ZH

RU

ES

Detection method of toluene concentration

Detection method of toluene concentration, Total:421 items.

In the international standard classification, Detection method of toluene concentration involves: Graphic technology, Analytical chemistry, Organic chemicals, Products of the chemical industry, Plastics, Protection against fire, Air quality, Textile fibres, Non-destructive testing, Fruits. Vegetables, Sugar. Sugar products. Starch, Spices and condiments. Food additives, Water quality, Farming and forestry, Inorganic chemicals, Metalliferous minerals, Fertilizers, Paints and varnishes, Fuels, Non-ferrous metals, Wood, sawlogs and sawn timber, Medical equipment, Vocabularies, Laboratory medicine, Cereals, pulses and derived products, Chocolate, Construction materials, Road engineering, Measurement of volume, mass, density, viscosity, Raw materials for rubber and plastics, Wood-based panels, Lubricants, industrial oils and related products, Insulating materials, Geology. Meteorology. Hydrology, Edible oils and fats. Oilseeds, Nuclear energy engineering, Non-metalliferous minerals, General methods of tests and analysis for food products, Occupational safety. Industrial hygiene, Soil quality. Pedology, Biology. Botany. Zoology, Medical sciences and health care facilities in general, Adhesives, Beverages, Welding, brazing and soldering, Optics and optical measurements, Measurement of fluid flow, Rubber and plastics products, Machine tools, Radiation protection, Radiation measurements, Paper and board, Cellular materials, Microbiology.


Professional Standard - Press and Publication, Detection method of toluene concentration

  • CY/T 11-1994 Permissible concentration and detection method of toluene and xylene in the air of gravure printing workshop

Professional Standard - Military and Civilian Products, Detection method of toluene concentration

  • WJ 2575-2002 Permissible concentration and detection method of trinitrotoluene in the air of workplace
  • WJ 2574-2002 The allowable concentration and detection method of too safe in the air of the workplace

Professional Standard - Agriculture, Detection method of toluene concentration

  • JAP-072 Method for the detection of todiuron
  • JAP-045 Copper terephthalate detection method
  • JAP-035 Method for detection of diclazuril and dimethidine alcohol
  • GB/T 5009.29-1996 Determination method of sorbic acid and benzoic acid in food
  • SN/T 3807-2014 Determination of the purity of phthalic anhydride by differential scanning calorimetry
  • 卫法监发〔2001〕159号 Notice on Printing and Distributing Test Methods for Determination of Benzoyl Peroxide in Flour and Oil
  • 农业部公告第1934号 Inspection method for illegal addition of sulfamethazine and sulfamethoxine in florfenicol preparations
  • GB/T 8032-1987 Method for Determination of Density of Coking Benzene Products

American Society for Testing and Materials (ASTM), Detection method of toluene concentration

  • ASTM D6563-05 Standard Test Method for Benzene, Toluene, Xylene (BTX) Concentrates Analysis by Gas Chromatography
  • ASTM D6563-05e1 Standard Test Method for Benzene, Toluene, Xylene (BTX) Concentrates Analysis by Gas Chromatography
  • ASTM D6563-12 Standard Test Method for Benzene, Toluene, Xylene (BTX) Concentrates Analysis by Gas Chromatography
  • ASTM D6563-11 Standard Test Method for Benzene, Toluene, Xylene (BTX) Concentrates Analysis by Gas Chromatography
  • ASTM D6563-05(2010)e1 Standard Test Method for Benzene, Toluene, Xylene (BTX) Concentrates Analysis by Gas Chromatography
  • ASTM D6563-11a Standard Test Method for Benzene, Toluene, Xylene (BTX) Concentrates Analysis by Gas Chromatography
  • ASTM D6563-00 Test Method for Benzene, Toluene, Xylene, (BTX) Concentrates Analysis by Capillary Column Gas Chromatography
  • ASTM F3414-20 Standard Test Method for Determining Ortho-Phthalate Concentration in Flooring Containing Polyvinyl Chloride
  • ASTM D2194-02(2012) Standard Test Method for Concentration of Formaldehyde Solutions
  • ASTM D2194-22 Standard Test Method for Concentration of Formaldehyde Solutions
  • ASTM D847-04 Standard Test Method for Acidity of Benzene, Toluene, Xylenes, Solvent Naphthas, and Similar Industrial Aromatic Hydrocarbons
  • ASTM D847-08 Standard Test Method for Acidity of Benzene, Toluene, Xylenes, Solvent Naphthas, and Similar Industrial Aromatic Hydrocarbons
  • ASTM D847-96(2000) Standard Test Method for Acidity of Benzene, Toluene, Xylenes, Solvent Naphthas, and Similar Industrial Aromatic Hydrocarbons
  • ASTM D847-96 Standard Test Method for Acidity of Benzene, Toluene, Xylenes, Solvent Naphthas, and Similar Industrial Aromatic Hydrocarbons
  • ASTM D847-23 Standard Test Method for Acidity of Benzene, Toluene, Xylenes, Solvent Naphthas, and Similar Industrial Aromatic Hydrocarbons
  • ASTM D847-15 Standard Test Method for Acidity of Benzene, Toluene, Xylenes, Solvent Naphthas, and Similar Industrial Aromatic Hydrocarbons
  • ASTM D847-16 Standard Test Method for Acidity of Benzene, Toluene, Xylenes, Solvent Naphthas, and Similar Industrial Aromatic Hydrocarbons
  • ASTM D1017-51(1978)e1 Test Method for Benzene and Toluene in 250F and Lighter Petroleum Products by Ultraviolet Spectrophotometry
  • ASTM D5492-17 Standard Test Method for Determination of Xylene Solubles in Propylene Plastics
  • ASTM D5004-89(2004)e1 Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement
  • ASTM D1107-96 Standard Test Method for Ethanol-Toluene Solubility of Wood
  • ASTM D1107-21 Standard Test Method for Ethanol-Toluene Solubility of Wood,
  • ASTM D5004-89(1999) Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement
  • ASTM D5546-94a Standard Test Method for Solubility of Asphalt Binders in Toluene by Centrifuge
  • ASTM D5546-01 Standard Test Method for Solubility of Asphalt Binders in Toluene by Centrifuge
  • ASTM D5546-09 Standard Test Method for Solubility of Asphalt Binders in Toluene by Centrifuge
  • ASTM D5580-00 Standard Test Method for Determination of Benzene, Toluene, Ethylbenzene, p/m-Xylene, o-Xylene, C9 and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography
  • ASTM D5580-02 Standard Test Method for Determination of Benzene, Toluene, Ethylbenzene, p/m-Xylene, o-Xylene, C9 and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography
  • ASTM D5580-02(2007) Standard Test Method for Determination of Benzene, Toluene, Ethylbenzene, p/m-Xylene, o-Xylene, C9 and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography
  • ASTM D5580-15 Standard Test Method for Determination of Benzene, Toluene, Ethylbenzene, p/m-Xylene, o-Xylene, C9 and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography
  • ASTM D5580-13 Standard Test Method for Determination of Benzene, Toluene, Ethylbenzene, p/m-Xylene, o-Xylene, C9 and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography
  • ASTM D6007-02(2008) Standard Test Method for Determining Formaldehyde Concentration in Air from Wood Products Using a Small Scale Chamber
  • ASTM D7884-13 Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Reverse Phase High Performance Liquid Chromatography
  • ASTM E1333-10 Standard Test Method for Determining Formaldehyde Concentrations in Air and Emission Rates from Wood Products Using a Large Chamber
  • ASTM D2088-73 Method for Determination of Low Concentrations of Lead in Paint
  • ASTM C1785-16a Standard Test Method for Concentration of Pinhole Detections in Moisture Barriers on Metal Jacketing
  • ASTM D6007-02 Standard Test Method for Determining Formaldehyde Concentration in Air from Wood Products Using a Small Scale Chamber
  • ASTM D6007-96 Standard Test Method for Determining Formaldehyde Concentration in Air from Wood Products Using a Small Scale Chamber
  • ASTM D6007-22 Standard Test Method for Determining Formaldehyde Concentrations in Air from Wood Products Using a Small-Scale Chamber
  • ASTM D6007-14 Standard Test Method for Determining Formaldehyde Concentrations in Air from Wood Products Using a Small-Scale Chamber
  • ASTM D5004-89(2009) Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement
  • ASTM D5004-11(2017) Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement
  • ASTM D2023-89(2003) Standard Test Method of Analysis for Sodium Toluene Sulfonate in Detergents
  • ASTM E1938-13(2018) Standard Test Method for Determination of Titanium in Nickel Alloys by Diantipyrylmethane Spectrophotometry
  • ASTM C1785-15 Standard Test Method for Concentration of Pinhole Detections in Moisture Barriers on Metal Jacketing
  • ASTM D2462-90(1995) Standard Test Method for Moisture in Wool by Distillation With Toluene
  • ASTM D2462-90(2001) Standard Test Method for Moisture in Wool by Distillation With Toluene
  • ASTM D4590-22 Standard Test Method for Colorimetric Determination of p-tert-Butylcatechol In Styrene Monomer or AMS (α–Methylstyrene) by Spectrophotometry
  • ASTM E267-90(1995) Standard Test Method for Uranium and Plutonium Concentrations and Isotopic Abundances
  • ASTM D7883-13 Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Weak Anion Exchange High Performance Liquid Chromatography
  • ASTM D1721-97(2001) Standard Test Method for Permanganate Time of Tricresyl Phosphate
  • ASTM D1721-97(2007) Standard Test Method for Permanganate Time of Tricresyl Phosphate
  • ASTM D3606-20e1 Standard Test Method for Determination of Benzene and Toluene in Spark Ignition Fuels by Gas Chromatography
  • ASTM D3606-20 Standard Test Method for Determination of Benzene and Toluene in Spark Ignition Fuels by Gas Chromatography
  • ASTM D3606-22 Standard Test Method for Determination of Benzene and Toluene in Spark Ignition Fuels by Gas Chromatography
  • ASTM D3606-17 Standard Test Method for Determination of Benzene and Toluene in Spark Ignition Fuels by Gas Chromatography
  • ASTM D1583-01(2008) Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films
  • ASTM D7881-13 Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Capillary Electrophoresis with Reverse Voltage Mode
  • ASTM D7882-13 Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Capillary Electrophoresis with Normal Voltage Mode
  • ASTM D5836-95 Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Workplace Atmospheres (1-2 PP Method)
  • ASTM D5836-20 Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Workplace Atmospheres (1-2 PP Method)
  • ASTM D3606-21 Standard Test Method for Determination of Benzene and Toluene in Spark Ignition Fuels by Gas Chromatography
  • ASTM D4590-06 Standard Test Method for Colorimetric Determination of p-tert-Butylcatechol In Styrene Monomer or AMS (alpha-Methylstyrene) by Spectrophotometry
  • ASTM D5580-15(2020) Standard Test Method for Determination of Benzene, Toluene, Ethylbenzene, p/m-Xylene, o-Xylene, C9 and Heavier Aromatics, and Total Aromat
  • ASTM D5580-21 Standard Test Method for Determination of Benzene, Toluene, Ethylbenzene, p/m-Xylene, o-Xylene, C9 and Heavier Aromatics, and Total Aromat
  • ASTM D2023-89(1995)e1 Standard Test Method of Analysis for Sodium Toluene Sulfonate in Detergents
  • ASTM D2462-90(2008) Standard Test Method for Moisture in Wool by Distillation With Toluene
  • ASTM D2462-22 Standard Test Method for Moisture in Wool by Distillation With Toluene
  • ASTM D2462-13 Standard Test Method for Moisture in Wool by Distillation With Toluene
  • ASTM E681-09 Standard Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases)
  • ASTM D5932-08(2013) Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Air (with 9-(N-Methylaminomethyl) Anthracene Method) (MAMA) in the Workplace
  • ASTM D3977-97(2019) Standard Test Methods for Determining Sediment Concentration in Water Samples
  • ASTM D5932-08(2013)e1 Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Air (with 9-(N-Methylaminomethyl) Anthracene Method) (MAMA) in the Workplace
  • ASTM D5769-20 Standard Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography/Mass Spectrometry
  • ASTM D5004-11 Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement
  • ASTM D5492-98(2003)e1 Standard Test Method for Determination of Xylene Solubles in Propylene Plastics
  • ASTM D5492-98(2003) Standard Test Method for Determination of Xylene Solubles in Propylene Plastics
  • ASTM D3606-04 Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography
  • ASTM D5769-98 Standard Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography/Mass Spectrometry
  • ASTM E1333-14 Standard Test Method for Determining Formaldehyde Concentrations in Air and Emission Rates from Wood Products Using a Large Chamber
  • ASTM D4603-03 Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer
  • ASTM D6331-14 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations &40;Manual Gravimetric Method&41;
  • ASTM D5932-08 Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Air (with 9-(N-Methylaminomethyl) Anthracene Method) (MAMA) in the Workplace
  • ASTM D4864-90(2000)e1 Standard Test Method for Determination of Traces of Methanol in Propylene Concentrates by Gas Chromatography
  • ASTM D5953M-96(2001) Standard Test Method for Determination of Non-Methane Organic Compounds (NMOC) in Ambient Air Using Cryogenic Preconcentration and Direct Flame Ionization Detection Method (Metric)
  • ASTM D2379-09(2023) Standard Test Method for Acidity of Formaldehyde Solutions

CZ-CSN, Detection method of toluene concentration

  • CSN 65 0351-1967 Testing methods of phthalates
  • CSN 58 8774-1994 Methods of test for fats and oils Spectrophotometric determination of benzoic acid
  • CSN 64 0236-1963 Detection of free Amonia in phenol ormaldehyde mouldings Qualitative method)
  • CSN 58 8772-1994 Methods of test for fats and oils Determination and detection of ethyl and propyl ester of p-hydroxybenzoic acid
  • CSN 66 8102 Cast.25-1978 Smokeless powders. Methods of testing. Determination of 2,4-dinitrotoluene
  • CSN 65 9022-1983 Reaktive dyestuffs. Method of concentration. and shade determinatlon.
  • CSN 65 9220-1987 Sulphur dyestuffs. Method of dye concentration and shade determination
  • CSN 65 9002-1987 Direct dyestuffs Method of dye concentration and shade determination

国家质量监督检验检疫总局, Detection method of toluene concentration

  • SN/T 4442-2016 Detection methods for nitrobenzene, nitrotoluene and dinitrotoluene in imported and exported cosmetics
  • SN/T 3147-2017 Determination method of phthalates in exported foods

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Detection method of toluene concentration

  • GB/T 6489.2-2001 Phthalate esters for industrial use-Methods of test--Determination of acidity
  • GB/T 18932.14-2003 Method for the determination of benzaldehyde residues in honey-HPLC-fluorescence detection method
  • GB/T 26310.1-2010 Carbonaceous materials used in the production of aluminium.Calcined coke.Part 1:Determination of the density in xylene.Pyknometric method
  • GB/T 14375-1993 Water quality. Determination of monomethyl hydrazine. p-Dimethylaminobenzaldegyde spectrophotometric method
  • GB/T 6730.31-1986 Methods for chemical analysis of iron ores--The benzoylphenylhydroxylamine extraction photometric method for the determination of vanadium content
  • GB/T 12009.3-1989 Polymethylene polyphenyl isocyanate--Determination of viscosity
  • GB/T 15507-1995 Water quality--Determination of hydrazine--p-Dime-tylaminobenzaldehyde spectrophotometric method
  • GB/T 6987.13-2001 Aluminium and aluminium alloys--Determination of vanadium content--N-benzoyl-Nphenylhydroxylamine spectrophotometric method
  • GB/T 3257.12-1999 Methods for chemical analysis of bauxite--Determination of vanadium pentoxide content--N-benzoyl-N-phenythyroxylamine photometric method
  • GB/T 6489.3-2001 Phthalate esters for industrial use-Methods of test-Determination of ester content-Titrimetric method after saponification
  • GB/T 6489.1-2001 Phthalate esters for industrial use-Methods of test-Measurement of colour after heat treatment
  • GB/T 13747.18-1992 Zirconium and zirconium alloys--Determination of vanadium content--N-benzoyl-N-phenylhydroxylamine spectrophotometric method
  • GB/T 18415-2001 Methods of determination for benzoyl peroxide in wheat flour
  • GB/T 31705-2015 In situ measurement of background atmospheric carbon dioxide and methane concentration by gas chromatographic (GC) system
  • GB/T 20975.13-2008 Methods for chemical analysis of aluminium and aluminium alloys.Part 13:Determination of vanadium content.N-benzoyl-Nphenylhydroxylamine spectrophotometric method
  • GB/T 30921.1-2014 Test method of purified terephthalic acid (PTA) for industrial use.Part 1:Determination of concentrations of 4-carboxybenzaldehyde (4-CBA) and p-toluic acid (p-TOL)
  • GB/T 11848.13-1991 Determination of zirconium in uranium ore concentrate by xylenol orange spectrophotometric method
  • GB/T 6609.10-1986 Methods for the chemical analysis of aluminium oxide--The N-benzoyl-N-phenylhydroxylamine extraction photometric method for the determination of vanadic oxide content
  • GB/T 4102.11-1983 Methods for chemical analysis of high-titanium slag and rutile--The benzoyl phenylhydroxylamine extraction photometric method for the determination of vanadium pentoxide content
  • GB/T 16147-1995 Scintillation flask method for measuring radon concentration in the air
  • GB/T 13748.7-2005 Chemical analysis methods of magnesium and magnesium alloys.Determination of zirconium content.Xylenol orange spectrophotometric method
  • GB/T 30921.6-2016 Test method of purified terephthalic acid (PTA) for industrial use.Part 6:Determination of particle size distribution
  • GB/T 6609.10-2004 Chemical analysis methods and determination of physical performance of alumina Determination of vanadic oxide content-N-benzoyI-N-phenylhydroxylamine extraction photometric method
  • GB/T 13748.3-1992 Magnesium and its alloys--Determination of zirconium content--Xylenol orange spectrophotometric method
  • GB/T 8038-1987 Toluene of coal carbonization--Determination of hydrocarbon impurities-gas chromatographic method
  • GB/T 8038-2009 Toluene of coal carbonization-Determination of hydrocarbon impurities gas chromatographic method
  • GB/T 23573-2009 Metal cutting machine tools.Determining method of dust concentration
  • GB/T 23574-2009 Metal cutting machines tools.Determination methods of oil mist concentration
  • GB/T 31709-2015 Data processing of background atmospheric carbon dioxide and methane concentration measured by in situ gas chromatographic (GC) system
  • GB/T 30921.4-2016 Test method of purified terephthalic acid (PTA) for industrial use.Part 4: Determination of titanium content.Diantipyrylmethane photometric method
  • GB/T 16113-1995 Workplace air--Determination of 2,4,6-trinitrotoluene--Gas chromatographic method
  • GB/T 16048-1995 Workplace air--Determination of toluene--Thermal desorption gas chromatographic method
  • GB/T 6609.18-1986 Methods for the chemical analysis of aluminium oxide--The N,N-dimethyl-P-phenylenediamine photometric method for the determination of sulfate content
  • GB/T 4375.1-1984 Methods for chemical analysis of gallium--The 2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline photometric method for the determination of copper content

Japanese Industrial Standards Committee (JISC), Detection method of toluene concentration

  • JIS A 1306:2014 Measuring method of smoke density using light extinction method
  • JIS A 1306:1983 Measuring method of smoke density using light extinction method
  • JIS K 0554:1995 Testing methods for concentration of fine particles in highly purified water
  • JIS A 1306 AMD 1:2008 Measuring method of smoke density using light extinction method (Amendment 1)
  • JIS K 6751-2:1999 Testing methods for phthalic esters -- Part 2: Determination of acidity to phenolphthalein -- Titrimetric method
  • JIS Z 8808:2013 Methods of measuring dust concentration in flue gas
  • JIS Z 8808:1995 Methods of measuring dust concentration in flue gas
  • JIS K 0450-50-10:2004 Testing method for benzophenone in industrial water and wastewater
  • JIS K 1603:1985 Testing methods for polymethylene polyphenyl polyisocyanate (testing methods for polymeric MDI)
  • JIS Z 8852:2013 Methods of continuous measurement for dust concentration in flue gas
  • JIS Z 3952:2005 Methods of measurement for gas concentration in welding environment
  • JIS K 6751-3 ERRATUM 1:2002 Testing methods for phthalic esters -- Part 3: Determination of ester content -- Titrimetric method after saponification (Erratum 1)
  • JIS K 0450-30-10:2002 Testing method for phthalic acid esters in industrial water and wastewater
  • JIS K 0450-30-10:2006 Testing method for phthalic acid esters in industrial water and wastewater
  • JIS Z 4512:1995 Measuring methods of concentration of airborne radioactive particle
  • JIS Z 3950:2021 Methods of measurement for airborne dust concentration in welding environment
  • JIS Z 3950:2005 Methods of measurement for airborne dust concentration in welding environment

Association Francaise de Normalisation, Detection method of toluene concentration

  • NF EN ISO 25140:2010 Émissions de sources fixes - Méthode automatique pour la détermination de la concentration en méthane par détection à ionisation de flamme (FID)
  • NF EN ISO 15181-5:2008 Peintures et vernis - Détermination du taux de lixiviation des biocides contenus dans les peintures antisalissures - Partie 5 : calcul du taux de lixiviation du tolylfluanide et du dichlofluanide par détermination de la concentration du diméthyl-tol...
  • NF X43-356*NF EN ISO 25139:2011 Stationary source emissions - Manual method for the determination of the methane concentration using gas chromatography.
  • NF EN ISO 25139:2011 Émissions de sources fixes - Méthode manuelle pour la détermination de la concentration en méthane par chromatographie en phase gazeuse
  • NF X43-353*NF EN ISO 25140:2010 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID).
  • NF EN 15549:2008 Qualité de l'air - Méthode normalisée pour le mesurage de la concentration du benzo[a]pyrene dans l'air ambiant
  • NF T20-499:1979 Condensed phosphates for industrial use (including foodstuffs). Determination of oxides of nitrogen content. 3,4-xylenol spectrophotometric method.
  • NF X43-560*NF EN 15549:2008 Air quality - Standard method for the measurement of the concentration of Benzo[a]pyrene in ambient air
  • NF T30-110-5*NF EN ISO 15181-5:2008 Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 5 : calculation of the tolyfluanid and dichlofluanid release rate by determination of the concentration of dimethyltolylsulfamide (DMST) and dimethylphenylsulf
  • NF M60-816*NF EN ISO 9697:2019 Water quality - Gross beta activity - Test method using thick source
  • NF M60-815*NF EN ISO 9696:2017 Water quality - Gross alpha activity - Test method using thick source
  • NF EN 17041:2018 Engrais - Dosage du bore dans des concentrations inférieures ou égales à 10 % par spectrométrie avec l'azométhine H
  • NF U42-466*NF EN 17041:2018 Fertilizers - Determination of boron in concentrations less than or equal to 10 % using spectrometry with azomethine-H
  • NF ISO 17197:2019 Diméthylether (DME) pour carburants et combustibles - Détermination de la teneur en eau - Méthode par titrage Karl Fischer
  • NF EN 50676:2019 Appareils électriques utilisés pour la détection et la mesure de la concentration de gaz frigorigènes - Exigences de performance et méthodes d'essai
  • NF X43-029-3:2005 Ambient air quality - Standard method for the measurement of benzene concentrations - Part 3 : automated pumped sampling with in situ gas chromatography.

Professional Standard - Commodity Inspection, Detection method of toluene concentration

  • SN/T 2933-2011 Methods for the detection of chloroform, benzene, carbon tetrachloride, chloropicrin, nitrobenzene and dichlorotoluene in cosmetics
  • SN/T 3861-2014 Determination of hexachlorovaraxrene residues in foodstuffs for export
  • SN/T 2012-2007 Determination of benzoic acid and sorbic acid in vinegar for export and import.Liquid chromatography
  • SN/T 3529-2013 Determination of 2,4-diaminophenol,2,3-diaminophenol and 2,4-diaminoanisole in hair dyes for import and export
  • SN/T 3794-2014 Determination of colourity of purified terephthalic acid for industrial use.Spectrophtometric method
  • SN/T 1121-2002 Determination method of benzoic acid, sorbic acid and paraben preservatives in traditional Chinese medicine preparations by liquid chromatography
  • SN/T 1975-2007 Determination of difenoconazole residue in food for import and export.GC-MS method
  • SN/T 4006-2013 Determination of phthalates in leather products

国家市场监督管理总局、中国国家标准化管理委员会, Detection method of toluene concentration

  • GB/T 39765-2021 Determination of benzene,methylbenzene,ethylbenzene,dimethybenzene in stationery—Gas chromatographic method
  • GB/T 41456-2022 Nanotechnologies—Determination of the concentration of nanometer titanium dioxide airborne dust in workplace—Spectrophotometry method

Korean Agency for Technology and Standards (KATS), Detection method of toluene concentration

  • KS I ISO 25140-2012(2017) Stationary source emissions-Automatic method for the determination of the methane concentration using flame ionization detection(FID)
  • KS I ISO 25140:2022 Stationary source emissions — Automatic method for the determination of the methane concentration using flame ionization detection(FID)
  • KS M 1912-2009 Phthalic anhydride for industrial use-Methods of test-Determination of maleic anhydride content-Polarographic method
  • KS K 0149-2018 Testing method for BHT(Butylated Hydroxy Toluene) in textile
  • KS I ISO 25139-2013(2018) Stationary source emissions ― Manual method for the determination of the methane concentration using gas chromatography
  • KS M 3003-2008(2018) Test method for phthalic acid ester
  • KS M 1911-2009 Phthalic anhydride for industrial use-Methods of test-Determination of phthalic anhydride content-Titrimetric method
  • KS I ISO 25139:2013 Stationary source emissions ― Manual method for the determination of the methane concentration using gas chromatography
  • KS M 1910-2009 Phthalic anhydride for industrial use-Methods of test-Determination of free acidity-Potentiometric method
  • KS M 1910-2002(2007) Phthalic anhydride for industrial use-Methods of test-Determination of free acidity-Potentiometric method
  • KS M 2105-1995 Methods of measuring dust concentration in flue gas
  • KS M 2105-2005(2010) Methods of measuring dust concentration in flue gas
  • KS M 1991-2011 Determination of phthalates contents in polymer materials
  • KS M 0107-1993 Testing methods for concentration of fine particles in highly purified water
  • KS M 1916-2002(2007) Phthalic anhydride for industrial use-Methods of test-Determination of iron content-2,2′-bipyridyl photometric method
  • KS M ISO 1618-2002(2012) Aluminium oxide primarily used for the production of aluminium-Determination of vanadium content-N-Benzoyl-N-phenylhydroxylamine photometric method
  • KS M ISO 1618:2002 Aluminium oxide primarily used for the production of aluminium-Determination of vanadium content-N-Benzoyl-N-phenylhydroxylamine photometric method
  • KS M ISO 1618:2013 Aluminium oxide primarily used for the production of aluminium-Determination of vanadium content-N-Benzoyl-N-phenylhydroxylamine photometric method
  • KS B 0546-2021 Methods of measurement for gas concentration in welding environment
  • KS M 1913-2002(2007) Phthalic anhydride for industrial use-Methods of test-Determination of ash
  • KS A 4513-2000 MEASURING METHODS OF B RADIOACTIVITY CONCENTRATION OF DRAIN WATER
  • KS A 4513-1985 MEASURING METHODS OF B RADIOACTIVITY CONCENTRATION OF DRAIN WATER
  • KS M 1916-2009 Phthalic anhydride for industrial use-Methods of test-Determination of iron content-2,2′-bipyridyl photometric method
  • KS M 1908-2009 Phthalic anhydride for industrial use-Methods of test-Measurement of colour stability
  • KS D 0061-2021 Methods for measurement of dust concentration in welding environment
  • KS I ISO 10705-3:2021 Water quality — Detection and enumeration of bacteriophages —Part 3: Validation of methods for concentration of bacteriophages from water
  • KS I ISO 14965:2007 Air quality-Determination of total non-methane organic compounds-Cryogenic preconcentration and direct flame ionization detection method
  • KS I ISO 14965:2017 Air quality-Determination of total non-methane organic compounds-Cryogenic preconcentration and direct flame ionization detection method

RU-GOST R, Detection method of toluene concentration

  • GOST R ISO 25140-2017 Stationary source emissions. Automatic method for the determination of the methane concentration using flame ionisation detection
  • GOST R ISO 25139-2015 Stationary source emissions. Manual method for the determination of the methane concentration using gas chromatography
  • GOST 33839-2016 Confectionery. Method for determination of mass fraction of benzoic acid
  • GOST 11235-1975 Phenolformaldehyde resins. Methods for determination of free phenol
  • GOST R 50484-1993 Phthalic anhydride for industrial use. Methods of test. Part 4. Determination of phthalic anhydride content. Titrimetric method
  • GOST 13005-1967 Interferometers for determination of liqnid and gas concentration. Methods and means for verification
  • GOST 1057-2014 Solvent-extracted oils. Method for the determination of phenol and creso
  • GOST 33296-2015 Residual fuel oils. Test for straight-run. Method for determination of toluene equivalent
  • GOST R 50837.3-1995 Residual fuel oils. Test for straight-run. Method for determination of toluene equivalent
  • GOST 28959-1991 Nitric acid for industrial use. Evaluation of the nitric acid concentration by measurement of density
  • GOST 33288-2015 Residual fuel oils. Test for straight-run. Method for determination of xylene equivalent
  • GOST R 50837.4-1995 Residual fuel oils. Test for straight-run. Method for determination of xylene equivalent
  • GOST 18165-1989 Drinking water. Method for determination of aluminium mass concentration
  • GOST 4152-1989 Drinking water. Method for determination of arsenic mass concentration
  • GOST 27753.4-1988 Greenhouse grounds. Method for determination of total salts content
  • GOST R 52391-2005 Wine production. Method for determination of citric acid mass concentration
  • GOST 32113-2013 Alcoholic products and raw materials for their production. Enzymatic method for determination of citric acid mass fraction

Military Standard of the People's Republic of China-General Armament Department, Detection method of toluene concentration

  • GJB 533.28-1988 Detection methods for 45 components of submarine cabin air. Determination of benzene, toluene, ethylbenzene, xylene, and 1,2-dichloroethane content by gas chromatography.
  • GJB 533.33-1991 Detection method of air components in submarine cabin. Determination of cumene, n-propylbenzene, tert-butylbenzene, n-butylbenzene, 1,3,5-trimethylbenzene (including other butylbenzene) and 1,2,4-trimethylbenzene in gas phase. chromatography
  • GJB 533.33A-2021 Part 33 of the method for detecting air components in submarine cabins: Cumene, n-propylbenzene, tert-butylbenzene, n-butylbenzene, sec-butylbenzene, 1,3,5-trimethylbenzene (including other butylbenzene), 1,2, 4-Determination of trimethylbenzene content b
  • GJB 5131-2002 The allowable concentration of Okotokin in the air in the workplace and its detection method

Danish Standards Foundation, Detection method of toluene concentration

  • DS/EN ISO 25140:2010 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID)
  • DS/CEN/TS 17638:2021 Stationary source emissions – Manual method for the determination of the mass concentration of formaldehyde – Reference method
  • DS/EN ISO 25139:2011 Stationary source emissions - Manual method for the determination of the methane concentration using gas chromatography
  • DS/EN 15549:2008 Air quality - Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air
  • DS/EN ISO 15181-5:2008 Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 5: Calculation of the tolylfluanid and dichlofluanid release rate by determination of the concentration of dimethyltolylsulfamide (DMST) and dimethylphenylsulf
  • DS/EN 14625:2012 Ambient air - Standard method for the measurement of the concentration of ozone by ultraviolet photometry

KR-KS, Detection method of toluene concentration

  • KS I ISO 25140-2022 Stationary source emissions — Automatic method for the determination of the methane concentration using flame ionization detection(FID)
  • KS I ISO 10705-3-2015 Water quality — Detection and enumeration of bacteriophages — Part 3: Validation of methods for concentration of bacteriophages from water
  • KS I ISO 10705-3-2021 Water quality — Detection and enumeration of bacteriophages —Part 3: Validation of methods for concentration of bacteriophages from water

International Organization for Standardization (ISO), Detection method of toluene concentration

  • ISO 1897-7:1977 Phenol, o-cresol, m-cresol, p-cresol, cresylic acid and xylenols for industrial use; Methods of test; Part VII : Measurement of colour (Cresylic acid and xylenols only)
  • ISO 25140:2010 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID)
  • ISO 22855:2008 Fruit and vegetable products - Determination of benzoic acid and sorbic acid concentrations - High-performance liquid chromatography method
  • ISO 1897-11:1983 Phenol, o-cresol, m-cresol, p-cresol, cresylic acid and xylenols for industrial use; Methods of test; Part 11 : Determination of crystallizing point (Excluding cresylic acid and xylenols)
  • ISO 1897-8:1977 Phenol, o-cresol, m-cresol, p-cresol, cresylic acid and xylenols for industrial use; Methods of test; Part VIII : Determination of o-cresol content (Cresylic acid and xylenols only)
  • ISO 25139:2011 Stationary source emissions - Manual method for the determination of the methane concentration using gas chromatography
  • ISO 1897-2:1977 Phenol, o-cresol, m-cresol, p-cresol, cresylic acid and xylenols for industrial use; Methods of test; Part II : Determination of water; Dean and Stark method
  • ISO 1897-12:1983 Phenol, o-cresol, m-cresol, p-cresol, cresylic acid and xylenols for industrial use; Methods of test; Part 12 : Determination of distillation characteristics (Cresylic acid and xylenols only)
  • ISO 1897-13:1983 Phenol, o-cresol, m-cresol, p-cresol, cresylic acid and xylenols for industrial use; Methods of test; Part 13 : Determination of residue on distillation (Cresylic acid and xylenols only)
  • ISO 1897-9:1977 Phenol, o-cresol, m-cresol, p-cresol, cresylic acid and xylenols for industrial use; Methods of test; Part IX : Determination of m-cresol content (Cresylic acid only)
  • ISO 1897-10:1982 Phenol, o-cresol, m-cresol, p-cresol, cresylic acid and xylenols for industrial use; Methods of test; Part 10 : Determination of dry residue after evaporation on a water bath (Excluding cresylic acid and xylenols)
  • ISO 1897-3:1977 Phenol, o-cresol, m-cresol, p-cresol, cresylic acid and xylenols for industrial use; Methods of test; Part 3 : Determination of neutral oils and pyridine bases
  • ISO 15181-5:2008 Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 5: Calculation of the tolylfluanid and dichlofluanid release rate by determination of the concentration of dimethyltolylsulfamide (DMST) and dimethylphenylsulf
  • ISO 9208:1989 Aluminium ores; determination of vanadium content; BPHA spectrophotometric method
  • ISO 1389-6:1977 Phthalic anhydride for industrial use; Methods of test; Part VI : Determination of phthalic anhydride content; Titrimetric method
  • ISO 1385-2:1977 Phathalate esters for industrial use; Methods of test; Part II : Measurement of colour after heat treatment (Diallyl phthalate excluded)
  • ISO 1389-2:1977 Phthalic anhydride for industrial use; Methods of test; Part II : Measurement of colour of the molten material
  • ISO 1389-3:1977 Phthalic anhydride for industrial use; Methods of test; Part III : Measurement of colour stability
  • ISO 1618:1976 Aluminium oxide primarily used for the production of aluminium; Determination of vanadium content; N-Benzoyl-N-phenylhydroxylamine photometric method
  • ISO 1389-5:1977 Phthalic anhydride for industrial use; Methods of test; Part V : Determination of free acidity; Potentiometric method
  • ISO 5518:2007 Fruits, vegetables and derived products - Determination of benzoic acid content - Spectrophotometric method
  • ISO 5518:1978 Fruits, vegetables and derived products; Determination of benzoic acid content; Spectrophotometric method
  • ISO 1389-4:1977 Phthalic anhydride for industrial use; Methods of test; Part IV : Measurement of colour after treatment with sulphuric acid
  • ISO 1389-11:1977 Phthalic anhydride for industrial use — Methods of test — Part 11: Determination of iron content — 2,2'- Bipyridyl photometric method
  • ISO 14965:2000 Air quality - Determination of total non-methane organic compounds - Cryogenic preconcentration and direct flame ionization detection method

Professional Standard - Non-ferrous Metal, Detection method of toluene concentration

  • YS/T 63.8-2006 Carbonaceous materials used in the production of aluminium-Part 8:Determination of the density in xylene by a pyknometric method
  • YS/T 575.12-2006 Method for chemical analysis of bauxite ore- Benzoyl phenylene spectrophotometric method for the determination of vanadium pentoxide
  • YS/T 575.12-2007 Methods for chemical analysis of bauxite.Part 12:Determination of vanadium pentoxide content.N-benzoy-N-phenythytoxy lamine photometric method
  • YS/T 514.11-2006 High titanium slag, rutile chemical analysis method Benzoyl benzene ketone extraction photometric method Determination of vanadium pentoxide content
  • YS/T 520.1-2006 Gallium chemical analysis method 2,9-Dimethyl-4,7-diphenyl-1,10-phenanthrene-diazepine spectrophotometric determination of copper content

British Standards Institution (BSI), Detection method of toluene concentration

  • BS PD CEN/TS 17638:2021 Stationary source emissions. Manual method for the determination of the mass concentration of formaldehyde. Reference method
  • BS EN ISO 25140:2010 Stationary source emissions. Automatic method for the determination of the methane concentration using flame ionisation detection (FID)
  • BS EN ISO 25139:2011 Stationary source emissions. Manual method for the determination of the methane concentration using gas chromatography
  • BS EN ISO 15181-5:2008 Paints and varnishes. Determination of release rate of biocides from antifouling paints. Calculation of the tolylfluanid and dichlofluanid release rate by determination of the concentration of dimethyltolylsulfamide (DMST) and dimethylphenylsulfamide (...
  • BS EN 15549:2008 Air quality - Standard method for the measurement of the concentration of benzo(a)pyrene in ambient air
  • BS EN 17041:2018 Fertilizers. Determination of boron in concentrations ≤ 10 % using spectrometry with azomethine-H
  • BS 684-2.36:1983 Methods of analysis of fats and fatty oils. Other methods. Determination of butylhydroxyanisole (BHA) and butylhydroxytoluene (BHT)
  • BS EN 14662-1:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Pumped sampling followed by thermal desorption and gas chromatography
  • BS EN 14662-1:2005(2010) Ambient air quality - Standard method for measurement of benzene concentrations - Pumped sampling followed by thermal desorption and gas chromatography
  • BS EN 14662-3:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Automated pumped sampling with in situ gas chromatography
  • BS EN 14662-4:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Diffusive sampling followed by thermal desorption and gas chromatography
  • BS EN 14662-4:2005(2010) Ambient air quality - Standard method for measurement of benzene concentrations - Diffusive sampling followed by thermal desorption and gas chromatography
  • BS EN 14662-2:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Pumped sampling followed by solvent desorption and gas chromatography
  • BS EN 14662-5:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Diffusive sampling followed by solvent desorption and gas chromatography
  • BS EN 14662-5:2005(2010) Ambient air quality - Standard method for measurement of benzene concentrations - Diffusive sampling followed by solvent desorption and gas chromatography
  • BS EN 14662-2:2005(2010) Ambient air quality - Standard method for measurement of benzene concentrations - Pumped sampling followed by solvent desorption and gas chromatography
  • BS EN 50676:2019 Electrical equipment used for detection and concentration measurement of refrigerant gases. Performance requirements and test methods
  • BS ISO 5518:2007 Fruits, vegetables and derived products - Determination of benzoic acid content - Spectrophotometric method
  • BS 5946:1980 Method of test for determination of the punking behaviour of phenol-formaldehyde foam
  • BS EN 14662-3:2015 Tracked Changes. Ambient air. Standard method for the measurement of benzene concentrations. Automated pumped sampling with in situ gas chromatography
  • BS EN 14625:2012 Ambient air. Standard method for the measurement of the concentration of ozone by ultraviolet photometry

IT-UNI, Detection method of toluene concentration

  • UNI CEN/TS 17638-2021 Stationary source emissions - Manual method for the determination of the mass concentration of formaldehyde - Reference method

Lithuanian Standards Office , Detection method of toluene concentration

  • LST CEN/TS 17638-2021 Stationary source emissions - Manual method for the determination of the mass concentration of formaldehyde - Reference method
  • LST EN ISO 25140:2010 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID) (ISO 25140:2010)
  • LST EN 15549-2008 Air quality - Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air
  • LST EN ISO 15181-5:2008 Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 5: Calculation of the tolylfluanid and dichlofluanid release rate by determination of the concentration of dimethyltolylsulfamide (DMST) and dimethylphenylsulf
  • LST EN ISO 25139:2011 Stationary source emissions - Manual method for the determination of the methane concentration using gas chromatography (ISO 25139:2011)
  • LST EN 14625-2012 Ambient air - Standard method for the measurement of the concentration of ozone by ultraviolet photometry

European Committee for Standardization (CEN), Detection method of toluene concentration

  • PD CEN/TS 17638:2021 Stationary source emissions - Manual method for the determination of the mass concentration of formaldehyde - Reference method
  • EN 15549:2008 Air quality - Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air
  • CEN EN 15549-2008 Air quality — Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air
  • EN ISO 15181-5:2008 Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 5: Calculation of the tolylfluanid and dichlofluanid release rate by determination of the concentration of dimethyltolylsulfamide (DMST) and dimethylphenylsul
  • EN 17041:2018 Fertilizers - Determination of boron in concentrations ��10 % using spectrometry with azomethine-H
  • EN ISO 25139:2011 Stationary source emissions - Manual method for the determination of the methane concentration using gas chromatography (ISO 25139:2011)
  • EN ISO 25140:2010 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID) (ISO 25140:2010)
  • EN 14662-4:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography
  • EN 14662-3:2005 Ambient Air Quality - Standard method for the measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography
  • EN 14662-3:2015 Ambient air - Standard method for the measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography
  • EN 14625:2012 Ambient air - Standard method for the measurement of the concentration of ozone by ultraviolet photometry

HU-MSZT, Detection method of toluene concentration

AENOR, Detection method of toluene concentration

  • UNE-EN ISO 25140:2011 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID) (ISO 25140:2010)
  • UNE-EN 15549:2008 Air quality - Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air
  • UNE-EN ISO 15181-5:2008 Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 5: Calculation of the tolylfluanid and dichlofluanid release rate by determination of the concentration of dimethyltolylsulfamide (DMST) and dimethylphenylsulf
  • UNE-EN ISO 25139:2011 Stationary source emissions - Manual method for the determination of the methane concentration using gas chromatography (ISO 25139:2011)
  • UNE-EN 14625:2013 Ambient air - Standard method for the measurement of the concentration of ozone by ultraviolet photometry

German Institute for Standardization, Detection method of toluene concentration

  • DIN EN ISO 25140:2010-12 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID) (ISO 25140:2010); German version EN ISO 25140:2010
  • DIN CEN/TS 17638:2021-09 Stationary source emissions - Manual method for the determination of the mass concentration of formaldehyde - Reference method; German version CEN/TS 17638:2021
  • DIN EN 15549:2008 Air quality - Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air; German version EN 15549:2008
  • DIN EN 15549:2008-06 Air quality - Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air; German version EN 15549:2008
  • DIN EN ISO 15181-5:2008-09 Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 5: Calculation of the tolylfluanid and dichlofluanid release rate by determination of the concentration of dimethyltolylsulfamide (DMST) and dimethylphenyls...
  • DIN EN ISO 15181-5:2008 Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 5: Calculation of the tolylfluanid and dichlofluanid release rate by determination of the concentration of dimethyltolylsulfamide (DMST) and dimethylphenylsulf
  • DIN EN ISO 25139:2011-08 Stationary source emissions - Manual method for the determination of the methane concentration using gas chromatography (ISO 25139:2011); German version EN ISO 25139:2011
  • DIN CEN/TS 17638:2021 Stationary source emissions - Manual method for the determination of the mass concentration of formaldehyde - Reference method; German version CEN/TS 17638:2021
  • DIN 51437:2004 Testing of benzene and benzene homologues - Determination of the non-aromatics, toluene and C<(Index)8>-aromatics content of benzene - Gas chromatography
  • DIN EN 17844:2022 Construction products: Assessment of release of dangerous substances - Determination of the content of polycyclic aromatic hydrocarbons (PAH) and of benzene, toluene, ethylbenzene and xylenes (BTEX) - Gas chromatographic method with mass spectrometric det
  • DIN EN 17041:2018 Fertilizers - Determination of boron in concentrations 10 % using spectrometry with azomethine-H
  • DIN 51901:2006-11 Testing of carbonaceous materials - Determination of density by the xylene method - Solid materials
  • DIN 58932-3:2017-01 Haematology - Determination of the concentration of blood corpuscles in blood - Part 3: Reference method for the determination of the concentration of erythrozytes; Text in German and English
  • DIN EN 14625:2012-12 Ambient air - Standard method for the measurement of the concentration of ozone by ultraviolet photometry; German version EN 14625:2012 / Note: To be replaced by DIN EN 14625 (2022-11).
  • DIN EN 14625:2022-11 Ambient air - Standard method for the measurement of the concentration of ozone by ultraviolet photometry; German and English version prEN 14625:2022 / Note: Date of issue 2022-09-30*Intended as replacement for DIN EN 14625 (2012-12).
  • DIN 58932-5:2007-10 Haematology - Determination of the concentration of blood corpuscles in blood - Part 5: Reference method for the determination of the concentration of thrombocytes; Text in German and English
  • DIN 58932-3:2023-07 Haematology - Determination of the concentration of blood corpuscles in blood - Part 3: Reference method for the determination of the concentration of erythrocytes; Text in German and English / Note: Date of issue 2023-06-02*Intended as replacement for...
  • DIN 58932-5:2007 Haematology - Determination of the concentration of blood corpuscles in blood - Part 5: Reference method for the determination of the concentration of thrombocytes; Text in German and English
  • DIN EN 14662-3:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography; German version EN 14662-3:2005

Professional Standard - Coal, Detection method of toluene concentration

  • MT/T 836-1999 Method of determining the minimum explosion concentration for methane and coal dust mixtures

Group Standards of the People's Republic of China, Detection method of toluene concentration

  • T/CSTM 00209-2020 Non-destructive testing-The electromagnetic method for measuring magnetic particle suspension concentration
  • T/NAIA 092-2021 Determination of Formaldehyde Concentration in Indoor Air by Microplate Method
  • T/ZSA 96.4-2021 Test methods for dialyzer — Part 4:Performance parameters of solute reduction ratio
  • T/CHBAS 12-2021 Determination of N-Phenyl-bis(trifluoromethanesulfonimide)
  • T/NAIA 004-2020 Determination of Ammonia Nitrogen Concentration in Rumen Fluid Alkaline Sodium Hypochlorite-Phenol Spectrophotometry
  • T/SQIA 003-2022 Rapid detection of difenoconazole residues in vegetables and fruits — colloidal gold immunochromatography

ES-UNE, Detection method of toluene concentration

  • UNE-CEN/TS 17638:2021 Stationary source emissions - Manual method for the determination of the mass concentration of formaldehyde - Reference method (Endorsed by Asociación Española de Normalización in August of 2021.)
  • UNE-EN 17041:2019 Fertilizers - Determination of boron in concentrations = 10 % using spectrometry with azomethine-H
  • UNE-EN 50676:2019 Electrical equipment used for detection and concentration measurement of refrigerant gases - Performance requirements and test methods (Endorsed by Asociación Española de Normalización in February of 2020.)
  • UNE-EN 14662-3:2016 Ambient air - Standard method for the measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography

PL-PKN, Detection method of toluene concentration

  • PN Z04208-10-1992 Air purity protection Tests for phtalic acid esters Determination of butyl phtalate vapours in pennanent residence area air by gas chromatography with sample enrichment
  • PN Z04016-03-1989 Air purity protection -- Tests for benzene and its homologous compounds with saturated side chain -- Determination of benzene, toluene, ethylbenzene, (m+p)-xylene, izopropylbenzene and o-xylene in ambient air (immission) by gas chromatography with sample
  • PN-EN 17041-2018-07 P Fertilizers--Determination of boron in concentrations ≤ 10 % using spectrometry with azomethine-H
  • PN Z04208-02-1989 Air purity protection Tests for phtalic acid esters Determination of methyl phtalate in work places by gas ?hromatography
  • PN Z04194-02-1988 Air punty protection Tests for phthalic anhydride Determination of phthalic anhydride in work places by spectrophotometric method with hydroxylamine hydrochloride and ferric chloride
  • PN Z04022-10-1989 Air purity protection Tests for chlorobenzenes Determination of chlorobenzene and dichlorobenzenes in permanent residence area air by gas chromatography with sample enrichment
  • PN C45300-08-1989 Aromatic hydrocarbons Test methods Determination of impurities in toluene by gas chromatography and evaluation of toluene content
  • PN Z04016-02-1989 Air purity protectionTests for benzene and his homologous compounds with saturated side chain Determination of toluene and xylene in ambient air (immission) by colorimetric nitration method with Afjy-dimethylformamide
  • PN Z04193-02-1988 Air purity protection Tests for dimethylcarbamyl chloride Determination of dimethylcarbamyl chloride in work places by gaschromatography with sample enrichment
  • PN Z04208-04-1989 Air purity protection Tests for phtalic acid esters Determination of buthyl phtalate in work places by gas chromatography
  • PN Z04208-05-1989 Air purity protection Tests for phtalic acid esters Determination of diethylhexyl phtalate in work places by gas chromatography
  • PN Z04529-2021-07 P Air purity protection -- Determination of 2-tolylamine in workplaces by high performance liquid chromatography with spectrophotometric detection
  • PN Z04079-10-1990 Air purity protection ? Tests for cresols Determina?ion of cresols in pennanenl residence area air by gas chromatography with sample enrichment
  • PN Z04164-02-1986 Air purity protection ests for methyl bromide etermination of methyl bromide n work places by gas chromatography ith sample enrichment
  • PN Z04167-02-1986 Air purity protection ests for methoxyethyl alcohol etermination of 2-methoxyethyl lcohol in work places by gas hromatography with sample nrichment
  • PN Z04189-02-1988 Air purity protection ests tor aminodiphcnyl etermination ot 4-aminodiphcnyl t work places by gas hromalography' with sample nrichment

Shandong Provincial Standard of the People's Republic of China, Detection method of toluene concentration

  • DB37/T 339-2003 Method for Determination of Purity of Phthalic Anhydride - Differential Scanning Calorimetry (DSC)

AT-ON, Detection method of toluene concentration

  • ONR CEN/TS 17638-2021 Stationary source emissions - Manual method for the determination of the mass concentration of formaldehyde - Reference method (CEN/TS 17638:2021)
  • ONORM S 1815-2001 Testing of textiles - Quantitative analysis of binary mixtures - Polypropylene fibres with other fibres - Xylen (Xylol) method

Standard Association of Australia (SAA), Detection method of toluene concentration

  • AS 4215.1:1995 Methods of test for determining fire extinguishing and inerting concentrations for flammable liquids and gases - Determination of fire extinguishing concentrations
  • AS 4215.2:1995 Methods of test for determining fire extinguishing and inerting concentrations for flammable liquids and gases - Determination of fire inerting concentrations
  • AS 2891.7.3:2005 Methods of sampling and testing asphalt - Determination of maximum density of asphalt - Methylated spirits displacement
  • AS 4215.0:1995 Methods of test for determining fire extinguishing and inerting concentrations for flammable liquids and gases - General introduction and list of methods
  • AS/NZS 2341.8:2016 Methods of testing bitumen and related roadmaking products, Method 8: Determination of matter insoluble in toluene
  • AS/NZS 1462.27:2003 Methods of test for plastics pipes and fittings - Determination of toluene extract of carbon black
  • AS/NZS 1301.207s:2007 Methods of test for pulp and paper - Determination of stock concentration

Professional Standard - Environmental Protection, Detection method of toluene concentration

  • HJ 674-2013 Water quality.Determination of hydrazine and monomethyl hydrazine by p-Dimethylaminobenzaldehyde spectrophotometric method

Professional Standard - Hygiene , Detection method of toluene concentration

  • WS/T 65-1996 Urine.Determination of chlor dimeform and 4-chloro-0-toluidine.Spectrophotometric method
  • WS/T 163-1999 Workplace air.Determination of dinitrotoluene

BE-NBN, Detection method of toluene concentration

  • NBN T 04-247-1983 Tritolyl phosphate for industrial use - Determination of acidity to phenol red-Volumetric method
  • NBN T 04-277-1985 Phenol,cresols, cresylic acid and xylenols for industrial use - Determination of water - Dean and Stark method
  • NBN T 03-412-1983 Aluminium oxide primarily used for the production of aluminium - Determination of vanadium content - ff-Benzoyl-tf-phenylhydroxylamine photometric method

Canadian General Standards Board (CGSB), Detection method of toluene concentration

  • CGSB 1-GP-71 METH 4.7-1974 Methods of Testing Paints and Pigments Consistency Consistency of Putty by Means of Gardner Mobilometer

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Detection method of toluene concentration

  • GB/T 35772-2017 Rapid detection of phthalate esters in polyvinyl chloride products—Infra-red spectrometric method
  • GB/T 6730.31-2017 Iron ores—Determination of vanadium—N-benzoyl-N-phenylhydroxylamine extraction spectrophotometric method
  • GB/T 34796-2017 Quantification and purity analysis of nucleic acid concentration in solution—Ultraviolet spectrophotometry
  • GB/T 35173-2017 Characterisation and testing methods of recycled poly (ethylene terephthalate)(PET)
  • GB/T 35815-2018 Test methods of wooden activated carbon—Determination of toluene adsorption

Professional Standard - Geology, Detection method of toluene concentration

  • DZ/T 0064.67-1993 Groundwater quality testing method Determination of sulfide by p-aminodimethylaniline colorimetric method
  • DZ/T 0064.44-1993 Determination of boron by spectrophotometric method with H acid-formimine
  • DZ/T 0064.17-1993 Determination of Chromium by Spectrophotometry with Diphenylcarbazide

Association of German Mechanical Engineers, Detection method of toluene concentration

  • VDI 2454 Blatt 2-1982 Gaseous air pollution measurement; measurement of hydrogen sulphide concentration; methylene blue Impinger method
  • VDI 2451 Blatt 3-1996 Measurement of gaseous immissions - Measurement of sulphur dioxide concentration - Tetrachloromercurate Pararosaniline (TCM) Method
  • VDI 2459 Blatt 1-2000 Gaseous emission measurement - Determination of carbon monoxide concentration using flame ionisation detection after reduction to methane
  • VDI 3484 Blatt 1-2001 Gaseous ambient air measurements - Indoor-air pollution measurements - Test gases measurements; Measurement of the formaldehyde concentration with the sulfite pararosaniline method
  • VDI 3481 Blatt 4-2007 Gaseous emission measurement - Measurement of the concentrations of total organic carbon and methane carbon using the flame ionisation detector (FID)
  • VDI 3499 Blatt 1-2003 Emission measurement - Determination of polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) - Dilution method; Example of application of DIN EN 1948 for the concentration range < 0,1 ng I-TEQ/m3 and supplement to DIN EN 1948 for the concen

BELST, Detection method of toluene concentration

  • STB 17.13.05-31-2014 Environmental protection and nature use. Analytical control and monitoring. Water quality. Determination of the concentration of sulpfides and hydrogen sulpfide by photometric method with dimethyl-p-phenylendiamine

PT-IPQ, Detection method of toluene concentration

  • NP 3257-1988 Animal feeding stuffs Determination of ethopabate content Spectrophotometric method

Professional Standard-Safe Production, Detection method of toluene concentration

  • AQ/T 4268-2015 Method of rapid determination of dust concentration in the air of workplace.Light scattering method

Guangdong Provincial Standard of the People's Republic of China, Detection method of toluene concentration

IN-BIS, Detection method of toluene concentration

中华人民共和国国家卫生和计划生育委员会, Detection method of toluene concentration

  • GBZ/T 155-2002 Scintillation flask method for measuring radon concentration in the air

TR-TSE, Detection method of toluene concentration

  • TS 2361-1976 METHODS FOR THE MEASUREMENT OF AIR POLLUTION DETF.RMINATION OF CONCENTRATION OF SUSPENDED MATTER

Professional Standard - Petrochemical Industry, Detection method of toluene concentration

  • SH/T 1773-2012 1,2,4-Trimethylbenzene.Determination of purity and hydrocarbon impurities.Gas chromatographic method
  • SH/T 1766.2-2008 Petroleum m-xylene.Determination of purity and hydrocarbon impurities.Gas chromatographic method
  • SH/T 1489-1998 Petroleum p-xylene.Determination of purity and hydrocarbon impurities.Gas chromatographic method
  • SH/T 1612.8-2005 Purified terephthalic acid for industrial use - Determination of partical size distribution - Laser diffraction method
  • SH/T 1489-2018 Petroleum p-xylene.Determination of purity and hydrocarbon impurities.Gas chromatographic method
  • SH/T 1486.2-2008 Petroleum p-xylene.Determination of purity and hydrocarbon impurities.Gas chromatogrphy and external calibration
  • SH/T 1612.5-1995 Determination of titanium content in industrial purified terephthalic acid diantipyridine methane spectrophotometric method

ES-AENOR, Detection method of toluene concentration

Indonesia Standards, Detection method of toluene concentration

GOSTR, Detection method of toluene concentration

  • GOST 34310-2017 Biological medicine remedies for veterinary use. Methods for determination of mertiolyt, phenol, formaldehyde

Professional Standard - Urban Construction, Detection method of toluene concentration

  • CJ 26.13-1991 Municipal sewage water quality test method Determination of standard aniline Azo spectrophotometric method

海关总署, Detection method of toluene concentration

  • SN/T 2012-2019 Detection method of benzoic acid and sorbic acid in exported vinegar by liquid chromatography and liquid chromatography-mass spectrometry

BR-ABNT, Detection method of toluene concentration

Professional Standard - Aviation, Detection method of toluene concentration

  • HB 5422.12-1989 Copper alloy chemical analysis method crystal violet-toluene extraction absorptiometry for determination of antimony content

YU-JUS, Detection method of toluene concentration

  • JUS H.B8.636-1981 Sulphuric acid for industrial u se. Determination of oxides of nitrogen. 2,4-xyleno/ spectrophotometric method
  • JUS H.B8.606-1979 Aluminium oxide primarily used for the production of aluminium. Determination ofvanadium content. N-Benzoyl-N-phenylhydroxy lamine photometric method

NL-NEN, Detection method of toluene concentration

  • NEN 6346-1980 Test methods for vegetable and animal oils and fats - Determination of the p-anisidine value

RO-ASRO, Detection method of toluene concentration

  • SR 2567-3-1997 Soft drinks - Methods of analysis - Determination of sodium benzoate content

Professional Standard - Machinery, Detection method of toluene concentration

  • JB/T 6237.7-1992 Determination of Magnesium Content by Xylene Blue II Spectrophotometric Method for Chemical Analysis of Silver Powder Used in Electrical Contacts

CEN - European Committee for Standardization, Detection method of toluene concentration

  • EN 14625:2005 Ambient air quality - Standard method for the measurement of the concentration of ozone by ultraviolet photometry




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved