ZH

RU

ES

Suction principle

Suction principle, Total:115 items.

In the international standard classification, Suction principle involves: Water quality, Nuclear energy engineering, Analytical chemistry, Metalliferous minerals, Medical sciences and health care facilities in general, Linear and angular measurements, Leather technology, Paper and board, Non-destructive testing, Applications of information technology, Wastes, Electronic tubes, Soil quality. Pedology, Optical equipment, Optics and optical measurements, Technical drawings, Particle size analysis. Sieving, Protection against crime, Medical equipment, Test conditions and procedures in general, Measurement of volume, mass, density, viscosity, Construction industry, Aids for disabled or handicapped persons, Cereals, pulses and derived products, Products of the chemical industry, Environmental testing, Mechanical testing, Lubricants, industrial oils and related products.


Indonesia Standards, Suction principle

  • SNI 06-6596-2001 Water treatment for metal analysis by atomic absorption spectrophotometers
  • SNI 12-7181-2006 Test methods of total chromium content in leather by atomic absorption spectrophotometers (AAS)
  • SNI 06-6989.54-2005 Water and waste water - Part 54: Test methods of arsenic (As) content with atomic absorption spectrophotometers (AAS) by carbon stoves
  • SNI 06-6989.39-2005 Water and wastewater - Part 39: Test methods of barium (Ba) content by atomic absorption spectrophotometers (AAS)
  • SNI 06-6989.56-2005 Water and waste water - Part 56: Test methods of calcium (Ca) content by atomic absorption spectrophotometers
  • SNI 06-6989.43-2005 Water and wastewater - Part 43: Test methods of zinc (Zn) content with atomic absorption spectrophotometers (AAS) by extraction
  • SNI 06-6989.41-2005 Water and waste water - Part 41: Test methods of manganese (Mn) content with atomic absorption spectrophotometers (AAS) by extraction
  • SNI 06-6989.55-2005 Water and waste water - Part 55: Test methods of magnesium (Mg) content by atomic absorption spectrophotometers (AAS)
  • SNI 06-6992.7-2004 Sediment - Part 7: Test methods of manganese (Mn) with acid destruction by atomic absorption spectrophotometers (AAS)
  • SNI 06-6992.8-2004 Sediment - Part 8: Test methods of zinc (Zn) with acid destruction by atomic absorption spectrophotometers (AAS)
  • SNI 06-6989.37-2005 Water and waste water - Part 37: Test methods of cadmium (Cd) content with atomic absorption spectrophotometers (AAS) by extraction
  • SNI 06-6989.49-2005 Water and waste water - Part 49: Test methods of iron (Fe) content with atomic absorption spectrophotometers (AAS) by extraction
  • SNI 06-6989.47-2005 Water and wastewater - Part 47: Test methods of nickel (Ni) content with atomic absorption spectrophotometers (AAS) by extraction
  • SNI 06-6989.52-2005 Water and waste water - Part 52: Test methods of nitrogen organic content by macro Kjeldahl and titration
  • SNI 06-6989.38-2005 Water and waste water - Part 38: Test methods of cadmium (Cd) content with atomic absorption spectrophotometers (AAS) by carbon stoves
  • SNI 06-6989.48-2005 Water and waste water - Part 48: Test methods of nickel (Ni) content with atomic absorption spectrophotometers (AAS) by carbon stoves
  • SNI 06-6989.50-2005 Water and waste water - Part 50: Test methods of iron (Fe) content by atomic absorption spectrophotometers (AAS) with carbon stoves
  • SNI 06-6989.40-2005 Water and waste water - Part 40: Test methods of barium (Ba) content with atomic absorption spectrophotometers (AAS) by carbon stoves

Association Francaise de Normalisation, Suction principle

  • NF EN ISO 23131:2022 Ellipsométrie - Principes
  • NF S10-041*NF ISO 9335:2013 Optics and photonics - Optical transfer function - Principles and procedures of measurementt
  • NF B35-300*NF EN ISO 384:2016 Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments
  • NF EN ISO 384:2016 Matériels de laboratoire en verre ou en plastique - Principes de conception et de construction d'instruments volumétriques
  • NF EN ISO 23674:2022 Cosmétiques - Méthodes d'analyse - Dosage direct des traces de mercure dans les cosmétiques par décomposition thermique et spectrométrie d'absorption atomique (analyseur de mercure)
  • NF S96-632*NF EN ISO 16021:2001 Urine-absorbing aids - Basic principles for evaluation of single-use adult-incontinence-absorbing aids from the perspective of users and caregivers.
  • NF EN 61947-1:2004 Projection électronique - Mesure et documentation des critères principaux de performance - Partie 1 : projecteurs à résolution fixe

German Institute for Standardization, Suction principle

  • DIN EN ISO 23131:2023-01 Ellipsometry - Principles (ISO 23131:2021); German version EN ISO 23131:2022
  • DIN EN ISO 23131:2023 Ellipsometry - Principles (ISO 23131:2021)
  • DIN 2271-1:1976 Pneumatic Length Measurement (Air Gauging); Principles, Methods
  • DIN 50989-1:2018 Ellipsometry - Part 1: Principles; Text in German and English
  • DIN 66136-1:2022-12 Determination of the degree of dispersion of metals using chemisorption - Part 1: Principles / Note: Date of issue 2022-11-18*Intended as replacement for DIN 66136-1 (2017-02).
  • DIN 12790:1979 Laboratory glassware; hydrometers, principles of construction and adjustment
  • DIN ISO 9335:2008 Optics and photonics - Optical transfer function - Principles and procedures of measurement (ISO 9335:1995+Cor. 1:2005);English version of DIN ISO 9335:2008-04
  • DIN 66135-1:2001 Particle characterization - Micropore analysis by gas adsorption - Part 1: Fundamentals and testing procedure
  • DIN 66136-1:2017-02 Determination of the dispersion degree of metals using gas chemisorption - Part 1: Principles / Note: To be replaced by DIN 66136-1 (2022-12).
  • DIN EN ISO 384:2016-05 Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments (ISO 384:2015); German version EN ISO 384:2015
  • DIN 51350-1:2015-03 Testing of lubricants - Testing in the four-ball tester - Part 1: General working principles
  • DIN 66136-1:2017 Determination of the dispersion degree of metals using gas chemisorption - Part 1: Principles
  • DIN 66136-1:2004 Determination of the dispersion degree of metals using gas chemisorption - Part 1: Principles
  • DIN ISO 9335:2015 Optics and photonics - Optical transfer function - Principles and procedures of measurement (ISO 9335:2012)
  • DIN EN ISO 16021:2001-02 Urine absorbing aids - Basic principles for evaluation of single-use adult-incontinence-absorbing aids from the perspective of users and caregivers (ISO 16021:2000); German version EN ISO 16021:2000
  • DIN 51350-1:2010 Testing of lubricants - Testing in the four-ball tester - Part 1: General working principles
  • DIN 51350-1:2015 Testing of lubricants - Testing in the four-ball tester - Part 1: General working principles

Professional Standard - Agriculture, Suction principle

National Metrological Verification Regulations of the People's Republic of China, Suction principle

  • JJG 679-1990 Verification Regulation of cold Atomic Absorption Analyzer of Mercury

ES-UNE, Suction principle

Korean Agency for Technology and Standards (KATS), Suction principle

  • KS C IEC 60231:2012 General principles of nuclear reactor instrumentation
  • KS C IEC 60231D-2012(2017) Fourth supplement:Principles of instrumentation for pressurized water reactors
  • KS C IEC 60231-2012(2022) General principles of nuclear reactor instrumentation
  • KS C IEC 60231D-2012(2022) Fourth supplement:Principles of instrumentation for pressurized water reactors
  • KS E ISO 15247:2012 Zinc sulfide concentrates-Determination of silver content-Acid dissolution and flame atomic absorption spectrometric method
  • KS C IEC 60231D:2012 Fourth supplement:Principles of instrumentation for pressurized water reactors
  • KS A 4054-2005 Radiographic image quality indicators for non-destructive testing-Principles and identification
  • KS B ISO 9335:2011 Optics and optical instruments-Optical transfer function-Principles and procedures of measurement
  • KS B ISO 9335-2016(2021) Optics and optical instruments-Optical transfer function-Principles and procedures of measurement
  • KS B ISO 9335:2016 Optics and optical instruments-Optical transfer function-Principles and procedures of measurement
  • KS C IEC 60231A-2012(2022) General principal of nuclear reactor instrumentation-First supplement to publication 60231(1967)
  • KS M 9102-1996 Water quality-Determination of total mercury by flameless atomic absorption spectrometry(Method after pretreatment with ultraviolet radiation)
  • KS L ISO 384:2021 Laboratory glass and plastics ware — Principles of design and construction of volumetric instruments
  • KS P ISO 17191:2011 Urine-absorbing aids for incontinence-Measurement of airborne respirable polyacrylate superabsorbent materials-Determination of dust in collection cassettes by sodium atomic absorption spectrometry
  • KS P ISO 16021:2021 Urine-absorbing aids — Basic principles for evaluation of single-use adult-incontinence absorbing aids from the perspective of users and caregivers

American Society for Testing and Materials (ASTM), Suction principle

  • ASTM E1770-95 Standard Practice for Optimization of Electrothermal Atomic Absorption Spectrometric Equipment
  • ASTM E1770-95(2006) Standard Practice for Optimization of Electrothermal Atomic Absorption Spectrometric Equipment
  • ASTM E1770-14 Standard Practice for Optimization of Electrothermal Atomic Absorption Spectrometric Equipment
  • ASTM E1812-96 Standard Practice for Optimization of Flame Atomic Absorption Spectrometric Equipment
  • ASTM E1770-19 Standard Practice for Optimization of Instrumentation for Graphite Furnace Atomic Absorption Spectrometry
  • ASTM D5802-95 Standard Test Method for Sorption of Bibulous Paper Products (Sorptive Rate and Capacity Using Gravimetric Principles)
  • ASTM D5802-95(2001) Standard Test Method for Sorption of Bibulous Paper Products (Sorptive Rate and Capacity Using Gravimetric Principles)

SE-SIS, Suction principle

  • SIS SS IEC 231:1983 Nuclear instrumentation - General principles of nuclear reactor instrumentation
  • SIS SEN 01 27 11-1968 Symbols for electrical diagrams Recording and reproducing apparatus and devices
  • SIS SS IEC 617-8:1986 Graphical symbols for diagrams - Measuring instruments, lamps and signalling devices

VN-TCVN, Suction principle

  • TCVN 6164-1996 Principles for the establishment of hierarchy schemes for measuring instruments

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Suction principle

  • GB 15977-1995 Diagnostic criteria and principles of management of schistosomiasis
  • GB/T 19267.5-2008 Physical and chemical examination of trace evidence in forensic sciences.Part 5:Atomic absorption spectrometry
  • GB/T 19267.5-2003 Physical and chemical examination of trace evidence in forensic sciences--Part 5: Atomic absorption spectrometry
  • GB/T 14614-2006 Wheat flour.Physical characteristics of doughs.Determination of water absorption and rheological properties using a farinograph

British Standards Institution (BSI), Suction principle

  • BS 4877:1972 Recommendations for general principles of nuclear reactor instrumentation
  • BS ISO 9335:1996 Optics and optical instruments - Optical transfer function - Principles and procedures of measurement
  • BS EN ISO 23674:2022 Cosmetics. Analytical methods. Direct determination of traces of mercury in cosmetics by thermal decomposition and atomic absorption spectrometry (mercury analyser)
  • BS EN ISO 16021:2001 Urine-absorbing aids - Basic principles for evaluation of single-use adult-incontinence-absorbing aids from the perspective of users and caregivers
  • BS EN ISO 5530-1:2014 Wheat flour. Physical characteristics of doughs. Determination of water absorption and rheological properties using a farinograph
  • BS 6068-2.42:1993 Water quality. Physical, chemical and biochemical methods. Determination of sodium and potassium: determination of sodium by atomic absorption spectrometry
  • BS 6068-2.43:1993 Water quality. Physical, chemical and biochemical methods. Determination of sodium and potassium: determination of potassium by atomic absorption spectrometry

Professional Standard - Public Safety Standards, Suction principle

  • GA 332.2-2001 The code of drug control information management Part 2:The codes of drug addiction's causes
  • GA 332.7-2001 The code of drug control information management Part 7:The codes of drug addicts variations causes

RO-ASRO, Suction principle

  • STAS 6472/5-1973 Building physics HYGROTERMICS Designing and implementat ion principles for ventilated roofing

Group Standards of the People's Republic of China, Suction principle

  • T/NAIA 0217-2023 Determination of Mercury Content in Waste Activated Carbon Solid Sample Injection-Cold Atomic Absorption Mercury Meter Method
  • T/BSPT 003-2018 Performance test method for fine particulate matter (PM2.5 )mass concentration measurement instruments based on light scattering principle

RU-GOST R, Suction principle

  • GOST 21107.0-1975 Gas discharge devices. Methods of measurement of electrical parameters. General principles
  • GOST 30546.2-1998 Seismic stability tests for machines, instruments and other industrial products. General guidance and test methods
  • GOST R ISO 16021-2015 Urine-absorbing aids. Basic principles for evaluation of single-use adult-incontinence-absorbing aids from the perspective of users and caregivers
  • GOST R 51404-1999 Wheat flour. Physical characteristics of doughs. Determination of water absorption and rheological properties using a farinograph

AT-ON, Suction principle

  • ONORM M 5875-2000 Equipment of municipal sewage treatment plants with in situ measuring instruments for process control
  • ONORM E 1008-1987 Graphical symbols jor diagrams; symbols for measuring Instruments, lamps and signalling devices
  • ONORM M 5871-1998 Equipment of drinking water treatment plants with in situ measuring instruments

International Organization for Standardization (ISO), Suction principle

  • ISO 9335:1995 Optics and optical instruments - Optical transfer function - Principles and procedures of measurement
  • ISO 9335:2012 Optics and photonics - Optical transfer function - Principles and procedures of measurement
  • ISO 8322-1:1989 Building construction; measuring instruments; procedures for determining accuracy in use; part 1: theory
  • ISO 16021:2000 Urine-absorbing aids - Basic principles for evaluation of single-use adult-incontinence-absorbing aids from the perspective of users and caregivers
  • ISO 17191:2004 Urine-absorbing aids for incontinence - Measurement of airborne respirable polyacrylate superabsorbent materials - Determination of dust in collection cassettes by sodium atomic absorption spectrometry

KR-KS, Suction principle

  • KS B ISO 9335-2016 Optics and optical instruments-Optical transfer function-Principles and procedures of measurement
  • KS L ISO 384-2021 Laboratory glass and plastics ware — Principles of design and construction of volumetric instruments
  • KS P ISO 16021-2021 Urine-absorbing aids — Basic principles for evaluation of single-use adult-incontinence absorbing aids from the perspective of users and caregivers

United States Navy, Suction principle

  • NAVY MS33741 NOTICE 2-1996 WIRING DIAGRAM - SENSITIVE INSTRUMENT SYSTEM WITH SEPARATE AMPLIFIER, 26 VOLTS, 400 CYCLES, SCHEMATIC
  • NAVY MS33741 VALID NOTICE 1-1991 WIRING DIAGRAM - SENSITIVE INSTRUMENT SYSTEM WITH SEPARATE AMPLIFIER, 26 VOLTS, 400 CYCLES, SCHEMATIC
  • NAVY MS33741-1960 WIRING DIAGRAM - SENSITIVE INSTRUMENT SYSTEM WITH SEPARATE AMPLIFIER, 26 VOLTS, 400 CYCLES, SCHEMATIC

Jiangsu Provincial Standard of the People's Republic of China, Suction principle

  • DB32/T 4227-2022 Safety management and quality control specifications for clinical use of high-flow respiratory humidification therapy equipment

CZ-CSN, Suction principle

  • CSN IEC 617-8:1993 Graphical symbols for diagrams. Part 8: Measuring instruments. lamps and signalling devices

Lithuanian Standards Office , Suction principle

  • LST EN ISO 16021:2002 Urine-absorbing aids - Basic principles for evaluation of single-use adult-incontinence-absorbing aids from the perspective of users and caregivers (ISO 16021:2000)

Danish Standards Foundation, Suction principle

  • DS/EN ISO 16021:2001 Urine-absorbing aids - Basic principles for evaluation of single-use adult-incontinence-absorbing aids from the perspective of users and caregivers

American Gas Association, Suction principle

  • AGA TOMS-2003 The Theory and Operations of Meter Shop Sonic Nozzle Proving Systems for the Natural Gas Industry

Professional Standard - Aviation, Suction principle

  • HB 6247.4-1989 Basic product drawing management system (instrument, electrical specialty) Numbering principles for design documents

未注明发布机构, Suction principle

  • ISO 9335:1995/Cor 1:2005 Optical and Optical Instruments Light Transfer Function Measurement Principles and Procedures Technical Corrigendum 1

European Committee for Standardization (CEN), Suction principle

  • EN ISO 16021:2000 Urine-Absorbing Aids - Basic Principles for Evaluation of Single-Use Adult-Incontinence-Absorbing Aids from the Perspective of Users and Caregivers ISO 16021: 2000

AENOR, Suction principle

  • UNE-EN ISO 16021:2001 Urine-absorbing aids - Basic principles for evaluation of single-use adult-incontinence-absorbing aids from the perspective of users and caregivers. (ISO 16021:2000)




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved