ZH
RU
ES

Initial amount Loss on ignition%

Initial amount Loss on ignition%, Total:277 items.

In the international standard classification, Initial amount Loss on ignition% involves: Jewellery, Construction materials, Protection against fire, Metalliferous minerals, Coals, Energy and heat transfer engineering in general, Products of the chemical industry, Wastes, Road vehicle systems, Non-metalliferous minerals, Internal combustion engines, Non-ferrous metals, Inorganic chemicals, Analytical chemistry, Ferrous metals, Chipless working equipment, Fluid power systems, Road vehicles in general, Reinforced plastics, Refractories, Soil quality. Pedology, Paint ingredients, Seals, glands, Ferroalloys, Continuous handling equipment, Testing of metals, MINING AND MINERALS, Air quality, Cork and cork products, Water quality.

RO-ASRO, Initial amount Loss on ignition%

STAS 7947-1967-1
STAS 8094-1968
STAS SR 4813-3-1973 Aluminium ores. Determination of loss on ingnition
STAS 9218/2-1973 ZIRCONIUM SILICATE Determination of loss on ignition
STAS 4240/3-1985 TRASS Dctcrmination of loss of ignition, fota] silicon dioxidc and reactable siiicon dioxide
STAS 166/2-1972 SILICA-ALUMINA REPRACTORIES Determination of ioss on ignition
STAS 6953-1981 SURFACE AND WASTE WATERS Determination of suspended matter, loss of ignition and calcination residues
STAS 10274 17-1975 SOLID FUELS ASH ANALYSIS Determination of the loss on ignition
STAS 8125/6-1968
STAS 5781/2-1987 DOLOMITICAL REFRACTOHY PRODUCTS Detcrmination of loss of ignition and silicon dioxide content
STAS 4605/3-1980 NON METAL-BEARING MINING PRODUCTS WITH CARBONATE CONTENT Determinntion of loss ignition
STAS 5424/2-1980 FORSTERITIC REFR?CTORY PRODUCTS Determination of loss of ignition and silicon dioxide content
STAS 5425/2-1975 CHROME AND CHROME- MAGNESITE REFRACTORIES Determination of moisture content and of loss on ignition
STAS 10387/2-1975 CALCIUM ALUMINATE CEMENTS FOR REFRACTORY CONCRETE Determination of the loss on ignition
SR ISO 320:1995 Manganese ores - Determination of sulphur content - Barium sulphate gravimetric methods and sulphur dioxide titrimetric method after combusteon
STAS SR 13303-6-1996 Chlorous mud-Determination of sulphur content-Barium sulphate gravimetric and sulphur dioxide titrimetric method after combustion

HU-MSZT, Initial amount Loss on ignition%

MSZ 21978/6-1985

RU-GOST R, Initial amount Loss on ignition%

GOST R 52950-2008 Palladium. Method for determination of mass loss after ignition
GOST 28077-1989 Manganese ores, concentrates and agglomerates. Method for determination of mass loss on ignition
GOST 27800-1993 Alumina. Method for the determination of loss of mass on ignition
GOST 23581.13-1979 Iron ores, concentrates, agglomerates and pellets. Method of determination of mass loss of ignition
GOST 19609.13-1989 Concentrated kaolin. Method for determination of mass loss onn ignition
GOST 12227.1-1976 Rodium. Gravimetric method for determination of mass loss on ignition
GOST 18262.15-1988 Titanomagnetite ores, ironvanadium concentrates, agglomerates and pellets. Method for determination of mass loss on ignition
GOST 26318.14-1984 Non-metallic ore materials. Method for determination of mass loss on ignition
GOST 12223.1-1976 Iridium. Gravimetric method for determination of mass loss on ignition
GOST 29234.13-1991 Moulding sands. Method for determination of mass loss on ignition
GOST R 54493-2011 Iridium. Rodium. Ruthenium. Method for determination of mass loss after ignition
GOST R 57042-2016 Polymer composites. Method for determination of ignition loss mass of reinforced resins
GOST 3594.15-1993 Moulding refractory clays. Method for determinations of mass loss ignition
GOST 23673.6-1979 Dolomite for glass industry. Method for the determination of mass loss on ignition
GOST 22030-1991 Products and materials, asbestos technical. Method of test for moisture, substance loss by heating and asbestos content
GOST 26482-1990 Previously reduced iron ores, concentrates, agglomerates and pellets. Method for the determination of metallic iron
GOST 13997.2-1984 Zirconium containing refractory materials and products. Methods for determination of losses of mass while heating

GOSTR, Initial amount Loss on ignition%

GOST R 52950-2018 Palladium. Method for determination of mass losses after ignition
GOST 23673.6-2020 Dolomite for glass industry. Method for determination of mass loss on ignition
GOST R 57065-2016 Resources saving. Waste treatment. Determination of loss on ignition in waste, sludge and sediments

Taiwan Provincial Standard of the People's Republic of China, Initial amount Loss on ignition%

