ZH
RU
ES

How to use the test hammer

How to use the test hammer, Total:500 items.

In the international standard classification, How to use the test hammer involves: Rubber, Soil quality. Pedology, Linear and angular measurements, Road engineering, Rubber and plastics products, Road vehicles in general, Installations in buildings, Mining and quarrying, Construction materials, Semiconductor devices, Products of the textile industry, Paints and varnishes, Protective equipment, Paper and board, Protection of and in buildings, Pumps, Pipeline components and pipelines, Measurement of volume, mass, density, viscosity, Hand-held tools, Insulating materials, Radiation measurements, Measurement of force, weight and pressure, Sterilization and disinfection, Testing of metals, Reinforced plastics, Water quality, Plastics, Products of the chemical industry, Metrology and measurement in general, Corrosion of metals, Glass, Road vehicle systems, Footwear, Printed circuits and boards, Analytical chemistry, Mechanical testing, Manufacturing processes in the rubber and plastics industries, Diagnostic, maintenance and test equipment, Storing. Warehousing, Earthworks. Excavations. Foundation construction. Underground works, Organic chemicals, Coals, Vibration and shock with respect to human beings, Non-destructive testing, Non-ferrous metals, Lubricants, industrial oils and related products, Electricity. Magnetism. Electrical and magnetic measurements, Thermodynamics and temperature measurements, Elements of buildings, Insulation, Telecommunication systems, Construction of airports, Air quality, Clothes, Fuels, Telecontrol. Telemetering, Radiation protection, Fluid storage devices, Alarm and warning systems, Radiocommunications, Equipment for entertainment, Adhesives, Magnetic materials, Applications of information technology, Hospital equipment, Bridge construction, Metalliferous minerals, Vibrations, shock and vibration measurements, Shipbuilding and marine structures in general, Acoustics and acoustic measurements, Continuous handling equipment, Bearings, Insulating fluids, Geology. Meteorology. Hydrology, Surface treatment and coating, Particle size analysis. Sieving, Kitchen equipment, Medical equipment, Law. Administration, Fluid power systems, Electrical wires and cables.

The American Road & Transportation Builders Association, How to use the test hammer

AASHTO T 278-1990(R2007) Standard Method of Test for Surface Frictional Properties Using the British Pendulum Tester
AASHTO T 99-2010 Standard Method of Test for Moisture-Density Relations of Soils Using a 2.5-kg (5.5-lb) Rammer and a 305-mm (12-in.) Drop
AASHTO T 99-2015 Standard Method of Test for Moisture-Density Relations of Soils Using a 2.5-kg (5.5-lb) Rammer and a 305-mm (12-in.) Drop
AASHTO T 99-2021 Standard Method of Test for Moisture-Density Relations of Soils Using a 2.5-kg (5.5-lb) Rammer and a 305-mm (12-in.) Drop
AASHTO T 180-2010 Standard Method of Test for Moisture-Density Relations of Soils Using a 4.54-kg (10-lb) Rammer and a 457-mm (18-in.) Drop
AASHTO T 180-2015 Standard Method of Test for Moisture-Density Relations of Soils Using a 4.54-kg (10-lb) Rammer and a 457-mm (18-in.) Drop
AASHTO T 180-2018 Standard Method of Test for Moisture-Density Relations of Soils Using a 4.54-kg (10-lb) Rammer and a 457-mm (18-in.) Drop
AASHTO T 180-2021 Standard Method of Test for Moisture-Density Relations of Soils Using a 4.54-kg (10-lb) Rammer and a 457-mm (18-in.) Drop
AASHTO T 99-2001 Standard Method of Test for Moisture-Density Relations of Soils Using a 2.5-kg (5.5-lb) Rammer and a 305-mm (12-in.) Drop
AASHTO T 180-2001 Standard Method of Test for Moisture-Density Relations of Soils Using a 4.54-kg (10-lb) Rammer and a 457-mm (18-in.) Drop
AASHTO T 250-2005 Standard Method of Test for Thermoplastic Traffic Line Material
AASHTO TP 76-2011 Standard Method of Test for Measurement of Tire/Pavement Noise Using the On-Board Sound Intensity (OBSI) Method
AASHTO TP 76-2012 Standard Method of Test for Measurement of Tire/Pavement Noise Using the On-Board Sound Intensity (OBSI) Method
AASHTO TP 76-2015 Standard Method of Test for Measurement of Tire/Pavement Noise Using the On-Board Sound Intensity (OBSI) Method
AASHTO T 360-2016 Standard Method of Test for Measurement of Tire/Pavement Noise Using the On-Board Sound Intensity (OBSI) Method
AASHTO TP 76-2013 Standard Method of Test for Measurement of Tire/Pavement Noise Using the On-Board Sound Intensity (OBSI) Method
AASHTO T 279-2012 Standard Method of Test for Accelerated Polishing of Aggregates Using the British Wheel
AASHTO T278-1990 Standard Method of Test for Surface Frictional Properties Using the British Pendulum Tester Twentieth Edition; ASTM E303-93 R(1999)

AASHTO - American Association of State Highway and Transportation Officials, How to use the test hammer

T 278-1990 Standard Method of Test for Surface Frictional Properties Using the British Pendulum Tester
T 99-2001 Standard Method of Test for Moisture-Density Relations of Soils Using a 2.5-kg (5.5-lb) Rammer and a 305-mm (12-in.) Drop
T 99-2015 Standard Method of Test for Moisture-Density Relations of Soils Using a 2.5-kg (5.5-lb) Rammer and a 305-mm (12-in.) Drop
T 99-2010 Standard Method of Test for Moisture-Density Relations of Soils Using a 2.5-kg (5.5-lb) Rammer and a 305-mm (12-in.) Drop
T 99-2017 Standard Method of Test for Moisture–Density Relations of Soils Using a 2.5-kg (5.5-lb) Rammer and a 305-mm (12-in.) Drop
T 180-2017 Standard Method of Test for Moisture-Density Relations of Soils Using a 4.54-kg (10-lb) Rammer and a 457-mm (18-in.) Drop
T 180-2001 Standard Method of Test for Moisture-Density Relations of Soils Using a 4.54-kg (10-lb) Rammer and a 457-mm (18-in.) Drop
T180-1993 Standard Method of Test for Moisture-Density Relations of Soils Using a 4.54-kg (10-lb) Rammer and a 457-mm (18-in.) Drop
T 180-2015 Standard Method of Test for Moisture-Density Relations of Soils Using a 4.54-kg (10-lb) Rammer and a 457-mm (18-in.) Drop
T 180-2009 Standard Method of Test for Moisture-Density Relations of Soils Using a 4.54-kg (10-lb) Rammer and a 457-mm (18-in.) Drop
T99-1994 Standard Method of Test for the Moisture-Density Relations of Soils Using a 2.5 kg (5.5 lb) Rammer and a 305 mm (12 in.) Drop
T 180-2010 Standard Method of Test for Moisture-Density Relations of Soils Using a 4.54-kg (10-lb) Rammer and a 457-mm (18-in.) Drop
TP 76-2012 Standard Method of Test for Measurement of Tire/Pavement Noise Using the On-Board Sound Intensity (OBSI) Method
TP 76-2013 Standard Method of Test for Measurement of Tire/Pavement Noise Using the On-Board Sound Intensity (OBSI) Method
TP 76-2011 Standard Method of Test for Measurement of Tire/Pavement Noise Using the On-Board Sound Intensity (OBSI) Method
T 360-2016 Standard Method of Test for Measurement of Tire/Pavement Noise Using the On-Board Sound Intensity (OBSI) Method
TP 76-2009 Standard Method of Test for Measurement of Tire/Pavement Noise Using the On-Board Sound Intensity (OBSI) Method
TP 76-2008 Standard Method of Test for Measurement of Tire/Pavement Noise Using the On-Board Sound Intensity (OBSI) Method
TP 76-2015 Standard Method of Test for Measurement of Tire/Pavement Noise Using the On-Board Sound Intensity (OBSI) Method
T 279-1996 Standard Method of Test for Accelerated Polishing of Aggregates Using the British Wheel
T 279-2018 Standard Method of Test for Accelerated Polishing of Aggregates Using the British Wheel
T 279-2012 Standard Method of Test for Accelerated Polishing of Aggregates Using the British Wheel
TP 76-2010 Standard Method of Test for Measurement of Tire/Pavement Noise Using the On-Board Sound Intensity (OBSI) Method (Revision 1)

American Society for Testing and Materials (ASTM), How to use the test hammer

ASTM D1054-91(2000) Standard Test Method for Rubber Property-Resilience Using a Rebound Pendulum
ASTM E303-93(2018) Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
ASTM E2583-07(2015) Standard Test Method for Measuring Deflections with a Light Weight Deflectometer (LWD)
ASTM E303-93(1998) Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
ASTM D7382-20 Standard Test Methods for Determination of Maximum Dry Unit Weight of Granular Soils Using a Vibrating Hammer
ASTM F736-95(2001) Standard Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight
ASTM D5873-05 Standard Test Method for Determination of Rock Hardness by Rebound Hammer Method
ASTM D5873-00(2005)e1 Standard Test Method for Determination of Rock Hardness by Rebound Hammer Method
ASTM D5873-00 Standard Test Method for Determination of Rock Hardness by Rebound Hammer Method
ASTM D5873-14 Standard Test Method for Determination of Rock Hardness by Rebound Hammer Method
ASTM D5420-04 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
ASTM D5420-10 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
ASTM D4272-08 Standard Test Method for Total Energy Impact of Plastic Films By Dart Drop
ASTM D4272-08a Standard Test Method for Total Energy Impact of Plastic Films By Dart Drop
ASTM D4272-14 Standard Test Method for Total Energy Impact of Plastic Films By Dart Drop
ASTM D4272/D4272M-15 Standard Test Method for Total Energy Impact of Plastic Films by Dart Drop
ASTM D5420-98a Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
ASTM E2235-04(2020) Standard Test Method for Determination of Decay Rates for Use in Sound Insulation Test Methods
ASTM E303-22 Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
ASTM D2444-99(2005) Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
ASTM F736-17(2023) Standard Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight
ASTM D7121-05(2012) Standard Test Method for Rubber Propertymdash;Resilience Using Schob Type Rebound Pendulum
ASTM F736-95(2006) Standard Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight
ASTM D6110-06 Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
ASTM E303-93(2008) Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
ASTM D1922-23 Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
ASTM D256-10e1 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
ASTM D1054-02(2007) Standard Test Method for Rubber Property-Resilience Using a Goodyear-Healey Rebound Pendulum
ASTM D1054-02 Test Method for Rubber Property-Resilience Using a Goodyear-Healey Rebound Pendulum
ASTM D1054-02e1 Standard Test Method for Rubber Property-Resilience Using a Goodyear-Healey Rebound Pendulum
ASTM E303-93(2013) Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
ASTM D4495-00 Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight
ASTM D4495-00(2005) Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight
ASTM D1922-06 Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
ASTM D1922-06a Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
ASTM D2444-99(2010) Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
ASTM D4495-21 Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight
ASTM D1922-15(2020) Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
ASTM D1922-00a Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
ASTM D1922-15 Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
ASTM D1922-08 Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
ASTM D1922-09 Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
ASTM E2314-03(2008) Standard Test Method for Determination of Effectiveness of Cleaning Processes for Reusable Medical Instruments Using a Microbiologic Method (Simulated Use Test)
ASTM D6587-12 Standard Test Method for Yarn Number Using Automatic Tester
ASTM D6587-12(2018) Standard Test Method for Yarn Number Using Automatic Tester
ASTM D5734-95(2001) Standard Test Method for Tearing Strength of Nonwoven Fabrics by Falling-Pendulum (Elmendorf) Apparatus
ASTM D256-05a Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
ASTM D256-05 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
ASTM D256-06 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
ASTM D256-06a Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
ASTM D4495-12 Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight
ASTM D1922-03a Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
ASTM D1922-03 Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
ASTM D1922-05 Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
ASTM F736-95(2011) Standard Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight
ASTM B873-17 Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212, B329, and B417
ASTM D4366-16 Standard Test Methods for Hardness of Organic Coatings by Pendulum Damping Tests
ASTM D256-10 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
ASTM E303-93(2003) Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
ASTM C1042-99 Standard Test Method for Bond Strength of Latex Systems Used With Concrete By Slant Shear
ASTM D6110-02 Standard Test Methods for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
ASTM D6110-04 Standard Test Methods for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
ASTM D6110-97 Standard Test Methods for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
ASTM D6110-08 Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
ASTM D6110-05 Standard Test Methods for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
ASTM G202-12(2020) Standard Test Method for Using Atmospheric Pressure Rotating Cage
ASTM G202-12(2016) Standard Test Method for Using Atmospheric Pressure Rotating Cage
ASTM D5628-10 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
ASTM F1678-96 Standard Test Method for Using a Portable Articulated Strut Slip Tester (PAST)
ASTM C1163-08 Standard Practice for Mounting Actinides for Alpha Spectrometry Using Neodymium Fluoride
ASTM B873-23 Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212, B329, and B417
ASTM D8490-23a Standard Test Method for Determining the Pore Size Characteristics of Geotextiles Using an Optical Method
ASTM F2203-02 Standard Test Method for Linear Measurement Using Precision Steel Rule
ASTM F2203-13(2018) Standard Test Method for Linear Measurement Using Precision Steel Rule
ASTM F2203-02(2012) Standard Test Method for Linear Measurement Using Precision Steel Rule
ASTM F559-95(2000) Standard Test Method for Measuring Length of Road Test Courses Using a Fifth Wheel
ASTM F559-05(2017) Standard Test Method for Measuring Length of Road Test Courses Using a Fifth Wheel
ASTM D5628-96(2001)e1 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
ASTM G99-03 Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus
ASTM G57-95a(2001) Standard Test Method for Field Measurement of Soil Resistivity Using the Wenner Four-Electrode Method
ASTM G57-95A Standard Test Method for Field Measurement of Soil Resistivity Using the Wenner Four-Electrode Method
ASTM D5386-93b(2000)e1 Standard Test Method for Color of Liquids Using Tristimulus Colorimetry
ASTM D5386-16 Standard Test Method for Color of Liquids Using Tristimulus Colorimetry
ASTM D409/D409M-12e1 Standard Test Method for Grindability of Coal by the Hardgrove-Machine Method
ASTM D1424-96 Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum Type (Elmendorf) Apparatus
ASTM D1424-96(2004) Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum Type (Elmendorf) Apparatus
ASTM D1424-09 Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum Type (Elmendorf) Apparatus
ASTM D1424-09(2013) Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum (Elmendorf-Type) Apparatus
ASTM D5628-07 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
ASTM D5628-06 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
ASTM D1425/D1425M-14(2020) Standard Test Method for Evenness of Textile Strands Using Capacitance Testing Equipment
ASTM E1615-05 Standard Test Method for Iron in Trace Quantities Using the FerroZine Method
ASTM E1615-04 Standard Test Method for Iron in Trace Quantities Using the FerroZine Method
ASTM E1615-00 Standard Test Method for Iron in Trace Quantities Using the FerroZine Method
ASTM D971-12 Standard Test Method for Interfacial Tension of Oil Against Water by the Ring Method
ASTM E1004-17 Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy Current) Method
ASTM E1615-08 Standard Test Method for Iron in Trace Quantities Using the FerroZine Method
ASTM E1837-96(2014) Standard Test Method to Determine Efficacy of Disinfection Processes for Reusable Medical Devices (Simulated Use Test)
ASTM E422-05(2016) Standard Test Method for Measuring Heat Flux Using a Water-Cooled Calorimeter
ASTM D5298-16 Standard Test Method for Measurement of Soil Potential (Suction) Using Filter Paper
ASTM C1197-20e1 Standard Test Method for In Situ Measurement of Masonry Deformability Properties Using the Flatjack Method
ASTM C1197-20 Standard Test Method for In Situ Measurement of Masonry Deformability Properties Using the Flatjack Method
ASTM E2347-05 Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis
ASTM E2347-04 Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis
ASTM D6503-14 Standard Test Method for Enterococci in Water Using Enterolert
ASTM D5386-10 Standard Test Method for Color of Liquids Using Tristimulus Colorimetry
ASTM D3525-04(2016) Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Gas Chromatography
ASTM D5386-04 Standard Test Method for Color of Liquids Using Tristimulus Colorimetry
ASTM D4541-09 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
ASTM E208-06 Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels
ASTM D2639/D2639M-13 Standard Test Method for Plastic Properties of Coal by the Constant-Torque Gieseler Plastometer
ASTM E2070-13(2018) Standard Test Method for Kinetic Parameters by Differential Scanning Calorimetry Using Isothermal Methods
ASTM D6913-04 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM D6913-04e1 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM D6913-04(2009) Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM E2008-99 Standard Test Method for Volatility Rate by Thermogravimetry
ASTM D2256/D2256M-10(2015) Standard Test Method for Tensile Properties of Yarns by the Single-Strand Method
ASTM D5776-14a Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration
ASTM D5800-14 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
ASTM D4287-00(2019) Standard Test Method for High-Shear Viscosity Using a Cone/Plate Viscometer
ASTM E2380/E2380M-15(2019) Standard Test Method for Measuring Pavement Texture Drainage Using an Outflow Meter
ASTM D7811-13(2022) Standard Test Method for Bow and Skew Using a Measuring Tool
ASTM E2314-03(2014) Standard Test Method for Determination of Effectiveness of Cleaning Processes for Reusable Medical Instruments Using a Microbiologic Method (Simulated Use Test)
ASTM C1163-98 Standard Test Method for Mounting Actinides for Alpha Spectrometry Using Neodymium Fluoride
ASTM D1200-94(1999) Standard Test Method for Viscosity by Ford Viscosity Cup
ASTM F1720-96(2004) Standard Test Method for Measuring Thermal Insulation of Sleeping Bags Using a Heated Manikin
ASTM F2203-13 Standard Test Method for Linear Measurement Using Precision Steel Rule
ASTM D6325-98(2011) Test Method for Determining Open Assembly Time of Carpet Mastic Adhesives
ASTM D7811-13(2017) Standard Test Method for Bow and Skew Using a Measuring Tool
ASTM A596/A596M-95(1999) Standard Test Method for Direct-Current Magnetic Properties of Materials Using the Ballistic Method and Ring Specimens
ASTM E502-21 Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods
ASTM E502-06a Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods
ASTM E502-06 Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods
ASTM E502-84(2000) Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods
ASTM E502-84(1994) Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods
ASTM F3218-17 Standard Practice for Recording Environmental Effects for Utilization with A-UGV Test Methods
ASTM E2926-17 Standard Test Method for Forensic Comparison of Glass Using Micro X-ray Fluorescence (µ-XRF) Spectrometry
ASTM D572-04(2015) Standard Test Method for Rubber&x2014;Deterioration by Heat and Oxygen
ASTM E2835-11(2020) Standard Test Method for Measuring Deflections Using a Portable Impulse Plate Load Test Device
ASTM E2835-21 Standard Test Method for Measuring Deflections Using a Portable Impulse Plate Load Test Device
ASTM D1424-07a Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum Type (Elmendorf) Apparatus
ASTM D6355-07 Standard Test Method for Human Repeat Insult Patch Testing of Medical Gloves
ASTM D4788-88(2001) Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography
ASTM E408-13(2019) Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques
ASTM D4788-03(2013) Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography
ASTM D8161-17(2022) Standard Test Method for Impact Resistance of Thermoplastic Pavement Marking Materials over a Highway Substrate by Means of a Striker Impacted by a Falling Weight
ASTM E670-09(2020) Standard Test Method for Testing Side Force Friction on Paved Surfaces Using the Mu-Meter
ASTM D4938-89(2013) Standard Test Method for Erosion Testing of Antifouling Paints Using High Velocity Water
ASTM D7317-06 Standard Test Method for Insolubles in Used Lubricating Oils by Paper Filtration (LMOA Method)
ASTM E1641-04 Standard Test Method for Decomposition Kinetics by Thermogravimetry
ASTM E1347-06(2015) Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry
ASTM E1503-97 Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Analysis System
ASTM F1291-04 Standard Test Method for Measuring the Thermal Insulation of Clothing Using a Heated Manikin
ASTM E965-15(2019) Standard Test Method for Measuring Pavement Macrotexture Depth Using a Volumetric Technique
ASTM F1720-17 Standard Test Method for Measuring Thermal Insulation of Sleeping Bags Using a Heated Manikin
ASTM F1291-16 Standard Test Method for Measuring the Thermal Insulation of Clothing Using a Heated Manikin
ASTM B966-10 Standard Test Method for Permeability of Powder Metallurgy (PM) Bearings Using Nitrogen Gas
ASTM C461-81(1997)e1 Standard Test Methods for Mastics and Coatings Used With Thermal Insulation
ASTM D1424-09(2013)e1 Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum (Elmendorf-Type) Apparatus
ASTM E1641-18 Standard Test Method for Decomposition Kinetics by Thermogravimetry Using the Ozawa/Flynn/Wall Method
ASTM D4400-18 Standard Test Method for Sag Resistance of Paints Using a Multinotch Applicator
ASTM E1703/E1703M-95(2005) Standard Test Method for Measuring Rut-Depth of Pavement Surfaces Using a Straightedge
ASTM E1703/E1703M-10 Standard Test Method for Measuring Rut-Depth of Pavement Surfaces Using a Straightedge
ASTM E1703/E1703M-95(2000) Standard Test Method for Measuring Rut-Depth of Pavement Surfaces Using a Straightedge
ASTM D5298-10 Standard Test Method for Measurement of Soil Potential (Suction) Using Filter Paper
ASTM G167-00 Standard Test Method for Calibration of a Pyranometer Using a Pyrheliometer
ASTM E1703/E1703M-10(2015) Standard Test Method for Measuring Rut-Depth of Pavement Surfaces Using a Straightedge
ASTM G32-10 Standard Test Method for Cavitation Erosion Using Vibratory Apparatus
ASTM E422-05(2011) Standard Test Method for Measuring Heat Flux Using a Water-Cooled Calorimeter
ASTM D5776-99(2006) Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration
ASTM F3583-22 Standard Test Method for Exoskeleton Use: Beams
ASTM D1005-95(2001) Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers
ASTM D4366-14 Standard Test Methods for Hardness of Organic Coatings by Pendulum Damping Tests
ASTM D6740-15(2019) Standard Test Method for Silanes Used in Rubber Formulations(bis-(triethoxysilylpropyl)sulfanes): Residue on Ignition
ASTM D6741-10(2019) Standard Test Methods for Silanes Used in Rubber Formulations(bis-(triethoxysilylpropyl)sulfanes): Sulfur Content
ASTM D5277-92(2002) Standard Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester
ASTM G57-06(2012) Standard Test Method for Field Measurement of Soil Resistivity Using the Wenner Four-Electrode Method
ASTM D4645-08 Standard Test Method for Determination of In-Situ Stress in Rock Using Hydraulic Fracturing Method
ASTM D1005-95 Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers
ASTM E2683-17 Standard Test Method for Measuring Heat Flux Using Flush-Mounted Insert Temperature-Gradient Gages
ASTM E457-08(2020) Standard Test Method for Measuring Heat-Transfer Rate Using a Thermal Capacitance (Slug) Calorimeter
ASTM D1005-95(2020) Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers
ASTM D6391-11(2020) Standard Test Method for Field Measurement of Hydraulic Conductivity Using Borehole Infiltration
ASTM D1708-10 Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens
ASTM D3482-90(2000) Standard Test Method for Determining Electrolytic Corrosion of Copper by Adhesives
ASTM D732-10 Standard Test Method for Shear Strength of Plastics by Punch Tool
ASTM E2980-20 Standard Test Methods for Estimating Average Particle Size of Powders Using Air Permeability
ASTM F1738-23 Standard Test Method for Determination of Deposition of Aerially Applied Oil Spill Dispersants
ASTM D5587-14 Standard Test Method for Tearing Strength of Fabrics by Trapezoid Procedure
ASTM D7317-07(2013) Standard Test Method for Coagulated Pentane Insolubles in Used Lubricating Oils by Paper Filtration (LMOA Method)
ASTM D5346-93(1997) Standard Test Method for Determination of the Pour Point of Petroleum Oil Used in Fatliquors and Softening Compounds
ASTM A772/A772M-00 Standard Test Method for ac Magnetic Permeability of Materials Using Sinusoidal Current
ASTM A772/A772M-00(2022) Standard Test Method for AC Magnetic Permeability of Materials Using Sinusoidal Current
ASTM A772/A772M-00(2016) Standard Test Method for AC Magnetic Permeability of Materials Using Sinusoidal Current
ASTM D7214-07a(2012) Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM F735-94 Standard Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using the Oscillating Sand Method
ASTM D5399-95(2000) Standard Test Method for Boiling Point Distribution of Hydrocarbon Solvents by Gas Chromatography
ASTM F735-94(2001) Standard Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using the Oscillating Sand Method

Korean Agency for Technology and Standards (KATS), How to use the test hammer

KS F 2312-2016 Test method for soil compaction using a rammer
KS F 2312-2001 Test method for soil compaction using a rammer
KS F 2312-2016(2021) Test method for soil compaction using a rammer
KS F 2375-2016(2021) Testing method for measuring surface frictional properties using the British Pendulum Tester
KS F 2375-2016 Testing method for measuring surface frictional properties using the British Pendulum Tester
KS A 0086-2002(2017) Outgas test method using increasing pressure
KS D 0285-2015(2020) Standard test method for conducting drop-weight test to determine nill-ductility transition temperature of ferritic steels
KS M 6755-2014(2019) Testing methods of non-pneumatic tires for use on passenger car
KS B 6325-2001(2016) TESTING METHODS FOR PERFORMANCE OF PUMP, USING MODEL PUMP
KS R ISO 3006:2018 Road vehicles — Passenger car wheels for road use — Test methods
KS F 2507-2007(2017) Method of test for soundness of aggregates by use of sodium sulfate
KS M 3032-2002 TESTING METHOD FOR FLAMMABILITY OF POLYMERIC MATERIALS USING THE OXYGEN INDEX METHOD
KS M 6695-2016 Testing method of crack growth using Demattia flex-cracking apparatus
KS B 5648-2002(2022) Pressure test method and vacuum vessel leak detection methodusing mass spectrometer
KS F 2316-2017 Test method for one－dimensional consolidation properties of soils using incremental loading

Japanese Industrial Standards Committee (JISC), How to use the test hammer

JIS A 1210:1999 Test method for soil compaction using a rammer
JIS S 3200-3:1997 Equipment for water supply service -- Test method of water hammer
JIS K 7061:1992 Testing method for charpy impact strength of glass fiber reinforced plastics
JIS K 7211:1976 General rules for testing impact strength of rigid plastics by the falling weight method
JIS Z 2333:2005 Test method for leaks using ammonia gas
JIS K 7201:1995 Testing method for flammability of polymeric materials using the oxygen index method
JIS A 1122:2005 Method of test for soundness of aggregates by use of sodium sulfate
JIS A 1122:2014 Method of test for soundness of aggregates by use of sodium sulfate
JIS S 2075:2011 Measurement method of efficiency for domestic gas and oil water heater under standard usage mode

German Institute for Standardization, How to use the test hammer

DIN EN 14231:2003-07 Natural stone test methods - Determination of the slip resistance by means of the pendulum tester; German version EN 14231:2003
DIN 53142-1:2014-12 Testing of board - Puncture test - Part 1: Puncture test with a pendulum punching device
DIN EN ISO 13161:2019-11 Water quality - Polonium 210 - Test method using alpha spectrometry (ISO/DIS 13161:2019); German and English version prEN ISO 13161:2019 / Note: Date of issue 2019-09-27*Intended as replacement for DIN EN ISO 13161 (2016-01).
DIN EN ISO 13165-2:2021-10 Water quality - Radium-226 - Part 2: Test method using emanometry (ISO/DIS 13165-2:2021); German and English version prEN ISO 13165-2:2021 / Note: Date of issue 2021-09-17*Intended as replacement for DIN EN ISO 13165-2 (2020-12).
DIN EN ISO 13164-3:2020-12 Water quality - Radon-222 - Part 3: Test method using emanometry (ISO 13164-3:2013); German version EN ISO 13164-3:2020
DIN EN ISO 13165-2:2020-12 Water quality - Radium-226 - Part 2: Test method using emanometry (ISO 13165-2:2014); German version EN ISO 13165-2:2020 / Note: To be replaced by DIN EN ISO 13165-2 (2021-10).
DIN EN 13036-4:2011-12 Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface - The pendulum test; German version EN 13036-4:2011
DIN EN ISO 9697:2020-12 Water quality - Gross beta activity - Test method using thick source (ISO 9697:2018); German version EN ISO 9697:2019
DIN EN ISO 9696:2018-04 Water quality - Gross alpha activity - Test method using thick source (ISO 9696:2017); German version EN ISO 9696:2017
DIN EN ISO 9698:2017-04 Water quality - Tritium - Test method using liquid scintillation counting (ISO/DIS 9698:2017); German and English version prEN ISO 9698:2017 / Note: Date of issue 2017-03-24*Intended as replacement for DIN EN ISO 9698 (2015-12).
DIN 50159-1:2022 Metallic materials - Hardness testing with the UCI method - Part 1: Test method
DIN SPEC 51458:2017-12 Testing of lubricants - Analysis of used greases - Requirements and test methods
DIN EN ISO 13163:2020-09 Water quality - Lead-210 - Test method using liquid scintillation counting (ISO 13163:2013); German version EN ISO 13163:2019 / Note: To be replaced by DIN EN ISO 13163 (in preparation).
DIN EN 13286-51:2005-03 Unbound and hydraulically bound mixtures - Part 51: Method for the manufacture of test specimens of hydraulically bound mixtures using vibrating hammer compaction; German version EN 13286-51:2004
DIN EN 60749-37:2008 Semiconductor devices - Mechanical and climatic test methods - Part 37: Board level drop test method using an accelerometer (IEC 60749-37:2008); German version EN 60749-37:2008
DIN EN ISO 9696:2018 Water quality - Gross alpha activity - Test method using thick source (ISO 9696:2017)
DIN EN ISO 24265:2021-02 Footwear - Test methods for uppers - Resistance to rubbing using a rubber strip (ISO 24265:2020); German version EN ISO 24265:2020
DIN 4573:2021-03 Seatings for persons with a higher user weight - Safety requirements and test methods / Note: Applies in conjunction with DIN 68877-2 (2016-05), DIN EN 581-2 (2017-01), DIN EN 1335-2 (2019-04), DIN EN 1729-2 (2016-03), DIN EN 16139 (2014-03).
DIN ISO 15375:2014-10 Medical infusion bottles - Suspension devices for multiple use - Requirements and test methods (ISO 15375:2010)
DIN EN 60749-40:2012-02 Semiconductor devices - Mechanical and climatic test methods - Part 40: Board level drop test method using a strain gauge (IEC 60749-40:2011); German version EN 60749-40:2011
DIN EN ISO 13164-2:2020-12 Water quality - Radon-222 - Part 2: Test method using gamma-ray spectrometry (ISO 13164-2:2013); German version EN ISO 13164-2:2020
DIN EN 16005:2020 Power operated pedestrian doorsets - Safety in use - Requirements and test methods; German and English version prEN 16005:2020
DIN EN 16005:2013-01 Power operated pedestrian doorsets - Safety in use - Requirements and test methods; German version EN 16005:2012 / Note: To be replaced by DIN EN 16005 (2020-11).
DIN EN 16005:2020-11 Power operated pedestrian doorsets - Safety in use - Requirements and test methods; German and English version prEN 16005:2020 / Note: Date of issue 2020-10-23*Intended as replacement for DIN EN 16005 (2013-01), DIN EN 16005 Berichtigung 1 (2015-10).
DIN EN 16005 Berichtigung 1:2015-10 Power operated pedestrian doorsets - Safety in use - Requirements and test methods; German version EN 16005:2012, Corrigendum to DIN EN 16005:2013-01; German version EN 16005:2012/AC:2015 / Note: To be replaced by DIN EN 16005 (2020-11).

British Standards Institution (BSI), How to use the test hammer

BS EN 14231:2003 Natural stone test methods - Determination of the slip resistance by means of the pendulum tester
BS EN 60749-37:2008 Semiconductor devices — Mechanical and climatic test methods — Part 37: Board level drop test method using an accelerometer
BS 3900-A20:1998 Methods of test for paints. Determination of density by the immersed body (plummet) method
BS EN ISO 13165-2:2022 Water quality. Radium-226 - Test method using emanometry
BS EN ISO 13164-3:2020 Water quality. Radon-222 - Test method using emanometry
BS EN ISO 13161:2020 Water quality. Polonium 210. Test method using alpha spectrometry
BS ISO 20899:2018 Water quality. Plutonium and neptunium. Test method using ICP-MS
BS ISO 13164-3:2013 Water quality. Radon-222. Test method using emanometry
BS EN 60749-40:2011 Semiconductor devices. Mechanical and climatic test methods. Board level drop test method using a strain gauge
BS 4140-24:1987 Methods of test for aluminium oxide. Determination of fine particle size distribution (method using electroformed sieves)
BS ISO 13166:2020 Water quality. Uranium isotopes. Test method using alpha-spectrometry
BS EN 12600:2002(2010) Glass in building. Pendulum test. Impact test method and classification for flat glass
BS EN ISO 13164-2:2020 Water quality. Radon-222 - Test method using gamma-ray spectrometry
22/30441351 DC BS ISO 4723. Water quality. Actinium-227. Test method using alpha-spectrometry
23/30435269 DC BS ISO 4717. Water quality. Protactinium-231. Test method using ICP-MS
22/30429483 DC BS ISO 4685. Water quality. Radium 226. Test method using ICP-MS
23/30435266 DC BS ISO 4702. Water quality. Zirconium 93. Test method using ICP-MS
BS ISO 23655-2:2022 Water quality. Nickel-59 and nickel-63 - Test method using ICP-MS
BS EN ISO 28927-6:2010 Hand-held portable power tools. Test methods for evaluation of vibration emission. Rammers
BS EN ISO 28927-6:2009 Hand-held portable power tools - Test methods for evaluation of vibration emission - Rammers
19/30377336 DC BS EN ISO 13161. Water quality. Polonium 210. Test method using alpha spectrometry
PD IEC/TR 62697-3:2018 Test methods for quantitative determination of corrosive sulfur compounds in unused and used insulating liquids. Test method for quantitative determination of elemental sulfur
BS 4140-8:1986 Methods of test for aluminium oxide. Determination of absolute density using a pyknometer
BS EN ISO 13163:2022 Water quality — Lead-210 — Test method using liquid scintillation counting
BS EN ISO 22125-1:2019 Water quality. Technetium-99 - Test method using liquid scintillation counting
BS EN ISO 13165-1:2020 Water quality. Radium-226. Test method using liquid scintillation counting
BS ISO 13169:2018 Water quality. Uranium. Test method using alpha liquid scintillation counting
BS EN ISO 22515:2021 Water quality. Iron-55. Test method using liquid scintillation counting
BS 6696:1986 Methods for use and testing of capacity of volumetric glassware
BS EN 16280:2012 Breath alcohol test devices for general public. Requirements and test methods
PD IEC/TR 62697-2:2018 Test methods for quantitative determination of corrosive sulfur compounds in unused and used insulating liquids. Test method for quantitative determination of total corrosive sulfur (TCS)
21/30429612 DC BS EN ISO 13165-2. Water quality. Radium-226. Part 2. Test method using emanometry
BS ISO 21283:2018 Iron ores. Determination of specific surface area. Test method using air-permeability apparatus (Blaine)
BS EN ISO 28927-11:2011 Hand-held portable power tools. Test methods for evaluation of vibration emission. Stone hammers
PD 6682-9:2003 Aggregates. Guidance on the use of European test method standards
BS ISO 16525-6:2014 Adhesives. Test methods for isotropic electrically conductive adhesives. Determination of pendulum-type shear impact
BS EN ISO 13165-3:2020 Water quality. Radium-226. Test method using coprecipitation and gamma-spectrometry
BS EN IEC 60068-2-82:2019 Tracked Changes. Environmental testing. Tests. Test Xw1: Whisker test methods for components and parts used in electronic assemblies
BS 1796-1:1989 Test sieving. Methods using test sieves of woven wire cloth and perforated metal plate
BS EN ISO 4787:2011 Laboratory glassware. Volumetric instruments. Methods for testing of capacity and for use
22/30438655 DC BS EN ISO 13167. Water quality. Plutonium, americium, curium and neptunium. Test method using alpha spectrometry
PD ISO/TS 20282-2:2013 Usability of consumer products and products for public use. Summative test method
BS 6043-4.1:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Methods of sampling
BS ISO 18869:2017 Tracked Changes. Hydraulic fluid power. Test methods for couplings actuated with or without tools

AENOR, How to use the test hammer

UNE 57152-2:1990 PAPER AND BOARD. DETERMINATION OF RESISTANCE TO PICKING. ACCELERATING SPEED METHOD USING THE IGT TESTER. (PENDULUM OR SPRING MODEL)
UNE-EN 14231:2004 Natural stone test methods - Determination of the slip resistance by means of the pendulum tester
UNE-EN 13036-4:2012 Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test
UNE 21795:1996 TEST METHOD FOR EVALUATING THERMAL ENDURANCE OF FLEXIBLE SHEET MATERIALS USING THE WRAPPED TUBE METHOD.
UNE-EN 13286-51:2006 Unbound and hydraulically bound mixtures - Part 51: Method for the manufacture of test specimens of hydraulically bound mixtures using vibrating hammer compaction
UNE-EN 15964:2012 Breath alcohol test devices other than single use devices - Requirements and test methods

European Committee for Standardization (CEN), How to use the test hammer

EN 14231:2003 Natural stone test methods - Determination of the slip resistance by means of the pendulum tester
EN 13036-4:2003 Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface - The pendulum test
EN ISO 13164-3:2020 Water quality - Radon-222 - Part 3: Test method using emanometry (ISO 13164-3:2013)
prEN ISO 13165-2:2021 Water quality - Radium-226 - Part 2: Test method using emanometry (ISO/DIS 13165-2:2021)
EN 15964:2011 Breath alcohol test devices other than single use devices - Requirements and test methods
CWA 18014:2023 Mediation Grammar - A testing methodology for measuring the empowerment of users of public services for migrants

Canadian General Standards Board （CGSB), How to use the test hammer

CAN/CGSB-4.2 NO.12.3-2005 Textile test methods Textiles - Tear properties of fabrics - Part 1: Determination of tear force using ballistic pendulum method (Elmendorf)
CAN/CGSB-3.0 NO.14.3-2016 Methods of testing petroleum and associated products Standard test method for the identification of components in automotive gasoline using gas chromatography

未注明发布机构, How to use the test hammer

BS 1881-202:1986(1998) Testing concrete — Part 202 : Recommendations for surface hardness testing by rebound hammer
BS EN 16005:2012(2015) Power operated pedestrian doorsets — Safety in use — Requirements and test methods

Danish Standards Foundation, How to use the test hammer

DS/EN 14231:2003 Natural stone test methods - Determination of the slip resistance by means of the pendulum tester
DS/EN 13286-51:2005 Unbound and hydraulically bound mixtures – Part 51: Method for the manufacture of test specimens of hydraulically bound mixtures using vibrating hammer compaction
DS/EN 13036-4:2012 Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test
DS/ISO 9854-1:1999 Thermoplastics pipes for the transport of fluids - Determination of pendulum impact strength by the Charpy method - Part 1: General test method
DS/EN 60749-40:2011 Semiconductor devices - Mechanical and climatic test methods - Part 40: Board level drop test method using a strain gauge
DS/EN 15964:2011 Breath alcohol test devices other than single use devices - Requirements and test methods

Lithuanian Standards Office , How to use the test hammer

LST EN 14231-2004 Natural stone test methods - Determination of the slip resistance by means of the pendulum tester
LST EN ISO 13161:2020 Water quality - Polonium 210 - Test method using alpha spectrometry (ISO 13161:2020)
LST EN 13036-4-2012 Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test
LST EN 13286-51-2005 Unbound and hydraulically bound mixtures - Part 51: Method for the manufacture of test specimens of hydraulically bound mixtures using vibrating hammer compaction
LST EN 15964-2011 Breath alcohol test devices other than single use devices - Requirements and test methods

IN-BIS, How to use the test hammer

Standard Association of Australia （SAA）, How to use the test hammer

AS/NZS 2512.3.2:1997 Methods of testing protective helmets - Determination of impact energy attenuation - Striker drop test
AS 2001.2.8:2001 Methods of test for textiles - Physical tests - Determination of tear force of fabrics using the ballistic pendulum method (Elmendorf)
AS/NZS 4347.6:1995 Damp-proof courses and flashings - Methods of test - Determining impact resistance (falling dart impact test)
AS 1141.42:1999 Methods for sampling and testing aggregates - Pendulum friction test
AS 2083:2005 Calibration blocks and their methods of use in ultrasonic testing
AS/NZS 4453.2:1997 Protective clothing for users of hand-held chainsaws - Test methods for leg protectors
AS 1334.2A:1984 Methods of testing conveyor and elevator belting - Determination of thickness of cover using an optical magnifier
AS 1289.6.7.3:2016 Methods of testing soils for engineering purposes, Method 6.7.3: Soil strength and consolidation tests-Determination of permeability of a soil-Constant head method using a flexible wall permeameter

International Organization for Standardization (ISO), How to use the test hammer

ISO 3782:1980 Paper and board — Determination of resistance to picking — Accelerating speed method using the IGT tester (Pendulum or spring model)
ISO/CD 4721 Water quality - Strontium 90 – Test method using ICP/MS
ISO/DIS 4717 Water quality — Protactinium-231 — Test method using ICP-MS
ISO/DIS 4685 Water quality — Radium 226 — Test method using ICP-MS
ISO/FDIS 4685:2023 Water quality — Radium 226 — Test method using ICP-MS
ISO/DIS 4721:2011 Water quality — Strontium 90 – Test method using ICP/MS
ISO/FDIS 4723:2023 Water quality — Actinium-227 — Test method using alpha-spectrometry
ISO 20899:2018 Water quality — Plutonium and neptunium — Test method using ICP-MS
ISO 9697:2018 Water quality — Gross beta activity — Test method using thick source
ISO 13166:2020 Water quality — Uranium isotopes — Test method using alpha-spectrometry
ISO/FDIS 4722-1 Water quality — Thorium 232 — Part 1: Test method using alpha spectrometry
ISO 4722-1:2011 Water quality — Thorium 232 — Part 1: Test method using alpha spectrometry
ISO/DIS 4722-2 Water quality — Thorium 232 — Part 2: Test method using ICP/MS
ISO 21755-1:2019 Motorcycles — Measurement method for evaporative emissions — Part 1: SHED test procedure
ISO 13164-3:2013 Water quality.Radon-222 .Part 3: Test method using emanometry
ISO 13167:2015 Water quality — Plutonium, americium, curium and neptunium — Test method using alpha spectrometry
ISO/DIS 23548:2011 Measurement of radioactivity — Alpha emitting radionuclides — Generic test method using alpha spectrometry
ISO/FDIS 20045 Measurement of the radioactivity in the environment – Air: tritium – Test Method using bubbler sampling
ISO 20045 Measurement of the radioactivity in the environment – Air: tritium – Test Method using bubbler sampling
ISO 20045:2023 Measurement of the radioactivity in the environment — Air: tritium — Test method using bubbler sampling

SG-SPRING SG, How to use the test hammer

SS 323 Pt.C2-1987 Methods Of Test For Flexible Plastic Packaging Materials Part C2 : Determination Of Impact Resistance (By Falling Weight Method)

Indonesia Standards, How to use the test hammer

SNI 05-6437-2000 Performance test methods for pumps using test models
SNI 08-6330.2-2000 Test methods for stretch properties of knitted fabrics having low power
SNI 03-0450-1989 Test method for reactive alkaline properties of cement with concrete aggregates using stirring rod.
SNI 4427-2008 Testing methods of hardness surface frictional properties using British Pendulum Tester (BPT)

CU-NC, How to use the test hammer

NC 26-140-1985 Drugs. Determination of Water by Karl Fisoher Method Testing Method

Association Francaise de Normalisation, How to use the test hammer

NF EN 13036-4:2012 Caractéristiques de surface des routes et aérodromes - Méthode d'essai - Partie 4 : méthode d'essai pour mesurer l'adhérence d'une surface : l'essai au pendule
NF M60-831*NF ISO 20899:2018 Water quality - Plutonium and neptunium - Test method using ICP-MS
NF M60-816*NF EN ISO 9697:2019 Water quality - Gross beta activity - Test method using thick source
NF M60-815*NF EN ISO 9696:2017 Water quality - Gross alpha activity - Test method using thick source
NF EN 50375:2002 Méthodologie d'essai des moyens de nettoyage utilisés dans les huiles isolantes à usages électriques
NF M60-830*NF ISO 13167:2016 Water quality - Plutonium, americium, curium and neptunium - Test method using alpha spectrometry
NF E25-080:2005 Broches simples utilisées dans les magasins - Exigences de sécurité et méthode d'essai
NF EN ISO 787-10:1995 Méthodes générales d'essai des pigments et matières de charge - Partie 10 : détermination de la masse volumique - Méthode utilisant un pycnomètre.
NF M60-832*NF ISO 13169:2019 Water quality - Uranium - Test method using alpha liquid scintillation counting
NF M60-837*NF EN ISO 22515:2021 Water quality - Iron-55 - Test method using liquid scintillation counting
NF M60-809*NF EN ISO 13163:2022 Water quality - Lead-210 - Test method using liquid scintillation counting
NF EN ISO 11468:1999 Plastiques - Préparation des pâtes PVC pour essai - Méthode utilisant un dispositif pour dissolution
NF EN IEC 63136:2019 Lave-vaisselle électriques à usage collectif - Méthodes d'essai et de mesure de l'aptitude à la fonction
NF M60-761-3:2013 Water quality - Radon-222 - Part 3: test method using emanometry
NF EN 60749-40:2012 Dispositifs à semiconducteurs - Méthodes d'essais mécaniques et climatiques - Partie 40 : méthode d'essai de chute au niveau de la carte avec utilisation d'une jauge de contrainte
NF EN 16005:2012 Blocs-portes motorisés pour piétons - Sécurité d'utilisation - Exigences et méthodes d'essai
NF EN ISO 4612:2018 Plastiques - Préparation des pâtes PVC pour essais - Méthodes utilisant un mélangeur planétaire
NF EN 60705:2015 Fours à micro-ondes à usage domestique - Méthodes de mesure de l'aptitude à la fonction
NF EN 60705/A2:2018 Fours à micro-ondes à usage domestique - Méthodes de mesure de l'aptitude à la fonction

CZ-CSN, How to use the test hammer

CSN 70 4101-1989 Laboratory glassware. Principles of volumetric glass utilization
CSN 35 6853-1982 Vibration. Means for testing hammers powered pneumatically electrically or by combustion engine.

US-General Services, How to use the test hammer

General Services FED-STD-834-2007 PERFORMANCE TEST METHOD FOR INTENSIVE USE CHAIRS

RU-GOST R, How to use the test hammer

GOST R IEC 60745-2-6-2007 Hand-held motor-operated electric tools. Safety and test methods. Part 2-6. Particular requirements for hammers and rotary hammers
GOST R 50289-1992 Hollow insulators for use in electrical equipment. Test methods
GOST R 59594-2021 Soils. Field test methods with the use of resistivity cone penetration
GOST 30147-1995 Dishwashers for household use. Methods for measuring the performance

IT-UNI, How to use the test hammer

UNI EN ISO 13161:2020 Water quality - Polonium 210 - Test method using alpha spectrometry
UNI EN ISO 22515:2021 Water quality - Iron-55 - Test method using liquid scintillation counting
UNI EN ISO 13162:2021 Water quality - Carbon 14 - Test method using liquid scintillation counting
UNI 7520-1976
UNI 7519-1976

ES-UNE, How to use the test hammer

UNE-EN ISO 13161:2020 Water quality - Polonium 210 - Test method using alpha spectrometry (ISO 13161:2020) (Endorsed by Asociación Española de Normalización in October of 2020.)
UNE 41250-3:2016 Test methods for measurement of pavement deflection. Part 3: Falling weight deflectometer
UNE-EN ISO 13165-2:2022 Water quality - Radium-226 - Part 2: Test method using emanometry (ISO 13165-2:2022) (Endorsed by Asociación Española de Normalización in December of 2022.)
UNE-EN ISO 13164-3:2020 Water quality - Radon-222 - Part 3: Test method using emanometry (ISO 13164-3:2013) (Endorsed by Asociación Española de Normalización in March of 2020.)
UNE-EN ISO 9697:2019 Water quality - Gross beta activity - Test method using thick source (ISO 9697:2018) (Endorsed by Asociación Española de Normalización in August of 2019.)
UNE-EN ISO 9696:2018 Water quality - Gross alpha activity - Test method using thick source (ISO 9696:2017)
UNE-EN ISO 9698:2019 Water quality - Tritium - Test method using liquid scintillation counting (ISO 9698:2019) (Endorsed by Asociación Española de Normalización in July of 2019.)
UNE-EN ISO 22515:2021 Water quality - Iron-55 - Test method using liquid scintillation counting (ISO 22515:2021) (Endorsed by Asociación Española de Normalización in July of 2021.)
UNE-EN ISO 13163:2022 Water quality - Lead-210 - Test method using liquid scintillation counting (ISO 13163:2021) (Endorsed by Asociación Española de Normalización in April of 2022.)
UNE-EN ISO 13162:2021 Water quality - Carbon 14 - Test method using liquid scintillation counting (ISO 13162:2021) (Endorsed by Asociación Española de Normalización in July of 2021.)
UNE-EN ISO 24265:2021 Footwear - Test methods for uppers - Resistance to rubbing using a rubber strip (ISO 24265:2020)
UNE-EN 60749-40:2011 Semiconductor devices - Mechanical and climatic test methods - Part 40: Board level drop test method using a strain gauge (Endorsed by AENOR in November of 2011.)
UNE-EN ISO 13164-2:2020 Water quality - Radon-222 - Part 2: Test method using gamma-ray spectrometry (ISO 13164-2:2013) (Endorsed by Asociación Española de Normalización in March of 2020.)
UNE-EN ISO 16852:2017 Flame arresters - Performance requirements, test methods and limits for use (ISO 16852:2016)
UNE-EN 16005:2013/AC:2015 Power operated pedestrian doorsets - Safety in use - Requirements and test methods
UNE-EN IEC 60068-2-82:2019 Environmental testing - Part 2-82: Tests - Test XW1: Whisker test methods for components and parts used in electronic assemblies (Endorsed by Asociación Española de Normalización in August of 2019.)

American National Standards Institute （ANSI), How to use the test hammer

ANSI/ASTM E208:1995 Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels
ANSI/ASTM D5628:2001 Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Weight) (08.03)
ANSI/ASTM D2444:1999 Test Method For Determination Of The Impact Resistance Of Thermoplastic Pipe And Fittings By Means Of A Tup Falling Weight
ANSI/ASTM D4495:2012 Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight
ANSI/ASTM F1720:2006 Test Method for Measuring the Thermal Insulation of Sleeping Bags Using a Heated Manikin

(U.S.) Ford Automotive Standards, How to use the test hammer

FORD FLTM AA 101-04-2000 DETERMINATION OF CARBON GRADIENT USING TEST BARS
FORD FLTM AA 101-03-2000 DETERMINATION OF CARBON POTENTIAL USING SHIM STOCK

GM Europe, How to use the test hammer

GME 60204-2011

GOSTR, How to use the test hammer

GOST R 58767-2019 Mortars. Test methods using reference specimens
GOST R 58888-2020 Soils. Field test method with the use of cone penetration with temperature measurement
GOST 34583-2019 Lifts. Rules and methods of tests, measurements and checking in exploitation period

AT-ON, How to use the test hammer

ONORM DIN 19261-1981
OENORM EN ISO 13161:2021 Water quality - Polonium 210 - Test method using alpha spectrometry (ISO 13161:2020)
OENORM EN ISO 13165-2:2021 Water quality - Radium-226 - Part 2: Test method using emanometry (ISO/DIS 13165-2:2021)

TR-TSE, How to use the test hammer

TS 1123-1972 PARAFORMALDEHYDE FOR INDUSTRIAL USE METHODS OF TEST
TS 753-1969 FORMIC ACID FOR INDUSTRIAL USE METHODS OF TEST

KR-KS, How to use the test hammer

KS R ISO 3006-2018 Road vehicles — Passenger car wheels for road use — Test methods

International Electrotechnical Commission (IEC), How to use the test hammer

IEC PAS 62050:2004 Board level drop test method of components for handheld electronic products
IEC 60749-37:2008 Semiconductor devices - Mechanical and climatic test methods - Part 37: Board level drop test method using an accelerometer
IEC TR 62697-3:2018 Test methods for quantitative determination of corrosive sulfur compounds in unused and used insulating liquids - Part 3: Test method for quantitative determination of elemental sulfur
IEC 62535:2008 Insulating liquids - Test method for detection of potentially corrosive sulphur in used and unused insulating oil

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, How to use the test hammer

GB/T 15099-1994 Test methods for mechanical shock fragility of products, using shock machines
GB/T 9391-1988 Shipborne radar,technical and operational requirements, Mcthod of testing and required test results

BE-NBN, How to use the test hammer

NBN G 51-002-1990 Textiles - Evaluation of maturity of cotton fibres - Air flow method

CH-SNV, How to use the test hammer

SN EN ISO 13161:2021 Water quality - Polonium 210 - Test method using alpha spectrometry (ISO 13161:2020)

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, How to use the test hammer

JEDEC JESD94B-2015 Application Specific Qualification Using Knowledge Based Test Methodology

Malaysia Standards, How to use the test hammer

MS 133 Pt.E5-2000 Methods of test for paints and varnishes:Part E5:Pendulum damping test (First revision)(ISO 1522:1998,MOD)

GM Daewoo, How to use the test hammer

GMKOREA EDS-T-7904-2011

International Telecommunication Union (ITU), How to use the test hammer

ITU-T P.806-2014 A subjective quality test methodology using multiple rating scales
ITU-T P.502-2000 Objective Test Methods for Speech Communication Systems Using Complex Test Signals Series P: Telephone Transmission Quality Telephone Installations Local Line Networks Objective Measuring Apparatus Study Group 12
ITU-T P.502 ERRATUM 1-2001 Objective test methods for speech communication systems using complex test signals; Erratum 1

Society of Automotive Engineers (SAE), How to use the test hammer

SAE J1610-1992 TEST METHOD FOR EVALUATING THE SEALING CAPABILITY OF HOSE CONNECTIONS WITH A PVT TEST FACILITY

Professional Standard - Petroleum, How to use the test hammer

SY/T 5281-2000 Bottle test method for the demulsification performance of crude oil demulsifiers

US-FCR, How to use the test hammer

FCR COE CRD-C 53-01-2001 TEST METHOD FOR CONSISTENCY OF NO-SLUMP CONCRETE USING THE MODIFIED VEBE APPARATUS

Professional Standard - Textile, How to use the test hammer

FZ/T 80007.2-2006 Wet wash resistance test method for garments used adhesive interlining
FZ/T 80007.3-2006 Dry wash resistance test method for garments used adhesive interlining
FZ/T 80007.2-1999 Test method for washing resistance of garments using fusible interlining
FZ/T 80007.3-1999 Test method for dry cleaning resistance of garments using fusible interlining
FZ/T 80007.1-1999 Test method for peel strength of garments using fusible interlinings

中国轻工总会, How to use the test hammer

ZBY 75018-1989 Test method for dry cleaning resistance of garments using fusible linings
ZBY 75017-1989 Test method for washing resistance of garments using fusible linings
ZBY 75016-1989 Test method for stiffness of garments using fusible interlinings
ZBY 75015-1989 Test method for peel strength of garments using adhesive linings

NZ-SNZ, How to use the test hammer

NZS 4402.4.1.3:1986 Methods of Testing Soils for Civil Engineering Purposes Part 4.1: Soil Compaction Tests - Determination of the Dry Density/Water Content Relationship Test 4.1.3: New Zealand Vibrating Hammer Compaction Test
NZS 4407.4.2.1:1991 Methods of sampling and testing road aggregates Test 4.2.1 Method using a nuclear surface moisture-density gauge - Direct transmission mode
NZS 4407.4.2.2:1991 Methods of sampling and testing road aggregates Test 4.2.2 Method using a nuclear surface moisture-density gauge - Backscatter mode

NEMA - National Electrical Manufacturers Association, How to use the test hammer

NEMA XR 8-1979 Test Methods for Diagnostic X-Ray Machines for Use During Initial Installation

TH-TISI, How to use the test hammer

TIS 121.18-2010 Standard test methods for textiles.part 18: determination of tear force of fabrics using ballistic pendulum method (elmendorf)

ES-AENOR, How to use the test hammer

UNE 115-215-1991 Earth moving machinery. Operation and maintenance. Training of mechanics

European Committee for Electrotechnical Standardization（CENELEC）, How to use the test hammer

EN 60749-40:2011 Semiconductor devices - Mechanical and climatic test methods - Part 40: Board level drop test method using a strain gauge

ETSI - European Telecommunications Standards Institute, How to use the test hammer

ETR 022-1993 Advanced Testing Methods (ATM); Vocabulary of Terms Used in Communication Protocols Conformance Testing

BR-ABNT, How to use the test hammer

ABNT P-MB-325-1963

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., How to use the test hammer

ASHRAE 203-2014 Method of Test for Determining Heat Gain of Office Equipment Used in Buildings
ASHRAE 203-2018 Method of Test for Determining Heat Gain of Office Equipment Used in Buildings

YU-JUS, How to use the test hammer

JUS N.N6.373-1987 Radiocommunicaions .Methods of measurement for television transmitters and transposers employing insertino Test signals.Filters use in measurement

ZA-SANS, How to use the test hammer

SANS 60811-1-3:2001 Common test methods for insulating and sheathing materials of electric and optical cables Part 1-3: General application - Methods for determining the density - Water absorption tests - Shrinkage test