ZH
RU
ES

Linear Deviation Calculation

Linear Deviation Calculation, Total:149 items.

In the international standard classification, Linear Deviation Calculation involves: Integrated circuits. Microelectronics, Farm buildings, structures and installations, Flexible drives and transmissions, Optics and optical measurements, Linear and angular measurements, Particle size analysis. Sieving, Electrical wires and cables, Rectifiers. Convertors. Stabilized power supply, Audio, video and audiovisual engineering, Medical equipment, Quality, Natural gas, Equipment for the chemical industry, Petroleum, petroleum products and natural gas handling equipment, Quantities and units, Textile fibres, Metrology and measurement in general, Radiocommunications, Electricity. Magnetism. Electrical and magnetic measurements, Electromagnetic compatibility (EMC), Non-destructive testing, Geology. Meteorology. Hydrology, Measurement of volume, mass, density, viscosity, Protection of and in buildings, Shop fittings, Applications of information technology, Paints and varnishes, Pipeline components and pipelines, Refractories.

CU-NC, Linear Deviation Calculation

NC 02-06-1968 Representation of linear and angular desviations

CZ-CSN, Linear Deviation Calculation

CSN 01 4421-1982 Measuring of deviations of straightness
CSN 01 3136-1981 Technioal drawings. Inscription of linear and angular tolerances

Defense Logistics Agency, Linear Deviation Calculation

DLA SMD-5962-82036 REV E-2006 MICROCIRCUIT, LINEAR, LOW OFFSET OPERATIONAL AMPLIFIERS, MONOLITHIC SILICON
DLA MIL-M-38510/135 F-2008 MICROCIRCUITS, LINEAR, LOW OFFSET OPERATIONAL AMPLIFIERS, MONOLITHIC SILICON
DLA SMD-5962-82036 REV F-2012 MICROCIRCUIT, LINEAR, LOW OFFSET OPERATIONAL AMPLIFIERS, MONOLITHIC SILICON
DLA MIL-M-38510/135 G-2010 MICROCIRCUITS, LINEAR, LOW OFFSET OPERATIONAL AMPLIFIERS, MONOLITHIC SILICON
DLA SMD-5962-87738 REV D-2003 MICROCIRCUIT, LINEAR, PRECISION, LOW OFFSET, OPERATIONAL AMPLIFIER, MONOLITHIC SILICON
DLA SMD-5962-07222 REV B-2013 MICROCIRCUIT, LINEAR, WIDEBAND, DIFFERENTIAL OPERATIONAL AMPLIFIER, MONOLITHIC SILICON
DLA SMD-5962-87771 REV D-2002 MICROCIRCUIT, LINEAR, QUAD LOW OFFSET, LOW POWER, OPERATIONAL AMPLIFIER, MONOLITHIC SILICON
DLA SMD-5962-09223 REV A-2011 MICROCIRCUIT, LINEAR, PRECISION LOW NOISE, LOW INPUT BIAS CURRENT OPERATIONAL AMPLIFIER, MONOLITHIC SILICON

Shaanxi Provincial Standard of the People's Republic of China, Linear Deviation Calculation

DB6111/T 185-2022 Calculation Method of Flow Deviation in Greenhouse Drip Irrigation Project

RU-GOST R, Linear Deviation Calculation

GOST 592-1981 Chain wheels for plate link chains. Methods of calculation and construction of teeth profile. Tolerances
GOST 30893.1-2002 Basic norms of interchangeability. General tolerances. Limit deviations for linear and angular dimensions without tolerance indications
GOST 25347-2013 Basic norms of interchangeability. Geometrical product specifications. System for tolerances on linear sizes. Series of tolerances, limit deviations for holes and shafts
GOST 25346-2013 Basic norms of interchangeability. Geometrical product specifications. Code system for tolerances on linear sizes. General provisions, tolerances, deviations and fits
GOST R 55147-2012 Basic norms of interchangeability. Geometrical product specifications. System for tolerances on linear sizes. Part 2. Tolerance classes, limit deviations for holes and shafts
GOST R 50779.53-1998 Statistical methods. Acceptance sampling by variables for normal distribution. Part 1. Known standard deviation
GOST R 52857.11-2007 Vessels and apparatus. Norms and methods of strength calculation. Method of strength calculation of shells and heads according to weld misalignment, angular misalignment and shell nonroundness
GOST R 55146-2012 Basic norms of interchangeability. Geometrical product specifications. Code system for tolerances on linear sizes. Part 1. General provisions, tolerances, deviations and fits

