387-2020 Cigarettes — Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine

German Institute for Standardization, Particle Diameter Analysis

DIN EN ISO 17829:2016-03 Solid biofuels - Determination of length and diameter of pellets (ISO 17829:2015); German version EN ISO 17829:2015
DIN ISO 9276-2:2018-09 Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions (ISO 9276-2:2014)
DIN EN ISO 17829:2016 Solid biofuels - Determination of length and diameter of pellets (ISO 17829:2015)
DIN ISO 9276-2:2018 Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions (ISO 9276-2:2014)
DIN ISO 9276-2:2006 Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions (ISO 9276-2:2001);English version of DIN ISO 9276-2:2006-02
DIN 50452-2:2009-10 Testing of materials for semiconductor technology - Test method for particle analysis in liquids - Part 2: Determination of particles by optical particle counters
DIN EN 12457-2:2003 Characterization of waste - Leaching; Compliance test for leaching of granular and sludges - Part 2: One stage batch test at a liquid to solid ratio of 10 l/kg with particle size below 4 mm (without or with size reduction); German version EN 12457-2:2002
DIN EN 12457-1:2003 Characterization of waste - Leaching; Compliance test for leaching of granular and sludges - Part 1: One stage batch test at a liquid to solid ration of 2 l/kg with particle size below 4 mm (without or with size reduction); German version EN 12457-1:2002
DIN ISO 22412:2018 Particle size analysis - Dynamic light scattering (DLS) (ISO 22412:2017)
DIN EN 12457-4:2003 Characterization of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with limited size redu
DIN ISO 4387:2021-03 Cigarettes - Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine (ISO 4387:2019)
DIN 50452-1:1995-11 Testing of materials for semiconductor technology - Test method for particle analysis in liquids - Part 1: Microscopic determination of particles
DIN 50452-2:1991 Testing of materials for semiconductor technology; test method for particle analysis in liquids; determination of particles with optical particle counters
DIN 66111 Bb.1:1989 Particle size analysis; sedimention analysis; principles; evaluation equations for determination of quantities in the field of centrifugal force
DIN EN 15415-3:2012-06 Solid recovered fuels - Determination of particle size distribution - Part 3: Method by image analysis for large dimension particles; German version EN 15415-3:2012
DIN ISO 9276-6:2012-01 Representation of results of particle size analysis - Part 6: Descriptive and quantitative representation of particle shape and morphology (ISO 9276-6:2008)
DIN 66135-3:2001 Particle characterization - Micropore analysis by gas adsorption - Part 3: Determination of the micropore volume according to Dubini and Radushkevich
DIN 66135-2:2001 Particle characterization - Micropore analysis by gas adsorption - Part 2: Evaluation by isotherms comparison
DIN CEN/TS 15439:2006-08 Biomass gasification - Tar and particles in product gases - Sampling and analysis; German version CEN/TS 15439:2006
DIN 66135-1:2001 Particle characterization - Micropore analysis by gas adsorption - Part 1: Fundamentals and testing procedure
DIN ISO 9276-6:2012 Representation of results of particle size analysis - Part 6: Descriptive and quantitative representation of particle shape and morphology (ISO 9276-6:2008)
DIN EN 12457-3:2021 Characterization of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 3: Two stage batch test at a liquid to solid ratio of 2 l/kg and 8 l/kg for materials with high solid content with particle size below 4 mm
DIN EN 12457-3:2003 Characterization of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 3: Two stage batch test at a liquid to solid ratio of 2 l/kg and 8 l/kg for materials with high solid content with particle size below 4 mm (
DIN ISO 2889 Beiblatt 1:2012-10 Sampling airborne radioactive materials from the stacks and ducts of nuclear facilities - Supplement 1: Distribution of activity via the diameter of aerosol particles
DIN 66135-1:2001-06 Particle characterization - Micropore analysis by gas adsorption - Part 1: Fundamentals and testing procedure
DIN EN 15415-3:2012 Solid recovered fuels - Determination of particle size distribution - Part 3: Method by image analysis for large dimension particles; German version EN 15415-3:2012
DIN 53477:1992 Testing of plastics; determination of particle size distribution of moulding materials by dry sieving analysis
DIN 53477:2018 Testing of plastics - Determination of particle size distribution of moulding materials by dry sieving analysis
DIN 50452-3:1995 Testing of materials for semiconductor technology - Test method for particle analysis in liquids - Part 3: Calibration of optical particle counters
DIN 66135-4:2004 Particle size analysis - Micropore analysis by gas adsorption - Part 4: Determination of pore distribution according to Horvath-Kawazoe and Saito-Foley
DIN 66135-2:2001-06 Particle characterization - Micropore analysis by gas adsorption - Part 2: Evaluation by isotherms comparison
DIN 66135-3:2001-06 Particle characterization - Micropore analysis by gas adsorption - Part 3: Determination of the micropore volume according to Dubini and Radushkevich

ES-UNE, Particle Diameter Analysis

UNE-EN ISO 17829:2016 Solid biofuels - Determination of length and diameter of pellets (ISO 17829:2015)
UNE-ISO 4387:2008/Amd 2:2018 Cigarettes. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine.
UNE-ISO 4387:2008/Amd.1:2010 Cigarettes. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine.

ES-AENOR, Particle Diameter Analysis

UNE 56-918-1990

ZA-SANS, Particle Diameter Analysis

SANS 6244:2006 Particles of diameter not exceeding 20 ?m and not exceeding 5 ?m and smaller, respectively, in fine aggregate (pipette method)
SANS 3001-GR2:2009 Civil engineering test methods Part GR2: Dry preparation and dry particle size analysis of graded materials
SANS 3001-AG1:2009 Civil engineering test methods Part AG1: Particle size analysis of aggregates by sieving
SANS 6241:2006 Particle size distribution of material of diameter smaller than 75 ?m in fine aggregate (hydrometer method)

CL-INN, Particle Diameter Analysis

AR-IRAM, Particle Diameter Analysis

IRAM 17 017-1963

HU-MSZT, Particle Diameter Analysis

American Society for Testing and Materials (ASTM), Particle Diameter Analysis

ASTM D7486-22 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
ASTM E1037-15 Standard Test Method for Measuring Particle Size Distribution of RDF-5
ASTM D8090-17 Standard Test Method for Particle Size Distribution and Shape Analysis of Paints and Pigments Using Dynamic Imaging Methods
ASTM E2651-10 Standard Guide for Powder Particle Size Analysis
ASTM E871-82(1998) Standard Method of Moisture Analysis of Particulate Wood Fuels
ASTM D422-63(2007)e1 Standard Test Method for Particle-Size Analysis of Soils
ASTM D422-63(1998) Standard Test Method for Particle-Size Analysis of Soils
ASTM D7486-14 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
ASTM E871-82(2019) Standard Test Method for Moisture Analysis of Particulate Wood Fuels
ASTM D5644-01(2008) Standard Test Methods for Rubber Compounding Materials Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber
ASTM E2524-08 Standard Test Method for Analysis of Hemolytic Properties of Nanoparticles
ASTM D8049-17 Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Particle Analyzer
ASTM D8049-16 Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Particle Analyzer
ASTM D7486-08 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
ASTM D7486-08(2013)e1 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
ASTM D5644-01(2013) Standard Test Methods for Rubber Compounding Materialsmdash;Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber
ASTM D7596-23 Standard Test Method for Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging Integrated Tester
ASTM D7596-14 Standard Test Method for Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging Integrated Tester
ASTM D5644-01 Standard Test Methods for Rubber Compounding Materials8212Determination of Particle Size Distribution of Recylced Vulcanizate Particulate Rubber
ASTM D5644-01(2008)e1 Standard Test Methods for Rubber Compounding Materials Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber
ASTM D7596-10 Standard Test Method for Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging Integrated Tester
ASTM D6500-00(2012)e1 Standard Test Method for Diameter of Wool and Other Animal Fibers Using an Optical Fiber Diameter Analyser
ASTM D6913-04e2 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM D6913/D6913M-17 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM D7928-16 Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis
ASTM E2578-07 Standard Practice for Calculation of Mean Sizes/Diameters and Standard Deviations of Particle Size Distributions
ASTM E872-82(1998) Standard Test Method for Volatile Matter in the Analysis of Particulate Wood Fuels
ASTM E872-82(2019) Standard Test Method for Volatile Matter in the Analysis of Particulate Wood Fuels
ASTM D5519-07 Standard Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials
ASTM D6913-04(2009)e1 Standard Test Methods for Particle-Size Distribution 40;Gradation41; of Soils Using Sieve Analysis
ASTM D451-91(1996)e1 Standard Test Method for Sieve Analysis of Granular Mineral Surfacing For Asphalt Roofing Products
ASTM D451/D451M-17 Standard Test Method for Sieve Analysis of Granular Mineral Surfacing For Asphalt Roofing Products
ASTM E2834-12(2018) Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Nanoparticle Tracking Analysis (NTA)
ASTM E2834-12(2022) Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Nanoparticle Tracking Analysis (NTA)
ASTM D8049-16a Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Particle Analyzer
ASTM D6500-00(2006) Standard Test Method for Diameter of Wool and Other Animal Fibers Using an Optical Fiber Diameter Analyser
ASTM D6500-00 Standard Test Method for Diameter of Wool and Other Animal Fibers Using an Optical Fiber Diameter Analyser
ASTM D6466-10(2018) Standard Test Method for Diameter of Wool and Other Animal Fibers By Sirolan-Laserscan Fiber Diameter Analyser
ASTM D5519-14 Standard Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials
ASTM D5519-15 Standard Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials
ASTM E2578-07(2012) Standard Practice for Calculation of Mean Sizes/Diameters and Standard Deviations of Particle Size Distributions
ASTM E2834-12 Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Nanoparticle Tracking Analysis (NTA)
ASTM D6466-10 Standard Test Method for Diameter of Wool and Other Animal Fibers By Sirolan-Laserscan Fiber Diameter Analyser
ASTM D6466-99(2005) Standard Test Method for Diameter of Wool and Other Animal Fibers By Sirolan-Laserscan Fiber Diameter Analyser
ASTM D6466-99 Standard Test Method for Diameter of Wool and Other Animal Fibers By Sirolan-Laserscan Fiber Diameter Analyser

Xinjiang Provincial Standard of the People's Republic of China, Particle Diameter Analysis

DB65/T 602.12-2001 The determinanation of soil particle-size composition(mechanical composition
DB65/T 2615-2006 Test Method of Determing Wool and Cashmerer Fibres Diameter by Optical Fibre Diameter Analyser(OFDA)

BR-ABNT, Particle Diameter Analysis

ABNT MB-32-1968

PT-IPQ, Particle Diameter Analysis

E 239-1970
NP 3755-1-1999 Solid fuels.Cokes.Size analysis.Part 1:Particle size 20mm or less
I-1636-1981
NP 3755-2-1989 SOLID FUELS Cokes Size analysis. Part 2: Nominal top size greater than 20 mm
NP 3755-1-1989 SOLID FUELS Cokes Size analysis. Part 1: Nominal top size 20 mm or less
E 245-1971
NP 3862-1999 Solid fuels. Medium and High-Rank coals. Size analysis by sieving
NP 3862-1-2001 Solid fuels Médium and High-Rank coals Size analysis by sieving

Professional Standard - Water Conservancy, Particle Diameter Analysis

SL 42-1992 Technical standard for determination of sediment particle size in open channels
SL 42-2010 Technical standard for determination of sediment particle size in open channels
SL 42-1992（条文说明） Technical standard for determination of sediment particle size in open channels(explanation)
SL 237-006-1999 Code for test of soil - grain size analysis test
SL/T 208-1998 Instrument for sediment measurement and particle size analysis in open channel

