ZH
RU
ES

Polar and Nonpolar Components

Polar and Nonpolar Components, Total:496 items.

In the international standard classification, Polar and Nonpolar Components involves: Aircraft and space vehicles in general, Welding, brazing and soldering, Food products in general, General methods of tests and analysis for food products, Lamps and related equipment, Protection of and in buildings, Earthworks. Excavations. Foundation construction. Underground works, Galvanic cells and batteries, Lifting equipment, Electrical engineering in general, Farming and forestry, Structures of buildings, Optoelectronics. Laser equipment, Alarm and warning systems, Surface treatment and coating, Non-ferrous metals, Rotating machinery, Production of metals, Measurement of volume, mass, density, viscosity, Electrical equipment for working in special conditions, Fasteners, Road vehicle systems, Telecommunication systems, Flexible drives and transmissions, Open systems interconnection (OSI), Products of the chemical industry, Audio, video and audiovisual engineering, Aerospace fluid systems and components, Radiation measurements, Soil quality. Pedology, Components and accessories for telecommunications equipment, Bearings, Vocabularies, Paints and varnishes, Electronic tubes, Petroleum, petroleum products and natural gas handling equipment, Fibre optic communications, Refrigerating technology, Packaging machinery, Environmental testing, Aids for disabled or handicapped persons, Non-destructive testing, Solar energy engineering, Motor cycles and mopeds, Medical equipment, Water quality, Road engineering, Electronic display devices, Construction materials, Meat, meat products and other animal produce, Materials for aerospace construction, Components for electrical equipment, Electrical wires and cables, Pipeline components and pipelines, Nuclear energy engineering, Electromagnetic compatibility (EMC), Adhesives, Printed circuits and boards, Non-metalliferous minerals, Microbiology, Transformers. Reactors, Rectifiers. Convertors. Stabilized power supply, Packaging materials and accessories, Components for aerospace construction, Iron and steel products.


CZ-CSN, Polar and Nonpolar Components

  • CSN 36 4175-1965 Alkaline mercury cells and batteries
  • CSN 75 7952-1987 Chomical and physical analysia of sludges. Determmation of oil products — — non-polar hydroearbons
  • CSN 68 1144-1994 Testing methods for surfactans and detergents. Determination of non-sulfophonated and non-sulphonated fractions
  • CSN P 16 5110-1999 Secure storage units - Classification for high security locks according to their resistance to unauthorized opening

Defense Logistics Agency, Polar and Nonpolar Components

未注明发布机构, Polar and Nonpolar Components

  • BS 7310:1990(2012) Specification for Ion - selective electrodes, reference electrodes, combination electrodes and ion - selective electrode meters for determination of ions in solution
  • BS EN IEC 62561-2:2018(2019) Lightning protection system components (LPSC) Part 2 : Requirements for conductors and earth electrodes
  • BS EN IEC 63115-1:2020 Secondary cells and batteries containing alkaline or other non - acid electrolytes — Sealed nickel - metal hydride cells and batteries for use in industrial applications Part 1 : Performance
  • BS EN 61951-1:2017 Secondary cells and batteries containing alkaline or other non - acid electrolytes - Secondary sealed cells and batteries for portable applications Part 1 : Nickel - Cadmium
  • BS 8290-2:1991(1999) Suspended ceilings — Part 2 : Specification for performance of components and assemblies
  • BS 6501-2:1991(1999) Flexible metallic hose assemblies — Part 2 : Specification for strip wound hoses and hose assemblies
  • BS 6130-1:1993(2007) Hose and hose assemblies for asphalt and bitumen — Part 1 : Specification for flexible metallic hose and hose assemblies
  • JIS K 6794-4:2023 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -- Determination of the resistance to internal pressure -- Part 4: Preparation of assemblies
  • BS 5760-20:1997(1998)*IEC 300-3-4:1996 Reliability of systems, equipment and components — Part 20 : Guide to the specification of dependability requirements
  • BS 5760-5:1991(1999) Reliability of systems, equipment and components — Part 5 : Guide to failure modes, effects and criticality analysis (FMEA and FMECA)

Korean Agency for Technology and Standards (KATS), Polar and Nonpolar Components

  • KS B ISO 14171:2019 Welding consumables — Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels — Classification
  • KS B ISO 6848-2016(2021) Arc welding and cutting－Nonconsumable tungsten electrodes－Classification
  • KS B ISO 24598:2008 Welding consumables-Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of creep-resisting steels-Classification
  • KS B ISO 24598:2018 Welding consumables — Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of creep-resisting steels — Classification
  • KS C IEC 62561-5-2014(2019) Lightning protection system components(LPSC) — Part 5: Requirements for earth electrode inspection housings and earth electrode seals
  • KS C IEC 62561-2-2014(2019) Lightning protection system components(LPSC) — Part 2: Requirements for conductors and earth electrodes
  • KS R ISO 8092-4:2003 Road vehicles-Connections for on-board electrical wiring harnesses-Part 4:Pins for single-pole and multi-pole connections-Dimensions and specific requirements
  • KS R ISO 8092-4:2014 Road vehicles — Connections for on-board electrical wiring harnesses — Part 4: Pins for single- and multi-pole connections — Dimensions and specific requirements
  • KS C IEC 61779-4:2003 Electrical apparatus for the detection and measurement of flammable gases－ Part 4：Performance requirements for groupⅡapparatus indicating a volume fraction up to 100% lower explosive limit
  • KS C IEC 61951-1:2021 Secondary cells and batteries containing alkaline or other non-acid electrolytes — Secondary sealed cells and batteries for portable applications — Part 1: Nickel-cadmium
  • KS X 3104-1995(2021) 26-pole interface connector mateability dimensions and contact number assignments
  • KS B ISO 9692-3:2004 Welding and allied processes-Recommendations for joint preparation-Part 3:Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys
  • KS C IEC 60721-3-7:2022 Classification of environmental conditions —Part 3-7: Classification of groups of environmental parameters and their severities — Portable and non-stationary use
  • KS R 6100-4-2022 Swappable common-use battery pack for electric motorcycles — Part 4: Test methods for performance, safety and reliability of battery pack
  • KS C IEC 60151-1-2004(2009) Measurements of the electrical properties of electronic tubes and valves－Part 1：Measurement of electrode current
  • KS R IEC 60254-2:2019 Lead-acid traction batteries — Part 2: Dimensions of cells and terminals and marking of polarity on cells
  • KS R ISO 8092-3:2003 Road vehicles－Connections for on－board electrical wiring harnesses－ Part 3：Tabs for multi－pole connections－Dimensions and specific requirements
  • KS C IEC 60424-3-2017(2022) Ferrite cores－Guide on the limits of surface irregularities－Part 3：ETD-cores and E-cores
  • KS C IEC 60966-2-2:2014 Radio frequency and coaxial cable assemblies — Part 2-2: Blank detail specification for flexible coaxial cable assemblies
  • KS M ISO 1167-3-2014(2019) Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 3: Preparation of components
  • KS R ISO 8092-1:2003 Road vehicles-Connections for on-board electrical wiring harnesses- Part 1:Tabs for single-pole connections-Dimensions and specific requirements
  • KS R ISO 8092-1:2014 Road vehicles — Connections for on-board electrical wiring harnesses — Part 1: Tabs for single-pole connections — Dimensions and specific requirements
  • KS C IEC 60966-4-1:2014 Radio frequency and coaxial cable assemblies — Part 4-1: Blank detail specification for semi-rigid coaxial cable assemblies
  • KS C IEC 60966-4-1-2014(2019) Radio frequency and coaxial cable assemblies — Part 4-1: Blank detail specification for semi-rigid coaxial cable assemblies
  • KS C IEC 62341-5-2007(2022) Organic light emitting diode(OLED) displays－Part 5：Environmental and mechanical reliability test methods
  • KS C IEC 62341-5-2007(2017) Organic light emitting diode(OLED) displays－Part 5：Environmental and mechanical reliability test methods
  • KS C IEC 63093-1:2022 Ferrite cores — Guidelines on dimensions and the limits of surface irregularities — Part 1: General specification
  • KS C IEC 62259:2021 Secondary cells and batteries containing alkaline or other non-acid electrolytes — Nickel-cadmium prismatic secondary single cells with partial gas recombination

KR-KS, Polar and Nonpolar Components

  • KS B ISO 14171-2019 Welding consumables — Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels — Classification
  • KS B ISO 6848-2016 Arc welding and cutting－Nonconsumable tungsten electrodes－Classification
  • KS B ISO 26304-2016 Welding consumables — Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels — Classification
  • KS B ISO 24598-2018 Welding consumables — Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of creep-resisting steels — Classification
  • KS C IEC 61951-1-2021 Secondary cells and batteries containing alkaline or other non-acid electrolytes — Secondary sealed cells and batteries for portable applications — Part 1: Nickel-cadmium
  • KS C IEC 60721-3-7-2022 Classification of environmental conditions —Part 3-7: Classification of groups of environmental parameters and their severities — Portable and non-stationary use
  • KS B ISO 18563-3-2017 Non-destructive testing — Characterization and verification of ultrasonic phased array equipment — Part 3: Combined systems
  • KS R IEC 60254-2-2019 Lead-acid traction batteries — Part 2: Dimensions of cells and terminals and marking of polarity on cells
  • KS C IEC 63093-1-2022 Ferrite cores — Guidelines on dimensions and the limits of surface irregularities — Part 1: General specification
  • KS C IEC 62259-2021 Secondary cells and batteries containing alkaline or other non-acid electrolytes — Nickel-cadmium prismatic secondary single cells with partial gas recombination

PH-BPS, Polar and Nonpolar Components

  • PNS ISO 6848:2021 Arc welding and cutting - Nonconsumable tungsten electrodes - Classification

Danish Standards Foundation, Polar and Nonpolar Components

  • DS/EN ISO 6848:2005 Arc welding and cutting - Nonconsumable tungsten electrodes - Classification
  • DS/EN 62561-5:2011 Lightning protection system components (LPSC) - Part 5: Requirements for earth electrode inspection housings and earth electrode seals
  • DS/EN 62561-2:2012 Lightning Protection System Components (LPSC) - Part 2: Requirements for conductors and earth electrodes
  • DS/EN 15048-2:2007 Non-preloaded structural bolting assemblies - Part 2: Suitability test
  • DS/EN 13631-7:2004 Explosives for civil uses - High explosives - Part 7: Determination of safety and reliability at extreme temperatures
  • DS/EN 62259:2004 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Nickel-cadmium prismatic secondary single cells with partial gas recombination
  • DS/EN ISO 636:2008 Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification
  • DS/EN 17432:2021 Packaged refrigerating units for walk-in cold rooms – Classification, performance and energy consumption testing
  • DS/EN IEC 63115-2:2021 Secondary cells and batteries containing alkaline or other non-acid electrolytes – Sealed nickel-metal hydride cells and batteries for use in industrial applications – Part 2: Safety
  • DS/ISO/TR 20342-7:2021 Assistive products for tissue integrity when lying down – Part 7: Foam properties, characteristics and performance
  • DS/EN 60721-3-7/A1:1998 Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 7: Portable and non-stationary use
  • DS/EN 60721-3-7:1996 Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 7: Portable and non-stationary use
  • DS/EN 15425:2008 Adhesives - One component polyurethane for load bearing timber structures - Classification and performance requirements
  • DS/EN 61951-1/A1:2006 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Portable sealed rechargeable single cells - Part 1: Nickel-cadmium
  • DS/EN 61951-1:2003 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Portable sealed rechargeable single cells - Part 1: Nickel-cadmium

GOSTR, Polar and Nonpolar Components

  • GOST ISO 6848-2020 Arc welding and cutting. Nonconsumable tungsten electrodes. Classification
  • GOST R IEC 62561.5-2014 Lightning protection system components. Part 5. Requirements for earth electrode inspection housings and earth electrode seals
  • GOST R IEC 62561.2-2014 Lightning protection system components (LPSC). Part 2. Requirements for conductors and earth electrodes
  • GOST R 59077-2020 Soil quality. Environmental availability of non-polar organic compounds. Determination of the potential bioavailable fraction and the non-bioavailable fraction using a strong adsorbent or complexing agent
  • GOST R IEC 63115-1-2020 Secondary cells and batteries containing alkaline or other non-acid electrolytes. Secondary sealed nickel-metal hydride cells and batteries for use in industrial applications. Part 1. Labeling and designation requirements. Performance test methods
  • PNST 497-2020 Secondary cells and batteries containing alkaline or other non-acid electrolytes. Secondary sealed nickel-metal hydride cells and batteries for use in industrial applications. Part 2. Safety requirements and test methods
  • GOST R IEC 61960-4-2020 Secondary cells and batteries containing alkaline or other non-acid electrolytes. Secondary lithium cells and batteries for portable applications. Part 4. Coin secondary lithium cells, and batteries made from them

Association Francaise de Normalisation, Polar and Nonpolar Components

  • NF A81-011*NF EN ISO 6848:2015 Arc welding and cutting - Nonconsumable tungsten electrodes - Classification
  • NF E52-013-2*NF EN 13001-3-2:2014 Cranes - General design - Part 3-2 : limit states and proof of competence of wire ropes in reeving systems
  • NF C58-542*NF EN 60254-2:2008 Lead-acid traction batteries - Part 2 : dimensions of cells and terminals and marking of polarity on cells
  • NF C17-153-5*NF EN 62561-5:2017 Lightning protection system components (LPSC) - Part 5 : requirements for earth electrode inspection housings and earth electrode seals
  • NF C17-153-2*NF EN IEC 62561-2:2018 Lightning protection system components (LPSC) - Part 2 : requirements for conductors and earth electrodes
  • NF EN IEC 62561-2:2018 Composants des systèmes de protection contre la foudre (CSPF) - Partie 2 : exigences pour les conducteurs et les électrodes de terre
  • NF E25-802-2*NF EN 15048-2:2016 Non-preloaded structural bolting assemblies - Part 2 : fitness for purpose
  • NF EN 62561-5:2017 Composants de système de protection contre la foudre (CSPF) - Partie 5 : exigences pour les regards de visite et les joints d'étanchéité des électrodes de terre
  • NF EN 13053:2019 Ventilation des bâtiments - Centrales de traitement d'air - Classification et performance des unités, composants et sections
  • NF EN 17432:2021 Groupes frigorifiques prêts à monter pour chambres froides - Classification, performance et essai de consommation d'énergie
  • NF C58-562:1997 Portable lead-acid cells and batteries (Valve-regulated types). Part 2 : dimensions, terminals and marking.
  • NF T70-631-7*NF EN 13631-7:2004 Explosives for civil uses - High explosives - Part 7 : determination of safety and reliability at extreme temperatures
  • NF EN 13631-7:2004 Explosifs à usage civil - Explosifs - Partie 7 : détermination de la sécurité et de la fiabilité aux températures extrêmes
  • NF A81-325*NF EN ISO 636:2017 Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification
  • NF C93-584-3:2004 Radio frequency and coaxial cable assemblies - Part 3 : sectional specification for semi-flexible coaxial cable assemblies.
  • NF C93-584-3*NF EN 60966-3:2015 Radio frequency and coaxial cable assemblies - Part 3 : sectional specification for semi-flexible coaxial cable assemblies
  • NF EN ISO 19403-4:2020 Peintures et vernis - Mouillabilité - Partie 4 : détermination des fractions polaires et disperses de la tension de surface des liquides à partir de la tension interfaciable
  • NF C58-651-2*NF EN 61951-2:2017 Secondary cells and batteries containing alkaline or other non acid electrolytes - Secondary sealed cells and batteries for portable applications - Part 2 : nickel-metal hydride
  • NF C58-651-1*NF EN 61951-1:2017 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary sealed cells and batteries for portable applications - Part 1 : nickel-cadmium
  • NF EN IEC 61853-3:2018 Essais de performance et caractéristiques assignées d'énergie des modules photovoltaïques (PV) - Partie 3 : caractéristiques assignées d'énergie des modules PV
  • NF C93-584-2-1:2004 Radio frequency and coaxial cable assemblies - Part 2-1 : sectional specification for flexible coaxial cable assemblies.
  • NF C93-584-2-1*NF EN 60966-2-1:2015 Radio frequency and coaxial cable assemblies - Part 2-1 : sectional specification for flexible coaxial cable assemblies
  • NF E25-802-2:2007 Non-preloaded structural bolting assemblies - Part 2 : suitability test.
  • NF D74-305*NF EN 17432:2021 Packaged refrigerating units for walk-in cold rooms - Classification, performance and energy consumption testing
  • NF H94-001-7:2006 Safety of packaging machines - Part 7 : group and secondary packaging machines.
  • NF H94-001-7*NF EN 415-7+A1:2008 Safety of packaging machines - Part 7 : group and secondary packaging machines
  • NF H94-001-7/IN1*NF EN 415-7/IN1:2008 Safety of packaging machines - Part 7 : group and secondary packaging machines
  • NF C58-615-2*NF EN IEC 63115-2:2021 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-metal hydride cells and batteries for use in industrial applications - Part 2 : safety
  • NF C51-127-4*NF EN IEC 60034-27-4:2018 Rotating electrical machines - Part 27-4 : measurement of insulation resistance and polarization index on winding insulation of rotating electrical machines