American Society for Testing and Materials (ASTM), Linear Deviation Calculation

ASTM D2244-02 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-02e1 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-05 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM E2578-07(2012) Standard Practice for Calculation of Mean Sizes/Diameters and Standard Deviations of Particle Size Distributions
ASTM E2578-07(2018) Standard Practice for Calculation of Mean Sizes/Diameters and Standard Deviations of Particle Size Distributions
ASTM E2578-07(2022) Standard Practice for Calculation of Mean Sizes/Diameters and Standard Deviations of Particle Size Distributions
ASTM E2578-07 Standard Practice for Calculation of Mean Sizes/Diameters and Standard Deviations of Particle Size Distributions
ASTM E2446-15 Standard Practice for Manufacturing Characterization of Computed Radiography Systems
ASTM E2446-16 Standard Practice for Manufacturing Characterization of Computed Radiography Systems
ASTM C1407-98(2011)e1 Standard Practice for Calculating Areas, Volume, and Linear Change of Refractory Shapes
ASTM C1407-98(2016) Standard Practice for Calculating Areas, Volume, and Linear Change of Refractory Shapes

German Institute for Standardization, Linear Deviation Calculation

DIN-Fachbericht ISO/TR 16570:2008 Geometrical product specifications - Linear dimensioning and tolerancing: ? limit deviations - Step dimensions, dimensions, distances, angular sizes and radii (ISO/TR 16570:2004)
DIN 3991-2:1988-09 Calculation of load capacity of bevel gears without pinion offset; calculation of pitting resistance
DIN V 46454-3:2006 Zero defect winding wires - Part 3: Solderable electrically polyurethane enamelled round copper wire, class 180
DIN 60905-3:1985 Tex system; rounding of calculated linear densities
DIN EN ISO 286-2:2019-09 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010 + Cor 1:2013); German version EN ISO 286-2:2010 + AC:2013
DIN EN ISO 286-1:2019-09 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits (ISO 286-1:2010 + Cor 1:2013); German version EN ISO 286-1:2010 + AC:2013
DIN EN ISO 286-1:2019 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits (ISO 286-1:2010 + Cor 1:2013) (includes Corrigendum :2013)
DIN EN ISO 286-1:2010 Geometrical product specification (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits (ISO 286-1:2010); German version EN ISO 286-1:2010
DIN 53014-2:1994 Viscometry; capillary viscometers with circular and rectangular cross section for determination of flow curves; systematic deviations, sources and corrections
DIN EN ISO 15927-6:2007-11 Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 6: Accumulated temperature differences (degree-days) (ISO 15927-6:2007); German version EN ISO 15927-6:2007
DIN EN ISO 286-2:2019 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010 + Cor 1:2013) (includes Corrigendum :2013)
DIN 53014-2:1994-02 Viscometry; capillary viscometers with circular and rectangular cross section for determination of flow curves; systematic deviations, sources and corrections

Association Francaise de Normalisation, Linear Deviation Calculation

NF EN ISO 105-J03:2009 Textiles - Essais de solidité des teintures - Partie J03 : calcul des écarts de couleur
NF E02-100-1*NF EN ISO 286-1:2010 Geometrical product specification (GPS) - ISO code system for tolerances of linear sizes - Part 1 : basis of tolerances, deviations and fits.
NF EN ISO 286-1:2010 Spécification géométrique des produits (GPS) - Système de codification ISO pour les tolérances sur les tailles linéaires - Partie 1 : bases des tolérances, écarts et ajustements
NF ISO 22628:2002 Véhicules routiers - Recyclabilité et valorisabilité - Méthode de calcul
NF EN ISO 286-2:2010 Spécification géométrique des produits (GPS) - Système de codification ISO pour les tolérances sur les tailles linéaires - Partie 2 : tableaux des classes de tolérance normalisés et des écarts limites des alésages et des arbres
NF E02-100-2*NF EN ISO 286-2:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2 : tables of standard tolerance classes and limit deviations for holes and shafts.
NF EN ISO 15927-6:2007 Performance hygrothermique des bâtiments - Calcul et présentation des données climatiques - Partie 6 : écarts de température cumulés degrés-jour)
NF D74-005-3:1994 Regrigerated display cabinets. Part 3 : linear dimensions, areas and volumes.

