ZH
RU
ES

Laboratory Proficiency Verification Report

Laboratory Proficiency Verification Report, Total:404 items.

In the international standard classification, Laboratory Proficiency Verification Report involves: Quality, Medical sciences and health care facilities in general, Applications of information technology, Ground service and maintenance equipment, Tyres, Test conditions and procedures in general, Installations in buildings, Road vehicle systems, Air quality, Environmental protection, Occupational safety. Industrial hygiene, Diagnostic, maintenance and test equipment, Metrology and measurement in general, Laboratory medicine, Protection against fire, Water quality, Electrical and electronic testing, Equipment for the chemical industry, Analytical chemistry, Veterinary medicine, Farming and forestry, Electricity. Magnetism. Electrical and magnetic measurements, Linear and angular measurements, Mechanical testing, Biology. Botany. Zoology, Ventilators. Fans. Air-conditioners, Microbiology, Passenger cars. Caravans and light trailers, Acoustics and acoustic measurements, Cereals, pulses and derived products, Rubber, Radiation protection, Sterilization and disinfection, Radiation measurements, Earthworks. Excavations. Foundation construction. Underground works, Company organization and management, Environmental testing, Sports equipment and facilities, General methods of tests and analysis for food products, Products of the textile industry, Corrosion of metals, Electrical engineering in general, Animal feeding stuffs, Vibrations, shock and vibration measurements, Optics and optical measurements, Protection of and in buildings, Energy and heat transfer engineering in general, HEALTH CARE TECHNOLOGY, Aircraft and space vehicles in general, Optoelectronics. Laser equipment.

Professional Standard - Commodity Inspection, Laboratory Proficiency Verification Report

SN/T 2723.3-2010 Laboratory proficiency testing.Part 3: Format and content of proficiency testing report
SN/T 2723.1-2010 Laboratory proficiency testing.Part 1:General principles
SN/T 2966-2011 Proficiency testing regulations for plant quarantine
SN/T 2723.2-2010 Laboratory proficiency testing.Part 2:Terms and glossary
SN/T 2989-2011 Protocol on proficiency testing of entry-exit animal quarantine laboratories
SN/T 3782-2014 Rules for laboratory proficiency testing specification of manufacturing/marketing enterprises on import and export textiles
SN/T 3092-2012 Code for validation of the ability of lab replying to public safety affairs

中国国家认证认可监督管理委员会, Laboratory Proficiency Verification Report

RB/T 183-2017 Laboratory proficiency testing system table
RB/T 184-2017 Laboratory proficiency testing technical requirements for phytosanitary
RB/T 210-2017 Technical requirements for laboratory proficiency testing in the field of animal quarantine
RB/T 185-2017 Implementation guide for proficiency testing for visual assessment of color fastness of textiles
RB/T 209-2017 Implementation Guidelines for Proficiency Testing in the Field of Medical Vector Biological Testing

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Laboratory Proficiency Verification Report

GB/T 27409-2010 Application of proficiency testing in the medical laboratory
GB/T 15483.2-1999 Proficiency testing by interlaboratory comparisons--Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies
GB/T 15483.1-1999 Proficiency testing by interlaboratory comparisons--Part 1: Development and operation of proficiency testing schemes
GB/T 28043-2011 Statistical methods for use in proficiency testing by interlaboratory comparisons
GB/Z 30993-2014 Safety requirements for electrical equipment for measurement, control and laboratory use.Conformity verification report for GB 4793.1—2007
GB/Z 30249-2013 Safety requirements for electrical equipment for measurement,control, and laboratory use.Protocol for the preparation of conformity verfication reports for the GB 4793 series
GB/T 22274.3-2008 Good Laboratory Practice Guidelines for Supervising Authorities Part 3: Guidelines for the Preparation of Good Laboratory Practice Inspection Reports
GB/T 29479.2-2020 Mobile laboratory—Part 2: Competence requirements
GB/T 15481-2000 General requirements for the competence of testing and calibration laboratories
GB/T 22576-2008 Medical laboratories.Particular requirements for quality and competence
GB/T 27025-2008 General requirements for the competence of testing and calibration laboratories
GB/T 16510-2008 The requirements for the competence of a radiation processing dosimetry calibration laboratory
GB/T 16510-1996 The requirements for the competence of a radiation processing dosimetry calibration laboratory
GB/T 21919-2022 Laboratory medicine—Requirements for the competence of calibration laboratories using reference measurement procedures

Korean Agency for Technology and Standards (KATS), Laboratory Proficiency Verification Report

KS A ISO/IEC GUIDE 43-1-2002(2012) Proficiency testing by interlaboratory comparisons－Part 1：Development and operation of proficiency testing schemes by laboratory accreditation bodies
KS A ISO/IEC GUIDE 43-2-2002(2012) Proficiency testing by interlaboratory comparisons－Part 2：Selection and use of proficiency testing schemes by laboratory accreditation bodies
KS X 7503-2016 Health informatics－Laboratory report CDA
KS X 7503-2016(2021) Health informatics－Laboratory report CDA
KS X 7502-2010 Health informatics-Laboratory report messaging
KS X 7502-2016(2021) Health informatics－Laboratory report messaging
KS X 7502-2016 Health informatics－Laboratory report messaging
KS I ISO 14066-2016(2021) Greenhouse gases -- Competence requirements for greenhouse gas validation teams and verification teams
KS M ISO 10191-2012(2022) Passenger car tyres－Verifying tyre capabilities－Laboratory test methods
KS I ISO TS 20612:2019 Water quality — Interlaboratory comparisons for proficiency testing of analytical chemistry laboratories
KS P ISO 15189-2013(2019) Medical laboratories ─ Requirements for quality and competence
KS M ISO 10454-2007(2022) Truck and bus tyres－Verifying tyre capabilities－Laboratory test methods
KS P ISO 15189:2011 Medical laboratories-Particular requirements for quality and competence
KS P ISO 15189:2013 Medical laboratories ─ Requirements for quality and competence
KS Q ISO/IEC 17025:2006 General requirements for the competence of testing and calibration laboratories
KS Q ISO/IEC 17025:2019 General requirements for the competence of testing and calibration laboratories
KS Q ISO 13528-2017(2022) Statistical methods for use in proficiency testing by interlaboratory comparisons
KS B 6392-2013 Laboratory methods of testing air diffusers for aerodynamic performance
KS Q ISO 13528:2017 Statistical methods for use in proficiency testing by interlaboratory comparisons
KS P 2069-2020 Protocol for evaluation of detection capability for measurement procedures in in-vitro diagnostic medical laboratory
KS D ISO TR 17270:2007 Microbeam analysis－Analytical transmission electron microscopy－Technical report on the determination of the experimental parameters for electron energy loss spectroscopy

Sichuan Provincial Standard of the People's Republic of China, Laboratory Proficiency Verification Report

DB51/T 1202-2011 Specifications for proficiency testing of agricultural product inspection laboratories

AENOR, Laboratory Proficiency Verification Report

UNE 129001:1997 CLINICAL LABORATORY REPORTS. PREPARING REQUIREMENTS.
UNE-IEC/TR 61010-3:2006 IN Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3: Protocol for the preparation of conformity verification reports for the IEC 61010 2nd edition series .
UNE-CR 12739:2000 BIOTECHNOLOGY. LABORATOIRES FOR RESEARCH, DEVELOPMENT AND ANALYSIS. REPORT ON THE SELECTION OF EQUIPMENT NEEDED FOR BIOTECHNOLOGY LABORATORIES ACCORDING TO THE DEGREE OF HAZARD
UNE-CEN/TR 16324:2013 IN Technical report of the interlaboratory study for the determination of Besatz in common wheat, rye and durum wheat
UNE-ISO 14066:2012 Greenhouse gases. Competence requirements for greenhouse gas validation teams and verification teams.
UNE-IEC/TR 61010-3-1:2006 IN Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-1: Conformity verification report for IEC 61010-1:2001 - General requirements (IEC/TR 61010-3-1:2003)
UNE-EN ISO/IEC 17025:2005 Conformity assessment. General requirements for the competence of testing and calibration laboratories
UNE-EN ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2017)
UNE-CEN ISO/TS 22117:2011 EX Microbiology of food and animal feeding stuffs - Specific requirements and guidance for proficiency testing by interlaboratory comparison (ISO/TS 22117:2010)
UNE-EN ISO 15189:2013 Medical laboratories - Requirements for quality and competence (ISO 15189:2012, Corrected version 2014-08-15)

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Laboratory Proficiency Verification Report

ASHRAE RP-1133-2001 How to Verify@ Validate@ and Report Indoor Environment Modeling CFD Analyses
ASHRAE TO-98-15-1-1998 Experimental Validation of Thermal and Pressure Models in a Laboratory Simulator
ASHRAE 51-2016 Laboratory Methods of Testing Fans for Certified Aerodynamic Performance Rating
ASHRAE 51 INT 2-2000 Laboratory Methods of Testing Fans for Aerodynamic Performance Rating
ASHRAE 51 ERTA-2006 Laboratory Methods of Testing Fans for Aerodynamic Performance Rating
ASHRAE 51 INT 1-2000 Laboratory Methods of Testing Fans for Aerodynamic Performance Rating
ASHRAE 51 ADD A-2001 Laboratory Methods of Testing Fans for Aerodynamic Performance Rating

Association Francaise de Normalisation, Laboratory Proficiency Verification Report

NF X06-510*NF ISO 13528:2015 Statistical methods for use in proficiency testing by interlaboratory comparison
NF ISO 13528:2022 Méthodes statistiques utilisées dans les essais d'aptitude par comparaison interlaboratoires
FD S61-924*FD CEN/TR 14922:2005 Portable fire extinguisher - Model laboratory - Report in compliance with EN 3-7
NF U47-400:2014 Animal health analysis methods - Guide for the organisation of interlaboratory proficiency testing in animal health
NF EN ISO 22117:2019 Microbiologie de la chaîne alimentaire - Exigences spécifiques et recommandations relatives aux essais d'aptitude par comparaison interlaboratoires
NF R12-755*NF ISO 10191:2021 Passenger car tyres - Verifying tyre capabilities - Laboratory test methods
NF EN ISO 15189:2022 Laboratoires médicaux - Exigences concernant la qualité et la compétence
NF S92-062*NF EN ISO 15195:2019 Laboratory medicine - Requirements for the competence of calibration laboratories using reference measurement procedures
NF X50-061:2000 General requirements for the competence of testing and calibration laboratories.
FD X42-205*FD CR 12739:1999 Biotechnology. Laboratories for research, development and analysis. Report on the selection of equipment needed for biotechnology laboratories according to the degree of hazard.
FD CR 12739:1999 Biotechnologie - Laboratoires de recherche, développement et analyse - Rapport sur le choix des équipements nécessaires dans les laboratoires de biotechnologie en fonction du degré de danger.
NF S92-060*NF EN ISO 15189:2012 Medical laboratories - Requirements for quality and competence
NF V08-304*NF EN ISO 22117:2019 Microbiology of the food chain - Specific requirements and guidance for proficiency testing by interlaboratory comparison
NF S92-060:2007 Medical laboratories - Particular requirements for quality and competence.
NF X50-061*NF EN ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories.
NF X50-061*NF EN ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories
NF EN ISO/IEC 17025:2017 Exigences générales concernant la compétence des laboratoires d'étalonnages et d'essais
FD V03-756*FD CEN/TR 16324:2012 Technical Report of the interlaboratory study for the determination of Besatz in common wheat, rye and durum wheat
NF X30-366*NF ISO 14066:2011 Greenhouse gases - Competence requirements for greenhouse gas validation teams and verification teams.
NF ISO 14066:2011 Gaz à effet de serre - Exigences de compétence pour les équipes de validation et les équipes de vérification de gaz à effet de serre
FD V03-119*FD CEN/TR 16059:2011 Food analysis - Performance criteria for single laboratory validated of analysis for the determination of mycotoxins
XP CEN/TS 17455:2020 Aliments des animaux - Méthodes d'échantillonnage et d'analyse - Critères de performance des méthodes d'analyse des mycotoxines validées dans un seul laboratoire ou suite à un essai interlaboratoires
FD CEN/TR 16059:2011 Analyse des produits alimentaires - Critères de performance des méthodes validées monolaboratoires d'analyse des mycotoxines
XP V18-801*XP CEN/TS 17455:2020 Animal feeding stuffs - Methods of sampling and analysis - Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of mycotoxins
XP V18-800*XP CEN/TS 17174:2018 Animal feeding stuffs: Methods of sampling and analysis - Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of heavy metals
NF S31-050:1979 Acoustics. Measurement of the acoustic insulation of building and building components. Specifications relating to laboratories.
NF EN 17542-1:2022 Terrassements - Essais géotechniques en laboratoire - Partie 1 : Essai de dégradabilité
FD CEN/TR 16324:2012 Rapport technique relatif à l'essai interlaboratoires portant sur la détermination du pourcentage d'impuretés dans le blé tendre, le seigle et le blé dur
NF S31-620-1*NF EN ISO 11546-1:2009 Acoustics - Determination of sound insulation performances of enclosures - Part 1 : measurements under laboratory conditions (for declaration purposes)
NF S31-620-1:1996 Acoustics. Determination of sound insulation performances of enclosures. Part 1 : measurements under laboratory conditions (for declaration purposes).
FD V03-769*FD CEN/TR 17474:2021 Cereals (wheat and barley) - Technical Report of the interlaboratory studies for the determination of moisture and protein in whole kernels by near infrared spectroscopy
FD V30-750*FD CEN/TR 16875:2015 Cereal and cereal products - Technical report of the interlaboratory study for the determination of impurities content in maize (Zea mays, L.) and sorghum (Sorghum bicolor, L.)
FD CEN/TR 16875:2015 Céréales et produits céréaliers - Rapport technique de l'étude interlaboratoires pour la détermination de la teneur en impuretés dans le maïs (Zea mays, L.) et le sorgho (Sorghum bicolor, L.)

TH-TISI, Laboratory Proficiency Verification Report

TIS 5043.1-1997 Proficiency testing by interlaboratory comparisons.part 1: development and operation of proficiency testing schemes
TIS 5043.2-1997 Proficiency testing by interlaboratory comparisons.part 2: selection and use of proficiency testing schemes by laboratory accreditation bodies
TIS 2154-2004 Medical laboratories.particular requirements for quality and competence
TIS 17025-2005 General requirements for the competence of testing and calibration laboratories
TIS 1300-1994 General requirements for teh competence of calibration and testing laboratories

International Organization for Standardization (ISO), Laboratory Proficiency Verification Report

ISO/IEC Guide 43-1:1997 Proficiency testing by interlaboratory comparisons - Part 1: Development and operation of proficiency testing schemes
ISO/IEC Guide 43-2:1997 Proficiency testing by interlaboratory comparisons - Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies
ISO 13528:2022 Statistical methods for use in proficiency testing by interlaboratory comparison
ISO 10191:2021 Passenger car tyres — Verifying tyre capabilities — Laboratory test methods
ISO 14066:2011 Greenhouse gases - Competence requirements for greenhouse gas validation teams and verification teams
ISO 15195:2018 Laboratory medicine — Requirements for the competence of calibration laboratories using reference measurement procedures
ISO/IEC GUIDE 25:1990 General requirements for the competence of calibration and testing laboratories
ISO/IEC 17025:1999 General requirements for the competence of testing and calibration laboratories
ISO 15189:2007 Medical laboratories - Particular requirements for quality and competence
ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
ISO 15189:2022 Medical laboratories — Particular requirements for quality and competence
ISO 13507:2012 Rubber compounds, raw rubbers and compounding materials - Short terms for properties reported in certificates of analysis
ISO/IEC 17025:2005/Cor 1:2006 General requirements for the competence of testing and calibration laboratories; Technical Corrigendum 1
ISO/FDIS 14066 Environmental information — Competence requirements for teams validating and verifying environmental information
ISO 14066:2023 Environmental information — Competence requirements for teams validating and verifying environmental information

BELST, Laboratory Proficiency Verification Report

STB 941.3-93 System of accreditation of verification ant testing laboratory of Belarus. General requirements for estimation of technical competence verification and testing laboratory
STB 2542-2019 Special requirements for the application of STB ISO/IEC 17025-2007 for the evaluation of competence of laboratories performing verifications of measuring instruments

Professional Standard - Civil Aviation, Laboratory Proficiency Verification Report

MH/T 6096-2013 Proficiency testing procedures for commercial aviation oil testing laboratory

US-FCR, Laboratory Proficiency Verification Report

FCR COE ER 1110-1-8101-1970 REPORTS OF PERTINENT ACTIVITIES AT DIVISION LABORATORIES (REPORTS CONTROL SYMBOL ENGCW-E- 3(R1))
FCR COE HL-92-7 REPORT 3-1995 HOUSTON-GALVESTON NAVIGATION CHANNELS, TEXAS PROJECT; REPORT 3: THREE-DIMENSIONAL HYDRODYNAMIC MODEL VERIFICATION

API - American Petroleum Institute, Laboratory Proficiency Verification Report

API PUBL 4694-1999 Laboratory Analysis of Petroleum Industry Wastewaters Arranging for Analysis and Understanding Laboratory Reports
API DR169-1984 Final Report Interlaboratory Testing: Acute Toxicity Bioassay Method for Chemically-Dispersed Oils

Danish Standards Foundation, Laboratory Proficiency Verification Report

DS/ISO 13528:2005 Statistical methods for use in proficiency testing by interlaboratory comparisons
DS/CEN/TR 14922:2005 Portable fire extinguishers - Model laboratory - Report in compliance with EN 3-7
DS/IEC/TR 61010-3-020:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-020: Conformity verification report for IEC 61010-2-020:1992, Particular requirements for laboratory centrifuges
DS/IEC/TR 61010-3-010:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-010: Conformity verification report for IEC 61010-2-010, Particular requirements for laboratory equipment for the heating of materials
DS/IEC/TR 61010-3-061:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-061: Conformity verification report for IEC 61010-2-061, Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
DS/EN ISO 15189:2013 Medical laboratories - Requirements for quality and competence
DS/IEC/TR 61010-3-051:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-051: Conformity verification report for IEC 61010-2-051, Particular requirements for laboratory equipment for mixing and stirring
DS/CEN/CR 12739:1999 Biotechnology - Laboratories for research, development and analysis - Report on the selection of equipment needed for biotechnology laboratories according to the degree of hazard
DS/CEN ISO/TS 22117:2011 Microbiology of food and animal feeding stuffs – Specific requirements and guidance for proficiency testing by interlaboratory comparison
DS/IEC/TR 61010-3:2004 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3: Protocol for the preparation of conformity verification reports for the IEC 61010 2nd edition series
DS/EN ISO 15189:2008 Medical laboratories - Particular requirements for quality and competence
DS/EN ISO/IEC 17025/AC:2006 General requirements for the competence of testing and calibration laboratories
DS/EN ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
DS/CEN/TR 16324:2012 Technical report of the interlaboratory study for the determination of Besatz in common wheat, rye and durum wheat
DS/ISO 14066:2011 Greenhouse gases - Competence requirements for greenhouse gas validation teams and verification teams
DS/CEN/TR 16059:2011 Food analysis - Performance criteria for single laboratory validated methods of analysis for the determination of mycotoxins
DS/CEN/TR 17474:2020 Cereals (wheat and barley) – Technical Report of the interlaboratory studies for the determination of moisture and protein in whole kernels by near infrared spectroscopy
DS/IEC/TR 61010-3-045:2004 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-045: Conformity verification report for IEC 61010- 2-045:2000 - Particular requirements for washer disinfectors used in medical, pharmaceutical, veterinary
DS/IEC/TR 61010-3-031:2005 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-031: Conformity verification report for IEC 61010-031:2002 - Safety requirements for hand-held probe assemblies for electrical test and measurement
DS/IEC/TR 61010-3-043:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-043: Conformity verification report for IEC 61010-2-043:1997, Particular requirements for dry heat sterilizers using either hot air or hot inert gas for the

ZA-SANS, Laboratory Proficiency Verification Report

SANS 13528:2009 Statistical methods for use in proficiency testing by interlaboratory comparisons
SANS 15189:2009 Medical laboratories - Particular requirements for quality and competence

British Standards Institution (BSI), Laboratory Proficiency Verification Report

BS ISO 13528:2022 Statistical methods for use in proficiency testing by interlaboratory comparison
BS 6460-1:1983 Accreditation of testing laboratories - Specification of the general requirements for the technical competence of testing laboratories
BS IEC 61010-3:1997 Safety requirements for electrical equipment for measurement, control, and laboratory use - Protocol for the preparation of conformity verification reports for the IEC 61010 series
BS EN ISO 15189:2022 Medical laboratories. Requirements for quality and competence
20/30397485 DC BS ISO 10191. Passenger car tyres. Verifying tyre capabilities. Laboratory test methods
BS EN ISO 22117:2019 Tracked Changes. Microbiology of the food chain. Specific requirements and guidance for proficiency testing by interlaboratory comparison
BS ISO 10191:2021 Tracked Changes. Passenger car tyres. Verifying tyre capabilities. Laboratory test methods
BS EN ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories
BS EN ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
BS EN ISO 11546-1:2010 Acoustics. Determination of sound insulation performances of enclosures. Measurements under laboratory conditions (for declaration purposes)
BS EN ISO 11546-1:2009 Acoustics - Determination of sound insulation performances of enclosures - Measurements under laboratory conditions (for declaration purposes)
21/30386856 DC BS EN ISO 15189. Medical laboratories. Requirements for quality and competence
BS IEC 61010-3-020:1999 Safety requirements for electrical equipment for measurement, control, and laboratory use - Conformity verification report for IEC 61010-2-020:1992, particular requirements for laboratory centrifuges
PD IEC TR 61010-3-043:2002 Safety requirements for electrical equipment for measurement, control, and laboratory use. Conformity verification report for IEC 61010-2-043:1997. Particular requirements for dry heat sterilizers using either hot air or hot inert gas for treatment of med
PD IEC TR 61010-3-041:2002 Safety requirements for electrical equipment for measurement, control, and laboratory use. Conformity verification report for IEC 61010-2-041:1995. Particular requirements for autoclaves using steam for the treatment of medical materials, and for laborato
BS IEC 61010-3-051:1999 Safety requirements for electrical equipment for measurement, control, and laboratory use - Conformity verification report for IEC 61010-2-051, particular requirements for laboratory equipment for mixing and stirring
PD IEC TR 61010-3-032:2002 Safety requirements for electrical equipment for measurement, control, and laboratory use. Conformity verification report for IEC 61010-2-032:1994. Particular requirements for hand-held current clamps for electrical measurement and test
PD 6537-1-1993 Variability of methods of test for textiles and reports of interlaboratory trials on certain methods. Phase 1: BS 2576, BS 4303 and ISO 9290
BS IEC 61010-3-010:1999 Safety requirements for electrical equipment for measurement, control, and laboratory use - Conformity verification report for IEC 61010-2-010, particular requirements for laboratory equipment for the heating of materials
BS PD CEN/TS 17174:2018 Animal feeding stuffs: Methods of sampling and analysis. Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of heavy metals
PD 6537-1:1993 Variability of methods of test for textiles and reports of interlaboratory trials on certain methods. Phase 1: BS 2576, BS 4303 and ISO 9290
PD CEN/TS 17455:2020 Animal feeding stuffs. Methods of sampling and analysis. Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of mycotoxins
PD 6537-2:1994 Variability of methods of test for textiles and reports of inter-laboratory trials on certain methods.. Phase 2. BS 3320, BS 2010 and BS 1932
BS ISO 14066:2023 Environmental information. Competence requirements for teams validating and verifying environmental information
BS IEC 61010-3-061:1999 Safety requirements for electrical equipment for measurement, control, and laboratory use - Conformity verification report for IEC 61010-2-061, particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
BS EN ISO 15195:2019 Tracked Changes. Laboratory medicine. Requirements for the competence of calibration laboratories using reference measurement procedures
BS PD CEN/TR 16875:2015 Cereal and cereal products. Technical report of the interlaboratory study for the determination of impurities content in maize (Zea mays, L.) and sorghum (Sorghum bicolor, L.)
BS ISO 27327-1:2010 Fans. Air curtain units. Laboratory methods of testing for aerodynamic performance rating
BS ISO 27327-1:2009 Fans - Air curtain units - Laboratory methods of testing for aerodynamic performance rating

German Institute for Standardization, Laboratory Proficiency Verification Report

DIN ISO 13528:2020-09 Statistical methods for use in proficiency testing by interlaboratory comparison (ISO 13528:2015, Corrected version 2016-10-15); Text in German and English
DIN EN ISO 22117:2019-08 Microbiology of the food chain - Specific requirements and guidance for proficiency testing by interlaboratory comparison (ISO 22117:2019); German version EN ISO 22117:2019
DIN 38402-45:2014-06 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 45: Interlaboratory comparisons for proficiency testing of laboratories (A 45)
DIN EN ISO 15189:2023-03 Medical laboratories - Requirements for quality and competence (ISO 15189:2022); German version EN ISO 15189:2022
DIN ISO 13528:2020 Statistical methods for use in proficiency testing by interlaboratory comparison (ISO 13528:2015, Corrected version 2016-10-15); Text in German and English
DIN EN ISO 15195:2019 Laboratory medicine - Requirements for the competence of calibration laboratories using reference measurement procedures (ISO 15195:2018)
DIN EN ISO 15195:2019-07 Laboratory medicine - Requirements for the competence of calibration laboratories using reference measurement procedures (ISO 15195:2018); German version EN ISO 15195:2019
DIN EN ISO 15189:2023 Medical laboratories - Requirements for quality and competence (ISO 15189:2022)
DIN EN ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2005); German and English version EN ISO/IEC 17025:2005
DIN EN ISO/IEC 17025:2018-03 General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2017); German and English version EN ISO/IEC 17025:2017
DIN EN ISO 22117:2019 Microbiology of the food chain - Specific requirements and guidance for proficiency testing by interlaboratory comparison (ISO 22117:2019)
DIN CEN/TR 16324:2012-11*DIN SPEC 10624:2012-11 Technical report of the interlaboratory study for the determination of Besatz in common wheat, rye and durum wheat; German version CEN/TR 16324:2012
DIN EN ISO/IEC 17025:2018 General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2017); German and English version EN ISO/IEC 17025:2017
DIN 45688:2005 Specific requirements for the competence of testing laboratories for noise and vibration in the field of immission control
DIN 45688:2014 Specific requirements for the competence of testing laboratories for noise and vibration in the field of immission control
DIN CEN/TS 17174:2018-10*DIN SPEC 10796:2018-10 Animal feeding stuffs: Methods of sampling and analysis - Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of heavy metals; German version CEN/TS 17174:2018
DIN CEN/TS 17455:2020-07 Animal feeding stuffs - Methods of sampling and analysis - Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of mycotoxins; German version CEN/TS 17455:2020
DIN 50905-4:2018-03 Corrosion of metals - Corrosion testing - Part 4: Performance of chemical corrosion experiments without mechanical stresses in liquids in the laboratory
DIN 45688:2014-07 Specific requirements for the competence of testing laboratories for noise and vibration in the field of immission control

国家质量监督检验检疫总局, Laboratory Proficiency Verification Report

SN/T 4754-2017 Technical requirements for chemical testing proficiency verification in entry-exit laboratories
SN/T 4610-2016 Requirements for building testing capacity of health and quarantine laboratories for entry-exit special items

RU-GOST R, Laboratory Proficiency Verification Report

GOST R 50779.60-2017 Statistical methods for use in proficiency testing by interlaboratory comparison
GOST R ISO 14066-2013 Greenhouse gases. Competence requirements for greenhouse gas validation teams and verification team
GOST 31900-2012 Principles of Good Laboratory Practice (GLP). Guidance for the preparation of GLP inspection reports
GOST R 8.692-2009 State system for ensuring the uniformity of measurements. Requirements for the competence of providers of proficiency testing for test laboratories by interlaboratory comparisons
GOST ISO 10454-2013 Truck and bus tyres. Verifying tyres capabilities. Laboratory test methods
GOST R ISO 13528-2010 Statistical methods. Using in proficiency testing by interlaboratory comparison tests
GOST R ISO 15189-2006 Medical laboratories. Particular requirements for quality and competence
GOST R ISO 15189-2015 Medical laboratories. Particular requirements for quality and competence
GOST R ISO/IEC 17025-2000 General requirements for the competence of testing and calibration laboratories
GOST R ISO/IEC 17025-2006 General requirements for the competence of testing and calibration laboratories
GOST R 54082-2010 Requirements for performance of chambers for industrial products environmental endurance tests. Data processing methods for chamber certification (calibration)
GOST R 55001-2012 General requirements for performance of chambers for industrial products environments endurance tests. Certification methods for chambers (without load) for salt spray tests
GOST R 54083-2010 General requirements for performance of chambers for industrial products environments endurance tests. Certification methods for chambers (with load) for temperature resistance test
GOST 31298.1-2005 Noise of machines. Determination of sound insulation performances of enclosures. Part 1. Measurements under laboratory conditions for declaration of noise performans values
GOST ISO/TS 22117-2013 Microbiology of food and animal feeding stuffs. Specific requirements and guidance for proficiency testing by interlaboratory comparison

American Society of Mechanical Engineers (ASME), Laboratory Proficiency Verification Report

ASME HLW-8-2013 Manufacturer's Master Data Proof Test Report For Water Heaters Or Storage Tanks

Society of Automotive Engineers (SAE), Laboratory Proficiency Verification Report

SAE J994-2009 Alarm Backup Electric Laboratory Performance Testing
SAE J994-2003 Alarm Backup Electric Laboratory Performance Testing
SAE J1107-1975 Laboratory Testing Machines for Measuring the Steady State Force and Moment Properties of Passenger Car Tires, Information Report January 1975
SAE J994-2023 Alarm - Backup - Electric Laboratory Performance Testing
SAE AIR5747-2008 EMC Laboratory RF Radiated Emission Report for Passive Radio Frequency Identification (RFID) Tags
SAE AIR5747A-2020 EMC Laboratory RF Radiated Emission Report for Passive Radio Frequency Identification (RFID) Tags
SAE J1563-1993 (R) Guidelines for Laboratory Cyclic Corrosion Test Procedures for Painted Automotive Parts, Information Report October 1993

国家市场监督管理总局、中国国家标准化管理委员会, Laboratory Proficiency Verification Report

GB/T 28043-2019 Statistical methods for use in proficiency testing by interlaboratory comparison
GB/T 27025-2019 General requirements for the competence of testing and calibration laboratories
GB/T 22576.3-2021 Medical laboratories—Requirements for quality and competence—Part 3: Requirements in the field of urine examination
GB/T 22576.1-2018 Medical laboratories—Requirements for quality and competence—Part 1: General requirements
GB/T 22576.4-2021 Medical laboratories—Requirements for quality and competence—Part 4: Requirements in the field of clinical chemistry examination
GB/T 22576.2-2021 Medical laboratories—Requirements for quality and competence—Part 2: Requirements in the field of clinical hematological examination
GB/T 22576.5-2021 Medical laboratories—Requirements for quality and competence—Part 5: Requirements in the field of clinical immunology examination
GB/T 22576.6-2021 Medical laboratories—Requirements for quality and competence—Part 6: Requirements in the field of clinical microbiological examination

International Committee for Information Technology Standards (INCITS), Laboratory Proficiency Verification Report

INCITS TR-45-2009 INCITS Technical Report for Information Technology - Biometric Performance Testing and Reporting - Part 7: Framework for Testing Methodologies for Specific Modalities

未注明发布机构, Laboratory Proficiency Verification Report

GJB 15481-2001 General requirements for competence of testing and calibration laboratories
SAE AIR5747-2020 EMC Laboratory RF Radiated Emission Report for Passive Radio Frequency Identification (RFID) Tags
BS IEC 61010-3:1997(2000) Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 3 : Protocol for the preparation of conformity verification reports for the IEC 61010 series
BS EN ISO/IEC 17025:2017(2018) General requirements for the competence of testing and calibration laboratories
DIN EN ISO 17025:2005 General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2005)

European Committee for Standardization (CEN), Laboratory Proficiency Verification Report

CEN/TR 14922:2004 Portable fire extinguishers - Model laboratory - Report in compliance with EN 3-7
PD CEN/TR 14922:2004 Portable fire extinguishers - Model laboratory - Report in compliance with EN 3-7
EN ISO/IEC 17025:2000 General Requirements for the Competence of Testing and Calibration Laboratories ISO/IEC 17025: 1999
EN ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories
prEN ISO 15189:2021 Medical laboratories - Requirements for quality and competence (ISO/DIS 15189:2021)
CEN ISO/TS 22117:2010 Microbiology of food and animal feeding stuffs - Specific requirements and guidance for proficiency testing by interlaboratory comparison (ISO/TS 22117:2010)
PD CEN/TR 16324:2012 Technical report of the interlaboratory study for the determination of Besatz in common wheat@ rye and durum wheat
EN ISO 11546-1:2009 Acoustics - Determination of sound insulation performances of enclosures - Part 1: Measurements under laboratory conditions (for declaration purposes)
CEN/TR 16059:2010 Food analysis - Performance criteria for single laboratory validated methods of analysis for the determination of mycotoxins
CEN/TS 17174:2018 Animal feeding stuffs: Methods of sampling and analysis - Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of heavy metals
PD CEN/TS 17174:2018 Animal feeding stuffs: Methods of sampling and analysis - Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of heavy metals
EN ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2005)
PD CEN/TR 16875:2015 Cereal and cereal products - Technical report of the interlaboratory study for the determination of impurities content in maize (Zea mays, L.) and sorghum (Sorghum bicolor, L.)
EN ISO 11546-1:1995 Acoustics - Determination of Sound Insulation Performances of Enclosures - Part 1: Measurements under Laboratory Conditions (for Declaration Purposes) (ISO 11546-1: 1995)
CEN/TR 17474:2020 Cereals (wheat and barley) - Technical Report of the interlaboratory studies for the determination of moisture and protein in whole kernels by near infrared spectroscopy
CEN/TR 16875:2015 Cereal and cereal products - Technical report of the interlaboratory study for the determination of impurities content in maize (Zea mays, L.) and sorghum (Sorghum bicolor, L.)
PD CEN/TR 17474:2020 Cereals (wheat and barley) - Technical Report of the interlaboratory studies for the determination of moisture and protein in whole kernels by near infrared spectroscopy

KR-KS, Laboratory Proficiency Verification Report

KS I ISO 14066-2016 Greenhouse gases -- Competence requirements for greenhouse gas validation teams and verification teams
KS I ISO TS 20612-2019 Water quality — Interlaboratory comparisons for proficiency testing of analytical chemistry laboratories
KS Q ISO/IEC 17025-2019 General requirements for the competence of testing and calibration laboratories
KS Q ISO 13528-2017 Statistical methods for use in proficiency testing by interlaboratory comparisons
KS D ISO TR 17270-2007 Microbeam analysis－Analytical transmission electron microscopy－Technical report on the determination of the experimental parameters for electron energy loss spectroscopy

American Society for Testing and Materials (ASTM), Laboratory Proficiency Verification Report

ASTM E1246-88(1995) Standard Practice for Reporting Reliability of Clinical Laboratory Computer Systems
ASTM E1246-01 Standard Practice for Reporting Reliability of Clinical Laboratory Computer Systems
ASTM F3539-22 Standard Practice for Creation of Walkway Tribometer Interlaboratory Study Reports and Test Procedures
ASTM C1893-23 Standard Practice for Laboratory Performance Verification of Hydrodynamic Separators for the Treatment of Stormwater Runoff
ASTM G117-98 Standard Guide for Calculating and Reporting Measures of Precision Using Data from Interlaboratory Wear or Erosion Tests
ASTM E2489-21 Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs
ASTM G117-02(2007) Standard Guide for Calculating and Reporting Measures of Precision Using Data from Interlaboratory Wear or Erosion Tests
ASTM G117-02 Standard Guide for Calculating and Reporting Measures of Precision Using Data from Interlaboratory Wear or Erosion Tests
ASTM E2489-11 Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs
ASTM ANS/ISO 17025-99 General requirements for the competence of testing and calibration laboratories
ASTM ANS/ISO 17025-05 General Requirements for the Competence of Testing and Calibration Laboratories
ASTM ANS/ISO17025-05 General Requirements for the Competence of Testing and Calibration Laboratories
ASTM ANS/ISO17025-99 General requirements for the competence of testing and calibration laboratories
ASTM G117-13 Standard Guide for Calculating and Reporting Measures of Precision Using Data from Interlaboratory Wear or Erosion Tests
ASTM E2709-14e1 Standard Practice for Demonstrating Capability to Comply with an Acceptance Procedure
ASTM E2709-12 Standard Practice for Demonstrating Capability to Comply with an Acceptance Procedure
ASTM D7401-08 Standard Test Methods for Laboratory Determination of Rock Anchor Capacities by Pull and Drop Tests
ASTM E2709-19 Standard Practice for Demonstrating Capability to Comply with an Acceptance Procedure
ASTM E2709-19(2023) Standard Practice for Demonstrating Capability to Comply with an Acceptance Procedure
ASTM E2709-23 Standard Practice for Demonstrating Capability to Comply with an Acceptance Procedure
ASTM D6122-19b Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
ASTM D6122-18 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
ASTM D6122-19 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
ASTM D6122-19a Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
ASTM E2093-00 Standard Guide for Optimizing, Controlling and Reporting Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization
ASTM E2093-05 Standard Guide for Optimizing, Controlling and Reporting Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization
ASTM D6689-01(2011) Standard Guide for Optimizing, Controlling and Reporting Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization
ASTM E2489-16 Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs
ASTM E2810-11e2 Standard Practice for Demonstrating Capability to Comply with the Test for Uniformity of Dosage Units
ASTM D6689-01(2019)e1 Standard Guide for Optimizing, Controlling, and Reporting Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization
ASTM F1364-03 Standard Practice for Use of a Calibration Device to Demonstrate the Inspection Capability of an Interferometric Laser Imaging Nondestructive Tire Inspection System
ASTM F1364-03(2010) Standard Practice for Use of a Calibration Device to Demonstrate the Inspection Capability of an Interferometric Laser Imaging Nondestructive Tire Inspection System

VN-TCVN, Laboratory Proficiency Verification Report

TCVN 7532-2005 Passenger car tyres.Verifying tyre capabilities.Laboratory test methods
TCVN 7533-2005 Truck and bus tyres.Verifying tyre capabilities.Laboratory test methods
TCVN 7782-2008 Medical laboratories.Particular requirements for quality and competence

International Electrotechnical Commission (IEC), Laboratory Proficiency Verification Report

IEC TR 61010-3-020:1999 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-020: Conformity verification report for IEC 61010-2-020:1992 - Particular requirements for laboratory centrifuges
IEC TR3 61010-3-1:1997 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-1: Conformity verification report for IEC 61010-1
IEC TR3 61010-3:1997 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3: Protocol for the preparation of conformity verification reports for the IEC 61010 series
IEC TR 61010-3-041:1999 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-041: Conformity verification report for IEC 61010-2-041:1995 - Particular requirements for autoclaves using steam for the treatment of medical materials, an
ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories
IEC TR 61010-3-042:1999 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-042: Conformity verification report for IEC 61010-2-042:1997 - Particular requirements for autoclaves and sterilizers using toxic gas for the treatment of m
IEC TR 61010-3-043:2001 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-043: Conformity verification report for IEC 61010-2-043:1997; Particular requirements for dry heat sterilizers using either hot air or hot inert gas for the
IEC TR 61010-3-031:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-031: Conformity verification report for IEC 61010-031:2002; Safety requirements for hand-held probe assemblies for electrical test and measurement
IEC TR 61010-3-032:2000 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-032: Conformity verification report for IEC 61010-2-032:1994 - Particular requirements for hand-held current clamps for electrical measurement and test
IEC TR3 61010-3-010:1999 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-010: Conformity verification report for IEC 61010-2-010, particular requirements for laboratory equipment for the heating of materials
IEC TR 61010-3-101:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-101: Conformity verification report for IEC 61010-2-101:2002; Particular requirements for in vitro diagnostic (IVD) medical equipment
IEC TR3 61010-3-051:1999 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-051: Conformity verification report for IEC 61010-2-051, particular requirements for laboratory equipment for mixing and stirring
IEC TR 61010-3-045:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-045: Conformity verification report for IEC 61010-2-045:2000; Particular requirements for washer disinfectors used in medical, pharmaceutical, veterinary an

National Association of Corrosion Engineers (NACE), Laboratory Proficiency Verification Report

NACE 5A195-1995 State-of-the-Art Report on Controlled-Flow Laboratory Corrosion Tests (Item No. 24187)

Taiwan Provincial Standard of the People's Republic of China, Laboratory Proficiency Verification Report

CNS 15009-2006 Proficiency testing by interlaboratory comparisons
CNS 13125-1992 Development and Operation of Laboratory Proficiency Testing
CNS 17025-2007 General requirements for the competence of testing and calibration laboratories
CNS 17025-2001 General requirements for the competence of testing and calibration laboratories

ES-UNE, Laboratory Proficiency Verification Report

UNE-EN ISO 22117:2020 Microbiology of the food chain - Specific requirements and guidance for proficiency testing by interlaboratory comparison (ISO 22117:2019)
UNE-EN ISO 15189:2023 Medical laboratories - Requirements for quality and competence (ISO 15189:2022)
UNE-EN ISO 15195:2019 Laboratory medicine - Requirements for the competence of calibration laboratories using reference measurement procedures (ISO 15195:2018)
UNE-CEN/TS 17455:2021 Animal feeding stuffs - Methods of sampling and analysis - Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of mycotoxins

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Laboratory Proficiency Verification Report

IEEE 548-1984 Standard Criteria and Guidelines for the Laboratory Measurement and Reporting of Fly Ash Resistivity

Institute of Electrical and Electronics Engineers (IEEE), Laboratory Proficiency Verification Report

IEEE Std 548-1984 IEEE Standard Criteria and Guidelines for the Laboratory Measurement and Reporting of Fly Ash Resistivity

Heilongjiang Provincial Standard of the People's Republic of China, Laboratory Proficiency Verification Report

DB23/T 3598-2023 Hemp Inspection and Testing Laboratory Personnel Competency Requirements

Standard Association of Australia （SAA）, Laboratory Proficiency Verification Report

AS ISO 15189:2013
AS ISO 15189:2023 Medical laboratories — Requirements for quality and competence
AS ISO 15189:2009
AS ISO/IEC 17025:2005/Amdt 1:2006
AS ISO/IEC 17025:2018 General requirements for the competence of testing and calibration laboratories
AS/NZS 4490:2011

Indonesia Standards, Laboratory Proficiency Verification Report

SNI ISO 15189:2012 Medical laboratories - Requirements for quality and competence
SNI ISO/IEC 17025:2008 General requirements for the competence of testing and calibration laboratories

IEC - International Electrotechnical Commission, Laboratory Proficiency Verification Report

IEC TR 61010-3-010:1999 Safety Requirements for Electrical Equipment for Measurement@ Control@ and Laboratory Use - Part 3-010: Conformity Verification Report for IEC 61010-2-010@ Particular Requirements for Laboratory Equipment for the Heating of Materials (Edition 1.0)
IEC TR 61010-3-1:1997 Safety Requirements for Electrical Equipment for Measurement@ Control@ and Laboratory Use - Part 3-1: Conformity Verification Report for IEC 61010-1 (Edition 1.0)
IEC TR 61010-3-051:1999 Safety Requirements for Electrical Equipment for Measurement@ Control@ and Laboratory Use - Part 3-051: Conformity Verification Report for IEC 61010-2-051@ Particular Requirements for Laboratory Equipment for Mixing and Stirring (Edition 1.0)
IEC TR 61010-3-061:1999 Safety Requirements for Electrical Equipment for Measurement@ Control@ and Laboratory Use - Part 3-061: Conformity Verification Report for IEC 61010-2-061@ Particular Requirements for Laboratory Atomic Spectrometers with Thermal Atomization and Ionization

Professional Standard - Certification and Accreditation, Laboratory Proficiency Verification Report

RB/T 194-2015 Guidelines for the Implementation of Forensic DNA Identification Proficiency Testing

US-CFR-file, Laboratory Proficiency Verification Report

CFR 42-493.1291-2014 Public Health. Part493:Laboratory requirements. Section493.1291:Standard: Test report.
CFR 40-98.3-2013 Protection of environment. Part98:Mandatory greenhouse gas reporting. Subpart A:General provisions. Section98.3:What are the general monitoring, reporting, recordkeeping and verification requirements of this part?

ETSI - European Telecommunications Standards Institute, Laboratory Proficiency Verification Report

TR 103 061-5-2012 Intelligent Transport Systems (ITS); Testing; Part 5: IPv6 over GeoNetworking validation report (V1.1.1)
TR 101 034-1997 Methods for Testing and Specification (MTS); Reports on Experiments in Validation Methodology; PISN Cordless Terminal Mobility Incoming Call Additional Network Feature (ANF-CTMI) (V1.1.1)
TR 103 061-6-2015 Intelligent Transport Systems (ITS); Testing; Conformance test specifications for ITS Security; Part 6: Validation report (V1.1.1)
TR 101 611-2014 Intelligent Transport Systems (ITS); Testing; Conformance test specification for CALM Fast Services; FNTP/FSAP/IICP validation report (V1.1.1)
TR 101 334-1999 Telecommunications and Internet Protocol Harmonization Over Networks (TIPHON); Verification and Demonstration Implementation (VDI); Impementers Handbook and Test Reports; Scenario 1 (V1.1.1)
TR 103 061-1-2014 Intelligent Transport Systems (ITS); Testing; Part 1: Conformance test specifications for Co-operative Awareness Messages (CAM); CAM validation report (V1.2.1)
TR 103 061-1-2012 Intelligent Transport Systems (ITS); Testing; Part 1: Conformance test specification for Co-operative Awareness Messages (CAM); CAM validation report (V1.1.1)

American National Standards Institute （ANSI), Laboratory Proficiency Verification Report

ANSI/ASTM E2489:2011 Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs
ANSI/ASHRAE 51-2016 Laboratory Methods of Testing Fans for Certified Aerodynamic Performance Rating
ANSI/AMCA 210/ASHRAE51-2007 Laboratory Methods of Testing Fans for Certified Aerodynamic Performance Rating
ANSI/ASTM E1224:1996 Guide for Categorizing Fields of Capability for Laboratory Accreditation Purposes
ANSI/HL7 V3 PORT, R 1-2004 HL7 Version 3 Standard: Regulated Studies - Periodic Reporting of Clinical Trials Laboratory Results, , Release 1
ANSI/ASTM/ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories
ANSI/ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories
ANSI/ASHRAE 51-2001 Laboratory Methods of Testing Fans for Aerodynamic Performance Rating
ANSI/AMCA 220-2021 Laboratory Methods of Testing Air Curtain Units for Aerodynamic Performance Rating
ANSI/AMCA 220-2005 Laboratory Methods of Testing Air Curtain Units for Aerodynamic Performance Rating
ANSI/AMCA 240-2015 Laboratory Methods of Testing Positive Pressure Ventilators for Aerodynamic Performance Rating
ANSI/ASTM E2489:2016 Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs

Professional Standard - Hygiene , Laboratory Proficiency Verification Report

WS/T 420-2013 Verification of analytical performance of quantitative kits by clinical laboratory

Military Standard of the People's Republic of China-General Armament Department, Laboratory Proficiency Verification Report

GJB 165.3-1986 Fuze laboratory test Fuze delay tube ignition capability test
GJB 165.3A-2004 Fuze Laboratory Test Part 3: Fuze Delay Barrel Ignition Capability Test
GJB 165.3A-2019 Fuze Laboratory Test Part 3: Fuze Delay Barrel Ignition Capability Test

国家认证认可监督管理委员会, Laboratory Proficiency Verification Report

RB/T 145-2018 Implementation Guide for Solid Strength Capability Testing of Concrete Structures
RB/T 146-2018 Implementation Guide for Mechanical Performance Capability Verification of Metal Products Used in Construction Engineering

SE-SIS, Laboratory Proficiency Verification Report

SIS SS 02 01 80-1987 General requirements for the technical competence of testing laboratories

国家市场监督管理总局, Laboratory Proficiency Verification Report

RB/T 079-2021 Implementation Guide for House Hazard Identification Proficiency Testing
RB/T 055-2020 Competence Guidelines for Conformity Assessment Service Characteristics Assessment Laboratories
RB/T 060.4-2021 Forensic Authentication/Forensic Science Proficiency Testing Implementation Guide Part 4: Document Authentication

IPC - Association Connecting Electronics Industries, Laboratory Proficiency Verification Report

IPC 1753-2013 Laboratory Report Standard (Incorporates Amendment A1: April 2018; Includes Access to Additional Content)

American Society of Quality Control （ASQC), Laboratory Proficiency Verification Report

ASQ 17025-1999 General requirements for the competence of testing and calibration laboratories T17025E
ASQ 17025-2005 General requirements for the competence of testing and calibration laboratories T804

Group Standards of the People's Republic of China, Laboratory Proficiency Verification Report

T/GDWCA 0086-2022 Laboratory?capability?evaluation?specifications for?the?wire?and?cable?industry
T/LNIQA 006-2022 Competence evaluation?specifications for food safety rapid testing laboratories
T/CAS 651-2022 Guidelines for hiring, competency development and assessment supervision of Inspection and testinglaboratory personnel
T/CNMIA 0039-2023 Private Laboratory of Molecular Pathology Performance Capability Evaluation

Lithuanian Standards Office , Laboratory Proficiency Verification Report

LST EN ISO 15189:2013 Medical laboratories - Requirements for quality and competence (ISO 15189:2012)
LST EN ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2005)
LST ISO 14066:2013 Greenhouse gases -- Competence requirements for greenhouse gas validation teams and verification teams (ISO 14066:2011, identical)
LST EN ISO/IEC 17025:2005/AC:2006 General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2005/Cor.1:2006)

NZ-SNZ, Laboratory Proficiency Verification Report

NZS/ISO 15189:2007 Medical Laboratories - Particular Requirements for Quality and Competence
NZS ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories (ISO/IEC 17025:2005)

GOSTR, Laboratory Proficiency Verification Report

GOST ISO/IEC 17025-2019 General requirements for the competence of testing and calibration laboratories

European Telecommunications Standards Institute (ETSI), Laboratory Proficiency Verification Report

ETSI GS NFV-TST 001-2016 Network Functions Virtualisation (NFV); Pre-deployment Testing; Report on Validation of NFV Environments and Services (V1.1.1)
ETSI TR 103 061-5-2012 Intelligent Transport Systems (ITS); Testing; Part 5: IPv6 over GeoNetworking validation report (V1.1.1)
ETSI TR 103 061-6-2015 Intelligent Transport Systems (ITS); Testing; Conformance test specifications for ITS Security; Part 6: Validation report (V1.1.1)
ETSI TR 101 611-2014 Intelligent Transport Systems (ITS); Testing; Conformance test specification for CALM Fast Services; FNTP/FSAP/IICP validation report (V1.1.1)
ETSI TR 103 061-1-2014 Intelligent Transport Systems (ITS); Testing; Part 1: Conformance test specifications for Co-operative Awareness Messages (CAM); CAM validation report (V1.2.1)

Association of German Mechanical Engineers, Laboratory Proficiency Verification Report

VDI 4221 Blatt 2-2017 Quality assurance - Requirements on interlaboratory tests in immission control - Design, performance and evaluation of interlaboratory tests for emission measurement methods under laboratory conditions

WRC - Welding Research Council, Laboratory Proficiency Verification Report

BULLETIN 119-1967 INTERPRETIVE REPORT ON PRESSURE VESSEL HEADS; INTERPRETATIONS OF EXPERIMENTAL DATA ON PRESSURE VESSEL HEADS CONVEX TO PRESSURE

Professional Standard - Nuclear Industry, Laboratory Proficiency Verification Report

EJ/T 20037-2014 Laboratory competency requirements for radioactivity determination of biological samples

BE-NBN, Laboratory Proficiency Verification Report

NBN C 80-109-1978

国家能源局, Laboratory Proficiency Verification Report

NB/T 10523.1-2021 Test methods for mechanical properties of drum shearers Part 1: Laboratory tests

IETF - Internet Engineering Task Force, Laboratory Proficiency Verification Report

RFC 7189-2014 Virtual Circuit Connectivity Verification (VCCV) Capability Advertisement for MPLS Transport Profile (MPLS-TP)

GB-REG, Laboratory Proficiency Verification Report

REG NASA-LLIS-1476-2003 Lessons Learned ?Accident Investigations/Investigation Organizer (IO)/IO Standard and Ad Hoc Report Capability

CZ-CSN, Laboratory Proficiency Verification Report

CSN ISO 7140:1993 Cross-country skis. Determination of dynamic performance. Laboratory measurement method

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Laboratory Proficiency Verification Report

ASHRAE IC 51-1999-02-1999 Laboratory Methods of Testing Fans for Aerodynamic Performance Rating
ASHRAE OR-05-5-2-2005 External Coupling between CFD and Energy Simulation: Implementation and Validation

IX-FAO, Laboratory Proficiency Verification Report

CAC/GL 27-1997 Guidelines for the Assessment of the Competence of Testing Laboratories Involved in the Import and Export Control of Foods
CAC/GL 27-1997,Amended 2006(Ch) Guidelines for Capacity Assessment of Testing Laboratories Engaged in Food Import and Export Control
CAC/GL 27-1997(En) Guidelines for Capacity Assessment of Testing Laboratories Engaged in Food Import and Export Control

NATO - North Atlantic Treaty Organization, Laboratory Proficiency Verification Report

AFLP-8-2005 CAPABILITIES OF NATIONAL/MILITARY LABORATORIES OF NATO AND PARTNER NATIONS (To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0)2 – 707 5556@ email: nso@nso

SAE - SAE International, Laboratory Proficiency Verification Report

SAE J1563-1987 Guidelines and Limitations of Laboratory Cyclic Corrosion Test Procedures for Exterior@ Painted@ Automotive Body Panels
SAE J1563-2016 Guidelines for Laboratory Cyclic Corrosion Test Procedures for Painted Automotive Parts

Canadian Standards Association (CSA), Laboratory Proficiency Verification Report

CAN/CSA-ISO 14066:2012 Greenhouse gases - Competence requirements for greenhouse gas validation teams and verification teams (First Edition)
CSA Z15189-03-CAN/CSA-2003 Laboratoires d碼nalyses de biologie m閐icale Exigences particuli鑢es concernant la qualit?et la comp閠ence Premiere Edition

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Laboratory Proficiency Verification Report

GB/T 35656-2017 Guideline for verification and validation of chemical analysis method and internal quality control—Method on reporting qualitative test reports

North Atlantic Treaty Organization Standards Agency, Laboratory Proficiency Verification Report

STANAG 4616-2005 CAPABILITIES OF NATIONAL/MILITARY LABORATORIES OF NATO AND PARTNER NATIONS - AFlP-8

Professional Standard - Agriculture, Laboratory Proficiency Verification Report

CNAS-CL01-G001-2018 Application Requirements of CNAS-CL01
CNAS-CL01-A025-2022 Explanation on the Application of Testing and Calibration Laboratory Competence Accreditation Criteria in the Field of Calibration

CN-STDBOOK, Laboratory Proficiency Verification Report

图书 3-9833 Understanding and Implementation of GB/T 27025-2019 "General Requirements for the Capability of Testing and Calibration Laboratories"

PL-PKN, Laboratory Proficiency Verification Report

PN-EN ISO 15195-2019-04 P Laboratory medicine -- Requirements for the competence of calibration laboratories using reference measurement procedures (ISO 15195:2018)
PN B13018-1992 Laboratory glassware. Volumetric glassware. Methods for use and testing of capacity