CNS 8436-1982 Method for Determination of Ignition Loss in Feldspar
CNS 6208-1980 Determination of Loss After Heating at 900 degree C of Crude Sodium Borates for Industrial Use

ZA-SANS, Initial amount Loss on ignition%

SANS 6298:2006 Lime tests - Loss on ignition

PL-PKN, Initial amount Loss on ignition%

PN P88049-1971 Asbestes articles Determination of humidity and of mass loss after calcination
PN H04155-02-1986 Chemical analysis of silica raw materials and refractory products Determination of loss on ignation

International Organization for Standardization (ISO), Initial amount Loss on ignition%

ISO 17554:2005 Reaction to fire tests - Mass loss measurement
ISO 17554:2014 Reaction to fire tests - Mass loss measurement
ISO 11536:2015 Iron ores - Determination of loss on ignition - Gravimetric method
ISO/CD 18239-1:1976 Iron ores — Determination of loss on ignition — Part 1: Single micro sample TGA
ISO/TR 4830-3:1978 Steel — Determination of low carbon contents — Part 3: Conductimetric measurement after combustion
ISO/TR 4830-2:1978 Steel — Determination of low carbon contents — Part 2: Titrimetric method after combustion
ISO/TR 4830-4:1978 Steel; Determination of low carbon contents; Part IV : Coulometric method after combustion
ISO 7527:1985 Nickel, ferronickel and nickel alloys; Determination of sulfur content; Iodimetric titration method after induction furnace combustion
ISO 9501:1991 Metallurgical-grade fluorspar; determination of total sulfur content; iodometric method after combustion
ISO 320:1975 Title missing - Legacy paper document
ISO 320:1981 Manganese ores; Determination of sulphur content; Barium sulphate gravimetric methods and sulphur dioxide titrimetric method after combustion
ISO/TR 4830-1:1978 Steel — Determination of low carbon contents — Part 1: Manometric (low-pressure) method after combustion
ISO 745:1976 Sodium carbonate for industrial use; Determination of loss of mass and of non-volatile matter at 250 degrees C
ISO/TS 5660-4:2016 Reaction-to-fire tests - Heat release, smoke production and mass loss rate - Part 4: Measurement of low levels of heat release
ISO 7524:2020 Ferronickels — Determination of carbon content — Infrared absorption method after induction furnace combustion
ISO 7526:2020 Ferronickels — Determination of sulfur content — Infrared absorption method after induction furnace combustion
ISO 1916:1972 Disodium tetraborates for industrial use; Determination of sodium oxide and boric oxide contents and loss on ignition
ISO/TS 10719:2016 Cast irons - Determination of non-combined carbon content - lnfrared absorption method after combustion in an induction furnace
ISO/TS 10719:1994 Cast irons - Determination of non-combined carbon content - lnfrared absorption method after combustion in an induction furnace
ISO 9556:1989 Steel and iron; determination of total carbon content; infrared absorption method after combustion in an induction furnace
ISO 10694:1995 Soil quality - Determination of organic and total carbon after dry combustion (elementary analysis)
ISO/TR 10719:1994 Steel and iron - Determination of non-combined carbon content - Infrared absorption method after combustion in an induction furnace
ISO 7822:1990 Textile glass reinforced plastics; determination of void content; loss on ignition, mechanical disintegration and statistical counting methods

Korean Agency for Technology and Standards (KATS), Initial amount Loss on ignition%

KS F ISO 17554:2007 Reaction to fire tests－Mass loss measurement
KS D ISO 4830-4:2005 Steel-Determination of low carbon contents-Part 4:Coulometric method after combustion
KS D ISO 4830-4-2005(2010) Steel－Determination of low carbon contents－Part 4：Coulometric method after combustion
KS D ISO 4830-4:2013 Steel－Determination of low carbon contents－Part 4：Coulometric method after combustion
KS D ISO 7527-2012(2022) Nickel, ferronickel and nickel alloys－Determination of sulfur content－Iodimetric titration method after induction furnace combustion
KS E ISO 320-2012(2022) Manganese ores－Determination of sulphur content－Barium sulphate gravimetric methods and sulphur dioxide titrimetric method after combustion
KS E ISO 320-2012(2017) Manganese ores－Determination of sulphur content－Barium sulphate gravimetric methods and sulphur dioxide titrimetric method after combustion
KS D ISO 4935-2002(2022) Steel and iron－Determination of total sulphur content－Infrared absorption method after combustion in an induction furnace
KS D ISO 4935-2002(2017) Steel and iron－Determination of total sulphur content－Infrared absorption method after combustion in an induction furnace
KS D ISO 9556:2021 Steel and iron — Determination of total carbon content — Infrared absorption method after combustion in an induction furnace
KS I ISO 10694:2021 Soil quality — Determination of organic and total carbon after dry combustion(elementary analysis)
KS D ISO 9556-2001(2016) Steel and iron-Determination of total carbon content-Infrared absorption method after combustion in an induction furnace
KS I ISO 10694-2005(2015) Soil quality－Determination of organic and total carbon after dry combustion(elementary analysis)
KS D ISO 7527-2012(2017) Nickel, ferronickel and nickel alloys－Determination of sulfur content－Iodimetric titration method after induction furnace combustion
KS E ISO 320:2012 Manganese ores-Determination of sulphur content-Barium sulphate gravimetric methods and sulphur dioxide titrimetric method after combustion
KS M ISO 7822-2002(2017) Textile glass reinforced plastics－Determination of void content－Loss on ignition, mechanical disintegration and statistical counting methods
KS D ISO 13902:2002 Steel and iron－Determination of high sulfur content－Infrared absorption method after combustion in an induction furnace
KS D ISO 10719-2006(2016) Steel and iron－Determination of non-combined carbon content－Infrared absorption method after combustion in an induction furnace
KS D ISO 10719:2006 Steel and iron－Determination of non-combined carbon content－Infrared absorption method after combustion in an induction furnace
KS D ISO 10719:2021 Cast irons — Determination of non-combined carbon content —Infrared absorption method after combustion in an induction furnace
KS M ISO 7822:2002 Textile glass reinforced plastics－Determination of void content－Loss on ignition, mechanical disintegration and statistical counting methods
KS M ISO 7822-2002(2022) Textile glass reinforced plastics－Determination of void content－Loss on ignition, mechanical disintegration and statistical counting methods
KS D ISO 15350-2003(2018) Steel and iron－Determination of total carbone and sulfur content－Infrared absorption method after combustion in an induction furnace(routine method)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Initial amount Loss on ignition%

GB/T 34231-2017 Determination of loss on ignition for coal combustion residues
GB/T 35986-2018 Determination of ignition loss in coal gangue

BE-NBN, Initial amount Loss on ignition%

NBN T 41-001-1977 Glass reinforced plastics. Determination of the loss on ignition
NBN T 03-343-1981 Disodium tetraborates for industrial use - Determination of sodium oxideand boric oxide contents and loss on ignition
NBN T 03-294-1980 Sodium tripolyphosphate and sodium pyrophosphate for industrial use -Determination of loss on ignition

TR-TSE, Initial amount Loss on ignition%

TS 2980-1978 Determination Of Loss On Ignition In Glass Sand
TS 1821-1975 DISODIUM TETRABORATES FOR INDUSTRIAL USE - DETERMINATION OF SODIUM OXIDE AND BORIC OXIDE CONTENTS AND LOSS ON IGNITION
TS 601-1972 CHEMICAL ANALYSIS OF STEELS DETERMINATION OP TOTAL CABBON (GRAVIMETKIC METHOD APTER COMBUSTION ?N A STREAM OP OXYGEN)

未注明发布机构, Initial amount Loss on ignition%

DIN EN 60:1977 Glass reinforced plastics; determination of the loss on ignition
BS EN 15169:2007(2009) Characterization of waste — Determination of loss on ignition in waste, sludge and sediments
BS EN ISO 9556:2001(2009) Steel and iron — Determination oftotal carbon content — Infrared absorption method after combustion in an induction furnace
BS 2782-10-Method 1002:1977(1999) Methods of testing Plastics — Part 10 : Glass reinforced plastics — Method 1002 : Determination of loss on ignition

Professional Standard - Agriculture, Initial amount Loss on ignition%

GB 7876-1987 Determination of loss on ignition of forest soil
GB/T 7876-1987 Determination of loss on ignition of forest soil

Danish Standards Foundation, Initial amount Loss on ignition%

DS/EN 12879:2001 Characterization of sludges - Determination of the loss on ignition of dry mass
DS/EN 15169:2007 Characterization of waste - Determination of loss on ignition in waste, sludge and sediments
DS/EN 27527:1993 Nickel, ferronickel and nickel alloys. Determination of sulfur content. Iodimetric titration method after induction furnace combustion
DS/ISO 7527:1993 Nickel, ferronickel and nickel alloys - Determination of sulfur content - Iodimetric titration method after induction furnace combustion
DS/EN 15935:2021 Soil, waste, treated biowaste and sludge – Determination of loss on ignition
DS/ISO 4935:1993 Steel and iron - Determination of sulfur content - Infrared absorption method after combustion in an induction furnace
DS/EN ISO 9556:2001 Steel and iron - Determination of total carbon content - Infrared absorption method after combustion in an induction furnace
DS/EN 24935:1993 Steel and iron. Determination of sulfur content. Infrared absorption method after combustion in an induction furnace
DS/EN 10036:1989 Chemical analysis of ferrous materials. Determination of total carbon in steels and irons. Gravimetric method after combustion in a stream of oxygen
DS/EN 27526:1993 Nickel, ferronickel and nickel alloys. Determination of sulfur content. Infra-red absorption method after induction furnace combustion
DS/ISO 7526:1993 Nickel, ferronickel and nickel alloys - Determination of sulfur content - Infra-red absorption method after induction furnace combustion

Lithuanian Standards Office , Initial amount Loss on ignition%

LST EN 12879-2002 Characterization of sludges - Determination of the loss on ignition of dry mass
LST EN 15169-2007 Characterization of waste - Determination of loss on ignition in waste, sludge and sediments
LST EN 15935-2021 Soil, waste, treated biowaste and sludge - Determination of loss on ignition
LST EN 27527-2000 Nickel, ferronickel and nickel alloys - Determination of sulphur content - Iodometric titration method after induction furnace combustion (ISO 7527:1985)
LST EN 24935-2000 Steel and iron - Determination of sulphur content - Infrared absorption method after combustion in an induction furnace (ISO 4935:1989)
LST EN ISO 9556:2003 Steel and iron - Determination of total carbon content - Infrared absorption method after combustion in an induction furnace (ISO 9556:1989)

Professional Standard - Building Materials, Initial amount Loss on ignition%

JC/T 527-2009 Test method for loss on high temperature of friction material
JC/T 527-1993 Test method of ignition loss of friction material

American Society for Testing and Materials (ASTM), Initial amount Loss on ignition%

ASTM D7348-13 Standard Test Methods for Loss on Ignition lpar;LOIrpar; of Solid Combustion Residues
ASTM UOP954-03 Loss on Ignition (LOI) for Fresh, Regenerated, Used, and Spent Catalysts, Catalyst Supports, and Adsorbents
ASTM UOP954-11 Loss on Ignition (LOI) for Fresh, Regenerated, Used, and Spent Catalysts, Catalyst Supports, and Adsorbents

Professional Standard - Chemical Industry, Initial amount Loss on ignition%

HG/T 2956.8-2001 Ascharite ores - Determination of loss on ignition - Gravimetric method

CZ-CSN, Initial amount Loss on ignition%

CSN 65 1043-1979 Aluminium oxide. i-avimetric determination of oss on ignition.
CSN 44 1583 Cast.2-1972 Chemical analysis of bauxite Determination of loss by ignition
CSN 72 0103 Z2-1997
CSN ISO 9501:1992 Metallurgical-grade fluorspar - Determination of total sulfur content - Iodometric method after combustion
CSN 44 1800-1983 Iron ores, concentrates, aglomerates and pelets. Determination of loss of ignition. Gravimetric method.
CSN 44 1855-1989 Manganese ores, concentrates and agglomerates. Determination of mass loss in annealing
CSN 72 1565 Cast.6-1985 Testing of brick clays. Determination of the weight loss by burning, of the water intake, apparent porosity and bulk density
CSN EN 10 036-1993 Chemical analysis of ferrous materials. Determination of total carbon in steels and irons. Gravimetric method after combustion in a stream of oxygen
CSN ISO 4935:1993 Steel and iron. Determination of sulfur content. Infrared absorption method after combustion in an induction furnace

AT-ON, Initial amount Loss on ignition%

ONORM EN 60-1978 Glass reinforced plastics. Determination of the loss on ignition.
ONORM M 6295-1993 Analysis of sewage Sludge - Determination of the residue on ignition and the loss of mass on ignition
ONORM L 1079-1999 Chemical analyses of soils - Determination of soil organic matter by loss on ignition
OENORM EN 17685-1-2021 Earthworks - Chemical tests - Part 1: Determination of organic matter content by loss on ignition
ONORM EN 27527-1992 Nickel, ferronickel and nickel alloys - Determination of sulfur content - lodimetric titration method after induction furnace combustion
ONORM EN 27526-1992 Nickel, ferronickel and nickel alloys - Determination of sulfur content - Infra-red absorption method after induction furnace combustion

Professional Standard - Electron, Initial amount Loss on ignition%

SJ 3228.3-1989 Determination of loss on ignition in high purity arenaceous quartz

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Initial amount Loss on ignition%