  • NF T30-131-4*NF EN ISO 19403-4:2020 Paints and varnishes - Wettability - Part 4 : determination of the polar and dispersive fractions of the surface tension of liquids from an interfacial tension
  • NF A87-013-3/A1:2004 Welding and allied processes - Recommendations for joint preparation - Part 3 : metal inert gas welding and tungsten inert gas welding of aluminium and its alloys.
  • NF P15-313:2010 Supersulfated cement - Composition, specifications and conformity criteria.
  • NF P15-313*NF EN 15743+A1:2015 Supersulfated cement - Composition, specifications and conformity criteria
  • NF P15-313/IN1*NF EN 15743/IN1:2015 Supersulfated cement - Composition, specifications and conformity criteria
  • NF L06-380-21:2003 Aerospace series - Welded and brazed assemblies for aerospace construction - Weldability and beazability of materials - Part 21 : homgeneous assemblies of unalloyed and low alloy steels.
  • NF EN ISO 15711:2005 Peintures et vernis - Détermination de la résistance au décollement cathodique des revêtements exposés à l'eau de mer
  • NF EN IEC 60034-27-4:2018 Machines électriques tournantes - Partie 27-4 : mesure de la résistance d'isolement et de l'index de polarisation sur le système d'isolation des enroulements des machines électriques tournantes
  • NF EN 15727:2010 Ventilation des bâtiments - Composants de réseaux, classification de l'étanchéité et essais
  • NF P50-534-1*NF EN ISO 22975-1:2016 Solar energy - Collector components and materials - Part 1 : evacuated tubes - Durability and performance
  • NF EN ISO 22975-1:2016 Énergie solaire - Composants et matériaux du collecteur - Partie 1 : tubes sous vide - Durabilité et performances
  • NF C23-557:1992 Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for group II apparatus indicating up to 100 per cent lower explosive limit.
  • NF EN 61189-5-503:2017 Méthodes d'essai pour les matériaux électriques, les cartes imprimées et autres structures d'interconnexion et ensembles - Partie 5-503 : méthodes d'essai générales pour les matériaux et les assemblages - Essais des filaments anodiques condu...
  • NF A91-488*NF EN ISO 6719:2010 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments
  • FD CEN ISO/TR 20342-7:2022 Produits d'assistance pour l'intégrité des tissus en position allongée - Partie 7 : Propriétés, caractéristiques et performances des mousses
  • NF C93-584-2-3:2004 Radio frequency and coaxial cable assemblies - Part 2-3 : detail specification for flexible coaxial cable assemblies.
  • NF C93-581-00:1990 Sectional specification for flexible radiofrequency and coaxial cable assemblies - Level 1
  • NF C93-581-01:1991 Sectional specification for flexible radiofrequency and coaxial cable assemblies - Level 2
  • NF C58-659*NF EN 62259:2004 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Nickel-cadmium prismatic secondary single cells with partial gas recombination
  • NF E52-013-3*NF EN 13001-3-3:2014 Cranes - General design - Part 3-3 : limit states and proof of competence of wheel/rail contacts
  • NF A50-800-3/A1:2022 Tôles en alliage d'aluminium soudable laminées à chaud pour blindage - Partie 3 : Caractéristiques des munitions et vitesses limites de protection
  • NF A50-800-3:2019 Tôles en alliage d'aluminium soudable laminées à chaud pour blindage - Partie 3 : caractéristiques des munitions et vitesses limites de protection
  • NF EN 61747-4-1:2005 Dispositifs d'affichage à cristaux liquides - Partie 4-1 : modules LCD matriciels couleurs - Valeurs limites et caractéristiques essentielles
  • NF A50-800-3/A2:2023 Tôles en alliage d'aluminium soudable laminées à chaud pour blindage - Partie 3 : caractéristiques des munitions et vitesses limites de protection
  • NF EN 4710-02:2015 Série aérospatiale - Fixations rapides filetées pour applications non-structurales - Partie 02 : combinaison de colliers lyre et pions
  • NF T76-337:2008 Adhesives - One component polyurethane for load bearing timber structures - Classification and performance requirements.
  • NF EN 60966-3:2015 Ensembles de cordons coaxiaux et de cordons pour fréquences radioélectriques - Partie 3 : spécification intermédiaire pour cordons coaxiaux semi-flexibles
  • NF EN 60966-2-1:2015 Ensembles de cordons coaxiaux et de cordons pour fréquences radioélectriques - Partie 2-1 : spécification intermédiaire pour cordons coaxiaux souples
  • NF C93-735-503*NF EN 61189-5-503:2017 Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 5-503 : general test method for materials and assemblies - Conductive anodic filaments (CAF) testing of circuit boards
  • NF EN 4632-003:2010 Série aérospatiale - Soudabilité et brasabilité des matériaux pour constructions aérospatiales - Partie 003 : assemblages homogènes des aciers non alliés et faiblement alliés
  • NF E22-580:1987 PLAIN BEARINGS. TESTING OF THE TRIBOLOGICAL BEHAVIOUR OF BEARING MATERIALS. PART 1 : TESTING OF THE FRICTION AND WEAR BEHAVIOUR OF BEARING MATERIAL/MATING MATERIAL/OIL COMBINATIONS UNDER CONDITIONS OF BOUNDARY LUBRICATION.
  • NF C93-582-00:1991 Sectional specification for semi-flexible radiofrequency and coaxial cable assemblies - Level 1
  • NF C93-583-00:1991 Sectional specification for semi-rigid radiofrequency and coaxial cable assemblies - Level 1
  • NF C58-660-4*NF EN IEC 61960-4:2020 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for portable applications - Part 4 : coin secondary lithium cells, and batteries made from them
  • NF C93-584-2-2*NF EN 60966-2-2:2004 Radio frequency and coaxial cable assemblies - Part 2-2 : blank detail specification for flexible coaxial cable assemblies
  • NF C93-584-3-2*NF EN 60966-3-2:2004 Radio frequency and coaxial cable assemblies - Part 3-2 : detail specification for semi-flexible coaxial cable assemblies for GSM use (0,8 GHz - 1 GHz)
  • NF C20-003-4*NF EN IEC 60721-3-4:2019 Classification of environmental conditions - Part 3-4 : classification of groups of environmental parameters and their severities - Stationary use at non-weatherprotected locations
  • NF C58-542/A1:2005 Lead-acid traction batteries - Part 2 : dimensions of cells and terminals and marking of polarity on cells.
  • NF EN 60254-2:2008 Batteries d'accumulateur de traction au plomb - Partie 2 : dimensions des éléments et des bornes et indication de la polarité sur les éléments
  • NF EN IEC 60700-3:2023 Valves à thyristors pour le transport d'énergie en courant continu à haute tension (CCHT) - Partie 3 : valeurs assignées (valeurs limites) et caractéristiques essentielles
  • NF EN 4702-02:2017 Série aérospatiale - Fixations rapides filetées pour applications non-structurales et revêtements intérieurs - Partie 02 : combinaison de colliers lyre et pions
  • NF L06-380-24:2008 Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 24 : homogeneous assemblies titanium alloys.
  • NF EN IEC 61960-4:2020 Accumulateurs alcalins et autres accumulateurs à électrolyte non acide - Accumulateurs au lithium pour applications portables - Partie 4 : éléments et batteries d'accumulateurs boutons au lithium
  • NF P15-313:2005 Hydraulic binders - Super-sulfated cement - Composition, specifications and conformity criteria.
  • NF C93-584-3-1:2004 Radio frequency and coaxial cable assemblies - Part 3-1 : blank detail specification for semi-flexible coaxial cable assemblies.
  • NF C93-584-3-1*NF EN 60966-3-1:2015 Radio frequency and coaxial cable assemblies Part 3-1 : blank detail specification for semi-flexible coaxial cable assemblies
  • NF EN ISO 1167-4:2008 Tubes, raccords et assemblages en matières thermoplastiques pour le transport des fluides - Détermination de la résistance à la pression interne - Partie 4 : préparation des assemblages
  • NF EN 2591-6301:2002 Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 6301 : organes optiques - Endurance en température