Korean Agency for Technology and Standards (KATS), Linear Deviation Calculation

KS B ISO 286-1:2009 ISO system of limits and fits-Part 1:Bases of tolerances, deviations and fits
KS B ISO 286-1:2016 Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes — Part 1: Basis of tolerances, deviations and fits
KS B ISO 286-1:2014 Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes — Part 1: Basis of tolerances, deviations and fits
KS B ISO 286-2:2009 ISO system of limits and fits-Part 2:Tables of standard tolerance grades and limit deviations for holes and shafts
KS B ISO 286-2:2014 ISO system of limits and fits-Part 2:Tables of standard tolerance grades and limit deviations for holes and shafts
KS B ISO 286-1-2016(2021) Geometrical product specifications(GPS) — ISO code system for tolerances on linear sizes — Part 1: Basis of tolerances, deviations and fits
KS B ISO 286-2:2015 Geometrical product specifications(GPS) — ISO code system fortolerances on linear sizes — Part 2: Tables of standard toleranceclasses and limit deviations for holes and shafts
KS B ISO 286-2:2020 Geometrical product specifications(GPS) — ISO code system for tolerances on linear sizes — Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
KS A 3108-2002 SEQUENTIAL SAMPLING INSPECTION PLANS FOR PERCENT DEFECTIVES HAVING DESIRED OPERATING CHARACTERISTICS BY VARIABLES (STANDARD DEVIATION KNOWN)

NL-NEN, Linear Deviation Calculation

NEN 2892-1994 Flatness and parallelism of building elements surfaces. Calculation method for maximum permissible dimensional deviations, measurement and testing

IT-UNI, Linear Deviation Calculation

AT-ON, Linear Deviation Calculation

ONORM M 6745-2-1993 Calculation of load capacity of bevel gears without offset - Surface durability (pitting)
ONORM S 5240-6-1993 Image quaiity assurance in X-ray diagnostics - Constancy checking in computed tomography

British Standards Institution (BSI), Linear Deviation Calculation

BS EN ISO 286-1:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Basis of tolerances, deviations and fits
BS EN ISO 286-2:1990 Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes. Tables of standard tolerance classes and limit deviations for holes and shafts
BS EN ISO 286-2:2010 Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes. Tables of standard tolerance classes and limit deviations for holes and shafts

Professional Standard - Machinery, Linear Deviation Calculation

JB/T 5846-1991 Guidelines for calculation of characteristic curves of thyristors

未注明发布机构, Linear Deviation Calculation

BS EN ISO 286-1:2010(2013) Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes Part 1 : Basis of tolerances, deviations and fits
BS EN ISO 286-2:2010(2013) Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes Part 2 : Tables of standard tolerance classes and limit deviations for holes and shafts

Danish Standards Foundation, Linear Deviation Calculation

DS/EN ISO 286-1/AC:2013 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits
DS/EN ISO 286-1:2013 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits
DS/EN ISO 286-2:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
DS/EN ISO 286-2/AC:2013 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
DS/EN ISO 15927-6:2007 Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 6: Accumulated temperature differences (degree-days)

US-AATCC, Linear Deviation Calculation

AATCC 173-1998 CMC: Calculation of Small Color Differences for Acceptability

International Organization for Standardization (ISO), Linear Deviation Calculation

ISO 286-1:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits
ISO 286-1:2010/cor 1:2013 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits; Technical Corrigendum 1
ISO 286-2:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
ISO/TR 16570:2004 Geometrical Product Specifications (GPS) - Linear and angular dimensioning and tolerancing: ? limit specifications - Step dimensions, distances, angular sizes and radii
ISO 286-2:2010/cor 1:2013 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts; Technical Corrigendum 1

KR-KS, Linear Deviation Calculation

KS B ISO 286-1-2016 Geometrical product specifications(GPS) — ISO code system for tolerances on linear sizes — Part 1: Basis of tolerances, deviations and fits
KS B ISO 286-2-2020 Geometrical product specifications(GPS) — ISO code system for tolerances on linear sizes — Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts

国家市场监督管理总局、中国国家标准化管理委员会, Linear Deviation Calculation

GB/T 1800.1-2020 Geometrical product specifications (GPS)—ISO code system for tolerances on linear sizes—Part 1: Basis of tolerances, deviations and fits
GB/T 1800.2-2020 Geometrical product specifications (GPS)—ISO code system for tolerances on linear sizes—Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts

Professional Standard - Medicine, Linear Deviation Calculation

YY/T 1821-2022

Japanese Industrial Standards Committee (JISC), Linear Deviation Calculation

JIS B 0401-1:2016 Geometrical product specifications (GPS) -- ISO code system for tolerances on linear sizes -- Part 1: Basis of tolerances, deviations and fits
JIS B 0401-2:2016 Geometrical product specifications (GPS) -- ISO code system for tolerances on linear sizes -- Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
JIS Z 9003:1979 Single sampling inspection plans having desired operation characteristics by variables (standard deviation known)
JIS Z 9004:1983 Single sampling inspection plans having desired operating characteristics by variables (standard deviation unknown and single limit specified)
JIS K 5600-4-6:1999 Testing methods for paints -- Part 4: Visual characteristics of film -- Section 6: Colorimetry (Calculation of colour differences)

HU-MSZT, Linear Deviation Calculation

MSZ 2970/1-1984

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, Linear Deviation Calculation

ITU-R PI.842-1992 Computation of Reliability of HF Radio Systems
ITU-R P.842-2-1999 Computation of Reliability and Compatibility of HF Radio Systems
ITU-R P.842-3-2005 Computation of Reliability and Compatibility of HF Radio Systems

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Linear Deviation Calculation

GB/T 36551-2018 Calculation methods for properties of concentric lay overhead electrical stranded conductors
GB/T 27894.3-2023 Determination of the Composition of Natural Gas by Gas Chromatography and Calculation of Associated Uncertainties Part 3: Precision and Bias
GB 12282.1-1990 The best linear unbiased estimation table for life test (extreme value distribution, Weibull distribution)

Lithuanian Standards Office , Linear Deviation Calculation

LST EN ISO 286-1:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits (ISO 286-1:2010)
LST EN ISO 286-2:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010)

AENOR, Linear Deviation Calculation

UNE-EN ISO 286-1:2011 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits (ISO 286-1:2010)
UNE-EN ISO 286-2:2011 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010)

ZA-SANS, Linear Deviation Calculation

SANS 3001-PR1:2008 Civil engineering test methods Part PR1: Determination of uncertainty of measurement, repeatability, reproducibility and bias
SANS 216-4-4:2008 Specification for radio disturbance and immunity measuring apparatus and methods Part 4-4: Uncertainties, statistics and limit modelling - Statistics of complaints and a model for the calculation of limits for the protection of radio services

GOSTR, Linear Deviation Calculation

GOST 8.232-1997 State system for ensuring the uniformity of measurements. State verification schedule for means measuring the frequency deviation

International Telecommunication Union (ITU), Linear Deviation Calculation

ITU-R P.842-5-2013 Computation of reliability and compatibility of HF radio systems
ITU-R PI.842-1-1994 Computation of Reliability and Compatibility of HF Radio Systems
ITU-R P.842-4-2007
ITU-R P.842-4 SPANISH-2007 Computation of Reliability and Compatibility of HF Radio Systems
ITU-R P.842-2013 Computation of reliability and compatibility of HF radio systems

European Committee for Standardization (CEN), Linear Deviation Calculation

EN ISO 286-1:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits (ISO 286-1:2010)
EN ISO 286-2:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010)
prEN 441-3-1991 Commercial refrigerated cabinets; part 3: calculation of linear dimensions, areas and volumes

ES-UNE, Linear Deviation Calculation

UNE-EN ISO 286-1:2011/AC:2013 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits - Technical Corrigendum 1 (ISO 286-1:2010/Cor 1:2013)
UNE-EN ISO 286-2:2011/AC:2013 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts - Technical Corrigendum 1 (ISO 286-2:2010/Cor 1:2013)

American Society of Mechanical Engineers (ASME), Linear Deviation Calculation

ASME B89.4.23-2020 X-Ray Computed Tomography (CT) Performance Evaluation

American National Standards Institute （ANSI), Linear Deviation Calculation

ANSI/ASME B89.4.23-2020 X-Ray Computed Tomography (CT) Performance Evaluation

电子工业部, Linear Deviation Calculation

SJ/T 10345.1-1993 Life test table is the best linear unbiased estimation table (extreme value distribution)
SJ/T 10345.3-1993 Life test table is the best linear unbiased estimation table (normal distribution)
SJ/T 10345.4-1993 Table for life test Simple linear unbiased estimation table (normal distribution)
SJ/T 10345.2-1993 Table for life test Simple linear unbiased estimation table (extreme value distribution)

GB-REG, Linear Deviation Calculation

REG NACA-TR-865-1947 Method for calculating wing characteristics by lifting-line theory using nonlinear section lift data

Group Standards of the People's Republic of China, Linear Deviation Calculation

T/CSBME 034-2021 Specification for reliability design of X-ray Computed Tomography (CT) system

VN-TCVN, Linear Deviation Calculation

TCVN 6661-1-2000 Water quality.Calibration and evaluation of analytical methods and estimation of performance characteristics.Part 1: Statistical evaluation of the linear calibration functions

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Linear Deviation Calculation

IEEE C63.6-1988 Standard for Electromagnetic Compatibility - Open - Area Test Site Measurements - Guide for the Computation of Errors
IEEE 1394-1995 Standard for a High Performance Serial Bus (IEEE Computer Society Document)
IEEE 1394A-2000 Standard for a High Performance Serial Bus - Amendment 1 (IEEE Computer Society Document)
IEEE 1394C-2006 Standard for a High- Performance Serial Bus - Amendment 3 (IEEE Computer Society Document)
IEEE 1394.1-2004 IEEE Standard for High Performance Serial Bus Bridges (IEEE Computer Society Document)

ESDU - Engineering Sciences Data Unit, Linear Deviation Calculation

ESDU 93016-1993 PARAMETER ESTIMATION OF LINEAR SYSTEMS FROM FREQUENCY RESPONSE MEASUREMENTS (COMPUTER PROGRAM)
ESDU 93016 B-2010 Parameter estimation of linear systems from frequency response measurements (Computer program)
ESDU 93016 A-2005 Parameter estimation of linear systems from frequency response measurements (computer program.)

National Metrological Technical Specifications of the People's Republic of China, Linear Deviation Calculation

JJF(航空) 009-1983 Calculation method of main static performance index of linear pressure sensor

Professional Standard - Electron, Linear Deviation Calculation

SJ/T 11099-1996 Tables for life testing - Tables for best linear unbiased estimate (Value distribution and Weibull distribution)
SJ/T 11100-1996 Tables for life testing - Tables for simple linear unbiased estimate (Extreme-value distribution and Weibull distribution)
SJ/T 11102-1996 Tables for life testing - Tables for simple linear unbiased estimate (Normal distribution and log normal distribution)
SJ/T 11101-1996 Tables for life testing - Tables for best linear unbiased estimate (Normal distribution and log normal distribution)

Standard Association of Australia （SAA）, Linear Deviation Calculation

AS/NZS CISPR 16.4.4:2004 Specification for radio disturbance and immunity measuring apparatus and methods - Uncertainties, statistics and limit modelling - Statistics of complaints and a model for the calculation of limits
AS/NZS 3200.2.44:2000 Medical electrical equipment - Particular requirements for safety - X-ray equipment for computed tomography

API - American Petroleum Institute, Linear Deviation Calculation

API BULL 5C3-1994 Bulletin on Formulas and Calculations for Casing@ Tubing@ Drill Pipe and Line Pipe Properties
API BULL 5C3-1989 BULLETIN ON FORMULAS AND CALCULATIONS FOR CASING@ TUBING@ DRILL PIPE AND LINE PIPE PROPERTIES FIFTH EDITION

中国气象局, Linear Deviation Calculation

QX/T 528-2019 Climate Feasibility Demonstration Standards Calculation of Meteorological Parameters for Ice Resistance Design of Overhead Transmission Lines

Professional Standard - Petroleum, Linear Deviation Calculation

SY/T 6328-1997 Petroleum and natural gas industried.Formulae and calculation for casing,tubing,drill pipe and line pipe properties

International Electrotechnical Commission (IEC), Linear Deviation Calculation

CISPR TR 16-4-4:2007+AMD1:2017 CSV Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-4: Uncertainties, statistics and limit modelling - Statistics of complaints and a model for the calculation of
CISPR TR 16-4-4-2007+AMD1-2017 CSV Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-4: Uncertainties, statistics and limit modelling - Statistics of complaints and a model for the calculation of

Institute of Electrical and Electronics Engineers (IEEE), Linear Deviation Calculation

ANSI Std C63.6-1988 American National Standard Guide for electromagnetic compatibility--open-area test site measurements--guide for the computation of errors
IEEE/ANSI C63.6-1988 American National Standard Guide for electromagnetic compatibility--open-area test site measurements--guide for the computation of errors

Association of German Mechanical Engineers, Linear Deviation Calculation

DVS 2205-1 Beiblatt 11-2001