ZH
RU
ES

eds determination basis

eds determination basis, Total:63 items.

In the international standard classification, eds determination basis involves: Fuels, Coals, Soil quality. Pedology, Construction materials, Products of the chemical industry, Milk and milk products, Quality, Aerospace engines and propulsion systems, Fertilizers, Adhesives, Radiation protection, Aircraft and space vehicles in general, Internal combustion engines, Road vehicle systems, Rubber, Electricity. Magnetism. Electrical and magnetic measurements, Insulating materials, Analytical chemistry, Software development and system documentation, Ceramics, Mechanical structures for electronic equipment, Open systems interconnection (OSI), Plastics, Non-ferrous metals, Measurement of fluid flow, Protective equipment, Furniture.

CZ-CSN, eds determination basis

• CSN 50 0368-1990 Paper and board tcsting. Determination of resistance to picking aecording to IGT
• CSN 44 1346-1987 Solid fuels. Determination of types of hard coals according to reflectance
• CSN 66 8028-1973 Stability lot according to Bergmann-.Junk
• CSN 66 8102 Cast.30-1978 Smokeless powders. Methods of testing. Stability test according to Bergmann-Junk

PL-PKN, eds determination basis

• PN B12038-06-1987 Ceramic tiles Determination of scratch hardness of surface according to Mohs
• PN C99465 ArkusZ14-1974 Methods for determination of pho- tographic values of light sensitive materials Determination of maximum and li- mits ranges of spectral sensivity for materials irradiated by means of visible radiation

Association Francaise de Normalisation, eds determination basis

• NF U42-142*NF EN 15476:2009 Fertilizers - Determination of nitric and ammoniacal nitrogen according to Devarda

VN-TCVN, eds determination basis

• TCVN 6648-2000 Soil quality.Determination of dry matter and water content on a mass basis.Gravimetric method

German Institute for Standardization, eds determination basis

• DIN ISO 11465:1996 Soil quality - Determination of dry matter and water content on a mass basis - Gravimetric method (ISO 11465:1993)
• DIN 53529-2:1983 Testing of rubber and elastomers; measurement of vulcanization characteristics (curometry); evaluation of cross-linking isotherms in terms of reaction kinetics
• DIN ISO 22309:2015 Microbeam analysis - Quantitative analysis using energy-dispersive spectrometry (EDS) for elements with an atomic number of 11 (Na) or above (ISO 22309:2011)

SE-SIS, eds determination basis

• SIS SS-ISO 2372:1985 Vibration and shock - Basis for specifying evaluation of vibration

HU-MSZT, eds determination basis

• MSZ 7095-1959

Standard Association of Australia （SAA）, eds determination basis

• AS 4459.1:1999 Methods of sampling and testing ceramic tiles - Sampling and basis for acceptance
• AS/NZS 4688.4:2000 Furniture - Fixed height chairs - Determination of stability - Chairs with tilting or reclining mechanisms when fully reclined and rocking chairs

RO-ASRO, eds determination basis

• STAS 9869/10-1976 RUBBER THREADS Determination of threads adherence in bunch
• STAS 6679/10-1985 Metal cutting machine-tools CHECK METHOD OF THE ROTA- TION AXIS EQUIDISTANCE OF THE WORKING ELEMENT TO A REFERENCE BASIS

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., eds determination basis

• IEEE 1-1962 GENERAL PRINCIPLES UPON WHICH TEMPERATURE LIMITS ARE BASED IN THE RATING OF ELECTRIC EQUIPMENT

Professional Standard - Civil Aviation, eds determination basis

• AP-21-08-1994 Certification and Surveillance Procedures for Production Based on Type Certificates Only

Korean Agency for Technology and Standards (KATS), eds determination basis

• KS F 2737-2005 Testing method for chloride ion penetration of concrete by using indicator
• KS M ISO 19212:2010 dhesives--Determination of temperature dependence of shear strength
• KS M ISO 19212-2014(2019) Adhesives — Determination of temperature dependence of shear strength
• KS M ISO 19212:2014 Adhesives — Determination of temperature dependence of shear strength
• KS D ISO 22309:2011 Microbeam analysis-Quantitative analysis using energy-dispersive spectrometry(EDS)
• KS R ISO 14396:2006 Reciprocating internal combustion engines-Determination and method for the measurement of engine power-Additional requirements for exhaust emission tests in accordance with ISO 8178

European Committee for Standardization (CEN), eds determination basis

• EN ISO 14891:2002 Milk and Milk Products - Determination of Nitrogen Content - Routine Method Using Combustion According to the Dumas Principle
• EN ISO 20785-1:2020 Dosimetry for exposures to cosmic radiation in civilian aircraft - Part 1: Conceptual basis for measurements (ISO 20785-1:2020)
• PD CEN/TR 10317:2014 European certified reference materials (EURONORM-CRMs) for the determination of the chemical composition of iron and steel products prepared under the auspices of the European Committee for Iron and Steel Standardization (ECISS)
• EN ISO 4869-4:2000 Acoustics - Hearing Protectors - Part 4: Measurement of Effective Sound Pressure Levels for Level-Dependent Sound-Restoration Ear-Muffs ISO/TR 4869-4:1998

Institute of Electrical and Electronics Engineers (IEEE), eds determination basis

• AIEE No.1-1962 (Supersedes June 1957 issue) AIEE General Principles Upon Which Temperature Limits Are Based in the rating of Electric Equipment

RU-GOST R, eds determination basis

• GOST R 50779.21-2004 Statistical methods. Determination rules and methods for calculation of statistical characteristics based on sample data. Part 1. Normal distribution
• GOST R 50779.21-1996 Statistical methods. Determination rules and methods for calculation of statistical characteristics based on sample data. Part 1. Normal distribution
• GOST ISO 14396-2015 Reciprocating internal combustion engines. Determination and method for the measurement of engine power. Additional requirements for exhaust emission tests in accordance with ISO 8178
• GOST R ISO 22309-2015 State system for insuring the uniformity of measurements. Microbeam analysis. Quantitative analysis using energy-dispersive spectrometry (EDS) for elements with an atomic number of 11 (Na) or above

US-CFR-file, eds determination basis

• CFR 42-440.1-2014 Public Health. Part440:Services: general provisions. Section440.1:Basis and purpose.
• CFR 16-305.7-2013 Commercial Practices. Part305:Energy and water use labeling for consumer products under the energy policy and conservation act ("energy labeling rule"). Section305.7:Determinations of capacity.

Society of Automotive Engineers (SAE), eds determination basis

• SAE AIR5020-1996 Time-Dependent In-Flight Thrust Determination
• SAE J2985-2014 Definition and Measurement of Transfer Case Speed-Dependent Parasitic Loss

British Standards Institution (BSI), eds determination basis

• BS DD CEN/TS 15559:2007 Fertilizers - Determination of nitric and ammoniacal nitrogen according to Arnd
• BS DD CEN/TS 15558:2007 Fertilizers - Determination of nitric and ammoniacal nitrogen according to Ulsch
• BS EN 15559:2009 Fertilizers - Determination of nitric and ammoniacal nitrogen according to Arnd
• BS ISO/IEC 8473-2:1998 Information technology - Protocol for providing the connectionless-mode network service - Provision of the underlying service by an ISO/IEC 8802 subnetwork

CU-NC, eds determination basis

• NC 27-18-1987 Surfactants. Ilumectant Power Determination. Testing Methods

Japanese Industrial Standards Committee (JISC), eds determination basis

• JIS K 6831:2003 Adhesives -- Determination of temperature dependence of adhesive bonds
• JIS B 8004:2005 Reciprocating internal combustion engines -- Determination and method for the measurement of engine power -- Additional requirements for exhaust emission tests in accordance with ISO 8178

CEN - European Committee for Standardization, eds determination basis

• EN ISO 20785-1:2017 Dosimetry for exposures to cosmic radiation in civilian aircraft - Part 1: Conceptual basis for measurements
• EN ISO 21304-1:2019 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 1: Designation system and basis for specifications

International Organization for Standardization (ISO), eds determination basis

• ISO 20785-1:2020 Dosimetry for exposures to cosmic radiation in civilian aircraft — Part 1: Conceptual basis for measurements
• ISO 22309:2011 Microbeam analysis - Quantitative analysis using energy-dispersive spectrometry (EDS) for elements with an atomic number of 11 (Na) or above
• ISO/IEC 14143-2:2002 Information technology - Software measurement; Functional size measurement - Part 2: Conformity evaluation of software size measurement methods to ISO/IEC 14143-1:1998
• ISO 14396:2002 Reciprocating internal combustion engines - Determination and method for the measurement of engine power - Additional requirements for exhaust emission tests in accordance with ISO 8178
• ISO 21304-1:2019 Plastics — Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials — Part 1: Designation system and basis for specifications

SAE - SAE International, eds determination basis

• SAE J2985-2019 Definition and Measurement of Transfer Case Speed-Dependent Parasitic Loss

International Electrotechnical Commission (IEC), eds determination basis

• IEC 112/193/CD:2011 Calibration of space charge measuring equipment based on pulsed electro-acoustic measurement principle
• IEC 112/206/DTS:2012 Calibration of space charge measuring equipment based on pulsed electro-acoustic measurement principle
• IEC 62610-2:2018 Mechanical structures for electrical and electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series - Part 2: Method for the determination of forced air cooling

American Society of Mechanical Engineers (ASME), eds determination basis

• ASME 2209-2001 Impact Tests per Paragraph UHA-51 for Glass Lined 316L Stainless Steel Vessels Section VIII, Division 1 ANNULLED

Taiwan Provincial Standard of the People's Republic of China, eds determination basis

• CNS 14313-1999 Method of test for particle size distribution of fine ceramic podwer by liquid photosedimentation method

Professional Standard - Aviation, eds determination basis

• HB 5219.21-1998 Determination of beryllium content by chromium cyanide R photometric method for chemical analysis of magnesium alloys

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, eds determination basis

• GB/T 6987.22-2001 Aluminium and aluminium alloys--Determination of beryllium content--SCR spectrophotometric method
• GB/T 13748.7-1992 Magnesium and its alloys--Determination of beryllium content--Solochrome cyanine R Spectrophotometric method
• GB/T 13748.11-2005 Chemical analysis methods of magnesium and magnesium alloys.Determination of beryllium content.Solochrome cyanine R spectrophotometric method

AENOR, eds determination basis

• UNE 9205:1987 BOILERS. GUIDANCE FOR DETERMINATION OF THE COMBUSTION DATA

Others:   Determination of mercury in water is based on, Mercury content determination basis, All silicon determination basis, Total Acidity Determination Basis, eds determination basis, Bulk density determination method based on, Permeability determination basis, Cod determination method based on, The basis for the determination of reducing sugar, eo is determined based on, What elements does eds measure, Determination of wavelength based on, Conductivity measurement basis, eds determination basis, Redox Potential Determination Basis, eds element determination, Redox Potential Determination Basis, Elemental Analysis Determination Basis, Determination basis of coke nitrogen content, Total nitrogen determination is based on the principle.