ZH
RU
ES

small thermal analysis

small thermal analysis, Total:347 items.

In the international standard classification, small thermal analysis involves: Analytical chemistry, Environmental protection, Meat, meat products and other animal produce, Shipbuilding and marine structures in general, Wind turbine systems and other alternative sources of energy, Ventilators. Fans. Air-conditioners, Domestic, commercial and industrial heating appliances, Insulating materials, Protection against fire, Refractories, Quality, Burners. Boilers, Small craft, Farming and forestry, Audio, video and audiovisual engineering, Applications of information technology, Thermodynamics and temperature measurements, Test conditions and procedures in general, Materials for aerospace construction, Iron and steel products, Ergonomics, Fishing and fish breeding, Vocabularies, Electrical accessories, Biology. Botany. Zoology, Fuels, Sterilization and disinfection, Welding, brazing and soldering, Road vehicle systems, Mechanical testing, Elements of buildings, Installations in buildings, Chipless working equipment, Integrated circuits. Microelectronics, Products of the chemical industry, Automatic controls for household use, Kitchen equipment, Plastics, Products of non-ferrous metals, Radiation protection, Water quality, Air quality, Rubber, Terminology (principles and coordination), Fasteners for aerospace construction, Fibre optic communications, Character sets and information coding, Raw materials for rubber and plastics, Information technology (IT) in general, Paints and varnishes, Aerospace electric equipment and systems, Home textiles. Linen.

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., small thermal analysis

ASHRAE SF-98-9-5-1998 Analytical Model for the Design of In-Slab Electric Heating Panels
ASHRAE LV-11-C001-2011 New Analytical and Numerical Solutions for the Short-term Analysis of Vertical Ground Heat Exchangers
ASHRAE 4192-1998 An Analytical Model to Predict the Condensation Heat Transfer Coefficient in Horizontal Microfin Tubes
ASHRAE 4423-2001 A Simple Approach to Thermal Performance Analysis of Small Hermetic Reciprocating Compressors
ASHRAE 3696-1993 Simple Analytical Model for the Design of Vertical Tube Absorbers
ASHRAE HVAC SYSTEMS AND EQUIPMENT IP CH 10-2012 SMALL FORCED-AIR HEATING AND COOLING SYSTEMS
ASHRAE HVAC SYSTEMS AND EQUIPMENT SI CH 10-2012 SMALL FORCED-AIR HEATING AND COOLING SYSTEMS
ASHRAE OR-05-11-3-2005 Evaluation of a Ventilation Heat Pump for Small Commercial Buildings
ASHRAE SF-98-31-3-1998 New Hot Water Consumption Analysis and Water-Heating System Sizing Methodology
ASHRAE DA-00-2-2000 Symposium on Miniaturized Heat Exchangers for Application in the HVAC&R Industry
ASHRAE 4323-2000 Comparison of Binary Mixture Heat and Mass Transfer Analysis with Single-Component Heat and Mass Transfer Analysis in the Design of GAX Absorber/Desorber
ASHRAE HVAC SYSTEMS AND EQUIPMENT SI CH 9-1996 Air Distribution Design for Small Heating and Cooling Systems
ASHRAE HVAC SYSTEMS AND EQUIPMENT IP CH 9-1996 Air Distribution Design for Small Heating and Cooling Systems
ASHRAE HVAC SYSTEMS AND EQUIPMENT IP CH 9-2000 Air Distribution Design for Small Heating and Cooling Systems
ASHRAE HVAC SYSTEMS AND EQUIPMENT SI CH 9-2000 Design of Small Forced-Air Heating and Cooling Systems
ASHRAE HVAC SYSTEMS AND EQUIPMENT SI CH 9-2004 Design of Small Forced-Air Heating and Cooling Systems
ASHRAE HVAC SYSTEMS AND EQUIPMENT SI CH 9-2008 DESIGN OF SMALL FORCED-AIR HEATING AND COOLING SYSTEMS
ASHRAE HVAC SYSTEMS AND EQUIPMENT IP CH 9-2008 DESIGN OF SMALL FORCED-AIR HEATING AND COOLING SYSTEMS
ASHRAE HVAC SYSTEMS AND EQUIPMENT IP CH 9-2004 Design of Small Forced-Air Heating and Cooling Systems
ASHRAE KC-03-10-4-2003 On the Effects of Decoupling Airflow and Heat Balance in Building Simulation Models
ASHRAE DA-07-057-2007 Comparative Analysis of four Solar Models for Tropical Sites (RP-1309)
ASHRAE OR-05-11-2-2005 Evaluation of Demand-Controlled Ventilation and Enthalpy Exchangers in Small Commerical Buildings
ASHRAE CH-06-7-2-2006 Assessment of Demand Limiting Using Building Thermal Mass in Small Commercial Buildings
ASHRAE SF-98-27-2-1998 Analytical Model for Hot-Gas Defrosting of a Cylindrical Coil Cooler: Part I - Model Development
ASHRAE PH-97-3-2-1997 Generalized Component Design Model by Combined Heat and Mass Transfer Analysis in NH3-H2O Absorption Heat Pump Systems
ASHRAE DA-07-058-2007 Impact of Solar Models on Building Energy Analysis for Tropical Sites ((RP-1309))
ASHRAE SF-98-27-3-1998 Analytical Model for Hot-Gas Defrosting of a Cylindrical Coil Cooler: Part II - Model Results and Conclusions

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, small thermal analysis

GB/T 18602-2001 Rock pyrolysis analysis
GB/T 18602-2012 Rock pyrolysis analysis
GB 4512-1984 Skid bricks and lower blocks for the small heating furnaces--Determination of silicon carbide
GB/T 41860.2-2022 Tools for moulding—Locating rings—Part 2:Locating rings for mounting with thermal insulating sheets in small or medium moulds (types C and D)
GB/T 41860.1-2022 Tools for moulding—Locating rings—Part 1:Locating rings for mounting without thermal insulating sheets in small or medium moulds (types A and B)