GB/T 15057.10-1994 Limestone for chemical industry- Determination of content of loss on ignition- Gravimetric method
GB/T 4324.30-1984 Methods for chemical analysis of tungsten--The gravimetric method for the determination of loss content on ignition
GB/T 3257.21-1999 Methods for chemical analysis of bauxite--Determination of the loss on ignition--Gravimetric method
GB/T 1875-1995 Phosphate rock and concentrate--Determination of loss on ignition--Gravimetric method
GB/T 6609.2-1986 Methods for chemical analysis of aluminium oxide--The gravimetric method for the determination of loss content on ignition
GB/T 27970-2011 Test method for weight loss of non-metallic gasket materials upon exposure to elevated temperatures
GB/T 6610.2-2003 Chemical analysis methods of aluminium hydroxide-Determination of the loss of mass at 1100°C--Gravimetric method
GB/T 19421.6-2003 Test methods of crystalline layered sodium disilicate-Gravimetric methods for determination of the loss on ignition
GB/T 3885.12-1983 Methods for chemical analysis of spodumenite and lepidolite concentrates--The gravimetric method for the determination of loss on ignition
GB/T 4324.16-2012 Methods for chemical analysis of tungsten.Part 16:Determination of loss content on ignition.Gravimetric method
GB/T 223.69-2008 Iron,steel and alloy.Determination of carbon contents.Gas-volumetric method after combustion in the pipe furnace
GB/T 6609.2-2004 Chemical analysis methods and Determination of physical performance of alumina Determination of the loss of mass at 1100°C-Gravimetric method
GB/T 223.71-1997 Methods for chemical analysis of iron, steel and alloy. The gravimetric method after combustion in the pipe furnace for the determination of carbon content
GB/T 32573-2016 Determination of total carbon content of silicon powder Infrared absorption method after combustion in induction furnace
GB/T 223.69-1997 Methods for chemical analysis of iron, steel and alloy. The gas-volumetric method after combustion in the pipe furnace for the determination of carbon content
GB/T 23274.8-2009 Methods for chemical analysis of stannic oxide.Part 8:Determination of loss on ignition.Gravimetric method
GB/T 223.85-2009 Steel and iron.Determination of sulfur content.Infrared absorption method after combustion in an induction furnace
GB/T 223.83-2009 Steel and iron.Determination of high sulfur content.Infrared absorption method after combustion in an induction furnace
GB/T 223.86-2009 Steel and iron.Determination of total carbon content.Infrared absorption method after combustion in an induction furnace

ES-AENOR, Initial amount Loss on ignition%

Professional Standard - Non-ferrous Metal, Initial amount Loss on ignition%

YS/T 575.19-2006 Bauxite ore chemical analysis methods gravimetric determination of ignition loss
YS/T 534.2-2006 Aluminum Hydroxide Chemical Analysis Method Gravimetric Determination of Ignition Loss
YS/T 509.12-2006 Determination of loss on ignition by gravimetric method for chemical analysis of spodumene and lepidolite concentrates
YS/T 509.11-2008 Methods for chemical analysis of spodumene and lepidolite concentrates.Determination of loss on ignition.Gravimetric method
YS/T 534.2-2007 Chemical analysis methods of aluminium hydroxide.Part 2:Determination of the loss of mass at 1100℃.Gravimetric method

British Standards Institution (BSI), Initial amount Loss on ignition%

BS EN 17685-1:2023 Earthworks. Chemical tests - Determination of loss on ignition
PD ISO/TR 18230:2015 Iron ores. Determination of loss on ignition. Non-oxidised ores
BS 2782-10 Method 1002:1977 Methods of testing plastics. Glass reinforced plastics. Determination of loss on ignition
BS PD ISO/TS 5660-4:2016 Reaction-to-fire tests. Heat release, smoke production and mass loss rate. Measurement of low levels of heat release
21/30437192 DC BS EN 17685-1. Earthworks. Chemical tests. Part 1. Determination of organic matter content by loss on ignition
BS EN 15169:2007 Characterization of waste - Determination of loss on ignition in waste, sludge and sediments
BS EN 15935:2021 Soil, waste, treated biowaste and sludge. Determination of loss on ignition
BS EN ISO 7623:1996 Steel cord conveyor belts - Cord-to-coating bond test - Initial test and after thermal treatment
BS EN ISO 7623:2015 Steel cord conveyor belts. Cord-to-coating bond test. Initial test and after thermal treatment
BS EN ISO 7526:2020 Tracked Changes. Ferronickels. Determination of sulfur content. Infrared absorption method after induction furnace combustion
BS EN ISO 15350:2001 Steel and iron. Determination of total carbon and sulfur content. Infrared absorption method after combustion in an induction furnace (routine method)
BS EN ISO 15350:2010 Steel and iron - Determination of total carbon and sulfur content - Infrared absorption method after combustion in an induction furnace (routine method)
BS ISO 5660-1:2015 Reaction-to-fire tests. Heat release, smoke production and mass loss rate. Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement)
20/30409128 DC BS EN 15935. Sludge, treated biowaste, soil and waste. Determination of loss on ignition
BS EN 15267-2:2009 Air quality - Certification of automated measuring systems - Part 2: Initial assessment of the AMS manufacturer's quality management system and post certification surveillance for the manufacturing process
BS PD ISO/TS 10719:2016 Cast irons. Determination of non-combined carbon content. Infrared absorption method after combustion in an induction furnace
PD ISO/TS 10719:2016 Cast irons. Determination of non-combined carbon content. Infrared absorption method after combustion in an induction furnace
BS ISO 2385:2020 Packed cork. Virgin cork, raw reproduction cork, burnt cork, boiled reproduction cork and raw cork waste. Sampling to determine moisture content
BS EN ISO 9556:2001 Steel and iron - Determination of total carbon content - Infrared absorption method after combustion in an induction furnace
BS EN ISO 15349-2:2003 Unalloyed steel - Determination of low carbon content - Infrared absorption method after combustion in an induction furnace (with preheating)
BS 7755-3.8:1995 Soil quality. Chemical methods. Determination of organic and total carbon after dry combustion (elementary analysis)
DD ENV 12260-1996 Water quality. Determination of nitrogen. Determination of bound nitrogen, after combustion and oxidation to nitrogen dioxide, using chemiluminescence detection
BS ISO 2386:2019 Tracked Changes. Packed cork. Virgin cork, raw reproduction cork, burnt cork, boiled reproduction cork and raw cork waste. Determination of moisture content
20/30397086 DC BS ISO 2385. Packed cork. Virgin cork, raw reproduction cork, burnt cork, boiled reproduction cork and raw cork waste. Sampling to determine moisture content

NL-NEN, Initial amount Loss on ignition%

NEN 5754-1992 Soil - Determination of organic matter content in soil as loss-on-ignition
NEN 6620-1986 Waste water and sludge Determination of the total residue on evaporation after drying and after ignition Gravimetric method
NEN 6621-1988 Waste water and sludge - Determination of the content of suspended solids after drying and after ignition - Gravimetric method
NEN 2481-1989 Combustion products of solid mineral fuels -Determination of the sulfur content in powder coal ash after combustion in a furnace -Titrimetric method
NEN 6206-1978 Chemical analysis of iron and steel - Volumetric determination of the carbon content in iron and steel, after combustion in a high frequency furnace or a resistance furnace

The American Road & Transportation Builders Association, Initial amount Loss on ignition%

AASHTO T 267-1986 Standard Method of Test for Determination of Organic Content in Soils by Loss on Ignition

SE-SIS, Initial amount Loss on ignition%

SIS SS 02 71 05-1990 Geotechnical tests — Organic content — Ignition loss method
SIS SS-EN 24 935-1992 Steel and iron — Determination of sulfur content — Infrared absorption method after combustion in an induction furnace
SIS SS-EN 27 527-1992 Nickel, ferronickel and nickel alloys — Determination of sulfur content — lodimetric titration method after induction furnace combustion
SIS SS-EN 27 526-1992 Nickel, ferronickel and nickel alloys — Determination of sulfur content — Infra- red absorption method after induction furnace combustion

工业和信息化部, Initial amount Loss on ignition%

YS/T 1173-2017 Methods for chemical analysis of copper waste used in smelting - Determination of loss on ignition - Weighing method
YS/T 1161.2-2016 Methods of analysis for pseudoboehmite Part 2: Gravimetric method for determination of loss on ignition
YS/T 1065.3-2015 Methods for determination of physical properties of zeolites Part 3: Gravimetric method for determination of loss on ignition
SJ/T 3328.3-2016 High purity quartz sand for electronic products Part 3 Determination of loss on ignition

German Institute for Standardization, Initial amount Loss on ignition%

DIN ISO 10694:1996 Soil quality - Determination of organic and total carbon after dry combustion (elementary analysis) (ISO 10694:1995)
DIN EN 17685-1:2023-04 Earthworks - Chemical tests - Part 1: Determination of loss on ignition; German version EN 17685-1:2023
DIN EN 1744-7:2012-05 Tests for chemical properties of aggregates - Part 7: Determination of loss of ignition of Municipal Incinerator Bottom Ash Aggregate (MIBA Aggregate); German version EN 1744-7:2012
DIN EN 15935:2021-10 Soil, waste, treated biowaste and sludge - Determination of loss on ignition; German version EN 15935:2021
DIN EN ISO 9556:2002-04 Steel and iron - Determination of total carbon content - Infrared absorption method after combustion in an induction furnace (ISO 9556:1989); German version EN ISO 9556:2001
DIN EN 27527:1992-02 Nickel, ferronickel and nickel alloys; determination of sulfur content; iodimetric titration method after induction furnace combustion (ISO 7527:1985); german version EN 27527:1991
DIN EN ISO 21789:2020-06 Ferronickels - Determination of sulfur content - Infrared absorption method after induction furnace combustion (ISO 7526:2020); German version EN ISO 7526:2020
DIN EN ISO 7526:2020-06 Ferronickels - Determination of sulfur content - Infrared absorption method after induction furnace combustion (ISO 7526:2020); German version EN ISO 7526:2020
DIN EN 24935:1992 Determination of sulfur content of steel and iron by infrared absorption spectroscopy after combustion in an induction furnace (ISO 4935:1989); german version EN 24935:1991
DIN EN ISO 7526:2020 Ferronickels - Determination of sulfur content - Infrared absorption method after induction furnace combustion (ISO 7526:2020)
DIN EN ISO 7822:2000 Textile glass reinforced plastics - Determination of void content - Loss on ignition, mechanical disintegration and statistical counting methods (ISO 7822:1990); German version EN ISO 7822:1999
DIN EN 15935:2021 Soil, waste, treated biowaste and sludge - Determination of loss on ignition; German version EN 15935:2021

Association Francaise de Normalisation, Initial amount Loss on ignition%

NF EN ISO 8130-7:2019 Poudres pour revêtement - Partie 7 : détermination de la perte de masse à la cuisson
NF EN 17685-1:2023 Terrassements - Essais chimiques - Partie 1 : détermination de la perte au feu
NF EN 1744-7:2012 Essais pour déterminer les propriétés chimiques des granulats - Partie 7 : détermination de la perte au feu des mâchefers d'incinération d'ordures ménagères (MIOM)
NF A10-622*NF EN 27527:1992 Nickel, ferronickel and nickel alloys. Determination of sulfur content. Iodimetric titration method after induction furnace combustion.
NF X31-409*NF ISO 10694:1995 Soil quality. Determination of organic and total carbon after dry combustion (elementary analysis).
NF EN ISO 7526:2020 Ferronickels - Détermination de la teneur en soufre - Méthode par absorption dans l'infrarouge après combustion dans un four à induction
NF X31-039*NF EN 15935:2021 Soil, waste, treated biowaste and sludge - Determination of loss on ignition
NF EN 15935:2021 Sols, déchets, biodéchets traités et boues - Détermination de la perte au feu
NF A54-106*NF ISO 7524:2020 Ferronickels - Determination of carbon content - Infrared absorption method after induction furnace combustion
NF A10-621*NF EN ISO 7526:2020 Ferronickels - Determination of sulfur content - Infrared absorption method after induction furnace combustion
NF ISO 10694:1995 Qualité du sol - Dosage du carbone organique et du carbone total après combustion sèche (analyse élémentaire)
NF A06-367*NF EN 24935:1992 Steel and iron. Determination of sulfur content. Infrared absorption method after combustion in an induction furnace.
NF EN 27527:1992 Nickel, ferro-nickel et alliages de nickel - Dosage du soufre - Méthode par titration iodométrique après combustion dans un four à induction.
NF ISO 7524:2020 Ferronickels - Détermination de la teneur en carbone - Méthode par absorption dans l'infrarouge après combustion dans un four à induction
XP A06-560*XP ISO/TS 10719:2021 Cast irons - Determination of non-combined carbon content - lnfrared absorption method after combustion in an induction furnace
NF A06-391:1988 STEEL AND IRON. DETERMINATION OF TOTAL CARBON CONTENT. INFRARED ABSORPTION METHOD AFTER COMBUSTION IN AN INDUCTION FURNACE.
NF EN 14546:2005 Produits alimentaires - Détermination des éléments traces - Détermination de l'arsenic total par spectrométrie d'absorption atomique par génération d'hydrures (SAAGH) après calcination par voie sèche
NF A06-558*NF EN ISO 15350:2010 Steel and iron - Determination of total carbon and sulfur content - Infrared absorption method after combustion in an induction furnace (routine method).
NF A06-726:1992 Analyse chimique du cuivre - Dosage du soufre - Méthode par absorption dans l'infrarouge après combustion dans un four à induction.

ES-UNE, Initial amount Loss on ignition%

UNE-EN 17685-1:2023 Earthworks - Chemical tests - Part 1: Determination of loss on ignition
UNE-EN 15935:2021 Soil, waste, treated biowaste and sludge - Determination of loss on ignition (Endorsed by Asociación Española de Normalización in September of 2021.)
UNE-EN ISO 7526:2020 Ferronickels - Determination of sulfur content - Infrared absorption method after induction furnace combustion (ISO 7526:2020) (Endorsed by Asociación Española de Normalización in May of 2020.)

Professional Standard - Forestry, Initial amount Loss on ignition%

LY/T 1253-1999 Determination of mineral total elements(silica,iron,aluminium,titanium,manganese,calcium,magnesium,phosphorus)ignition loss in forest soil

国家市场监督管理总局、中国国家标准化管理委员会, Initial amount Loss on ignition%

GB/T 14506.34-2019 Methods for chemical analysis of silicate rocks—Part 34 :Determination of loss on ignition—Gravimetric method

European Committee for Standardization (CEN), Initial amount Loss on ignition%

prEN 17685-1-2021 Earthworks - Chemical tests - Part 1: Determination of organic matter content by loss on ignition
EN 27527:1991 Nickel, Ferronickel and Nickel Alloys - Determination of Sulfur Content - Iodimetric Titration Method After Induction Furnace Combustion
EN ISO 7526:2020 Ferronickels - Determination of sulfur content - Infrared absorption method after induction furnace combustion (ISO 7526:2020)
EN ISO 15350:2010 Steel and iron - Determination of total carbon and sulfur content - Infrared absorption method after combustion in an induction furnace (routine method) (ISO 15350:2000)
EN 24935:1991 Steel and iron - Determination of sulphur content - Infrared absorption method after combustion in an induction furnace (ISO 4935:1989)
EN 10036:1989 Chemical Analysis of Ferrous Materials Determination of Total Carbon in Steels and Irons Gravimetric After Combustion in a Stream of Oxygen
EN ISO 7822:1999 Textile Glass Reinforced Plastics - Determination of Void Content - Loss on Ignition, Mechanical Disintegration and Statistical Counting Methods
EN ISO 15349-2:2021 Unalloyed steel - Determination of low carbon content - Part 2: Infrared absorption method after combustion in an induction furnace (with preheating) (ISO 15349-2:2021)

AENOR, Initial amount Loss on ignition%

UNE-EN 15169:2007 Characterization of waste - Determination of loss on ignition in waste, sludge and sediments
UNE 77321:2003 Soil quality. Determination of organic and total carbon after dry combustion (elementary analysis).
UNE-EN 27527:1992 NICKEL, FERRONICKEL AND NICKEL ALLOYS. DETERMINATION OF SULFUR CONTENT. IODIMETRIC TITRATION METHOD AFTER INDUCTION FURNACE COMBUSTION . (ISO 7527:1985)
UNE-EN ISO 9556:2002 Steel and iron - Determination of total carbon content - Infrared absorption method after combustion in an induction furnace. (ISO 9556:1989)

Professional Standard - Commodity Inspection, Initial amount Loss on ignition%

SN/T 4005-2013 Test methods for testing the burning behaviour of resilient filling materials used in furniture.Loss in mass

YU-JUS, Initial amount Loss on ignition%

JUS C.A1.704-1987 Nickel metal, feronickel and nickel alloys. Determination of sulfur content. lodimetric titration method after induction furnace combustion
JUS C.A1.703-1987 Nickel metal, ferronickel and nickel alloys. Determination of carbon content. Infra-red absorption met-hod after induction fumace combustion

CH-SNV, Initial amount Loss on ignition%

SN EN 15935-2021 Soil, waste, treated biowaste and sludge - Determination of loss on ignition

IT-UNI, Initial amount Loss on ignition%

UNI EN 15935-2021 Soil, waste, treated biowaste and sludge - Determination of loss on ignition

中华人民共和国工业和信息化部, Initial amount Loss on ignition%

SJ/T 3228.3-2016 High purity arenaceous quartz for used in electronics Part 3: Determining loss on ijgnijition

Japanese Industrial Standards Committee (JISC), Initial amount Loss on ignition%

JIS G 1211-2:2011 Iron and steel -- Determination of carbon content -- Part 2: Gas volumetric method after combustion
JIS G 1211-3:2011 Iron and steel -- Determination of carbon content -- Part 3: Infrared absorption method after combustion
JIS G 1211-3 AMD 1:2013 Iron and steel.Determination of carbon content.Part 3: Infrared absorption method after combustion (Amendment 1)
JIS G 1211-3 AMD 2:2017 Iron and steel -- Determination of carbon content -- Part 3: Infrared absorption method after combustion (Amendment 2)
JIS G 1215-4:2010 Iron and steel -- Determination of sulfur content -- Part 4: Infrared absorption method after combustion in an induction furnace

KR-KS, Initial amount Loss on ignition%

KS D ISO 9556-2021 Steel and iron — Determination of total carbon content — Infrared absorption method after combustion in an induction furnace
KS I ISO 10694-2021 Soil quality — Determination of organic and total carbon after dry combustion(elementary analysis)
KS F 2104-2013(2023) Standard test method of organic matter contents in soils by ignition loss
KS D ISO 7524-2022 Ferronickels — Determination of carbon content — Infrared absorption method after induction furnace combustion
KS D ISO 7526-2022 Ferronickels — Determination of sulfur content — Infrared absorption method after induction furnace combustion
KS D ISO 10719-2021 Cast irons — Determination of non-combined carbon content —Infrared absorption method after combustion in an induction furnace
KS D ISO 15350-2003(2023) Steel and iron－Determination of total carbone and sulfur content－Infrared absorption method after combustion in an induction furnace(routine method)

AASHTO - American Association of State Highway and Transportation Officials, Initial amount Loss on ignition%

T267-1986 Standard Method of Test for Determination of Organic Content in Soils by Loss on Ignition
T 267-1986 Standard Method of Test for Determination of Organic Content in Soils by Loss on Ignition

VN-TCVN, Initial amount Loss on ignition%

TCVN 6642-2000 Soil quality.Determination of organic and total carbon after dry combustion (elementary analysis)

Group Standards of the People's Republic of China, Initial amount Loss on ignition%

T/CSTM 00013-2019 Cast iron—Determination of non-combined carbon content—infrared absorption method after combustion in an induction furnace

Universal Oil Products Company (UOP), Initial amount Loss on ignition%

UOP 954-2011 Loss on Ignition (LOI) for Fresh, Regenerated, Used, and Spent Catalysts, Catalyst Supports, and Adsorbents