German Institute for Standardization, Polar and Nonpolar Components

  • DIN EN ISO 6848:2015-12 Arc welding and cutting - Nonconsumable tungsten electrodes - Classification (ISO 6848:2015); German version EN ISO 6848:2015
  • DIN 18122-1:1997 Soil, investigation and testing - Consistency limits - Part 1: Determination of liquid limit and plastic limit
  • DIN CEN/TS 13001-3-2:2009 Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems; German version CEN/TS 13001-3-2:2008
  • DIN EN 15048-2:2016-09 Non-preloaded structural bolting assemblies - Part 2: Fitness for purpose; German version EN 15048-2:2016
  • DIN EN 50164-5:2009 Lightning Protection Components (LPC) - Part 5: Requirements for earth electrode inspection housings and earth electrode seals; German version EN 50164-5:2009
  • DIN EN 13001-3-2:2015 Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems; German version EN 13001-3-2:2014
  • DIN EN 13001-3-2:2014 Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems; German version EN 13001-3-2:2014
  • DIN EN 13631-7:2004-02 Explosives for civil uses - High explosives - Part 7: Determination of safety and reliability at extreme temperatures; German version EN 13631-7:2003 / Note: To be replaced by DIN EN 13631-7 (2021-05).
  • DIN CEN/TS 13001-3-2:2013 Cranes.General design.Part 3-2: Limit states and proof of competence of wire ropes in reeving systems; German version CEN/TS 13001-3-2:2008
  • DIN 743-4:2012-12 Calculation of load capacity of shafts and axles - Part 4: Fatigue limit, endurance limit - Equivalently damaging continuous stress
  • DIN EN 13631-7:2021-05 Explosives for civil uses - Explosives - Part 7: Determination of safety and reliability at extreme temperatures; German and English version prEN 13631-7:2021 / Note: Date of issue 2021-04-23*Intended as replacement for DIN EN 13631-7 (2004-02).
  • DIN EN ISO 636:2017-09 Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification (ISO 636:2017); German version EN ISO 636:2017
  • DIN EN 13631-7:2004 Explosives for civil uses - High explosives - Part 7: Determination of safety and reliability at extreme temperatures; German version EN 13631-7:2003
  • DIN EN ISO 9692-3:2001 Welding and allied processes - Recommendations for joint preparation - Part 3: Metal inert gas welding und tungsten inert gas welding of aluminium and its alloys (ISO 9692-3:2001); German version EN ISO 9692-3:2001
  • DIN EN 60966-2-1:2010 Radio frequency and coaxial cable assemblies - Part 2-1: Sectional specification for flexible coaxial cable assemblies (IEC 60966-2-1:2008); German version EN 60966-2-1:2009
  • DIN 44402-16:1972 Measurements of the electrical properties of electronic tubes and valves; methods of measurement of spurious and unwanted electrode currents
  • DIN 24564-1:1995-08 Fluid power systems and components - Part 1: Characteristics
  • DIN 55660-4:2012 Paints and varnishes - Wettability - Part 4: Determination of the polar and dispersive fractions of the surface tension of liquids from an interfacial tension
  • DIN EN 15048-2:2007 Non-preloaded structural bolting assemblies - Part 2: Suitability test;German version EN 15048-2:2007
  • DIN EN 17432:2022 Packaged refrigerating units for walk-in cold rooms - Classification, performance and energy consumption testing
  • DIN EN 62561-5:2012 Lightning protection system components (LPSC) - Part 5: Requirements for earth electrode inspection housings and earth electrode seals (IEC 62561-5:2011, modified); German version EN 62561-5:2011
  • DIN EN 61189-5-503:2018-01 Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 5-503: General test method for materials and assemblies - Conductive anodic filaments (CAF) testing of circuit boards (IEC 61189-5-503:2017)...
  • DIN 58356-10:1997 Membrane filter elements - Part 10: Determination of non volatile extractable components - Filtrate concentration limit
  • DIN 38413-5:1990 German standard methods for the examination of water, waste water and sludge; individual constituents (group P); determination of ethylenediaminetetraacetic acid (EDTA) and nitrilotriacetic acid (NTA) by polarography (P 5)
  • DIN EN 12767:2008 Passive safety of support structures for road equipment - Requirements, classification and test methods; English version of DIN EN 12767:2008-01
  • DIN EN ISO 19403-4:2020 Paints and varnishes - Wettability - Part 4: Determination of the polar and dispersive fractions of the surface tension of liquids from an interfacial tension (ISO 19403-4:2017)
  • DIN EN 12373-9:1999 Aluminium and aluminium alloys - Anodizing - Part 9: Measurement of wear resistance and wear index of anodic oxidation coatings using an abrasive wheel wear test apparatus; German version EN 12373-9:1998
  • DIN 18506:2002 Hydraulic road binders - Composition, specifications and conformity criteria
  • DIN EN IEC 60966-3-3:2023-02 Radio frequency and coaxial cable assemblies - Part 3-3: Detail specification for semi-flexible cable assemblies (jumper), Frequency range up to 18 GHz, Type 50-141 semi-flexible coaxial cable (IEC 46/810/CD:2021); Text in German and English / Note: Da...
  • DIN EN ISO 1167-4:2008-02 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 4: Preparation of assemblies (ISO 1167-4:2007); German version EN ISO 1167-4:2007
  • DIN EN ISO 22975-1:2017-03 Solar energy - Collector components and materials - Part 1: Evacuated tubes - Durability and performance (ISO 22975-1:2016); German version EN ISO 22975-1:2016
  • DIN EN IEC 60966-3:2023-07 Radio frequency and coaxial cable assemblies - Part 3: Sectional specification for semi-flexible coaxial cable assemblies (IEC 46/860/CD:2021); Text in German and English / Note: Date of issue 2023-06-16*Intended as replacement for DIN EN 60966-3 (2010...
  • DIN EN 60424-3:2000 Ferrite cores - Guide on the limits of surface irregularities - Part 3: ETD-cores and E-cores (IEC 60424-3:1999); German version EN 60424-3:1999
  • DIN EN ISO 19403-4:2020-04 Paints and varnishes - Wettability - Part 4: Determination of the polar and dispersive fractions of the surface tension of liquids from an interfacial tension (ISO 19403-4:2017); German version EN ISO 19403-4:2020
  • DIN EN 60966-4:2004-06 Radio frequency and coaxial cable assemblies - Part 4: Sectional specification for semi-rigid coaxial cable assemblies (IEC 60966-4:2003); German version EN 60966-4:2003 / Note: DIN EN 60966-4 (1995-02) remains valid alongside this standard until 2006-...
  • DIN EN 60966-3:2010-01 Radio frequency and coaxial cable assemblies - Part 3: Sectional specification for semi-flexible coaxial cable assemblies (IEC 60966-3:2008); German version EN 60966-3:2009 / Note: DIN EN 60966-3 (2004-06) remains valid alongside this standard until 20...
  • DIN EN IEC 60966-4:2023-07 Radio frequency and coaxial cable assemblies - Part 4: Sectional specification for semi-rigid coaxial cable assemblies (IEC 46/867/CD:2021); Text in German and English / Note: Date of issue 2023-06-16*Intended as replacement for DIN EN 60966-4 (2004-06).
  • DIN EN 15425:2008 Adhesives - One component polyurethane for load bearing timber structures - Classification and performance requirements; German version EN 15425:2008
  • DIN 4030-1:1991 Assessment of water, soil and gases for their aggressiveness to concrete; principles and limiting values
  • DIN EN 60966-2-2:2004-06 Radio frequency and coaxial cable assemblies - Part 2-2: Blank detail specification for flexible coaxial cable assemblies (IEC 60966-2-2:2003); German version EN 60966-2-2:2003 / Note: DIN EN 60966-2-2 (1995-02) remains valid alongside this standard un...
  • DIN 21057-12:2017 Pipe classes for process plants - Part 12: Technical delivery conditions for pipe components of non alloyed and alloyed steel with specified properties at elevated temperatures of material group 1.2 and 5.1
  • DIN 21057-12:2017-04 Pipe classes for process plants - Part 12: Technical delivery conditions for pipe components of non alloyed and alloyed steel with specified properties at elevated temperatures of material group 1.2 and 5.1
  • DIN EN 60254-2:2008 Lead-acid traction batteries - Part 2: Dimensions of cells and terminals and marking of polarity on cells (IEC 60254-2:2008); German version EN 60254-2:2008
  • DIN EN 60254-2:2009 Lead-acid traction batteries - Part 2: Dimensions of cells and terminals and marking of polarity on cells (IEC 60254-2:2008); German version EN 60254-2:2008
  • DIN IEC 60151-14:1980 Measurement of the electrical properties of electronic tubes; part 14: methods of measurement of radar and oscilloscope cathode-ray tubes
  • DIN EN 60254-2:2001 Lead-acid traction batteries - Part 2: Dimensions of cells and terminals and marking of polarity on cells (IEC 60254-2:1997 + A1:2000); German version EN 60254-2:1997 + A1:2000
  • DIN EN 62259:2004 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Nickel-cadmium prismatic secondary single cells with partial gas recombination (IEC 62259:2003); German version EN 62259:2004
  • DIN EN 62259:2004-10 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Nickel-cadmium prismatic secondary single cells with partial gas recombination (IEC 62259:2003); German version EN 62259:2004
  • DIN 21057-10:2017 Pipe classes for process plants - Part 10: Technical delivery conditions for pipe components of non-alloyed and alloyed steel with specified properties at elevated temperatures of material group 1.1
  • DIN 21057-10:2017-04 Pipe classes for process plants - Part 10: Technical delivery conditions for pipe components of non-alloyed and alloyed steel with specified properties at elevated temperatures of material group 1.1
  • DIN EN 60721-3-7:1995-09 Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 7: Portable and non-stationary use (IEC 60721-3-7:1995); German version EN 60721-3-7:1995
  • DIN EN 4632-002:2009-06 Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 002: Homogeneous assemblies aluminium and aluminium alloys; German and English version EN 4632-002:2008
  • DIN EN 60966-3-1:2009-11 Radio frequency and coaxial cable assemblies - Part 3-1: Blank detail specification for semi-flexible coaxial cable assemblies (IEC 60966-3-1:2009); German version EN 60966-3-1:2009 / Note: DIN EN 60966-3-1 (2004-06) remains valid alongside this standa...
  • DIN EN 60966-4-1:2004-06 Radio frequency and coaxial cable assemblies - Part 4-1: Blank detail specification for semi-rigid coaxial cable assemblies (IEC 60966-4-1:2003); German version EN 60966-4-1:2003 / Note: DIN EN 60966-4-1 (1995-02) remains valid alongside this standard ...

ES-UNE, Polar and Nonpolar Components

  • UNE-EN ISO 6848:2015 Arc welding and cutting - Nonconsumable tungsten electrodes - Classification (ISO 6848:2015)
  • UNE-EN 62561-5:2018 Lightning protection system components (LPSC) - Part 5: Requirements for earth electrode inspection housings and earth electrode seals
  • UNE-EN IEC 62561-2:2018/AC:2019-09 Lightning protection system components (LPSC) - Part 2: Requirements for conductors and earth electrodes
  • UNE-EN IEC 62561-2:2018 Lightning Protection System Components (LPSC) - Part 2: Requirements for conductors and earth electrodes
  • UNE-EN IEC 63115-1:2020/A1:2022 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-metal hydride cells and batteries for use in industrial applications - Part 1: Performance (Endorsed by Asociación Española de Normalización in January ...
  • UNE-EN IEC 63115-1:2020 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-metal hydride cells and batteries for use in industrial applications - Part 1: Performance (Endorsed by Asociación Española de Normalización in May of 2...
  • UNE-EN IEC 63115-2:2021 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-metal hydride cells and batteries for use in industrial applications - Part 2: Safety (Endorsed by Asociación Española de Normalización in March of 2021.)
  • UNE-EN 61951-1:2017 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary sealed cells and batteries for portable applications - Part 1: Nickel-cadmium (Endorsed by Asociación Española de Normalización in June of 2017.)
  • UNE-EN 61951-2:2017/A1:2022 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary sealed cells and batteries for portable applications - Part 2: Nickel-metal hydride (Endorsed by Asociación Española de Normalización in January of 2023.)
  • UNE-EN 60966-2-1:2009 Radio frequency and coaxial cable assemblies -- Part 2-1: Sectional specification for flexible coaxial cable assemblies (Endorsed by AENOR in December of 2009.)
  • UNE-EN 60966-3:2009 Radio frequency and coaxial cable assemblies -- Part 3: Sectional specification for semi-flexible coaxial cable assemblies (Endorsed by AENOR in July of 2009.)
  • UNE-EN IEC 61960-4:2020 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for portable applications - Part 4: Coin secondary lithium cells, and batteries made from them (Endorsed by Asociación Española d...
  • UNE-EN 60966-4:2003 Radio frequency and coaxial cable assemblies -- Part 4: Sectional specification for semi-rigid coaxial cable assemblies (Endorsed by AENOR in March of 2004.)
  • UNE-EN 61951-1:2017/A1:2023 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary sealed cells and batteries for portable applications - Part 1: Nickel-Cadmium (Endorsed by Asociación Española de Normalización in April of 2023.)
  • UNE-EN IEC 60034-27-4:2018 Rotating electrical machines - Part 27-4: Measurement of insulation resistance and polarization index on winding insulation of rotating electrical machines (Endorsed by Asociación Española de Normalización in August of 2018.)
  • UNE-EN ISO 19403-4:2021 Paints and varnishes - Wettability - Part 4: Determination of the polar and dispersive fractions of the surface tension of liquids from an interfacial tension (ISO 19403-4:2017)
  • UNE-EN 61960-3:2017 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for portable applications - Part 3: Prismatic and cylindrical lithium secondary cells, and batteries made from them (Endorsed by As...
  • UNE-CEN ISO/TR 20342-7:2022 Assistive products for tissue integrity when lying down - Part 7: Foam properties, characteristics and performance (ISO/TR 20342-7:2021) (Endorsed by Asociación Española de Normalización in June of 2022.)
  • UNE-EN ISO 22975-1:2020 Solar energy - Collector components and materials - Part 1: Evacuated tubes - Durability and performance (ISO 22975-1:2016)
  • UNE-EN 60966-2-2:2003 Radio frequency and coaxial cable assemblies -- Part 2-2: Blank detail specification for flexible coaxial cable assemblies (Endorsed by AENOR in March of 2004.)
  • UNE-EN ISO/IEC 80079-38:2016/A1:2018 Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016) (Endorsed by Asociación Española de Normalización in October of 2018.)
  • UNE-EN ISO/IEC 80079-38:2016 Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016) (Endorsed by Asociación Española de Normalización in October of 2018.)
  • UNE-EN 4632-002:2008 Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 002: Homogeneous assemblies aluminium and aluminium alloys (Endorsed by AENOR in June of 2008.)
  • UNE-EN 60966-3-1:2009 Radio frequency and coaxial cable assemblies -- Part 3-1: Blank detail specification for semi-flexible coaxial cable assemblies (Endorsed by AENOR in July of 2009.)
  • UNE-EN 60966-4-1:2003 Radio frequency and coaxial cable assemblies -- Part 4-1: Blank detail specification for semi-rigid coaxial cable assemblies (Endorsed by AENOR in March of 2004.)

RO-ASRO, Polar and Nonpolar Components

  • STAS 503-1971 Actions on structures CLASSIFICATION AND GROUPING OF LOADS Ultimate strength method and allowable stress method
  • STAS SR ISO 7148/1:1985 Plain bearings. Testing of the tribological behaviour of bearing materials. Part 1: Testing of the friction and wear behaviour of bearing material/mating material/oii combinations unde*' conditions of boundary lubrification

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Polar and Nonpolar Components

  • GB/T 5009.202-2003 Determination of polar compouds in edible vegetable oils used in frying food
  • GB/T 7102.2-1994 Method for determination of polar compouds in edible vegetable oils used in frying food
  • GB/T 20140-2016 Measurement method and evaluation criteria of dynamic characteristic and vibration on stator end windings of cylindrical synchronous generators
  • GB/T 12690.16-2010 Chemical analysis methods of non-rare earth impurities in rare earth metals and the oxides—Part 16:Determination of fluorine content—Ion selective electrode analysis
  • GB/T 17948.2-2006 Functional evaluation of insulation systems for rotating electrical machines.Test procedures for wire-wound windings.Classification of changes and insulation componete substitutions
  • GB/T 1878-1995 Phosphate rock and concentrate--Determination of iodine content--Spectrophotometric and specific ion electrode methods
  • GB/T 12967.2-2008 Test methods for anodic oxidation coatings of aluminium and aluminium alloys.Part 2:Measurement of wear resistance and wear index of anodic oxidation coatings with an abrasive wheel wear test apparatus
  • GB/T 18748-2002 Standard test method for separation of active ingredient from surfactant and syndet compositions
  • GB/T 22084.1-2008 Secondary cells and batteries containing alkaline or other non-acid electrolytes-Protable sealed rechargeable single cells-Part 1:Nickel-cadmium

National Health Commission of the People's Republic of China, Polar and Nonpolar Components

  • GB 5009.202-2016 National Food Safety Standard Determination of Polar Components (PC) in Edible Oils

Lithuanian Standards Office , Polar and Nonpolar Components

  • LST EN ISO 6848:2005 Arc welding and cutting - Nonconsumable tungsten electrodes - Classification (ISO 6848:2004)
  • LST EN 15048-2-2007 Non-preloaded structural bolting assemblies - Part 2: Suitability test
  • LST EN 62561-5-2011 Lightning protection system components (LPSC) -- Part 5: Requirements for earth electrode inspection housings and earth electrode seals (IEC 62561-5:2011, modified)
  • LST EN 13631-7-2004 Explosives for civil uses - High explosives - Part 7: Determination of safety and reliability at extreme temperatures
  • LST EN 62561-2-2012 Lightning Protection System Components (LPSC) -- Part 2: Requirements for conductors and earth electrodes (IEC 62561-2:2012, modified)
  • LST EN 62259-2004 Secondary cells and batteries containing alkaline or other non-acid electrolytes. Nickel-cadmium prismatic secondary single cells with partial gas recombination (IEC 62259:2003)
  • LST EN ISO 636:2008 Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification (ISO 636:2004)
  • LST EN 15425-2008 Adhesives - One component polyurethane for load bearing timber structures - Classification and performance requirements

International Organization for Standardization (ISO), Polar and Nonpolar Components

  • ISO 24598:2019 Welding consumables — Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of creep-resisting steels — Classification
  • ISO/TR 21141:2022 Timber structures — Timber connections and assemblies — Determination of yield and ultimate characteristics and ductility from test data
  • ISO 8092-2:1996 Road vehicles - Connections for on-board electrical wiring harnesses - Part 2: Definitions, test methods and general performance requirements
  • ISO 11929-4:2022 Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation — Fundamentals and application — Part 4: Gui
  • ISO 16751:2020 Soil quality — Environmental availability of non-polar organic compounds — Determination of the potentially bioavailable fraction and the non-bioavailable fraction using a strong adsorbent or complexi
  • ISO/TS 16751:2018 Soil quality — Environmental availability of non-polar organic compounds — Determination of the potential bioavailable fraction and the non-bioavailable fraction using a strong adsorbent or complexing
  • ISO 19403-4:2017 Paints and varnishes - Wettability - Part 4: Determination of the polar and dispersive fractions of the surface tension of liquids from an interfacial tension
  • ISO/CD 19403-4:2023 Paints and varnishes — Wettability — Part 4: Determination of the polar and dispersive fractions of the surface tension of liquids from an interfacial tension
  • ISO/DIS 19403-4:2023 Paints and varnishes — Wettability — Part 4: Determination of the polar and dispersive fractions of the surface tension of liquids from an interfacial tension
  • ISO/TR 20342-7:2021 Assistive products for tissue integrity when lying down - Part 7: Foam properties, characteristics and performance
  • ISO 6719:1986 Anodized aluminium and aluminium alloys; Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments
  • ISO/FDIS 22975-4 Solar energy — Collector components and materials — Part 4: Glazing material durability and performance
  • ISO 22975-5:2019 Solar energy — Collector components and materials — Part 5: Insulation material durability and performance
  • ISO 22975-4:2023 Solar energy — Collector components and materials — Part 4: Glazing material durability and performance
  • ISO 19403-5:2017 Paints and varnishes - Wettability - Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy
  • ISO 23418:2022 Microbiology of the food chain — Whole genome sequencing for typing and genomic characterization of bacteria — General requirements and guidance
  • ISO 2605-2:1976 Steel products for pressure purposes; Derivation and verification of elevated temperature properties; Part II : Proof stress of austenitic steel products

British Standards Institution (BSI), Polar and Nonpolar Components

  • BS EN ISO 6848:2015 Tracked Changes. Arc welding and cutting. Nonconsumable tungsten electrodes. Classification
  • BS PD IEC/TS 62861:2017 Guidelines for principal component reliability testing for LED light sources and LED luminaires
  • BS EN 50164-2:2008 Lightning protection components (LPC) -Part 2: Requirements for conductors and earth electrodes
  • BS EN 60254-2:2008 Lead-acid traction batteries - Part 2: Dimensions of cells and terminals and marking of polarity on cells
  • 21/30435599 DC BS EN IEC 62561-5. Lightning protection system components (LPSC) - Part 5. Requirements for earth electrode inspection housings and earth electrode seals
  • BS EN 61779-4:2000 Electrical apparatus for the detection and measurement of flammable gases - Performance requirements for group II apparatus indicating a volume fraction up to 100% lower explosive limit
  • 22/30454213 DC BS EN IEC 62561-2. Lightning protection system components (LPSC). Part 2. Requirements for conductors and earth electrodes
  • 21/30435071 DC BS EN IEC 62561-2. Lightning protection system components (LPSC). Part 2. Requirements for conductors and earth electrodes
  • BS EN 1668:1997 Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non alloy and fine grain steels - Classification
  • 16/30351255 DC BS EN 61960-4. Secondary cells and batteries containing alkaline or other non-acid electrolytes. Part 4. Coin type secondary lithium cells and batteries
  • BS ISO 16751:2020 Soil quality. Environmental availability of non-polar organic compounds. Determination of the potentially bioavailable fraction and the non-bioavailable fraction using a strong adsorbent or complexing agent
  • 19/30392867 DC BS ISO 16751. Soil quality. Environmental availability of non-polar organic compounds. Determination of the potentially bioavailable fraction and the non-bioavailable fraction using a strong adsorbent or complexing agent
  • BS EN 60966-3:2009 Radio frequency and coaxial cable assemblies - Part 3:Sectional specification for semi-flexible coaxial cable assemblies
  • BS EN 60875-1:2010 Fibre optic interconnecting devices and passive components. Non-wavelength-selective fibre optic branching devices. Generic specification
  • BS EN 60875-1:2015 Fibre optic interconnecting devices and passive components. Non-wavelength-selective fibre optic branching devices. Generic specification
  • 22/30447625 DC BS EN 63115-1 AMD1. Secondary cells and batteries containing alkaline or other non-acid electrolytes. Sealed nickel-metal hydride cells and batteries for use in industrial applications. Part 1. Performance
  • BS EN ISO 19403-4:2020 Paints and varnishes. Wettability - Determination of the polar and dispersive fractions of the surface tension of liquids from an interfacial tension
  • BS EN 15743:2010 Supersulfated cement - Composition, specifications and conformity criteria
  • DD ENV 13282-2000 Hydraulic road binders. Composition, specifications and conformity criteria
  • 21/30423877 DC BS EN 13631-7. Explosives for civil uses. Explosives - Part 7. Determination of safety and reliability at extreme temperatures
  • 21/30430590 DC BS EN 61951-1 AMD1. Secondary cells and batteries containing alkaline or other non-acid electrolytes. Secondary sealed cells and batteries for portable applications. Part 1. Nickel-Cadmium
  • 21/30430594 DC BS EN 61951-2 AMD1. Secondary cells and batteries containing alkaline or other non acid electrolytes. Secondary sealed cells and batteries for portable applications. Part 2. Nickel-metal hydride
  • 17/30339487 DC BS EN 13053. Ventilation for buildings. Air handling units. Rating and performance for units, components and sections
  • BS EN ISO 636:2017 Tracked Changes. Welding consumables. Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels. Classification
  • BS EN ISO 6719:2010 Anodizing of aluminium and its alloys. Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments
  • BS EN 62259:2004 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Nickel-cadmium prismatic secondary single cells with partial gas recombination
  • BS 638 Pt.8:1984 Arc welding power sources, equipment and accessories. Specification for electrode holders and hand held torches and guns for MIG, MAG and TIG welding
  • BS EN 15425:2008 Adhesives - One component polyurethane for load bearing timber structures - Classification and performance requirements
  • BS EN 15425:2017 Adhesives. One component polyurethane (PUR) for load-bearing timber structures. Classification and performance requirements
  • BS EN 12373-9:1999 Aluminium and Aluminium Alloys - Anodizing - Part 9: Measurement of Wear Resistance and Wear Index of Anodic Oxidation Coatings Using an Abrasive Wheel Wear Test Apparatus Ratified European Text
  • 23/30459295 DC BS EN ISO 18563-3. Non-destructive testing. Characterization and verification of ultrasonic phased array equipment - Part 3. Combined systems
  • 18/30363681 DC BS EN ISO 22232-3. Non-destructive testing. Characterization and verification of ultrasonic test equipment. Part 3. Combined equipment
  • BS EN 60966-3-1:2009 Radio frequency and coaxial cable assemblies - Part 3-1:Blank detail specification for semi-flexible coaxial cable assemblies