European Committee for Standardization (CEN), Particle Diameter Analysis

EN ISO 17829:2015 Solid biofuels - Determination of length and diameter of pellets (ISO 17829:2015)
EN ISO 8049:2016 Ferronickel shot - Sampling for analysis
EN 12457-4:2002 Characterisation of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with size reduction)
EN 15415-3:2012 Solid recovered fuels - Determination of particle size distribution - Part 3: Method by image analysis for large dimension particles
EN 1744-1:2009 Tests for chemical properties of aggregates - Part 1: Chemical analysis (Incorporates Amendment A1: 2012)
CEN/TS 15439:2006 Biomass gasification - Tar and particles in product gases - Sampling and analysis

Taiwan Provincial Standard of the People's Republic of China, Particle Diameter Analysis

CNS 11776-1986 Method of Test for Particle-Size Analysis of Soils
CNS 12385-1988 3
CNS 5086-1986 1

Group Standards of the People's Republic of China, Particle Diameter Analysis

T/SDAS 308-2021 Soil Particle Grading Analysis Laser Method

RO-ASRO, Particle Diameter Analysis

STAS 8179/3-1975 LOW-DENSITY POLYETHYLENE GRANULESMethods of analysis

NATO - North Atlantic Treaty Organization, Particle Diameter Analysis

AFLP-3713-2014 DETERMINATION OF PARTICULATE MATTER IN AEROSPACE HYDRAULIC FLUIDS USING A PARTICLE ANALYSER (ED A@ Ver 1; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (
STANAG 3713-1990 Determination of Particulate Matter in Aerospace Hydraulic Fluids Using a Particle Size Analyser (ED 3 AMD 1; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +

Professional Standard - Meteorology, Particle Diameter Analysis

QX/T 72-2007 Determination of number size distribution of submicron particle by using Electrical Mobility Method

Professional Standard - Machinery, Particle Diameter Analysis

JB/T 10556-2006 Optical fibre diameter analyser

Association of German Mechanical Engineers, Particle Diameter Analysis

VDI 3867 Blatt 5-2013 Measurement of particles in ambient air - Determination of the particle number concentration and particle size distribution of aerosols - Time-of-flight spectrometer
VDI 2268 Blatt 3-1988 Chemical analysis of particulate matter; determination of thallium in particulate emissions by atomic absorption spectrometry
VDI 3867 Blatt 4-2011 Measurement of particles in ambient air - Determination of the particle number concentration and particle size distribution of aerosols - Optical aerosol spectrometer
VDI 3867 Blatt 3-2012 Measurement of particles in ambient air - Determination of the particle number concentration and number size distribution of aerosols - Electrical mobility spectrometer
VDI 3867 Blatt 2-2008 Measurement of particulate matter in ambient air - Methods for characterizing test aerosols - Determination of the particle number concentration and particle size distribution - Condensation Particle Counter (CPC)
VDI 2268 Blatt 1-1987 Chemical analysis of particulate matter; determination of Ba, Be, Cd, Co, Cr, Cu, Ni, Pb, Sr, V, Zn in particulate emissions by atomic spectrometric methods

GB-REG, Particle Diameter Analysis

REG NASA-LLIS-0846-2000 Lessons Learned ?Wear Particle Analysis Using Ferrography

AENOR, Particle Diameter Analysis

UNE 56918:1990 GRANULATED CORK. SIZE ANALISYS BY MECHANICAL SIEVING.
UNE 103101:1995 PARTICLE SIZE ANALYSIS OF A SOIL BY SCREENING.
UNE-ISO 4387:2008 Cigarettes. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine.
UNE-ISO 4387:2008/A1:2010 Cigarettes. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine.
UNE 103102:1995 PARTICLE SIZE ANALYSIS OF A FINE SOIL BY SEDIMENTATION. DENSIMETER METHOD.
UNE-EN 15415-3:2012 Solid recovered fuels - Determination of particle size distribution - Part 3: Method by image analysis for large dimension particles

