ZH
RU
ES

Gas particle size detection

Gas particle size detection, Total:500 items.

In the international standard classification, Gas particle size detection involves: Miscellaneous domestic and commercial equipment, Refractories, Cutting tools, Shipbuilding and marine structures in general, Analytical chemistry, Vocabularies, Air quality, Fuels, Earthworks. Excavations. Foundation construction. Underground works, Products of the chemical industry, Compressors and pneumatic machines, Pesticides and other agrochemicals, Particle size analysis. Sieving, Protective equipment, Geology. Meteorology. Hydrology, Semiconducting materials, Fluid power systems, Raw materials for rubber and plastics, Construction materials, Road engineering, Gas and steam turbines. Steam engines, Semiconductor devices, Materials for aerospace construction, Environmental protection, Internal combustion engines, Cereals, pulses and derived products, Power stations in general, Ceramics, Soil quality. Pedology, Nuclear energy engineering, Small craft, Wastes, Valves, TESTING, Testing of metals, Special purpose vehicles, Hydraulic fluids, Corrosion of metals, Conducting materials, Optoelectronics. Laser equipment, Medical equipment, Metrology and measurement in general, Water quality, Alarm and warning systems, Electricity. Magnetism. Electrical and magnetic measurements, Measurement of volume, mass, density, viscosity, Microbiology.

CZ-CSN, Gas particle size detection

CSN ISO 8840:1992 Rfractory materials. Determination of bulk density of granular materials (grain density)
CSN 72 1011-1980 Laboratory determination of apparent density of solid particles of soils

Group Standards of the People's Republic of China, Gas particle size detection

T/SAEPI 003-2019 Commercial Indoor Particles Concentration Detection System
T/WJZZ 009-2021 Whole measurement calibration method of particle number concentration measuring instrument
T/XZFW 004-2023 Determination of low-concentration particulate matter in exhaust gas from stationary pollution sources β-ray method
T/CEC 217-2019 Method for determination of particle content in sulfur hexafluoride gas - Light scattering method
T/XZFW 006-2023 Digital processor for monitoring results of low-concentration particulate matter in exhaust gas from fixed pollution sources
T/XZFW 010-2023 Stationary source emission —data processor for monitoring of particulate matter at low concentration
T/BSPT 003-2020 Powder Technology—Performance test method for fine particulate matter （PM2.5）mass concentration measurement instruments based on light scattering principle
T/SPMA T/SPMA002-2023 Testing method for the soothing function of cosmetics in vitro mast cell based assay of degranulation Inhibition and histamine release
T/QGCML 935-2023 Portable High Sensitivity Multi-parameter Gas Detector

BR-ABNT, Gas particle size detection

RO-ASRO, Gas particle size detection

STAS 10813-1976 Air purity DETERMINATION OF PARTICULATE MATTER
STAS 10195-1975 Purity of air DETERMINATION OF SETTLEARLE PARTICULATES

International Organization for Standardization (ISO), Gas particle size detection

ISO 8840:1987 Refractory materials; Determination of bulk density of granular materials (grain density)
ISO 8840:2021 Refractory materials - Determination of bulk density of granular materials (grain density)
ISO 18846:2016 Solid biofuels - Determination of fines content in samples of pellets
ISO 9277:2010 Determination of the specific surface area of solids by gas adsorption - BET method
ISO 18847:2016 Solid biofuels - Determination of particle density of pellets and briquettes
ISO 8573-4:2001 Compressed air - Part 4: Test methods for solid particle content
ISO 8573-4:2019 Compressed air — Contaminant measurement — Part 4: Particle content
ISO 14966:2002 Ambient air - Determination of numerical concentration of inorganic fibrous particles - Scanning electron microscopy method
ISO 8573-8:2004 Compressed air - Part 8: Test methods for solid particle content by mass concentration
ISO 16002:2004 Stored cereal grains and pulses - Guidance on the detection of infestation by live invertebrates by trapping
ISO 20290-1:2021 Aggregates for concrete - Test methods for mechanical and physical properties - Part 1: Determination of bulk density, particle density, particle mass-per-volume and water absorption
ISO 17892-3:2015 Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density
ISO 18854:2015 Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions
ISO 6783:1982 Coarse aggregates for concrete; Determination of particle density and water absorption; Hydrostatic balance method
ISO 12799:2015 Nuclear energy - Determination of nitrogen content in UO2, (U,Gd)O2 and (U,Pu)O2 sintered pellets - Inert gas extraction and conductivity detection method
ISO/TS 17892-3:2004/Cor 1:2006 Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density - Pycnometer method
ISO 8178-2:2021 Reciprocating internal combustion engines — Exhaust emission measurement — Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
ISO 8178-2:1996 Reciprocating internal combustion engines - Exhaust emission measurement - Part 2: Measurement of gaseous and particulate exhaust emissions at site
ISO 8178-1:2020 Reciprocating internal combustion engines — Exhaust emission measurement — Part 1: Test-bed measurement systems of gaseous and particulate emissions
ISO 4407:2002 Hydraulic fluid power - Fluid contamination - Determination of particulate contamination by the counting method using an optical microscope
ISO 14966:2019 Ambient air — Determination of numerical concentration of inorganic fibrous particles — Scanning electron microscopy method
ISO 13982-2:2004 Protective clothing for use against solid particulates - Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits
ISO/TS 17892-3:2004 Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density - Pycnometer method
ISO 8178-2:2008 Reciprocating internal combustion engines - Exhaust emission measurement - Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
ISO 8178-1:1996 Reciprocating internal combustion engines - Exhaust emission measurement - Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
ISO 9096:1992 Stationary source emissions; determination of concentration and mass flow rate of particulate material in gas-carrying ducts; manual gravimetric method
ISO/DIS 7054:2023 Corrosion of metals and alloys - The wiping method for measurements of gases and particles on real structures and equipment
ISO/TS 20593:2017 Ambient air - Determination of the mass concentration of tire and road wear particles (TRWP) - Pyrolysis-GC-MS method
ISO 14644-12:2018 Cleanrooms and associated controlled environments - Part 12: Specifications for monitoring air cleanliness by nanoscale particle concentration
ISO 15651:2015 "Nuclear energy - Determination of total hydrogen content in PuO2 and UO2 powders and UO2, (U,Gd)O2 and (U,Pu)O2 sintered pellets - Inert gas extraction and conductivity detection method"
ISO 14966:2002/cor 1:2007 Ambient air - Determination of numerical concentration of inorganic fibrous particles - Scanning electron microscopy method; Technical Corrigendum 1
ISO/DIS 18562-2 Biocompatibility evaluation of breathing gas pathways in healthcare applications — Part 2: Tests for emissions of particulate matter
ISO/TS 19590:2017 Nanotechnologies — Size distribution and concentration of inorganic nanoparticles in aqueous media via single particle inductively coupled plasma mass spectrometry

British Standards Institution (BSI), Gas particle size detection

BS ISO 9136-1:2005 Abrasive grains - Determination of bulk density - Macrogrits
BS PD CEN/TS 16976:2016 Ambient air. Determination of the particle number concentration of atmospheric aerosol
BS DD CEN/TS 15150:2005 Solid biofuels — Methods for the determination of particle density
BS DD CEN/TS 15150:2006 Solid biofuels. Methods for the determination of particle density
BS EN 15415-3:2012 Solid recovered fuels. Determination of particle size distribution. Method by image analysis for large dimension particles
BS EN 15415-1:2011 Solid recovered fuels. Determination of particle size distribution. Screen method for small dimension particles
BS EN ISO 13982-2:2004 Protective clothing for use against solid particulates - Test method of determination of inward leakage of aerosols of fine particles into suits
BS DD CEN/TS 15405:2010 Solid recovered fuels. Determination of density of pellets and briquettes
BS EN ISO 18846:2016 Solid biofuels. Determination of fines content in quantities of pellets
BS ISO 9277:2010 Determination of the specific surface area of solids by gas adsorption. BET method
BS ISO 8573-8:2004 Compressed air - Test methods for solid particle content by mass concentration
BS ISO 15900:2020 Determination of particle size distribution. Differential electrical mobility analysis for aerosol particles
BS EN ISO 18847:2016 Solid biofuels. Determination of particle density of pellets and briquettes
BS DD CEN/TS 15405:2006 Solid recovered fuels. Methods for the determination of density of pellets and briquettes
DD CEN/TS 15405:2006 Solid recovered fuels — Methods for the determination of density of pellets and briquettes
BS EN 16450:2017 Tracked Changes. Ambient air. Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5)
19/30370177 DC BS ISO 15900. Determination of particle size distribution. Differential electrical mobility analysis for aerosol particles
BS EN 15415-2:2012 Solid recovered fuels. Determination of particle size distribution. Maximum projected length method (manual) for large dimension particles
BS ISO 21018-1:2008 Hydraulic fluid power - Monitoring the level of particulate contamination of the fluid - General principles
BS ISO 8178-2:2009 Reciprocating internal combustion engines. Exhaust emission measurement. Measurement of gaseous and particulate exhaust emissions under field conditions
BS ISO 8178-2:2008 Reciprocating internal combustion engines - Exhaust emission measurement - Measurement of gaseous and particulate exhaust emissions under field conditions
BS ISO 14966:2002 Ambient air - Determination of numerical concentration of inorganic fibrous particles - Scanning electron microscopy method
BS ISO 16002:2004 Stored cereal grains and pulses - Guidance on the detection of infestation by live invertebrates by trapping
BS ISO 8178-1:2006 Reciprocating internal combustion engines - Exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions
BS ISO 20290-1:2021 Aggregates for concrete. Test methods for mechanical and physical properties - Determination of bulk density, particle density, particle mass-per-volume and water absorption
BS EN ISO 18854:2015 Small craft. Reciprocating internal combustion engines exhaust emission measurement. Test-bed measurement of gaseous and particulate exhaust emissions
BS ISO 8178-1:2020 Reciprocating internal combustion engines. Exhaust emission measurement - Test-bed measurement systems of gaseous and particulate emissions
BS EN ISO 13982-2:2005 Protective clothing for use against solid particulates - Test method of determination of inward leakage of aerosols of fine particles into suits
23/30464630 DC BS EN ISO 18847. Solid biofuels. Determination of particle density of pellets and briquettes
19/30373025 DC BS ISO 20290-1. Aggregates for concrete. Test methods for mechanical and physical properties. Part 1. Determination of bulk density, particle density, particle mass-per-volume and water absorption
BS EN 12341:2014 Ambient air. Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
PD CEN ISO/TS 19590:2019 Nanotechnologies. Size distribution and concentration of inorganic nanoparticles in aqueous media via single particle inductively coupled plasma mass spectrometry
BS ISO 21018-4:2019 Tracked Changes. Hydraulic fluid power. Monitoring the level of particulate contamination in the fluid. Use of the light extinction technique
BS ISO 8178-2:2021 Tracked Changes. Reciprocating internal combustion engines. Exhaust emission measurement. Measurement of gaseous and particulate exhaust emissions under field conditions
BS ISO 14966:2019 Ambient air. Determination of numerical concentration of inorganic fibrous particles. Scanning electron microscopy method
BS ISO 14644-12:2018 Cleanrooms and associated controlled environments - Specifications for monitoring air cleanliness by nanoscale particle concentration
PD ISO/TS 20593:2017 Ambient air. Determination of the mass concentration of tire and road wear particles (TRWP). Pyrolysis-GC-MS method
21/30426008 DC BS ISO 8178-2. Reciprocating internal combustion engines. Exhaust emission measurement. Part 2. Measurement of gaseous and particulate exhaust emissions under field conditions
22/30443631 DC BS EN 12341. Ambient air. Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
BS EN 993-18:2002 Methods of test for dense shaped refractory products - Determination of bulk density of granular materials by the water method with vacuum
BS ISO 30011:2010 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry
18/30375050 DC BS ISO 14966. Ambient air. Determination of numerical concentration of inorganic fibrous particles. Scanning electron microscopy method
BS EN ISO 18562-2:2020 Biocompatibility evaluation of breathing gas pathways in healthcare applications. Tests for emissions of particulate matter
21/30419440 DC BS ISO 21501-4 AMD1. Determination of particle size distribution. Single particle light interaction methods. Part 4. Light scattering airborne particle counter for clean spaces
19/30387314 DC BS ISO 8178-1 AMD1. Reciprocating internal combustion engines. Exhaust emission measurement. Part 1. Test-bed measurement systems of gaseous and particulate emissions
BS EN 993-17:1999 Methods of test for dense shaped refractory products - Determination of bulk density of granular materials by the mercury method with vacuum
BS EN 12341:1999 Air quality - Determination of the PM10 fraction of suspended particulate matter - Reference method and field test procedure to demonstrate reference equivalence of measurement methods
BS ISO 15202-1:2012 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Sampling
23/30439806 DC BS ISO 7054. Corrosion of metals and alloys. The wiping method for measurements of gases and particles on real structures and equipment
BS ISO 16183:2002 Heavy duty engines. Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
16/30348371 DC BS ISO 14644-12. Cleanrooms and associated controlled environments. Part 12. Specifications for monitoring air cleanliness by nanoscale particle concentration

European Committee for Standardization (CEN), Gas particle size detection

prEN ISO 18847 rev Solid biofuels — Determination of particle density of pellets and briquettes
EN ISO 18847:2016 Solid biofuels - Determination of particle density of pellets and briquettes
EN 15150:2011 Solid biofuels - Determination of particle density
CEN/TS 15405:2010 Solid recovered fuels - Determination of density of pellets and briquettes
EN 15415-2:2012 Solid recovered fuels - Determination of particle size distribution - Part 2: Maximum projected length method (manual) for large dimension particles
EN ISO 17829:2015 Solid biofuels - Determination of length and diameter of pellets (ISO 17829:2015)
PD CEN/TS 16450:2013 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5)
EN 993-18:2002 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum
EN 1097-3:1998 Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids
EN 15415-3:2012 Solid recovered fuels - Determination of particle size distribution - Part 3: Method by image analysis for large dimension particles
EN ISO 18854:2015 Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions (ISO 18854:2015)
FprEN 12341 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
EN 12341:2023 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
CEN/TR 16013-3:2012 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 3: Evaluation of airborne particle concentrations using photometers
CEN/TR 16013-2:2010 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters
EN 405:2001 Respiratory protective devices - Valved filtering half masks to protect against gases or gases and particles - Requirements, testing, marking (Incorporates Amendment A1: 2009)
EN 993-17:1998 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vacuum
EN ISO 8178-1:1996 Reciprocating Internal Combustion Engines - Exhaust Emission Measurement - Part 1: Test-Bed Measurement of Gaseous and Particulate Exhaust Emissions ISO 8178-1: 1996

Association Francaise de Normalisation, Gas particle size detection

NF X34-112*NF EN ISO 18847:2016 Solid biofuels - Determination of particle density of pellets and briquettes
NF EN ISO 17830:2016 Biocombustibles solides - Détermination de la distribution granulométrique des granulés désintégrés
NF X43-276*NF EN 481:1993 Workplace atmospheres. Size fraction definitions for measurement of airborne particles.
NF P94-054:1991 Soils : investigation and testing. Determination of particle density. Pycnometer method.
NF EN ISO 17831-1:2016 Biocombustibles solides - Détermination de la résistance mécanique des granulés et des briquettes - Partie 1 : granulés
NF X34-111*NF EN ISO 17829:2016 Solid biofuels - Determination of length and diameter of pellets
NF EN ISO 17829:2016 Biocombustibles solides - Détermination de la longueur et du diamètre des granulés
NF EN 15415-2:2012 Combustibles solides de récupération - Détermination de la distribution granulométrique - Méthode (manuelle) de projection de la longueur maximale des particules de grande dimension
NF EN 60749-16:2003 Dispositifs à semiconducteurs - Méthodes d'essais mécaniques et climatiques - Partie 16 : détection de bruit d'impact de particules (PIND)
NF X11-682:1984
NF E48-652:1990 Hydraulic fluid power. Fluids. Determination of overall particulate contamination by the gravimetric method.
NF ISO 8573-8:2004 Air comprimé - Partie 8 : méthodes d'essai pour la détermination de la teneur en particules solides par concentration massique
NF T45-155:2005 Rubber compounding ingredients - Carbon black - Determination of individual pellet crushing strength.
NF EN ISO 18847:2016 Biocombustibles solides - Détermination de la masse volumique unitaire des granulés et des briquettes
NF EN ISO 13982-2:2005 Vêtements de protection à utiliser contre les particules solides - Partie 2 : méthode d'essai pour la détermination de la fuite vers l'intérieur d'aérosols de fines particules dans des combinaisons
NF EN 1827/IN1:2009 Appareils de protection respiratoire - Demi-masques sans soupape inspiratoire et avec filtres démontables, contre les gaz, contre les gaz et les particules, ou contre les particules uniquement - Exigences, essais, marquage
NF EN 1827+A1:2009 Appareils de protection respiratoire - Demi-masques sans soupape inspiratoire et avec filtres démontables, contre les gaz, contre les gaz et les particules, ou contre les particules uniquement - Exigences, essais, marquage
NF X43-003:1966 Atmospheric pollution. Method of weight determination of solid particles entrained by combustion gases.
NF EN 15415-1:2011 Combustibles solides de récupération - Détermination de la distribution granulométrique - Partie 1 : méthode de criblage pour des particules de petites dimensions
NF EN 15415-3:2012 Combustibles solides de récupération - Détermination de la distribution granulométrique - Partie 3 : méthode par analyse d'images des particules de grande dimension
NF X43-021*NF EN 16450:2017 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10;PM2,5)
XP CEN ISO/TS 19590:2019 Nanotechnologies - Distribution granulométrique et concentration de nanoparticules inorganiques en milieu aqueux par spectrométrie de masse à plasma induit en mode particule unique
NF EN ISO 18854:2015 Petits navires - Moteurs alternatifs à combustion interne mesurage des émissions de gaz d'échappement - Mesurage des émissions de gaz et de particules au banc
NF ISO 16740:2005 Air des lieux de travail - Détermination du chrome hexavalent dans les particules en suspension dans l'air - Méthode par chromatographie ionique et détection spectrophotométrique avec diphényl carbazide
NF EN 16450:2017 Air ambiant - Systèmes automatisés de mesurage de la concentration de matière particulaire (PM10;PM2,5)
XP CEN ISO/TS 21083-2:2019 Méthode d'essai pour mesurer l'efficacité des médias de filtration d'air par rapport aux nanomatériaux sphériques - Partie 2 : spectre granulométrique de 3 nm à 30 nm
NF ISO 8178-2:2022 Moteurs alternatifs à combustion interne - Mesurage des émissions de gaz d'échappement - Partie 2 : mesurage des émissions de gaz et de particules sur site
NF X34-214-3*NF EN 15415-3:2012 Solid recovered fuels - Determination of particle size distribution - Part 3 : method by image analysis for large dimension particles
NF E48-682:2000 Hydraulic fluid power - On-line liquid automatic particle-counting systems for liquid - Methods of calibration and validation.
NF ISO 9278:2009 Énergie nucléaire - Pastilles de dioxyde d'uranium - Détermination de la masse volumique et de la fraction volumique de pores ouverts et fermés
NF X34-214-2*NF EN 15415-2:2012 Solid recovered fuels - Determination of particle size distribution - Part 2 : maximum projected length method (manual) for large dimension particles.
NF E48-660:1991 Hydraulic fluid systems. Fluids. Determination of solid particulate contamination by optical microscope and image analysis.
NF EN 13205-4:2014 Exposition sur les lieux de travail - Évaluation des performances des dispositifs de prélèvement pour le mesurage des concentrations de particules en suspension dans l'air - Partie 4 : essai de performances en laboratoire par comparaison des concen...
NF X43-049*NF EN 12341:2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
NF X11-683:1981
NF E37-211-2:1996 Reciprocating internal combustion engines. Exhaust emission measurement. Part 2 : measurement of gaseous and particulate exhaust emissions at site.
NF EN 405/IN1:2009 Appareils de protection respiratoire - Demi-masques filtrants à soupapes contre les gaz ou contre les gaz et les particules - Exigences, essais, marquage
NF EN 405+A1:2009 Appareils de protection respiratoire - Demi-masques filtrants à soupapes contre les gaz ou contre les gaz et les particules - Exigences, essais, marquage
NF E37-211-2*NF ISO 8178-2:2022 Reciprocating internal combustion engines - Exhaust emission measurement - Part 2 : measurement of gaseous and particulate exhaust emissions under field conditions
NF E37-211-1:2006 Reciprocating internal combustion engines - Exhaust emission measurement - Part 1 : test-bed measurement of gaseous and particulate exhaust emissions.
NF E37-211-1:1997 Reciprocating internal combustion engines. Exhaust emission measurement. Part 1 : test-bed measurement of gaseous and particulate exhaust emissions.
NF ISO 8178-1:2020 Moteurs alternatifs à combustion interne - Mesurage des émissions de gaz d'échappement - Partie 1 : mesurage des émissions de gaz et de particules au banc d'essai
NF X43-133*NF EN ISO 28439:2011 Workplace atmospheres - Characterization of ultrafine aerosols/nanoaerosols - Determination of the size distribution and number concentration using differential mobility analysing systems.
NF S74-551-2*NF EN ISO 13982-2:2005 Protective clothing for use against solid particulates - Part 2 : test method of determination of inward leakage of aerosols of fine particles into suits
NF EN ISO 17892-3:2015 Reconnaissance et essais géotechniques - Essais de laboratoire sur les sols - Partie 3 : détermination de la masse volumique des particules solides
NF ISO 22253:2019 Cigarettes - Dosage de la nicotine dans la matière particulaire totale provenant du courant principal de fumée avec un régime de fumage intense - Méthode par chromatographie en phase gazeuse
NF P94-057:1992 Soils investingation and testing. Granulometric analysis. Hydrometer method.
NF E37-211-1*NF ISO 8178-1:2020 Reciprocating internal combustion engines - Exhaust emission measurement - Part 1 : test-bed measurement systems of gaseous and particulate emissions
NF E48-658:1990 Hydraulic fluid power. Fluids. Determination of particulate contamination by automatic counting using the light interruption principle.
XP ISO/TS 20593:2017 Air ambiant - Détermination de la concentration en masse de particules provenant de l'usure des pneumatiques et des chaussées (TRWP) - Méthode par pyrolyse-CG/SM
NF EN 12341:2014 Air ambiant - Méthode normalisée de mesurage gravimétrique pour la détermination de la concentration massique MP10 ou MP2,5 de matière particulaire en suspension
NF E51-308*NF ISO 8573-8:2004 Compressed air - Part 8 : test methods for solid particle content by mass concentration
NF E37-211-2:2008 Reciprocating internal combustion engines - Exhaust emission measurement - Part 2 : measurement of gaseous and particulate exhaust emissions under field conditions.
FD CEN/TR 16013-3:2012 Exposition au poste de travail - Guide d'utilisation des instruments à lecture directe pour la surveillance des aérosols - Partie 3 : évaluation des concentrations de particules en suspension dans l'air à l'aide de photomètres
FD X43-711-3*FD CEN/TR 16013-3:2012 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 3 : evaluation of airborne particle concentrations using photometers
NF ISO 30011:2010 Air des lieux de travail - Détermination des métaux et métalloïdes dans les particules en suspension dans l'air par spectrométrie de masse avec plasma à couplage inductif
FD X43-070-6:2019 Air quality - Practical guidance for estimating the uncertainty of measurement on polluant concentration in ambient air - Part 6 : estimation of the uncertainties on mass concentrations of particulate matters measured automatically
NF X43-017:1984 Air quality. Measurement of the concentration of solid particles in ambient air. Beta ray absorption method.
NF EN ISO 14644-2:2016 Salles propres et environnements maîtrisés apparentés - Partie 2 : surveillance du maintien des performances de la salle propre pour la propreté particulaire de l'air
NF S95-189-2*NF EN ISO 18562-2:2020 Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 2 : tests for emissions of particulate matter

Korean Agency for Technology and Standards (KATS), Gas particle size detection

KS M ISO 18847:2022 Solid biofuels — Determination of particle density of pellets and briquettes
KS M ISO 17829:2021 Solid Biofuels — Determination of length and diameter of pellets
KS M 1429-2004(2010) Determination of the specific surface area of media(pelletized) - Gas adsorption method
KS M 1429-2013 Determination of the specific surface area of media(pelletized) - Gas adsorption method
KS C IEC 60749-16-2006(2021) Semiconductor devices－Mechanical and climatic test methods－Part 16：Particle impact noise detection(PIND)
KS B ISO 8573-8-2005(2010) Compressed air－Part 8：Test methods for solid particle content by mass concentration
KS B ISO 8573-8:2005 Compressed air-Part 8:Test methods for solid particle content by mass concentration
KS B ISO 8573-8:2013 Compressed air－Part 8：Test methods for solid particle content by mass concentration
KS R ISO 8178-1:2007 Reciprocating internal combustion engines－Exhaust emission measurement－Part 1 : Test-bed measurement of gaseous and particulate exhaust emissions
KS R ISO 8178-1:2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
KS A ISO 9278-2014(2019) Nuclear energy — Uranium dioxide pellets — Determination of density and volume fraction of open and closed porosity
KS R ISO 8178-2:2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
KS I ISO 11338-1-2014(2019) Stationary source emissions — Determination of gas and particlephase polycyclic aromatic hydrocarbons — Part 1: Sampling
KS K ISO 13982-2:2007 Protective clothing for use against solid particulates－Part 2：Test method of determination of inward leakage of aerosols of fine particles into suits
KS I ISO 30011-2012(2017) Workplace air－Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry
KS K ISO 13982-2-2007(2017) Protective clothing for use against solid particulates－Part 2：Test method of determination of inward leakage of aerosols of fine particles into suits
KS I ISO 16740-2007(2017) Workplace air－Determination of hexavalent chromium in airborne particulate matter－Method by ion chromatography and spectrophotometric measurement using diphenyl carbazide
KS I ISO 14644-12:2020 Cleanrooms and associated controlled environments —Part 12: Specifications for monitoring air cleanliness by nanoscale particle concentration
KS B 6741-1995(2000) MEASURING METHODS FOR AIRBORN PARTICLES IN CLEAN ROOM AND EVALUATING METHODS FOR AIR CLEANLINESS OF CLEAN ROOM
KS M 9900-2007 Measuring methods for airborn particles in clean room and evaluating methods for air cleanliness of clean room
KS I ISO 30011:2012 Workplace air－Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry
KS L 1618-2-2008 Fine ceramics(advanced ceramics, advanced technical ceramics)-Test methods of properties of ceramic granules-Part 2:Bulk density

KR-KS, Gas particle size detection

KS M ISO 18847-2022 Solid biofuels — Determination of particle density of pellets and briquettes
KS M ISO 17829-2021 Solid Biofuels — Determination of length and diameter of pellets
KS K ISO 13982-2-2007(2022) Protective clothing for use against solid particulates－Part 2：Test method of determination of inward leakage of aerosols of fine particles into suits
KS R ISO 8178-1-2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
KS R ISO 8178-2-2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
KS I ISO 30011-2022 Workplace air Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry
KS I ISO 14644-12-2020 Cleanrooms and associated controlled environments —Part 12: Specifications for monitoring air cleanliness by nanoscale particle concentration
KS I ISO 16740-2022 Workplace air Determination of hexavalent chromium in airborne particulate matter Method by ion chromatography and spectrophotometric measurement using diphenyl carbazide

German Institute for Standardization, Gas particle size detection

DIN EN ISO 18847:2016-12 Solid biofuels - Determination of particle density of pellets and briquettes (ISO 18847:2016); German version EN ISO 18847:2016
DIN EN ISO 18847:2023-07 Solid biofuels - Determination of particle density of pellets and briquettes (ISO/DIS 18847:2023); German and English version prEN ISO 18847:2023 / Note: Date of issue 2023-05-26*Intended as replacement for DIN EN ISO 18847 (2016-12).
DIN EN 16450:2017-07 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5); German version EN 16450:2017
DIN EN ISO 17829:2016-03 Solid biofuels - Determination of length and diameter of pellets (ISO 17829:2015); German version EN ISO 17829:2015
DIN CEN/TS 15405:2010-11*DIN SPEC 1152:2010-11 Solid recovered fuels - Determination of density of pellets and briquettes; German version CEN/TS 15405:2010
DIN 50452-2:1991 Testing of materials for semiconductor technology; test method for particle analysis in liquids; determination of particles with optical particle counters
DIN EN 13205:2002 Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations; German version EN 13205:2001
DIN EN 15150:2012 Solid biofuels - Determination of particle density; German version EN 15150:2011
DIN EN ISO 17829:2016 Solid biofuels - Determination of length and diameter of pellets (ISO 17829:2015)
DIN 18124:2019-02 Soil, investigation and testing - Determination of density of solid particles - Wide mouth pycnometer
DIN EN 1827:2009-11 Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only - Requirements, testing, marking; German version EN 1827:1999+A1:2009
DIN 54408:2007 Testing of ion exchangers - Determination of bulk weight density, equilibrium moisture content and solids
DIN 54408:1998 Testing of ion exchangers - Determination of bulk weight density, equilibrium moisture content and solids
DIN EN 15415-1:2011-11 Solid recovered fuels - Determination of particle size distribution - Part 1: Screen method for small dimension particles; German version EN 15415-1:2011
DIN 25495:1991 Determination of density and total porosity of uranium dioxide pellets by the mercury displacement method
DIN 33899-2:2014 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters
DIN 66135-3:2001 Particle characterization - Micropore analysis by gas adsorption - Part 3: Determination of the micropore volume according to Dubini and Radushkevich
DIN EN ISO 13982-2:2005-03 Protective clothing for use against solid particulates - Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits (ISO 13982-2:2004); German version EN ISO 13982-2:2004
DIN EN 15415-2:2012-06 Solid recovered fuels - Determination of particle size distribution - Part 2: Maximum projected length method (manual) for large dimension particles; German version EN 15415-2:2012
DIN EN 15415-3:2012-06 Solid recovered fuels - Determination of particle size distribution - Part 3: Method by image analysis for large dimension particles; German version EN 15415-3:2012
DIN EN ISO 18854:2015-08 Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions (ISO 18854:2015); German version EN ISO 18854:2015
DIN 66135-3:2001-06 Particle characterization - Micropore analysis by gas adsorption - Part 3: Determination of the micropore volume according to Dubini and Radushkevich
DIN 50601:1985 Metallographic examination; determination of the ferritic or austenitic grain size of steel and ferrous materials
DIN EN ISO 18854:2015 Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions (ISO 18854:2015)
DIN CEN ISO/TS 19590:2019-11*DIN SPEC 19286:2019-11 Nanotechnologies - Size distribution and concentration of inorganic nanoparticles in aqueous media via single particle inductively coupled plasma mass spectrometry (ISO/TS 19590:2017); German version CEN ISO/TS 19590:2019
DIN 18124:2011 Soil, investigation and testing - Determination of density of solid particles - Capillary pyknometer, wide mouth pycnometer, gas pycnometer
DIN EN ISO 13982-2:2005 Protective clothing for use against solid particulates - Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits (ISO 13982-2:2004); German version EN ISO 13982-2:2004
DIN EN 405:2009-08 Respiratory protective devices - Valved filtering half masks to protect against gases or gases and particles - Requirements, testing, marking; German version EN 405:2001+A1:2009
DIN EN 15415-1:2011 Solid recovered fuels - Determination of particle size distribution - Part 1: Screen method for small dimension particles; German version EN 15415-1:2011
DIN 66135-1:2001-06 Particle characterization - Micropore analysis by gas adsorption - Part 1: Fundamentals and testing procedure
DIN EN 1097-3:1998 Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids; German version EN 1097-3:1998
DIN EN 15415-2:2012 Solid recovered fuels - Determination of particle size distribution - Part 2: Maximum projected length method (manual) for large dimension particles; German version EN 15415-2:2012
DIN EN ISO 18847:2016 Solid biofuels - Determination of particle density of pellets and briquettes (ISO 18847:2016); German version EN ISO 18847:2016
DIN EN 15415-3:2012 Solid recovered fuels - Determination of particle size distribution - Part 3: Method by image analysis for large dimension particles; German version EN 15415-3:2012
DIN 33899-3:2014-09 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 3: Evaluation of airborne particle concentrations using photometers
DIN EN 12341:2022 Ambient air - Standard gravimetric measurement method for the determination of the PM or PM mass concentration of suspended particulate matter; German and English version prEN 12341:2022
DIN 33899-2:2014-02 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters
DIN 51870:1981 Testing of gaseaus fuels and other gases; determination of relative density according to the balance method and calculation of density
DIN SPEC 19429:2018-03 Protective clothing against gases and particles made of permeable to air materials - Classification from test results, marking and manufacturer information
DIN EN 993-18:2002 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum; German version EN 993-18:2002
DIN EN 13205-1:2014-09 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 1: General requirements; German version EN 13205-1:2014
DIN EN 12341:2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter; German version EN 12341:2014
DIN EN 13205-6:2014-09 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 6: Transport and handling tests; German version EN 13205-6:2014
DIN CEN/TS 17307:2019-07*DIN SPEC 3759:2019-07 Material derived from End-of-Life tyres - Granulates and powders - Elastomers identification: Gas-chromatography and mass-spectrometric detection of pyrolysis products in solution: German version CEN/TS 17307:2019

ES-UNE, Gas particle size detection

ISO/DIS 18847:2023 Solid biofuels — Determination of particle density of pellets and briquettes
UNE-CEN/TS 16976:2016 Ambient air - Determination of the particle number concentration of atmospheric aerosol (Endorsed by Asociación Española de Normalización in January of 2021.)
UNE-EN ISO 17829:2016 Solid biofuels - Determination of length and diameter of pellets (ISO 17829:2015)
UNE-EN ISO 18854:2015 Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions (ISO 18854:2015)
UNE-CEN/TS 17307:2020 EX Material derived from End-of-Life tyres - Granulates and powders - Elastomers identification: Gas-chromatography and mass-spectrometric detection of pyrolysis products in solution
UNE-EN 61788-9:2005 Superconductivity -- Part 9: Measurements for bulk high temperature superconductors - Trapped flux density of large grain oxide superconductors (Endorsed by AENOR in November of 2005.)

AENOR, Gas particle size detection

UNE 56919:1990 GRANULATED CORK. BULK DENSITY TEST.
UNE-EN ISO 18847:2017 Solid biofuels - Determination of particle density of pellets and briquettes (ISO 18847:2016)
UNE-EN 16450:2017 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5)
UNE-EN 15415-1:2012 Solid recovered fuels - Determination of particle size distribution - Part 1: Screen method for small dimension particles
UNE-EN 1827:1999+A1:2010 Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only - Requirements, testing, marking
UNE-EN 15415-2:2012 Solid recovered fuels - Determination of particle size distribution - Part 2: Maximum projected length method (manual) for large dimension particles
UNE-EN 15415-3:2012 Solid recovered fuels - Determination of particle size distribution - Part 3: Method by image analysis for large dimension particles
UNE-EN ISO 13982-2:2005 Protective clothing for use against solid particulates - Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits (ISO 13982-2:2004)
UNE-EN 12341:2015 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
UNE-EN 405:2002+A1:2010 Respiratory protective devices - Valved filtering half masks to protect against gases or gases and particles - Requirements, testing, marking
UNE-ISO 11338-1:2006 Stationary source emissions -- Determination of gas and particle-phase polycyclic aromatic hydrocarbons -- Part 1: Sampling. (ISO 11338-1:2003)
UNE-EN 464:1995 Protective clothing - Protection against liquid and gaseous chemicals, including aerosols and solid particles - Test method: Determination of leak-tightness of gas-tight suits (Internal pressure test)

Professional Standard-Ships, Gas particle size detection

CB/T 3997-2008 Determination method of contaminating level by particles for marine fluid

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Gas particle size detection

GB/T 26570.1-2011 Determination of particle in gases.Light-scattering method.Part 1:Determination of particle in pipeline gases
GB/T 13277.8-2023 Compressed air part 8: Methods of measurement of mass concentration of solid particles
GB/T 29024.3-2012 Determination of particle size distribution.Single particle light interaction methods.Part 3:Light extinction liquid-borne particle counter
GB/T 29024.2-2016 Determination of particle size distribution.Single particle light interaction methods.Part 2:Light scattering liquid-borne particle counter
GB/T 13277.4-2015 Compressed air.Part 4:Test methods for solid particle content
GB/T 27613-2011 Hydraulic fluid power - Fluid contamination.Determination of particulate contamination by the gravimetric method
GB/T 42732-2023 Size Distribution and Concentration Measurement of Inorganic Nanoparticles in Aqueous Phases in Nanotechnology by Single Particle Inductively Coupled Plasma Mass Spectrometry
GB/T 8190.2-2011 Reciprocating internal combustion engines.Exhaust emission measurement.Part 2: Measurement of gaseous and particulate exhaust emissions at site
GB/T 8190.2-1999 Reciprocating internal combustion engines Exhaust emission measurement--Part 2: Measurement of gaseous and particulate exhaust emissions at site
GB/T 37162.4-2023 Monitoring of Particle Pollution Degree of Hydraulic Transmission Fluids Part 4: Application of Shading Technology
GB/T 20082-2006 Hydraulic fluid power-Fluid contamination-Determination of particulate contamination by the counting method using an optical microscope
GB/T 8190.1-1999 Reciprocating internal combustion engines--Exhaust emission measurement--Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
GB/T 8190.1-2010 Reciprocating internal combustion engines.Exhaust emission measurement.Part 1:Test-bed measurement of gaseous and particulate exhaust emissions
GB/T 8190.1-2023 Emission measurement of reciprocating internal combustion engines - Part 1: Test bench measurement systems for gaseous and particulate emissions

Association of German Mechanical Engineers, Gas particle size detection

VDI 3491 Blatt 1-1980 Particulate matter measurement; characteristics of suspended particulate matter in gases; terms and definitions
VDI 3867 Blatt 4-2011 Measurement of particles in ambient air - Determination of the particle number concentration and particle size distribution of aerosols - Optical aerosol spectrometer
VDI 3867 Blatt 5-2013 Measurement of particles in ambient air - Determination of the particle number concentration and particle size distribution of aerosols - Time-of-flight spectrometer
VDI 3867 Blatt 2-2008 Measurement of particulate matter in ambient air - Methods for characterizing test aerosols - Determination of the particle number concentration and particle size distribution - Condensation Particle Counter (CPC)
VDI 3867 Blatt 3-2012 Measurement of particles in ambient air - Determination of the particle number concentration and number size distribution of aerosols - Electrical mobility spectrometer
VDI 2463 Blatt 1-1999 Particulate matter measurement - Gravimetric determination of mass concentration of suspended particulate matter in ambient air - General principles
VDI 3867 Blatt 1-2009 Measurement of particulate matter in ambient air - Determination of the particle number concentration and number size distribution of aerosols - Fundamentals
VDI 3786 Blatt 10-1994 Environmental meteorology; measurement of the atmospheric turbidity due to aerosol particles with sunphotometers
VDI 3867 Blatt 6-2012 Measurement of particles in ambient air - Determination of the particle number concentration and number size distribution of aerosols - Electrical Low Pressure Impactor (ELPI)
VDI 3491 Blatt 2-2017 Measurement of particles - Methods for generating test aerosols - Dispersing liquids
VDI 2066 Blatt 5-1994 Particulate matter measurement - Dust measurement in flowing gases; particle size selective measurement by impaction method - Cascade impactor
VDI 2066 Blatt 8-1995 Measurement of particles - Dust measurement in flowing gases - Measurement of smoke number in furnaces designed for EL-type fuel oil
VDI 2066 Blatt 1-2006 Particulate matter measurement - Dust measurement in flowing gases - Gravimetric determination of dust load
VDI 3491 Blatt 15-1996 Particulate matter measurement - Generation of test aerosols - Dilution systems with continuous volumetric flow
VDI 2463 Blatt 11-1996 Particulate matter measurement - Measurement of mass concentration in ambient air - Filter method; Digitel DHA-80 filter changer
VDI 2463 Blatt 7-1982 Particulate matter measurement; measurement of mass concentration in ambient air; filter method; small filter device GS 050
VDI 2463 Blatt 8-1982 Particulate matter measurement; measurement of mass concentration in ambient air; standard method for the comparsion of nonfractionating methods
VDI 2066 Blatt 10-2004 Particulate matter measurement - Dust measurement in flowing gases - Measurement of PM10 and PM2,5 emissions at stationary sources by impaction method
VDI 3861 Blatt 1-1989 Measurement of fibrous particles; manual measurement of asbestos in flowing clean exhaust gas; determination of asbestos mass concentration by IR-spectroscopy

American Society of Mechanical Engineers (ASME), Gas particle size detection

ASME PTC 38-1980 Determining the Concentration of Particulate Matter in a Gas Stream

YU-JUS, Gas particle size detection

JUS H.P5.011-1991 Testing of pesticides.Dusts,granules,microgranules and water-dispersible powder.Determination of bulk density

RU-GOST R, Gas particle size detection

GOST ISO 8840-2014 Refractory materials. Determination of bulk density of granular materials (grain density)
GOST 33507-2015 Solid biofuel. Determination of particle density
GOST R 55124-2012 Solid biofuels. Determination of particle density
GOST R 55550-2013 Solid biofuels. Determination of particle size distribution of disintegrated pellets
GOST R 55566-2013 Solid recovered fuels. Determination of particle size distribution. Part 1. Screen method for small dimension particles
GOST 33399-2015 Testing of chemicals of environmental hazard. Determination of the particle size distribution/determination of the fibre length and diameter distribution. Method A: Particle size distribution (effective hydrodynamic radius). Method B: Fibre length and dia
GOST 31247-2004 Industrial cleanliness. Determination of fluid sample contamination using automatic particle counter
GOST R 55552-2013 Solid recovered fuels. Determination of particle size distribution. Part 3. Method by image analysis for large dimension particles
GOST R 55549-2013 Solid recovered fuels. Determination of particle size distribution. Part 2. Maximum projected length method (manual) for large dimension particles
GOST ISO 8178-2-2013 Reciprocating internal combustion engines. Exhaust emission measurement. Part 2. Measurement of gaseous and particulate exhaust emissions under field conditions
GOST ISO 8178-1-2013 Reciprocating internal combustion engines. Exhaust emission measurement. Part 1. Test-bed measurement of gaseous and particulate exhaust emissions
GOST R ISO 30011-2017 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry
GOST R ISO 12884-2007 Ambient air. Determination of total (gas and particle phase) polycyclic aromatic hydrocarbons. Collection on sorbent-backed filters with gas chromatographic/mass spectrometric analyses
GOST R 8.791-2013 State system for ensuring the uniformity of measurements. Radioisotope and piezobalance analyzers for mass concentration of aerosol particles in air of the working zone. The method of verification
GOST R 8.775-2011 State system for ensuring the uniformity of measurements. Disperse composition of gas atmospheres. Determination of nano particle size by differential electrical mobility analysis for aerosol particles
GOST 13005-1967 Interferometers for determination of liqnid and gas concentration. Methods and means for verification
GOST R 8.755-2011 State system for ensuring the uniformity of measurements. Dispersion content of gas atmospheres. Determination of nanoparticle size by diffusion spectral analysis

National Metrological Verification Regulations of the People's Republic of China, Gas particle size detection

JJG(机械) 7-1990 Verification rules for single particle compressive strength tester

Lithuanian Standards Office , Gas particle size detection

LST EN 16126-2012 Solid biofuels - Determination of particle size distribution of disintegrated pellets
LST EN 15150-2012 Solid biofuels - Determination of particle density
LST CEN/TS 15405-2010 Solid recovered fuels - Determination of density of pellets and briquettes
LST EN 16127-2012 Solid biofuels - Determination of length and diameter of pellets
LST 1360.7-1995 Soils for road construction. Testing methods. Determination density of solid particles
LST EN 15415-1-2011 Solid recovered fuels - Determination of particle size distribution - Part 1: Screen method for small dimension particles
LST EN 1827-2001+A1-2009 Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only - Requirements, testing, marking
LST EN 15415-2-2012 Solid recovered fuels - Determination of particle size distribution - Part 2: Maximum projected length method (manual) for large dimension particles
LST EN 15415-3-2012 Solid recovered fuels - Determination of particle size distribution - Part 3: Method by image analysis for large dimension particles
LST EN ISO 13982-2:2005 Protective clothing for use against solid particulates - Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits (ISO 13982-2:2004)
LST EN 12341-2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
LST EN 405-2002+A1-2009 Respiratory protective devices - Valved filtering half masks to protect against gases or gases and particles - Requirements, testing, marking
LST EN 464-1999 Protective clothing - Protection against liquid and gaseous chemicals, including aerosols and solid particles - Test method: Determination of leak-tightness of gas-tight suits (Internal pressure test)
LST ISO 11338-1:2008 Stationary source emissions - Determination of gas and particle-phase polycyclic aromatic hydrocarbons - Part 1: Sampling (ISO 11338-1:2003, identical)
LST EN 61788-9-2005 Superconductivity. Part 9: Measurements for bulk high temperature superconductors. Trapped flux density of large grain oxide superconductors (IEC 61788-9:2005)

Danish Standards Foundation, Gas particle size detection

DS/EN 16126:2012 Solid biofuels - Determination of particle size distribution of disintegrated pellets
DS/EN 15150:2012 Solid biofuels - Determination of particle density
DS/CEN/TS 15405:2010 Solid recovered fuels - Determination of density of pellets and briquettes
DS/EN 16127:2012 Solid biofuels - Determination of length and diameter of pellets
DS/CEN/TS 16450:2013 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5)
DS/EN 15415-1:2011 Solid recovered fuels - Determination of particle size distribution - Part 1: Screen method for small dimension particles
DS/EN 1827+A1:2009 Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only - Requirements, testing, marking
DS/EN 15415-2:2012 Solid recovered fuels - Determination of particle size distribution - Part 2: Maximum projected length method (manual) for large dimension particles
DS/EN 15415-3:2012 Solid recovered fuels - Determination of particle size distribution - Part 3: Method by image analysis for large dimension particles
DS/ISO 11338-1:2004 Stationary source emissions - Determination of gas and particle-phase polycyclic aromatic hydrocarbons - Part 1: Sampling
DS/EN 405+A1:2009 Respiratory protective devices - Valved filtering half masks to protect against gases or gases and particles - Requirements, testing, marking
DS/ISO 11338-2:2004 Stationary source emissions - Determination of gas and particle-phase polycyclic aromatic hydrocarbons - Part 2: Sample preparation, clean-up and determination
DS/EN 61788-9:2005 Superconductivity - Part 9: Measurements for bulk high temperature superconductors - Trapped flux density of large grain oxide superconductors
DS/EN 464:1995 Protective clothing - Protection against liquid and gaseous chemicals, including aerosols and solid particles - Test method: Determination of leak-tightness of gas-tight suits (Internal pressure test)
DS/CEN/TR 16013-3:2012 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 3: Evaluation of airborne particle concentrations using photometers

Professional Standard - Machinery, Gas particle size detection

JB/T 9395.5-1999 Measuring method for scatter graininess of optical crystal
JB/T 9495.5-1999 Measuring method for scatter graininess of optical crystal
JB/T 9591.3-2015 Gas turbine.Cleanliness verifing for oil system.Measuring particulate contaminant in oil by microscopic counting method
JB/T 9591.3-1999 Cleanliness test for oil system of gas turbine measuring solid particle contaminant in oil liquid by microscopic counting method

Institute of Environmental Sciences and Technology, Gas particle size detection

IEST G-CC1002-1999 Determination of the Concentration of Airborne Ultrafine Particles

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Gas particle size detection

GB/T 13531.6-2018 General methods on determination of cosmetics—Determination of partical size

American Society for Testing and Materials (ASTM), Gas particle size detection

ASTM E727/E727M-08(2013)e1 Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
ASTM E727-91(1998) Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
ASTM E727-02 Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
ASTM E727/E727M-08(2020) Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
ASTM D4781-03(2018)e1 Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles
ASTM F327-08(2022) Standard Practice for Sampling Gas Blow Down Systems and Components for Particulate Contamination by Automatic Particle Monitor Method
ASTM F1394-92(1999) Standard Test Method for Determination of Particle Contribution from Gas Distribution System Valves
ASTM F1394-92(2020) Standard Test Method for Determination of Particle Contribution from Gas Distribution System Valves
ASTM F50-21 Standard Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles
ASTM F327-78(1996) Standard Practice for Sampling Gas Blow Down Systems and Components for Particulate Contamination by Automatic Particle Monitor Method
ASTM D4096-17 Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High–Volume Sampler Method)
ASTM D4096-17(2017) Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High–Volume Sampler Method)
ASTM D8049-17 Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Particle Analyzer
ASTM D4179-11(2017) Standard Test Method for Single Pellet Crush Strength of Formed Catalysts and Catalyst Carriers
ASTM D4699-03(2018)e1 Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles
ASTM D4699-03(2018) Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles
ASTM D8049-16 Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Particle Analyzer
ASTM D7439-08 Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasmax2013;Mass Spectrometry
ASTM D8489-23 Test Method for Determination of Microplastics Particle and Fiber Size, Distribution, Shape, and Concentration in Waters with High to Low Suspended Solids Using a Dynamic Image Particle Size and Shape
ASTM D7439-21 Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasma–Mass Spectrometry
ASTM D4490-96 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Detector Tubes
ASTM D7439-14 Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasmandash;Mass Spectrometry
ASTM D8489-23e1 Standard Test Method for Determination of Microplastics Particle and Fiber Size, Distribution, Shape, and Concentration in Waters with High to Low Suspended Solids Using a Dynamic Image Particle Size
ASTM D4490-23 Red Standard Practice for the Use of Detector Tubes in the Measurement of Toxic Gases and Vapors (Standard + Redline PDF Bundle)
ASTM D4490-96(2001)e1 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Detector Tubes
ASTM D4490-23 Standard Practice for the Use of Detector Tubes in the Measurement of Toxic Gases and Vapors
ASTM D4490-96(2016) Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Detector Tubes
ASTM D4490-96(2011) Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Detector Tubes
ASTM D3267-20 Standard Test Method for Separation and Collection of Particulate and Water-Soluble Gaseous Fluorides in the Atmosphere (Filter and Impinger Method)
ASTM D3267-12 Standard Test Method for Separation and Collection of Particulate and Water-Soluble Gaseous Fluorides in the Atmosphere (Filter and Impinger Method)
ASTM D6831-02 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
ASTM D6831-11 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance

Professional Standard - Petrochemical Industry, Gas particle size detection

SH/T 0093-1991 Jet Fuel Solid Particulate Contamination Method

CEN - European Committee for Standardization, Gas particle size detection

PD CEN/TS 15150:2005 Solid biofuels - Methods for the determination of particle density
PD CEN/TS 15405:2006 Solid recovered fuels - Methods for the determination of density of pellets and briquettes
EN 16450:2017 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2@5)
EN ISO 12799:2019 Nuclear energy - Determination of nitrogen content in UO2@ (U@Gd)O2 and (U@Pu)O2 sintered pellets - Inert gas extraction and conductivity detection method
EN ISO 8178-2:1996 Reciprocating Internal Combustion Engines - Exhaust Emission Measurement - Part 2: Measurement of Gaseous and Particulate Exhaust Emissions at Site
PREN 13205-2010 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations
PD CEN/TS 17307:2019 Material derived from End-of-Life tyres - Granulates and powders - Elastomers identification: Gaschromatography and mass-spectrometric detection of pyrolysis products in solution
EN ISO 15651:2017 Nuclear energy - Determination of total hydrogen content in PuO2 and UO2 powders and UO2@ (U@Gd)O2 and (U@Pu)O2 sintered pellets - Inert gas extraction and conductivity detection method

Military Standard of the People's Republic of China-General Armament Department, Gas particle size detection

GJB 380.4-1987 Aircraft hydraulic system contamination test uses automatic particle counter to determine oil solid particle contamination degree
GJB 380.4A-2015 Aviation Service Fluid Contamination Testing Part 4: Determination of Solid Particle Contamination by Automatic Particle Counting Method
GJB 380.5-1987 Aircraft hydraulic system contamination test using microscope counting method to determine oil solid particle contamination degree
GJB 380.5A-2015 Aviation working fluid contamination test Part 5: Determination of solid particle contamination by microscopic counting method
GJB 380.8A-2015 Aviation working fluid contamination test Part 8: Determination of solid particle contamination by microscopic contrast method

HU-MSZT, Gas particle size detection

Taiwan Provincial Standard of the People's Republic of China, Gas particle size detection

CNS 15091-7-2007 Method of test for deep sea water - Determination of total suspended matters
CNS 14820-2004 Method of test for measuring toxic gases generated by solid material flammability － Gas detector tube

GOSTR, Gas particle size detection

GOST 34089-2017 Solid biofuel. Determination of length and diameter of pellets

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Gas particle size detection

GJB 380.4A-2004 Contamination test method of operating liquid for aviation Part 4:Determination of solid particle contamination level by automatic particle counting method
GJB 380.5A-2004 Contamination test method of operating liquid for aviation Part 5:Determination of solid particle contamination level by counting method using a microscope
GJB 380.8A-2004 Contamination test method of operating fluid for aviation Part 8:Determination of solid particle contamination level by compare method using a microscope

Professional Standard - Aviation, Gas particle size detection

HB 5931.4-1986 Determination of Solid Particle Contamination Degree of Working Fluid Using Automatic Particle Counter for Contamination Test of Aircraft Hydraulic System
HB 5931.5-1986 Determination of solid particle pollution degree of working fluid by microscopic counting method for pollution test of aircraft hydraulic system

国家市场监督管理总局、中国国家标准化管理委员会, Gas particle size detection

GB/T 39193-2020 Ambient air—Determination of particulate matter mass concentration—Gravimetric method
GB/T 37162.1-2018 Hydraulic fluid power—Monitoring the level of particulate contamination of the fluid—Part 1: General principles
GB/T 38340-2019 Small craft—Reciprocating internal combustion engines exhaust emission measurement—Test-bed measurement of gaseous and particulate exhaust emissions
GB/T 37162.3-2021 Hydraulic fluid power—Monitoring the level of particulate contamination of the fluid—Part 3:Use of the filter blockage technique
GB/T 40566-2021 Granular polysilicon produced by fluidized bed method—Determination of hydrogen—Pulse heating inert gas fusion infrared absorption method
GB/T 37406-2019 Detection method of degree of sphericity of spherical silica for electronic packaging—Particle dynamic photoelectric projection method

Occupational Health Standard of the People's Republic of China, Gas particle size detection

GBZ/T 192.6-2018 Determination of dust in the air of workplaces - Part 6: Ultrafine particles and total fine particle concentration

Canadian Standards Association (CSA), Gas particle size detection

CSA ISO 18847:2021 Solid biofuels - Determination of particle density of pellets and briquettes (Adopted ISO 18847:2016, first edition, 2016-09-01)

PH-BPS, Gas particle size detection

PNS ISO 9136-1:2021 Abrasive grains - Determination of bulk density - Part 1: Macrogrits
PNS ISO 14644-12:2021 Cleanrooms and associated controlled environments - Part 12: Specifications for monitoring air cleanliness by nanoscale particle concentration

NO-SN, Gas particle size detection

NS 8012-1982 Geotechnical testing - Laboratory methods - Density of solid particles

North Atlantic Treaty Organization Standards Agency, Gas particle size detection

STANAG 3713-2008 DETERMINATION OF PARTICULATE MATTER IN AEROSPACE HYDRAULIC FLUIDS USING A PARTICLE SIZE ANALYSER

Japanese Industrial Standards Committee (JISC), Gas particle size detection

JIS B 8392-8:2008 Compressed air -- Part 8: Test methods for solid particle content by mass concentration
JIS Z 8813:1994 Measuring methods for suspended particulate matter concentration in air-general requirements
JIS R 1619:1995 Testing method for size distribution of fine ceramic particles by liquid photosedimentation method
JIS B 9930:2000 Hydraulic fluid power -- Fluid contamination -- Determination of particulate contamination by the counting method using a microscope
JIS T 8124-2:2008 Protective clothing for use against solid particulates -- Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits
JIS K 0804:1992 Gas detector tubes (Length-of-stain type)
JIS B 9930:2006 Hydraulic fluid power -- Fluid contamination -- Determination of particulate contamination by the counting method using an optical microscope
JIS B 8008-1:2023 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 1: Test-bed measurement systems of gaseous and particulate emissions
JIS B 8008-2:2009 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
JIS K 0804:1998 Gas detector tube measurement system (Length-of-stain type)
JIS K 0804:2014 Gas detector tube measurement system (Length-of-stain type)
JIS Z 7151:2000 Stationary source emissions -- Determination of concentration and mass flow rate of particulate material in gas-carrying ducts -- Manual gravimetric method

Professional Standard - Electron, Gas particle size detection

SJ 2798-1987 Method for determination of particles in electronic grade gases--Light scattering method

Anhui Provincial Standard of the People's Republic of China, Gas particle size detection

DB34/T 392-2004 Test method for laser determination of inhalable particulate matter in indoor air

U.S. Military Regulations and Norms, Gas particle size detection

ARMY MIL-T-51461 VALID NOTICE 2-2004 TESTER, AIRFLOW-GAS PARTICULATE FILTER UNIT, M39
ARMY MIL-T-51461 NOTICE 1-1995 TESTER, AIRFLOW-GAS PARTICULATE FILTER UNIT, M39
ARMY MIL-T-51461 (1)-1987 TESTER, AIRFLOW-GAS PARTICULATE FILTER UNIT, M39
ARMY MIL-T-51461-1980 TESTER, AIRFLOW-GAS PARTICULATE FILTER UNIT, M39

