ZH
RU
ES

Particle size analyzer concentration

Particle size analyzer concentration, Total:498 items.

In the international standard classification, Particle size analyzer concentration involves: Geology. Meteorology. Hydrology, Air quality, Analytical chemistry, Test conditions and procedures in general, Pharmaceutics, Particle size analysis. Sieving, Installations in buildings, Medical equipment, Fuels, Miscellaneous domestic and commercial equipment, Radiation measurements, Alarm and warning systems, Veterinary medicine, Radiation protection, Nuclear energy engineering, Water quality, Coals, Power stations in general, Environmental protection, Cutting tools, Measurement of fluid flow, Vocabularies, Compressors and pneumatic machines, Products of the textile industry, Products of the chemical industry, Animal feeding stuffs, Laboratory medicine, Earthworks. Excavations. Foundation construction. Underground works, Protection against fire, Cereals, pulses and derived products, Astronomy. Geodesy. Geography, Wastes, Linear and angular measurements, Elements of buildings, Pulps, Beverages, Measurement of volume, mass, density, viscosity, Testing of metals, Construction materials, General methods of tests and analysis for food products, Equipment for the chemical industry, Electricity. Magnetism. Electrical and magnetic measurements, Metalliferous minerals, Colour coding, Dentistry, Ferroalloys, Electrical engineering in general, Electrical wires and cables, Inorganic chemicals, Prepackaged and prepared foods, Milk and milk products, Tea. Coffee. Cocoa, Non-metalliferous minerals, Refractories, Welding, brazing and soldering, Mining and quarrying, Law. Administration, Materials for aerospace construction, Biology. Botany. Zoology, Processes of the textile industry, Raw materials for rubber and plastics, Medical sciences and health care facilities in general, Spices and condiments. Food additives, Fruits. Vegetables, Environmental testing, Products of non-ferrous metals, Ferrous metals, Fertilizers.

中国气象局, Particle size analyzer concentration

QX/T 509-2019 GRIMM 180 Particulate Matter Concentration Monitor Calibration Specifications
QX/T 380-2017 Air negative (oxygen) ion concentration level

European Committee for Standardization (CEN), Particle size analyzer concentration

EN 13205:2001 Workplace Atmospheres - Assessment of Performance of Instruments for Measurement of Airborne Particle Concentrations
CEN/TR 16013-3:2012 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 3: Evaluation of airborne particle concentrations using photometers
PD CEN/TS 16976:2016 Ambient air - Determination of the particle number concentration of atmospheric aerosol
EN ISO 13161:2020 Water quality - Polonium 210 - Test method using alpha spectrometry (ISO 13161:2020)
PD CEN/TR 16013-3:2012 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 3: Evaluation of airborne particle concentrations using photometers
EN ISO 14644-1:2015 Cleanrooms and associated controlled environments - Part 1: Classification of air cleanliness by particle concentration (ISO 14644-1:2015)
CEN/TR 16013-2:2010 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters
EN ISO 13161:2015 Water quality - Measurement of polonium 210 activity concentration in water by alpha spectrometry
CEN/TS 17021:2017 Stationary source emissions - Determination of the mass concentration of sulphur dioxide by instrumental techniques
PD CEN/TR 16013-2:2010 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters
PD CEN/TS 16450:2013 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5)
EN ISO 14644-9:2012 Cleanrooms and associated controlled environments - Part 9: Classification of surface cleanliness by particle concentration (ISO 14644-9:2012)
EN ISO 14644-9:2022 Cleanrooms and associated controlled environments - Part 9: Assessment of surface cleanliness for particle concentration (ISO 14644-9:2022)
EN 13205-4:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4: Laboratory performance test based on comparison of concentrations
PD CEN/TS 17021:2017 Stationary source emissions - Determination of the mass concentration of sulphur dioxide by instrumental techniques
EN 13205-1:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 1: General requirements
FprEN 12341 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter

Group Standards of the People's Republic of China, Particle size analyzer concentration

T/WJZZ 009-2021 Whole measurement calibration method of particle number concentration measuring instrument
T/SSM 5-2022 Calibration specifications for particle number concentration measuring instruments used in motor vehicle emissions
T/BSPT 003-2018 Performance test method for fine particulate matter （PM2.5 ）mass concentration measurement instruments based on light scattering principle
T/SAEPI 003-2019 Commercial Indoor Particles Concentration Detection System
T/BSPT 003-2020 Powder Technology—Performance test method for fine particulate matter （PM2.5）mass concentration measurement instruments based on light scattering principle
T/NAIA 0193-2023 Determination of Concentration and Purity of Single-chain Antibody Eukaryotic Expression Plasmid DNA by UV Spectrophotometry
T/CBMMAS 11-2020 Technical requirements for bioaerosol particle concentrationmonitoring in ship cabin
T/XZFW 004-2023 Determination of low-concentration particulate matter in exhaust gas from stationary pollution sources β-ray method
T/CEC 426.3-2022 General Technical Conditions for Electric Power Oil Testing Instruments Part 3: Particle Size Meter
T/XZFW 006-2023 Digital processor for monitoring results of low-concentration particulate matter in exhaust gas from fixed pollution sources
T/XZFW 010-2023 Stationary source emission —data processor for monitoring of particulate matter at low concentration
T/CCAS 006-2018 Validation and comprehensive evaluation specification of laser particle size analyzer (wet method)
T/CCEMA 0001-2020 Particle Size and Shape of Granular Potash Fertilizer
T/GDMIA 001-2019 Superfine particle size sand mill
T/CNIA 0042-2020 Small particle size ferromolybdenum briquetting ball

National Metrological Verification Regulations of the People's Republic of China, Particle size analyzer concentration

JJG 846-2015 Dust Concentration Measuring Instruments
JJG 167-2020 Laser particle size distribution analyzer
JJG 950-2000 Verification Regulation of Oil Content in Water Analyzers
JJG 950-2012 Verification Regulation of Analyzers for Oil Content in Water
JJG 1089-2013 Osmometers
JJG 902-1995 Verification Regulation of Patical Size Meter by Photosedimention
JJG 1104-2015 Dynamic Light Scattering Particle Size Analyzers
JJG(机械) 7-1990 Verification rules for single particle compressive strength tester
JJG(煤炭) 08-1996 Verification Regulation of Direct Reading Mine Dust Concentration Measuring Instrument
JJG(地质) 1019-1990 SKC-2000 Type Light Transmission Particle Size Distribution Tester Verification Regulations

Professional Standard - Urban Construction, Particle size analyzer concentration

CJ/T 524-2018 Odorant Concentration Monitor

German Institute for Standardization, Particle size analyzer concentration

DIN EN 13205:2002 Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations; German version EN 13205:2001
DIN EN 16450:2017-07 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5); German version EN 16450:2017
DIN 33899-3:2014-09 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 3: Evaluation of airborne particle concentrations using photometers
DIN 33899-3:2014 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 3: Evaluation of airborne particle concentrations using photometers
DIN EN 16976:2023-06 Ambient air - Determination of the particle number concentration of atmospheric aerosol; German and English version prEN 16976:2023 / Note: Date of issue 2023-04-28*Intended as replacement for DIN CEN/TS 16976 (2016-11).
DIN CEN/TS 16976:2016-11*DIN SPEC 33974:2016-11 Ambient air - Determination of the particle number concentration of atmospheric aerosol; German version CEN/TS 16976:2016
DIN ISO 16000-42:2022-01 Indoor air - Part 42: Measurement of the particle number concentration by Condensation Particle Counters (ISO/DIS 16000-42:2021); Text in German and English / Note: Date of issue 2021-12-10
DIN EN ISO 14644-9:2022-10 Cleanrooms and associated controlled environments - Part 9: Assessment of surface cleanliness for particle concentration (ISO 14644-9:2022); German version EN ISO 14644-9:2022
DIN 33899-2:2014-02 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters
DIN CEN/TS 17021:2017-05*DIN SPEC 33976:2017-05 Stationary source emissions - Determination of the mass concentration of sulphur dioxide by instrumental techniques; German version CEN/TS 17021:2017
DIN 33899-2:2014 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters
DIN EN ISO 14644-1:2016-06 Cleanrooms and associated controlled environments - Part 1: Classification of air cleanliness by particle concentration (ISO 14644-1:2015); German version EN ISO 14644-1:2015
DIN ISO 9136-2:2000 Abrasive grains - Determination of bulk density - Part 2: Microgrits (ISO 9136-2:1999)
DIN EN 13205-4:2014-09 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4: Laboratory performance test based on comparison of concentrations; German version EN 13205-4:2014
DIN ISO 6344-1:2000 Coated abrasives - Grain size analysis - Part 1: Grain size distribution test (ISO 6344-1:1998)
DIN EN ISO 4119:1996 Pulps - Determination of stock concentration (ISO 4119:1995); German version EN ISO 4119:1996
DIN ISO 9276-2:2018-09 Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions (ISO 9276-2:2014)
DIN ISO 9136-1:2006 Abrasive grains - Determination of bulk density - Part 1: Macrogrits (ISO 9136-1:2004);English version of DIN ISO 9136-1:2006-03
DIN 66118:1984 Particle size analysis; size analysis by air classification; fundamentals
DIN ISO 6344-3:2000 Coated abrasives - Grain size analysis - Part 3: Determination of grain size distribution of microgrits P 240 to P 2500 (ISO 6344-3:1998)
DIN 66120:1983 Particle size analysis; size analysis by air classification with centrifugal counterflow classifier
DIN 66120:2016 Particle size analysis - Size analysis by air classification with centrifugal counterflow classifier
DIN 10318:1995 Determination of the density of buttermilk serum
DIN EN 16966:2019 Workplace exposure - Measurement of exposure by inhalation of nano-objects and their aggregates and agglomerates - Metrics to be used such as number concentration, surface area concentration and mass concentration
DIN VDE 0405-2:2005 Determination of breath alcohol concentration - Part 2: Specification of evidential breath analyzers
DIN VDE 0405-1:2017 Determination of breath alcohol concentration - Part 1: Specification of evidential breath analyzers
DIN ISO 9276-2:2018 Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions (ISO 9276-2:2014)
DIN ISO 9276-2:2006 Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions (ISO 9276-2:2001);English version of DIN ISO 9276-2:2006-02

Japanese Industrial Standards Committee (JISC), Particle size analyzer concentration

JIS K 0554:1995 Testing methods for concentration of fine particles in highly purified water
JIS Z 4512:1995 Measuring methods of concentration of airborne radioactive particle
JIS Z 8813:1994 Measuring methods for suspended particulate matter concentration in air-general requirements
JIS L 0808:1994 Standard depths of colour
JIS B 9920:1989 Measuring methods for airborne particles in clean room and evaluating methods for air cleanliness of clean room
JIS B 7996:2018 Performance evaluation test method of automated concentration monitoring instrument of dust in flue gas
JIS B 9920-1:2019 Cleanrooms and associated controlled environments -- Part 1: Classification of air cleanliness by particle concentration
JIS R 6001:1987 Abrasive grain sizes
JIS L 0810:1973 Standard depths of shade no.3
JIS L 0812:1973 Standard depths of shade no.5
JIS T 5505-3:2001 Dental rotary instruments -- Diamond instruments -- Part 3: Grit sizes, designation and colour code
JIS T 5505-3:2013 Dental rotary instruments .Diamond instruments.Part 3: Grit sizes, designation and colour code
JIS G 1641:1998 Methods of sampling for size analysis of ferroalloys and size determination
JIS Z 8819-2:2001 Representation of results of particle size analysis -- Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions
JIS P 8225:2003 Pulps -- Determination of stock concentration
JIS Z 7152:2013 Determination of PM10/PM2.5 mass concentration in flue gas by use of virtual impactors
JIS R 6001:1998 Bonded abrasive grain sizes
JIS R 6010:2000 Coated abrasive grain sizes

Professional Standard - Petroleum, Particle size analyzer concentration

SY/T 6542-2003 Core particle sizer
SY/T 6582.3-2003 The calibration for petroleum nuclear logging tool Part 3:The calibration for compensated density/litho-density tool

American Society of Mechanical Engineers (ASME), Particle size analyzer concentration

ASME PTC 38-1980(R1985) Determining the Concentration of Particulate Matter in A Gas Stream
ASME PTC 38-1980 Determining the Concentration of Particulate Matter in a Gas Stream

CZ-CSN, Particle size analyzer concentration

CSN ISO 8840:1992 Rfractory materials. Determination of bulk density of granular materials (grain density)
CSN 22 4015-1979 Abrasives. Diamond powders. Grain size and granulometric composition
CSN 72 1172-1967 Determination of grain size distribution and of grain form of aggregates
CSN 68 4153-1989 Concentration of the impurities by he extraction method
CSN 72 1172 Z3-1997

Danish Standards Foundation, Particle size analyzer concentration

DS/EN 13205:2002 Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations
DS/EN IEC 61563:2021 Radiation protection instrumentation – Equipment for measuring the activity concentration of gamma-emitting radionuclides in foodstuffs
DS/CEN/TR 16013-3:2012 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 3: Evaluation of airborne particle concentrations using photometers
DS/CEN/TR 16013-2:2010 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters
DS/EN ISO 14644-9:2012 Cleanrooms and associated controlled environments - Part 9: Classification of surface cleanliness by particle concentration
DS/CEN/TS 16450:2013 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5)
DS/EN ISO 4119:1996 Pulps - Determination of stock concentration
DS/ISO 13161:2011 Water quality - Measurement of polonium 210 activity concentration in water by alpha spectrometry

Lithuanian Standards Office , Particle size analyzer concentration

LST EN 13205-2002 Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations
LST EN ISO 14644-9:2012 Cleanrooms and associated controlled environments - Part 9: Classification of surface cleanliness by particle concentration (ISO 14644-9:2012)
LST EN IEC 61563:2021 Radiation protection instrumentation - Equipment for measuring the activity concentration of gamma-emitting radionuclides in foodstuffs (IEC 61563:2019)
LST EN 12341-2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter

British Standards Institution (BSI), Particle size analyzer concentration

BS EN 13205:2002 Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations
BS ISO 27891:2015 Aerosol particle number concentration. Calibration of condensation particle counters
BS ISO 16000-42:2023 Indoor air - Measurement of the particle number concentration by condensation particle counters
BS ISO 23484:2023 Determination of particle concentration by small-angle X-ray scattering (SAXS)
BS ISO 9096:2003 Stationary source emissions - Manual determination of mass concentration of particulate matter
BS ISO 9096:2017 Stationary source emissions. Manual determination of mass concentration of particulate matter
BS EN ISO 14644-9:2012 Cleanrooms and associated controlled environments. Classification of surface cleanliness by particle concentration
BS ISO 13271:2012 Stationary source emissions. Determination of PM10/PM2,5 mass concentration in flue gas. Measurement at higher concentrations by use of virtual impactors
BS EN IEC 61563:2021 Radiation protection instrumentation. Equipment for measuring the activity concentration of gamma-emitting radionuclides in foodstuffs
BS PD CEN/TS 16976:2016 Ambient air. Determination of the particle number concentration of atmospheric aerosol
BS EN 16450:2017 Tracked Changes. Ambient air. Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5)
BS ISO 12141:2002 Stationary source emissions. Determination of mass concentration of particulate matter (dust) at low concentrations. Manual gravimetric method
22/30441138 DC BS ISO 23484. Determination of particle concentration by smallangle X-ray scattering (SAXS)
BS ISO 11704:2010 Water quality - Measurement of gross alpha and beta activity concentration in non-saline water - Liquid scintillation counting method
23/30436644 DC BS ISO 19430. Determination of particle size distribution and number concentration by particle tracking analysis (PTA)
BS EN ISO 14644-1:2015 Tracked Changes. Cleanrooms and associated controlled environments. Classification of air cleanliness by particle concentration
BS EN ISO 14644-9:2022 Tracked Changes. Cleanrooms and associated controlled environments. Assessment of surface cleanliness for particle concentration
23/30464870 DC BS EN 16976. Ambient air. Determination of the particle number concentration of atmospheric aerosol
BS ISO 6344-1:1998 Coated abrasives. Grain size analysis. Grain size distribution test
21/30396033 DC BS ISO 16000-42. Indoor air - Part 42. Measurement of the particle number concentration by Condensation Particle Counters
BS EN 13205-4:2014 Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations. Laboratory performance test based on comparison of concentrations
BS ISO 14644-12:2018 Cleanrooms and associated controlled environments - Specifications for monitoring air cleanliness by nanoscale particle concentration
BS ISO 9136-2:2000 Abrasive grains - Determination of bulk density - Microgrits
BS ISO 21501-1:2009 Determination of particle size distribution - Single particle light interaction methods - Light scattering aerosol spectrometer
BS ISO 9276-2:2001 Representation of results of particle size analysis - Calculation of average particle sizes/diameters and moments from particle size distributions
BS ISO 9276-2:2014 Representation of results of particle size analysis. Calculation of average particle sizes/diameters and moments from particle size distributions
BS 2742M:1960 Miniature smoke chart
BS PD CEN/TR 16013-2:2010 Workplace exposure — Guide for the use of direct-reading instruments for aerosol monitoring Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters
BS ISO 8573-8:2004 Compressed air - Test methods for solid particle content by mass concentration
BS EN ISO 7711-3:2004 Dentistry. Diamond rotary instruments. Grit sizes, designation and colour code
BS 2742C:1957 Ringelmann chart
BS ISO 6344-3:2013 Coated abrasives. Grain size analysis. Determination of grain size distribution of microgrits P240 to P2500
BS PD CEN/TS 17021:2017 Stationary source emissions. Determination of the mass concentration of sulphur dioxide by instrumental techniques
BS EN ISO 4119:1995 Pulps. Determination of stock concentration
BS EN ISO 4119:1996 Pulps. Determination of stock concentration
BS ISO 14966:2019 Ambient air. Determination of numerical concentration of inorganic fibrous particles. Scanning electron microscopy method
BS ISO 8840:2021 Refractory materials. Determination of bulk density of granular materials (grain density)
BS EN 12341:2014 Ambient air. Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
BS EN ISO 14644-14:2016 Cleanrooms and associated controlled environments. Assessment of suitability for use of equipment by airborne particle concentration
PD ISO/TS 20593:2017 Ambient air. Determination of the mass concentration of tire and road wear particles (TRWP). Pyrolysis-GC-MS method
BS ISO 6344-3:2021 Coated abrasives. Determination and designation of grain size distribution - Microgrit sizes P240 to P5000
BS ISO 6344-2:2021 Coated abrasives. Determination and designation of grain size distribution - Macrogrit sizes P12 to P220

Professional Standard - Nuclear Industry, Particle size analyzer concentration

EJ/T 20216-2018 Environmental radon concentration double filter membrane measuring instrument

工业和信息化部, Particle size analyzer concentration

JB/T 20201-2021 Vaporized hydrogen peroxide concentration detector
HG/T 6000-2022 Electromagnetic acid-base concentration meter

International Organization for Standardization (ISO), Particle size analyzer concentration

ISO/CD 12141 Stationary source emissions — Determination of mass concentration of particulate matter (dust) at low concentrations — Manual gravimetric method
ISO 27891:2015 Aerosol particle number concentration - Calibration of condensation particle counters
ISO/CD TS 6818 Traditional Chinese medicine — Test method for moxa floss quality — concentration of waste particles
ISO/DIS 19430 Determination of particle size distribution and number concentration by particle tracking analysis (PTA)
ISO/FDIS 23484 Determination of particle concentration by small-angle X-ray scattering (SAXS)
ISO 23484:2023 Determination of particle concentration by small-angle X-ray scattering (SAXS)
ISO/FDIS 16000-42 Indoor air — Part 42: Measurement of the particle number concentration by condensation particle counters
ISO 16000-42:2023 Indoor air — Part 42: Measurement of the particle number concentration by condensation particle counters
ISO 9096:2003 Stationary source emissions - Manual determination of mass concentration of particulate matter
ISO 10980:1995 Validation of the strength of reference solutions used for measuring concentrations
ISO 13271:2012 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at higher concentrations by use of virtual impactors
ISO 1306:1987 Rubber compounding ingredients; Carbon black (pelletized); Determination of pour density
ISO 9096:2017 Stationary source emissions — Manual determination of mass concentration of particulate matter
ISO 12141:2002 Stationary source emissions - Determination of mass concentration of particulate matter (dust) at low concentrations - Manual gravimetric method
ISO 14644-9:2022 Cleanrooms and associated controlled environments — Part 9: Assessment of surface cleanliness for particle concentration
ISO 14644-1:2015 Cleanrooms and associated controlled environments - Part 1: Classification of air cleanliness by particle concentration
ISO 9096:2003/cor 1:2006 Stationary source emissions - Manual determination of mass concentration of particulate matter; Technical Corrigendum 1
ISO 14644-9:2012 Cleanrooms and associated controlled environments - Part 9: Classification of surface cleanliness by particle concentration
ISO 9138:1993 Abrasive grains; sampling and splitting
ISO 9138:2015 Abrasive grains - Sampling and splitting
ISO 14644-12:2018 Cleanrooms and associated controlled environments - Part 12: Specifications for monitoring air cleanliness by nanoscale particle concentration
ISO 2325:1979 Coke — Size analysis (Nominal top size 20 mm or less)
ISO 2325:1972 Title missing - Legacy paper document
ISO 9136-1:2004 Abrasive grains - Determination of bulk density - Part 1: Macrogrits
ISO 2325:1986 Coke; Size analysis (Nominal top size 20 mm or less)
ISO 4119:1995 Pulps - Determination of stock concentration
ISO 14966:2019 Ambient air — Determination of numerical concentration of inorganic fibrous particles — Scanning electron microscopy method
ISO 1953:1972 Hard coals; Size analysis
ISO 8876:1989 Fluorspar; determination of particle size distribution by sieving
ISO 728:1995 Coke (nominal top size greater than 20 mm) - Size analysis by sieving
ISO 905:1976 Hydrochloric acid for industrial use; Evaluation of hydrochloric acid concentration by measurement of density
ISO 911:1977 Sulphuric acid for industrial use; Evaluation of sulphuric acid concentration by measurement of density
ISO 12756:1998/Amd 1:2011 Drawing and writing instruments - Ball point pens and roller ball pens - Vocabulary - Amendment 1: Viscosity of the writing fluid
ISO 125:2003 Natural rubber latex concentrate - Determination of alkalinity
ISO 125:1990 Natural rubber latex concentrate; determination of alkalinity
ISO 125:2011 Natural rubber latex concentrate - Determination of alkalinity
ISO 6230:1989 Manganese ores; determination of size distribution by sieving
ISO 8486:1986 Bonded abrasives; Grain size analysis; Designation and determination of grain size distribution of macrogrits F4 to F220