YU-JUS, Particle Diameter Analysis

JUS K.F0.081-1989 Grains of diamond and cubic boroo nitri?e for bonded abrasive products. Grain sizes dlstribution and designat ion
JUS B.B8.036-1982 Crushed aggregate. Determination of fine particles with the wet sieve analysis
JUS K.F0.002-1989 GraJns of fused aluminium oxide and silicon carbide for boodod abrasivc products. Grain si?e analysis of macrogrits F 4 to F 220
JUS K.F0.033-1989 GraJns of fused aluminium oxlde and sIlIcon carbide for coated abrasive producls. Grain slze analysis of microgrits P 240 to P 1200
JUS K.F0.032-1989 Grains of fused aluminium oxJde and slllcon carbide for coated abrasive products. Graln sir.e analysls of macrogrlts P 12 to P 220
JUS K.F0.004-1989 Gralns of fused alumlnium oxide and slllccm carbide for bonded abrasive. products. Grala si?e analysis of microgrits P 230 to F 1200

Standard Association of Australia （SAA）, Particle Diameter Analysis

AS 3580.9.7:1990 Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - PM(sub)10(/sub) dichotomous sampler - Gravimetric method
AS/NZS 4616:1999 Abrasive grains and crudes - Chemical analysis of silicon carbide
AS/NZS 3580.9.3:2015 Methods for sampling and analysis of ambient air, Method 9.3: Determination of suspended particulate matter — Total suspended particulate matter (TSP) — High volume sampler gravimetric method
AS 3580.9.8:2001 Methods for sampling and analysis of ambient air Method 9.8: Determination of suspended particulate matter--PM continuous direct mass method using a tapered element oscillating microbalance analyser
AS 3580.9.8:2022 Methods for sampling and analysis of ambient air, Method 9.8: Determination of suspended particulate matter — PM10 continuous direct mass method using a tapered element oscillating microbalance analyser
AS/NZS 3580.10.2:2013

CU-NC, Particle Diameter Analysis

NC 04-67-1985 Materials Testing. Metallic Powders. Granulometry Analysis by Sieving
NC 93-02-221-1986 Standards System for Environmental Protection. Atmosphere. Gravimetric Determination of Float Dust

Professional Standard - Construction Industry, Particle Diameter Analysis

JG/T 5066-1996 Determination of solid particulate contaminant in fluids by the gravimetric method

Inner Mongolia Provincial Standard of the People's Republic of China, Particle Diameter Analysis

DB15/T 883-2015 Mean fiber diameter and fiber diameter distribution determination method Sirolan (sirolan) - laser scanning fiber diameter analyzer method

AASHTO - American Association of State Highway and Transportation Officials, Particle Diameter Analysis

T 311-2000 Standard Method of Test for Grain-Size Analysis of Granular Soil Materials (Twentieth Edition)

North Atlantic Treaty Organization Standards Agency, Particle Diameter Analysis

STANAG 3713-2008 DETERMINATION OF PARTICULATE MATTER IN AEROSPACE HYDRAULIC FLUIDS USING A PARTICLE SIZE ANALYSER

BE-NBN, Particle Diameter Analysis

NBN T 03-421-1983 Aluminium oxide primarily used for the production of aluminium - Particle size analysis - Sieving method
NBN M 02-005-1975 Solid minerai fuels - Size analysis of coke

中国石油天然气总公司, Particle Diameter Analysis

SY/T 6175-1995 Physical property analysis method of full-diameter core under pressure

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Particle Diameter Analysis

IPC TM-650 2.2.14.2-1995 Solder Powder Particle Size Distribution - Optical Image Analyzer Method

PL-PKN, Particle Diameter Analysis

PN Z04097 Arkusz 07-1974 Air purity protection Tests for size composition of dust Sieve analysis
PN C89421-1991 Aqueous dispersions of polymers and copolymers. Determination of gross particle content by sieve analysis

TH-TISI, Particle Diameter Analysis

TIS 2574-2012 Airborne particulate matter sampling and analysis in workplace environment

Professional Standard - Petrochemical Industry, Particle Diameter Analysis

SH/T 0573-1993 In-use Lubricating Oil Wear Particle Test (Analytical Ferrography)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Particle Diameter Analysis

GB/T 35935-2018 Measurement of the mean and distribution of animal fibre diameter—Laserscan fibre diameter analysis method
GB/T 29024.4-2017 Determination of particle size distribution－Single particle light interaction methods－Part 4: Light scattering airborne particle counter for clean spaces
GB/T 15445.6-2014 Representation of results of particle size analysis—Part 6: Descriptive and quantitative representation of particle shape and morphology
GB/T 35309-2017 Practice for evaluation of granular polysilicon by melter-zoner and spectroscopies

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Particle Diameter Analysis

ASHRAE 4758-2005 Comparison of Two Models for Particle Separation in a Vane-Induced Uniflow Cyclone

American Welding Society (AWS), Particle Diameter Analysis

AWS F1.4-1997 Methods for Analysis of Airborne Particulates Generated by Welding and Allied Processes

CEN - European Committee for Standardization, Particle Diameter Analysis

PD CEN/TS 15439:2006 Biomass gasification - Tar and particles in product gases - Sampling and analysis

AWS - American Welding Society, Particle Diameter Analysis

F1.4-1987 Methods for Analysis of Airborne Particulates Generated by Welding and Allied Processes
F1.4-1997 Methods for Analysis of Airborne Particulates Generated by Welding and Allied Processes

PH-BPS, Particle Diameter Analysis

PNS ISO 19007:2021 Nanotechnologies - In vitro MTS assay for measuring the cytotoxic effect of nanoparticles

Professional Standard - Energy, Particle Diameter Analysis

NB/SH/T 6017-2020 Test Method for Automatic Particle Counting and Particle Shape Classification of Oil Using a Direct Imaging Synthetic Test Apparatus

Professional Standard - Agriculture, Particle Diameter Analysis

NY/T 2222-2012 Test for the average diameter and component of animal fiber.Microscopic image analyser
空气和废气监测分析方法 7.2.1-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulate Matter Chapter 2 Sample Collection of Atmospheric Particulate Matter Emission Sources—Classification of Particulate Matter Pollutio

AT-ON, Particle Diameter Analysis

ONORM L 1061-2-2002 Physical analysis of soils - Determination of particle size distribution in mineral soils - Part 2: Feinboden
ONORM L 1061-1-2002 Physical analysis of soils - Determination of particle size distribution in mineral soils-Part 1: Coarse soil
ONORM M 5858-1997 Air analysis - Ambient air monitoring - Requirements for monitors for suspended particulate matter - Marking of conformity

IN-BIS, Particle Diameter Analysis

IS 6339-1971

European Association of Aerospace Industries, Particle Diameter Analysis

AECMA PREN 3347-1988 Aerospace Series Aluminium Alloy (2024) Solution Treated, Stretched and Artificially Aged (T8511) Extruded Bars and Sections (a or D) Less Than or Equal to 150mm with Peripheral Coarse Grain Control Issue P 1
AECMA PREN 3348-1988 Aerospace Series Aluminium Alloy (2024) Solution Treated and Artificially Aged (T62) Plate 6 Less Than or Equal to a Less Than or Equal to 50 mm Issue P 1
AECMA PREN 3337-1988 Aerospace Series Aluminium Alloy (7010) Solution Treated and Artificially Aged (T74511) Extruded Bars and Sections (a or D) Less Than or Equal to 130 mm with Peripheral Coarse Grain Control Issue P 1
AECMA PREN 3338-1988 Aerospace Series Aluminium Alloy (7050) Solution Treated and Artificially Aged (T74511) Extruded Bars and Sections (a or D) Less Than or Equal to 130 mm with Peripheral Coarse Grain Control Issue P 1

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Particle Diameter Analysis

ASHRAE KC-03-11-1-2003 Analysis and Validation of Particle Separation Efficiency in a Centrifugal Field Under Laminar and Perfect Mixing Conditions

Professional Standard - Textile, Particle Diameter Analysis

FZ/T 20026-2013 Test method for fibre length and diameter of wool top & slivers.Optical analyser

VN-TCVN, Particle Diameter Analysis

TCVN 4777-1989 Ores and concentrates of non-ferrous metals.Method of sieve and sedimentary analysis for determination of particle size