ZH
RU
ES
Powder Direct Pressing Powder Direct Pressing
Powder Direct Pressing Powder Direct Pressing, Total:328 items.
In the international standard classification, Powder Direct Pressing Powder Direct Pressing involves: Powder metallurgy, Chipless working equipment, Bearings, Construction materials, Testing of metals, Products of the chemical industry, Equipment for the chemical industry, Equipment for petroleum and natural gas industries, Valves, Materials for aerospace construction, Ceramics, Plastics, Fluid storage devices, Ferrous metals, Aerospace electric equipment and systems, Analytical chemistry, Electrical accessories, Measurement of volume, mass, density, viscosity, Packaging and distribution of goods in general, Internal combustion engines, Particle size analysis. Sieving, Pipeline components and pipelines, Iron and steel products, Nuclear energy engineering, Surface treatment and coating, Products of non-ferrous metals, Fasteners for aerospace construction, Optics and optical measurements, Metalliferous minerals, Aids for disabled or handicapped persons.
SE-SIS, Powder Direct Pressing Powder Direct Pressing
- SIS SS 11 29 10-1982 Powder metallurgy - Ductile metallic powders - Determination of compactibility (compressibility)
- SIS 11 29 10-1963 Determining the compressibility of ductile metal pocders
- SIS 11 29 10-1975 Metallic powders. Determ i nation of compactibility (compressibility) in uniaxial compression
RO-ASRO, Powder Direct Pressing Powder Direct Pressing
- STAS 10850-1977 Metal powders aluminium flake powder for autoclaved CEU llular concrete
- STAS SR EN 23927-1994 Metallic powders, excluding powders for hardmetals. Determination of compactibility (compressibility) in uniaxial compression
- STAS 9089-1980 METAL POWDERS Determination of compressibility
- STAS SR EN 24492-1994 Metallic powders, excluding powders for hardmetals. Determination of dimensional changes associated with compacting and sintering
CZ-CSN, Powder Direct Pressing Powder Direct Pressing
Association Francaise de Normalisation, Powder Direct Pressing Powder Direct Pressing
- NF A95-121:2011 Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression.
- NF A95-121*NF EN ISO 3927:2017 Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression
- NF EN ISO 3927:2017 Poudres métalliques, à l'exclusion des poudres pour métaux-durs - Détermination de la compressibilité sous compression uniaxiale
- NF A95-121:1993 Metallic powders, excluding powders for hardmetals. Determinationof compactibility (compressibility)in uniaxial compression.
- NF EN ISO 4492:2017 Poudres métalliques à l'exclusion des poudres pour métaux-durs - Détermination de changements dimensionnels liés à la compression et au frittage
- NF A95-171*NF EN ISO 4492:2017 Metallic powders, excluding powders for hardmetals - Determination of dimensional changes associated with compacting and sintering
- NF A95-171:1993 Metallic powders, excluding powders for hardmetals. Determination of dimensional changes associated with compacting and sintering.
- NF EN ISO 17172:2021 Céramiques techniques - Détermination des propriétés de compactage des poudres céramiques
- NF A95-171:2013 Metallic powders, excluding powders for hardmetals - Determination of dimensional changes associated with compacting and sintering
- NF B41-103:1988 Technical ceramics for thermomechanical use - Determination of the compressibility of the powders
- NF A95-123*NF EN 23995:1993 Metallic powders. Determination of green strength by transverse rupture of rectangular compacts.
- NF B42-010:1997 Advanced technical ceramics. Methods of test for ceramic powders. Part 10 : determination of compaction properties.
- NF B42-001-10*NF EN 725-10:2007 Advanced technical ceramics - Methods of test for ceramic powders - Part 10 : determination of compaction properties
- NF B43-360*NF EN ISO 17172:2021 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of compaction properties of ceramic powders
- NF EN 725-10:2007 Céramiques techniques avancées - Méthodes d'essai pour poudres céramiques - Partie 10 : détermination des propriétés de compaction
- NF EN 15979:2011 Essai sur matières premières et matériaux de base céramiques - Détermination directe des fractions massiques d'impuretés dans les poudres et granulés de carbure de silicium par OES à l'excitation d'arc DC
- NF T70-364:2003 Energetic materials for defense - Physical-chemical analysis and properties - Implementation ability by compression of powdered explosives.
- NF T70-364:2014 Energetic materials for defense - Physical-chemical analysis and properties - Implementation ability by compression of powdered explosives
- NF A95-322:1971 POWDER METALLURGY. DIMENSIONS OF TENSILE TEST PIECES FOR THE DETERMINATION OF THE MECHANICAL CHARACTERISTICS OF COMPRESSED AND SINTERED PRODUCTS.
- NF B41-105*NF EN 15979:2011 Testing of ceramic raw and basic materials - Direct determination of mass fractions of impurities in powders and granules of silicon carbide by OES by DC arc excitation.
- NF B41-011-2*NF EN ISO 23145-2:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of bulk density of ceramic powders - Part 2 : Untapped density
European Committee for Standardization (CEN), Powder Direct Pressing Powder Direct Pressing
- EN ISO 3927:2017 Metallic powders@ excluding powders for hardmetals - Determination of compressibility in uniaxial compression
- EN ISO 3927:2011 Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression (ISO 3927:2011)
- prEN 23927-1992 Metallic powders, excluding powders for hardmetals; determination of compactibility (compressibility) in uniaxial compression (ISO 3927:1985)
- EN 23927:1993 Metallic Powders, Excluding Powders for Hardmetals - Determination of Compactibility (Compressibility) in Uniaxial Compression (ISO 3927: 1985)
- prEN 24492-1992 Metallic powders, excluding powders for hardmetals; determination of dimensional changes associated with compacting and sintering (ISO 4492:1985)
- EN ISO 3927:2001 Metallic Powders, Excluding Powders for Hardmetals - Determination of Compressibility in Uniaxial Compression ISO 3927:2001; Supersedes EN 23927:1993
- EN ISO 4492:2017 Metallic powders@ excluding powders for hardmetals - Determination of dimensional changes associated with compacting and sintering
- EN ISO 4492:2013 Metallic powders, excluding powders for hardmetals - Determination of dimensional changes associated with compacting and sintering [Superseded: CEN EN 24492]
- EN 24492:1993 Metallic Powders, Excluding Powders for Hardmetals - Determination of Dimensional Changes Associated with Compacting and Sintering (ISO 4492: 1985)
- EN 23995:1993 Metallic powders; determination of green strength by transverse rupture of rectangular compacts (ISO 3995:1985)
- EN ISO 3995:2023 Metallic powders - Determination of green strength by transverse rupture of rectangular compacts (ISO 3995:2023)
- FprEN ISO 3995 Metallic powders - Determination of green strength by transverse rupture of rectangular compacts (ISO/FDIS 3995:2023)
- EN 725-10:2007 Advanced technical ceramics - Methods of test for ceramic powders - Part 10: Determination of compaction properties
- EN 725-10:1997 Advanced Technical Ceramics - Methods of Test for Ceramic Powders - Part 10: Determination of Compaction Properties
- prEN ISO 5842 Powder metallurgy - Hot isostatic pressing - Argon detection using gas chromatography and mass spectrometry techniques (ISO 5842:2022)
- EN ISO 5842:2023 Powder metallurgy - Hot isostatic pressing - Argon detection using gas chromatography and mass spectrometry techniques (ISO 5842:2022)
- EN 15979:2011 Testing of ceramic raw and basic materials - Direct determination of mass fractions of impurities in powders and granules of silicon carbide by OES by DC arc excitation
Danish Standards Foundation, Powder Direct Pressing Powder Direct Pressing
- DS/EN ISO 3927:2011 Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression
- DS/EN 23927:1994 Metallic powders, excluding powders for hardmetals. Determination of compactibility (compressibility) in uniaxial compression
- DS/EN ISO 4492:2013 Metallic powders, excluding powders for hardmetals - Determination of dimensional changes associated with compacting and sintering
- DS/EN 23995:1994 Metallic powders-Determination of green strength by transverse rupture of rectangular compacts
- DS/ISO 3995:1994 Metallic powders - Determination of green strength by transverse rupture of rectangular compacts
- DS/EN ISO 17172:2021 Fine ceramics (advanced ceramics, advanced technical ceramics) – Determination of compaction properties of ceramic powders (ISO 17172:2014)
- DS/EN 725-10:2007 Advanced technical ceramics - Methods of test for ceramic powders - Part 10: Determination of compaction properties
International Organization for Standardization (ISO), Powder Direct Pressing Powder Direct Pressing
- ISO 3927:1977 Metallic powders, excluding powders for hardmetals — Determination of compactibility (compressibility) in uniaxial compression
- ISO 3927:2011 Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression
- ISO 3927:2017 Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression
- ISO 3927:2001 Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression
- ISO 3927:1985 Metallic powders, excluding powders for hardmetals; Determination of compactibility (Compressibility) in uniaxial compression
- ISO 3927:2001/Cor 1:2008 Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression; Technical Corrigendum 1
- ISO 4492:2013 Metallic powders, excluding powders for hardmetals - Determination of dimensional changes associated with compacting and sintering
- ISO 4492:1985 Metallic powders, excluding powders for hardmetals; Determination of dimensional changes associated with compacting and sintering
- ISO 4492:1978 Metallic powders, excluding powders for hardmetals — Determination of dimensional changes associated with compacting and sintering
- ISO 4492:2017 Metallic powders, excluding powders for hardmetals - Determination of dimensional changes associated with compacting and sintering
- ISO 3995:1985 Metallic powders; Determination of green strength by transverse rupture of rectangular compacts
- ISO 3995:2023 Metallic powders — Determination of green strength by transverse rupture of rectangular compacts
- ISO 3995:1977 Metallic powders — Determination of green strength by transverse rupture of rectangular compacts
- ISO/FDIS 3995 Metallic powders — Determination of green strength by transverse rupture of rectangular compacts
- ISO 5842:2022 Powder metallurgy — Hot isostatic pressing — Argon detection using gas chromatography and mass spectrometry techniques
- ISO 23145-2:2012 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of bulk density of ceramic powders - Part 2: Untapped density
Korean Agency for Technology and Standards (KATS), Powder Direct Pressing Powder Direct Pressing
- KS D ISO 3927-2012(2022) Metallic powders, excluding powders for hardmetals－Determination of compactibility(compressibility) in uniaxial compression
- KS D ISO 3927-2012(2017) Metallic powders, excluding powders for hardmetals－Determination of compactibility(compressibility) in uniaxial compression
- KS D ISO 3927:2012 Metallic powders, excluding powders for hardmetals－Determination of compactibility(compressibility) in uniaxial compression
- KS B 2104-2005(2010) Method for determination of radial crushing strength constant of metal powder sintered bearing, oil impregnated
- KS D ISO 4492:2004 Metallic powders, excluding powders for hardmetals-Determination of dimensional changes associated with compacting and sintering
- KS D ISO 4492:2019 Metallic powders, excluding powders for hardmetals — Determination of dimensional changes associated with compacting and sintering
- KS L 1625-2012(2017) Testing method for compaction property of fine ceramic powders
- KS M 3067-2011 Testing methods for polytetrafluoroethylene powder for paste extrusion
- KS D 0410-2012(2017) Method for determination of flow rate at elevated temperatures for powder mixed intended for warm compacting
- KS M 3352-2016(2021) Polytetrafluoroethylene powder for molding and extrusion materials
- KS M 3067-1986 Testing methods for polytetrafluoroethylene powder for paste extrusion
- KS L 1625-2012 Testing method for compaction property of fine ceramic powders
- KS D 0410-2012 Method for determination of flow rate at elevated temperatures for powder mixed intended for warm compacting
- KS D 1661-2005 Determination of lead content in PZT(Piezo Zirconate Titanate) powders－EDTA titration method
- KS M 3067-2011(2021) Testing methods for polytetrafluoroethylene powder for paste extrusion
- KS D 0410-2012(2022) Method for determination of flow rate at elevated temperatures for powder mixed intended for warm compacting
- KS D ISO 3995:2001 Metallic powders-Determination of green strength by transverse rupture of rectangular compacts
- KS B 2104-2005 Method for determination of radial crushing strength constant of metal powder sintered bearing, oil impregnated
- KS D 0411-2012 Method for determination of apparent density at elevated temperatures for powder mixes intended for warm compacting
- KS D ISO 3995-2001(2011) Metallic powders－Determination of green strength by transverse rupture of rectangular compacts
- KS D 0411-2012(2022) Method for determination of apparent density at elevated temperatures for powder mixes intended for warm compacting
- KS B 2104-2013 Method for determination of radial crushing strength constant of metal powder sintered bearing, oil impregnated
- KS D 0411-2012(2017) Method for determination of apparent density at elevated temperatures for powder mixes intended for warm compacting
PL-PKN, Powder Direct Pressing Powder Direct Pressing
- PN H04931-1991 Metallic powders. Determination of compactibilty (compressibility)
- PN H04946-1991 Metallic powders. Determination of green strength by transvere rupture of compacts
- PN H04963-1987 Metals powders Determination of dimensional changes of specimens associated after compacting and sintering
- PN-EN ISO 17172-2021-06 E Fine ceramics (advanced ceramics, advanced technical ceramics) -- Determination of compaction properties of ceramic powders (ISO 17172:2014)
Japanese Industrial Standards Committee (JISC), Powder Direct Pressing Powder Direct Pressing
- JIS Z 2508:2004 Metallic powders, excluding powders for hardmetals -- Determination of compressibility in uniaxial compression
- JIS A 5041:2009 Crushed stone powder for concrete
- JIS Z 2509:2004 Metallic powders, excluding powders for hardmetals -- Determination of dimensional changes associated with compacting and sintering
- JIS K 6896:1995 Polytetrafluoroethylene powder for molding and extrusion materials
- JIS Z 8835:2016 Direct shear testing method for critical state line (CSL) and wall yield locus (WYL) of powder bed
German Institute for Standardization, Powder Direct Pressing Powder Direct Pressing
- DIN ISO 3995:1991 Metallic powders; determination of green strength by transverse rupture of rectangular compacts; identical with ISO 3995:1985
- DIN EN ISO 3927:2018-01 Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression (ISO 3927:2017); German version EN ISO 3927:2017
- DIN EN ISO 3927:2018 Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression (ISO 3927:2017)
- DIN EN ISO 4492:2018-03 Metallic powders, excluding powders for hardmetals - Determination of dimensional changes associated with compacting and sintering (ISO 4492:2017); German version EN ISO 4492:2017
- DIN EN ISO 3927:2002 Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression (ISO 3927:2001); German version EN ISO 3927:2001
- DIN EN ISO 3927:2011 Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression (ISO 3927:2011); German version EN ISO 3927:2011
- DIN EN ISO 4492:2018 Metallic powders, excluding powders for hardmetals - Determination of dimensional changes associated with compacting and sintering (ISO 4492:2017)
- DIN ISO 4492:1987 Metallic powders, excluding powders for hardmetals; determination of dimensional changes associated with compacting and sintering; identical with ISO 4492, edition 1985
- DIN EN ISO 4492:2013 Metallic powders, excluding powders for hardmetals - Determination of dimensional changes associated with compacting and sintering (ISO 4492:2013); German version EN ISO 4492:2013
- DIN EN ISO 4492:2012 Metallic powders, excluding powders for hardmetals - Determination of dimensional changes associated with compacting and sintering (ISO/FDIS 4492:2012); German version FprEN ISO 4492:2012
- DIN EN ISO 3995:2022-08 Metallic powders - Determination of green strength by transverse rupture of rectangular compacts (ISO/DIS 3995:2022); German and English version prEN ISO 3995:2022 / Note: Date of issue 2022-07-22*Intended as replacement for DIN ISO 3995 (1991-05).
- DIN EN 725-10:2007 Advanced technical ceramics - Methods of test for ceramic powders - Part 10: Determination of compaction properties; English version of DIN EN 725-10:2007-11
- DIN EN ISO 5842:2023 Powder metallurgy - Hot isostatic pressing - Argon detection using gas chromatography and mass spectrometry techniques (ISO 5842:2022); German and English version prEN ISO 5842:2023
- DIN ISO 3995:1991-05 Metallic powders; determination of green strength by transverse rupture of rectangular compacts; identical with ISO 3995:1985 / Note: To be replaced by DIN EN ISO 3995 (2022-08).
- DIN EN ISO 5842:2023-03 Powder metallurgy - Hot isostatic pressing - Argon detection using gas chromatography and mass spectrometry techniques (ISO 5842:2022); German and English version prEN ISO 5842:2023 / Note: Date of issue 2023-02-10
- DIN EN 15979:2011-04 Testing of ceramic raw and basic materials - Direct determination of mass fractions of impurities in powders and granules of silicon carbide by OES by DC arc excitation; German version EN 15979:2011
- DIN EN ISO 17172:2020 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of compaction properties of ceramic powders (ISO 17172:2014); German and English version prEN ISO 17172:2020
- DIN EN ISO 17172:2021-12 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of compaction properties of ceramic powders (ISO 17172:2014); German version EN ISO 17172:2021
- DIN 3900:2001 Non soldering compression fittings with cutting ring series LL - Straight studs with taper thread
- DIN EN ISO 3995:2023-09 Metallic powders - Determination of green strength by transverse rupture of rectangular compacts (ISO 3995:2023); German version EN ISO 3995:2023
- DIN EN 15979:2011 Testing of ceramic raw and basic materials - Direct determination of mass fractions of impurities in powders and granules of silicon carbide by OES by DC arc excitation; German version EN 15979:2011
- DIN EN ISO 5842:2023-10 Powder metallurgy - Hot isostatic pressing - Argon detection using gas chromatography and mass spectrometry techniques (ISO 5842:2022); German version EN ISO 5842:2023
- DIN EN ISO 3927 Berichtigung 1:2009 Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression (ISO 3927:2001); German version EN ISO 3927:2001, Corrigendum to DIN EN ISO 3927:2002-04; German version EN ISO 3927:2001/AC: 2009
- DIN EN ISO 17172:2021 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of compaction properties of ceramic powders (ISO 17172:2014); German version EN ISO 17172:2021
ES-UNE, Powder Direct Pressing Powder Direct Pressing
- UNE-EN ISO 3927:2018 Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression (ISO 3927:2017)
- UNE-EN ISO 4492:2018 Metallic powders, excluding powders for hardmetals - Determination of dimensional changes associated with compacting and sintering (ISO 4492:2017)
- SAE AMS6559A-2023 Steel, Bars, Wire, and Forgings 9.75V - 5.25Cr - 1.3Mo (2.40 - 2.55C) Powder Metallurgy Product Hot Isostatically Pressed
- SAE AMS6557A-2023 Steel, Bars, Wire, and Forgings 9V - 5.25Cr - 1.3Mo (1.80 - 1.95C) Powder Metallurgy Product Hot Isostatically Pressed
- SAE AMS6558A-2023 Steel, Bars, Wire, and Forgings 10.5Mo - 6W - 3.75Cr - 2V (1.25 - 1.40C) Powder Metallurgy Product Hot Isostatically Pressed
- UNE-EN ISO 17172:2021 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of compaction properties of ceramic powders (ISO 17172:2014) (Endorsed by Asociación Española de Normalización in March of 2021.)
- SAE AMS6556A-2023 Steel, Bars, Wire, and Forgings 8V - 4Cr - 4W - 3Mo (2.45 - 2.55C) Powder Metallurgy Product Hot Isostatically Pressed
- UNE-EN 15979:2011 Testing of ceramic raw and basic materials - Direct determination of mass fractions of impurities in powders and granules of silicon carbide by OES by DC arc excitation (Endorsed by AENOR in March of 2011.)
IT-UNI, Powder Direct Pressing Powder Direct Pressing
Professional Standard - Machinery, Powder Direct Pressing Powder Direct Pressing
- JB/T 3819-1984 Hydraulic press for powder products Precision
- JB/T 3819-2014 Powder product hydraulic press.Testing of the accuracy
- JB/T 8396-1996 Bell-type pressurized sintering furnace for powder metallurgy
- JB/T 12080-2014 Mechanical compacting press for powder metallurgy.Technical spcifications
- JB/T 12293.2-2015 Mechanical powder molding press.Part 2: Accuracy
- JB/T 12519.1-2015 Powder metallurgy hydraulic press.Part 1: Types and basic parameters
- JB/T 11324-2013 Internal combustion engines turbochargers.Powder metallurgy thrust bearings.Specification
- JB/T 12293.1-2015 Mechanical powder molding press.Part 1: Types and basic parameters
- JB/T 12772.2-2015 NC high speed precision powder compacting press.Part 2: Technical requirements
- JB/T 12772.1-2015 NC high speed precision powder compacting press.Part 1: Types and basic parameters
工业和信息化部, Powder Direct Pressing Powder Direct Pressing
- JB/T 13914-2020 Intelligent powder molding press
- JB/T 13369-2018 Powder insulated low pressure cryogenic liquid storage tank
- JB/T 13900-2020 Technical conditions of mechanical powder molding press
- JB/T 14677-2022 Technical specifications for powder metallurgy high manganese non-magnetic steel balance weights for air conditioning compressors
- YB/T 6012-2022 Determination of multi-element content of blast furnace slag by X-ray fluorescence spectrometry (powder tabletting method)
British Standards Institution (BSI), Powder Direct Pressing Powder Direct Pressing
- BS EN ISO 3927:2002 Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression
- BS EN ISO 3927:2011 Metallic powders, excluding powders for hardmetals. Determination of compressibility in uniaxial compression
- BS EN ISO 3927:2017 Tracked Changes. Metallic powders, excluding powders for hardmetals. Determination of compressibility in uniaxial compression
- BS EN ISO 4492:2013 Metallic powders, excluding powders for hardmetals. Determination of dimensional changes associated with compacting and sintering
- BS EN ISO 4492:2017 Tracked Changes. Metallic powders, excluding powders for hardmetals. Determination of dimensional changes associated with compacting and sintering
- BS EN 23995:1993 Specification for metallic powders - Determination of green strength by transverse rupture of rectangular compacts
- BS EN 725-10:2007 Advanced technical ceramics - Methods of test for ceramic powders - Determination of compaction properties
- BS ISO 5842:2022 Powder metallurgy. Hot isostatic pressing. Argon detection using gas chromatography and mass spectrometry techniques
- BS EN ISO 5842:2023 Powder metallurgy. Hot isostatic pressing. Argon detection using gas chromatography and mass spectrometry techniques
- BS ISO 17172:2014 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of compaction properties of ceramic powders
- BS EN ISO 17172:2021 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of compaction properties of ceramic powders
- 21/30436358 DC BS ISO 5842. Powder metallurgy. Hot isostatic pressing. Argon detection using gas chromatography and mass spectrometry techniques
- BS 6496:1984 Specification for powder organic coatings for application and stoving to aluminium alloy extrusions, sheet and preformed sections for external architectural purposes, and for the finish on aluminium alloy extrusions, sheet and preformed sections coated wi
- BS EN 15979:2011 Testing of ceramic raw and basic materials. Direct determination of mass fractions of impurities in powders and granules of silicon carbide by OES by DC arc excitation
- BS ISO 23145-2:2012 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of bulk density of ceramic powders. Untapped density
- BS ISO 12926:2013 Aluminium fluoride for industrial use. Determination of trace elements. Wavelength dispersive X-ray fluorescence spectrometric method using pressed powder tablets
- BS ISO 17190-7:2020 Urine-absorbing aids for incontinence. Polyacrylate superabsorbent powders - Test method for gravimetric determination of absorption against pressure
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Powder Direct Pressing Powder Direct Pressing
- GB/T 1481-1998 Metallic powders (excluding powders for hardmetals)--Determination of compressibility in uniaxial compression
- GB/T 1481-2022 Metallic powders，excluding powders for hardmetals—Determination of compressibility in uniaxial compression
- GB/T 1481-2012 Metallic powders (excluding powders for hardmetals).Determination of compressibility in uniaxial compression
- GB/T 43091-2023 Powder compressive strength test method
- GB/T 11105-1989 Metallic powder--Rattler test for the green compacts
- GB/T 11105-2012 Metallic powder.Rattle test for the green compacts
- GB 11105-1989 Ratola test of metal powder compacts
- GB/T 11106-1989 Metallic powder--Determination of green strength by compression of cylinder compacts
- GB/T 5160-2002 Metallic powders--Determination of green strength by transverse rupture of rectangular compacts
- GB/T 5237.4-2017(英文版) Wrought aluminum alloy extruded profiles for architecture—Part 4：Powder coating profiles
BE-NBN, Powder Direct Pressing Powder Direct Pressing
- NBN-EN 23927-1993 Metallic powders, excluding powders for hardmetals. Determination of compactibility (Compressibility) in uniaxial compression (ISO 3927: 1985)
- NBN C 23-106-1975
- NBN-EN 23953-1993 Metallic powders. Determination of tap density (ISO 3953: 1985)
- NBN-EN 23995-1993 Metallic powders.Determination of green strength by transverse rupture of rectangular compacts (ISO 3995: 1985)
- NBN-EN 24492-1993 Metallic powders, excluding powders for hardmetals. Determination of dimensional changes associated with compacting and sintering (ISO 4492: 1985)
YU-JUS, Powder Direct Pressing Powder Direct Pressing
- JUS C.A2.030-1990 Metaliic potfders, excluding powders for hardmetals. Determlnation of compactibi-llty (compresslbllity) in uniaxlal compression
- JUS ISO 4492:1991 Metallic powders, excluding powders for hardmetals. Determination of dimensional changes associated with compacting and sintering
- JUS C.A4.058-1990 Metalic pomJers. Determination of green strength by traasverse rupture of rectan-gular compacts
Lithuanian Standards Office , Powder Direct Pressing Powder Direct Pressing
- LST EN ISO 3927:2011 Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression (ISO 3927:2011)
- LST EN 24492-2000 Metallic powders, excluding powders for hardmetals - Determination of dimensional changes associated with compacting and sintering (ISO 4492:1985)
- LST EN 23995-2000 Metallic powders - Determination of green strength by transverse rupture of rectangular compacts (ISO 3995:1985)
- LST EN 725-10-2007 Advanced technical ceramics - Methods of test for ceramic powders - Part 10: Determination of compaction properties
- LST EN ISO 17172:2021 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of compaction properties of ceramic powders (ISO 17172:2014)
AENOR, Powder Direct Pressing Powder Direct Pressing
- UNE-EN ISO 3927:2011 Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression (ISO 3927:2011)
- UNE-EN ISO 4492:2013 Metallic powders, excluding powders for hardmetals - Determination of dimensional changes associated with compacting and sintering (ISO 4492:2013)
- UNE-EN 23995:1999 METALLIC POWDERS. DETERMINATION OF GREEN STRENGTH BY TRANSVERSE RUPTURE OF RECTANGULAR COMPACTS (ISO 3995:1985)
Group Standards of the People's Republic of China, Powder Direct Pressing Powder Direct Pressing
- T/ZZB 2595-2021 High- compressibility water-atomized pure iron powder for powder metallurgy
- T/ZZB 0329-2018 Servo electric powder molding press
- T/SZBX 102-2023 Static vacuum powder insulated cryogenic pressure vessels
- T/GMES 004-2018 Determination of various components in chromite by X-ray fluorescence spectrometry (powder compression)
- T/NAIA 0214-2023 Determination of Major Elements in Coal Gangue by Powder Compression-X-ray Fluorescence Spectrometry
- T/CGWSTC 001-2022 Determination of various components in ceramic raw materials X-ray fluorescence spectrometry (powder compression)
NL-NEN, Powder Direct Pressing Powder Direct Pressing
- NEN-ISO 3927:1993 Metallic powders, excluding powders for hardmetals. Determiantion of compactibility (compressibility) in uniaxial compression (ISO 3927:1985)
- NEN-ISO 4492:1993 Metallic powders, excluding powders for hardmetals. Determination of dimensional changes associated with compacting and sintering (ISO 4492:1985)
- NEN-ISO 3995:1993 Metallic powders. Determination of green strength by transverse rupture of rectangular compacts (ISO 3995:1985)
HU-MSZT, Powder Direct Pressing Powder Direct Pressing
RU-GOST R, Powder Direct Pressing Powder Direct Pressing
- GOST 26529-1985 Powder materials. Radial crushing test method
- GOST 10480-1988 Powder metal compacting mechanical automatic machines. Parameters and dimentions. Norms of accuracy
- GOST 29012-1991 Powder metallurgy. Method of determination of compacts dimensional changes after compacting pressure relief and at the time of sintering
Professional Standard - Chemical Industry, Powder Direct Pressing Powder Direct Pressing
American National Standards Institute （ANSI), Powder Direct Pressing Powder Direct Pressing
- ANSI B11.16-2003 Safety Requirements for Powder/Metal Compacting Presses
- ANSI B11.16-2014(R2020) Machine Tools - Safety Requirements for Powder/Metal Compacting Presses (MPIF #47)
- BS EN ISO 3995:2023 Metallic powders. Determination of green strength by transverse rupture of rectangular compacts (British Standard)
- ANSI/ASTM B834:1996 Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367) and Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625) Alloy Pipe Flanges, Fittings, Valves and Parts
KR-KS, Powder Direct Pressing Powder Direct Pressing
- KS D ISO 4492-2019 Metallic powders, excluding powders for hardmetals — Determination of dimensional changes associated with compacting and sintering
CU-NC, Powder Direct Pressing Powder Direct Pressing
- NC 10-68-1988 Metallurgy. Determination of Powder-Compact Materials Radial Compression. Testing Method
United States Navy, Powder Direct Pressing Powder Direct Pressing
Society of Automotive Engineers (SAE), Powder Direct Pressing Powder Direct Pressing
- SAE AMS4993C-2004 Titanium Alloy, Blended Powder Compacts, Sintered, 6Al 4V
- SAE AMS7880B-1987 Tungsten Carbide-Cobalt Powder, Sintered and Crushed
- SAE AMS4993E-2013 Titanium-Alloy, Blended Powder Compacts, Sintered, 6Al - 4V
- SAE AMS4993B-1994 Titanium Alloy, Blended Powder Compacts, Sintered 6A1 - 4V (UNS R56400)
- SAE AMS4994-2000 Titanium Alloy Powdered Metal Products 6Al - 4V Hot Isostatically Pressed, Annealed
- SAE AMS4994A-2018 Titanium Alloy Powdered Metal Products 6Al - 4V Hot Isostatically Pressed, Annealed
- SAE AMS4994B-2023 Titanium Alloy Powdered Metal Products 6Al - 4V Hot Isostatically Pressed, Annealed
- SAE AMS4309A-2013 Aluminum Alloy Extrusions 8.6Fe - 1.8Se - 1.3V (8009-H112) Powder Metallurgy Product, Strain-Hardened
- SAE AMS4994-1992 Titanium Alloy, Powdered Metal Products 6Al 4V Hot Isostatically Pressed, Annealed
- SAE AMS4994A-2006 Titanium Alloy Powdered Metal Products 6Al - 4V Hot Isostatically Pressed, Annealed UNS R56400
- SAE AMS5899A-2002 Steel, Corrosion-Resistant, Bars, Wire, and Forgings 17Cr 0.52Mo (0.95 - 1.20C) Powder Metallurgy Product, Hot Isostatically Pressed
- SAE AMS5899A-2007 Steel, Corrosion-Resistant, Bars, Wire, and Forgings 17Cr - 0.52Mo (0.95 - 1.20C) Powder Metallurgy Product, Hot Isostatically Pressed
- SAE AMS4309A-1994 (Noncurrent)ALUMINUM ALLOY EXTRUSIONS 8.6Fe - 1.8Si - 1.3V (8009-H112) Powder Metallurgy Product, Strain-Hardened UNS A98009
- SAE AMS5899B-2013 Steel, Corrosion-Resistant, Bars, Wire, and Forgings 17Cr 0.52Mo (0.95 - 1.20C) Powder Metallurgy Product, Hot Isostatically Pressed
- SAE AMS5852C-1989 Nickel Alloy, Corrosion and Heat Resistant, Billets and Preforms 55Ni 15Cr 17Co 5.0Mo 3.5Ti 4.0Al 0.025B, Powder Metallurgy Product, Hot Isostatically Pressed
- SAE AMS6556-2013 Steel, Bars, Wire, and Forgings, 8 V - 4 Cr - 4 W - 3MO (2.45 - 2.55C), Powder Metallurgy Product, Hot Isostatically Pressed
- SAE AMS6559-2013 Steel, Bars, Wire, and Forgings 9.75 V 5.25 Cr 1.3 Mo (2.40 - 2.55 C) Powder Metallurgy Product Hot Isostatically Pressed
- SAE AMS6557-2013 Steel, Bars, Wire, and Forgings, 9 V â 5.25 Cr â 1.3 Mo (1.80 â 1.95C), Powder Metallurgy Product, Hot Isostatically Pressed
- SAE AMS7011-2022 Electron Beam-Powder Bed Fusion (EB-PBF) Produced Preforms and Parts Titanium Alloy, 6Al - 4V Hot Isostatically Pressed
- SAE AMS5852B-1989 ALLOY BILLETS AND PREFORMS, CORROSION AND HEAT RESISTANT 55Ni - 15Cr - 17Co - 5.0Mo - 3.5Ti - 4.0Al - 0.025B Powder Metallurgy Product, Hot Isostatically Pressed
- SAE AMS5852A-1983 ALLOY BILLETS AND PREFORMS, CORROSION AND HEAT RESISTANT 55Ni - 15Cr - 17Co - 5.0Mo - 3.5Ti - 4.0Al - 0.025B Powder Metallurgy Product, Hot Isostatically Pressed
Professional Standard - Aviation, Powder Direct Pressing Powder Direct Pressing
- HB 5441.8-1989 Performance testing of powder metallurgy products and powders - Determination of radial crush strength of sintered metal bushings
American Society for Testing and Materials (ASTM), Powder Direct Pressing Powder Direct Pressing
- ASTM B331-20 Standard Test Method for Compressibility of Metal Powders in Uniaxial Compaction
- ASTM B331-95 Standard Test Method for Compressibility of Metal Powders in Uniaxial Compaction
- ASTM B331-95(2002) Standard Test Method for Compressibility of Metal Powders in Uniaxial Compaction
- ASTM B331-10 Standard Test Method for Compressibility of Metal Powders in Uniaxial Compaction
- ASTM B331-16 Standard Test Method for Compressibility of Metal Powders in Uniaxial Compaction
- ASTM B933-09 Standard Test Method for Microindentation Hardness of Powder Metallurgy (P/M) Materials
- ASTM B933-04 Standard Test Method for Microindentation Hardness of Powder Metallurgy (P/M) Materials
- ASTM B312-20 Standard Test Method for Green Strength of Specimens Compacted from Metal Powders
- ASTM B312-14 Standard Test Method for Green Strength of Specimens Compacted from Metal Powders
- ASTM B312-96(2002) Standard Test Method for Green Strength for Compacted Metal Powder Specimens
- ASTM B312-96 Standard Test Method for Green Strength for Compacted Metal Powder Specimens
- ASTM B312-09 Standard Test Method for Green Strength of Specimens Compacted from Metal Powders
- ASTM B933-20 Standard Test Method for Microindentation Hardness of Powder Metallurgy (PM) Materials
- ASTM B933-14 Standard Test Method for Microindentation Hardness of Powder Metallurgy 40;PM41; Materials
- ASTM B610-19 Standard Test Method for Measuring Dimensional Changes Associated with Processing Metal Powders Intended for Die Compaction
- ASTM B834-22 Standard Specification for Pressure Consolidated Powder Nickel Alloy Pipe Flanges, Fittings, Valves, and Parts
- ASTM B939-21 Standard Test Method for Radial Crushing Strength,
- ASTM C1408-98(2004) Standard Test Method for Carbon (Total) in Uranium Oxide Powders and Pellets By Direct Combustion-Infrared Detection Method
- ASTM C1408-98 Standard Test Method for Carbon (Total) in Uranium Oxide Powders and Pellets By Direct Combustion-Infrared Detection Method
- ASTM C1408-09 Standard Test Method for Carbon (Total) in Uranium Oxide Powders and Pellets By Direct Combustion-Infrared Detection Method
- ASTM C1408-16 Standard Test Method for Carbon (Total) in Uranium Oxide Powders and Pellets By Direct Combustion-Infrared Detection Method
- ASTM C1865-18 Standard Test Method for The Determination of Carbon and Sulfur Content in Plutonium Oxide Powder by the Direct Combustion-Infrared Spectrophotometer
- ASTM D6683-08 Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids as Function of Compressive Stress
- ASTM B939-15 Standard Test Method for Radial Crushing Strength, K, of Powder Metallurgy (PM) Bearings and Structural Materials
- ASTM B939-05 Standard Test Method for Radial Crushing Strength, K, of Powder Metallurgy (P/M) Bearings and Structural Materials
- ASTM B939-09 Standard Test Method for Radial Crushing Strength, K, of Powder Metallurgy (P/M) Bearings and Structural Materials
- ASTM B610-23 Standard Test Method for Measuring Dimensional Changes Associated with Processing Metal Powders Intended for Die Compaction
- ASTM B934-04a Standard Test Method for Effective Case Depth of Ferrous Powder Metallurgy (P/M) Parts Using Microindentation Hardness Measurements
- ASTM B934-04 Standard Test Method for Effective Case Depth of Ferrous Powder Metallurgy (P/M) Parts Using Microindentation Hardness Measurements
- ASTM D6683-14 Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids as Function of Compressive Stress
- ASTM B962-15 Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle
- ASTM B962-08 Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedesx2019; Principle
- ASTM B962-13 Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedesrsquo; Principle
- ASTM B962-23 Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle
- ASTM E259-06(2011) Standard Practice for Preparation of Pressed Powder White Reflectance Factor Transfer Standards for Hemispherical and Bi-Directional Geometries
- ASTM E259-06(2015) Standard Practice for Preparation of Pressed Powder White Reflectance Factor Transfer Standards for Hemispherical and Bi-Directional Geometries
- ASTM B934-10 Standard Test Method for Effective Case Depth of Ferrous Powder Metallurgy (P/M) Parts Using Microindentation Hardness Measurements
- ASTM D6683-19 Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids as Function of Compressive Stress
- ASTM B962-17 Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle
- ASTM B962-14 Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy 40;PM41; Products Using Archimedesrsquo; Principle
- ASTM B934-21 Standard Test Method for Effective Case Depth of Ferrous Powder Metallurgy (PM) Parts Using Microindentation Hardness Measurements
- ASTM E259-98 Standard Practice for Preparation of Pressed Powder White Reflectance Factor Transfer Standards for Hemispherical Geometry and Bi-Directional Geometries
- ASTM E259-06 Standard Practice for Preparation of Pressed Powder White Reflectance Factor Transfer Standards for Hemispherical and Bi-Directional Geometries
- ASTM B834-95 Standard Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367) and Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625) Alloy Pipe Flanges, Fittings, Valves, and Parts
- ASTM B834-95(2003) Standard Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367) and Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625) Alloy Pipe Flanges, Fittings, Valves, and Parts
- ASTM C1110-03(2008) Standard Practice for Sample Preparation for X-Ray Emission Spectrometric Analysis of Uranium in Ores Using the Glass Fusion or Pressed Powder Method
ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Powder Direct Pressing Powder Direct Pressing
- PREN 3225-2-1993 Aerospace Series Heat Resisting Alloys Produced from Atomized Powder Powder Compacted Forging Stock and Parts Technical Specification Part 2 - Atomized Powder (Edition P 1)
- PREN 3225-3-1993 Aerospace Series Heat Resisting Alloys Produced from Atomized Powder Powder Compacted Forging Stock and Parts Technical Specification Part 3 - Hot Compacted Forging Stock (Edition P 1)
- PREN 3225-1-1993 Aerospace Series Heat Resisting Alloys Produced from Atomized Powder Powder Compacted Forging Stock and Parts Technical Specification Part 1 - General Requirements (Edition P 1)
- PREN 3225-4-1993 Aerospace Series Heat Resisting Alloys Produced from Atomized Powder Powder Compacted Forging Stock and Parts Technical Specification Part 4 - Pre-Production and Production Parts (Edition P 1)
Professional Standard - Electron, Powder Direct Pressing Powder Direct Pressing
- SJ/T 31263-1994 Requirements of readiness and methods of inspection and assessment for powder presses
SAE - SAE International, Powder Direct Pressing Powder Direct Pressing
- SAE AMS4993F-2017 Titanium Alloy@ Blended Powder Compacts@ Sintered 6Al - 4V (UNS R56400)
- SAE AMS4309A-2003 ALUMINUM ALLOY EXTRUSIONS 8.6Fe - 1.8Si - 1.3V (8009-H112) Powder Metallurgy Product@ Strain-Hardened (UNS A98009)
- SAE AMS4309-1994 Aluminum Alloy Extrusions 8.6Fe - 1.8Si - 1.3V (8009-H112) Powder Metallurgy Product@ Strain-Hardened (UNS A98009)
- SAE AMS4309B-2017 Aluminum Alloy Extrusions 8.6Fe - 1.8Se - 1.3V (8009-H112) Powder Metallurgy Product@ Strain-Hardened (UNS A98009)
- SAE AMS5899C-2019 Steel@ Corrosion-Resistant@ Bars@ Wire@ and Forgings 17Cr - 0.52Mo (0.95 - 1.20C) Powder Metallurgy Product@ Hot Isostatically Pressed (UNS S44004)