KR-KS, Particle size analyzer concentration

KS I ISO 12141-2017 Stationary source emissions－Determination of mass concentration of particulate matter(dust) at low concentrations－Manual gravimetric method
KS I ISO 12141-2022 Stationary source emissions — Determination of mass concentration of particulate matter (dust) at low concentrations — Manual gravimetric method
KS I ISO 9096-2020 Stationary source emissions — Manual determination of mass concentration of particulate matter
KS B ISO 4365-2022 Liquid flow in open channels — Sediment in streams and canals — Determination of concentration, particle size distribution and relative density
KS I ISO 14644-9-2019 Cleanrooms and associated controlled environments — Part 9:Classification of surface cleanliness by particle concentration
KS I ISO 14644-1-2017 Cleanrooms and associated controlled environments — Part 1:Classification of air cleanliness by particle concentration
KS I ISO 14644-12-2020 Cleanrooms and associated controlled environments —Part 12: Specifications for monitoring air cleanliness by nanoscale particle concentration
KS M ISO 4119-2021 Pulps — Determination of stock concentration
KS M ISO 4119-2016 Pulps－Determination of stock concentration
KS L 6001-2022 Bonded abrasive grain sizes

Korean Agency for Technology and Standards (KATS), Particle size analyzer concentration

KS A 4048-1995 Measurementing methods of concentration of airborne radioactive particle
KS M 0107-1993 Testing methods for concentration of fine particles in highly purified water
KS I 3213-2009(2019) Testing methods for concentration of fine particles in highly purified water
KS I ISO 12141:2017 Stationary source emissions－Determination of mass concentration of particulate matter(dust) at low concentrations－Manual gravimetric method
KS I ISO 12141:2022 Stationary source emissions — Determination of mass concentration of particulate matter (dust) at low concentrations — Manual gravimetric method
KS I ISO 9096:2009 Stationary source emissions－Manual determination of mass concentration of particulate matter
KS A ISO 10980:2012 Validation of the strength of reference solutions used for measuring concentrations
KS I ISO 9096:2020 Stationary source emissions — Manual determination of mass concentration of particulate matter
KS I ISO 12141:2007 Stationary source emissions－Determination of mass concentration of particulate matter(dust) at low concentrations－Manual gravimetric method
KS B ISO 4365:2022 Liquid flow in open channels — Sediment in streams and canals — Determination of concentration, particle size distribution and relative density
KS I ISO 14644-9:2014 Cleanrooms and associated controlled environments — Part 9: Classification of surface cleanliness by particle concentration
KS I ISO 14644-9:2019 Cleanrooms and associated controlled environments — Part 9:Classification of surface cleanliness by particle concentration
KS I ISO 14644-1-2017(2022) Cleanrooms and associated controlled environments — Part 1:Classification of air cleanliness by particle concentration
KS L 6001-2002 Bonded abrasive grain sizes
KS L 6001-1982 Bonded abrasive grain sizes
KS P 6124-2006 Oxygen analyzers for medical use
KS L ISO 6344-1:2005 Coated abrasives-Grain size analysis-Part 1:Grain size distribution test
KS C 9701-1987 Diagnostic Audiometers
KS C IEC 61034-1:2008 Measurement of smoke density of cables burning under defined conditions－Part 1：Test apparatus
KS I ISO 14644-12:2020 Cleanrooms and associated controlled environments —Part 12: Specifications for monitoring air cleanliness by nanoscale particle concentration
KS L ISO 6344-1-2005(2010) Coated abrasives－Grain size analysis－Part 1：Grain size distribution test
KS M ISO 4119:2006 Pulps-Determination of stock concentration
KS M ISO 4119:2016 Pulps－Determination of stock concentration
KS M ISO 4119:2021 Pulps — Determination of stock concentration
KS L 6522-2016(2021) Coated abrasives－Grain sizes
KS I ISO 13271-2014(2019) Stationary source emissions — Determination of PM10/PM2.5 mass concentration in flue gas — Measurement at higher concentrations by use of virtual impactors
KS D 0046-2002 Methods of sampling for size analysis of ferroalloys and size determination
KS R 5036-1986 Reflection type smokemeters for measuring carbon concentration of exhaust smoke for diesel automobiles
KS A ISO 10980-2012(2017) Validation of the strength of reference solutions used for measuring concentrations
KS A ISO 10980-2012(2022) Validation of the strength of reference solutions used for measuring concentrations
KS B ISO 8573-8-2005(2010) Compressed air－Part 8：Test methods for solid particle content by mass concentration
KS K 0908-2011 Standard depths of shade NO. 1
KS M ISO 125:2010 Natural rubber latex concentrate-Determination of alkalinity
KS M 2105-2005 Methods of measuring dust concentration in flue gas
KS M ISO 125:2015 Natural rubber latex concentrate－Determination of alkalinity
KS D 4121-2009 TESTING METHOD OF CAST SHOT AND GRIT GRAIN SIZE

Institute of Environmental Sciences and Technology, Particle size analyzer concentration

IEST G-CC1002-1999 Determination of the Concentration of Airborne Ultrafine Particles

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Particle size analyzer concentration

GB/T 41949-2022 Particle─Laser particle size analyser─Technical requirements
GB/T 6167.2-1985 Methods for testing the performance of dust particle counter--Particle concentration
GB/T 42660-2023 Calibration of aerosol particle number concentration condensation nuclei particle counters
GB/T 13277.8-2023 Compressed air part 8: Methods of measurement of mass concentration of solid particles
GB 8240-1987 Marine oil content meter
GB/T 11859.1-1989 Strong aromatic Chinese spirits of low concentration
GB/T 22231-2008 Particle Size Distribution/Fiber Length and Diameter Distribution
GB/T 5399-2004 Pulps-Determination of stock concentration
GB/T 189-1997 Classification standard for size fractions of coal
GB/T 9258.1-2000 Coated abrasives-Grain size analysis-Part 1: Grain size distribution test
GB/T 6288-1986 Determination of particle size for granular molecular sieve
GB 6288-1986 Determiantion of particle size for granular molecular sieve
GB/T 25915.14-2022 Cleanrooms and Related Controlled Environments Part 14: Assessing Equipment Suitability by Particle Concentration
GB/T 16146-1995 Standards for controlling radon concentration in dwellings
GB/T 6921-1986 Determination of the concentration of airborne particulate matters
GB/T 5399-1985 Pulp--Determination of stock concentration--Rapid method
GB/T 29025-2012 Determination of particle size distributions.Electrical sensing zone method
GB/T 42348-2023 Particle Size Analysis Particle Tracking Analysis (PTA)

Association of German Mechanical Engineers, Particle size analyzer concentration

VDI 3867 Blatt 5-2013 Measurement of particles in ambient air - Determination of the particle number concentration and particle size distribution of aerosols - Time-of-flight spectrometer
VDI 3867 Blatt 4-2011 Measurement of particles in ambient air - Determination of the particle number concentration and particle size distribution of aerosols - Optical aerosol spectrometer
VDI 3867 Blatt 3-2012 Measurement of particles in ambient air - Determination of the particle number concentration and number size distribution of aerosols - Electrical mobility spectrometer
VDI 2463 Blatt 1-1999 Particulate matter measurement - Gravimetric determination of mass concentration of suspended particulate matter in ambient air - General principles
VDI 3867 Blatt 2-2008 Measurement of particulate matter in ambient air - Methods for characterizing test aerosols - Determination of the particle number concentration and particle size distribution - Condensation Particle Counter (CPC)
VDI 2083 Blatt 8.1-2014 Cleanroom technology - Air cleanliness chemical concentration (ACC)
VDI 2310 Blatt 12-2004 Maximum ambient concentrations referring to human health - Maximum ambient concentrations for nitrogen dioxide
VDI 3867 Blatt 1-2009 Measurement of particulate matter in ambient air - Determination of the particle number concentration and number size distribution of aerosols - Fundamentals

National Metrological Technical Specifications of the People's Republic of China, Particle size analyzer concentration

JJF 1659-2017 Calibration Specification for PM2.5 Mass Concentration Measurement Instruments
JJF 1716-2018 Program of Pattern Evaluation of Dust Concentration Measuring Instruments
JJF 1211-2008 Calibration Specification for Static Light Scattering Particle Size Analyzers
JJF 1348-2012 Program of Pattern Evaluation of Analyzers for Oil Content in Water
JJF(机械) 1075-2021 Calibration specification for single particle compressive strength tester
JJF(机械)1075-2021
JJF 1074-2018 Measurement Tables for Density-Concentration of Alcohal
JJF 1074-2001 Measurement Tables for Density - Concentration of Alcohol

American Society for Testing and Materials (ASTM), Particle size analyzer concentration

ASTM D8049-17 Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Particle Analyzer
ASTM D8049-16 Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Particle Analyzer
ASTM D6331-14 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations &40;Manual Gravimetric Method&41;
ASTM D7651-10 Standard Test Method for Gravimetric Measurement of Particulate Concentration of Hydrogen Fuel
ASTM D7651-17 Standard Test Method for Gravimetric Measurement of Particulate Concentration of Hydrogen Fuel
ASTM E2776-18 Standard Guide for Correlation of Results of Solid Particle Size Measurement Instruments
ASTM E2776-20 Standard Guide for Correlation of Results of Solid Particle Size Measurement Instruments
ASTM C1514-08 Standard Test Method for Measurement of ²³⁵U Fraction Using Enrichment Meter Principle
ASTM D7512-09 Standard Guide for Monitoring of Suspended-Sediment Concentration in Open Channel Flow Using Optical Instrumentation
ASTM D8049-16a Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Particle Analyzer
ASTM D8489-23 Test Method for Determination of Microplastics Particle and Fiber Size, Distribution, Shape, and Concentration in Waters with High to Low Suspended Solids Using a Dynamic Image Particle Size and Shape
ASTM D8489-23e1 Standard Test Method for Determination of Microplastics Particle and Fiber Size, Distribution, Shape, and Concentration in Waters with High to Low Suspended Solids Using a Dynamic Image Particle Size

AENOR, Particle size analyzer concentration

UNE-ISO 12141:2006 Stationary source emissions -- Determination of mass concentration of particulate matter (dust) at low concentrations -- Manual gravimetric method (ISO 12141:2002)
UNE-ISO 9096:2005 Stationary source emissions -- Manual determination of mass concentration of particulate matter
UNE-EN 16450:2017 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5)
UNE-EN ISO 14644-9:2014 Cleanrooms and associated controlled environments - Part 9: Classification of surface cleanliness by particle concentration (ISO 14644-9:2012)
UNE-EN 13205-4:2015 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4: Laboratory performance test based on comparison of concentrations
UNE 40261-4:1975 THRESHOLD OF CONFIDENCE OF THE CONCENTRATION VALUES.
UNE-EN 12341:2015 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
UNE 30062:1956 ANALYSIS REAGENTS. ALCOOL ETHYLIQUE OF 95%.

ES-UNE, Particle size analyzer concentration

ISO/TS 24672:2023 Nanotechnologies — Guidance on the measurement of nanoparticle number concentration
UNE-ISO 9096:2005/COR 1:2009 Stationary source emissions -- Manual determination of mass concentration of particulate matter
UNE-CEN/TS 16976:2016 Ambient air - Determination of the particle number concentration of atmospheric aerosol (Endorsed by Asociación Española de Normalización in January of 2021.)
UNE-EN ISO 14644-9:2022 Cleanrooms and associated controlled environments - Part 9: Assessment of surface cleanliness for particle concentration (ISO 14644-9:2022)
UNE-EN ISO 14644-1:2016 Cleanrooms and associated controlled environments - Part 1: Classification of air cleanliness by particle concentration (ISO 14644-1:2015)
UNE-EN IEC 61563:2021 Radiation protection instrumentation - Equipment for measuring the activity concentration of gamma-emitting radionuclides in foodstuffs (Endorsed by Asociación Española de Normalización in March of 2021.)
UNE 77219:1998 ERRATUM:2009 Stationary source emissions. Automated monitoring of mass concentrations of particles. Performance characteristics, test methods and specifications.

Taiwan Provincial Standard of the People's Republic of China, Particle size analyzer concentration

CNS 8457-1982 Oxygen Indicator and Oxygen Alum
CNS 15091-7-2007 Method of test for deep sea water - Determination of total suspended matters
CNS 8458-1982 Method of Test for Oxygen Indicator and Oxygen Alarm
CNS 11117-1984 Method for Size Analysis of Coke (Nominal Top Size Greater Than 20 mm)
CNS 11118-1984 Method for Size Analysis of Coke (Nominal Top Size 20mm or Less)
CNS 3787-1995 4
CNS 10863-1994 Method of Test for Consistency of Pulp Suspensions
CNS 11632-1986 13
CNS 10437-2000 17
CNS 12567-1989 Method of Test for Exhausts Concentration for Gasoline Engine Automobiles
CNS 8895-1982 3
CNS 7530-1995 10

API - American Petroleum Institute, Particle size analyzer concentration

API PUBL 4076-1971 EMISSIONS@ CONCENTRATIONS@ AND FATE OF PARTICULATE ATMOSPHERIC POLLUTANTS

国家市场监督管理总局、中国国家标准化管理委员会, Particle size analyzer concentration

GB/T 39193-2020 Ambient air—Determination of particulate matter mass concentration—Gravimetric method
GB/T 25915.9-2018 Cleanrooms and associated controlled environments—Part 9: Classification of surface cleanliness by particle concentration
GB/T 25915.1-2021 Cleanrooms and associated controlled environments—Part 1: Classification of air cleanliness by particle concentration
GB/T 40944-2021 Determination of feed particle size—Geometric mean diameter method
GB/T 6288-2021 Determination of particle size for granular molecular sieve
GB/T 25915.2-2021 Cleanrooms and associated controlled environments—Part 2: Monitoring to provide evidence of cleanroom performance related to air cleanliness by particle concentration

Association Francaise de Normalisation, Particle size analyzer concentration

FD CEN/TR 16013-3:2012 Exposition au poste de travail - Guide d'utilisation des instruments à lecture directe pour la surveillance des aérosols - Partie 3 : évaluation des concentrations de particules en suspension dans l'air à l'aide de photomètres
XP X43-075*XP CEN/TS 16976:2016 Ambient air - Determination of the particle number concentration of atmospheric aerosol
XP CEN/TS 16976:2016 Air ambiant - Détermination de la concentration en nombre de particules de l'aérosol atmosphérique
FD X43-711-3*FD CEN/TR 16013-3:2012 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 3 : evaluation of airborne particle concentrations using photometers
FD X43-711-2*FD CEN/TR 16013-2:2010 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2 : evaluating airborne particle concentrations using Optical Particle Counters
FD X43-070-6:2019 Air quality - Practical guidance for estimating the uncertainty of measurement on polluant concentration in ambient air - Part 6 : estimation of the uncertainties on mass concentrations of particulate matters measured automatically
NF EN ISO 14644-9:2022 Salles propres et environnements maîtrisés apparentés - Partie 9: Evaluation de la propreté des surfaces par la concentration de particules
NF X44-101-9*NF EN ISO 14644-9:2012 Cleanrooms and associated controlled environments - Part 9 : classification of surface cleanliness by particle concentration.
NF X43-133*NF EN ISO 28439:2011 Workplace atmospheres - Characterization of ultrafine aerosols/nanoaerosols - Determination of the size distribution and number concentration using differential mobility analysing systems.
NF P94-054:1991 Soils : investigation and testing. Determination of particle density. Pycnometer method.
NF EN 16450:2017 Air ambiant - Systèmes automatisés de mesurage de la concentration de matière particulaire (PM10;PM2,5)
NF X11-682:1984
XP CEN/TS 17021:2018 Émissions de sources fixes - Détermination de la concentration massique en dioxyde de soufre par des techniques instrumentales
FD X43-283-3*FD CEN/TR 13205-3:2014 Workplace exposure - Assessment of performance of instruments for measurement of airborne particle concentrations - Part 3: Analysis of sampling efficiency data
NF X44-101-1*NF EN ISO 14644-1:2016 Cleanrooms and associated controlled environments - Part 1 : classification of air cleanliness by particle concentration
NF X11-666:1984 PARTICLE SIZE ANALYSIS OF POWDERS. DIFFRACTION METHOD.
NF C19-563*NF EN IEC 61563:2021 Radiation protection instrumentation - Equipment for measuring the activity concentration of gamma-emitting radionuclides in foodstuffs
NF EN IEC 61563:2021 Instrumentation pour la radioprotection - Equipement de mesure de la concentration d'activité des radionucléides émetteurs gamma dans les aliments
NF V03-721:1994 Semolina {durum} wheat. Granulation of semolina.
NF ISO 10980:1998 Vérification du titre des solutions de référence utilisées pour la mesure des concentrations
NF X43-021*NF EN 16450:2017 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10;PM2,5)
FD CEN/TR 16013-2:2010 Exposition au poste de travail - Guide d'utilisation des instruments à lecture directe pour la surveillance des aérosols - Partie 2 : évaluation des concentrations de particules en suspension dans l'air à l'aide de compteurs optiques de particules
NF X43-283-4*NF EN 13205-4:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4 : laboratory performance test based on comparison of concentrations
XP X43-043*XP CEN/TS 17021:2018 Stationary source emissions - Determination of the mass concentration of sulphur dioxide by instrumental techniques
NF X11-632:1990 SIZE DETERMINATION. EXPRESSION FO RESULTS OF SIZE DETERMINATION.
NF X43-017:1984 Air quality. Measurement of the concentration of solid particles in ambient air. Beta ray absorption method.
XP X43-321:2018 Qualité de l'air - Émissions de sources fixes - Détermination de la concentration massique d'ammoniac par des techniques instrumentales
NF B57-011:1973 Granulés crus de liège - Analyse granulométrique.
NF E75-231-2*NF ISO 9136-2:1999 Abrasive grains - Determination of bulk density - Part 2 : microgrits.
NF E75-231-1*NF ISO 9136-1:2005 Abrasive grains - Determination of bulk density - Part 1 : macrogrits.
NF Q50-006*NF EN ISO 4119:1996 Pulps. Determination of stock concentration.
NF EN ISO 4119:1996 Pâtes - Détermination de la concentration en pâte
NF ISO 8573-8:2004 Air comprimé - Partie 8 : méthodes d'essai pour la détermination de la teneur en particules solides par concentration massique
NF M03-021:1967 Analyse granulométrique du coke
XP X43-322:2018 Air quality - Stationary source emission - Determination of the mass concentration of formaldehyde by instrumental techniques
NF X11-681:1982 Particle size analysis. Particle size analysis by gravity sedimentation. Pipette method.
X11-634:1988 Particle size analysis. Characterization of the size and form of the elements of a granular population.
NF E11-096:1987 Length measuring instruments. Depth gauges.
NF X43-049*NF EN 12341:2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
XP ISO/TS 20593:2017 Air ambiant - Détermination de la concentration en masse de particules provenant de l'usure des pneumatiques et des chaussées (TRWP) - Méthode par pyrolyse-CG/SM
NF X43-602*NF EN 16966:2018 Workplace exposure - Measurement of exposure by inhalation of nano-objects and their aggregates and agglomerates - Metrics to be used such as number concentration, surface area concentration and mass concentration
XP CEN ISO/TS 19590:2019 Nanotechnologies - Distribution granulométrique et concentration de nanoparticules inorganiques en milieu aqueux par spectrométrie de masse à plasma induit en mode particule unique
NF T42-005:2011 Natural rubber latex concentrate - Determination of alkalinity.
NF V05-001:1959 Food products. Vinegar. Determination of acetic acid concentration.
NF X11-630:2001 Particle size analysis - Vocabulary.
NF ISO 4701:1986 Minerais de fer - Détermination de la granulométrie par tamisage.

VN-TCVN, Particle size analyzer concentration

TCVN 5977-2009 Stationary source emissions.Manual determination of mass concentration of particulate matter
TCVN 5224-2009 Coke.Size analyses (Nominal top size 20 mm or less)
TCVN 5225-2007 Coke (nominal top size greater than 20 mm).Size analysis by sieving
TCVN 4198-1995 Construction earth.Gramlometric analysis

HU-MSZT, Particle size analyzer concentration

US-FCR, Particle size analyzer concentration

FCR FED H-08-4 VOL 2 235-1984 CONC. WHEEL STOPS
FCR FED H-08-4 VOL 2 240-1984 CONC. PEDESTRIAN PAVEMENT

Professional Standard - Coal, Particle size analyzer concentration

MT 163-1997 General technical condition for direct reading instrument for dust concentration measurement
MT/T 163-1997 General technical condition for direct reading instrument for dust concentration measurement
MT/T 1102-2009 Coal mine dust concentration transducer

国家煤矿安全监察局, Particle size analyzer concentration

MT/T 163-2019 General technical conditions for direct-reading dust concentration measuring instruments
MT 79-1984 Methods for determination of dust concentration and dispersion

AT-ON, Particle size analyzer concentration

ONORM M 5861-1-1993 Manual determination of particle concentrations in fluid gases - Gravimetrie method - General requirements
ONORM M 9418-2001 Automatic concentration measuring instruments for carbon monoxide in garages - Specifications and testing
ONORM M 5861-2-1994 Manual determination of particle concentrations in fluid gases - Gravimetrie method - Special requirements regarding measurement techniques
ONORM M 9405-1993 Determination of asbestos concentration in air Dosage des concentrations d'amiante dans l'air

Professional Standard - Electricity, Particle size analyzer concentration

DL/T 1915-2018 Gravimetric method for testing technical specifications of low-concentration particulate matter in thermal power plants

International Electrotechnical Commission (IEC), Particle size analyzer concentration

IEC 61563:2019 Radiation protection instrumentation - Equipment for measuring the activity concentration of gamma-emitting radionuclides in foodstuffs
IEC 61034-1:1990 Measurement of smoke density of electric cables burning under defined conditions; part 1: test apparatus

YU-JUS, Particle size analyzer concentration

JUS K.F0.005-1989 Gralns of fused alumiuium oxide and silicon carbide for boodod abrasivc products. Particle si?e measurement of microgrfts by Eppendorf - photosedimentometer
JUS H.B8.252-1983 Methanol for industnal use. Evaluation of methanol concentration by measurement of density
JUS K.F0.001-1989 Grain si7.es of fused alumlnium oxlde and sIlicon carbide for bonded abrasive products. ?esignaticm and graJn slze distribution

CH-SNV, Particle size analyzer concentration

RU-GOST R, Particle size analyzer concentration

GOST R ISO 9096-2006 Stationary source emissions. Manual determination of mass concentration of particulate matter
GOST R ISO 14644-1-2017 Cleanrooms and associated controlled environments. Part 1. Classification of air cleanliness by particle concentration
GOST R ISO 14644-1-2000 Cleanrooms and associated controlled environments. Part 1. Classification of air cleanliness
GOST R ISO 14644-9-2013 Cleanrooms and associated controlled environments. Part 9. Classification of surface cleanliness by particle concentration
GOST 25645.136-1986 Solar wind. Composition, particle concentration and velocity
GOST 13005-1967 Interferometers for determination of liqnid and gas concentration. Methods and means for verification
GOST R 50632-1993 High-strength hydrogen peroxide. Specifications
GOST 18294-2004 Drinking water. Method for determination of beryllium content
GOST 15113.5-1977 Food concentrates. Methods for determination of acidity
GOST 18294-1989 Drinking water. Method for determination of berillium mass concentration
GOST ISO 4150-2015 Green coffee. Particle-size analysis
GOST ISO 8840-2014 Refractory materials. Determination of bulk density of granular materials (grain density)
GOST 27198-1987 Fresh grapes. Methods for determination of mass concentration of sugars

Hebei Provincial Standard of the People's Republic of China, Particle size analyzer concentration

DB13/T 2375-2016 Gravimetric method for determination of low-concentration particulate matter in exhaust gas from stationary pollution sources

ES-AENOR, Particle size analyzer concentration

Professional Standard - Military and Civilian Products, Particle size analyzer concentration

WJ 2276-1995 Verification rules for activated carbon and impregnated carbon particle size analyzer

BR-ABNT, Particle size analyzer concentration

ABNT MB-137R-1954

CU-NC, Particle size analyzer concentration

NC 44-12-12-1985 Ores. Copper Conoentrates Photometric Deterraination of Arsenic
NC 23-02-1968 Evaluation of sulphuric acid concentration by measurement of density
NC 10-72-1988 Metallurgy. Determination of Compression Strength. Testing Method

Qinghai Provincial Standard of the People's Republic of China, Particle size analyzer concentration

DB63/T 1873-2020 Determination of low-concentration particulate matter in exhaust gas from stationary pollution sources β-ray method

Liaoning Provincial Standard of the People's Republic of China, Particle size analyzer concentration

DB21/T 3270-2020 Determination of low-concentration particulate matter in exhaust gas from stationary pollution sources β-ray method
DB21/T 3595-2022 Level of Ground Ozone Concentration

Shandong Provincial Standard of the People's Republic of China, Particle size analyzer concentration

DB37/T 3785-2019 Determination of low-concentration particulate matter in exhaust gas from stationary pollution sources β-ray method
DB37/T 2537-2014 Gravimetric method for determination of low-concentration particulate matter in exhaust gas from stationary pollution sources in Shandong Province

Jiangxi Provincial Standard of the People's Republic of China, Particle size analyzer concentration

DB36/T 1386-2021 Determination of low-concentration particulate matter in exhaust gas from stationary pollution sources β-ray method

Inner Mongolia Provincial Standard of the People's Republic of China, Particle size analyzer concentration

DB15/T 2362-2021 Determination of low-concentration particulate matter in exhaust gas from stationary pollution sources β-ray method

Jilin Provincial Standard of the People's Republic of China, Particle size analyzer concentration

DB22/T 3426-2023 Determination of low-concentration particulate matter in exhaust gas from stationary pollution sources β-ray method

TN-INNORPI, Particle size analyzer concentration

NT 14.29-1983

Professional Standard - Ferrous Metallurgy, Particle size analyzer concentration

YB 5002-1987 High Concentration Pinitol Oil

UNKNOWN, Particle size analyzer concentration

YB 5002-87

PH-BPS, Particle size analyzer concentration

PNS ISO 14644-9:2021 Cleanrooms and associated controlled environments - Part 9: Classification of surface cleanliness by particle concentration
PNS ISO 14644-12:2021 Cleanrooms and associated controlled environments - Part 12: Specifications for monitoring air cleanliness by nanoscale particle concentration
PNS ISO 6344-3:2021 Coated abrasives - Grain size analysis - Part 3: Determination of grain size distribution of microgrits P240 to P2500

Canadian General Standards Board （CGSB), Particle size analyzer concentration

CGSB 1-GP-71 METH 4.7-1974 Methods of Testing Paints and Pigments Consistency Consistency of Putty by Means of Gardner Mobilometer

国家药监局, Particle size analyzer concentration

YY/T 1726-2020 Concentration gradient agar diffusion drug sensitivity strips

North Atlantic Treaty Organization Standards Agency, Particle size analyzer concentration

STANAG 3713-2008 DETERMINATION OF PARTICULATE MATTER IN AEROSPACE HYDRAULIC FLUIDS USING A PARTICLE SIZE ANALYSER

Standard Association of Australia （SAA）, Particle size analyzer concentration

AS 4215.1:1995 Methods of test for determining fire extinguishing and inerting concentrations for flammable liquids and gases - Determination of fire extinguishing concentrations
AS 4215.2:1995 Methods of test for determining fire extinguishing and inerting concentrations for flammable liquids and gases - Determination of fire inerting concentrations
AS ISO 14644.1:2017 Cleanrooms and associated controlled environments, Part 1: Classification of air cleanliness by particle concentration
AS 2917.1:1994 Copper sulfide concentrates - Determination of copper content - Titrimetric methods

Occupational Health Standard of the People's Republic of China, Particle size analyzer concentration

GBZ/T 192.6-2018 Determination of dust in the air of workplaces - Part 6: Ultrafine particles and total fine particle concentration

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Particle size analyzer concentration

ASHRAE 4606-2003 Validation of a CFD Model for Temperature and Particulate Concentration in a Test Room with Mixed Air and Displacement Ventilation

Professional Standard - Agriculture, Particle size analyzer concentration

2354药典二部-2010 APPENDIX IX E DETERMINATION OF PARTICLE SIZE AND PARTICLE SIZE DISTRIBUTION
218药典三部-2020 Physical examination method 0982 Particle size and particle size distribution method
124药典四部-2020 0900 Characteristic inspection method 0982 Particle size and particle size distribution measurement method
143药典四部-2015 0900 Characteristic inspection method 0982 Particle size and particle size distribution measurement method
GB/T 189-1963 Coal Size Classification
199药典三部-2015 Physical inspection method 0982 General rules for particle size and particle size distribution determination method 47

European Committee for Electrotechnical Standardization（CENELEC）, Particle size analyzer concentration

EN IEC 61563:2021 Radiation protection instrumentation - Equipment for measuring the activity concentration of gamma-emitting radionuclides in foodstuffs

NATO - North Atlantic Treaty Organization, Particle size analyzer concentration

STANAG 3713-1990 Determination of Particulate Matter in Aerospace Hydraulic Fluids Using a Particle Size Analyser (ED 3 AMD 1; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +

IN-BIS, Particle size analyzer concentration

Professional Standard-Ships, Particle size analyzer concentration

CB/T 1033-1999 Marine oil content meter

RO-ASRO, Particle size analyzer concentration

STAS 6419-1970 Elcclrical moasurinfi apparalus DIA1.S AND GRADUATlin SCALES
STAS 9136-1980 COKE Grain size analysis
STAS 9464-1981 Organic dyestufis OPTICAL BLEACHING AGENT Determination of concentration by the spectrophotometry method
STAS 8170/1-1980 ORGANIC DYES Determination of delivery concentration by spectroiphotometric method
STAS SR 8934-4-1997 Sodium chloride. Grain size determination
STAS 9144/7-1972 ZING POWDER Granulometric analysis

GOSTR, Particle size analyzer concentration

GOST R ISO 14644-12-2020 Cleanrooms and associated controlled environments. Part 12. Specifications for monitoring air cleanliness b nanoscale particle concentration

CEN - European Committee for Standardization, Particle size analyzer concentration

EN 16450:2017 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2@5)
PREN 13205-2010 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations
PREN 17042-2016 Fertilizers - Determination of boron in concentrations > 10 % using acidimetric titration
EN 16966:2018 Workplace exposure - Measurement of exposure by inhalation of nano-objects and their aggregates and agglomerates - Metrics to be used such as number concentration@ surface area concentration and mass concentration

Hubei Provincial Standard of the People's Republic of China, Particle size analyzer concentration

DB42/T 1904-2022 Portable β-ray method for the determination of low-concentration particulate matter in exhaust gas from stationary pollution sources

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Particle size analyzer concentration

GB/T 34790-2017 Inspenction of grain and oils—Determination of water activity of grains—Instrumental method
GB/T 34796-2017 Quantification and purity analysis of nucleic acid concentration in solution—Ultraviolet spectrophotometry

Society of Automotive Engineers (SAE), Particle size analyzer concentration

SAE J391-2011 Definition for Particle Size
SAE AMS3310-1997 Rubber, Silicone - Flame Retardant, Low Smoke Density, High Strength 65 - 75 Durometer Color White
SAE J989-1968 CARBON MONOXIDE CONCENTRATION TEST PROCEDURE

CN-GJB-H, Particle size analyzer concentration

GJB 7121-2011 Specification for oxygen indicator

Professional Standard - Machinery, Particle size analyzer concentration

JB/T 10028-1999 Roundness measuring instrument
JB/T 3168.2-1999 Alloy powder for welding.Determination of hardness and partcle size

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Particle size analyzer concentration

GJB 5384.22-2005 Test methods of performance for pyrotechnic composition Part 21: Concentration determination of solid smoke particles quantities Electron microscope method

Military Standard of the People's Republic of China-General Armament Department, Particle size analyzer concentration

GJB 8684.22-2015 Test methods for pyrotechnic properties - Part 22: Determination of smoke solid particle number concentration by electron microscopy
GJB 6370-2008 Specification for high concentration hydrogen peroxide

PL-PKN, Particle size analyzer concentration

PN P50094-1986 Pulps Determination of stock Nconcentration
PN C87007-16-1993 Calcium fertilizes Determination of grainsize

Indonesia Standards, Particle size analyzer concentration

SNI ISO 4119:2014 Pulps - Determination of stock concentration

IPC - Association Connecting Electronics Industries, Particle size analyzer concentration

IPC TM-650 2.3.35.2A-2004 Fluoride Concentration@ Fluxes - Quanitative
IPC TM-650 2.3.35.2-1995 Fluoride Concentration@ Fluxes - Quanitative

未注明发布机构, Particle size analyzer concentration

BS EN ISO 4119:1996(1999) Pulps — Determination ofstock concentration

国家煤炭工业局, Particle size analyzer concentration

MT/T 792-1998 Determination method of coal water slurry concentration

ZA-SANS, Particle size analyzer concentration

SANS 6079:1983 Size analysis of coal
SANS 5844:2006 Particle and relative densities of aggregates

US-CFR-file, Particle size analyzer concentration

CFR 12-251.3-2014 Banks and banking. Part251:Concentration limit (Regulation XX). Section251.3:Concentration limit.

Professional Standard - Light Industry, Particle size analyzer concentration

QB 1057-1991 Burst Tester

Professional Standard - Meteorology, Particle size analyzer concentration

QX/T 32-2005 Temperature grads automatic measuring instrument

FI-SFS, Particle size analyzer concentration

NORDEST NT FIRE 011-1980

Professional Standard - Traffic, Particle size analyzer concentration

JT/T 2014-1990 Method for Determination of Port Dust Concentration

(U.S.) Ford Automotive Standards, Particle size analyzer concentration

FORD FLTM BO 004-01-2001 PARTICLE SIZE TEST FOR RESINS

BE-NBN, Particle size analyzer concentration

NBN M 02-011-1988 Hard coal - Size analysis

SAE - SAE International, Particle size analyzer concentration

SAE J418-1983 Grain Size Determination of Steels
SAE J418-1999 Grain Size Determination of Steels

Professional Standard - Chemical Industry, Particle size analyzer concentration

HG/T 2223-1991 Particle Size Determination of Granular Double Superphosphate