ZH
RU
ES
large plastic model
large plastic model, Total:500 items.
In the international standard classification, large plastic model involves: Chipless working equipment, Equipment for the rubber and plastics industries, Vocabularies, Equipment for the chemical industry, Fasteners, Cans. Tins. Tubes, Reinforced plastics, Plastics, Materials for aerospace construction, Farming and forestry, Seals, glands, Components for aerospace construction, Packaging machinery, Lubrication systems, Geology. Meteorology. Hydrology, Air quality, Barrels. Drums. Canisters, Insulating materials, Packaging materials and accessories, Cellular materials, Kitchen equipment, Products of non-ferrous metals, Non-ferrous metals, Machine tool systems, Elements of buildings, Woodworking equipment, Rubber and plastics products, Terminology (principles and coordination), Aircraft and space vehicles in general, Fertilizers, Pipeline components and pipelines, Textile fibres, Raw materials for rubber and plastics, Lifting equipment, Astronomy. Geodesy. Geography, Springs, Fruits. Vegetables, Pumps, Welding, brazing and soldering, Water quality, Medical sciences and health care facilities in general, Dentistry, Manufacturing forming processes, Gears, Applications of information technology, Testing of metals, Rubber, Cutting tools, Medical equipment, Information technology (IT) in general.
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, large plastic model
- GB/T 12555.1-12555.15-1990 Injection mould for plastic large-size mould bases
- GB/T 12555.4-1990 Injection mould for plastic large-size mould bases--Mould plates
- GB/T 12555.14-1990 Injection mould for plastic large-size mould bases--Liner bushes
- GB/T 12555.3-1990 Injection mould for plastic large-size mould bases--Elamping plates
- GB/T 12555.6-1990 Injection mould for plastic large-size mould bases--Ejector plates
- GB/T 12555.7-1990 Injection mould for plastic large-size mould bases--Spacer plates
- GB/T 12555.1-1990 Injection mould for plastic large-size mould bases --Standard mould bases
- GB/T 12555.11-1990 Injection mould for plastic large-size mould bases--Straight guide bushes
- GB/T 12555.13-1990 Injection mould for plastic large-size mould bases--Return pins
- GB/T 12555.15-1990 Injection mould for plastic large-size mould bases--Stop plates
- GB/T 12555.5-1990 Injection mould for plastic large-size mould bases--Support plates
- GB/T 12555.2-1990 Injection mould for plastic large-size mould bases--Specification
- GB/T 12555.12-1990 Injection mould for plastic large-size mould bases--Guide bushes with head
- GB/T 12555.8-1990 Injection mould for plastic large-size mould bases--Guide pillars with head
- GB/T 12555.9-1990 Injection mould for plastic large-size mould bases--Guide pillars with shoulder
- GB/T 12555.10-1990 Injection mould for plastic large-size mould bases--Guide pins for ejector plater
- GB/T 8846-2005 Terminology of moulds for plastics
- GB/T 12556.1-1990 Injection mould for plastic--Medium size and small size mould bases
- GB/T 8846-1988 Terminology of mould for plastics
- GB/T 15568-1995 Sheet moulding compoumds (SMC) for general purposes
- GB/T 15568-2008 General Purpose Sheet Molding Compound (SMC)
- GB/T 12556.2-1990 Injection mould for plastic--Specifications for medium size and small size mould bases
- GB/T 22470-2008 General requirements for environmentally friendly moulding compounds for electrical purpose
- GB/T 50989-2014 Technical code for buried twisting plastic pipeline engineering
- GB/T 25941-2010 Plastic vacuum forming machine
- GB/T 38533-2020 Injection moulding machines for rubber and plastics—Mould fixing and connection dimensions
- GB/T 7190.2-1997 Glass fiber reinforced plastic cooling tower--Part 2: Large glass fiber reinforced plastic cooling tower
- GB/T 7190.2-2008 Glass fiber reinforced plastic cooling tower.Part2:Large glass fiber reinforced plastic cooling tower
- GB/T 11880-1989 Large die-blocks used for die-forging hammer and mechanical forging press--Specification
- GB/T 11880-2008 Specification of large die-blocks used for die-forging hammer and mechanical forging press
Professional Standard - Aerospace, large plastic model
- QJ 871.1-1984 Plastic Extrusion Mold Round Vertical Parting Plastic Compression Mold
- QJ 871.2-1984 Plastic Extrusion Mold Rectangular Vertical Parting Plastic Compression Mold
- QJ 874.2-1984 Plastic Extrusion Mold Cavity Plate
- QJ 874.3-1984 Plastic Extrusion Mold Cavity Plate
- QJ 874.4-1984 Plastic Extrusion Mold Cavity Plate
- QJ 874.5-1984 Plastic Extrusion Mold Cavity Plate
- QJ 874.6-1984 Plastic Extrusion Mold Cavity Plate
- QJ 874.7-1984 Plastic Extrusion Mold Cavity Plate
- QJ 874.8-1984 Plastic Extrusion Mold Cavity Plate
- QJ 873.1-1984 Plastic Extrusion Mold Cavity Blocks
- QJ 874.1-1984 Plastic Extrusion Mold Cavity Plate
- QJ 873.2-1984 Plastic Extrusion Mold Cavity Blocks
- QJ 2531.1-1993 Type A Upper Die of Large Combination Bending Die Components
- QJ 2531.2-1993 B-type upper mold of large combined bending mold element
- QJ 842.1-1984 Plastic Injection Mold Type I Sprue Injection Mold Base
- QJ 842.2-1984 Plastic Injection Mold Type II Sprue Injection Mold Base
- QJ 842.3-1984 Plastic Injection Mold Type III Sprue Injection Mold Base
- QJ 842.4-1984 Plastic Injection Mold Type IV Sprue Injection Mold Base
- QJ 842.5-1984 Plastic Injection Mold Type V Sprue Injection Mold Base
- QJ 842.6-1984 Plastic Injection Mold VI Type Sprue Injection Mold Base
- QJ 843.1-1984 Plastic Injection Mold Type I Point Sprue Injection Mold Base
- QJ 843.2-1984 Plastic injection mold type Ⅱ point runner injection mold base
- QJ 843.5-1984 Plastic Injection Mold Type V Point Sprue Injection Mold Base
- QJ 843.7-1984 Plastic injection mold type VII point runner injection mold base
- QJ 843.8-1984 Plastic injection mold type Ⅷ point runner injection mold base