HU-MSZT, small thermal analysis

German Institute for Standardization, small thermal analysis

DIN 51006:2005 Thermal analysis (TA) - Thermogravimetry (TG) - Principles
DIN EN ISO 7933:2018 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using the predicted heat strain model (ISO/DIS 7933:2018); German and English version prEN ISO 7933:2018
DIN 53436-2:2015 Generation of thermal decomposition products from materials for their analytic-toxicological testing - Part 2: Thermal decomposition method
DIN 53436-4:2015 Generation of thermal decomposition products from materials for their analytic-toxicological testing - Part 4: Thermal decomposition method for liquids
DIN 53436-2:2015-12 Generation of thermal decomposition products from materials for their analytic-toxicological testing - Part 2: Thermal decomposition method
DIN 53436-4:2015-12 Generation of thermal decomposition products from materials for their analytic-toxicological testing - Part 4: Thermal decomposition method for liquids / Note: Applies in conjunction with DIN 53436-1 (2015-12), DIN 53436-2 (2015-12).
DIN EN 60127-1:2011 Miniature fuses - Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links (IEC 60127-1:2006 + A1:2011); German version EN 60127-1:2006 + A1:2011
DIN SPEC 13290:2021 Protein analysis - Evaluation criteria for thermal unfolding methods (DSF and DSC); Text in German and English
DIN 52241-2:1986 Analysis of raw materials used in glass production; chemical analysis of dolomite containing not less than 95 % of calcium magnesium carbonate; digestion method
DIN EN ISO 7933:2021-12 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO/DIS 7933.2:2021); German and English version prEN ISO 7933:2021 / Note: Date of issue 2021-10-29*Inte...
DIN EN ISO 7933:2004-12 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO 7933:2004); German version EN ISO 7933:2004 / Note: To be replaced by DIN EN ISO 7933 (2018-05), DIN ...
DIN 58947-5:1990 Sterilization; hot air sterilizers; small sterilizers, requirements
DIN EN 60127-1:2015 Miniature fuses - Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links (IEC 60127-1:2006 + A1:2011 + A2:2015); German version EN 60127-1:2006 + A1:2011 + A2:2015
DIN EN 656/A1:2006 Gas-fired central heating boilers - Type B boilers of nominal heat input exceeding 70 kW, but not exceeding 300 kW; English version of DIN EN 656/A1:2006-12
DIN 53436-1:2015 Generation of thermal decomposition products from materials for their analytic-toxicological testing - Part 1: Decomposition apparatus and determination of test temperature
DIN 53436-1:2015-12 Generation of thermal decomposition products from materials for their analytic-toxicological testing - Part 1: Decomposition apparatus and determination of test temperature
DIN EN ISO 7730:2006 Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria (ISO 7730:2005); English version of DIN EN ISO 7730:2006-05
DIN EN ISO 7730:2023-04 Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria (ISO/DIS 7730:2023); German and English version prEN ISO 7730:2023 / ...
DIN EN ISO 7730:2006-05 Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria (ISO 7730:2005); German version EN ISO 7730:2005
DIN EN ISO 7730 Berichtigung 1:2007-06 Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria (ISO 7730:2005); German version EN ISO 7730:2005, Corrigenda to DIN E...
DIN EN ISO 14895:2016-11 Small craft - Liquid-fuelled galley stoves and heating appliances (ISO 14895:2016); German version EN ISO 14895:2016
DIN EN 15270:2008-03 Pellet burners for small heating boilers - Definitions, requirements, testing, marking; German version EN 15270:2007
DIN ISO 10907-2:2010-05 Tools for moulding - Locating rings - Part 2: Locating rings for mounting with thermal insulating sheets in small or medium moulds (types C and D) (ISO 10907-2:2007)
DIN EN 4379:2008 Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) - Solution treated, forging D<(Index)e> 200 mm; German and English version EN 4379:2007
DIN EN 15270:2008 Pellet burners for small heating boilers - Definitions, requirements, testing, marking; English version of DIN EN 15270:2008-03
DIN EN ISO 294-3:2020-11 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2020); German version EN ISO 294-3:2020
DIN EN 17667:2022-08 Test method - Determination of thermal resistance of filled textile articles and similar items using small guarded hotplate apparatus; German version EN 17667:2022
DIN EN ISO 7730:2023 Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria (ISO/DIS 7730:2023); German and English version prEN ISO 7730:2023
DIN EN ISO 23674:2022 Cosmetics - Analytical methods - Direct determination of traces of mercury in cosmetics by thermal decomposition and atomic absorption spectrometry (mercury analyser) (ISO 23674:2022)
DIN EN 17667:2022 Test method - Determination of thermal resistance of filled textile articles and similar items using small guarded hotplate apparatus
DIN EN 17667:2021 Test method - Determination of thermal resistance of filled textile articles and similar items using small guarded hotplate apparatus; German and English version prEN 17667:2021

Professional Standard - Petroleum, small thermal analysis

SY/T 5117-1996 Rock pyrolysis analysis method
SY/T 6188-1996 Gas Chromatographic Analysis Method of Rock Pyrolysis
SY/T 6188-2016 Gas Chromatographic Analysis Method of Rock Pyrolysis

Qinghai Provincial Standard of the People's Republic of China, small thermal analysis

DB63/T 1773-2020 Technical specifications for small-scale pyrolysis gasification treatment engineering of domestic waste

Group Standards of the People's Republic of China, small thermal analysis

T/GDAEPI 08-2022 Technical specifications for small-scale pyrolysis incineration treatment engineering of domestic waste in villages and towns
T/CAB 0084-2021 Techinicol specification of Small-sized proton exchange membrane water electrolysis system for hydrogen production
T/SDSZXJJ 005-2023 Assessment specification of digital transformation for small and medium-sized enterprises
T/CASME 255-2023 Domestic waste pyrolysis regeneration transformation environmental protection equipment
T/CIECCPA 018-2023 Energy efficiency test method of small capacity electric heating boiler and its system
T/BSRS 100-2023 Thermodynamic safety evaluation method for Small Fluoride salt-cooled High-temperature Reactor
T/BSRS 101-2023 Safety Evaluation Method for Design Basis Accident Analysis for Small Fluorine Salt Cooled High Temperature Reactor
T/CALAS 82-2020 Laboratory animal-Standard for preparation and evaluation of dengue susceptible mouse animal model
T/SIA 022.1-2021 Service capability maturity for Top-Level node of identification and resolution system of industrial internet—Part 1:Model
T/SIA 023.1-2021 Service capability maturity for Secondary-Level node of identification and resolution system of industrial internet—Part 1:Model
T/SIA 024.1-2021 Service capability maturity for Enterprise node of identification and resolution system of industrial internet—Part 1: Model
T/ZZB 0620-2018 External flat overload protectors for minitype hermetic refrigeration motor-compressors

中国石油天然气总公司, small thermal analysis

SY/T 6015-1994 Oil and gas display analyzer rock pyrolysis analysis method

RU-GOST R, small thermal analysis

GOST 6606-2015 Hot-smoked small-sized fish. Specifications
GOST R ISO 7730-2009 Ergonomics of the thermal environment. Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria

国家能源局, small thermal analysis

SY/T 7661-2022 Pyrolysis analysis method of oil content in mud shale
NB/T 34041-2017 Test methods for small biomass hot blast stoves
NB/T 34040-2017 Technical conditions of small biomass hot blast furnace
NB/T 10941-2022 Technical conditions for small boilers and normal pressure hot water boilers

Professional Standard-Ships, small thermal analysis

CB 3305-1987 Small adjustable electric water heater
CB* 3305-1987 Small adjustable electric water heater

(U.S.) Ford Automotive Standards, small thermal analysis

FORD FLTM EU-AZ 053-01-2001 PYROLYTIC GAS CHROMATOGRAPHIC ANALYSIS OF FRICTION MATERIALS
FORD FLTM EU-AZ 053-1-2001 PYROLYTIC GAS CHROMATOGRAPHIC ANALYSIS OF FRICTION MATERIALS
FORD FLTM EU-BO 060-01-2001 HYDROLYSIS RESISTANCE OF THERMOPLASTIC MOULDING COMPOUNDS (EXTRACTION-HYDROLYSIS-OXIDATION TEST, EHO-TEST)

U.S. Military Regulations and Norms, small thermal analysis

ARMY UFGS-02 53 16-2010 REMEDIATION OF CONTAMINATED SOILS BY THERMAL DESORPTION
ARMY TM 5-642-1990 OPERATION AND MAINTENANCE SMALL HEATING SYSTEMS
ARMY MIL-PRF-32197-2006 HEATER, SPACE - NON-POWERED, LIQUID FUEL, SMALL
ARMY MIL-PRF-32197 VALID NOTICE 1-2011 Heater, Space - Non-Powered, Liquid Fuel, Small
ARMY QPL-372-26 NOTICE 1-2008 QUALIFIED PRODUCTS LIST (MILITARY) Cleaning Compound, Solvent (Flor Bore of Small Arms and Automatic Aircraft Weapons)

American Society for Testing and Materials (ASTM), small thermal analysis

ASTM E1131-98 Standard Test Method for Compositional Analysis by Thermogravimetry
ASTM E1131-08(2014) Standard Test Method for Compositional Analysis by Thermogravimetry
ASTM E1131-03 Standard Test Method for Compositional Analysis by Thermogravimetry
ASTM E1684-10 Standard Specification for Miniature Thermocouple Connectors
ASTM E1684-05 Standard Specification for Miniature Thermocouple Connectors
ASTM E1641-07 Standard Test Method for Decomposition Kinetics by Thermogravimetry
ASTM E1641-07(2012) Standard Test Method for Decomposition Kinetics by Thermogravimetry
A-A-59410A-2015 Standard Test Method for Decomposition Kinetics by Thermogravimetry
A-A-54409 NOT 1-2012 Standard Test Method for Decomposition Kinetics by Thermogravimetry
A-A-59163A-2010 Standard Test Method for Decomposition Kinetics by Thermogravimetry
ASTM E1641-99 Standard Test Method for Decomposition Kinetics by Thermogravimetry
A-A-54409-1991 Standard Test Method for Decomposition Kinetics by Thermogravimetry
A-A-55281-1995 Standard Test Method for Decomposition Kinetics by Thermogravimetry
A-A-55220-1995 Standard Test Method for Decomposition Kinetics by Thermogravimetry
A-A-54923-1993 Standard Test Method for Decomposition Kinetics by Thermogravimetry
A-A 59377B-2016 Standard Test Method for Decomposition Kinetics by Thermogravimetry
ASTM E2008-04 Standard Test Method for Volatility Rate by Thermogravimetry
ASTM E2008-06 Standard Test Method for Volatility Rate by Thermogravimetry
ASTM D6382/D6382M-99(2011)e1 Standard Practice for Dynamic Mechanical Analysis and Thermogravimetry of Roofing and Waterproofing Membrane Material
ASTM E1726-95 Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis
ASTM E1726-20 Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis
ASTM E1641-15 Standard Test Method for Decomposition Kinetics by Thermogravimetry Using the Ozawa/Flynn/Wall Method
ASTM E1641-16 Standard Test Method for Decomposition Kinetics by Thermogravimetry Using the Ozawa/Flynn/Wall Method
ASTM E1726-16 Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis
ASTM E1641-23 Standard Test Method for Decomposition Kinetics by Thermogravimetry Using the Ozawa/Flynn/Wall Method
ASTM E1641-18 Standard Test Method for Decomposition Kinetics by Thermogravimetry Using the Ozawa/Flynn/Wall Method
ASTM E1641-13 Standard Test Method for Decomposition Kinetics by Thermogravimetry Using the Ozawa/Flynn/Wall Method
ASTM E2403-04 Standard Test Method for Sulfated Ash of Organic Materials by Thermogravimetry
ASTM E1726-01 Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis
ASTM E2403-06 Standard Test Method for Sulfated Ash of Organic Materials by Thermogravimetry
ASTM E1726-01(2009) Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis
ASTM E2403-06(2012) Standard Test Method for Sulfated Ash of Organic Materials by Thermogravimetry
ASTM E1645-21 Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
ASTM E1645-20 Standard Practice for the Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
ASTM E1645-20a Standard Practice for the Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
ASTM E3007-15 Standard Practice for Kinetic Values Used to Evaluate the Study of Decomposition Reactions by Thermogravimetry
ASTM E1645-16 Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
ASTM E1645-01 Standard Practice for the Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
ASTM E1645-94 Standard Practice for the Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
ASTM E1645-01(2007) Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
ASTM E1645-01(2016)e1 Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis

Korean Agency for Technology and Standards (KATS), small thermal analysis

KS B 8208-2005 Small-size gas absorption cooling and heating machines
KS B 8208-2002 Small-size gas absorption cooling and heating machines
KS V 6811-2013 Ships small size fuel oil heaters
KS V 6811-2005(2010) Ships small size fuel oil heaters
KS V 6811-1977 Ships small size fuel oil heaters
KS B 6034-2010 Oil burning water heaters for domestic use
KS V 6811-2005 Ships small size fuel oil heaters
KS V 0311-2012(2022) Schemes of thermal insulation of piping for small ships
KS V 0311-1982 Schemes of thermal insulation of piping for small ships
KS B 8903-2017(2022) Pellet combustion device for small heating boilers
KS V 0312-2006 Standard practice for thermal insulation work forsmall ship’s airconditioning ducts
KS A ISO 7933-2005(2021) Ergonomics of the thermal environment－Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
KS V 0311-2012(2017) Schemes of thermal insulation of piping for small ships
KS V 0311-2012 Schemes of thermal insulation of piping for small ships
KS V 0312-2006(2021) Standard practice for thermal insulation work forsmall ship’s airconditioning ducts
KS V 0312-2006(2016) Standard practice for thermal insulation work forsmall ship’s airconditioning ducts
KS A ISO 7730-2010(2021) Ergonomics of the thermal environment－Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria
KS B ISO 10907-1-2012(2017) Tools for moulding－Locating rings－Part 1：Locating rings for mounting without thermal insulating sheets in small or medium moulds－Types A and B
KS I ISO 15680:2010 Water quality－Gas-chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and several chlorinated compounds using purge-and-trap and thermal desorption
KS A ISO 7730:2010 Ergonomics of the thermal environment－Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria
KS B ISO 10907-1-2012(2022) Tools for moulding－Locating rings－Part 1：Locating rings for mounting without thermal insulating sheets in small or medium moulds－Types A and B
KS M ISO 7270-2:2007 Rubber－Analysis by pyrolytic gas-chromatographic methods－Part 2：Determination of styrene/butadiene/isoprene ratio
KS M ISO 7270-2-2017(2022) Rubber — Analysis by pyrolytic gas-chromatographic methods — Part 2: Determination of styrene/butadiene/isoprene ratio
KS M ISO 7270-2:2017 Rubber — Analysis by pyrolytic gas-chromatographic methods — Part 2: Determination of styrene/butadiene/isoprene ratio

British Standards Institution (BSI), small thermal analysis

BS 8433:2004 Microwavable personal warmers - Specification
BS EN ISO 7933:2004 Ergonomics of the thermal environment. Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
BS EN ISO 7933:2023 Ergonomics of the thermal environment. Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
18/30312137 DC BS EN ISO 7933. Ergonomics of the thermal environment. Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
21/30436560 DC BS EN ISO 7933.2. Ergonomics of the thermal environment. Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
BS EN ISO 23674:2022 Cosmetics. Analytical methods. Direct determination of traces of mercury in cosmetics by thermal decomposition and atomic absorption spectrometry (mercury analyser)
BS EN ISO 294-3:2020 Plastics. Injection moulding of test specimens of thermoplastic materials - Small plates
BS EN 12515:1997 Hot Environments - Analytical Determination and Interpretation of Thermal Stress Using Calculation of Required Sweat Rate ISO 7933: 1989 Modified
BS EN ISO 7730:2005 Ergonomics of the thermal environment. Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria
BS ISO 7270-1:2003+A1:2010 Rubber. Analysis by pyrolytic gas-chromatographic methods. Identification of polymers (single polymers and polymer blends)
BS ISO 10907-2:2007 Tools for moulding. Locating rings. Locating rings for mounting with thermal insulating sheets in small or medium moulds (types C and D)
BS ISO 10907-1:2008 Tools for moulding - Locating rings - Locating rings for mounting without thermal insulating sheets in small or medium moulds (types A and B)
BS ISO 248-2:2012 Rubber, raw. Determination of volatile-matter content. Thermogravimetric methods using an automatic analyser with an infrared drying unit
BS EN ISO 7730:2006 Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria
BS EN 15270:2007 Pellet burners for small heating boilers - Definitions, requirements, testing, marking
21/30387777 DC BS EN ISO 23674. Cosmetics. Analytical methods. Direct determination of traces of mercury in cosmetics by thermal decomposition. Atomic absorption spectrometry (mercury analyzer)
BS EN 4379:2007 Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) - Solution treated, forging De 200 mm
BS ISO 34-2:2015 Rubber, vulcanized or thermoplastic. Determination of tear strength. Small (Delft) test pieces
BS ISO 34-2:2011 Rubber, vulcanized or thermoplastic. Determination of tear strength. Small (Delft) test pieces
BS EN 17667:2022 Test method. Determination of thermal resistance of filled textile articles and similar items using small guarded hotplate apparatus
23/30464386 DC BS EN ISO 7730. Ergonomics of the thermal environment. Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria
BS ISO 7270-2:2012 Rubber. Analysis by pyrolytic gas-chromatographic methods. Determination of styrene/butadiene/isoprene ratio
BS ISO 7270-1:2020 Rubber. Analysis by pyrolytic gas-chromatographic methods - Identification of polymers (single polymers and polymer blends)
BS ISO 10724-2:1999 Plastics. Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs). Small plates
BS EN ISO 10724-2:1999 Plastics. Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs). Small plates
BS 8511:2010 Code of practice for the installation of solid fuel heating and cooking appliances in small craft
BS EN ISO 10724-2:2001 Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Small plates
BS ISO 12988-2:2004 Carbonaceous materials used in the production of aluminium - Baked anodes - Determination of the reactivity to carbon dioxide - Thermogravimetric method

American National Standards Institute （ANSI), small thermal analysis

ANSI/ASTM D3850:2012 Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials by Thermogravimetric Method (TGA)

Professional Standard - Ferrous Metallurgy, small thermal analysis

YB/T 5114-1993 Skid bricks and lower blocks for the small heating furnaces determination of silicon carbide
YB 2216-1980 Slide bricks and seat bricks for small heating furnaces

IETF - Internet Engineering Task Force, small thermal analysis

RFC 3226-2001 DNSSEC and IPv6 A6 aware server esolver message size requirements

United States Navy, small thermal analysis

NAVY MIL-D-81347 C VALID NOTICE 1-1988 DATA ANALYSIS PROGRAMMING GROUP AN/AYA-8B
NAVY MIL-D-81347 C-1974 DATA ANALYSIS PROGRAMMING GROUP AN/AYA-8B

Professional Standard - Agriculture, small thermal analysis

832药典一部-2015 Prescription preparation and single preparation Sanhua Xiaoer Jiere Pills
838药典一部-2020 Prescription preparation and single preparation Sanhua Xiaoer Jiere Pills
799药典一部-2010 Prescription preparation and single preparation Sanhua Xiaoer Jiere Pills
1254药典中药成方制剂卷-2010 Sections on Pediatrics 1. Superficial Relief Agent Xiaoer Fengreqing Oral Liquid
1261药典中药成方制剂卷-2010 Sections on Pediatrics 1. Anti-surperficial agent Xiaoer Resuqing Oral Liquid
1259药典中药成方制剂卷-2010 Sections on Pediatrics 1. Antipyretic agent for children with antipyretic oral liquid (granules)
1269药典中药成方制剂卷-2010 Sections on Pediatrics 1. Anti-surgical agent Xiaoer Qingre Lifei Oral Liquid
空气和废气监测分析方法 7.1.2-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particles Chapter 1 Basic Theory of Chemical Mass Balance (CMB) Receptor Model Two Basic Principles of Double Source Apportionment Technology

NZ-SNZ, small thermal analysis

NZS 4218:2009 Thermal Insulation - Housing and Small Buildings

农业农村部, small thermal analysis

NY/T 3496-2019 Kinetic parameters of thermal cracking of agricultural biomass raw materials using thermogravimetric analysis
SC/T 5106-2017 Ornamental fish farm conditions small tropical fish

Association Francaise de Normalisation, small thermal analysis

NF EN 16900:2018 Huiles de pyrolyse rapide pour application chaudières - Spécifications et méthodes d'analyses
NF EN 4573:2020 Série aérospatiale - Alliage résistant à chaud X12CrNiCoMoW21-20 - Mis en solution et précipité - Barres et profilés - De inférieur ou égal à 100 mm
FD X50-159:2013 Functional analysis and value analysis - Practical guide for very small-sized businesses and SMEs - Application guide for the "functional analysis and value analysis" approach
NF A45-007:2021 Produits sidérurgiques - Petits fers en U laminés à chaud - Dimensions et tolérances
NF EN ISO 7933:2005 Ergonomie des ambiances thermiques - Détermination analytique et interprétation de la contrainte thermique fondées sur le calcul de l'astreinte thermique prévisible
NF T70-538:2003 Energetic materials for defense - Safety, vulnerability - Compatibility by thermo-gravimetric analysis
NF EN ISO 14895:2016 Petits navires - Réchauds de cuisine et appareils de chauffage alimentés par un combustible liquide
NF X70-100-1:2006 Essais de comportement au feu - Analyse des effluents gazeux - Partie 1 : méthodes d'analyses des gaz provenant de la dégradation thermique
NF A45-001:1994 IRON AND STEEL. HOT ROLLED BARS OR MERCHANT BARS AND SECTIONS FOR GENERAL PURPOSES. TOLERANES ON SHAPE AND DIMENSIONS.
NF EN ISO 294-2:2018 Plastiques - Moulage par injection des éprouvettes de matériaux thermoplastiques - Partie 2 : Barreaux de traction de petites dimensions
NF EN ISO 23674:2022 Cosmétiques - Méthodes d'analyse - Dosage direct des traces de mercure dans les cosmétiques par décomposition thermique et spectrométrie d'absorption atomique (analyseur de mercure)
NF D35-348*NF EN 13836:2006 Gas-fired central heating boilers - Type B boilers of nominal heat input exceeding 300 kW, but not exceeding 1000 kW
NF EN ISO 7730:2006 Ergonomie des ambiances thermiques - Détermination analytique et interprétation du confort thermique par le calcul des indices PMV et PPD et par des critères de confort thermique local
NF E63-509-2:2001 Tools for moulding - Locating rings - Part 2 : locating rings for mounting with thermal insulating sheets in small or medium moulds - Types C and D.
NF T90-129*NF EN ISO 15680:2004 Water quality - Gas-chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and several chlorinated compounds using purge-and-trap and thermal desorption.
NF T51-294-3*NF EN ISO 294-3:2020 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3 : small plates
NF EN 15270:2008 Brûleurs à granulés pour petites chaudières de chauffage - Définitions, exigences, essais, marquage
NF ISO 10907-1:2009 Outillage de moulage - Bagues de centrage - Partie 1 : bagues de centrage pour montage sans feuille d'isolation thermique dans les petits et les moyens moules (Types A et B)
NF X11-632-4/A1*NF ISO 9276-4/A1:2018 Representation of results of particle size analysis - Part 4 : Characterization of a classification process - Amendment 1 : Additional explanations and minor corrections
NF X35-203*NF EN ISO 7730:2006 Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria.
NF ISO 10907-2:2008 Outillage de moulage - Bagues de centrage - Partie 2 : bagues de centrage pour montage avec feuille d'isolation thermique dans les petits et les moyens moules (types C et D)
NF E31-359*NF EN 15270:2008 Pellet burners for small heating boilers - Definitions, requirements, testing, marking
NF L10-713*NF EN 4379:2008 Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) - Solution treated, forging De < or = 200 mm
NF E63-509-2*NF ISO 10907-2:2008 Tools for moulding - Locating rings - Part 2 : locating rings for mounting with thermal insulating sheets in small or medium moulds - (types C and D)
NF T51-294-2*NF EN ISO 294-2:2018 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars
NF EN ISO 294-3:2020 Plastiques - Moulage par injection des éprouvettes de matériaux thermoplastiques - Partie 3 : plaques de petites dimensions
NF T46-051-2*NF ISO 7270-2:2012 Rubber - Analysis by pyrolytic gas-chromatographic methods - Part 2: determination of styrene/butadiene/isoprene ratio
NF E63-509-1:1997 Tools for moulding. Locating rings. Part 1 : locating rings for mounting without thermal insulating sheets in small or medium moulds. Types A and B.

Professional Standard - Electron, small thermal analysis

SJ/Z 9182-1995 Specifications for determination of super-miniature aluminum electrolytic capacitors used for VCR

UNKNOWN, small thermal analysis

YB 2216-80

Society of Automotive Engineers (SAE), small thermal analysis

SAE AMS5365E-2013 Castings, Sand, Corrosion and Heat Resistant, 24Cr - 20.5Ni, Solution Heat Treated
SAE AMS4446B-2006 Magnesium Alloy, Sand Castings 8.7Al - 0.70Zn - 0.26Mn (AZ91E-T6) Solution and Precipitation Heat Treated UNS M11919
SAE AMS4446C-2012 Magnesium Alloy, Sand Castings 8.7Al 0.70Zn 0.26Mn Solution and Precipitation Heat Treated
SAE AMS4113E-2003 Aluminum Alloy, Extruded Profiles 1.0Mg 0.60Si 0.28Cu 0.20Cr (6061-T6) Solution and Precipitation Heat Treated
SAE AMS4332-2005 Aluminum Alloy, Extruded Profiles (73490T76511) 8.1Zn 1.7Cu 2.2Mg 0.16Zr Solution Heat Treated, Stress Relieved, and Overaged
SAE AMS5587F-2010 Nickel Alloy, Corrosion and Heat Resistant, Seamless Tubing 47.5Ni 22Cr 1.5Co 9.0Mo 0.60W 18.5Fe Solution Heat Treated
SAE AMS4427B-2007 Magnesium Alloy Castings, Sand 4.0Y - 2.3Nd - 0.7Zr (WE43B - T6) Solution and Precipitation Heat Treated UNS M18432
SAE AS7479B-2008 Bolts and Screws, Steel, UNS S66286 1650 °F Solution Heat Treated Precipitation Heat Treated Before Roll Threaded
SAE AMS4083L-2012 Aluminum Alloy Tubing, Hydraulic, Seamless, Drawn, Round 1.0Mg 0.60Si 0.28Cu 0.20Cr (6061-T6) Solution and Precipitation Heat Treated
SAE AMS5592F-2013 Iron-Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 44Fe - 18.5Cr - 35Ni - 1.15Si, Solution Heat Treated
SAE AMS4418G-2004 Magnesium Alloy, Sand Castings 2.5Ag - 2.1Di - 0.70Zr (QE22A-T6) Solution and Precipitation Heat Treated
SAE AS5419/1-2003 WIRE, THERMOCOUPLE, HIGH TEMPERATURE AND FIRE RESISTANT LIGHT WEIGHT, SMALL DIAMETER NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANGANESE (KN) THERMOCOUPLE EXTENSION, 260 DEGREES C

National Metrological Verification Regulations of the People's Republic of China, small thermal analysis

JJG(地质) 1018-1990 Verification Regulations for DT-301B Thermal Analyzer

International Organization for Standardization (ISO), small thermal analysis

ISO/FDIS 7933 Ergonomics of the thermal environment — Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
ISO 7933:2023 Ergonomics of the thermal environment — Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
ISO/DIS 7730 Ergonomics of the thermal environment — Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria
ISO 15680:2003 Water quality - Gas-chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and several chlorinated compounds using purge-and-trap and thermal desorption
ISO 294-3:2020 Plastics — Injection moulding of test specimens of thermoplastic materials — Part 3: Small plates
ISO 23674:2022 Cosmetics — Analytical methods — Direct determination of traces of mercury in cosmetics by thermal decomposition and atomic absorption spectrometry (mercury analyser)
ISO 7730:2005 Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria
ISO 10907-1:1996 Tools for moulding - Locating rings - Part 1: Locating rings for mounting without thermal insulating sheets in small or medium moulds - Types A and B
ISO 10907-2:2007 Tools for moulding - Locating rings - Part 2: Locating rings for mounting with thermal insulating sheets in small or medium moulds (types C and D)
ISO 248-2:2012 Rubber, raw - Determination of volatile-matter content - Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit
ISO 7270-2:2005 Rubber - Analysis by pyrolytic gas-chromatographic methods - Part 2: Determination of styrene/butadiene/isoprene ratio
ISO 7270-2:2012 Rubber - Analysis by pyrolytic gas-chromatographic methods - Part 2: Determination of styrene/butadiene/isoprene ratio

CZ-CSN, small thermal analysis

CSN 42 5716-1981 Hot forming seamless steel tubes with smaller tolerances. Dimensions

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), small thermal analysis

ASHRAE SYSTEMS AND EQUIP IP CH 10-2012 SMALL FORCED-AIR HEATING AND COOLING SYSTEMS
ASHRAE SYSTEMS AND EQUIP SI CH 10-2012 SMALL FORCED-AIR HEATING AND COOLING SYSTEMS
ASHRAE EQUIP SI CH 9-2008 DESIGN OF SMALL FORCED-AIR HEATING AND COOLING SYSTEMS

YU-JUS, small thermal analysis

JUS B.H8.373-1977 Method of analysis of coaland coke. Ste analysis of small coke (nomirml top size 20 mm or less)
JUS B.H8.340-1987 Methods of analysis of coal and coke. Determination of the bulk den$ity of coke in a small container

Professional Standard - Machinery, small thermal analysis

JB/T 7948.6-1999 Methods for chemical analysis of melted welding fluxes.The pyrolytic method for determination of calcium fluoride content
JB/T 7985-2002 Specification for small type boilers and atmospheric hot water boilers
JB/T 6230-1992 Small electrothermal electrode drying ovens. Technical specification
JB/T 7985-1995 Specification for small type boilers and atmospheric hot water boilers
JB/T 6739.2-2015 Minitype all-closed thermal protectors for refrigeration motor-compressors
JB/T 6739.2-1993 Small totally enclosed refrigeration motor - Thermal protector of compressor

IT-UNI, small thermal analysis

Danish Standards Foundation, small thermal analysis

DS/EN ISO 7933:2004 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
DS/EN ISO 7730:2006 Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria
DS/EN ISO 294-3:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates
DS/EN ISO 294-2/A1:2005 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars
DS/EN ISO 294-2:1999 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars.

JP-JEM, small thermal analysis

JEM TR 250-2011 Guidelines of recycle designs for small polymer electrolyte fuel cell systems

European Committee for Standardization (CEN), small thermal analysis

EN 4318:2007 Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Solution treated and precipitation treated, bar and section De <= 100 mm, Rm >= 960 MPa
EN ISO 7933:2023 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO 7933:2023)
FprEN ISO 7933 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO/FDIS 7933:2023)
EN 12515:1997 Hot Environments - Analytical Determination and Interpretation of Thermal Stress Using Calculation of Required Sweat Rate ISO 7933: 1989 Modified
prEN 461-1991 Dedicated liquefied petroleum gas appliances; small non-domestic space heaters
EN ISO 23674:2022 Cosmetics - Analytical methods - Direct determination of traces of mercury in cosmetics by thermal decomposition and atomic absorption spectrometry (mercury analyser) (ISO 23674:2022)
EN ISO 15680:2003 Water quality - Gas-chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and several chlorinated compounds using purge-and-trap and thermal desorption ISO 15680:2003
EN 4379:2007 Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) - Solution treated, forging De less than or equal to 200 mm
EN 15270:2007 Pellet burners for small heating boilers - Definitions, requirements, testing, marking
prEN ISO 7730 Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria (ISO/DIS 7730:2023)
prEN ISO 23674:2021 Cosmetics - Analytical methods - Direct determination of traces of mercury in cosmetics by thermal decomposition - Atomic absorption spectrometry (mercury analyzer) (ISO/DIS 23674:2021)
prEN 17667-2021 Test method - Determination of thermal resistance of filled textile articles and similar items using small guarded hotplate apparatus
EN ISO 7730:2005 Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria

GOSTR, small thermal analysis

GOST R 57794-2017 Ergonomics of the thermal environment. Analytical determination and interpretation of heat stress using calculation of the predicted heat strain

DE-VDA, small thermal analysis

VDA 278-2011 Thermal desorption analysis of organic emissions for the characterization of non-metallic materials for automobiles

AASHTO - American Association of State Highway and Transportation Officials, small thermal analysis

SCCA-1997 Segregation Causes and Cures for Hot Mix Asphalt (Revision 1)

Lithuanian Standards Office , small thermal analysis

LST EN ISO 7933:2004 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO 7933:2004)
LST EN ISO 7730:2006 Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria (ISO 7730:2005)

AENOR, small thermal analysis

UNE-EN ISO 7933:2005 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO 7933:2004)
UNE-EN ISO 7730:2006 Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria (ISO 7730:2005)
UNE-EN ISO 294-2:1999 PLASTICS - INJECTION MOULDING OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS - PART 2: SMALL TENSILE BARS (ISO 294-2:1996)

CN-STDBOOK, small thermal analysis

图书 A-5078 Analysis of answers to typical exercises of the second-level registered metrologist qualification examination (2022 edition)
图书 A-5077 Analysis of answers to typical exercises of the first-level registered metrologist qualification examination (2022 edition)

American Society of Mechanical Engineers (ASME), small thermal analysis

ASME RTP-1-2015 Reinforced Thermoset Plastic Corrosion-Resistant Equipment (Incorporates Interpretation No. 9)
ASME 1896-2-2001 Miniature Electric Boilers Fabricated of Austenitic Stainless Steel Section I ANNULLED

未注明发布机构, small thermal analysis

SAE AMS4446D-2018 Magnesium Alloy, Sand Castings 8.7Al - 0.70Zn - 0.26Mn (AZ91E-T6) Solution and Precipitation Heat Treated UNS M11919
NF X70-100-2:2006 Essais de comportement au feu - Analyse des effluents gazeux - Partie 2 : méthode de dégradation thermique au four tubulaire
BS EN ISO 7730:2005(2006) Ergonomics of the thermal environment — Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria
DIN EN ISO 294-3:1998 Plastics Injection molding of thermoplastic test specimens Part 3: Small plates
BS ISO 10907-2:2007(2011) Tools for moulding — Locating rings — Part 2 : Locating rings for mounting with thermal insulating sheets in small or medium moulds (types C and D)
DIN EN ISO 294-2:1998 Plastics — Injection molding of test specimens of thermoplastic materials — Part 2: Small tensile bars

Heilongjiang Provincial Standard of the People's Republic of China, small thermal analysis

DB23/T 1641-2015 Design and operation management rules for small central heating system
DB23/T 3081-2022 Heilongjiang Industrial Internet Logo Analysis (Comprehensive) Secondary Node Operation Specification
DB23/T 3079-2022 Heilongjiang Industrial Internet logo analysis (comprehensive) secondary node logo assignment rules

Compressed Gas Association (U.S.), small thermal analysis

CGA G-6.5-2013 Standard for small stationary insulated carbon dioxide supply systems

Defense Logistics Agency, small thermal analysis

DLA SMD-5962-85084 REV C-2006 MICROCIRCUIT, DIGITAL, LOW-POWER SCHOTTKY, TTL, DECODERS/DRIVERS, MONOLITHIC SILICON
DLA SMD-5962-83017 REV G-2005 MICROCIRCUIT, DIGITAL, LOW POWER, SCHOTTKY, TTL, DECODER/DEMULTIPLEXER, MONOLITHIC SILICON

JP-JCS, small thermal analysis

JCS 7505-2007 Fire proof test methods with small-type furnace for cable joints

Professional Standard - Recommended Standards for Engineering Construction, small thermal analysis

CECS 313-2012 Technical specification for ground source heat pump in village and small township

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, small thermal analysis

PREN 4569-1999 Aerospace Series Heat Resisting Alloy CO-PH4101 (CoCr20W15Ni) Vacuum Melted Solution Treated Wire D Less Than or Equal to 4 mm (Edition P1)
PREN 2166-1994 Aerospace Series Heat Resisting Alloy CO-PH4101 Vacuum Melted Solution Treated Wire D Less Than or Equal to 4 mm (Issue EN)
PREN 4567-1999 Aerospace Series Heat Resisting Alloy CO-PH4101 (CoCr20W15Ni) Vacuum Melted solution Treated Bar and Section a or D Less Than or Equal to 100 mm (Edition P1)

American Gear Manufacturers Association, small thermal analysis

AGMA 12FTM21-2012 Typical Heat Treatment Defects of Gears and Solutions Using FEA Modeling

AGMA - American Gear Manufacturers Association, small thermal analysis

12FTM21-2012 Typical Heat Treatment Defects of Gears and Solutions Using FEA Modeling

Natural Gas Processor's Association (NGPA), small thermal analysis

GPA RR-130-1995 Thermodynamically Consistent Model for the Prediction of Solubilities and Enthalpies of Solution of Acid Gases in Aqueous Alkanolamine Solutions

FI-SFS, small thermal analysis

NORDEST NT FIRE 020-1985 SMALL CHIMNEYS:HEAT INSULATION, TIGHTNESS AND MECHANICAL STRENGTH AT ELEVATED TEMPERATURES

Shanghai Provincial Standard of the People's Republic of China, small thermal analysis

DB31/ 213-2010 Specification for Small Type Boilers and Atmospheric Hot Water Boilers and Operation Management
DB31/T 213-2020 Technical Requirements and Operation Management of Small Boilers and Atmospheric Hot Water Boilers

工业和信息化部, small thermal analysis

YD/T 3130-2016 Smart miniaturized hot-pluggable (Smart SFP) optical transceiver module for communications

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, small thermal analysis

GB/T 18049-2017 Ergonomics of the thermal environment—Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria

European Telecommunications Standards Institute (ETSI), small thermal analysis

ETSI SR 001 544-2011 Small and Medium-sized Enterprises (SMEs) in Standardization; Understanding and supporting SME involvement in ICT standardization (V1.1.1)

ES-UNE, small thermal analysis

UNE-EN ISO 23674:2023 Cosmetics - Analytical methods - Direct determination of traces of mercury in cosmetics by thermal decomposition and atomic absorption spectrometry (mercury analyser) (ISO 23674:2022)
UNE-EN 17667:2022 Test method - Determination of thermal resistance of filled textile articles and similar items using small guarded hotplate apparatus

CEN - European Committee for Standardization, small thermal analysis

EN ISO 7730:1995 Moderate Thermal Environments - Determination of the PMV and PPD Indices and Specification of the Conditions for Thermal Comfort

GB-REG, small thermal analysis

REG NASA-LLIS-0822-2000 Lessons Learned ?Design of a Small Apparatus for Improved Vibration/Thermal Testing

BE-NBN, small thermal analysis

NBN 663-F-1966

机械工业部, small thermal analysis

JB/T 6739.1-1993 Small fully enclosed refrigeration motor--safety requirements for thermal protector for compressor

Association of German Mechanical Engineers, small thermal analysis

VDI 2465 Blatt 1-1996 Measurement of soot (immission) - Chemical analysis of elemental carbon by extraction and thermal desorption of the organic carbon

AT-ON, small thermal analysis

OENORM EN ISO 23674:2021 Cosmetics - Analytical methods - Direct determination of traces of mercury in cosmetics by thermal decomposition - Atomic absorption spectrometry (mercury analyzer) (ISO/DIS 23674:2021)

SAE - SAE International, small thermal analysis

SAE AS5419/1A-2018 "WIRE@ THERMOCOUPLE@ HIGH TEMPERATURE AND FIRE RESISTANT LIGHT WEIGHT@ SMALL DIAMETER NICKEL/CHROMIUM (KP); NICKEL/ ALUMINUM/MANGANESE (KN) THERMOCOUPLE EXTENSION@ 260 °C,"

PL-PKN, small thermal analysis

PN B10024-1968 Masonry ot little celIslar autoclaved concre?e blocks Specifications and accep?ance tes?s

Japanese Industrial Standards Committee (JISC), small thermal analysis

JIS K 6231-2:2007 Rubber -- Analysis by pyrolytic gas-chromatographic methods -- Part 2: Determination of styrene, butadiene, isoprene ratio