Hebei Provincial Standard of the People's Republic of China, Gas particle size detection

DB13/T 2375-2016 Gravimetric method for determination of low-concentration particulate matter in exhaust gas from stationary pollution sources

Qinghai Provincial Standard of the People's Republic of China, Gas particle size detection

DB63/T 1873-2020 Determination of low-concentration particulate matter in exhaust gas from stationary pollution sources β-ray method

Liaoning Provincial Standard of the People's Republic of China, Gas particle size detection

DB21/T 3270-2020 Determination of low-concentration particulate matter in exhaust gas from stationary pollution sources β-ray method

Shandong Provincial Standard of the People's Republic of China, Gas particle size detection

DB37/T 3785-2019 Determination of low-concentration particulate matter in exhaust gas from stationary pollution sources β-ray method
DB37/T 2537-2014 Gravimetric method for determination of low-concentration particulate matter in exhaust gas from stationary pollution sources in Shandong Province
DB37/T 3461-2018 Determination of Copper and Zinc in Waste Gas Particulates from Stationary Pollution Sources in Shandong Province by Flame Atomic Absorption Spectrophotometry
DB37/T 3460-2018 Determination of Copper in Waste Gas Particulates from Stationary Pollution Sources in Shandong Province Graphite Furnace Atomic Absorption Spectrophotometry
DB37/T 3459-2018 Determination of Copper and Zinc in Waste Gas Particulates from Stationary Pollution Sources in Shandong Province by Inductively Coupled Plasma Mass Spectrometry

Jiangxi Provincial Standard of the People's Republic of China, Gas particle size detection

DB36/T 1386-2021 Determination of low-concentration particulate matter in exhaust gas from stationary pollution sources β-ray method

Inner Mongolia Provincial Standard of the People's Republic of China, Gas particle size detection

DB15/T 2362-2021 Determination of low-concentration particulate matter in exhaust gas from stationary pollution sources β-ray method

Jilin Provincial Standard of the People's Republic of China, Gas particle size detection

DB22/T 3426-2023 Determination of low-concentration particulate matter in exhaust gas from stationary pollution sources β-ray method

IN-BIS, Gas particle size detection

Professional Standard - Environmental Protection, Gas particle size detection

HJ 93-2013 Specifications and test procedures for PM<下标10> and PM<下标2.5> sampler
HJ 653-2013 Specifications and test procedures for ambient air quality continuous automated monitoring system for PM<下标10> and PM<下标2.5>
HJ 653-2021 Technical requirements and detection methods for continuous automatic monitoring system of ambient air particulate matter (PM10 and PM2.5)
HJ 76-2017 Technical requirements and detection methods of continuous monitoring system for flue gas (SO2, NOx, particulate matter) emissions from stationary pollution sources
HJ 657-2013 Ambient air and stationary source emission.Determination of metals in ambient particulate matter.Inductively coupled plasma/mass spectrometry (ICP-MS)
HJ 777-2015 Ambient air and waste gas from stationary sources emission -Determination of metal elements in ambient particle matter-Inductively coupled plasma optical emission spectrometry
HJ 93-2013(XG1-2018) Ambient air particulate matter (PM10 and PM2.5) sampler technical requirements and detection methods "No. 1 Amendment"
HJ 653-2013(XG1-2018) Ambient Air Particulate Matter (PM10 and PM2.5) Continuous Automatic Monitoring System Technical Requirements and Detection Methods "No. 1 Amendment"
HJ 657-2013(XG1-2018) Determination of lead and other metal elements in air and exhaust gas particulate matter Inductively coupled plasma mass spectrometry "No. 1 Amendment"

Professional Standard - Energy, Gas particle size detection

NB/SH/T 0868-2013 Determination of the level of cleanliness of aviation turbine fuel.Portable automatic particle counter method

Professional Standard - Agriculture, Gas particle size detection

农业部公告第1797号 New veterinary drugs: 1. Mycoplasma pneumoniae ELISA antibody detection kit; 2. Chaige Jieji Granules
农业部公告第1895号 New veterinary drugs: 1. Swine influenza virus (H1 subtype) ELISA antibody detection kit; 2. Banlangen granules
空气和废气监测分析方法 5.3.3-2003 Part Five Pollution Source Monitoring Chapter Three Determination of Particulate Matter and Metal Compounds Three Smoke Blackness

Standard Association of Australia （SAA）, Gas particle size detection

AS 1141.5:1996 Methods for sampling and testing aggregates Method 5: Particle density and water absorption of fine aggregate
AS 1141.6.1:1995 Methods for sampling and testing aggregates Method 6.1: Particle density and water absorption of coarse aggregate - Weighing - in-waer method
AS/NZS 3580.9.15:2014

PL-PKN, Gas particle size detection

PN Z04097 Arkusz 04-1974 Air purity protection Tests for size composition of dust Determination of weight particie size of dust with the aid of sedimentation pipette
PN Z04097 Arkusz 06-1974 Air purity protection Tests for size composition of dust Determination of particie size of dust with the aid of rotary separator
PN Z04102-06-1986 Air purity protection Tests for cadmium and its compounds Determination of cadmium and its compounds in suspended particles in the ambient air (imision) by atomie absorption spectrometry
PN Z04139-05-1986 Air purity protection Tests for lead and its compounds Determination of lead and its compounds in suspended particies in the ambient air (imision) by atomie absorption spectrometry
PN Z04002 Arkusz 04-1974 Air purity protection Tests of dust physical properties Determination of static surface and statical surface dimension and pores dimension of dust particles

TH-TISI, Gas particle size detection

TIS 1743-1999 Coarse aggregates for concrete.determination of particle density and water absorption.hydrostatic balance method

ZA-SANS, Gas particle size detection

SANS 50405:2003 Respiratory protective devices - Valved filtering half masks to protect against gases or gases and particles - Requirements, testing, marking

AT-ON, Gas particle size detection

ONORM EN 405-1993 Respiratory protective devices - Valved filtering half masks to protect against gases or gases and particles -Requirements, testing, marking

未注明发布机构, Gas particle size detection

DIN EN ISO 8178-1:1996 Reciprocating internal combustion engines, Exhaust emission measurement — Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
BS EN 12341:2023 Ambient air — Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
BS ISO 16183:2002(2003) Heavy duty engines — Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions

Hubei Provincial Standard of the People's Republic of China, Gas particle size detection

DB42/T 1904-2022 Portable β-ray method for the determination of low-concentration particulate matter in exhaust gas from stationary pollution sources

NZ-SNZ, Gas particle size detection

AS/NZS 4886:2007 Domestic solid fuel burning appliance- Pellet heaters-Determination of flue gas emission

SE-SIS, Gas particle size detection

SIS SS 02 84 26-1991 Air quality — Stationary source emissions — Determination of concentration and mass flow rate of particulate material in gas-carrying ducts — Manual gravimetric metod

Professional Standard - Civil Aviation, Gas particle size detection

MH/T 6068-2017 Standard test method for free water, particulate and other contamination in aviation fuels.Field inspection procedures

IT-UNI, Gas particle size detection

UNI 3245-1972
UNI ISO 11338-1:2021 Stationary source emissions - Determination of gas and particle-phase polycyclic aromatic hydrocarbons - Part 1: Sampling
UNI 7411-1975
UNI ISO 11338-2:2021 Stationary source emissions - Determination of gas and particle-phase polycyclic aromatic hydrocarbons - Part 2: Sample preparation, clean-up and determination

Professional Standard - Automobile, Gas particle size detection

QC/T 29105.3-2013 Sampling methods of testing particulate contamination of hydraulic oil of special purpose vehicle hydraulic system
QC/T 29105.4-1992 Test method for solid pollution degree of hydraulic oil in hydraulic system of special purpose vehicles Microscopic particle counting method

VN-TCVN, Gas particle size detection

TCVN 6852-2-2010 Reciprocating internal combustion engines.Exhaust emission measurement.Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
TCVN 6852-1-2008 Reciprocating internal combustion engines.Exhaust emission measurement.Part 1: Test-bed measurement of gaseous and particulate exhaust emissions

American National Standards Institute （ANSI), Gas particle size detection

ASTM D4180-23 Standard Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers
ASTM D4699-23 Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles

Indonesia Standards, Gas particle size detection

SNI 7117.13-2009