Compression Test Curve

Compression Test Curve, Total:394 items.

In the international standard classification, Compression Test Curve involves: Rubber, Refractories, Electronic tubes, Medical equipment, Equipment for the rubber and plastics industries, Electrical wires and cables, Extraction and processing of petroleum and natural gas, Adhesives, Construction materials, Reinforced plastics, Compressors and pneumatic machines, Earthworks. Excavations. Foundation construction. Underground works, Products of the textile industry, Mechanical testing, Chipless working equipment, Fasteners, Refrigerating technology, Iron and steel products, Testing of metals, Seals, glands, Rubber and plastics products, Textile fibres, Shop fittings, Products of the chemical industry, Freight distribution of goods, Sports equipment and facilities, Environmental testing, Electronic components in general, Fuels, Materials for aerospace construction, Powder metallurgy, Plastics, Surface treatment and coating, Soil quality. Pedology, Packaging and distribution of goods in general, Wood, sawlogs and sawn timber, Ceramics, Electromechanical components for electronic and telecommunications equipment, Valves, Non-ferrous metals, Road engineering, Insulation, Ventilators. Fans. Air-conditioners, Metalliferous minerals, Wood-based panels, Test conditions and procedures in general, Road vehicle systems, Cellular materials, Vocabularies, Electricity. Magnetism. Electrical and magnetic measurements, Raw materials for rubber and plastics, Road vehicles in general, Protection of and in buildings, Semiconducting materials, Protective equipment, Materials for the reinforcement of composites, Footwear, Bearings.

BE-NBN, Compression Test Curve

NBN 771-10-1969 Bending and compression testing
NBN X 07-001-1987 Classification and càlibration of material testing machines -Machines for compression, bending and tensile tests
NBN E 51-001-1988 Capacity compressor. Acceptance test
NBN T 41-011-1976 Plastics - Transversal bending test on rings by parallel-plate loading
NBN T 31-004-1976 Vulcanized rubbers - Determination of compression set under constant deflection at low temperatures
NBN B 15-220-1990 Concrete test. Determination of compression resistance
NBN T 31-003-1976 Vulcanized rubbers - Determination of compression set under constant deflection at normal and high temperatures
NBN H 03-323-1987 Package. Complete shipping package, compression tested

Military Standard of the People's Republic of China-General Armament Department, Compression Test Curve

GJB 772.112-1993 Explosives Test Method Compressive Stress-Strain Curve Determination
GJB 736.16-1994 Pyrotechnics Test Method Ignition Pressure-Time Curve Determination
GJB 5309.24-2004 Test methods for pyrotechnics Part 24: Determination of ignition pressure-time curve
GJB 736.16A-2019 Test methods for pyrotechnics Part 16: Determination of ignition pressure-time curve
GJB 8614-2015 Determination of linear shrinkage of molded vulcanized rubber
GJB 772.111-1993 Explosives Test Method Tensile Stress-Strain Curve Determination

National Aeronautics and Space Administration (NASA), Compression Test Curve

NASA NACA-TN-951-1945 Tests on thin-walled celluloid cylinders to determine the interaction curves under combined bending, torsion, and compression or tension loads

CZ-CSN, Compression Test Curve

CSN 02 9041-1981 Compressed asbestos flat jointing. Bend test
CSN 64 0614-1981 Testing of plnstios. Determination f modulus of elasticity from tensile, ompresion and flexural tests
CSN 10 5031-1972 Testing of piston compressora
CSN 10 5035-1980 Testing of turbo compressors
CSN 10 5032-1974 Testing of screw compressors
CSN 21 0380-1974 Forming machines. Testing methods for double-acting crank presses, toggle stamping presses and press brakes
CSN 62 1441-1955 Multiple compression rubber tests
CSN 58 8775 Z1-1998 Grease test methods. Fat curve measurement
CSN 58 8775-1994 Methods of test for fats and oils Determination of cooling curve
CSN 14 0613-1989 Testing of refrigerant positive displa- cement compressors
CSN 64 5441 Z1-1999 Light weight test, compression resistance test of honeycomb materials
CSN 66 8065-1971 Detemúnalion oí brisunce by lead block compression test
CSN 49 0167-1985 Test "f propertics of particle houni. (lompressihilily of bciard fo? lumiiiatiuii
CSN 34 7171-1965 Breakdown voltage test. Wires. Conductors for winding
CSN 07 8515 Z1-1997 Test pressure of compressed gas for seamless steel cylinders, 19 MPa
CSN 21 0388-1984 Forming machines. Single-action crank presses with operating force above 5000 kn. Testing methods
CSN 02 9040-1981 Compressed asbestos flat jointing. Dimensions and density test

AENOR, Compression Test Curve

UNE 53514:2015 Rubber vulcanized. Determination of temperature rise and resistance to fatigue in flexometer testing. Compression flexometer
UNE 83507:2004 Concrete with fibres. Testing in compression
UNE-ISO 5893:2012 Rubber and plastics test equipment. Tensile, flexural and compression types (constant rate of traverse). Specification.
UNE-EN 24506:2004 Hardmetals. Compression test. (ISO 4506:1979)
UNE-EN 13771-1:2017 Compressors and condensing units for refrigeration - Performance testing and test methods - Part 1: Refrigerant compressors
UNE-EN ISO 12048:2001 Packaging - Complete, filled transport packages - Compression and stacking tests using a compression tester. (ISO 12048:1994)
UNE-EN 12743:2000 FOOTWEAR - TEST METHODS FOR OUTSOLES - COMPRESSION ENERGY
UNE 28012-6:1954 WOODS USED IN AIRCRAFT. AXIAL COMPRESSION TEST.
UNE-EN 14594:2005 Respiratory protective devices - Continuous flow compressed air line breathing apparatus - Requirements, testing, marking

PT-IPQ, Compression Test Curve

E 255-1971 Concrete. Preparing beakers for compression and bend testing
E 264-1972 soil. cement. Compression test
NP 271-1962 Tuyaux en amlante-cdment. Eesal de compression diamétrale
NP 271-1988 Asbestos-cement pipes Crushing test
NP 142-1958 Asphalt. Marshall compression test

German Institute for Standardization, Compression Test Curve

DIN 53533-3:1988-07 Testing of elastomers; testing of heat generation and service life during the fatigue test (flexometer test); compression-flexometer
DIN 53533-3:1988 Testing of elastomers; testing of heat generation and service life during the fatigue test (flexometer test); compression-flexometer
DIN EN 13892-2:2003-02 Methods of test for screed materials - Part 2: Determination of flexural and compressive strength; German version EN 13892-2:2002
DIN EN ISO 4506:2018-07 Hardmetals - Compression test (ISO 4506:2018); German version EN ISO 4506:2018
DIN EN 12390-13:2021-09 Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression; German version EN 12390-13:2021
DIN 52185:1976-09 Testing of wood; compression test parallel to grain
DIN EN ISO 12048:2001-04 Packaging - Complete, filled transport packages - Compression and stacking tests using a compression tester (ISO 12048:1994); German version EN ISO 12048:2000
DIN 8976:2017-03 Performance testing of compression type refrigerating systems / Note: To be replaced by DIN ISO 916 (2022-12).
DIN 52192:1979-05 Testing of wood; compression test perpendicular to grain
DIN 50134:2008-10 Testing of metallic materials - Compression test of metallic cellular materials
DIN ISO 7801:2008-10 Metallic Materials - Wire - Reverse bend test (ISO 7801:1984)
DIN EN ISO 7500-1 Bb.1:1999 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines; verification and calibration of the force-measuring system; general for requirements, verification and calibration of tension, compressio

Society of Automotive Engineers (SAE), Compression Test Curve

SAE AS4265-2013 Impulse Testing of Hydraulic Tubing and Fittings, S-N Curve
SAE ARP1321-1993 FLEXURE TESTING OF BENT HYDRAULIC TUBING
SAE ARP1185-1973 FLEXURE TESTING OF HYDRAULIC TUBING JOINTS AND FITTINGS
SAE ARP1185A-2011 FLEXURE TESTING OF HYDRAULIC TUBING JOINTS AND FITTINGS
SAE AS4076-1987 Contractile Strain Ratio Testing of Titanium Hydraulic Tubing
SAE AS4076-2013 Contractile Strain Ratio Testing of Titanium Hydraulic Tubing
SAE J2468-1999 Road Vehicles Brake Lingings Compressibility Test Procedure
SAE J3079/1-2021 Validation of Compressibility Test Systems for Friction Materials
SAE J3079-1-2021 Validation of Compressibility Test Systems for Friction Materials
SAE J3112-2017 A/C Compressor Oil Separator Effectiveness Test Standard

IT-UNI, Compression Test Curve

UNI 3258-1952 Wood test. Tangential compression and radial compression tests
UNI 3261-1952 Wood test. Compression elastic coefficient measurement
UNI 4279-1972 Plastic material testing. Compression Characteristics Measurement
UNI 3748-1956 Wood fiber panel testing. Compressibility* Determination
UNI 3266-1952 Wood test. Determination of linear and volumetric shrinkage due to moisture loss

VN-TCVN, Compression Test Curve

TCVN 4032-1985 Cements.Test methods of bending and compression strengths

(U.S.) Ford Automotive Standards, Compression Test Curve

FORD FLTM EU-BO 052-01-2001 COMPRESSION LOAD DEFLECTION TEST FOR POLYURETHANE FOAM
FORD FLTM EU-BO 052-1-2001 COMPRESSION LOAD DEFLECTION TEST FOR POLYURETHANE FOAM

American Welding Society (AWS), Compression Test Curve

WRC 282:1982 Elastic-Plastic Buckling of Axially Compressed Ring Stiffened Cylinders - Test vs Theory

National Metrological Technical Specifications of the People's Republic of China, Compression Test Curve

JJF(纺织) 057-2006 Calibration Specifications for Crimp Shrinkage Testers
JJF(纺织) 057-2016 Calibration Specification for Tester of Filament Crimp Shrinkage
JJF(纺织)057-2016 Calibration Specification for Tester of Filament Crimp Shrinkage
JJF(机械) 1015-2018 Calibration specification for compressor cooling capacity test device
JJF(机械)1015-2018 Calibration specification for compressor cooling capacity test device
JJF(机械) 071-2009 Calibration specification for compressor cooling capacity test device

GM Daewoo, Compression Test Curve

GMKOREA EDS-T-7510-2006 TESTING OF PLASTICS DETERMINATION OF THE MODULUS OF ELASTICITY BY TENSILE, COMPRESSION AND FLEXURAL TEST (VERSION: 4)
GMKOREA EDS-T-7650-2011 Test Method for Determination of Compression Properties of Laminated Cushioning Materials
GMKOREA EDS-T-7657-2011 Test Method for Compressibility of Upholstery Trim Strips

HU-MSZT, Compression Test Curve

MNOSZ 700-2.lap-1955 Coal test curve editor
MSZ 397-1966 Refractory building materials testing line shrinks and grows after testing

RU-GOST R, Compression Test Curve

GOST 23775-1979 Carbon products. Methods of determination for compressive, bend, tensile, strengths (diametral compression)
GOST 15634.3-1970 Magnet wire. Method of the bending test
GOST R 57852-2017 Composites. Method for determination of test specimens bending under tensile and compressive forces application
GOST 26798.2-1996 I-G and I-H well cement. Test methods
GOST 26798.2-1985 Oil-well cements. Test methods of strength limits in bending and compression
GOST 28840-1990 Mashines tension, press and bending materials. General technical requirements
GOST 18211-1972 Transport tare. Compression test method
GOST 33359-2015 Residual fuel oils. Test for straight-run. Determination of distillation curve at pressure of 0,133 kPa (1 mm Hg)
GOST R 50837.1-1995 Residual fuel oils. Test for straight-run. Method for determination of the total shape of distillation curve at pressure of 0,133 kPa (1 mm Hg)
GOST 265-1977 Rubber. Methods of short static compression tests
GOST R 51360-1999 Refrigerating compressors. Safety requirements and methods of testing
GOST R 57491-2017 Footwear. Test methods for outsoles. Determination of compression energy
GOST ISO 8573-3-2006 Compressed air. Part 3. Test methods for measurement of humidity

Professional Standard - Electron, Compression Test Curve

SJ 448-1973 Methods of measurement for static characteristic of high-voltage rectifier tubes
SJ/Z 1171-1977 Methods for determination of polarization curve of electroplating solution

Japanese Industrial Standards Committee (JISC), Compression Test Curve

JIS T 0313:2022 Testing methods for compression bending properties of metallic osteosynthesis devices
JIS T 0313:2009 Testing methods for compression bending properties of metallic osteosynthesis devices
JIS B 8606:1998 Testing of refrigerant compressors
JIS B 8606:2021 Testing of refrigerant compressors
JIS K 6272:2003 Rubber -- Tensile, flexural and compression test equipment (constant rate of traverse) -- Specification
JIS A 1157:2010 Method of test for compressive creep of concrete
JIS R 1608:2003 Testing methods for compressive strength of fine ceramics
JIS B 7733:1997 Verification of the force measuring system of the compression testing machine
JIS K 7220:1995 Testing method for compressive properties of rigid cellular plastics

ZA-SANS, Compression Test Curve

SANS 5893:2003 Rubber and plastics test equipment - Tensile, flexural and compression types (constant rate of traverse) - Specification

SE-SIS, Compression Test Curve

SIS 20 03 01 Test Methods. compression
SIS SS-ISO 1217:1990 Displacement compressors — Acceptance tests
SIS SS 3136-1984 Metallic spiral-wound gaskets - Compression testing
SIS SMS 3116 E-1973 T?tningselement. Gummibunden asbest typ A f?r planpackningar. Provning
SIS SS 13 11 10-1984 Concrete testing — Hardened concrete - Compression testing machines
SIS SS 13 11 10-1980 Concrete testing — Hardened concrete — Compression testing machines
SIS SMS 3117 E-1973 T?tningselement. Cummibunden asbest typ B f?r planpackningar. Provning
SIS SMS 3113 E-1973 T?tningselement. Gummibunden asbest typ A f?r planpackningar
SIS SS 84 40 17-1986 Flexible intermediate bulk containers -Compression resistance test

Professional Standard - Petroleum, Compression Test Curve

SY/T 5346-2005 Rock capillary pressure measurement
SY/T 5346-1994 Determination of Rock Capillary Pressure Curve
SY/T 5815-1993 Test method for rock pore volume compressibility

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Compression Test Curve

GB/T 29171-2023 Determination of rock capillary pressure curve
GB/T 29171-2012 Rock capillary pressure measurement
GB/T 37782-2019(英文版) "Metallic materials—Indentation test—Determination of strength,hardness and stressstrain curve"
GB/T 42524-2023 Iron ore fines in bulk—Determination of transportable moisture limits—Compaction curve test procedure
GB/T 11387-2008 Test methods for the properties of piezoelectric ceramics.Test for the static flexural strength
GB/T 31295-2014 The core to wind turbine blade.Determination of dimensional stability at elevated temperatures with flexural load and with compressive load

American Society of Mechanical Engineers (ASME), Compression Test Curve

ASME STP-PT-028-2009 IMPACT TESTING EXEMPTION CURVES FOR LOW TEMPERATURE OPERATION OF PRESSURE PIPING
ASME PTC 10-1997(R2014) Performance Test Code on Compressors and Exhausters
ASME PTC 10-1997 Performance test code on compressors and exhausters

Association Francaise de Normalisation, Compression Test Curve

NF EN 13892-2:2003 Méthodes d'essai des matériaux pour chapes - Partie 2 : détermination de la résistance à la flexion et à la compression
NF ISO 4666-3:2023 Caoutchouc vulcanisé - Détermination de l'élévation de température et de la résistance à la fatigue dans les essais aux flexomètres - Partie 3 : flexomètre à compression (type à déformation constante)
NF T46-045-3*NF ISO 4666-3:2017 Rubber, vulcanized - Determination of temperature rise and resistance to fatigue in flexometer testing - Part 3 : compression flexometer (constant-strain type)
NF EN ISO 4506:2018 Métaux durs - Essai de compression
NF ISO 5893:2020 Appareils d'essai du caoutchouc et des plastiques - Types pour traction, flexion et compression (vitesse de translation constante) - Spécifications
NF T48-108:1994 Asbestos and rubber compressed sheets for seals. Determination of bending resistance.
NF P18-411:1981 Concretes. Common characteristics of hydraulic machines for compression, bending, and tension testing of hard materials.
NF ISO 1217:2009 Compresseurs volumétriques - Essais de réception
NF G07-314:1983 Textiles. Testing of yarns. Determination of the twisting of yarns.
NF EN ISO 12048:2001 Emballages - Emballages d'expédition complets et pleins - Essais de compression et de gerbage à l'aide d'une machine d'essai de compression
NF ISO 5893/A1:2020 Appareils d'essai du caoutchouc et des plastiques - Types pour traction, flexion et compression (vitesse de translation constante) - Spécifications - AMENDEMENT 1
NF E35-410-1*NF EN 13771-1:2016 Compressors and condensing units for refrigeration - Performance testing and test methods - Part 1 : refrigerant compressors
NF P18-430-13:2014 Testing hardened concrete - Part 13 : determination of secant modulus of elasticity in compression
NF P18-430-13*NF EN 12390-13:2021 Testing hardened concrete - Part 13 : determination of secant modulus of elasticity in compression
NF EN 12390-13:2021 Essais pour béton durci - Partie 13 : détermination du module sécant d'élasticité en compression
NF E51-271*NF ISO 18740:2016 Turbocompressors - Performance test code - Simplified acceptance test
NF EN 60763-2:2016 Spécification pour cartons comprimés et contrecollés - Partie 2 : méthodes d'essai
NF EN IEC 62677-2:2018 Profilés thermorétractables basse et moyenne tensions - Partie 2 : méthodes d'essai
NF C26-277-2*NF EN IEC 62677-2:2018 Heat shrinkable low and medium voltage moulded shapes - Part 2 : methods of test

British Standards Institution (BSI), Compression Test Curve

BS ISO 4666-3:2022 Rubber, vulcanized. Determination of temperature rise and resistance to fatigue in flexometer testing. Compression flexometer (constant-strain type)
BS EN 12808-3:2008 Grouts for tiles - Determination of flexural and compressive strength
BS ISO 4666-3:2016 Rubber, vulcanized. Determination of temperature rise and resistance to fatigue in flexometer testing. Compression flexometer (constant-strain type)
BS ISO 4666-3:2010 Rubber, vulcanized. Determination of temperature rise and resistance to fatigue in flexometer testing. Compression flexometer (constant-strain type)
BS ISO 1217:2009+A1:2016 Displacement compressors. Acceptance tests
BS ISO 5893:2019+A1:2020 Rubber and plastics test equipment. Tensile, flexural and compression types (constant rate of traverse). Specification
BS ISO 5389:2005 Turbocompressors. Performance test code
BS ISO 7183:2008 Compressed-air dryers. Specifications and testing
BS ISO 7183:2007 Compressed-air dryers. Specifications and testing
18/30356322 DC BS ISO 21914. Test methods for fibre-reinforced cementitious composites. Bending moment-curvature curve by four-point bending test
BS EN IEC 62677-2:2018 Heat shrinkable low and medium voltage moulded shapes. Methods of test
BS EN 12697-25:2016 Bituminous mixtures. Test methods. Cyclic compression test
BS ISO 5893:2002 Rubber and plastics test equipment - Tensile, flexural and compression types (constant rate of traverse) - Specification
19/30397531 DC BS EN 12390-13. Testing hardened concrete. Part 13. Determination of secant modulus of elasticity in compression
BS ISO 8573-3:1999 Compressed air - Test methods for measurement of humidity
20/30411276 DC BS ISO 5893 AMD1. Rubber and plastics test equipment. Tensile, flexural and compression types (constant rate of traverse). Specification
BS ISO 4666-4:2007 Rubber, vulcanized - Determination of temperature rise and resistance to fatigue in flexometer testing - Constant-stress flexometer
BS ISO 13314:2011 Mechanical testing of metals. Ductility testing. Compression test for porous and cellular metals
BS EN 302-8:2023 Adhesives for load-bearing timber structures. Test methods. Static load test of multiple bond line specimens in compression shear
BS EN ISO 22477-1:2018 Geotechnical investigation and testing. Testing of geotechnical structures - Testing of piles: static compression load testing
BS EN 12390-13:2013 Testing hardened concrete. Determination of secant modulus of elasticity in compressio
BS EN 12390-13:2021 Testing hardened concrete. Determination of secant modulus of elasticity in compression

RO-ASRO, Compression Test Curve

STAS 10537-1976 CARBON MATERIALS Determination of (he strength to compression, bending and traction
STAS 7259-1980 REFRIGERAT ION C.OMPRESSORS Testing methods
STAS 1913/13-1983 Foundation soil DFTFHMINATION OF COMPACTION CIIARACTHRISTICS Proctor test
STAS 5585-1971 TESTS OF CONCRETE Dctermination of the modulus of compressibilily of concrete
SR ISO 4385:1996 Plain bearings - Compression testing of metallic bearing materials

PL-PKN, Compression Test Curve

PN D04216-1965 Lignofol i lignos?on Oznaczanie wytrzyma?o?ci na zginanie statyczne
PN M43102-1966 Compressors ethods of ?es?
PN M55693-1970 Straight-sided crank presses Testing of accuracy
PN M43200-1989 Compressed air dryers pecyfications and testing
PN D04214-1964 Lignofol and lignos?one De?ermina?ion o) linear swelling
PN H04327-1974 Fa?ique testing of metals Tension-compression test with constant cycle load

American Society for Testing and Materials (ASTM), Compression Test Curve

ASTM D8510/D8510M-23 Standard Test Method for Local Buckling and Crippling under Axial Compressive Loading
ASTM D3883-04(2016) Standard Test Method for Yarn Crimp and Yarn Take-up in Woven Fabrics
ASTM D3883-04(2020) Standard Test Method for Yarn Crimp and Yarn Take-up in Woven Fabrics
ASTM D623-07 Standard Test Methods for Rubber Property8212;Heat Generation and Flexing Fatigue In Compression
ASTM C1699-09 Standard Test Method for Moisture Retention Curves of Porous Building Materials Using Pressure Plates
ASTM E561-21 Standard Test Method for KR Curve Determination
ASTM E561-20 Standard Test Method for KR Curve Determination
ASTM E561-19 Standard Test Method for KR Curve Determination
ASTM E561-19e1 Standard Test Method for KR Curve Determination
ASTM E561-22 Standard Test Method for KR Curve Determination
ASTM E561-08e1 Standard Test Method forK-R Curve Determination
ASTM E561-10e1 Standard Test Method for K-R Curve Determination
ASTM D3883-04(2012) Standard Test Method for Yarn Crimp and Yarn Take-up in Woven Fabrics
ASTM D5591-22 Standard Test Method for Thermal Shrinkage Force of Yarn and Cord With a Thermal Shrinkage Force Tester
ASTM D623-99e1 Standard Test Methods for Rubber Property-Heat Generation and Flexing Fatigue In Compression
ASTM D623-99 Standard Test Methods for Rubber Property-Heat Generation and Flexing Fatigue In Compression
ASTM D6112-97 Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes
ASTM D6112-18 Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes
ASTM C1699-09(2015) Standard Test Method for Moisture Retention Curves of Porous Building Materials Using Pressure Plates
ASTM F1832-97 Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM F1832-07(2017) Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM E561-05 Standard Test Method for K-R Curve Determination
ASTM E561-05e1 Standard Test Method forK-R Curve Determination
ASTM E561-15a Standard Test Method for KR Curve Determination
ASTM E561-10e2 Standard Test Method for K-R Curve Determination
ASTM D2990-95 Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics
ASTM D2990-01 Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics
ASTM D623-07(2019)e1 Standard Test Methods for Rubber Property—Heat Generation and Flexing Fatigue In Compression
ASTM D2990-17 Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics
ASTM D623-07(2014) Standard Test Methods for Rubber Propertymdash;Heat Generation and Flexing Fatigue In Compression
ASTM C16-03(2008) Standard Test Method for Load Testing Refractory Shapes at High Temperatures
ASTM C1699-09(2023) Standard Test Method for Moisture Retention Curves of Porous Building Materials Using Pressure Plates
ASTM C1699-08 Standard Test Method for Moisture Retention Curves of Porous Building Materials Using Pressure Plates
ASTM D4974-99 Standard Test Method for Thermal Shrinkage of Yarn and Cord Using a Thermal Shrinkage Oven
ASTM D1632-06 Standard Practice for Making and Curing Soil-Cement Compression and Flexure Test Specimens in the Laboratory
ASTM D1632-96 Standard Practice for Making and Curing Soil-Cement Compression and Flexure Test Specimens in the Laboratory
ASTM B478-85(1997)e1 Standard Test Method for Cross Curvature of Thermostat Metals
ASTM B478-85(2008) Standard Test Method for Cross Curvature of Thermostat Metals
ASTM E2218-14 Standard Test Method for Determining Forming Limit Curves
ASTM E2218-15 Standard Test Method for Determining Forming Limit Curves
ASTM E2218-02(2008) Standard Test Method for Determining Forming Limit Curves
ASTM E2218-14e1 Standard Test Method for Determining Forming Limit Curves
ASTM E561-10 Standard Test Method forK-R Curve Determination
ASTM D623-07(2019) Standard Test Methods for Rubber Property—Heat Generation and Flexing Fatigue In Compression
ASTM D6112-10 Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes
ASTM D6774-02(2010) Standard Test Method for Crimp and Shrinkage Properties for Textured Yarns Using a Dynamic Textured Yarn Tester
ASTM D6774-22 Standard Test Method for Crimp and Shrinkage Properties for Textured Yarns Using a Dynamic Textured Yarn Tester
ASTM D1632-17e1 Standard Practice for Making and Curing Soil-Cement Compression and Flexure Test Specimens in the Laboratory
ASTM D1632-17 Standard Practice for Making and Curing Soil-Cement Compression and Flexure Test Specimens in the Laboratory
ASTM D6112-23 Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes
ASTM D1632-07 Standard Practice for Making and Curing Soil-Cement Compression and Flexure Test Specimens in the Laboratory
ASTM D5591-04 Standard Test Method for Thermal Shrinkage Force of Yarn and Cord With a Thermal Shrinkage Force Tester
ASTM D4974-01 Standard Test Method for Thermal Shrinkage of Yarn and Cord Using a Thermal Shrinkage Oven
ASTM D4974/D4974M-22 Standard Test Method for Hot Air Thermal Shrinkage of Yarn and Cord Using a Thermal Shrinkage Oven
ASTM D4974-04(2016) Standard Test Method for Hot Air Thermal Shrinkage of Yarn and Cord Using a Thermal Shrinkage Oven
ASTM E2218-02 Standard Test Method for Determining Forming Limit Curves
ASTM D6068-96(2002)e1 Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM D6068-10 Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM D6641/D6641M-16 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture
ASTM D6641/D6641M-16e2 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture
ASTM D6641/D6641M-16e1 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture
ASTM D5591-98a Standard Test Method for Thermal Shrinkage Force of Yarn and Cord Using the Testrite Thermal Shrinkage Force Tester
ASTM D5591-02 Standard Test Method for Thermal Shrinkage Force of Yarn and Cord With a Thermal Shrinkage Force Tester
ASTM D5591-04(2016) Standard Test Method for Thermal Shrinkage Force of Yarn and Cord With a Thermal Shrinkage Force Tester
ASTM D5591-04(2011) Standard Test Method for Thermal Shrinkage Force of Yarn and Cord With a Thermal Shrinkage Force Tester
ASTM C1656-07 Standard Guide for Measuring the Reactivity of Hydraulic Refractory Castables using Exothermic Profile

UY-UNIT, Compression Test Curve

UNIT 127-1958 Compression test of bricks
UNIT 40-1948 Cylinder testing of compressed concrete

Korean Agency for Technology and Standards (KATS), Compression Test Curve

KS F 2329-2007(2017) Testing method for making curing of soil－cement compression and flexure test specimens in the laboratory
KS F 2329-1982 Testing method for making curing of soil－cement compression and flexure test specimens in the laboratory
KS F 2329-2007(2022) Testing method for making curing of soil－cement compression and flexure test specimens in the laboratory
KS B 6365-2018 Performance test method of refrigerant compressors
KS B 6365-2023 Performance test method of refrigerant compressors
KS B 6365-1987 Performance test method of refrigerant compressors
KS F 2442-1997 METHOD OF BIAXIAL COMPRESSIVE LOADING TEST OF CONCRETE
KS F 2442-1981 METHOD OF BIAXIAL COMPRESSIVE LOADING TEST OF CONCRETE
KS M 1424-2009 Testing method for compressive properties of media for water treatment
KS B 6350-2019 Testing methods for turbo compressors
KS B 6350-2005 Testing methods for turbo compressors
KS T ISO 12048:2020 Packaging — Complete, filled transport packages —Compression and stacking tests using a compression tester
KS B 6351-2001 Displace compressors-Test methods
KS B 6351-2014 Displace compressors — Test methods
KS K 0545-2003 Testing methods for crimp of yarn in fabrics : Dead load
KS M ISO 5893:2021 Rubber and plastics test equipment — Tensile, flexural and compression types(constant rate of traverse) — Specification
KS B ISO 7183-2002(2017) Compressed air dryers－Specifications and testing
KS B ISO 8573-3-2003(2008) Compressed air－Test methods for measurement of humidity
KS F 2158-1-2007 Method of compression test for nonstructural wood-based panels
KS K 0749-2021 Test method for compression behavior of prefabricated drain boards
KS M 3831-1997 TESTING METHOD FOR COMPRESSIVE PROPERTIES OF RIGID CELLULAR PLASTICS
KS M 3831-1987 TESTING METHOD FOR COMPRESSIVE PROPERTIES OF RIGID CELLULAR PLASTICS
KS D 8513-2003(2018) Compression Test Method for Fiber Reinforced Metals
KS B 6350-2008 Testing methods for turbo-blowers and compressors
KS B 6350-2014 Testing methods for turbo compressors
KS M 3709-2002 TESTING METHODS FOR COMPRESSIVE PROPERTIES OF CARBON FIBER REINFORCEDPLASTICS
KS F 2445-2016(2021) Standard method of testing piles under axial compressive load
KS F 2445-2016 Standard method of testing piles under axial compressive load
KS F 2445-1982 Standard method of testing piles under axial compressive load
KS A 4446-2006 Measuring devices for X－ray tube voltage

European Committee for Standardization (CEN), Compression Test Curve

EN 13892-2:2002 Methods of test for screed materials - Part 2: Determination of flexural and compressive strength

International Organization for Standardization (ISO), Compression Test Curve

ISO 4666-3:2022 Rubber, vulcanized — Determination of temperature rise and resistance to fatigue in flexometer testing — Part 3: Compression flexometer (constant-strain type)
ISO 917:1974 Testing of refrigerant compressors
ISO 1653:1975 Vulcanized rubbers; Determination of compression set under constant deflection at low temperatures
ISO/DIS 22484 Displacement and dynamic compressors — Performance test code for electric driven low-pressure air compressor packages
ISO 5893:2019 Rubber and plastics test equipment — Tensile, flexural and compression types (constant rate of traverse) — Specification
ISO 7183:2007 Compressed-air dryers - Specifications and testing
ISO 815:1972 Vulcanized rubbers; Determination of compression set under constant deflection at normal and high temperatures
ISO 5893:1985 Rubber and plastics test equipment — Tensile, flexural and compression types (constant rate of traverse) — Description

KR-KS, Compression Test Curve

KS B 3285-2003(2023) Coil spring compression. tensile tester
KS F 2329-2023 Method for preperation of soil cement compression and flexure test specimens in the laboratory
KS T ISO 12048-2020 Packaging — Complete, filled transport packages —Compression and stacking tests using a compression tester
KS M ISO 5893-2021 Rubber and plastics test equipment — Tensile, flexural and compression types(constant rate of traverse) — Specification

Professional Standard - Coal, Compression Test Curve

MT/T 581-1996 Test method of inner curve hydraulic motor for mining

AASHTO - American Association of State Highway and Transportation Officials, Compression Test Curve

T 272-2010 Standard Method of Test for Family of Curves—One Point Method
T 272-2015 Standard Method of Test for Family of Curves-One Point Method
T 272-2004 Standard Method of Test for Family of Curves - One-Point Method
T 341-2010 Standard Method of Test for Determination of Compression Capacity for Profile Wall Plastic Pipe by Stub Compression Loading

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Compression Test Curve

GJB 5891.3-2006 Test method of loading material for initiating explosive device Part 3: Measurement of loading pressure-density curve
GJB 5873-2006 Determination of the linear shrinkage rate of molded vulcanizate

Taiwan Provincial Standard of the People's Republic of China, Compression Test Curve

CNS 4252-1978 Spring Washers Curved or Crinkle Type

TR-TSE, Compression Test Curve

TS 206-1975 COMPRESSION TESTING OF METALLIC MATERIALS
TS 207-1965 COMPRESSION TESTING OF METALLIC MATERIALS
TS 2641-1977 Vulcanized Rubbers Determination of Compression Set Under Constant Deflection At Low Temperatures
TS 1096-1972 TEST FOR COMPRESSIVE PROPERTIES OF RIGID PLASTICS
TS 3114-1978 Determination Of Compressive Strength Of Concrete Test Specimens
TS 2351-1976 PLASTICS - THERMOSETTING MOULDING MATERIALS - DETERMINATION OF SHRINKAGE OF COMPRESSION MOULDED TEST SPECIMENS ?N THE FORM OF BARS

IN-BIS, Compression Test Curve

IS 13780-1993 Hardmetals. Compression test

ES-UNE, Compression Test Curve

UNE-EN ISO 4506:2018 Hardmetals - Compression test (ISO 4506:2018)
UNE-EN 12390-13:2022 Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression
UNE-EN 12743/AC:2001 Footwear - Test methods for outsoles - Compression energy.

ES-AENOR, Compression Test Curve

UNE 53 514 Rubber compression fatigue testing
UNE 83-304-1984 Concrete testing. Compression fracture

Indonesia Standards, Compression Test Curve

SNI 07-0410-1989 Compressed bending test method of metals
SNI 05-3055-1992 Refrigerant compressor testing
SNI 05-4079-1996 Test method for compressed asbestos gaskets
SNI 03-4143-1996 Test method for soil linear shrinkage
SNI ISO 3132:2010 Wood - Testing compression perpendicular to grain
SNI 04-0683-1989 Low voltage ceramic insulators, Body mass bending and impact strength
SNI 06-0320-1989 Compressed air, Specification and test method
SNI 08-2940-1992 Test method for yarns shrinkage in boiling water or hot air

未注明发布机构, Compression Test Curve

DIN EN ISO 7500-1 Beiblatt 1:1999 Testing of testing machines for static uniaxial loading Part 1: Tensile and compression testing machines Testing and calibration of the force measuring device General information on requirements and the testing and calibration of tensile, compression and
DIN EN 1015-11:1999 Test method for mortar for masonry DIN Part 11: Determination of bending tensile and compressive strength
DIN EN 13892-2 E:2000-07 Methods of test for screed materials - Part 2: Determination of flexural and compressive strength
DIN 53421:1971 Testing of rigid cellular plastics; compression test
DIN 8976 E:2016-10 Performance testing of compression type refrigerating systems
BS ISO 7183:2007(2008) Compressed - air dryers — Specifications and testing
DIN EN 12390-13 E:2012-04 Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression
DIN 51731 Testing of solid fuels - Compressed untreated wood - Requirements and testing

CU-NC, Compression Test Curve

NC 54-318-1985 Construction Materials and Products Raw Materials for Ceramics. Determinaron of Compressive and Flexural Strength
NC 90-08-09-1987 Metrological Assurance. Static Load Machines for Material Testing to Traction , Compression and Flexure. Methods and Means of Verification

AT-ON, Compression Test Curve

ONORM B 3124 Teil.9-1986 Testing of natural stone; mechanical properties of rock; modulus of elasticity, stress-strain curve and poisson's ratio under uniaxial compressive loading

Professional Standard - Textile, Compression Test Curve

FZ/T 50009.4-1998 Testing method for bulkiness property and compressive elasticity of three-dimensional crimp polyester staple fibres

WRC - Welding Research Council, Compression Test Curve

BULLETIN 282-1982 ELASTIC-PLASTIC BUCKLING OF AXIALLY COMPRESSED RING STIFFENED CYLINDER-TEST VS. THEORY

Professional Standard - Military and Civilian Products, Compression Test Curve

WJ 1866-1989 Measuring method of pressure-density curve for explosives

Standard Association of Australia （SAA）, Compression Test Curve

AS 3535:2004 Wool - Method for the measurement of resistance to compression
AS 1289.6.4.1:1998 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of compressive strength of a soil - Compressive strength of a specimen tested in undrained triaxial compression without measurement of pore water p
AS 1289.6.4.2:1998 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of compressive strength of a soil - Compressive strength of a saturated specimen tested in undrained triaxial compression with measurement of pore
AS 1012.9:1999 Methods of testing concrete - Determination of the compressive strength of concrete specimens
AS/NZS 4347.5:1995 Damp-proof courses and flashings - Methods of test - Determination of compression properties

BR-ABNT, Compression Test Curve

ABNT NBR 15826-2010 Refrigeration Compressors - Test Methods

VDI - Verein Deutscher Ingenieure, Compression Test Curve

VDI 2045 Blatt 1-1973 Abnahme- und Leistungsversuche an Verdichtern (VDI-Verdichterregeln); Versuchsdurchfuehrung und Garantievergleich

YU-JUS, Compression Test Curve

JUS N.C0.054-1990 Testing of insulated conductors and cables. Shrinking
JUS M.C3.329-1988 Plain bearings. Compression testing of metalic beariug materials
JUS B.F8.102-1990 Road vehicles. Brake linings. Compresslbility. Test procedure

能源部, Compression Test Curve

SY 5407-1991 Determination of capillary pressure curve semi-permeable partition method

国家市场监督管理总局、中国国家标准化管理委员会, Compression Test Curve

GB/T 37782-2019 Metallic materials—Indentation test—Determination of strength, hardness and stress-strain curve
GB/T 38719-2020 Metallic materials—Tube—Determination of biaxial stress-strain curve of tube by hydro-bulging test

GOSTR, Compression Test Curve

GOST 18211-2018 Transport packages. Compression test method
GOST 28547-1990 Refrigerating compressors of positive displacement type. Methods of testing
GOST R ISO 7183-2017 Compressed-air dryers. Specifications and test methods

Danish Standards Foundation, Compression Test Curve

DS/EN 60068-2-6:2008 Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
DS/ISO 1653:1979 Vulcanized rubber. Determination of compression set under constant deflection at low temperatures
DS/EN ISO 12048:2001 Packaging - Complete, filled transport packages - Compression and stacking tests using a compression tester
DS/EN 13771-1:2003 Compressors and condensing units for refrigeration - Performance testing and test methods - Part 1: Refrigerant compressors
DS/EN 14594:2005 Respiratory protective devices - Continuous flow compressed air line breathing apparatus - Requirements, testing, marking

The American Road & Transportation Builders Association, Compression Test Curve

AASHTO T 272-2010 Standard Method of Test for Family of Curves-One Point Method
AASHTO T 272-2015 Standard Method of Test for Family of Curves-One Point Method
AASHTO T 341-2010 Standard Method of Test for Determination of Compression Capacity for Profile Wall Plastic Pipe by Stub Compression Loading
AASHTO T 297-1994 Standard Method of Test for Consolidated, Undrained Triaxial Compression Test on Cohesive Soils

CL-INN, Compression Test Curve

INDITECNOR 35-9d-1961 Twisting force of ordinary spun yarns: test method
INDITECNOR 30-106ch-1957 Compressed wood panels: quality and testing methods

Lithuanian Standards Office , Compression Test Curve

LST EN 24506-2000 Hardmetals - Compression test (ISO 4506:1979)
LST EN 13771-1-2003 Compressors and condensing units for refrigeration - Performance testing and test methods - Part 1: Refrigerant compressors
LST EN ISO 12048:2001 Packaging - Complete, filled transport packages - Compression and stacking tests using a compression tester (ISO 12048:1994)
LST EN 60512-6-4-2003 Connectors for electronic equipment. Tests and measurements. Part 6-4: Dynamic stress tests. Test 6d: Vibration (sinusoidal) (IEC 60512-6-4:2002)
LST EN 14594-2005 Respiratory protective devices - Continuous flow compressed air line breathing apparatus - Requirements, testing, marking
LST EN 14594-2005/AC-2005 Respiratory protective devices - Continuous flow compressed air line breathing apparatus - Requirements, testing, marking

Professional Standard - Machinery, Compression Test Curve

JB/T 7704.6-1995 Test method for electroplating solution Determination of polarization curve
JB/T 9141.3-1999 Test method for compressive strength of flexible graphite sheets

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Compression Test Curve

ASHRAE AN-04-3-1-2004 Development and Testing of the Characteristic Curve Fan Model

United States Navy, Compression Test Curve

NAVY MS90486 REV B NOTICE 1-1999 GAGE, IN-SERVICE INSPECTION: FOR USE WITH MS90485 CRIMPING DIES. (FOR USE WITH COPPER UNINSULATED TERMINALS)
NAVY MS90486 REV B-1972 GAGE, IN-SERVICE INSPECTION: FOR USE WITH MS90485 CRIMPING DIES. (FOR USE WITH COPPER UNINSULATED TERMINALS)

Compressed Gas Association (U.S.), Compression Test Curve

CGA C-1-2006 METHODS FOR HYDROSTATIC TESTING OF COMPRESSED GAS CYLINDERS NINTH EDITION

Association of German Mechanical Engineers, Compression Test Curve

VDI 2045 Blatt 1-1993 Acceptance and performance tests on turbo compressors and displacement compressors; test procedure and comparison with guaranteed values
VDI 2045 Blatt 2-1993 Acceptance and performance tests on turbo compressors and displacement compressors; theory and examples

ESDU - Engineering Sciences Data Unit, Compression Test Curve

TM 148-2004 The implications of flow property profiles on determination and application of non-dimensional pressure loss coefficients for flow of incompressible fluids
ESDU 97024-2003 Derivation of endurance curves from fatigue test data@ including run-outs

American National Standards Institute （ANSI), Compression Test Curve

ANSI/ASME PTC10-1998 Performance Test Code - Compressors and Exhausters
ASTM C972-24 Standard Test Method for Compression-Recovery of Tape Sealant

Group Standards of the People's Republic of China, Compression Test Curve

T/CNESA 1203-2021 Performance test specification for compressed air energy storage systems
T/CERS 0013-2020 Performance test specification for compressed air energy storage systems
T/IAWBS 017-2022 Test method for full width at half maximum of double crystal X-rayrocking curve of diamond single crystal substrate
T/IAWBS 015-2021 Test method for full width at half maximum of double crystal X-ray rocking curve of Ga2O3 single crystal substrate
T/IAWBS 016-2022 X-ray double crystal rocking curve FWHM test method for silicon carbide single wafer

SAE - SAE International, Compression Test Curve

SAE J2468-2018 Road Vehicles Brake Lingings Compressibility Test Procedure
SAE J3112-2019 A/C Compressor Oil Separator Effectiveness Test Standard

CO-ICONTEC, Compression Test Curve

ICONTEC 1513-1979 Concrete, rapid test for compression resistance

Institute of Electrical and Electronics Engineers (IEEE), Compression Test Curve

IEEE 1459-2010 Definitions for the Measurement of Electric Power Quantities Under Sinusoidal, Nonsinusoidal, Balanced, or Unbalanced Conditions

US-FCR, Compression Test Curve

FCR COE RPMAS 66270-1977 PRESSURE TESTING OF GAS LINES