ZH
RU
ES

iec voltage ratio test

iec voltage ratio test, Total:500 items.

In the international standard classification, iec voltage ratio test involves: Valves, Fluid power systems, Electricity. Magnetism. Electrical and magnetic measurements, Inorganic chemicals, Lamps and related equipment, Soil quality. Pedology, Electromechanical components for electronic and telecommunications equipment, Components and accessories for telecommunications equipment, Linear and angular measurements, Seals, glands, Transformers. Reactors, Electrical wires and cables, Fruits. Vegetables, Hydraulic energy engineering, Textile fibres, ENVIRONMENT. HEALTH PROTECTION. SAFETY, Wastes, Environmental protection, Waxes, bituminous materials and other petroleum products, Power stations in general, Farming and forestry, Electromagnetic compatibility (EMC), Earthworks. Excavations. Foundation construction. Underground works, Aerospace electric equipment and systems, Electrical engineering in general, Hand-held tools, Electric road vehicles, Insulating fluids, Protection against electric shock, Road vehicle systems, Refractories, Piezoelectric and dielectric devices, Electrical and electronic testing, Power transmission and distribution networks, Capacitors, Environmental testing, Installations in buildings, Integrated circuits. Microelectronics, Road engineering, Mechanical structures for electronic equipment, Protection against fire, Pipeline components and pipelines, Insulation, Electrical accessories, Industrial furnaces, Rectifiers. Convertors. Stabilized power supply, Insulating materials, Shipbuilding and marine structures in general, Electrical equipment for working in special conditions, Thermodynamics and temperature measurements, Organic chemicals, Optoelectronics. Laser equipment, Welding, brazing and soldering, Test conditions and procedures in general, Telecontrol. Telemetering, Industrial automation systems, Internal combustion engines for road vehicles, Construction materials, Fluid storage devices, Burners. Boilers, Aerospace engines and propulsion systems, Compressors and pneumatic machines, Electronic tubes, Testing of metals, Surface treatment and coating, Graphic technology, Vacuum technology, Solar energy engineering, Semiconductor devices, Paper and board, Petroleum products in general, Equipment for the chemical industry, Applications of information technology.

Japanese Industrial Standards Committee (JISC), iec voltage ratio test

JIS B 8651:2002 Test methods for electro-hydraulic proportional pressure relief valves
JIS B 8652:1989 Test methods for electro-hydraulic proportional pressure reducing valves and electro-hydraulic proportional pressure reducing and relieving valves
JIS B 8651:1989 Test methods for electro-hydraulic proportional pressure relief valves
JIS B 8653:1989 Test methods for electro-hydraulic proportional metering valves
JIS B 8653:2002 Test methods for electro-hydraulic proportional metering valves
JIS B 8652:2002 Test methods for electro-hydraulic proportional pressure relief valves and electro-hydraulic proportional pressure reducing and relieving valves
JIS B 8656:2002 Test methods for electro-hydraulic proportional bypass flow control valves
JIS B 8654:1989 Test methods for electro-hydraulic proportional series flow control valves
JIS B 8656:1989 Test methods for electro-hydraulic proportional bypass flow control valves
JIS B 8654:2002 Test methods for electro-hydraulic proportional series flow control valves
JIS B 8657:2002 Test methods for electro-hydraulic proportional directional bypass flow control valves
JIS B 8655:1989 Test methods for electro-hydraulic proportional directional series flow control valves
JIS B 8657:1989 Test methods for electro-hydraulic proportional directional bypass flow control valves
JIS B 8655:2002 Test methods for electro-hydraulic proportional directional series flow control valves
JIS C 1506:1981 Testing methods for electronic voltmeters
JIS C 5402-4-1:2005 Connectors for electronic equipment -- Tests and measurements -- Part 4-1: Voltage stress tests -- Test 4a: Voltage proof
JIS D 5005:1989 Nominal voltages and test voltages for automotive electric equipments
JIS C 61340-4-7:2011 Electrostatics -- Part 4-7: Standard test methods for specific applications -- Ionization
JIS C 6011-3:2015 Mechanical structures for electronic equipment -- Tests for IEC 60917 and IEC 60297 -- Part 3: Electromagnetic shielding performance tests for cabinets and subracks
JIS C 6011-2:2015 Mechanical structures for electronic equipment -- Tests for IEC 60917 and IEC 60297 -- Part 2: Seismic tests for cabinets and racks
JIS C 5402-4-3:2005 Connectors for electronic equipment -- Tests and measurements -- Part 4-3: Voltage stress tests -- Test 4c: Voltage proof of pre-insulated crimp barrels
JIS C 1003:1976 Testing methods for digital voltmeters
JIS B 8661:2002 Hydraulic fluid power -- Test method for electrically controlled oil hydraulic pumps
JIS C 5402-4-2:2005 Connectors for electronic equipment -- Tests and measurements -- Part 4-2: Voltage stress tests -- Test 4b: Partial discharge

NL-NEN, iec voltage ratio test

NEN 10524-1993 Direct-current resistive volt ratio boxes (IEC 524:1975+A1:1981)
NEN 10427-1993 Synthetic testing of high-voltage alternating current circuit breakers (IEC 427:1989)
NEN 10734-1993 Hard water to be used for testing the performance of some household electrical appliances (IEC 734:1993)
NEN 5661-1984 Rubber and plastics hoses and hose assemblies - Ratio of testing and bursting pressures to design pressures
NEN 10831-2-1994 Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1000 V. Part 2: Ageing test, self-healing test and destruction test (IEC 831-2:1988+A1:1991+A2:1993, modified)
NEN 10507-1993 Artificial pollution of high-voltage insulators for a.c. systems (IEC 507:1991)
NEN 10068-2-1-1994 Climatic and mechanical testing of electrical equipment. Part 2-1: tests. Test A: Cold (IEC 68-2-1:1990)

Korean Agency for Technology and Standards (KATS), iec voltage ratio test

KS B 6508-1991(2011) Test Methods for Electro-hydraulic Proportiona1 Pressure Reducing Valves and Electro-hydraulic Proportiona1 Pressure Reducing and Relieving Valves
KS B 6507-1991(2011) Test Methods for Electro-hydraulic Proportional Pressure Relief Valves
KS B 6508-1991 Test Methods for Electro-hydraulic Proportiona1 Pressure Reducing Valves and Electro-hydraulic Proportiona1 Pressure Reducing and Relieving Valves
KS B 6546-2017(2022) Earth-moving machinery — Electro-hydraulic proportional pressure reducing valves used in hydraulic pumps applied in excavators — Performance testing methods
KS B 6509-1991 Test Methods for Electro-hydraulic Proportional Metering Valves
KS C IEC 60512-25-7-2009(2009) Connectors for electronic equipment－Tests and measurements－Part 25-7：Test 25g：Impedance, reflection coefficient, and voltage standing wave ratio(VSWR)
KS B 6507-1991 Test Methods for Electro-hydraulic Proportional Pressure Relief Valves
KS F 2353-2010(2022) Standard test method for specific bulk gravity of compacted asphalt mixtures
KS F 2353-1985 Standard test method for specific bulk gravity of compacted asphalt mixtures
KS C IEC 60695-10-2:2001 Fire hazard testing－Part 10：Guidance and test methods for the minimization of the effects of abnormal heat on electrotechnical products involved in fires－Section 2：Method for testing products made from non-metallic materials for resistance to heat using t
KS B 6512-1991(2016) Test Methods for Electro-hydraulic Proportional Bypass F1ow Control Valves
KS C IEC 60512-4-1-2005(2010) Connectors for electronic equipment－Tests and measurements－Part 4－1：Voltage stress tests－Test 4a：Voltage proof
KS C 0901-1980(2000) HIGH-VOLTAGE TEST TECHNIQUES
KS C 0901-1995 HIGH-VOLTAGE TEST TECHNIQUES
KS C 0901-1985 HIGH-VOLTAGE TEST TECHNIQUES
KS C IEC 60512-4-1:2005 Connectors for electronic equipment-Tests and measurements-Part 4-1:Voltage stress tests-Test 4a:Voltage proof
KS C IEC 60512-4-1:2014 Connectors for electronic equipment-Tests and measurements-Part 4-1:Voltage stress tests-Test 4a:Voltage proof
KS B 6510-1991 Test Methods for Electro-hydraulic Proportional Series Flow Control Valves
KS B 6512-1991(2021) Test Methods for Electro-hydraulic Proportional Bypass F1ow Control Valves
KS B 6510-1991(2021) Test Methods for Electro-hydraulic Proportional Series Flow Control Valves
KS C 0902-2011 Impulse voltage testing for transformers
KS C 0902-1982 Impulse voltage testing for transformers
KS C IEC 60512-25-1:2004 Connectors for electronic equipment-Tests and measurements-Part 25-1:Test 25a-Crosstalk ratio
KS C IEC 60512-25-1:2014 Connectors for electronic equipment－Tests and measurements－Part 25－1：Test 25a－Crosstalk ratio
KS B 6513-1991(2016) Test Methods for Electro-hydraulic Proportional Directional Bypass Flow Control Va1ves
KS C IEC 60512-4-3:2002 Connectors for electronic equipment-Tests and measurements-Part 4-3:Voltage stress tests-Test 4c:Voltage proof ofpre-insulated crimp barrels
KS C IEC 60512-4-3:2014 Connectors for electronic equipment－Tests and measurements－Part 4－3：Voltage stress tests－Test 4c：Voltage proof ofpre－insulated crimp barrels
KS R 5013-1990(2000) NOMINAL VOLTAGES AND TEST VOLTAGES FOR AUTOMOTIVE ELECTRIC EQUIPMENTS
KS R 5013-1974 NOMINAL VOLTAGES AND TEST VOLTAGES FOR AUTOMOTIVE ELECTRIC EQUIPMENTS
KS F 2438-2017(2022) Testing method for static modulus of elasticity and Poission′s ratio in compression of cylindrical concrete specimens
KS C IEC 60512-4-3-2002(2013) Connectors for electronic equipment－Tests and measurements－Part 4－3：Voltage stress tests－Test 4c：Voltage proof ofpre－insulated crimp barrels
KS C 1001-1970(2013) IMPULES VOLTAGE TESTING FOR INSTRUMENT TRANSFORMERS
KS C 1001-1987 IMPULES VOLTAGE TESTING FOR INSTRUMENT TRANSFORMERS
KS B 6512-1991 Test Methods for Electro-hydraulic Proportional Bypass F1ow Control Valves
KS B 6511-1991 Test Methods for Electro-Hydraulic Proportional Directional Series Flow Control Valves
KS B 6513-1991(2021) Test Methods for Electro-hydraulic Proportional Directional Bypass Flow Control Va1ves
KS C 1001-1970 Impulse voltage testing for instrument transformers
KS C IEC 60068-2-39:2002 Environmental testing－Part 2：Tests－Test Z/AMD：Combined sequential cold, low air pressure and damp heat test
KS C IEC 61587-3-2003(2008) Mechanical structures for electronic equipment－Tests for IEC 60917 and IEC 60297－Part 3：Electromagnetic shielding performance tests for cabinets, racks and subracks
KS C 0229-2001 Basic environmental testing procedures Part 2 : Tests, Test M : Low air pressure
KS C IEC 60230:2005 Impulse tests on cables and their accessories
KS C IEC 60270:2006 High-voltage test techniques－Partial discharge measurements
KS C 6047-1995 Testing methods of power transformers for electronic equipment
KS C IEC 61587-3:2003 Mechanical structures for electronic equipment-Tests for IEC 60917 and IEC 60297-Part 3:Electromagnetic shielding performance tests for cabinets, racks and subracks
KS C IEC 61587-3:2014 Mechanical structures for electronic equipment－Tests for IEC 60917 and IEC 60297－Part 3：Electromagnetic shielding performance tests for cabinets, racks and subracks
KS F 2496-2012 Testing method for bulk specific gravity and density of compacted asphalt mixtures using automatic vacuum sealing method
KS W 0926-2014 Environmental tests for aircraft equipment - Insulation resistance and high voltage tests for electrical equipment
KS B 6513-1991 Test Methods for Electro-hydraulic Proportional Directional Bypass Flow Control Va1ves
KS C IEC 60512-4-2:2002 Connectors for electronic equipment-Tests and measurements-Part 4-2:Voltage stress tests-Test 4b:Partial discharge
KS C IEC 60512-4-2-2002(2013) Connectors for electronic equipment－Tests and measurements－Part 4－2：Voltage stress tests－Test 4b：Partial discharge
KS C IEC 60512-4-2:2014 Connectors for electronic equipment－Tests and measurements－Part 4－2：Voltage stress tests－Test 4b：Partial discharge
KS B 6516-1991 Test Methods for Electronically Controlled Oil Hydraulic Pumps

German Institute for Standardization, iec voltage ratio test

DIN EN 60524:1994-08 Direct-current resistive volt ratio boxes (IEC 60524:1975 + A1:1981); German version EN 60524:1993
DIN 51911:1997 Testing of carbon materials - Determination of specific electrical resistance by the current-voltage method - Solid matters
DIN EN 60524/A2:1999-01 Direct-current resistive volt ratio boxes; Amendment A2 (IEC 60524:1975/A2:1997); German version EN 60524:1993/A2:1997
DIN EN IEC 61169-1-4:2021 Radio-frequency connectors - Part 1-4: Electrical test methods - Voltage standing wave ratio, return loss and reflection coefficient (IEC 61169-1-4:2020); German version EN IEC 61169-1-4:2020
DIN EN 60512-25-7:2005 Connectors for electronic equipment - Tests and measurements - Part 25-7: Test 25g - Impedance, reflection coefficient and standing voltage wave ratio (VSWR) (IEC 60512-25-7:2004); German version EN 60512-25-7:2005
DIN EN 60512-4-3:2003 Connectors for electronic equipment - Tests and measurements - Part 4-3: Voltage stress tests; Test 4c: Voltage proof of pre-insulated crimp barrels (IEC 60512-4-3:2002); German version EN 60512-4-3:2002
DIN EN 61481:2002 Live working - Portable phase comparators for voltages of 1 kV to 36 kV a.c. (IEC 61481:2001); German version EN 61481:2001
DIN EN 2591-221:2009 Aerospace series - Elements of electrical and optical connection - Test methods - Part 221: Voltage Standing Wave Ratio (VSWR); German and English version EN 2591-221:2007
DIN EN 60512-14-5:2006 Connectors for electronic equipment - Tests and measurements - Part 14-5: Sealing tests - Test 14e: Immersion at low air pressure (IEC 60512-14-5:2006); German version EN 60512-14-5:2006
DIN 51911:2020-12 Testing of carbonaceous materials - Determination of specific electrical resistance by the current-voltage method - Solid materials
DIN EN 60512-4-1:2004 Connectors for electronic equipment - Tests and measurements - Part 4-1: Voltage stress tests - Test 4a: Voltage proof (IEC 60512-4-1:2003); German version EN 60512-4-1:2003
DIN EN 60512-4-2:2003 Connectors for electronic equipment - Tests and measurements - Part 4-2: Voltage stress tests; Test 4b: Partial discharge (IEC 60512-4-2:2002); German version EN 60512-4-2:2002
DIN EN 61180:2017 High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment (IEC 61180:2016); German version EN 61180:2016
DIN EN 61587-2:2012 Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 2: Seismic tests for cabinets and racks (IEC 61587-2:2011); German version EN 61587-2:2011
DIN EN IEC 61238-1-1:2020 Compression and mechanical connectors for power cables - Part 1-1: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages up to 1 kV (Um = 1,2 kV) tested on non-insulated conductors (IEC 61238-1-1:2018)
DIN EN 60512-25-1:2002 Connectors for electronic equipment - Tests and measurements - Part 25-1: Test 25a: Crosstalk ratio (IEC 60512-25-1:2001); German version EN 60512-25-1:2001
DIN EN 60885-3:2015 Electrical test methods for electric cables - Part 3: Test methods for partial discharge measurements on lengths of extruded power cables (IEC 60885-3:2015); German version EN 60885-3:2015
DIN EN 60270:2016 High-voltage test techniques - Partial discharge measurements (IEC 60270:2000 + Cor.:2001 + A1:2015); German version EN 60270:2001 + A1:2016
DIN EN 60512-11-11:2003 Connectors for electronic equipment - Tests and measurements - Part 11-11: Climatic tests; Test 11k: Low air pressure (IEC 60512-11-11:2002); German version EN 60512-11-11:2002
DIN EN 50395/A1:2012 Electrical test methods for low voltage energy cables; German version EN 50395:2005/A1:2011
DIN EN 50395:2006 Electrical test methods for low voltage energy cables; German version EN 50395:2005
DIN EN 61628-2:2008 Corrugated pressboard and presspaper for electrical purposes - Part 2: Methods of test (IEC 61628-2:1998 + A1:2007); German version EN 61628-2:1999 + A1:2007
DIN IEC/TS 60871-2:2015 Shunt capacitors for AC power systems having a rated voltage above 1 000 V - Part 2: Endurance testing (IEC/TS 60871-2:2014)
DIN EN 2591-704:2002 Aerospace series - Elements of electrical and optical connection; Test methods - Part 704: Electrical elements; Measurement of turns ratio on a transformer used in a coupler; German and English version EN 2591-704:2001
DIN EN 60512-4-3:2003-01 Connectors for electronic equipment - Tests and measurements - Part 4-3: Voltage stress tests; Test 4c: Voltage proof of pre-insulated crimp barrels (IEC 60512-4-3:2002); German version EN 60512-4-3:2002 / Note: DIN IEC 60512-2 (1994-05) remains valid ...
DIN EN IEC 61238-1-2:2020 Compression and mechanical connectors for power cables - Part 1-2: Test methods and requirements for insulation piercing connectors for power cables for rated voltages up to 1 kV (Um = 1,2 kV) tested on insulated conductors (IEC 61238-1-2:2018); German ve
DIN EN IEC 61238-1-3:2020 Compression and mechanical connectors for power cables - Part 1-3: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages above 1 kV (Um = 1,2 kV) up to 36 kV (Um = 42 kV) tested on non-insulated conduc
DIN EN IEC 61643-331:2021 Components for low-voltage surge protection - Part 331: Performance requirements and test methods for metal oxide varistors (MOV) (IEC 61643-331:2020); German version EN IEC 61643-331:2020
DIN IEC/TS 62910:2017 Utility-interconnected photovoltaic inverters - Test procedure for low voltage ride-through measurements (IEC/TS 62910:2015)
DIN EN IEC 60512-9-5:2021 Connectors for electrical and electronic equipment - Tests and measurements - Part 9-5: Endurance tests - Test 9e: Current loading, cyclic (IEC 60512-9-5:2020); German version EN IEC 60512-9-5:2020
DIN EN IEC 60512-11-1:2021 Connectors for electrical and electronic equipment - Tests and measurements - Part 11-1: Climatic tests - Test 11a - Climatic sequence (IEC 60512-11-1:2019); German version EN IEC 60512-11-1:2019
DIN EN 60270:2001 High-voltage test techniques - Partial discharge measurement (IEC 60270:2000); German version EN 60270:2001
DIN EN 50396/A1:2012 Non electrical test methods for low voltage energy cables; German version EN 50396:2005/A1:2011
DIN EN 50396:2006 Non electrical test methods for low voltage energy cables; German version EN 50396:2005
DIN EN 60230:2003 Impulse tests on cables and their accessories (IEC 60230:1966); German version EN 60230:2002
DIN EN 60060-3:2006 High voltage test techniques - Part 3: Definitions and requirements for on-site tests (IEC 60060-3:2006); German version EN 60060-3:2006
DIN EN 60811-508:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths (IEC 60811-508:2012); German version EN 60811-508:2012
DIN EN 61083-2:2013 Instruments and software used for measurement in high-voltage and high-current tests.Part 2: Requirements for software for tests with impulse voltages and currents (IEC 61083-2:2013); German version EN 61083-2:2013, with CD-ROM
DIN EN IEC 60779:2021 Installations for electroheating and electromagnetic processing - Test methods for electroslag remelting furnaces (IEC 60779:2020); German version EN IEC 60779:2020
DIN EN ISO 17654:2011-12 Resistance welding - Destructive tests of welds - Pressure test of resistance seam welds (ISO 17654:2011); German version EN ISO 17654:2011
DIN EN 61587-3:2007 Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 3: Electromagnetic shielding performance tests for cabinets, racks and subracks (IEC 61587-3:2006); German version EN 61587-3:2006
DIN EN 61481-1:2015 Live working - Phase comparators - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c. (IEC 61481-1:2014); German version EN 61481-1:2014

Lithuanian Standards Office , iec voltage ratio test

LST EN 60524+A2-2000 Direct-current resistive volt ratio boxes (IEC 60524:1975+A1:1981+A2:1997)
LST EN 62006-2011 Hydraulic machines - Acceptance tests of small hydroelectric installations (IEC 62006:2010)
LST EN 60229-2008 Electric cables - Tests on extruded oversheaths with a special protective function (IEC 60229:2007)
LST EN 60512-25-7-2005 Connectors for electronic equipment. Tests and measurements. Part 25-7: Test 25g - Impedance, reflection coefficient and voltage standing wave ratio (VSWR) (IEC 60512-25-7:2004)
LST EN 60885-3-2015 Electrical test methods for electric cables - Part 3: Test methods for partial discharge measurements on lengths of extruded power cables (IEC 60885-3:2015)
LST EN 62230-2008 Electric cables - Spark-test method (IEC 62230:2006)
LST EN IEC 61169-1-4:2020 Radio-frequency connectors - Part 1-4: Electrical test methods - Voltage standing wave ratio, return loss and reflection coefficient (IEC 61169-1-4:2020)
LST EN 60076-4-2003 Power transformers. Part 4: Guide to the lightning impulse and switching impulse testing. Power transformers and reactors (IEC 60076-4:2002)
LST EN 60831-2-2000 Shunt capacitors of the self-healing type for a.c. power systems having a rated voltage up to and including 1kV Part 2: Ageing test, self-healing test and destruction test) (IEC 60831-2:1995)
LST EN 60695-10-2-2014 Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method (IEC 60695-10-2:2014)
LST EN 60270-2002 High-voltage test techniques. Partial discharge measurements (IEC 60270:2000)
LST EN 60437-2001 Radio interference test on high-voltage insulators (IEC 60437:1997)
LST EN 60703-2009 Test methods for electroheating installations with electron guns (IEC 60703:2008)
LST EN 62501-2009 Voltage sourced converter (VSC) valves for high-voltage direct curent (HVDC) power transmission - Electrical testing (IEC 62501:2009)
LST EN 60641-2-2004 Pressboard and presspaper for electrical purposes. Part 2: Methods of tests (IEC 60641-2:2004)
LST EN 60512-25-1-2002 Connectors for electronic equipment. Tests and measurements. Part 25-1: Test 25a: Crosstalk ratio (IEC 60512-25-1:2001)
LST EN 61481-2002 Live working. Portable phase comparators for voltages from 1 kV to 36 kV a.c. (IEC 61481:2001)
LST EN 60811-508-2012 Electric and optical fibre cables - Test methods for non-metallic materials -- Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths (IEC 60811-508:2012)
LST EN 61481-2002/A2-2005 Live working - Portable phase comparators for use on voltages from 1 kV to 36 kV a.c. (IEC 61481:2001/A2:2004, modified)
LST 1745.2-2001 Performance and testing of teleprotection equipment of power systems. Part 2: Analogue comparison systems [HD 543.2 S1:1995 (IEC 60834-2:1993, modifikuotas)]
LST EN 61643-11-2012 Low-voltage surge protective devices -- Part 11: Surge protective devices connected to low-voltage power systems - Requirements and test methods (IEC 61643-11:2011, modified)
LST EN 60512-4-1-2004 Connectors for electronic equipment. Tests and measurements. Part 4-1: Voltage stress tests. Test 4a: Voltage proof (IEC 60512-4-1:2003)
LST EN 61481-2002/A1-2002 Live working. Portable phase comparators for voltages from 1 kV to 36 kV a.c. (IEC 61481:2001/A1:2002)
LST EN 61558-2-12-2011 Safety of transformers, reactors, power supply units and combinations thereof -- Part 2-12: Particular requirements and tests for constant voltage transformers and power supply units for constant voltage (IEC 61558-2-12:2011)
LST HD 525.2 S1+A1-2002 Shunt capacitors for a.c. power systems having a rated voltage above 1 kV -- Part 2: Endurance testing IEC 60883:1987)
LST EN 61621-2001 Dry solid insulating materials. Resistance test to high-voltage, low-current arc discharges (IEC 61621:1997)
LST EN 60779-2006 Industrial electroheat equipment. Test methods for electroslag remelting furnaces (IEC 60779:2005)
LST EN 60512-4-3-2003 Connectors for electronic equipment. Tests and measurements. Part 4-3: Voltage stress tests. Test 4c: Voltage proof of pre-insulated crimp barrels (IEC 60512-4-3:2002)
LST EN 60811-402-2012 Electric and optical fibre cables - Test methods for non-metallic materials -- Part 402: Miscellaneous tests - Water absorption tests (IEC 60811-402:2012)
LST EN 60507-2014 Artificial pollution tests on high-voltage ceramic and glass insulators to be used on a.c. systems (IEC 60507:2013)
LST EN 62047-10-2011 Semiconductor devices - Micro-electromechanical devices -- Part 10: Micro-pillar compression test for MEMS materials (IEC 62047-10:2011)
LST EN 50395-2005 Electrical test methods for low voltage energy cables
LST EN 50395-2005/A1-2011 Electrical test methods for low voltage energy cables
LST EN 60676-2012 Industrial electroheating equipment - Test methods for direct arc furnaces (IEC 60676:2011)
LST EN 60683-2012 Industrial electroheating equipment - Test methods for submerged-arc furnaces (IEC 60683:2011)
LST EN 60454-2-2008 Pressure-sensitive adhesive tapes for electrical purposes - Part 2: Methods of test (IEC 60454-2:2007)
LST EN ISO 17654:2011 Resistance welding - Destructive tests of welds - Pressure test of resistance seam welds (ISO 17654:2011)

European Committee for Electrotechnical Standardization（CENELEC）, iec voltage ratio test

EN 60512-25-7:2005 Connectors for electronic equipment Tests and measurements Part 25-7: Test 25g Impedance, reflection coefficient and voltage standing wave ratio (VSWR)
EN 61180-2:1994 High-Voltage Test Techniques for Low-Voltage Equipment - Part 2: Test Equipment
EN 60270:2001 High-Voltage Test Techniques - Partial Discharge Measurements
EN 60437:1997 Radio Interference Test on High-Voltage Insulators
EN 60512-4-1:2003 Connectors for electronic equipment Tests and measurements Part 4-1: Voltage stress tests Test 4a: Voltage proof
EN 60512-25-1:2001 Connectors for Electronic Equipment - Tests and Measurements Part 25-1: Test 25a - Crosstalk Ratio
EN 61180-1:1994 High-Voltage Test Techniques for Low-Voltage Equipment Part 1: Definitions, Test and Procedure Requirements
EN 60512-4-3:2002 Connectors for Electronic Equipment - Tests and Measurements - Part 4-3: Voltage Stress Tests - Test 4c: Voltage Proof of Pre-Insulted Crimp Barrels
EN 60512-4-2:2002 Connectors for Electronic Equipment - Tests and Measurements Part 4-2: Voltage Stress Tests - Test 4b: Partial Discharge
EN 60885-3:2003 Electrical test methods for electric cables Part 3: Test methods for partial discharge measurements on lengths of extruded power cables (Remains Current)
EN 60230:2002 Impulse Tests on Cables and Their Accessories
EN 61621:1997 Dry, Solid Insulating Materials - Resistance Test to High-Voltage, Low-Current Arc Discharges
EN 61000-4-11:2004 Electromagnetic compatibility (EMC) Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
EN 60512-11-11:2002 Connectors for Electronic Equipment - Tests and Measurements - Part 11-11: Climatic Tests - Test 11k: Low Air Pressure
EN 60512-14-5:2006 Connectors for electronic equipment - Tests and measurements Part 14-5: Sealing tests - Test 14e: Immersion at low air pressure
EN 60156:1995 Insulating Liquids Determination of the Breakdown Voltage at Power Frequency Test Method
EN 61442:2005 Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 36 kV (Um = 42 kV)
EN 60885-2:2003 Electrical test methods for electric cables Part 2: Partial discharge tests
EN 60076-4:2002 Power Transformers - Part 4: Guide to the Lightning Impulse and Switching Impulse Testing - Power Transformers and Reactors
HD 598 S1-1992 Test Methods for Direct Arc Furnaces
EN 61000-4-29:2000 Electromagnetic Compatibility (EMC) Part 4-29: Testing and Measurement Techniques - Voltage Dips, Short Interruptions and Voltage Variations on D.C. Input Power Port Immunity Tests
EN 60512-6-2:2002 Connectors for Electronic Equipment - Tests and Measurements - Part 6-2: Dynamic Stress Tests - Test 6b: Bump
EN 60068-2-66:1994 Environmental Testing Part 2: Test Methods Test Cx: Damp Heat, Steady State (Unsaturated Pressurized Vapour)
EN 60068-2-41:1999 Environmental Testing Part 2: Tests - Test Z/BM: Combined Dry Heat/Low Air Pressure Tests
EN 60068-2-40:1999 Environmental Testing Part 2: Tests - Test Z/AM: Combined Cold/Low Air Pressure Tests
EN 61587-2:2011 Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 2: Seismic tests for cabinets and racks
EN 60931-2:1996 Shunt Power Capacitors of the Non-Self-Healing Type for a.c. Systems Having a Rated Voltage up to and Including 1 kV Part 2: Ageing Test and Destruction Test
EN 61280-2-4:1998 Fibre Optic Communication Subsystem Basic Test Procedures - Part 2.4: Test Procedures for Digital Systems Bit-Rate Tolerance Measurement
HD 48 S1-1988 Impulse Tests on Cables and Their Accessories
EN 61000-4-14:1999 Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase (Incorporates Amendment A2: 2009)
EN 60512-11-2:2002 Connectors for Electronic Equipment - Tests and Measurements Part 11-2: Climatic Tests - Test 11b: Combined/Sequential Cold, Low Air Pressure and Damp Heat
EN 60512-2-2:2003 Connectors for electronic equipment - Tests and measurements Part 2-2: Electrical continuity and contact resistance tests - Test 2b: Contact resistance - Specified test current method
EN 61238-1:2003 Compression and mechanical connectors for power cables for rated voltages up to 36 kV (Um = 42 kV) Part 1: Test methods and requirements
EN 60512-3-1:2002 Connectors for electronic equipment Tests and measurements Part 3-1: Insulation tests Test 3a: Insulation resistance

Taiwan Provincial Standard of the People's Republic of China, iec voltage ratio test

CNS 10906-1994 Method of Test for Luminance Ratio of Lamps
CNS 11236-1991 Basic Environmental Testing Procedures Part 2 : Tests, Test M : Low Air Pressure
CNS 8759-1987 Method of Test for Bulk Specific Gravity of Compacted Bituminous Mixtures Using Saturated Surface-Dry Specimens
CNS 8757-1987 Method of Test for Bulk Specific Gravity and Density of Compacted Bituminous Mixtyres Using Paraffin- Coated Specimens
CNS 3626-1985 Voltage Endurance Testing Method for Electronic Components
CNS 12867-1991 Basic Environmental Testing Procedures Part 2 : Tests-Test Z/AM : Combined Dry Heat/Low Air Pressure Tests
CNS 12866-1991 Basic Environmental Testing Procedures Part 2 : Tests-Test Z/AM : Combined Cold/Low Air Pressure Tests

Standard Association of Australia （SAA）, iec voltage ratio test

AS 1289.5.4.1:2007 Methods of testing soils for engineering purposes - Soil compaction and density tests - Compaction control test - Dry density ratio, moisture variation and moisture ratio
AS 1289.5.4.1:2007(R2016) Methods of testing soils for engineering purposes - Soil compaction and density tests - Compaction control test - Dry density ratio, moisture variation and moisture ratio
AS/NZS 2891.14.5:2014
AS 1289.5.4.3:2006 Methods of testing soils for engineering purposes - Soil compaction and density tests - Compaction control test - Dry density ratio and moisture ratio using statistical selection of reference values
AS/NZS 61000.4.11:2005 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests (IEC 61000-4-11, Ed. 2.0 (2004) MOD)
AS 1289.5.7.1:2006 Methods of testing soils for engineering purposes - Soil compaction and density tests - Compaction control test - Hilf density ratio and Hilf moisture variation (rapid method)
AS/NZS 60076.3:2008 Power transformers - Insulation levels, dielectric tests and external clearances in air (IEC 60076-3, Ed. 2 (2000) MOD)
AS 4037:1999 Pressure equipment - Examination and testing
AS/NZS 61000.4.34:2007 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than 16 A per phase (IEC 61000-4-34, Ed. 1.0 (2005) MOD)