International Electrotechnical Commission (IEC), Polar and Nonpolar Components

  • IEC TS 62861:2017 Guidelines for principal component reliability testing for LED light sources and LED luminaires
  • IEC 60254-2:2008 Lead-acid traction batteries - Part 2: Dimensions of cells and terminals and marking of polarity on cells
  • IEC 62561-5:2011 Lightning protection system components (LPSC) - Part 5: Requirements for earth electrode inspection housings and earth electrode seals
  • IEC 62561-5:2017 Lightning protection system components (LPSC) - Part 5: Requirements for earth electrode inspection housings and earth electrode seals
  • IEC 62561-2:2012 Lightning Protection System Components (LPSC) - Part 2: Requirements for conductors and earth electrodes
  • IEC 62561-2:2018 Lightning protection system components (LPSC) - Part 2: Requirements for conductors and earth electrodes
  • IEC 60254-2/AMD1:2000 Lead-acid traction batteries - Part 2: Dimensions of cells and terminals and marking of polarity on cells; Amendment 1
  • IEC 62561-2:2018/COR1:2019 Corrigendum 1 - Lightning protection system components (LPSC) - Part 2: Requirements for conductors and earth electrodes
  • IEC 62133-2:2017 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications - Part 2: Lithium systems
  • IEC 62133-1:2017 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications - Part 1: Nickel systems
  • IEC 61951-2:2017 RLV Secondary cells and batteries containing alkaline or other non acid electrolytes - Secondary sealed cells and batteries for portable applications - Part 2: Nickel-metal hydride
  • IEC 61951-1:2017 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary sealed cells and batteries for portable applications - Part 1: Nickel-cadmium
  • IEC 60034-27-4:2018 Rotating electrical machines - Part 27-4: Measurement of insulation resistance and polarization index of winding insulation of rotating electrical machines
  • IEC TS 63109:2022 Photovoltaic (PV) modules and cells - Measurement of diode ideality factor by quantitative analysis of electroluminescence images
  • IEC 63182-5:2021 Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 5: Cylinder-cores
  • IEC 61951-2:2017 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary sealed cells and batteries for portable applications - Part 2: Nickel-metal hydride
  • IEC 63115-1:2020+AMD1:2022 CSV Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-metal hydride cells and batteries for use in industrial applications - Part 1: Performance
  • IEC 61853-3:2018 Photovoltaic (PV) module performance testing and energy rating - Part 3: Energy rating of PV modules
  • IEC 60254-2:1985 Lead-acid traction batteries. Part 2 : Dimensions of cells and terminals and marking of polarity on cells
  • CISPR TR 16-4-4:2007+AMD1:2017 CSV Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-4: Uncertainties, statistics and limit modelling - Statistics of complaints and a model for the calculation of
  • CISPR TR 16-4-4-2007+AMD1-2017 CSV Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-4: Uncertainties, statistics and limit modelling - Statistics of complaints and a model for the calculation of
  • IEC 63182-3:2021 Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 3: E-cores
  • IEC 63182-4:2021 Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 4: Block-cores
  • IEC 61960-3:2017 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for portable applications - Part 3: Prismatic and cylindrical lithium secondary cells, and batteries made from them
  • IEC 61558-2-8:2010 Safety of transformers, reactors, power supply units and combinations therof - Part 2-8: Particular requirements and tests for transformers and power supply units for bells and chimes
  • IEC 63115-1:2020/AMD1:2022 Amendment 1 - Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-metal hydride cells and batteries for use in industrial applications - Part 1: Performanc
  • IEC 60700-3:2022 Thyristor valves for high voltage direct current (HVDC) power transmission - Part 3: Essential ratings (limiting values) and characteristics
  • IEC 60605-4:1986 Equipment reliability testing. Part 4 : Procedures for determining point estimates and confidence limits from equipment reliability determination tests
  • IEC 61951-2:2017+AMD1:2022 CSV Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary sealed cells and batteries for portable applications - Part 2: Nickel-metal hydride

RU-GOST R, Polar and Nonpolar Components

  • GOST R IEC 62561-5-2014 Lightning protection system components. Part 5. Requirements for earth electrode inspection housings and earth electrode seals
  • GOST R IEC 62561-2-2014 Lightning protection system components (LPSC). Part 2. Requirements for conductors and earth electrodes
  • GOST IEC 61779-4-2006 Electrical apparatus for the detection and measurement of flammable gases. Part 4. Performance requirements for group II apparatus indicating a volume fraction up to 100% lower explosive limit
  • GOST R IEC 62259-2007 Secondary cells and batteries containing alkaline or other non-acid electrolytes. Nickel-cadmium prismatic secondary single cells with partial recombination
  • GOST R IEC 60254-2-2009 Lead-acid traction batteries. Part 2. Dimensions of cells and terminals and marking of polarity on cells
  • GOST 31479-2012 Meat and meat products. Method of histological identification of composition
  • GOST ISO 1167-4-2013 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids. Determination of the resistance to internal pressure. Part 4. Preparation of assemblies
  • GOST R 57030-2016 Fiberglass-reinforced thermosetting plastic pipes and parts of pipelines. Test method for determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions

European Committee for Electrotechnical Standardization（CENELEC）, Polar and Nonpolar Components

  • EN 60254-2:2008 Lead-acid traction batteries - Part 2: Dimensions of cells and terminals and marking of polarity on cells
  • EN IEC 62561-2:2018 Lightning protection system components (LPSC) - PART 2: Requirements for conductors and earth electrodes
  • EN IEC 63115-1:2020 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-metal hydride cells and batteries for use in industrial applications - Part 1: Performance
  • EN 61951-1:2017 Secondary cells and batteries containing alkaline or other nonacid electrolytes - Secondary sealed cells and batteries for portable applications - Part 1: Nickel-cadmium
  • EN 60966-3:2009 Radio frequency and coaxial cable assemblies - Part 3: Sectional specification for semi-flexible coaxial cable assemblies
  • EN IEC 63115-2:2021 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-metal hydride cells and batteries for use in industrial applications - Part 2: Safety
  • EN IEC 60034-27-4:2018 Rotating electrical machines - Part 27-4: Measurement of insulation resistance and polarization index on winding insulation of rotating electrical machines
  • EN 60966-4:2003 Radio frequency and coaxial cable assemblies Part 4: Sectional specification for semi-rigid coaxial cable assemblies
  • EN 61189-5-503:2017 Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 5-503: General test method for materials and assemblies - Conductive anodic filaments (CAF) testing of circuit boards
  • EN IEC 60721-3-4:2019 Classification of environmental conditions - Part 3-4: Classification of groups of environmental parameters and their severities - Stationary use at non-weatherprotected locations
  • EN 61951-1:2014 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Portable sealed rechargeable single cells - Part 1: Nickel-cadmium

CENELEC - European Committee for Electrotechnical Standardization, Polar and Nonpolar Components

  • EN 60254-2:1997 Lead-Acid Traction Batteries - Part 2: Dimensions of Cells and Terminals and Marking of Polarity on Cells (Incorporates Amendment A1: 2000)
  • EN 62561-2:2012 Lightning Protection System Components (LPSC) - Part 2: Requirements for conductors and earth electrodes (Remains Current)
  • EN 60966-4:1994 Radio Frequency and Coaxial Cable Assemblies Part 4: Sectional Specification for Semi-Rigid Coaxial Cable Assemblies
  • EN 60966-3:1994 Radio Frequency and Coaxial Cable Assemblies Part 3: Sectional Specification for Semi-Flexible Coaxial Cable Assemblies
  • EN 60966-3:2003 Radio frequency and coaxial cable assemblies Part 3: Sectional specification for semi-flexible coaxial cable assemblies
  • EN 60966-2-3:1999 Radio Frequency and Coaxial Cable Assemblies Part 2-3: Detail Specification for Flexible Coaxial Cable Assemblies
  • EN 60966-2-3:2003 Radio frequency and coaxial cable assemblies Part 2-3: Detail specification for flexible coaxial cable assemblies
  • EN 60966-4-1:1994 Radio Frequency and Coaxial Cable Assemblies Part 4-1: Blank Detail Specification for Semi-Rigid Coaxial Cable Assemblies
  • EN 60966-3-1:2003 Radio frequency and coaxial cable assemblies Part 3-1: Blank detail specification for semi-flexible coaxial cable assemblies
  • EN 61951-1:2003 Secondary cells and batteries containing alkaline or other non-acid electrolytes – Portable sealed rechargeable single cells Part 1: Nickel-cadmium
  • EN 61951-1:2001 Secondary Cells and Batteries Containg Alkaline or Other Non-Acid Electrolytes - Portable Sealed Rechargeable Single Cells Part 1: Nickel-Cadmium
  • EN 60966-3-1:2009 Radio frequency and coaxial cable assemblies - Part 3-1: Blank detail specification for semi-flexible coaxial cable assemblies

European Committee for Standardization (CEN), Polar and Nonpolar Components

  • EN ISO 14171:2016 Welding consumables - Solid wire electrodes@ tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels - Classification
  • EN ISO 636:2017 Welding consumables - Rods@ wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification
  • EN 1668:1997 Welding Consumables - Rods, Wires and Deposits for Tungsten Inert Gas Welding of Non Alloy and Fine Grain Steels - Classification
  • EN 12373-15:2000 Aluminium and Aluminium Alloys - Anodizing - Part 15: Assessment of Resistance of Anodic Oxidation Coatings to Cracking by Deformation
  • EN ISO 636:2015 Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification
  • EN 12373-16:2001 Aluminium and Aluminium Alloys - Anodizing - Part 16: Check for Continuity of Thin Anodic Oxidation Coatings - Copper Sulfate Test
  • prEN 13631-7-2021 Explosives for civil uses - Explosives - Part 7: Determination of safety and reliability at extreme temperatures
  • prEN ISO 636 rev Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification
  • EN ISO 19403-4:2020 Paints and varnishes - Wettability - Part 4: Determination of the polar and dispersive fractions of the surface tension of liquids from an interfacial tension (ISO 19403-4:2017)
  • EN 15048-2:2007 Non-preloaded structural bolting assemblies - Part 2: Suitability test
  • EN 15048-2:2016 Non-preloaded structural bolting assemblies - Part 2: Fitness for purpose
  • EN 17432:2021 Packaged refrigerating units for walk-in cold rooms - Classification, performance and energy consumption testing
  • EN 15743:2010 Supersulfated cement - Composition, specifications and conformity criteria (Incorporates Amendment A1: 2015)
  • EN ISO 9692-3:2016 Welding and allied processes - Types of joint preparation - Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys
  • EN 12373-12:2000 Aluminium and Aluminium Alloys - Anodizing - Part 12: Measurement of Reflectance Characteristics of Aluminium Surfaces Using Integrating-Sphere Instruments
  • EN ISO 6719:2010 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments (ISO 6719:2010)
  • EN 15425:2008 Adhesives - One component polyurethane for load bearing timber structures - Classification and performance requirements
  • EN 15425:2017 Adhesives - One component polyurethane (PUR) for load-bearing timber structures - Classification and performance requirements
  • HD 465.2 S1-1987 Lead-acid traction batteries; part 2: dimensions of cells and terminals and marking of polarity on cells
  • EN ISO 9692-3:2001/A1:2003 Welding and allied processes - Recommendations for joint preparation - Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys (ISO 9692-3:2000); Amendment A1
  • EN 12373-9:1998 Aluminium and Aluminium Alloys - Anodizing - Part 9: Measurement of Wear Resistance and Wear Index of Anodic Oxidation Coatings Using an Abrasive Wheel Wear Test Apparatus Ratified European Text
  • CEN ISO/TR 20342-7:2022 Assistive products for tissue integrity when lying down - Part 7: Foam properties, characteristics and performance (ISO/TR 20342-7:2021)
  • EN 12373-10:1998 Aluminium and Aluminium Alloys - Anodizing - Part 10: Measurement of Mean Specific Abrasion Resistance of Anodic Oxidation Coatings Using an Abrasive Jet Test Apparatus Ratified European Text
  • EN ISO 19403-5:2020 Paints and varnishes - Wettability - Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy (ISO 19403-5:2017)
  • EN ISO 23418:2022 Microbiology of the food chain - Whole genome sequencing for typing and genomic characterization of bacteria - General requirements and guidance (ISO 23418:2022)
  • CEN EN 15425-2008_ Adhesives — One component polyurethane for load bearing timber structures — Classification and performance requirements

NL-NEN, Polar and Nonpolar Components

  • NEN 10721-3-0-1994 Classification of environmental conditions. Part 3: Classification of groups of environmental parameters and their severities. Introduction (IEC 721-3-0:1984+A1:1987)

Professional Standard - Agriculture, Polar and Nonpolar Components

  • NY/T 1860.13-2016 Guidelines on the determination of physico-chemical properties of pesticides.Part 13:Miscibility with hydrocarbon oil
  • NY/T 1860.13-2010 Guidance on the determination of physico-chemical properties for pesticides.Part 13:Miscibility with hydrocarbon oil

AENOR, Polar and Nonpolar Components

  • UNE-EN 62561-5:2012 Lightning Protection System Components (LPSC) -- Part 5: Requirements for earth electrode inspection housings and earth electrode seals
  • UNE-EN 62561-2:2012 Lightning Protection System Components (LPSC) - Part 2: Requirements for conductors and earth electrodes
  • UNE-EN 15048-2:2017 Non-preloaded structural bolting assemblies - Part 2: Fitness for purpose
  • UNE-EN 13631-7:2004 Explosives for civil uses - High explosives - Part 7: Determination of safety and reliability at extreme temperatures
  • UNE-EN 62259:2004 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Nickel-cadmium prismatic secondary single cells with partial gas recombination
  • UNE-EN 60721-3-7/A1:1998 CLASSIFICATION OF ENVIRONMENTAL CONDITIONS. PART 3: CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES. SECTION 7: POTABLE AND NON-STATIONARY USE.
  • UNE-EN 60721-3-7:1997 CLASSIFICATION OF ENVIRONMENTAL CONDITIONS. PART 3: CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETER AND THEIR SEVERITIES. SECTION 7: PORTABLE AND NON-STATIONARY USE.
  • UNE-EN ISO 636:2017 Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification (ISO 636:2017)
  • UNE-EN 61951-1:2014 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Portable sealed rechargeable single cells - Part 1: Nickel-cadmium

SE-SIS, Polar and Nonpolar Components

  • SIS SS-ISO 2128:1984 Anodizing of aluminium and its alloys - Determination of thickness of anodic oxide coatings - Non-destructive mea- surement by split-beam microscope
  • SIS SS 11 70 30-1980 Anodizing of aluminium and its alloys — Determination of thickness of anodic oxide coatings — Non-destructive measure ment by split-beam microscope

Japanese Industrial Standards Committee (JISC), Polar and Nonpolar Components

  • JIS C 8152-2:2012 Photometry of white light emitting diode for general lighting -- Part 2: LED modules and LED light engines
  • JIS H 8682-2:2013 Anodizing of aluminium and its alloys.Measurement of abrasion resistance of anodic oxidation coatings.Part 2: Abrasive jet abrasion resistance test
  • JIS C 8152-2 AMD 1:2014 Photometry of white light emitting diode for general lighting -- Part 2: LED modules and LED light engines (Amendment 1)
  • JIS H 8682-1:2013 Anodizing of aluminium and its alloys.Measurement of abrasion resistance of anodic oxidation coatings .Part 1: Abrasive-wheel-wear abrasion resistance test
  • JIS C 8159-2:2013 Non-integrated linear LED lamps with GX16t-5 cap for general lighting services.Part 2: Performance requirements
  • JIS H 8682-3:2013 Anodizing of aluminium and its alloys.Measurement of abrasion resistance of anodic oxidation coatings .Part 3: Falling sand abrasion resistance test
  • JIS D 5303-2:1997 Lead-acid traction batteries Part 2: Dimensions of cells and terminals and marking of polarity on cells
  • JIS C 8159-1:2013 Non-integrated linear LED lamps with GX16t-5 cap for general lighting services.Part 1: Safety specifications

ZA-SANS, Polar and Nonpolar Components

  • SANS 60254-2:2000 Lead-acid traction batteries Part 2: Dimensions of cells and terminals and marking of polarity on cells
  • SANS 53:2005 Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification
  • SANS 1808-5:2008 Water supply and distribution system components Part 5: Flexible connectors
  • SANS 1051-6:2006 Braking Part 6: Distribution of braking effort and compatibility of vehicles in combination

BE-NBN, Polar and Nonpolar Components

  • NBN C 58-254-2-1987 Accumulators Lead-acid traction batteries Part 2 : Dimensions of cells and terminals and marking of polarity on cells

United States Navy, Polar and Nonpolar Components

GM North America, Polar and Nonpolar Components

  • GM 9984171-1991 Waterborne Basecoat/2 Component Rigid Non - Urethane Clear System
  • GM 9984508-2014 Non-ISO Two Component Clearcoat for Waterborne or Solventborne Basecoats (Issue 3)

国家市场监督管理总局、中国国家标准化管理委员会, Polar and Nonpolar Components

  • GB/T 20833.4-2021 Rotating electrical machines—The winding insulation—Part 4: Measurement of insulation resistance and polarization index

American Society for Testing and Materials (ASTM), Polar and Nonpolar Components

  • ASTM D6558-22 Standard Test Method for Determination of TGA CO2 Reactivity of Baked Carbon Anodes and Cathode Blocks
  • ASTM D2358-89(1995)e1 Standard Test Method for Separation of Active Ingredient from Surfactant and Syndet Compositions
  • ASTM D2358-89(2009) Standard Test Method for Separation of Active Ingredient from Surfactant and Syndet Compositions
  • ASTM D2358-16 Standard Test Method for Separation of Active Ingredient from Surfactant and Syndet Compositions
  • ASTM D7932-14 Standard Specification for Printed, Pressure-Sensitive Adhesive Labels for Use in Extreme Distribution Environments
  • ASTM D7932-17 Standard Specification for Printed, Pressure-Sensitive Adhesive Labels for Use in Extreme Distribution Environments

International Telecommunication Union (ITU), Polar and Nonpolar Components

  • ITU-T G.8260-2015 Definitions and terminology for synchronization in packet networks (Study Group 15)
  • ITU-T X.134-1997 Portion Boundaries and Packet Layer Reference Events: Basis for Defining Packet-Switched Performance Parameters - Series X: Data Networks and Open System Communication Pulic Data Networks - Network Aspects Study Group 7; 15 pp
  • ITU-T G.8260 AMD 1-2013 Definitions and terminology for synchronization in packet networks Amendment 1 (Study Group 15)
  • ITU-T Y.1540-2007 Internet protocol data communication service ?IP packet transfer and availability performance parameters Study Group 12
  • ITU-T G.8261-2013 Timing and synchronization aspects in packet networks (Study Group 15)
  • ITU-T G.8260-2012 Definitions and terminology for synchronization in packet networks (Study Group 15)
  • ITU-T E.830 FRENCH-1992 Models for the Specification Evaluation and Allocation of Serveability and Service Integrity (Study Group II) 5 pp
  • ITU-T E.830 SPANISH-1992 Models for the Specification Evaluation and Allocation of Serveability and Service Integrity (Study Group II) 5 pp
  • ITU-T L.7-1988 Application of Joint Cathodic Protection

AT-ON, Polar and Nonpolar Components

  • ONORM EN 71-5-1993 Safety of toys - Part 5: Chemical toys (sets) other than experimental sets
  • OENORM EN 13631-7-2021 Explosives for civil uses - Explosives - Part 7: Determination of safety and reliability at extreme temperatures
  • ONORM B 4411-1974 Earthwork and foundation engineering; analysis of soil specimen; consistency limits; liquid and plastic limit tests

CEN - European Committee for Standardization, Polar and Nonpolar Components

  • PREN 13053-2017 Ventilation for buildings - Air handling units - Ratings and performance for units@ components and sections

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, Polar and Nonpolar Components

  • ITU-T X.134-1992 Portion Boundaries and Packet Layer Reference Events: Basis for Defining Packet-Switched Performance Parameters (Study Group VII; 12 pp)
  • ITU-T I.380-1999 Internet protocol data communication service – IP packet transfer and availability performance parameters (Study Group 13)
  • ITU-T Y.1540-2016 Internet protocol data communication service – IP packet transfer and availability performance parameters (Study Group 12)
  • ITU-T X.136-1992 Accuracy and Dependability Performance Values for Public Data Networks When Providing International Packet-Switched Services (Study Group VII; 20 pp)
  • ITU-T Y.2617-2016 Quality of service guaranteed mechanisms and performance model for public packet telecommunication data networks (Study Group 13)
  • ITU-T X.134-1989 Portion Boundaries and Packet Layer Reference Events: Basis for Defining Packet-Switched Performance Parameters - Data Communication Networks - Transmission@ Signalling and Switching@ Network Aspects@ Maintenance and Administrative Arrangements (Study Gro
  • ITU-T Q.3930-2012 Performance testing of distributed systems – Concepts and terminology (Study Group 11)

American National Standards Institute （ANSI), Polar and Nonpolar Components

  • ANSI S4.48-1992 Professional audio equipment - Application of connectors - Part 1: XLR-type polarity and gender
  • ANSI/ASTM F1973a:2013 Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems

WRC - Welding Research Council, Polar and Nonpolar Components

  • BULLETIN 254-1979 A CRITICAL EVALUATION OF PLASTIC BEHAVIOR DATA AND A UNIFIED DEFINITION OF PLASTIC LOADS FOR PRESSURE COMPONENTS ; INTERPRETIVE REPORT ON LIMIT ANALYSIS AND PLASTIC BEHAVIOR OF PIPING PRODUCTS

Society of Automotive Engineers (SAE), Polar and Nonpolar Components

  • SAE AS150D-2003 (R) Hose Assembly, Type Classifications of, Basic Performance and Fire Resistance

Standard Association of Australia （SAA）, Polar and Nonpolar Components

  • AS/NZS ISO 636:2022 Welding consumables — Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels — Classification

US-AAMA, Polar and Nonpolar Components

  • AAMA 612-2002 Voluntary Specification, Performance Requirements, and Test Procedures for Combined Coatings of Anodic Oxide and Transparent Organic Coatings on Architectural Aluminum
  • AAMA 612-2015 Voluntary Specification, Performance Requirements, and Test Procedures for Combined Coatings of Anodic Oxide and Transparent Organic Coatings on Architectural Aluminum

PT-IPQ, Polar and Nonpolar Components

  • NP EN 12373-3-2001 Aluminium and aluminium alloys Anodizing Part 3:Determination of thickness of anodic oxidation coatings.Non-destructive measurement by split-beam microscope
  • NP EN 12373-12-2001 Aluminium and aluminium alloys Anodizing Part 12:Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments

AWS - American Welding Society, Polar and Nonpolar Components

  • B2.1-BMG-2005 Base Metal Grouping for Welding Procedure and Performance Qualification
  • B2.1/B2.1M-BMG-2014 Base Metal Grouping for Welding Procedure and Performance Qualification (3rd Edition)

CH-SNV, Polar and Nonpolar Components

IT-UNI, Polar and Nonpolar Components

SAE - SAE International, Polar and Nonpolar Components

  • SAE J457-2017 Chemical Compositions@ Mechanical Property Limits@ and Dimensional Tolerances of SAE Wrought Aluminum Alloys

(U.S.) Ford Automotive Standards, Polar and Nonpolar Components

  • FORD WSK-M11P55-A2-2013 PERFORMANCE, ADHESIVE, POLYURETHANE, TWO COMPONENT, NON CONDUCTIVE, REPAIR (Shown on FORD WSK-M11P55-A)

Indonesia Standards, Polar and Nonpolar Components

IN-BIS, Polar and Nonpolar Components

工业和信息化部, Polar and Nonpolar Components

  • SJ/T 11461.2-2016 Organic Light Emitting Diode Display Devices Part 2: Basic Ratings and Characteristics
  • YD/T 3418-2018 Technical requirements for packet transport network (PTN) network traffic and performance monitoring and analysis

其他未分类, Polar and Nonpolar Components

TR-TSE, Polar and Nonpolar Components

  • TS 2441-1976 MEASUREMENTS OF THE ELECTRICAL PROPERTIES OF ELECTRONIC TUBES AND VALVES PART 1 : MEASUREMENT OF ELECTRODE CURRENT

Professional Standard - Machinery, Polar and Nonpolar Components

  • JB/T 8135.23-2013 Packaging of winding wires.Part 23:Cylindrical barrelled delivery spools.Specification for non-returnable spools made from thermoplastic material
  • JB/T 8135.33-2013 Packaging of winding wires.Part 33:Taper barrelled delivery spools.Specification for non- returnable spools made from thermoplastic material

未注明发布机构, Polar and Nonpolar Components

  • BS 7310:1990(2012) Specification for Ion - selective electrodes, reference electrodes, combination electrodes and ion - selective electrode meters for determination of ions in solution
  • BS EN IEC 62561-2:2018(2019) Lightning protection system components (LPSC) Part 2 : Requirements for conductors and earth electrodes
  • BS EN IEC 63115-1:2020 Secondary cells and batteries containing alkaline or other non - acid electrolytes — Sealed nickel - metal hydride cells and batteries for use in industrial applications Part 1 : Performance
  • BS EN 61951-1:2017 Secondary cells and batteries containing alkaline or other non - acid electrolytes - Secondary sealed cells and batteries for portable applications Part 1 : Nickel - Cadmium
  • BS 8290-2:1991(1999) Suspended ceilings — Part 2 : Specification for performance of components and assemblies
  • BS 6501-2:1991(1999) Flexible metallic hose assemblies — Part 2 : Specification for strip wound hoses and hose assemblies
  • BS 6130-1:1993(2007) Hose and hose assemblies for asphalt and bitumen — Part 1 : Specification for flexible metallic hose and hose assemblies
  • JIS K 6794-4:2023 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -- Determination of the resistance to internal pressure -- Part 4: Preparation of assemblies
  • BS 5760-20:1997(1998)*IEC 300-3-4:1996 Reliability of systems, equipment and components — Part 20 : Guide to the specification of dependability requirements
  • BS 5760-5:1991(1999) Reliability of systems, equipment and components — Part 5 : Guide to failure modes, effects and criticality analysis (FMEA and FMECA)

Professional Standard - Nuclear Industry, Polar and Nonpolar Components

  • EJ/T 1231.4-2008 Test method for analysis of impurity in diuranate.Part4: Determination of fluorine and chlorine by ion selective electrode

American Welding Society (AWS), Polar and Nonpolar Components

  • AWS B2.1/B2.1M-BMG-2014 Base Metal Grouping for Welding Procedure and Performance Qualification (3rd Edition)
  • WRC 120:1967 Part 1: The Properties and Microstructure of Spray-Quenched Thick-Section Steels

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Polar and Nonpolar Components

  • ASHRAE PH-97-10-1-1997 System Performance of a Split-Type Unit Having R-22 and R-407C as Working Fluids
  • ASHRAE AC-02-2-1-2002 Sensitivity Analysis of Heat Transfer from an Irradiated Window and Horizontal Louvered Blind Assembly

AT-OVE/ON, Polar and Nonpolar Components

  • OVE EN IEC 61960-4:2021 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for portable applications - Part 4: Coin secondary lithium cells, and batteries made from them (german version)

Audio Engineering Society, Polar and Nonpolar Components

  • AES 14-1992 AES Standard for Professional Audio Equipment - Application of Connectors, Part 1, XLR-Type Polarity and Gender 2004-03-03 Printing R(2004)

Professional Standard - Electron, Polar and Nonpolar Components

  • SJ/Z 9010.14-1987 Measurements of electrical properties of electronic tubes--Part 14: Methods of measurement of radar and osciloscope cathode-ray tubes
  • SJ/Z 9010.15-1987 Measurements of electrical properties of electronic tubes and valves--Part 15: Methods of measurement for spurious and unwanted electrode currents

National Aeronautics and Space Administration (NASA), Polar and Nonpolar Components

  • NASA NACA-RM-L53F24-1953 Effect of reduction in thickness from 6 to 2 percent and removal of the pointed tips on the subsonic static longitudinal stability characteristics of a 60 degrees triangular wing in combination with a fuselage

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Polar and Nonpolar Components

  • PREN 4632-004-2010 Welded and brazed assemblies for aerospace constructions Weldability and brazeability of materials Part 004: Homogeneous assemblies highly alloyed steels (Edition P 1)
  • PREN 4632-003-2008 Aerospace series Weldability and brazeability of materials in aerospace constructions Part 003: Homogeneous assemblies of unalloyed and low alloy steels (Edition P 1)

PL-PKN, Polar and Nonpolar Components

  • PN C94250-10-1991 Rubber and plastics hoses Determination of adhesion between components

AREMA - American Railway Engineering and Maintenance-of-Way Association, Polar and Nonpolar Components

  • 320-1959 Data and Sections Bolted Rigid Frogs ((See AREMA PORTFOLIO OF TRACKWORK PLANS))

European Association of Aerospace Industries, Polar and Nonpolar Components

  • AECMA PREN 4632-002-2007 Aerospace series Welded and brazed assemblies for aerospace constructions Weldability and brazeability of materials Part 002: Homogeneous assemblies aluminium and aluminium alloys Edition P1

  Polar and non-polar components, non-polar components, Polar and Nonpolar Components, polar components non-polar components.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved