ZH
RU
ES
dish hole labeling
dish hole labeling, Total:171 items.
In the international standard classification, dish hole labeling involves: Earthworks. Excavations. Foundation construction. Underground works, Road vehicle systems, Road engineering, Technical drawings, Fasteners, Equipment for the rubber and plastics industries, Aircraft and space vehicles in general, Thermodynamics and temperature measurements, Chipless working equipment, Iron and steel products, Powder metallurgy, Aerospace fluid systems and components, Kitchen equipment, Particle size analysis. Sieving, Power stations in general, Fasteners for aerospace construction, Organic chemicals, Law. Administration, Water quality, Transformers. Reactors, Character sets and information coding, Plastics, Rubber and plastics products, Seals, glands, Products of the chemical industry, Pipeline components and pipelines, Non-ferrous metals, Waxes, bituminous materials and other petroleum products, Coals, Burners. Boilers, Terminology (principles and coordination), Medical equipment, Electrical wires and cables, Coatings and related processes used in aerospace industry, Construction materials, Bearings, Lubrication systems, Petroleum products in general, Automatic controls for household use, Fluid power systems.
PL-PKN, dish hole labeling
- PN N01620-1983 Technical drawings. Dimensioning. Simplifications of dimensioning of round holes
RO-ASRO, dish hole labeling
- STAS 7895-1990 Laboratory glassware. V-bore stopcocks. Shape and dimensions
HU-MSZT, dish hole labeling
Group Standards of the People's Republic of China, dish hole labeling
NO-SN, dish hole labeling
- NS 5364-1982 Machine tools - Center holes 90 degrees - Dimensioning
CU-NC, dish hole labeling
- NC 02-19-1968 Dimensioning and tolerancing of profiles
- NC 02-04-33-1986 Unified System for Design Documentation. Conventional Representation of Center Holes
German Institute for Standardization, dish hole labeling
- DIN 332-7:1982-09 Machine tools; 60° centre holes; dimensioning
- DIN 6780:2000 Technical drawings - Simplified representation and dimensioning of holes
- DIN ISO 15786:2014-12 Technical drawings - Simplified representation and dimensioning of holes (ISO 15786:2008)
- DIN 472:2017 Retaining rings for bores - Normal type and heavy type
- DIN 472:1981 Circlips (retaining rings) for bores; Normal type and heavy type
- DIN 472:2011 Retaining rings for bores - Normal type and heavy type
- DIN ISO 15786:2014 Technical drawings - Simplified representation and dimensioning of holes (ISO 15786:2008)
- DIN 12622:1981 Laboratory glassware; marking of glass instruments for the determination of type of glass
- DIN 12622:1981-02 Laboratory glassware; marking of glass instruments for the determination of type of glass
- DIN EN 3202:1996-03 Aerospace series - Holes and traps for T-head bolts - Design standard; German version EN 3202:1995
- DIN EN 3149:1996-10 Aerospace series - Shank nuts - Installation holes, 60° swage, flanges - Design standard; German version EN 3149:1996
Society of Automotive Engineers (SAE), dish hole labeling
- SAE J561-1993 Electrical Terminals Eyelet and Spade Type / Note: Approved 2001-12-00.
- SAE AS1300A-1988 Port - Ring Locked Fluid Connection Type, Standard Dimensions for (Reaffirmed: 01 Apr 1993) (Reaffirmed: 01 Oct 2000)
British Standards Institution (BSI), dish hole labeling
- BS ISO 15786:2008 Technical drawings. Simplified representation and dimensioning of holes
- BS EN 3149:1997 Shank nuts - Installation holes, 60 ° swage, flanges - Design standard
- BS ISO/IEC 19763-8:2015 Information technology. Metamodel framework for interoperability (MFI). Metamodel for role and goal model registration
未注明发布机构, dish hole labeling
VN-TCVN, dish hole labeling
- TCVN 4368-1986 System for design documentation.Rules of simple dimensioning for holes
Professional Standard - Aviation, dish hole labeling
- HB 8463-2014 Requirements of three-dimensions annotated model for aviation products
- HB 4529.3-1991 H-type hole system combination fixture positioning part single group hole coordinate adjustment plate
- HB 5647-1981 Labeling, tolerance and smoothness of blade profile (Trial)
- HB 5964-1986 Dovetail Tenon, Tenon and Groove Dimensions and Technical Requirements
- HB 5647-1998 Labeling, Tolerance and Surface Roughness of Blade Airfoil
- HB/Z 149-1989 Plastic injection mold standard mold base structure type, naming, specification, size series
- HB 4529.2-1991 Vertical single-point coordinate adjustment plate for H-type hole combination fixture positioning part
- HB 4529.1-1991 Horizontal single-point coordinate adjustment plate for H-type hole combination fixture positioning part
AIAG - Automotive Industry Action Group, dish hole labeling
- D-27-2008 SASIG 3-D Annotated Model Standard (Version 1)
American Society for Testing and Materials (ASTM), dish hole labeling
- ASTM D4404-84(2004) Standard Test Method for Determination of Pore Volume and Pore Volume Distribution of Soil and Rock by Mercury Intrusion Porosimetry
- ASTM D4404-84(1998)e1 Standard Test Method for Determination of Pore Volume and Pore Volume Distribution of Soil and Rock by Mercury Intrusion Porosimetry
- ASTM B883-19 Standard Specification for Metal Injection Molded (MIM) Materials
- ASTM B883-15 Standard Specification for Metal Injection Molded (MIM) Materials
- ASTM B883-17 Standard Specification for Metal Injection Molded (MIM) Materials
- ASTM F1202-11 Standard Specification for Washing Machines, Heat Sanitizing, Commercial, Pot, Pan, and Utensil Vertically Oscillating Arm Type
- ASTM B883-97 Standard Specification for Metal Injection Molding (MIM), Ferrous Structural Parts
- ASTM D6100-14 Standard Specification for Extruded, Compression Molded and Injection Molded Polyoxymethylene Shapes 40;POM41;
- ASTM F2851-10(2018) Standard Practice for UAS Registration and Marking (Excluding Small Unmanned Aircraft Systems)
- ASTM C478-14 Standard Specification for Precast Reinforced Concrete Manhole Sections
- ASTM D6100-05 Standard Specification for Extruded, Compression Molded and Injection Molded Acetal Shapes (POM)
- ASTM D5990-00 Standard Classification System for Polyketone Injection Molding and Extrusion Materials (PK)
- ASTM C478M-03 Standard Specification for Precast Reinforced Concrete Manhole Sections [Metric]
- ASTM D7292-12 Standard Specification for Extruded, Compression-Molded, and Injection-Molded Basic Shapes of Polyamide-Imide (PAI)
- ASTM D2133-66(1972) Standard Specification For Acetal Resin Injection Molding And Extrusion Materials
- ASTM D2133-81 Standard Specification For Acetal Resin Injection Molding And Extrusion Materials
- ASTM D6262-17 Standard Specification for Extruded, Compression Molded, and Injection Molded Basic Shapes of Poly(aryl ether ketone) (PAEK)
- ASTM C509-00 Standard Specification for Elastomeric Cellular Preformed Gasket and Sealing Material
- ASTM C509-06 Standard Specification for Elastomeric Cellular Preformed Gasket and Sealing Material
- ASTM D3942-19 Standard Test Method for Determination of the Unit Cell Dimension of a Faujasite-Type Zeolite
- ASTM C509-06(2011) Standard Specification for Elastomeric Cellular Preformed Gasket and Sealing Material
- ASTM C497-13 Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile
- ASTM C497-13e1 Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile
- ASTM C478M-14 Standard Specification for Precast Reinforced Concrete Manhole Sections &40;Metric&41;
- ASTM C478-15a Standard Specification for Circular Precast Reinforced Concrete Manhole Sections
- ASTM D3641-21 Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials
- ASTM D6100-11 Standard Specification for Extruded, Compression Molded and Injection Molded Polyoxymethylene Shapes (POM)
- ASTM B793-01e1 Standard Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds
- ASTM D6100-17 Standard Specification for Extruded, Compression Molded and Injection Molded Polyoxymethylene Shapes (POM)
- ASTM F1114-11 Standard Specification for Heat Sanitizing Commercial Pot, Pan, and Utensil Stationary Rack Type Water-Driven Rotary Spray
- ASTM C497M-18 Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile (Metric)
- ASTM C497M-17 Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile (Metric)
- ASTM D5336-15a Standard Classification System and Basis for Specification for Polyphthalamide (PPA) Injection Molding Material
- ASTM C497M-13 Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile (Metric)
- ASTM C497M-13a Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile lpar;Metricrpar;
- ASTM C497M-13ae1 Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile 40;Metric41;
- ASTM C478M-15a Standard Specification for Circular Precast Reinforced Concrete Manhole Sections (Metric)
- ASTM D6421-99a(2009) Standard Test Method for Evaluating Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling by Bench Procedure
- ASTM D5990-20 Standard Classification System and Basis for Polyketone Injection Molding and Extrusion Materials (PK)
- ASTM D5990-20a Standard Classification System and Basis for Polyketone Injection Molding and Extrusion Materials (PK)
- ASTM D7292-06 Standard Specification for Extruded, Compression-Molded, and Injection-Molded Basic Shapes of Polyamide-Imide (PAI)
- ASTM D6262-12 Standard Specification for Extruded, Compression Molded, and Injection Molded Basic Shapes of Poly(aryl ether ketone) (PAEK)
- ASTM F2989-21 Standard Specification for Metal Injection Molded Unalloyed Titanium Components for Surgical Implant Applications
- ASTM D3419-12(2019) Standard Practice for In-Line Screw-Injection Molding Test Specimens From Thermosetting Compounds
- ASTM D3419-12 Standard Practice for In-Line Screw-Injection Molding Test Specimens From Thermosetting Compounds
- ASTM D1975-21 Standard Test Method for Environmental Stress Crack Resistance of Plastic Injection Molded Open Head Pails
- ASTM F1025-19 Standard Guide for Selection and Use of Full-Encirclement-Type Band Clamps for Reinforcement or Repair of Punctures or Holes in Polyethylene Gas Pressure Pipe
- ASTM B793-03 Standard Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds
- ASTM D1975-95(2001)e1 Standard Test Method for Environmental Stress Crack Resistance of Plastic Injection Molded Open Head Pails
- ASTM F2886-17(2023) Standard Specification for Metal Injection Molded Cobalt-28Chromium-6Molybdenum Components for Surgical Implant Applications
- ASTM F2471-05 Standard Practice for Installation of Thick Poured Lightweight Cellular Concrete Underlayments and Preparation of the Surface to Receive Resilient Flooring
- ASTM F2471-08 Standard Practice for Installation of Thick Poured Lightweight Cellular Concrete Underlayments and Preparation of the Surface to Receive Resilient Flooring
- ASTM F2471-13 Standard Practice for Installation of Thick Poured Lightweight Cellular Concrete Underlayments and Preparation of the Surface to Receive Resilient Flooring
- ASTM D6895-06(2012) Standard Test Method for Rotational Viscosity of Heavy Duty Diesel Drain Oils at 100deg;C
- ASTM D1854-96 Standard Specification for Jet-Fuel-Resistant Concrete Joint Sealer, Hot-Applied Elastic Type
- ASTM F2885-17(2023) Standard Specification for Metal Injection Molded Titanium-6Aluminum-4Vanadium Components for Surgical Implant Applications
Association Francaise de Normalisation, dish hole labeling
- NF B35-505:1983 Laboratory glassware. Short enclosed-scale thermometers for precision use.
- NF B35-504:1983 Laboratory glassware. Long enclosed-scale thermometers for precision use.
- NF X11-501*NF ISO 565:1990 Test sieves. Metal wire cloth, peroforated metal plate and electroformed sheet. Nominal sizes of openings.
- NF C52-107:1995 Filling opening for immersed transformers without conservator, allowing the setting of a level indicator or a protection device. Interchangeability dimensions.
- NF L20-021*NF EN 3202:1995 Aerospace series. Holes and traps for T-head bolts design standard.
- NF EN 3202:1995 Série aérospatiale - Trous et dégagements pour vis à tête en T - Norme de conception.
- NF X11-506*NF ISO 2194:1991 Industrial screens. Wowen wire cloth, perforated plate and electroformed sheet. Designation and nominal sizes of openings.
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, dish hole labeling
- GB/T 12555.1-1990 Injection mould for plastic large-size mould bases --Standard mould bases
YU-JUS, dish hole labeling
- JUS B.E4.357-1977 Laboratory glassware and accessories - Short enclose? - scale thermometers for precision use
- JUS B.E4.356-1977 Laboratory glassware and accessories - Long encbsed - scale thermometers for precision use
SE-SIS, dish hole labeling
SAE - SAE International, dish hole labeling
- SAE ARP265A-1959 Airfoil Shapes- Dimensioning of Turbine Engine
- SAE AS1300B-2005 Port - Ring Locked Fluid Connection Type, Standard Dimensions for (Reaffirmed: 01 Apr 1993) (Reaffirmed: 01 Oct 2000)
RU-GOST R, dish hole labeling
- GOST 22476-1977 Fixing and securing holes master pattern plates. Design and dimension
U.S. Military Regulations and Norms, dish hole labeling
GM North America, dish hole labeling
- GM 9986153-1997 Dexron (Registered Trade Mark)-111G Enhanced Automatic Transmission Fluid
American National Standards Institute （ANSI), dish hole labeling
- ANSI/ASTM F1202:2012 Standard Specification for Washing Machines, Heat Sanitizing, Commercial, Pot, Pan, and Utensil Vertically Oscillating Arm Type
CZ-CSN, dish hole labeling
- CSN ISO 565:1994 Test sieves. Metal wire cloth, performated metal and elctroformed sheet. Nominal size of openings
Association of German Mechanical Engineers, dish hole labeling
- VDI 4656-2013 Design and dimensioning of micro combined heat and power plants
American Society of Mechanical Engineers (ASME), dish hole labeling
- ASME 2393-2001 Use of Sealing Push-In Caps to Plug Core Holes in Aluminum Alloy Sand Castings Section IV; (SUPP 10)
IETF - Internet Engineering Task Force, dish hole labeling
- RFC 7410-2014 A Property Types Registry for the Authentication-Results Header Field
- RFC 3302-2002 Tag Image File Format (TIFF) - image/tiff MIME Sub-type Registration (Obsoletes: 2302)
United States Navy, dish hole labeling
- NAVY A-A-59734-2002 TACHOMETER, VIBRATING REED [Superseded: NAVY MIL-T-16049 C NOTICE 2, NAVY MIL-T-16049 C VALID NOTICE 1, NAVY MIL-T-16049 C (3), NAVY MIL-T-16049 C (2), NAVY MIL-T-16049 C (1), NAVY MIL-T-16049 C, NAVY MIL-T-16049 B (1), NAVY MIL-T-16049 B]
- NAVY A-A-59735-2002 HOSE, METALLIC [Superseded: NAVY MIL-H-19034 B CANC NOTICE 1, NAVY MIL-H-19034 B, NAVY MIL-H-19034 A (1), NAVY MIL-H-19034 A]
- NAVY A-A-59612-2004 CABLE, INSTRUMENTATION AND COMMUNICATION, ELECTRONIC [Superseded: NAVY MIL-C-915/74 C CANC NOTICE 1, NAVY MIL-C-915/74 C, NAVY MIL-C-915/74 B, NAVY MIL-C-915/74 A, NAVY MIL-C-915/74]
- NAVY A-A-59767-2005 LIFE PRESERVER, MK-1 [Superseded: NAVY MIL-L-24247 C CANC NOTICE 1, NAVY MIL-L-24247 C, NAVY MIL-L-24247 B, NAVY MIL-L-24247 A (2), NAVY MIL-L-24247 A (1), NAVY MIL-L-24247 A, NAVY MIL-L-24247]
- NAVY A-A-59610-2004 CABLE, COMMUNICATIONS, SPECIAL PURPOSE [Superseded: NAVY MIL-C-915/61 D CANC NOTICE 1, NAVY MIL-C-915/61 D, NAVY MIL-C-915/61 C, NAVY MIL-C-915/61 B, NAVY MIL-C-915/61 A, NAVY MIL-C-915/61]
- NAVY A-A-59615-2004 CABLE, SPECIALTY COMMUNICATIONS [Superseded: NAVY MIL-C-915/5 D CANC NOTICE 1, NAVY MIL-C-915/5 D, NAVY MIL-C-915/5 C, NAVY MIL-C-915/5 B, NAVY MIL-C-00915/5 A, NAVY MIL-C-915/5]
- NAVY A-A-59608-2004 CABLE, POWER AND WELDING, SPECIAL PURPOSE [Superseded: NAVY MIL-C-915/20 F CANC NOTICE 1, NAVY MIL-C-915/20 F, NAVY MIL-C-915/20 E, NAVY MIL-C-915/20 D, NAVY MIL-C-915/20 C, NAVY MIL-C-915/20 A, NAVY MIL-C-915/20]
- NAVY A-A-59772-2005 LIFE PRESERVER, ABANDON SHIP [Superseded: NAVY MIL-L-15581 K NOTICE 1, NAVY MIL-L-15581 K, NAVY MIL-L-15581 J (2), NAVY MIL-L-15581 J (1), NAVY MIL-L-15581 J, NAVY MIL-L-0015581 E (1), NAVY MIL-L-0015581 E]
International Organization for Standardization (ISO), dish hole labeling
- ISO 6194-5:1990 Rotary shaft lip type seals; part 5: identification of visual imperfections
- ISO/IEC 19763-8:2015 Information technology - Metamodel framework for interoperability (MFI) - Part 8: Metamodel for role and goal model registration
- ISO/TS 15000-3:2004 Electronic business eXtensible Markup Language (ebXML) - Part 3: Registry information model specification (ebRIM)
- ISO/CD 24611-1 Language resource management — Morphosyntactic annotation framework (MAF) — Part 1: Core model
- ISO 12128:2001 Plain bearings - Lubrication holes, grooves and pockets - Dimensions, types, designation and their application to bearing bushes
- ISO 6099:2001 Fluid power systems and components - Cylinders - Identification code for mounting dimensions and mounting types
(U.S.) Ford Automotive Standards, dish hole labeling
- FORD WSS-M4C117-A-2010 FUEL, DIESEL, INITIAL FILL, ARGENTINA ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2C922-A1-2009 FLUID, AUTOMATIC TRANSMISSION, INITIAL AND SERVICE FILL, RED ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2C926-A-2009 OIL, ENGINE, INITIAL AND SERVICE FILL SAE 10W-60 ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4C124-A-2010 FUEL, DIESEL, INITIAL FILL, HIGH SULFUR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESB-M2D354-A2-2004 POLYURETHANE MICROCELLULAR ELASTOMER, 15% GLASS FIBER REINFORCED - RRIM - EXTERIOR - PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESB-M2D354-A2-2009 POLYURETHANE MICROCELLULAR ELASTOMER, 15% GLASS FIBER REINFORCED - RRIM - EXTERIOR - PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2C926-A2-2009 OIL, ENGINE, INITIAL AND SERVICE FILL SAE 5W-50 ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2C926-A)
- FORD WSS-M2C945-A-2010 OIL, ENGINE, ILSAC GF-5, INITIAL AND SERVICE FILLSAE 5W-20 ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2C945-A-2013 OIL, ENGINE, ILSAC GF-5, INITIAL AND SERVICE FILLSAE 5W-20 ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2C911-A1-2009 OIL, ENGINE, EUROPEAN INITIAL FILL, SAE 10W-40 ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4C126-A1-2009 FUEL, DIESEL, LUBRICITY ENHANCED INITIAL FILL, 51 CETANE ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESB-M2D348-A4-2004 POLYURETHANE (PUR) MICROCELLULAR ELASTOMER, REACTION INJECTION MOLDED (RIM), PAINTABLE, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESB-M2D348-A4-2009 POLYURETHANE (PUR) MICROCELLULAR ELASTOMER, REACTION INJECTION MOLDED (RIM), PAINTABLE, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESB-M2D395-A-2004 POLYURETHANE (PUR) ELASTOMER, MICROCELLULAR, 11-12% GLASS FIBER REINFORCED, RRIM, EXTERIOR, PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESB-M2D395-A-2009 POLYURETHANE (PUR) ELASTOMER, MICROCELLULAR, 11 - 12% GLASS FIBER REINFORCED, RRIM, EXTERIOR, PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSB-M15P43-A-2007 PERFORMANCE, HEADREST, BLOW MOLDED, FOAM INJECTED - ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4C113-B-2009 FUEL, E22, UNLEADED, INITIAL FILL, BRAZIL ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2C205-A-2009 OIL, ENGINE, ILSAC GF - 3, SERVICE FILL ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4C125-A-2006 GASOLINE, UNLEADED, INITIAL FILL, ALKYLATE, PREMIUM GRADE ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2C171-D-2004 OIL, ENGINE, API CI-4/SL, SERVICE FILL ***TO BE USED WITH WSS-M99P1111-A***
- FORD WSS-M2C171-C-2009 OIL, ENGINE, API CH-4/SJ, SERVICE FILL ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2C916-A-2009 OIL, ENGINE, API SJ, SAE 15W-50 INITIAL FILL ***TO BE USED WITH FORD WSS-M99P1111-A***
AENOR, dish hole labeling
- UNE-EN 3202:1996 AEROSPACE SERIES. HOLES AND TRAPS FOR T-HEAD BOLTS. DESIGN STANDARD.
Institute of Electrical and Electronics Engineers (IEEE), dish hole labeling
- ST 239:2004 ST 239:2004 - SMPTE Standard - For Motion-Picture Film (16-mm) — Perforated 8-mm Type R, 2R
- SMPTE ST 168:2001 ST 168:2001 - SMPTE Standard - For Motion-Picture Film (16-mm) — Perforated 8-mm Type S, (1-4)
- SMPTE ST 149:2004 ST 149:2004 - SMPTE Standard - For Motion-Picture Film (8-mm Type S) — Perforated 1R
- ST 149:2004 ST 149:2004 - SMPTE Standard - For Motion-Picture Film (8-mm Type S) — Perforated 1R
- SMPTE ST 201:1996 ST 201:1996 - SMPTE Standard - For Motion-Picture Film (16-mm)— Type W Camera Aperture Image
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, dish hole labeling
- GB/T 32392.8-2018 Information technology—Metamodel framework for interoperability (MFI)—Part 8: Metamodel for role and goal model registration
TH-TISI, dish hole labeling
- TIS 2038-2000 Standard for portland cement concrete pavements joint sealer, hot-poured elastomeric type
Professional Standard - Geology, dish hole labeling
- DZ/T 0002.2-1991 Coal-bearing rock series drilling core description standard petrogenetic type part
VE-FONDONORMA, dish hole labeling
Korean Agency for Technology and Standards (KATS), dish hole labeling
- KS X ISO TS 15000-3:2014 ebXML — Part 3: Registry Information Model(RIM) V2.1
- KS B ISO 12128:2002 Plain Bearings－Lubrication holes, grooves and pockets－Dimension, types, designation and their application to bearing bushes
Canadian Standards Association (CSA), dish hole labeling
- CSA S136.1-95-1995 Commentary on CSA Standard S136-94, Cold Formed Steel Structural Members General Instruction No 1
ES-AENOR, dish hole labeling
- UNE-EN 28362-4:1994 Injection containers for injectables and accessories. Part 4: Injection vials made of moulded glass (ISO 8362-4: 1989)
AT-ON, dish hole labeling
- ONORM EN 3149-1996 Aerospace series-Shank nuts-Installation holes,60 degree swage,flanges-Design standard
Danish Standards Foundation, dish hole labeling
- DS/EN 3149:1997 Aerospace series - Shank nuts - Installation holes, 60° swage, flanges - Design standard
Lithuanian Standards Office , dish hole labeling
- LST EN 3149-2001 Aerospace series - Shank nuts - Installation holes, 60° swage, flanges - Design standard
European Committee for Standardization (CEN), dish hole labeling
- EN 3149:1996 Aerospace series - Shank nuts - Installation holes, 60° swage, flanges - Design standard