British Standards Institution (BSI), iec voltage ratio test

BS EN 60512-25-7:2005 Connectors for electronic equipment - Tests and measurements - Test 25g - Impedance, reflection coefficient and voltage standing wave ratio (VSWR)
BS EN 60512-4-1:2003 Connectors for electronic equipment - Tests and measurements - Voltage stress tests - Test 4a - Voltage proof
23/30470496 DC BS IEC 61196-1-105. Coaxial communication cables - Part 1-105. Electrical test methods. Test for withstand voltage of cable dielectric
BS EN 3475-812:2009 Aerospace series — Cables, electrical, aircraft use — Test methods Part 812: Return loss (VSWR)
BS EN 60512-4-3:2002 Connectors for electronic equipment - Tests and measurements - Voltage stress tests - Test 4c - Voltage proof of pre-insulated crimp barrels
BS 5099:2004 Electric cables - Voltage levels for spark testing
BS EN 61587-3:2013 Mechanical structures for electronic equipment. Tests for IEC 60917 and IEC 60297. Electromagnetic shielding performance tests for cabinets and subracks
BS EN 61587-2:2011 Mechanical structures for electronic equipment. Tests for IEC 60917 and IEC 60297. Seismic tests for cabinets and racks
BS EN 2591-221:2008 Aerospace series - Elements of electrical and optical connection - Test methods - Voltage standing wave ratio (VSWR)
BS EN 2591-221:2007 Aerospace series - Elements of electrical and optical connection - Test methods - Part 221: Voltage Standing Wave Ratio (VSWR)
HB 10210-2002 High Voltage Engineering and Testing
20/30431958 DC BS EN IEC 60437. Radio interference test on high-voltage insulators
BS EN 60512-4-2:2002 Connectors for electronic equipment - Tests and measurements - Voltage stress tests - Test 4b - Partial discharge
BS EN 61587-3:2006 Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297: Electromagnetic shielding performance tests for cabinets, racks and sub-racks
BS EN 3475-705:2005 Cables, electrical, aircraft use - Test methods - Part 705: Contrast measurement
BS EN 3475-705:2006 Aerospace series. Cable, electrical, aircraft use. Test methods. Contrast measurement
BS EN ISO 7751:1997+A1:2011 Rubber and plastics hoses and hose assemblies. Ratios of proof and burst pressure to maximum working pressure
23/30474612 DC BS EN IEC 61810-7-46. Electrical relays. Tests and Measurements - Part 7-46. Impulse voltage test
20/30413819 DC BS EN IEC 63294. Test methods for electric cables with rated voltages up to and including 450/750 V
BS EN IEC 61169-1-4:2020 Radio-frequency connectors - Electrical test methods. Voltage standing wave ratio, return loss and reflection coefficient
21/30390465 DC BS EN IEC 61462. Composite hollow insulators. Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1 000 V. Definitions, test methods, acceptance criteria and design recommendations
BS EN 61587-5:2014 Mechanical structures for electronic equipment. Tests for IEC 60917 and IEC 60297. Seismic tests for chassis, subracks and plug-in units
BS EN 61000-4-11:2004 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
BS EN 60512-28-100:2013 Connectors for electronic equipment. Tests and measurements. Signal integrity tests up to 1000 MHz on IEC 60603-7 and IEC 61076-3 series connectors. Tests 28a to 28g
BS EN 50395:2005+A1:2011 Electrical test methods for low voltage energy cables
23/30470489 DC BS EN IEC 61810-7-4. Electrical relays. Tests and Measurements - Part 7-4. Dielectric strength test, impulse voltage test
BS EN 61000-4-14:1999 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Voltage fluctuation immunity test
BS EN 50483-5:2009 Test requirements for low voltage aerial bundled cable accessories — Part 5: Electrical ageing test
BS EN 60512-11-11:2002 Connectors for electronic equipment - Tests and measurements - Climatic tests - Test 11k - Low air pressure

CENELEC - European Committee for Electrotechnical Standardization, iec voltage ratio test

EN 60922:1997 Auxiliaries for Lamps - Ballasts for Discharge Lamps (Excluding Tubular Fluorescent Lamps) General and Safety Requirements
EN 61587-2:2001 Mechanical Structures for Electronic Equipment - Tests for IEC 60917 and IEC 60297 Part 2: Seismic Tests for Cabinets and Racks

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, iec voltage ratio test

GB/T 32216-2015 Hydraulic fluid power.Test method for the proportional/servo controlled hydraulic cylinder
GB/T 5441.6-1985 Test methods for communication cable--Crosstalk attenuation test--Comparison method
GB/T 3048.5-1994 Test methods for determining electrical properties of electric cables and wires.Determining insulation resistance.Comparison-galvanometer method
GB/T 14342-1993 Testing method for specific resistance of synthetic staple fibres
GB/T 14342-2015 Man-made fiber.Test method for specific resistance of staple fibers
GB/T 11311-1989 Test methods for the properties of piezoelectric ceramics test for poisson's Ratio σ**E
GB/T 3048.8-1994 Test methods for determining electrical properties of electric cables and wires.A.C. voltage tests
GB/T 6798-1996 Semiconductor integrated circuits. General principles of measuring methods of voltage comparators
GB/T 3048.6-1994 Test methods for determining electrical properties of electric cables and wires.Determining insulation resistance.Voltmeter-ammeter method
GB/T 5441.8-1985 Test methods for communication cable--Test for frequency characteristic of attenuation coefficient of coaxial pair--Comparison method
GB/T 3048.13-1992 Electric cables and wires--Method for impulse ovtage test
GB/T 3048.14-1992 Electric cables and wires--Method for D.C.voltage test
GB/T 3048.13-2007 Test methods for electrical properties of electric cables and wires.Part 13: Impulse voltage test
GB/T 3048.14-2007 Test methods for electrical properties of electric cables and wires.Part 14: DC voltage test
GB/T 3048.8-2007 Test methods for electrical properties of electric cables and wires.Part 8: AC voltage test
GB/T 9574-2001 Rubber and plastics hoses and hose assemblies--Ratios of proof and burst pressure to design working pressure
GB/T 17627.1-1998 High-voltage test techniques for low-voltage equipment. Part 1: Definitions, test and procedure requirements
GB/T 2423.21-1991 Basic environmental testing procedures for electric and electronic products--Test M:Low air pressure
GB/T 2423.21-2008 Environmental testing for electric and electronic products.Part 2 Test methods Test M:Low air pressure
GB/T 11606.2-1989 The method of environmental test for analytical instruments--Line frequency and voltage test
GB/T 17626.14-2005 Electromagnetic compatibility Testing and measurement techniques Voltage fluctuation immunity test
GB/T 17627.2-1998 High-voltage test techniques for low voltage equipment Part 2 Measuring system and test equipment
GB/T 17626.11-1999 Electromagnetic compatibility. Testing and measurement techniques. Voltage dips, short interruptions and voltage variations immunity tests
GB/T 17626.11-2008 Electromagnetic compatibility.Testing and measurement techniques.Voltage dips, short interruptions and voltage variations immunity tests
GB/T 3333-1999 Cable paper--Determination of electrical strength at powerfrequence
GB/T 7991.6-2014 Test method of viterous and porcelain enamels.Part 6:High voltage test
GB/T 16927.1-1997 High-voltage test techniques. Part 1: General test requirements
GB/T 2423.25-2008 Environmental testing for electric and electronic products.Part2:Tsets Tset Z/AM:Combined cold/low air pressure tests
GB/T 2423.26-2008 Environmental testing for electric and electronic products.Part 2 Test methods TestZ/BM:Combined dry heat/low air pressure tests
GB/T 2424.15-2008 Enviromental testing for electric and electronic products.Guide for combined temperature/low air pressure tests
GB/T 23253-2009 Hydraulic fluid powder.Electrically controlled hydraulic pumps.Test methods to determine performance characteristics
GB/T 6587.8-1986 Line frequency and voltage tests for electronic measuring instruments
GB/T 2423.25-1992 Basic environmental testing procedures for electric and electronic products--Test Z/AM: combined cold/low air pressure tests
GB/T 2423.26-1992 Basic environmental testing procedures for electric and electronic products--Test Z/BM: combined heat/low air pressure tests
GB/T 5132-1985 Test methods of laminated tubes used for electrical insulation
GB/T 5134-1985 Test methods of laminated rods used for electrical insulation

Association Francaise de Normalisation, iec voltage ratio test

NF E11-068:1992 Electronic compartors. Specifications. Test methods.
NF C93-400-25-7*NF EN 60512-25-7:2005 Connectors for electronic equipment - Tests and measurements - Part 25-7 : test 25g - Impedance, reflection coefficient and voltage standing wave ratio (VSWR).
NF L54-002-221*NF EN 2591-221:2008 Aerospace series - Elements of electrical and optical connection - Test methods - Part 221 : Voltage Standing Wave Ratio (VSWR)
NF P98-231-3:1992 TESTS RELATING TO PAVEMENTS. COMPACTION TESTS ON NON BITUMINOUS MATEIRALS. PART 3 : DETERMINATION OF THE MAXIMAL APPARENT REFERENCE SPECIFIC GRAVITY, AND COMPACTION DIFFICULTY INDEX, USING CONTROLLED VIBROCOMPRESSION TEST.
NF E11-062:1985 Electronic comparators. Linear dimensional sensors. Test methods.
NF C93-400-4-1*NF EN 60512-4-1:2003 Connectors for electronic equipment - Tests and measurements - Part 4-1 : voltage stress tests - Test 4a : voltage proof
NF EN ISO 7751:2017 Tuyaux et flexibles en caoutchouc et en plastique - Rapports des pressions d'épreuve et de rupture à la pression maximale de service
NF C93-400-25-1*NF EN 60512-25-1:2002 Connectors for electronic equipment - Tests and measurements - Part 25-1 : test 25a - Crosstalk ratio
NF E11-067:1992 Electronic comparators. Angular dimensional sensors. Specifications. Test methods.
NF EN 50395/A1:2012 Méthodes d'essais électriques pour les câbles d'énergie basse tension
NF EN 50395:2005 Méthodes d'essais électriques pour les câbles d'énergie basse tension
NF C93-400-4-3*NF EN 60512-4-3:2002 Connectors for electronic equipment - Tests and measurements - Part 4-3 : voltage stress tests - Test 4c : voltage proof of pre-insulated crimp barrels
NF C32-040*NF EN 50395:2005 Electrical test methods for low voltage energy cables.
NF C32-040/A1*NF EN 50395/A1:2012 Electrical test methods for low voltage energy cables
NF T47-251-1:1997 Rubber and plastics hoses and hose assemblies. Ratios of proof and burst pressure to design working pressure.
NF EN 50396:2005 Méthodes d'essais non électriques pour les câbles d'énergie basse tension
NF EN 50396/A1:2012 Méthodes d'essais non électriques pour les câbles d'énergie basse tension
NF E51-260/A1*NF ISO 1217/A1:2016 Displacement compressors - Acceptances tests - Amendment 1 : calculation of isentropic efficiency and relationship with specific energy
NF C93-471-3:2007 Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 3 : electromagnetic shielding performance tests for cabinets, racks and subracks.
NF C93-471-3*NF EN 61587-3:2013 Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 3: electromagnetic shielding performance tests for cabinets and subracks
NF C93-400-4-2*NF EN 60512-4-2:2002 Connectors for electronic equipment - Tests and measurements - Part 4-2 : voltage stress tests - Test 4b : partial discharge

工业和信息化部, iec voltage ratio test

SJ/T 10805-2018 Semiconductor integrated circuit voltage comparator test method
JB/T 501-2021 Power Transformer Test Guidelines

American Society for Testing and Materials (ASTM), iec voltage ratio test

ASTM C1183-04 Standard Test Method for Extrusion Rate of Elastomeric Sealants
ASTM C1183-04(2008) Standard Test Method for Extrusion Rate of Elastomeric Sealants
ASTM D1883-21 Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils
ASTM D5080-00 Standard Test Method for Rapid Determination of Percent Compaction
ASTM D5080-08 Standard Test Method for Rapid Determination of Percent Compaction
ASTM D1883-16 Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils
ASTM D1169-19 Standard Test Method for Specific Resistance (Resistivity) of Electrical Insulating Liquids
ASTM D1169-19a Standard Test Method for Specific Resistance (Resistivity) of Electrical Insulating Liquids
ASTM A593-72 Specification for Charpy V-nNtch Testing Requirements for Steel Plates for Pressure Vessel
ASTM D1883-05 Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils
ASTM D1883-99 Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils
ASTM D1883-07e1 Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils
ASTM F2231-02(2019) Standard Test Method for Charpy Impact Test on Thin Specimens of Polyethylene Used in Pressurized Pipes
ASTM E220-07 Standard Test Method for Calibration of Thermocouples By Comparison Techniques
ASTM E220-07e1 Standard Test Method for Calibration of Thermocouples By Comparison Techniques
ASTM E220-02 Standard Test Method for Calibration of Thermocouples By Comparison Techniques
ASTM D3448-85(2000) Standard Test Method for Specific Aqueous Conductance of Trichlorotrifluoroethane
ASTM E220-19 Standard Test Method for Calibration of Thermocouples By Comparison Techniques
ASTM E220-13 Standard Test Method for Calibration of Thermocouples By Comparison Techniques
ASTM D3448-10(2020) Standard Test Method for Specific Aqueous Conductance of Trichlorotrifluoroethane
ASTM E220-07a Standard Test Method for Calibration of Thermocouples By Comparison Techniques
ASTM D3638-07 Standard Test Method for Comparative Tracking Index of Electrical Insulating Materials
ASTM E1362-05 Standard Test Method for Calibration of Non-Concentrator Photovoltaic Secondary Reference Cells
ASTM E1362-15 Standard Test Methods for Calibration of Non-Concentrator Photovoltaic Non-Primary Reference Cells
ASTM D1883-14 Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils
ASTM D1883-07e2 Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils
ASTM C469/C469M-14e1 Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression
ASTM C469/C469M-22 Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression
ASTM D3638-93(1998) Standard Test Method for Comparative Tracking Index of Electrical Insulating Materials
ASTM D3638-21 Standard Test Method for Comparative Tracking Index of Electrical Insulating Materials
ASTM D3638-12 Standard Test Method for Comparative Tracking Index of Electrical Insulating Materials
ASTM D3638-21e1 Standard Test Method for Comparative Tracking Index of Electrical Insulating Materials
ASTM D1389-97a Standard Test Method for Proof-Voltage Testing of Thin Solid Electrical Insulating Materials
ASTM A833-17 Standard Test Method for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM D2726-11 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
ASTM A833-19 Standard Test Method for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM C469/C469M-14 Standard Test Method for Static Modulus of Elasticity and Poissonrsquo;s Ratio of Concrete in Compression
ASTM D2726/D2726M-13 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
ASTM D8199-19 Standard Test Method for Determining the Specific Strength of Hydraulically Applied Fiber Matrix Products for Erosion Control
ASTM D8199-20 Standard Test Method for Determining the Specific Strength of Hydraulically Applied Fiber Matrix Products for Erosion Control
ASTM D1657-22 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer
ASTM D1807-00(2005) Standard Test Methods for Refractive Index and Specific Optical Dispersion of Electrical Insulating Liquids
ASTM E948-05a Standard Test Method for Electrical Performance of Photovoltaic Cells Using Reference Cells Under Simulated Sunlight

American National Standards Institute （ANSI), iec voltage ratio test

ANSI/SCTE 120-2011 Test Method for Balance Ratio of 75-300 Ohm Matching Transformer
ANSI/EIA 364-106:2000 Standing Wave Ratio (SWR) Test Procedure for Electrical Connectors and Sockets
ANSI/ASTM D3638:2012 Test Method for Comparative Tracking Index of Electrical Insulating Materials
ANSI/EIA 364-20D:2008 Electric Connectors - Withstanding Voltage Test Procedure
ANSI/ASTM E1362:1999 Test Method for Calibration of Non-Concentrator Photovoltaic Secondary Reference Cells
ANSI/EIA 364-20B:1999 Electric Connectors - Withstanding Voltage Test Procedure
ANSI/EIA 364-39B:1999 Electric Connectors – Hydrostatic Test Procedure

European Association of Aerospace Industries, iec voltage ratio test

AECMA PREN 2591-221-2005 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part 221: Votage Standing Wave Ratio (VSWR) Edition P 1

国家市场监督管理总局、中国国家标准化管理委员会, iec voltage ratio test

GB/T 11313.201-2018 Radio-frequency connectors—Part 201:Electrical test methods—Reflection coefficient and voltage standing wave ratio
GB/T 5095.2507-2021 Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-7: Test 25g: Impedance, reflection coefficient, and voltage standing wave ratio (VSWR)
GB/T 17627-2019 High-voltage test techniques for low-voltage equipment—Definitions,test and procedure requirements,test equipment
GB/T 37399-2019 Test methods for high voltage shore connection system
GB/T 5095.2501-2021 Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-1: Test 25a: Crosstalk ratio
GB/T 7354-2018 High-voltage test techniques—Partial discharge measurements

Professional Standard - Machinery, iec voltage ratio test

JB/T 8537-1997 Laboratory test method of dust specific electric resistance
JB/T 8537-2010 Testing method for dust resistivity in lab
JB/T 8537-2023 Testing method for dust resistivity in laboratory
JB/T 7083-1993 Impulse voltage testing instruments for low voltage apparatus
JB/T 7083-2013 Impulse-voltage tester for low-voltage electrical installations
JB/T 501-2006 Test guide for power transformers
JB/T 5357-2002 Test guide for voltage transformers test
JB/T 501-1991 Guidelines for Testing Power Transformers
JB/T 8262.2-2013 Electrostatic dry toner.Part 2: Test method for charge-to-mass
JB/T 7082-1993 Dielectric withstand testing instruments for insulating medium
JB/T 7080-1993 Testing instrument for winding inter-turn impulse voltage

AENOR, iec voltage ratio test

UNE-EN 60512-25-7:2005 Connectors for electronic equipment - Tests and measurements -- Part 25-7: Test 25g - Impedance, reflection coefficient and voltage standing wave ratio (VSWR)
UNE-EN 60512-4-1:2004 Connectors for electronic equipment - Tests and measurements -- Part 4-1: Voltage stress tests - Test 4a: Voltage proof
UNE-EN 50395:2005 Electrical test methods for low voltage energy cables
UNE-EN 50395:2005/A1:2011 Electrical test methods for low voltage energy cables
UNE-EN ISO 17654:2012 Resistance welding - Destructive tests of welds - Pressure test of resistance seam welds (ISO 17654:2011)

International Electrotechnical Commission (IEC), iec voltage ratio test

IEC 60512-25-7:2004 Connectors for electronic equipment - Tests and measurements - Part 25-7: Test 25g: Impedance, reflection coefficient, and voltage standing wave ratio (VSWR)
IEC 60512-4-1:2003 Connectors for electronic equipment - Tests and measurements - Part 4-1: Voltage stress tests; Test 4a: Voltage proof
IEC 61169-1-4:2020 Radio-frequency connectors - Part 1-4: Electrical test methods - Voltage standing wave ratio, return loss and reflection coefficient
IEC 42/325/DTS:2013 IEC/TS 62478, Ed. 1: High voltage test techniques - Measurement of partial discharges by electromagnetic and acoustic methods
IEC 60512-25-1:2001 Connectors for electronic equipment - Tests and measurements - Part 25-1: Test 25a; Crosstalk ratio
IEC 60512-4-3:2002 Connectors for electronic equipment - Tests and measurements - Part 4-3: Voltage stress tests; Test 4c: Voltage proof of pre-insulated crimp barrels
IEC TR2 61356:1995 Functional evaluation of electrical insulation systems - Principles for test procedures when comparative testing is not feasible
IEC TR 61356:1995 Functional evaluation of electrical insulation systems - Principles for test procedures when comparative testing is not feasible
IEC 61587-2:2000 Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 2: Seismic tests for cabinets and racks
IEC 82/820/CD:2013 IEC/TS 62910: Test procedure of Low Voltage Ride-Through (LVRT) measurement for utility-interconnected photovoltaic inverter
IEC 60270:2000 High-voltage test techniques - Partial discharge measurements
IEC 60230:2018 Impulse tests on cables and their accessories
IEC 60230:1966 Impulse tests on cables and their accessories
IEC 60270:2015 High-voltage test techniques - Partial discharge measurements
IEC TS 61587-3:1999 Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 3: Electromagnetic shielding performance tests for cabinets, racks and subracks
IEC 61587-3:2006 Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 3: Electromagnetic shielding performance tests for cabinets, racks and subracks
IEC 61587-3:2013 Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 3: Electromagnetic shielding performance tests for cabinets and subracks
IEC 62501:2009+AMD1:2014+AMD2:2017 CSV Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission - Electrical testing
IEC 61000-4-11:2001 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measuring techniques; Voltage dips, short interruptions and voltage variations immunity tests
IEC 61587-1:2022 Mechanical structures for electrical and electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 1: Environmental requirements, test setups and safety aspects

European Committee for Standardization (CEN), iec voltage ratio test

EN 60922:1991/prAA:1991 IEC 922 Amendment; ballasts for discharge lamps; clause 11: high voltage impulse test
EN 3475-812:2009 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 812: Return loss (VSWR)
EN 2591-221:2007 Aerospace series - Elements of electrical and optical connection - Test methods - Part 221: Voltage Standing Wave Ratio (VSWR)
HD 588.1 S1-1991 High-voltage test techniques; part 1: general definitions and test requirements (IEC 60-1:1989 + corrigendum March 1990)
EN ISO 7751:2016 Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to maximum working pressure (ISO 7751:2016)
EN ISO 7751:1997 Rubber and Plastics Hoses and Hose Assemblies - Ratios of Proof and Burst Pressure to Design Working Pressure ISO 7751: 1991

Professional Standard - Electricity, iec voltage ratio test

DL/T 1287-2013 Determination of electrical resistivity of coal ash in laboratory
DL/T 474.1-2006 Guide for insulation test on site Insulation resistance、dielectric absorption ratio and polarization index test
DL/T 474.1-2018 Insulation Resistance, Absorption Ratio and Polarization Index Tests
DL 474.1-1992 Insulation Resistance, Absorption Ratio and Polarization Index Tests
DL/T 2007-2019 Integrated wiring test method for electrical test of power transformer
DL 420-1991 Method of test for refractive index and specific dispersion of electrically insulating liquid
DL/T 474.2-2006 Guide for insulation test on site DC high voltage test
DL/T 474.2-2018 Guide for insulation test on site DC high voltage test
DL 474.2-1992 Implementation guidelines for on-site insulation test DC high voltage test

ET-QSAE, iec voltage ratio test

ES 491-2000

Military Standard of the People's Republic of China-General Armament Department, iec voltage ratio test

GJB 17.2-1984 Test methods for aviation wires and cables Voltage test
GJB 17.4-1984 Test methods for aviation wires and cables Pulse voltage test
GJB 17.3-1984 Test methods for aviation wires and cables High temperature voltage test
GJB 360.5-1987 Test methods for electronic and electrical components Low pressure test
GJB 737.9-1993 Test method for pyrotechnics agent Gas specific volume determination Pressure sensor method
GJB 8684.5-2015 Pyrotechnic powder performance test methods Part 5: Pressure sensor method for specific volume determination
GJB 811.3-1990 Test method for operating performance of brushes for aircraft motors - low air pressure test
GJB 360.35-1987 Test methods for electronic and electrical components Resistance voltage coefficient test

PL-PKN, iec voltage ratio test

PN-EN IEC 61169-1-4-2021-04 E Radio-frequency connectors -- Part 1-4: Electrical test methods -- Voltage standing wave ratio, return loss and reflection coefficient (IEC 61169-1-4:2020)
PN-EN IEC 61007-2021-04 E Transformers and inductors for use in electronic and telecommunication equipment -- Measuring methods and test procedures (IEC 61007:2020)
PN-EN IEC 61007-2021-04/AC-2021-08 E Transformers and inductors for use in electronic and telecommunication equipment -- Measuring methods and test procedures (IEC 61007:2020/COR1:2021)
PN E04160-72-1992 Electric cables Test methods Yoltage test techniques
PN E04070-13-1986 Power transformers Test methods Lightning impulse test
PN E04063-08-1987 On-load tap changers Test methods Short-circuit current test
PN E04070-11-1986 Power transformers Test methods Test of temperature rise
PN E06074-1974 Extra-low vol?age sa?ety rectificer uni?s Generals requirements and tests
PN C82055-11-1989 Test methods of pressed carbon products Determination of thermal specific conductivity with comparative method

AT-OVE/ON, iec voltage ratio test

OVE EN IEC 61169-1-4:2021 Radio-frequency connectors - Part 1-4: Electrical test methods - Voltage standing wave ratio, return loss and reflection coefficient (( IEC 61169-1-4:2020) EN IEC 61169-1-4:2020) (german version)

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., iec voltage ratio test

ASHRAE 3907-1995 Screening Lubricants for Refrigerant Compressors: A Comparison Between a Pin and Block Tester and the High-Pressure Tribometer

Electronic Components, Assemblies and Materials Association, iec voltage ratio test

ECA EIA-364-106-2000 TP-106 Standing Wave Ratio (SWR) Test Procedure for Electrical Connectors

International Organization for Standardization (ISO), iec voltage ratio test

ISO 6469-3:2018 Electrically propelled road vehicles - Safety specifications - Part 3: Electrical safety
ISO 6469-3:2018/Amd 1:2020 Electrically propelled road vehicles — Safety specifications — Part 3: Electrical safety — Amendment 1: Withstand voltage test for electric power sources
ISO 7751:1983 Rubber and plastics hoses and hose assemblies — Ratios of proof and burst pressure to design working pressure
ISO 7751:1991 Rubber and plastics hoses and hose assemblies; ratios of proof and burst pressure to design working pressure
ISO 7751:2016 Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to maximum working pressure
ISO 2746:2015 Vitreous and porcelain enamels - High voltage test
ISO 17654:2011 Resistance welding - Destructive tests of welds - Pressure test of resistance seam welds

Professional Standard - Automobile, iec voltage ratio test

QC/T 593-2014 Performance requirements and bench test methods of automobile hydraulic proportional valve

Group Standards of the People's Republic of China, iec voltage ratio test

T/CSTM 00189-2021 Refractory materials — Determination of poisson ratio at room temperature — Static compressive method
T/CSAA 10-2021 Specification for aerodynamic test of high pressure compressors for commercial high bypass ratio turbofan Aero-engines
T/CEC 5072-2022 High-pressure pressurized water test procedure for pumped-storage power station
T/GVS 005-2022 Testing specification for contrast method of absolute pressure capacitance diaphragm vacuum gauge in the semiconductor equipment
T/CSAA 11-2021 Specification of instrumentation selection and arrangement of aerodynamic test for high pressure compressors of commercial high bypass ratio turbofan Aero-engines

Professional Standard - Aerospace, iec voltage ratio test

QJ 1323.5-1987 Electromagnetic relay test method low pressure test
QJ 1323.19-1987 Electromagnetic relay test method Dielectric withstand voltage test
QJ 1238.17-1987 AC voltage test of cable test method on missile launch vehicle
QJ 1323.25-1987 Electromagnetic relay test method action and release voltage test

机械电子工业部, iec voltage ratio test

JB 5854-1991 Voltage relay test procedures and test methods

Professional Standard - Ferrous Metallurgy, iec voltage ratio test

YB/T 173-2000 Testing method for cold specific resistivity of carbon-containing refractory products

International Telecommunication Union (ITU), iec voltage ratio test

ITU-T V.56 FRENCH-1988 COMPARATIVE TESTS OF MODEMS FOR USE OVER TELEPHONE-TYPE CIRCUITS
ITU-T V.56 SPANISH-1988 COMPARATIVE TESTS OF MODEMS FOR USE OVER TELEPHONE-TYPE CIRCUITS

RU-GOST R, iec voltage ratio test

GOST 27851-1988 Hydraulic drive volumetric pumps. Accelerated comparative life tests
GOST 2933-1983 Low-voltage electrical apparatus. Methods of tests
GOST R IEC 61587-2-2015 Mechanical structures for electronic equipment. Tests for IEC 60917 and IEC 60297. Part 2. Seismic tests for cabinets
GOST 3484.2-1988 Power transformers. Heating tests
GOST 2990-1978 Cables, wires and cords. Methods of voltage test
GOST R IEC 61587-3-2013 Mechanical structures for electronic equipment. Tests for IEC 60917 and IEC 60297. Part 3. Electromagnetic shielding performance tests for cabinets, racks and subracks
GOST 21815.5-1986 Image intensifier and image converter tubes. Check of the testing voltage
GOST R 55191-2012 High voltage test techniques. Partial discharge measurements

Professional Standard - Electron, iec voltage ratio test

SJ/T 10805-2000 Semiconductor integrated circuits.General principles of measuring methods for voltage comparators
SJ/T 10805-1996 Semiconductor integrated circuits used as interface circuits--General principles of measuring methods of voltage comparators

CZ-CSN, iec voltage ratio test

CSN 34 5640-1973 Fundamental voltage test techniques
CSN 35 1083-1985 Power transformers. Short-circuit tests of transformers
CSN 34 5688-1980 Electrical and electronical equipment.Resistance test against environmental effects.Humid heat test-constant.
CSN IEC 995:1993 Determination of the prototype performance from model acceptance tests of hydraulic machines with consideration of scale effects
CSN 34 7010 Cast.38-1972 Breakdown voltage test of enamelled round wire
CSN 34 7010 Cast.37-1972 Breakdown voltage test of enamelled round wire
CSN 35 1088-1984 Power transformers. Methods for insulation electrical strength tests under alternating voltage
CSN 35 4055 Cast.9-1987 Electromechanical components for electronic equipment. Voltage stress tests
CSN 35 1082-1986 Power transformers. Methods of tempe-rature—rise tests

(U.S.) Ford Automotive Standards, iec voltage ratio test

FORD FLTM BB 101-12-2000 TEST OF AUTOMOTIVE ELECTRICAL CABLE FOR DURATION VOLTAGE AND BREAKDOWN VOLTAGE

IT-UNI, iec voltage ratio test

UNI 4370-1959

Association of German Mechanical Engineers, iec voltage ratio test

DVS 2916-2-2009
VDI 2045 Blatt 1-1993 Acceptance and performance tests on turbo compressors and displacement compressors; test procedure and comparison with guaranteed values

IN-BIS, iec voltage ratio test

IS 10810 Pt.45-1984

国家能源局, iec voltage ratio test

NB/T 42102-2016 Technical operating rules for high-voltage testing of high-voltage electrical appliances
NB/T 42154-2018 Test Guidelines for High Voltage/Low Voltage Prefabricated Substations

Institute of Electrical and Electronics Engineers (IEEE), iec voltage ratio test

IEEE Std C57.12.90-1993 Test code for liquid-immersed distribution, power, and regulating transformers and guide for short-circuit testing of distribution and power transformers
IEEE Std C57.12.90-1999 Test code for liquid-immersed distribution, power, and regulating transformers
IEEE Std C57.12.90-2006 Test code for liquid-immersed distribution, power, and regulating transformers
IEEE Std C57.12.90-2015 Test Code for Liquid-Immersed Distribution@ Power@ and Regulating Transformers

RO-ASRO, iec voltage ratio test

STAS SR ISO 7751:1995 Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to design working pressure

Professional Standard - Railway, iec voltage ratio test

TB/T 2516-1995 Test method for overvoltage of electric locomotive

Aerospace, Security and Defence Industries Association of Europe (ASD), iec voltage ratio test

ASD-STAN PREN 2591-221-2005 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part 221: Votage Standing Wave Ratio (VSWR) (Edition P 1)
ASD-STAN PREN 3475-812-2008 Aerospace series Cables, electrical, aircraft use Test methods Part 812: Return loss (VSWR) (Edition P 1)

未注明发布机构, iec voltage ratio test

GJB 5232.4-2004 Tactical missile warhead range test method Part 4: static explosion test shock wave overpressure and specific impulse test

Danish Standards Foundation, iec voltage ratio test

DS/EN ISO 17654:2011 Resistance welding - Destructive tests of welds - Pressure test of resistance seam welds
DS/EN 50395/A1:2011 Electrical test methods for low voltage energy cables
DS/EN 50395:2006 Electrical test methods for low voltage energy cables
DS/IEC 68-2-1:1991 Environmental testing. Part 2: Tests. Test A: Cold

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, iec voltage ratio test

GB/T 33348-2016 Voltage sourced converter valves for high-voltage direct current power transmission—Electrical testing

ES-AENOR, iec voltage ratio test

UNE 21-175 Pt.1-1992 Electrical test methods for electric cables. Part 1: Electrical tests for cables, cords and wires, for votages up to and including 450/750 V

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, iec voltage ratio test

GJB 5384.5-2005 Test methods of performance for pyrotechnic composition Part 5: Determination of specific volume. Pressure sensor method

Professional Standard - Agriculture, iec voltage ratio test

GB 998-1982 Basic test methods for low-voltage electrical appliances

Canadian Standards Association (CSA), iec voltage ratio test

CSA IEC 61000-4-11-05-CAN/CSA:2005 Electromagnetic Compatibility (EMC) - Part 4-11: Testing and measurement techniques . Voltage dips, short interruptions and voltage variations immunity tests Second Edition; IEC 61000-4-11:2004

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., iec voltage ratio test

IEEE C57.12.37-2015 The Electronic Reporting of Distribution Transformer Test Data
IEEE C57.12.37-2006 The Electronic Reporting of Distribution Transformer Test Data

ES-UNE, iec voltage ratio test

UNE-EN 60454-2:2007 Pressure-sensitive adhesive tapes for electrical purposes -- Part 2: Methods of test (IEC 60454-2:2007). (Endorsed by AENOR in February of 2008.)

HU-MSZT, iec voltage ratio test

MSZ 1580/3-1981