- QJ 843.3-1984 Plastic injection mold type Ⅲ point sprue injection mold base
- QJ 843.4-1984 Plastic Injection Mold Type IV Point Sprue Injection Mold Base
- QJ 843.6-1984 Plastic injection mold type Ⅵ point sprue injection mold base
- QJ 2531.4-1993 A-shaped top plate of large combined bending mold element
- QJ 2531.5-1993 B-type top plate of large combined bending die element
- QJ 2529.6-1993 Large combined bending die element A-type angle iron
- QJ 2529.7-1993 B-type angle iron of large combined bending die element
- QJ 2531.3-1993 Lower die for large combined bending die components
- QJ 890.2-1984 Plastic Extrusion Mold Threaded Core (for Fixing Inserts)
- QJ 890.4-1984 Plastic Extrusion Mold Threaded Core (for Fixing Inserts)
- QJ 890.5-1984 Plastic Extrusion Mold Threaded Core (for Fixing Inserts)
- QJ 2514.8A-2007 Parts of cold-punching dies (Part 8) Large / medium universal die sets
- QJ 2529.8-1993 A-type positioning plate for large combined bending die components
- QJ 2529.9-1993 B-type positioning plate for large combined bending die components
- QJ 773.28-1983 Large 180° circular arc punch for small combination punching die
- QJ 773.29-1983 Small Combination Die Large 180° Arc Die
- QJ 890.1-1984 Combination threaded core for plastic extrusion die (for fixing inserts)
- QJ 2529.1-1993 Flat key of large combined bending die element
- QJ 2530.2-1993 Large combined bending die element connecting plate
- QJ 2530.3-1993 Ejector rod of large combined bending die element
- QJ 2530.1-1993 Large Combination Bending Die Element Screws
- QJ 2432-1993 Modal test method for large vehicles
- QJ 2529.5-1993 Large combined bending die element pressing block
- QJ 2527.4-1993 D-shaped lower groove base part of large combined bending die element
- QJ 2527.5-1993 E-type lower groove base part of large combined bending die element
- QJ 2527.7-1993 B-type upper groove base part of large combined bending die element
- QJ 2527.8-1993 C-type upper groove base part of large combined bending die element
- QJ 2527.9-1993 D-type upper groove base part of large combined bending die element
- QJ 2527.10-1993 Large-scale combined bending die element E-shaped upper groove basic part
- QJ 2528.1-1993 A-type rectangular short support for large combined bending die element
- QJ 2528.2-1993 B-type rectangular short support for large combined bending die element
- QJ 2528.4-1993 C-type rectangular short support for large combined bending die element
- QJ 2528.5-1993 D-type rectangular short support for large combined bending die element
- QJ 2528.6-1993 E-type Rectangular Short Support for Large Combined Bending Die Components
- QJ 2528.7-1993 F-Type Rectangular Short Support for Large Combination Bending Die Components
- QJ 2528.9-1993 A-type rectangular long support of large combined bending die element
- QJ 2528.10-1993 B-type rectangular long support of large combined bending die element
- QJ 2528.11-1993 C-type rectangular long support of large combined bending die element
- QJ 2528.12-1993 D-type rectangular long support of large combined bending die element
- QJ 2528.13-1993 E-type rectangular long support for large combined bending die element
- QJ 2528.14-1993 F-Type Rectangular Long Support of Large Combination Bending Die Components
- QJ 2528.15-1993 G-Type Rectangular Long Support of Large Combination Bending Die Components
- QJ 2527.1-1993 Type A Lower Groove Basic Parts of Large Combination Bending Die Elements
- QJ 2527.2-1993 B-type lower groove base part of large combined bending die element
- QJ 2527.3-1993 C-shaped lower groove base part of large combined bending die element
- QJ 2527.6-1993 Type A Upper Groove Basic Parts of Large Combination Bending Die Elements
- QJ 2529.3-1993 Inclined Pad Blocks for Large Combination Bending Die Elements
- QJ 2528.18-1993 Large combined bending die element thick backing plate
- QJ 2528.20-1993 Thin backing plate for large combined bending die components
- QJ 2529.2-1993 Adjustable leveling key for large combined bending die elements
- QJ 2496-1993 Technical conditions for large combined bending die components
- QJ 2528.19-1993 Medium-thick backing plate for large combined bending die components
- QJ 776.17-1983 Small Combination Die Pusher Plate
Gansu Provincial Standard of the People's Republic of China, large plastic model
Taiwan Provincial Standard of the People's Republic of China, large plastic model
Japanese Industrial Standards Committee (JISC), large plastic model
Group Standards of the People's Republic of China, large plastic model
Professional Standard - Machinery, large plastic model
German Institute for Standardization, large plastic model
- DIN 34816:1999 Plastic plain washers - Large series
- DIN 16948-2:1975 Glass fibre reinforced reaktion moulding materials in the moulded state; properties of special moulding materials
- DIN 55471-2:1987 Cellular polystyrene for packaging; design of moulded packaging
- DIN EN 1842:1997-11 Plastics - Thermoset moulding compounds (SMC - BMC) - Determination of compression moulding shrinkage; German version EN 1842:1997
- DIN EN ISO 10724-2:2000 Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 2: Small plates (ISO 10724-2:1998); German version EN ISO 10724-2:2000
- DIN 16948-1:1975 Glass fibre reinforced reaktion moulding materials in the moulded state; classification and designation
- DIN ISO 15600:2012-07 Tools for moulding - Thermal insulating sheets for injection moulds (ISO 15600:2000)
- DIN 7742-1:1988-01 Plastic moulding materials; cellulose ester(CA, CP, CAB) thermoplastic moulding materials; classification and designation
- DIN EN ISO 3671:1998-10 Plastics - Aminoplastic moulding materials - Determination of volatile matter (ISO 3671:1976); German version EN ISO 3671:1998 / Note: To be replaced by DIN EN ISO 3671 (2023-01).
- DIN EN ISO 10724-1:2002-04 Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 1: General principles and moulding of multipurpose test specimens (ISO 10724-1:1998); German version EN ISO 10724-1:2001
- DIN 16944:1988 Glass fibre reinforced reaction resin moulding materials; test methods
- DIN EN ISO 293:2023-06 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2023); German version EN ISO 293:2023
- DIN EN 12576:1998-09 Plastics - Fibre reinforced composites - Preparation of compression moulded test plates of SMC, BMC and DMC; German version EN 12576:1998
- DIN 53477:1992 Testing of plastics; determination of particle size distribution of moulding materials by dry sieving analysis
- DIN 53477:2018 Testing of plastics - Determination of particle size distribution of moulding materials by dry sieving analysis
- DIN EN ISO 10724-2:2000-12 Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 2: Small plates (ISO 10724-2:1998); German version EN ISO 10724-2:2000
International Organization for Standardization (ISO), large plastic model
- ISO 10724:1994 Plastics - Thermosetting moulding materials - Injection moulding of multipurpose test specimens
- ISO 10724-1:1998 Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 1: General principles and moulding of multipurpose test specimens
- ISO 8328:1989 Plastics; amorphous thermoplastic moulding materials; determination of maximum reversion
- ISO 17771:2003 Plastics - Thermoset moulding compounds - Determination of the degree of fibre wet out in SMC
- ISO 10724-2:1998 Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 2: Small plates
- ISO/DIS 3671 Plastics — Aminoplastic moulding materials — Determination of volatile matter
- ISO 9969:1994 Thermoplastics pipes; determination of ring stiffness
- ISO 5834-2:1998 Implants for surgery - Ultra-high molecular weight polyethylene - Part 2 : Moulded forms
- ISO 5834-2:2006 Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 2: Moulded forms
Danish Standards Foundation, large plastic model
- DS/EN ISO 293:2005 Plastics - Compression moulding of test specimens of thermoplastic materials
- DS/EN ISO 295:2004 Plastics - Compression moulding of test specimens of thermosetting materials
- DS/EN 14598-3:2005 Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements
- DS/EN 1842:1998 Plastics - Thermoset moulding compounds (SMC-BMC) - Determination of compression moulding shrinkage
- DS/EN 13677-3:2003 Reinforced thermoplastic moulding compounds - Specification for GMT - Part 3: Specific requirements
- DS/EN ISO 10724-2:2000 Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 2: Small plates
- DS/EN ISO 10724-1:2001 Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 1: General principles and moulding of multipurpose test specimens
- DS/EN ISO 3671:1999 Plastics - Aminoplastic moulding materials - Determination of volatile matter
- DS/EN 289:1993 Rubber and plastics machinery. Compression and transfer moulding presses. Safety requirements for the design
- DS/EN 13677-2:2003 Reinforced thermoplastic moulding compounds - Specification for GMT - Part 2: Methods of test and general requirements
- DS/EN ISO 294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage
- DS/EN 802:1995 Plastics piping and ducting systems - Injection-moulded thermoplastics fittings for pressure piping systems - Test method for maximum deformation by crushing
RU-GOST R, large plastic model
- GOST 19505-1986 Plastic casting patterns and core boxes. Technical requirements
- GOST R 56282-2014 Aluminum alloy extruded large solid sections. Specifications
- GOST 11785-1974 Finishing trowels for large foundry moulds and cores. Design
- GOST 25645.154-1990 Earth upper atmosphere. Chemical composition model
- GOST 33351-2015 Polymer composites. Production of samples for testing by injection moulding of long-fibre moulding compounds
Professional Standard - Aviation, large plastic model
- HB 2101-1975 Round Vertical Parting Plastic Die
- HB 2103-1975 Rectangular vertical parting plastic stamper
- HB 2102-1975 Round Vertical Parting Plastic Die
- HB/Z 350-2001 Composite resin transfer molding (injection) molding process
- HB/Z 149-1989 Plastic injection mold standard mold base structure type, naming, specification, size series
- HB/Z 349-2001 Heat-resistant thermoplastic injection molding process
- HB 6841-1993 Technical requirements and evaluation methods of plastic mold cavity surface roughness samples and plastic samples
- HB 6828.1-1993 Typical combination of cold stamping die Type A typical combination of spring pressure unloading
- HB 6828.2-1993 Typical combination of cold stamping die Spring pressure discharge type B typical combination
- HB 6828.3-1993 Typical combination of cold stamping die Typical combination of fixed unloading
- HB/Z 342-2000 Injection molding process of thermoplastic engineering plastics for aviation
工业和信息化部/国家能源局, large plastic model
Society of Automotive Engineers (SAE), large plastic model
- SAE AMS3645C-1991 Polychlorotrifluoroethylene (PCTFE), Compression Molded Heavy Sections, Unplasticized
- SAE AMS3645D-2012 Polychlorotrifluoroethylene, Compression Molded-Heavy Sections, Unplasticized
- SAE AS5728-2009 Packing, Preformed, O-Ring Molded from AMS 7268 Material
- SAE AS5729-2011 O-RING MOLDED FROM AMS7379 (FLUOROCARBON) MATERIAL
- SAE AIR1397A-2013 Clamp Material, Injection Molded
- SAE AIR1397-1993 CLAMP MATERIAL, INJECTION MOLDED
- SAE AIR1397B-2019 Clamp Material, Injection Molded
- SAE AMS3617E-2014 Polyamide Type 6-6@ Plastic Moldings and Extrusions
- SAE AMS3617F-2019 Polyamide Type 6-6, Plastic Moldings and Extrusions
Korean Agency for Technology and Standards (KATS), large plastic model
- KS B 4078-1972 Dimensions related to molds for plastics compression molding machines and plastics transfer molding machines
- KS B 4078-1986 Dimensions related to molds for plastics compression molding machines and plastics transfer molding machines
- KS B 4078-2013 Dimensions related to molds for plastics compression molding machines and plastics transfer molding machines
- KS B 4077-1972(2011) Dimensions relating to Molds for Plastics Injection Molding Machines
- KS B 4077-1972 Dimensions relating to Molds for Plastics Injection Molding Machines
- KS B 4077-1999 Dimensions relating to Molds for Plastics Injection Molding Machines
- KS B 4077-1981 Dimensions relating to Molds for Plastics Injection Molding Machines
- KS M ISO 8606-2006(2016) Plastics-Prepregs-Bulk moulding compound(BMC) and dough moulding compound(DMC)-Basis for a specification
- KS M ISO 10724-1:2010 Plastics-Injection moulding of test specimens of thermosetting powder moulding compounds(PMCs)-Part 1:General principles and moulding of multipurpose test specimens
- KS B 4077-2013 Dimensions relating to Molds for Plastics Injection Molding Machines
- KS M ISO 10724-2:2010 Plastics-Injection moulding of test specimens of thermosetting powder moulding compounds(PMCs)-Part 2:Small plates
- KS B 6389-2000 Horizontal type injection plastic moulding machines
- KS B 6389-2014 Horizontal type injection plastic moulding machines
- KS M ISO 10724-1-2010(2020) Plastics-Injection moulding of test specimens of thermosetting powder moulding compounds(PMCs)-Part 1:General principles and moulding of multipurpose test specimens
- KS M ISO 1874-1:2013 PLASTICS — POLYAMIDE(PA) MOULDING AND EXTRUSION MATERIALS — PART 1: DESIGNATION
- KS M ISO 1874-1:2008 Plastics-Polyamide(PA) moulding and extrusion materials-Part 1:Designation system and basis for specifications
- KS F 5602-2016 Plastic profile for windows and doors
- KS F 5602-2018 Plastic profile for windows and doors
- KS B 6019-2014(2020) Plastics moulding machinery — Vocabulary
- KS T 1068-2003 Plastic coating compound, strippable(hot dipping)
- KS B 1427-2009 Accuracy system of injection molded plastic cylindrical gears
- KS M ISO 10724-2-2010(2020) Plastics-Injection moulding of test specimens of thermosetting powder moulding compounds(PMCs)-Part 2:Small plates
国家机械工业局, large plastic model
British Standards Institution (BSI), large plastic model
- BS EN ISO 10724-1:2001 Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - General principles and moulding of multipurpose test specimens
- BS EN ISO 10724-1:1999 Plastics. Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs). General principles and moulding of multipurpose test specimens
- BS ISO 10724-2:1999 Plastics. Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs). Small plates
- BS EN ISO 10724-2:1999 Plastics. Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs). Small plates
- BS EN ISO 10724-2:2001 Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Small plates
- BS ISO 10724-1:1998 Plastics. Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs). General principles and moulding of multipurpose test specimens
- BS EN ISO 294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Determination of moulding shrinkage
- BS EN ISO 3671:1999 Plastics. Aminoplastic moulding materials. Determination of volatile matter
- BS EN ISO 3671:2023 Plastics. Aminoplastic moulding materials. Determination of volatile matter
- BS EN ISO 308:1998 Plastics. Phenolic moulding materials. Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state)
- BS EN ISO 28941-1:2009 Plastics. Poly(phenylene ether) (PPE) moulding and extrusion materials. Designation system and basis for specifications
- BS EN ISO 28941-1:2008 Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Designation system and basis for specifications
- BS EN ISO 15103-2:2007 Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Preparation of test specimens and determination of properties
- BS ISO 34-1:2015 Rubber, vulcanized or thermoplastic. Determination of tear strength. Trouser, angle and crescent test pieces
- BS ISO 34-1:2010 Rubber, vulcanized or thermoplastic. Determination of tear strength. Trouser, angle and crescent test pieces
Shanxi Provincial Standard of the People's Republic of China, large plastic model
- DB1407/T 025-2020 SLDP10-28 plastic greenhouse construction technical specifications
- DB14/T 2416-2022 Technical Regulations for Cultivation of Fruit Type Cucumbers in Plastic Greenhouses
Indonesia Standards, large plastic model
- SNI ISO 295:2011 Plastics - Compression moulding of test specimens of thermosetting materials
- SNI 05-3300-1994 Lifting appliances - Range of maximum capacities for basic models
- SNI 06-4595-1998 Plastics - Injections moulding test specimens of thermo plastic materials
SAE - SAE International, large plastic model
U.S. Military Regulations and Norms, large plastic model
- ARMY MIL-P-43043 C NOTICE 3-2000 PLASTIC MOLDING MATERIAL, PRE-MIX, POLYESTER, GLASS FIBER REINFORCED
- ARMY MIL-P-43043 C REINST NOTICE 2-2000 PLASTIC MOLDING MATERIAL, PRE-MIX, POLYESTER, GLASS FIBER REINFORCED
- ARMY MIL-P-43043 C-1978 PLASTIC MOLDING MATERIAL, PRE-MIX, POLYESTER, GLASS FIBER REINFORCED
- ARMY MIL-P-60312 C NOTICE 2-2009 PARTS, MOLDED, PLASTIC FORM, POLYSTYRENE (FOR USE WITH AMMUNITION)
- ARMY MIL-P-60312C (2)-1986 PARTS, MOLDED, PLASTIC FOAM, POLYSTYRENE (FOR USE WITH AMMUNITION)
- ARMY MIL-P-60312C-1975 PARTS, MOLDED, PLASTIC FOAM, POLYSTYRENE (FOR USE WITH AMMUNITION)
- ARMY MIL-P-149 D NOTICE 2-1997 PLASTIC COATING COMPOUND, STRIPPABLE (HOT DIPPING)
- ARMY MIL-P-149 D VALID NOTICE 1-1991 PLASTIC COATING COMPOUND, STRIPPABLE (HOT DIPPING)
- ARMY MIL-P-149 D-1984 PLASTIC COATING COMPOUND, STRIPPABLE (HOT DIPPING)
- ARMY MIL-PRF-49137 C-2004 CAPACITORS, FIXED, ELECTROLYTIC (SOLID ELECTROLYTE), TANTALUM, MOLDED, CONFORMAL COATED AND METAL CASED WITH PLASTIC END-FILL, NONHERMETICALLY SEALED, GENERAL SPECIFICATION FOR
国家市场监督管理总局、中国国家标准化管理委员会, large plastic model
- GB/T 41345-2022 General technical requirements for compression mould for plastic closure
Association of German Mechanical Engineers, large plastic model
- VDI 3378-2015 Lubrication of large stamping and forming dies
- VDI 3357-1995 Wear plates in large forming dies
- VDI 3386-1990 Cotter keys in large forming dies
- VDI 3945 Blatt 3-2000 Environmental meteorology - Atmospheric dispersion models - Particle model
- VDI 3387-1998 Square guide ways in large forming dies
- VDI 3945 Blatt 1-1996 Environmental meteorology - Atmospheric dispersion models; Gaussian Puff Model
- VDI 3349-2013 Trim steels for large stamping dies
- VDI 3141-2000 Lock steps and draw beads in large forming dies
- VDI 3378-1992 Lubricating of large tools and dies
- VDI 3387-2014 Heel guidings in large stamping and forming dies
- VDI 3363-1993 Shoulder screws and shoulder bushes in large forming dies
- VDI 3347-2013 Design and use of die buttons in large stamping dies
- VDI 3357-2014 Sliding elements in large stamping dies
- VDI 3003-2010 Nitrogen gas springs in large stamping dies
- DVS 2216-3-1992 "Ultrasonic joining of moulded parts and semi-finished parts of thermoplastic polymers in mass production, forming with ultrasound, staking, swaging and tamping"
- VDI 3003 Blatt 4-2013 Nitrogen gas springs in large stamping dies - Nitrogen gas springs with enhanced force
- VDI 2003-1976 Chip-forming machining of pastics
- VDI 3003 Blatt 1-2015 Nitrogen gas springs in large stamping and forming dies - Safety instructions for usage
- VDI 3782 Blatt 1-2016 Environmental meteorology - Atmospheric dispersion models - Gaussain plume model for the determination of ambient air characteristics
- VDI 3782 Blatt 1-2009 Environmental meteorology - Atmospheric dispersion models - Gaussain plume model for the determination of ambient air characteristics
- VDI 3388-1999 Materials for trimming and forming dies
- VDI 3388-2012 Materials for trimming and forming dies
Lithuanian Standards Office , large plastic model
- LST EN 14598-3-2005 Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements
- LST EN 13677-3-2003 Reinforced thermoplastic moulding compounds - Specification for GMT - Part 3: Specific requirements
- LST EN ISO 10724-2:2002 Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 2: Small plates (ISO 10724-2:1998)
- LST EN ISO 10724-1:2002 Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 1: General principles and moulding of multipurpose test specimens (ISO 10724-1:1998)
- LST EN 13677-2-2003 Reinforced thermoplastic moulding compounds - Specification for GMT - Part 2: Methods of test and general requirements
- LST EN 802-2001 Plastics piping and ducting systems - Injection-moulded thermoplastics fittings for pressure piping systems - Test method for maximum deformation by crushing
AENOR, large plastic model
- UNE-EN 14598-3:2006 Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements
- UNE-EN ISO 10724-2:2001 Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 2: Small plates. (ISO 10724-2:1998)
- UNE-EN ISO 10724-1:2002 Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 1: General principles and moulding of multipurpose test specimens. (ISO 10724-1:1998)
- UNE-EN 13677-2:2003 Reinforced thermoplastic moulding compounds - Specification for GMT - Part 2: Methods of test and general requirements
Professional Standard - Education, large plastic model
- JY 0316-1991 Specification for human lymph node model
- JY 0318-1991 Specification for human vertebrae model
- JY 162-1984 Alveolar Enlargement Model Technical Conditions (Trial)
- JY 0317-1991 Specification for cell membrane structure model
- JY 161-1984 Larynx anatomical enlarged model technical conditions (trial)
- JY 165-1984 Ear Anatomy Magnification Model Technical Conditions (Trial)
Association Francaise de Normalisation, large plastic model
- NF H34-008:1977 Tubs of non-reinforced plastic. Model of inspection form.
- NF ISO 14886:2015 Navires et technologie marine - Grands yachts - Protection structurelle contre l'incendie pour les yachts en plastique renforcé
- NF ISO 15600:2001 Outillage de moulage - Feuilles d'isolation thermique dans les moules d'injection
- NF EN 1842:1997 Plastiques - Matières à mouler thermodurcissables (SMC-BMC) - Détermination du retrait au moulage par compression.
- NF ISO 12165:2020 Outillage de moulage - Composants des moulages par compression, moules d'injection et moules pour fonderie sous pression - Termes et symboles
- NF EN ISO 294-2:2018 Plastiques - Moulage par injection des éprouvettes de matériaux thermoplastiques - Partie 2 : Barreaux de traction de petites dimensions
- NF T53-051-2:2007 Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties.
- NF T50-001-2:1996 Plastics. Polyamide (pa) moulding and extrusion materials. Part 2 : preparation of test specimens and determination of properties.
- NF ISO 20929:2019 Outillage de presse - Plaques de frottement latérales pour grands outils d'emboutissage et de formage
- NF EN ISO 293:2023 Plastiques - Moulage par compression des éprouvettes en matières thermoplastiques
- NF E63-524*NF ISO 16916:2016 Tools for moulding - Tools specification sheet for injection moulds
- NF T51-294-4*NF EN ISO 294-4:2019 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4 : determination of moulding shrinkage
- NF EN ISO 294-4:2019 Plastiques - Moulage par injection des éprouvettes de matériaux thermoplastiques - Partie 4 : détermination du retrait au moulage
- NF S94-060-2:2006 Implants for surgery - Ultra-high molecular-weight polyethylene - Part 2 : moulded forms.
- NF EN ISO 3671:1998 Matières plastiques - Matières à mouler aminoplastes - Détermination des matières volatiles.
American Gear Manufacturers Association, large plastic model
PL-PKN, large plastic model
- PN M68008-1971 Hydraulic moulding presses for plastics T-slots for mould clamping The dimensions and pottern of T-slots
- PN C89011-1992 Plastics. Compression moulding test specimens of thermoplasticmaterials
- PN C89271-1985 Plastics Melamine rnoulding materials Przedmiotem normy s? aminowe t?oczywa termoutwardzalne sk?adaj?ce si? z ?ywicy melaminowej, melaminowo-mocznikowej z dodatkiem lub bez innych ?ywic oraz zawieraj?ce nape?niacze i ?rodki smarne.
- PN P55027-1973 Publications and typography Dummy (mock-up) for printing
HU-MSZT, large plastic model
Hebei Provincial Standard of the People's Republic of China, large plastic model
- DB13/T 2654-2018 Technical specifications for the construction of light and simple multi-span plastic greenhouses
SE-SIS, large plastic model
European Committee for Standardization (CEN), large plastic model
- EN ISO 294-3:2020 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2020)
- EN ISO 294-3:1998 Plastics - Injection Moulding of Test Specimens of Thermoplastic Materials - Part 3: Small Plates ISO 294-3:1996
- EN ISO 294-3:2003 Plastics - Injection Moulding of Test Specimens of Thermoplastic Materials - Part 3: Small Plates ISO 294-3: 2002
- EN ISO 10724-1:2001 Plastics - Injection Moulding of Test Specimens of Thermosetting Powder Moulding Compounds (PMCs) - Part 1: General Principles and Moulding of Multipurpose Test Specimens ISO 10724-1:1998
- EN ISO 10724-2:2000 Plastics - Injection Moulding of Test Specimens of Thermosetting Powder Moulding Compounds (PMCs) - Part 2: Small Plates
US-FCR, large plastic model
CU-NC, large plastic model
- NC 09-107-1968 Stops for plastic molding
- NC 30-58-1986 Plastics. Safety Glasses Panoramic Model. Quality Specifications
- NC 13-21-1988 Geodesy and Cartography. Moldea Plástic Relief Maps. General Quality Specifications
Professional Standard - Military and Civilian Products, large plastic model
- WJ 2493-1997 Typical combination of blanking and forming dies for fuze cold stamping dies (Type I)
- WJ 2494-1997 Typical combination of blanking and forming dies for fuze cold stamping dies (Type II)
- WJ 878-1997 Type A stripping plate for typical combination of cold stamping die
- WJ 879-1997 B-type unloading plate for typical combination of cold stamping die
American Society for Testing and Materials (ASTM), large plastic model
- ASTM B793-16 Standard Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds
- ASTM D955-89(1996) Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics
- ASTM D955-00 Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics
- ASTM D955-08 Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics
- ASTM D955-08(2014) Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics
- ASTM D628-95(1999) Standard Specification for Asbestos Tubular Sleeving
- ASTM D628-95(2004) Standard Specification for Asbestos Tubular Sleeving
- ASTM D6289-03 Standard Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics
- ASTM D6289-98 Standard Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics
- ASTM D6289-08 Standard Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics
- ASTM D2463-15 Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers
- ASTM B793-03 Standard Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds
- ASTM D3159-10 Standard Specification for Modified ETFE-Fluoropolymer Molding and Extrusion Materials
- ASTM F2135-01(2007) Standard Specification for Molded Drain, Waste, and Vent (DWV) Short-Pattern Plastic Fittings
- ASTM D957-06 Standard Practice for Determining Surface Temperature of Molds for Plastics
- ASTM D957-95(2006)e1 Standard Practice for Determining Surface Temperature of Molds for Plastics
- ASTM D957-21 Standard Practice for Determining Surface Temperature of Molds for Plastics
- ASTM C607-88(2005) Standard Practice for Coking Large Shapes of Carbon-Bearing Materials
- ASTM F2135-01(2022) Standard Specification for Molded Drain, Waste, and Vent (DWV) Short-Pattern Plastic Fittings
(U.S.) Ford Automotive Standards, large plastic model
- FORD WSK-M4D700-A-1991 POLYAMIDE (PA) 11 FLEXIBLE, HEAT STABILIZED MOLDING AND EXTRUSION COMPOUND
- FORD ESH-M4D415-A1-1992 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), BLOW MOLDING COMPOUND
- FORD WD313-2015 THREAD FORMING SCREWS FOR PLASTIC - THROUGH HARDENED REMFORM II “HS” AND DELTA PT PAN COLLAR HEAD CATEGORY 080.035
- FORD WD 312-2015 THREAD FORMING SCREWS FOR PLASTIC - THROUGH HARDENED REMFORM II “HS” AND DELTA PT HEXAGON COLLAR HEAD CATEGORY 070.025
American National Standards Institute (ANSI), large plastic model
American Institute of Aeronautics and Astronautics (AIAA), large plastic model
ES-AENOR, large plastic model
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., large plastic model
- ASHRAE CH-99-8-2-1999 Large-Scale Physical Model Studioes for an Atrium Smoke Exhaust System
- ASHRAE LV-11-011-2011 Algorithm for Smoke Modeling in Large@ Multi-Compartmented Buildings—Implementation of the Hybrid Model
- ASHRAE LV-11-010-2011 Algorithm for Smoke Modeling in Large@ Multicompartmented Buildings—Development of a Hybrid Model
- ASHRAE SF-98-10-2-1998 Application of a Large Eddy Simulation Model to Study Room Airflow
KR-KS, large plastic model
IETF - Internet Engineering Task Force, large plastic model
- RFC 8193-2017 Information Model for Large-Scale Measurement Platforms (LMAPs)
U.S. Environmental Protection Agency (U.S. EPA), large plastic model
GB-REG, large plastic model
GM North America, large plastic model
- GM GMP.PVC.030-1991 PVC - 85 Type A Durometer, Heat Stabilized, Flexible, Extrusion Molding Compound
Professional Standard - Electron, large plastic model
- SJ/T 10515.1-1994 Configuration of plastic packaged mould.Typical configuration
- SJ/T 10515.2-1994 Configuration of plastic packaged mould.Cavity configuration
- SJ/T 10256-1991 BHC-1-3 type epoxy-improved molding plastics for electronic device
- SJ 3088-1988 Cold press dies--Typical structure of cross feeding with fixed stripper
United States Navy, large plastic model
- NAVY MIL-E-81111 B-1985 EXPLOSIVE, PLASTIC-BONDED MOLDING POWDER (PBXN-5)
- NAVY MIL-E-82756 (1)-1995 EXPLOSIVE, PLASTIC-BONDED, CAST PBXN-103
- NAVY MIL-E-82756-1994 EXPLOSIVE, PLASTIC-BONDED, CAST PBXN-103
- NAVY MIL-E-82886 (1)-1995 EXPLOSIVE, PLASTIC-BONDED, CAST PBXN-109
- NAVY MIL-E-82886-1993 EXPLOSIVE, PLASTIC-BONDED, CAST PBXN-109
- NAVY MIL-E-82902 (1)-2004 EXPLOSIVE, PLASTIC-BONDED, CAST PBXN-111
Anhui Provincial Standard of the People's Republic of China, large plastic model
AIAA - American Institute of Aeronautics and Astronautics, large plastic model
- G-003A-1996 Guide to Reference and Standard Atmosphere Models
- G-003C-2010 Guide to Reference and Standard Atmosphere Models
- G-003B-2004 Guide to Reference and Standard Atmosphere Models
- G-003-1990 Guide to Reference and Standard Atmosphere Models
Aerospace Industries Association/ANSI Aerospace Standards, large plastic model
- AIA/NAS NAS 1465-1973 Pin, Swage Locking, Steel, Standard and Oversize, Protruding Head, Tension, Pull-Type (Rev. 2)
- AIA/NAS NAS 1465-1472-1973 Pin, Swage Locking, Steel, Standard and Oversize, Protruding Head, Tension, Pull-Type Rev. 2
- AIA/NAS NAS 1466-1973 Pin, Swage Locking, Steel, Standard and Oversize, Protruding Head, Tension, Pull-Type (Rev. 2)
- AIA/NAS NAS 1468-1973 Pin, Swage Locking, Steel, Standard and Oversize, Protruding Head, Tension, Pull-Type (Rev. 2)
- AIA/NAS NAS 1470-1973 Pin, Swage Locking, Steel, Standard and Oversize, Protruding Head, Tension, Pull-Type (Rev. 2)
- AIA/NAS NAS 1472-1973 Pin, Swage Locking, Steel, Standard and Oversize, Protruding Head, Tension, Pull-Type (Rev. 2)
- AIA/NAS NAS 1436-1973 Pin, Swage Locking, Steel, Standard and Oversize, 100 Degree Shear Head, Pull-Type (Rev. 2)
- AIA/NAS NAS 1436-1442-1973 Pin, Swage Locking, Steel, Standard and Oversize, 100 Degree Shear Head, Pull-Type Rev. 2
- AIA/NAS NAS 1446-1973 Pin, Swage Locking, Steel, Standard and Oversize, Protruding Head, Shear, Pull-Type (Rev. 2)
- AIA/NAS NAS 1446-1452-1973 Pin, Swage Locking, Steel, Standard and Oversize, Protruding Head, Shear, Pull-Type Rev. 2
- AIA/NAS NAS 1448-1973 Pin, Swage Locking, Steel, Standard and Oversize, Protruding Head, Shear, Pull-Type (Rev. 2)
- AIA/NAS NAS 1450-1973 Pin, Swage Locking, Steel, Standard and Oversize, Protruding Head, Shear, Pull-Type (Rev. 2)
- AIA/NAS NAS 1452-1973 Pin, Swage Locking, Steel, Standard and Oversize, Protruding Head, Shear, Pull-Type (Rev. 2)
- AIA/NAS NAS 1456-1973 Pin, Swage Locking, Steel, Standard and Oversize, 100 Degree Head (MS24694), Tension, Pull-Type (Rev. 2)
- AIA/NAS NAS 1456-1462-1973 Pin, Swage Locking, Steel, Standard and Oversize, 100 Degree Head (MS24694), Tension, Pull-Type Rev. 2
- AIA/NAS NAS 1458-1973 Pin, Swage Locking, Steel, Standard and Oversize, 100 Degree Head (MS24694), Tension, Pull-Type (Rev. 2)
- AIA/NAS NAS 1460-1973 Pin, Swage Locking, Steel, Standard and Oversize, 100 Degree Head (MS24694), Tension, Pull-Type (Rev. 2)
- AIA/NAS NAS 1462-1973 Pin, Swage Locking, Steel, Standard and Oversize, 100 Degree Head (MS24694), Tension, Pull-Type (Rev. 2)
- AIA/NAS NAS 1475-1973 Pin, Swage Locking, Steel, Standard and Oversize, 100 Degree Head (MS20426), Tension, Pull-Type (Rev. 2)
- AIA/NAS NAS 1475-1482-1973 Pin, Swage Locking, Steel, Standard and Oversize, 100 Degree Head (MS20426), Tension, Pull-Type Rev. 2
- AIA/NAS NAS 1476-1973 Pin, Swage Locking, Steel, Standard and Oversize, 100 Degree Head (MS20426), Tension, Pull-Type (Rev. 2)
- AIA/NAS NAS 1478-1973 Pin, Swage Locking, Steel, Standard and Oversize, 100 Degree Head (MS20426), Tension, Pull-Type (Rev. 2)
- AIA/NAS NAS 1480-1973 Pin, Swage Locking, Steel, Standard and Oversize, 100 Degree Head (MS20426), Tension, Pull-Type (Rev. 2)
- AIA/NAS NAS 1482-1973 Pin, Swage Locking, Steel, Standard and Oversize, 100 Degree Head (MS20426), Tension, Pull-Type (Rev. 2)
- AIA/NAS NAS 1438-1973 Pin, Swage Locking, Steel, Standard and Oversize, 100 Degree Shear Head, Pull-Type (Rev. 2) Rev 2
- AIA/NAS NAS 1440-1973 Pin, Swage Locking, Steel, Standard and Oversize, 100 Degree Shear Head, Pull-Type (Rev. 2) Rev 2
- AIA/NAS NAS 1442-1973 Pin, Swage Locking, Steel, Standard and Oversize, 100 Degree Shear Head, Pull-Type (Rev. 2) Rev 2
CZ-CSN, large plastic model
IN-BIS, large plastic model
International Federation of Trucks and Engines, large plastic model
Fujian Provincial Standard of the People's Republic of China, large plastic model
RO-ASRO, large plastic model
Tianjin Provincial Standard of the People's Republic of China, large plastic model
- DB12/T 570-2015 Plastic Greenhouse Spring Cucumber-Autumn Cucumber Cultivation Model
- DB12/T 569-2015 Oversummer Pepper-Winter Spinach Cultivation Model in Plastic Greenhouse
AT-ON, large plastic model
- ONORM C 9552 Teil.1-1988 Plastic moulding materials; Polyethylene (PE) moulding materials; Classification and designation
- ONORM C 9550 Teil.1-1986 Plastic moulding materials; polypropylene (PP) moulding materials; Classification and designation
U.S. Air Force, large plastic model
机械工业部, large plastic model
- JB/T 8068.1-1995 Typical combination of cold punching die guide plate die Typical combination of longitudinal feeding
- JB/T 8068.2-1995 Typical combination of cold punching die guide plate die Typical combination of transverse feeding
- JB/T 8068.4-1995 Typical combination of cold punching die, guide plate and die, typical combination of elastic pressure and transverse feeding
- JB/T 8068.3-1995 Typical combination of cold punching die, guide plate and die, typical combination of spring pressing and longitudinal feeding
CH-SNV, large plastic model
GM Europe, large plastic model
- GME STD 518291-2001 Cellular plastic 8291 Self adhesive Polyethylene cellular plastic Cellplast 8291 Sj鋖vh鋐tande polyetencellplast English/Swedish
ATIS - Alliance for Telecommunications Industry Solutions, large plastic model
- T1.TR.9-1991 Maximum Skew One-Tenth Maximum (MSTM) Model for Mode-Partition Noise (MPN)
GM Holden Ltd, large plastic model
BELST, large plastic model
- STB 1264-2001 Plastic profiles for windows and doors. Specifications
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, large plastic model
未注明发布机构, large plastic model
- BS EN ISO 10724-1:2001(2002) Plastics — Injection moulding oftest specimens of thermosetting powder moulding compounds (PMCs) — Part1 : Generalprinciples and moulding ofmultipurpose test specimens
- DIN EN ISO 293:2003 Plastics — Compression molding test specimens of thermoplastic materials
- DIN EN ISO 294-3:1998 Plastics Injection molding of thermoplastic test specimens Part 3: Small plates
Professional Standard - Commodity Inspection, large plastic model
- SN/T 0906-2000 Method for injection moulding test spcimens of thermoplastic materials for import and export
API - American Petroleum Institute, large plastic model
- API PUBL 4431-1986 Forced Venting to Remove Gasoline Vapor from a Large-Scale Model Aquifer
GM Daewoo, large plastic model
TR-TSE, large plastic model
- TS 3199-1978 Plastics - Melamine - Formaldehyde Mouldings- Determination Of Extractable Formaldehyde