How to use scanning electron microscope

How to use scanning electron microscope, Total:131 items.

In the international standard classification, How to use scanning electron microscope involves: Linear and angular measurements, Optical equipment, Analytical chemistry, Physics. Chemistry, Mechanical testing, Non-ferrous metals, Construction materials, Optics and optical measurements, Paints and varnishes, Iron and steel products, Document imaging applications, Microprocessor systems, Ceramics, Air quality, Vocabularies, Television and radio broadcasting, Protection against crime, Thermodynamics and temperature measurements, Paint ingredients, Medical sciences and health care facilities in general, External sewage systems, Acoustics and acoustic measurements, Nuclear energy engineering, Elements of buildings, Textile fibres, Electromagnetic compatibility (EMC), Road vehicle systems, Lubricants, industrial oils and related products, Environmental testing.

International Organization for Standardization (ISO), How to use scanning electron microscope

ISO/TS 21383:2021 Microbeam analysis - Scanning electron microscopy - Qualification of the scanning electron microscope for quantitative measurements
ISO/TS 10798:2011 Nanotechnologies - Charaterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
ISO/WD TR 23683:2023 Surface chemical analysis — scanning probe microscopy — Guideline for experimental quantification of carrier concentration in semiconductor devices by using electric scanning probe microscopy
ISO 21466:2019 Microbeam analysis — Scanning electron microscopy — Method for evaluating critical dimensions by CD-SEM
ISO 18115-2:2010 Analyse chimique des surfaces — Vocabulaire — Partie 2: Termes utilisés en microscopie à sonde à balayage (Première édition)
ISO 12653-2:2000 Electronic imaging - Test target for the black-and-white scanning of office documents - Part 2: Method of use
ISO 16000-27:2014 Indoor air - Part 27: Determination of settled fibrous dust on surfaces by SEM (scanning electron microscopy) (direct method)
ISO 12653-2:2000/cor 1:2002 Electronic imaging - Test target for the black-and-white scanning of office documents - Part 2: Method of use; Technical Corrigendum 1
ISO 12653-3:2014 Electronic imaging - Test target for scanning of office documents - Part 3: Test target for use in lower resolution applications
ISO 21915-1:2020 Textiles — Qualitative and quantitative analysis of some cellulose fibres (lyocell, cupro) and their blends — Part 1: Fibre identification using scanning electron microscopy and spectral analysis meth

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, How to use scanning electron microscope

GB/T 16594-1996 Micron grade lenght measurement by SEM
GB/T 17722-1999 Gold-plated thickness measurement by SEM
GB/T 16594-2008 General rules for measurement of length in micron scale by SEM
GB/T 20307-2006 General rules for nanometer-scale length measurement by SEM
GB/T 17362-2008 Scanning electron microscope X-ray energy spectrum analysis method for gold products
GB/T 17362-1998 Nondestructive method of X-ray EDS analysis with SEM for gold jewelry
GB/T 25189-2010 Microbeam analysis.Determination method for quantitative analysis parameters of SEM-EDS
GB/T 28873-2012 General guide of environmental scanning electron microscopy for biological effectes on topography induced by nanoparticles
GB/T 20493.2-2006 Electronic imaging. Test target for the black-and-white scanning of office documents. Part 2: Method of use

British Standards Institution (BSI), How to use scanning electron microscope

18/30319114 DC BS ISO 20171. Microbeam analysis. Scanning electron microscopy. Tagged image file format for Scanning electron microscopy(TIFF/SEM)
BS ISO 18115-2:2021 Surface chemical analysis. Vocabulary - Terms used in scanning-probe microscopy
BS ISO 21466:2019 Microbeam analysis. Scanning electron microscopy. Method for evaluating critical dimensions by CDSEM
BS ISO 12653-2:2000 Electronic imaging - Test target for the black-and-white scanning of office documents - Method of use
BS ISO 12653-2:2001 Electronic imaging. Test target for the black-and-white scanning of office documents. Method of use
18/30344520 DC BS ISO 21466. Microbeam analysis. Scanning electron microscopy. Method for evaluating critical dimensions by CD-SEM
BS ISO 11952:2019 Surface chemical analysis. Scanning-probe microscopy. Determination of geometric quantities using SPM: Calibration of measuring systems
BS ISO 21222:2020 Surface chemical analysis. Scanning probe microscopy. Procedure for the determination of elastic moduli for compliant materials using atomic force microscope and the two-point JKR method
19/30351707 DC BS ISO 21222. Surface chemical analysis. Scanning probe microscopy. Procedure for the determination of elastic moduli for compliant materials using atomic force microscope and the two-point JKR method
12/30265696 DC BS ISO 18115-2 AMD1. Surface chemical analysis. Vocabulary. Part 2. Terms used in scanning-probe microscopy
DD ISO/TS 10798:2011 Nanotechnologies. Characterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
BS ISO 12653-3:2014 Electronic imaging. Test target for scanning of office documents. Test target for use in lower resolution applications
12/30228339 DC BS ISO 16000-27. Indoor air. Part 27. Determination of settled fibrous dust on surfaces by SEM (scanning electron microscopy) (direct method)
15/30322265 DC BS EN 3475-414. Aerospace series. Cables, electrical, aircraft use. Test methods. Part 414. Differential scanning calorimeter (DSC test)
BS ISO 21915-1:2020 Textiles. Qualitative and quantitative analysis of some cellulose fibres (lyocell, cupro) and their blends - Fibre identification using scanning electron microscopy and spectral analysis methods
BS DD ISO/TS 10798:2011 Nanotechnologies. Characterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis

American Society for Testing and Materials (ASTM), How to use scanning electron microscope

ASTM E766-14 Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope
ASTM B748-90(1997) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
ASTM B748-90(2006) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
ASTM C1723-16(2022) Standard Guide for Examination of Hardened Concrete Using Scanning Electron Microscopy
ASTM C1723-10 Standard Guide for Examination of Hardened Concrete Using Scanning Electron Microscopy
ASTM C1723-16 Standard Guide for Examination of Hardened Concrete Using Scanning Electron Microscopy
ASTM E2809-13 Standard Guide for Using Scanning Electron Microscopy/X-Ray Spectrometry in Forensic Paint Examinations
ASTM E2142-08(2015) Standard Test Methods for Rating and Classifying Inclusions in Steel Using the Scanning Electron Microscope
ASTM E2142-08 Standard Test Methods for Rating and Classifying Inclusions in Steel Using the Scanning Electron Microscope
ASTM E2142-08(2023) Standard Test Methods for Rating and Classifying Inclusions in Steel Using the Scanning Electron Microscope
ASTM E766-14e1 Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope
ASTM E2142-01 Standard Test Methods for Rating and Classifying Inclusions in Steel Using the Scanning Electron Microscope
ASTM B748-90(2021) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
ASTM F1438-93(2012) Standard Test Method for Determination of Surface Roughness by Scanning Tunneling Microscopy for Gas Distribution System Components
ASTM B748-90(2016) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
ASTM E2090-06 Standard Test Method for Size-Differentiated Counting of Particles and Fibers Released from Cleanroom Wipers Using Optical and Scanning Electron Microscopy
ASTM E2090-12(2020) Standard Test Method for Size-Differentiated Counting of Particles and Fibers Released from Cleanroom Wipers Using Optical and Scanning Electron Microscopy
ASTM E280-98(2004)e1 Standard Reference Radiographs for Heavy-Walled (4 &189; to 12-in. [114 to 305-mm]) Steel Castings
ASTM E2809-22 Standard Guide for Using Scanning Electron Microscopy/Energy Dispersive X-Ray Spectroscopy (SEM/EDS) in Forensic Polymer Examinations
ASTM E280-21 Standard Reference Radiographs for Heavy-Walled (412 to 12 in. (114 to 305 mm)) Steel Castings
ASTM B748-90(2010) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
ASTM F1372-93(1999) Standard Test Method for Scanning Electron Microscope (SEM) Analysis of Metallic Surface Condition for Gas Distribution System Components
ASTM F1372-93(2020) Standard Test Method for Scanning Electron Microscope (SEM) Analysis of Metallic Surface Condition for Gas Distribution System Components
ASTM E2041-08e1 Standard Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method
ASTM E2090-00 Standard Test Method for Size-Differentiated Counting of Particles and Fibers Released from Clean Room Wipers Using Optical and Scanning Electron Microscopy
ASTM E2090-12 Standard Test Method for Size-Differentiated Counting of Particles and Fibers Released from Cleanroom Wipers Using Optical and Scanning Electron Microscopy
ASTM F1372-93(2012) Standard Test Method for Scanning Electron Microscope (SEM) Analysis of Metallic Surface Condition for Gas Distribution System Components
ASTM F1372-93(2005) Standard Test Method for Scanning Electron Microscope (SEM) Analysis of Metallic Surface Condition for Gas Distribution System Components
ASTM D605-82(1996)e1 Standard Specification for Magnesium Silicate Pigment (Talc)
ASTM D6059-96(2011) Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Scanning Electron Microscopy
ASTM E2070-13(2018) Standard Test Method for Kinetic Parameters by Differential Scanning Calorimetry Using Isothermal Methods
ASTM B748-90(2001) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
ASTM E1588-95(2001) Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy-Dispersive Spectroscopy
ASTM E1588-08 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy Dispersive X-ray Spectrometry
ASTM E1588-10 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy Dispersive X-ray Spectrometry
ASTM E1588-95 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy-Dispersive Spectroscopy
ASTM D8231-19 Standard Practice for the Use of a Low Voltage Electronic Scanning System for Detecting and Locating Breaches in Roofing and Waterproofing Membranes
ASTM F1438-93(1999) Standard Test Method for Determination of Surface Roughness by Scanning Tunneling Microscopy for Gas Distribution System Components
ASTM F1438-93(2020) Standard Test Method for Determination of Surface Roughness by Scanning Tunneling Microscopy for Gas Distribution System Components
ASTM F2550-06 Standard Practice for Locating Leaks in Sewer Pipes Using Electro-Scan--the Variation of Electric Current Flow Through the Pipe Wall
ASTM E1588-07 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy Dispersive X-ray Spectrometry
ASTM E1588-07e1 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/Energy Dispersive X-ray Spectrometry
ASTM E3284-23 Standard Practice for Training in the Forensic Examination of Primer Gunshot Residue (pGSR) Using Scanning Electron Microscopy/Energy Dispersive X-Ray Spectrometry (SEM/EDS)
ASTM E2602-09(2015) Standard Test Methods for the Assignment of the Glass Transition Temperature by Modulated Temperature Differential Scanning Calorimetry
ASTM E2041-13(2018) Standard Test Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method
ASTM C1718-10 Standard Test Method for Nondestructive Assay of Radioactive Material by Tomographic Gamma Scanning
ASTM D7954/D7954M-14 Standard Practice for Moisture Surveying of Roofing and Waterproofing Systems Using Non-Destructive Electrical Impedance Scanners
ASTM D7954/D7954M-15 Standard Practice for Moisture Surveying of Roofing and Waterproofing Systems Using Non-Destructive Electrical Impedance Scanners
ASTM E2890-12 Standard Test Method for Kinetic Parameters for Thermally Unstable Materials by Differential Scanning Calorimetry Using the Kissinger Method
ASTM E2890-12e1 Standard Test Method for Kinetic Parameters for Thermally Unstable Materials by Differential Scanning Calorimetry Using the Kissinger Method
ASTM D5133-99 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
ASTM D5133-19 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
ASTM D5133-20 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
ASTM D5133-20a Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
ASTM D5133-15 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
ASTM E3309-21 Standard Guide for Reporting of Forensic Primer Gunshot Residue (pGSR) Analysis by Scanning Electron Microscopy/Energy Dispersive X-Ray Spectrometry (SEM/EDS)
ASTM E698-16 Standard Test Method for Kinetic Parameters for Thermally Unstable Materials Using Differential Scanning Calorimetry and the Flynn/Wall/Ozawa Method

Association of German Mechanical Engineers, How to use scanning electron microscope

VDI/VDE 2656 Blatt 1-2008 Determination of geometrical quantities by using of Scanning Probe Microscopes - Calibration of measurement systems

BE-NBN, How to use scanning electron microscope

NBN EN ISO 9220:1995 Metallic coatings - Measurement of coating thickness - Scanning électron microscope method (ISO 9220:1988)

国家市场监督管理总局、中国国家标准化管理委员会, How to use scanning electron microscope

GB/T 38783-2020 Method of coating thickness determination for precious metal composites by scanning electron microscope

ES-UNE, How to use scanning electron microscope

UNE-EN ISO 9220:2022 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO 9220:2022)
UNE-EN 3475-414:2005 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 414: Differential scanning calorimeter (DSC test) (Endorsed by AENOR in December of 2005.)
UNE-EN ISO 17751-2:2016 Textiles - Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends - Part 2: Scanning Electron Microscopy method (ISO 17751-2:2016)

German Institute for Standardization, How to use scanning electron microscope

DIN SPEC 52407:2015-03 Nanotechnologies - Methods for preparation and assessment for particle measurements with atomic force microscopy (AFM) and transmission scanning electron microscopy (TSEM)
DIN EN ISO 9614-3:2009-11 Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning (ISO 9614-3:2002); German version EN ISO 9614-3:2009
DIN ISO 16000-27:2014 Indoor air - Part 27: Determination of settled fibrous dust on surfaces by SEM (scanning electron microscopy) (direct method) (ISO 16000-27:2014)

Association Francaise de Normalisation, How to use scanning electron microscope

XP X21-015*XP ISO/TS 24597:2011 Microbeam analysis - Scanning electron microscopy - Methods of evaluating image sharpness
XP ISO/TS 24597:2011 Analyse par microfaisceaux - Microscopie électronique à balayage - Méthodes d'évaluation de la netteté d'image
FD T16-203:2011 Nanotechnologies - Characterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
NF X43-404-27*NF ISO 16000-27:2014 Indoor air - Part 27 : determination of settled fibrous dust on surfaces by SEM (scanning electron microscopy) (direct method)

Japanese Industrial Standards Committee (JISC), How to use scanning electron microscope

JIS R 1633:1998 Sample preparation method of fine ceramics and fine ceramic powders for scanning electron microscope observation
JIS K 3850-1:2000 Measuring method for airborne fibrous particles -- Part 1: Optical microscopy method and scanning electron microscopy method
JIS Z 8736-3:2006 Acoustics -- Determination of sound power levels of noise sources using sound intensity -- Part 3: Precision method for measurement by scanning
JIS L 1030-4-1:2023 Textiles -- Qualitative and quantitative analysis of some cellulose fibres (lyocell, cupro) and their blends -- Part 4-1: Fibre identification using scanning electron microscopy and spectral analysis methods

American National Standards Institute （ANSI), How to use scanning electron microscope

ANSI/ASTM D6059:2001 Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Scanning Electron Microscopy

BELST, How to use scanning electron microscope

STB 2210-2011 Nano-sized carbon and non-carbon materials and composites based on them. Method for determining parameters using scan electron microscopy measurements
STB 2209-2011 Nano-sized carbon and non-carbon materials and composites based on them. The technique for determining elemental composition using scan electron microscopy measurements

ZA-SANS, How to use scanning electron microscope

SANS 12653-2:2006 Electronic imaging - Test target for the black-and-white scanning of office documents Part 2: Method of use

Korean Agency for Technology and Standards (KATS), How to use scanning electron microscope

KS X ISO 12653-2-2007(2022) Electronic imaging－Test target for the black-and-white scanning of office documents－Part 2：Method of use
KS X ISO 12653-2-2007(2017) Electronic imaging－Test target for the black-and-white scanning of office documents－Part 2：Method of use
KS X ISO 12653-2:2007 Electronic imaging-Test target for the black-and-white scanning of office documents-Part 2:Method of use

International Telecommunication Union (ITU), How to use scanning electron microscope

ITU-R BR.1374-2001 Scanned area dimensions from 16 mm and 35 mm cinematographic film used in television

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, How to use scanning electron microscope

ITU-R BR.1374-1998 Scanned Area Dimensions from 16 MM and 35 MM Cinematographic Film Used in Television

Professional Standard - Public Safety Standards, How to use scanning electron microscope

GA/T 909-2010 Collecting and packaging method for trace evidence-Gunshot residue(SEM/EDS examination)
GA/T 823.3-2018 Methods of Examination of Paint Evidence in Forensic Science Part 3: Scanning Electron Microscopy/X-ray Spectroscopy

Danish Standards Foundation, How to use scanning electron microscope

DS/ISO/TS 10798:2011 Nanotechnologies - Charaterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis

SE-SIS, How to use scanning electron microscope

SIS SS 459 01 10-1991 Acoustics - Determination of soundpower levels ofnoise sources using sound intensity measurements - Scanning methodfor use in situ

AASHTO - American Association of State Highway and Transportation Officials, How to use scanning electron microscope

TP 101-2012 Standard Method of Test for Estimating Fatigue Resistance of Asphalt Binders Using the Linear Amplitude Sweep

ECMA - European Association for Standardizing Information and Communication Systems, How to use scanning electron microscope

ECMA 160-1991 Determination of Sound Power Levels of Computer and Business Equipment Using Sound Intensity Measurements; Scanning Method in Controlled Rooms

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, How to use scanning electron microscope

PREN 3475-414-1999 Aerospace Series Cables@ Electrical@ Aircraft Use Test Methods Part 414: Differential Scanning Calorimeter (DSC Test) (Edition P 1)

Lithuanian Standards Office , How to use scanning electron microscope

LST EN ISO 9614-3:2010 Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning (ISO 9614-3:2002)

AENOR, How to use scanning electron microscope

UNE-EN ISO 9614-3:2010 Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning (ISO 9614-3:2002)

KR-KS, How to use scanning electron microscope

KS D ISO 15632-2023 Microbeam analysis — Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers(EDS) for use with a scanning electron microscope(SEM) or a

Society of Automotive Engineers (SAE), How to use scanning electron microscope

SAE J1752-2-2011 Measurement of Radiated Emissions from Integrated Circuits Surface Scan Method (Loop Probe Method) 10 MHz to 3 GHz

European Committee for Standardization (CEN), How to use scanning electron microscope

EN ISO 17751-2:2023 Textiles - Quantitative analysis of cashmere, wool, other specialty animal fibres and their blends - Part 2: Scanning electron microscopy method (ISO 17751-2:2023)

GOSTR, How to use scanning electron microscope

GOST R ISO 10360-4-2017 Geometrical product specifications. Acceptance and reverification tests for coordinate measuring machines. Сoordinate measuring machines used in scanning mode