- SAE AMS6558A-2018 Steel@ Bars@ Wire@ and Forgings 10.5Mo - 6W - 3.75Cr - 2V (1.25 - 1.40C) Powder Metallurgy Product Hot Isostatically Pressed (UNS T11362)
- SAE AMS5899-1996 Steel@ Corrosion Resistant@ Bars@ Wire@ and Forgings 17Cr - 0.52Mo (0.95 - 1.20C) Powder Metallurgy Product@ Hot Isostatically Pressed (UNS S44004)
- SAE AMS6556A-2018 Steel@ Bars@ Wire@ and Forgings 8V - 4Cr - 4W - 3Mo (2.45 - 2.55C) Powder Metallurgy Product Hot Isostatically Pressed (UNS T11453)
- SAE AMS6559A-2018 Steel@ Bars@ Wire@ and Forgings 9.75V - 5.25Cr - 1.3Mo (2.40 - 2.55C) Powder Metallurgy Product Hot Isostatically Pressed (UNS T30111)
- SAE AMS6557A-2018 Steel@ Bars@ Wire@ and Forgings 9V - 5.25Cr - 1.3Mo (1.80 - 1.95C) Powder Metallurgy Product Hot Isostatically Pressed (UNS T11409)
- SAE AMS6558-2013 Steel@ Bars@ Wire@ and Forgings 10.5 Mo - 6 W - 3.75 Cr - 2 V (1.25 - 1.40 C) Powder Metallurgy Product Hot Isostatically Pressed (UNS T11362)
- SAE AMS5852C-1994 Nickel Alloy@ Corrosion and Heat Resistant@ Billets and Preforms 55Ni - 15Cr - 17Co - 5.0Mo - 3.5Ti - 0.025B Powder Metallurgy Product@ Hot Isostatically Pressed (UNS N13017)
- SAE AMS5852D-2001 Nickel Alloy@ Corrosion and Heat Resistant@ Billets and Preforms 55Ni - 15Cr - 17Co - 5.0Mo - 3.5Ti - 4.0Al - 0.025B Power Metallurgy Product@ Hot Isostatically Pressed (UNS N13017)
American Gear Manufacturers Association, Powder Direct Pressing Powder Direct Pressing
- AGMA 930-A05-2005 Calculated Bending Load Capacity of Powder Metallurgy (P/M) External Spur Gears
IN-BIS, Powder Direct Pressing Powder Direct Pressing
Aerospace, Security and Defence Industries Association of Europe (ASD), Powder Direct Pressing Powder Direct Pressing
- ASD-STAN PREN 3225-2-1993 Aerospace Series Heat Resisting Alloys Produced from Atomized Powder Powder Compacted Forging Stock and Parts Technical Specification Part 2 - Atomized Powder (Edition P 1)
- ASD-STAN PREN 3225-3-1993 Aerospace Series Heat Resisting Alloys Produced from Atomized Powder Powder Compacted Forging Stock and Parts Technical Specification Part 3 - Hot Compacted Forging Stock (Edition P 1)
- ASD-STAN PREN 3225-1-1993 Aerospace Series Heat Resisting Alloys Produced from Atomized Powder Powder Compacted Forging Stock and Parts Technical Specification Part 1 - General Requirements (Edition P 1)
- ASD-STAN PREN 3225-4-1993 Aerospace Series Heat Resisting Alloys Produced from Atomized Powder Powder Compacted Forging Stock and Parts Technical Specification Part 4 - Pre-Production and Production Parts (Edition P 1)
国家市场监督管理总局、中国国家标准化管理委员会, Powder Direct Pressing Powder Direct Pressing
- GB/T 11106-2022 Metallic powder—Determination of green strength by compression of cylinder compacts
European Association of Aerospace Industries, Powder Direct Pressing Powder Direct Pressing
- AECMA PREN 3225-1-1993 Aerospace Series Heat Resisting Alloys Produced from Atomized Powder Powder Compacted Forging Stock and Parts Technical Specification Part 1 - General Requirements Edition P 1
- AECMA PREN 3225-2-1993 Aerospace Series Heat Resisting Alloys Produced from Atomized Powder Powder Compacted Forging Stock and Parts Technical Specification Part 2 - Atomized Powder Edition P 1
- AECMA PREN 3225-3-1993 Aerospace Series Heat Resisting Alloys Produced from Atomized Powder Powder Compacted Forging Stock and Parts Technical Specification Part 3 - Hot Compacted Forging Stock Edition P 1
- AECMA PREN 3225-4-1993 Aerospace Series Heat Resisting Alloys Produced from Atomized Powder Powder Compacted Forging Stock and Parts Technical Specification Part 4 - Pre-Production and Production Parts Edition P 1
- AECMA PREN 3225-3-1990 Aerospace Series Heat Resisting Alloys Produced from Atomized Powder Powder, Compacted Forging Stock and Parts - Technical Specification - Part 3 - Hot Compacted Forging Stock
Standard Association of Australia （SAA）, Powder Direct Pressing Powder Direct Pressing
- AS 1033.2:1988 High voltage fuses (for rated voltages exceeding 1000 V) - Current-limiting (powder-filled) type
AT-ON, Powder Direct Pressing Powder Direct Pressing
- ONORM A 5561-2001 Determination of settled and compacted apparent densities of powders and granulated materials
- OENORM EN ISO 17172:2021 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of compaction properties of ceramic powders (ISO 17172:2014)
Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Powder Direct Pressing Powder Direct Pressing
- GJB 6261-2008 Specification for powder metallurgy self-lubricating thrust bearings of special vehicles engines turbochargers
Military Standard of the People's Republic of China-General Armament Department, Powder Direct Pressing Powder Direct Pressing
- GJB 8759-2015 Specification for powder metallurgy self-lubricating thrust plates for special vehicle engine turbochargers
CH-SNV, Powder Direct Pressing Powder Direct Pressing
- SN EN ISO 17172:2021 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of compaction properties of ceramic powders (ISO 17172:2014)
Professional Standard - Geology, Powder Direct Pressing Powder Direct Pressing
- DZ/T 0279.10-2016 Methods of Analysis of Regional Geochemical Samples - Part 10: Determination of Chlorine and Bromine Quantification Powder Compression - X-ray Fluorescence Spectrometry