ZH
RU
ES

Grain and Phase Sizes

Grain and Phase Sizes, Total:215 items.

In the international standard classification, Grain and Phase Sizes involves: Iron and steel products, Particle size analysis. Sieving, Testing of metals, Coals, Powder metallurgy, Ferrous metals, Cutting tools, Non-ferrous metals, Products of non-ferrous metals, Materials for the reinforcement of composites, Surface treatment and coating, Analytical chemistry, Products of the chemical industry, Metalliferous minerals, Non-destructive testing, Ceramics, Elements of buildings, Paints and varnishes, Air quality, Construction materials, Fertilizers, Components for electrical equipment, Photography, Fuels, Animal feeding stuffs, Water quality, Chipless working equipment, Flexible drives and transmissions, Equipment for the rubber and plastics industries, Graphic technology.


RU-GOST R, Grain and Phase Sizes

  • GOST R ISO 14250-2013 Steel. Metallographic characterization of duplex grain size and distribution
  • GOST 25734-1996 Alumina. Method for crystallooptic determination of monograins sizes in non-metallurgic alumina

American Society for Testing and Materials (ASTM), Grain and Phase Sizes

  • ASTM E1181-87(1998)e1 Standard Test Methods for Characterizing Duplex Grain Sizes
  • ASTM E1181-02 Standard Test Methods for Characterizing Duplex Grain Sizes
  • ASTM E930-99(2015) Standard Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size)
  • ASTM E1181-02(2023) Standard Test Methods for Characterizing Duplex Grain Sizes
  • ASTM B390-92(2006) Standard Practice for Evaluating Apparent Grain Size and Distribution of Cemented Tungsten Carbides
  • ASTM B390-92(1996)e1 Standard Practice for Evaluating Apparent Grain Size and Distribution of Cemented Tungsten Carbides
  • ASTM B390-92(2000) Standard Practice for Evaluating Apparent Grain Size and Distribution of Cemented Tungsten Carbides
  • ASTM E2627-13(2019) Standard Practice for Determining Average Grain Size Using Electron Backscatter Diffraction (EBSD) in Fully Recrystallized Polycrystalline Materials
  • ASTM C1182-91(1995) Standard Test Method for Determining the Particle Size Distribution of Alumina by Centrifugal Photosedimentation
  • ASTM C1182-09(2019) Standard Test Method for Determining the Particle Size Distribution of Alumina by Centrifugal Photosedimentation
  • ASTM C1182-09(2014) Standard Test Method for Determining the Particle Size Distribution of Alumina by Centrifugal Photosedimentation
  • ASTM D7634-10(2017) Standard Test Method for Visualizing Particulate Sizes and Morphology of Particles Contained in Hydrogen Fuel by Microscopy
  • ASTM E389-03 Standard Test Method for Particle Size or Screen Analysis at No. 4 (4.75-mm) Sieve and Coarser for Metal-Bearing Ores and Related Materials
  • ASTM D7619-10 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
  • ASTM E276-98 Standard Test Method for Particle Size or Screen Analysis at No. 4 (4.75-mm) Sieve and Finer for Metal-Bearing Ores and Related Materials
  • ASTM D8489-23 Test Method for Determination of Microplastics Particle and Fiber Size, Distribution, Shape, and Concentration in Waters with High to Low Suspended Solids Using a Dynamic Image Particle Size and Shape
  • ASTM B761-06(2011) Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation
  • ASTM B761-17 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation
  • ASTM D8489-23e1 Standard Test Method for Determination of Microplastics Particle and Fiber Size, Distribution, Shape, and Concentration in Waters with High to Low Suspended Solids Using a Dynamic Image Particle Size
  • ASTM F328-98 Standard Practice for Calibration of an Airborne Particle Counter Using Monodisperse Spherical Particles

European Committee for Standardization (CEN), Grain and Phase Sizes

  • EN ISO 643:2020 Steels - Micrographic determination of the apparent grain size (ISO 643:2019, Corrected version 2020-03)
  • EN ISO 643:2012 Steels - Micrographic determination of the apparent grain size
  • EN 16090:2011 Copper and copper alloys - Estimation of average grain size by ultrasound
  • EN 10210-2:1997 Hot Finished Structural Hollow Sections of Non-Alloy and Fine Grain Structural Steels - Part 2: Tolerances, Dimensions and Sectional Properties
  • prEN 10210-2-1992 Hot finished structural hollow sections of non-alloy and fine grain structural steels; part 2: tolerances, dimensions and sectional properties
  • EN 17289-2:2020 Characterization of bulk materials - Determination of a size-weighted fine fraction and crystalline silica content - Part 2: Calculation method
  • EN ISO 4499-2:2020 Hardmetals - Metallographic determination of microstructure - Part 2: Measurement of WC grain size (ISO 4499-2:2020)
  • EN 10219-2:2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties
  • EN 10219-2:1997 Cold Formed Welded Structural Hollow Sections of Non-Alloy and Fine Grain Steels - Part 2: Tolerances, Dimensions and Sectional Properties
  • prEN 10219-2-1992 Cold formed structural hollow sections of non-alloy and fine grain structural steels; part 2: tolerances, dimensions and sectional properties
  • EN ISO 4499-2:2010 Hardmetals - Metallographic determination of microstructure - Part 2: Measurement of WC grain size (ISO 4499-2:2008)
  • EN 10210-2:2006 Hot finished structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties (Incorporating corrigendum February 2007)

SAE - SAE International, Grain and Phase Sizes

  • SAE AMS2316A-1991 METALLOGRAPHIC EVALUATION OF GRAIN SIZE IN WROUGHT NICKEL AND HEAT RESISTANT ALLOYS
  • SAE ARP598D-2016 Aerospace Microscopic Sizing and Counting of Particulate Contamination for Fluid Power Systems

Society of Automotive Engineers (SAE), Grain and Phase Sizes

  • SAE AMS2316-1989 METALLOGRAPHIC EVALUATION OF GRAIN SIZE IN WROUGHT NICKEL AND HEAT RESISTANT ALLOYS
  • SAE J444-2023 Cast Shot and Grit Size Specifications for Cleaning and Peening

HU-MSZT, Grain and Phase Sizes

Professional Standard - Ferrous Metallurgy, Grain and Phase Sizes

  • YB/T 4290-2012 Determination method of the largest grain size grade (ALA grain size) on the metallographic inspection surface

IN-BIS, Grain and Phase Sizes

Danish Standards Foundation, Grain and Phase Sizes

  • DS/EN ISO 2624:1995 Copper and copper alloys - Estimation of average grain size
  • DS/EN ISO 643:2013 Steels - Micrographic determination of the apparent grain size
  • DS/EN ISO 4499-2:2010 Hardmetals - Metallographic determination of microstructure - Part 2: Measurement of WC grain size
  • DS/EN 16090:2012 Copper and copper alloys - Estimation of average grain size by ultrasound
  • DS/EN 623-3:2001 Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 3: Determination of grain size and size distribution (characterized by the Linear Intercept Method)
  • DS/EN 10210-2+AC:2009 Hot finished structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties
  • DS/EN 10219-2:2009 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties
  • DS/EN 17289-1:2021 Characterization of bulk materials – Determination of a size-weighted fine fraction and crystalline silica content – Part 1: General information and choice of test methods

AENOR, Grain and Phase Sizes

  • UNE 37230:1986 LEAD AND LEAD ALLOYS- ESTIMATION OF THE AVERAGE GRAIN SIZE.
  • UNE-EN 16090:2012 Copper and copper alloys - Estimation of average grain size by ultrasound
  • UNE-EN ISO 643:2013 Steels - Micrographic determination of the apparent grain size (ISO 643:2012)
  • UNE-EN ISO 4499-2:2011 Hardmetals - Metallographic determination of microstructure - Part 2: Measurement of WC grain size (ISO 4499-2:2008)
  • UNE-EN 10210-2:2007 Hot finished structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties
  • UNE-EN 10219-2:2007 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties
  • UNE 20582-1:1978 DIMENSIONS OF FERROMAGNETIC OXIDES CORES AND ASSOCIATED PARTS. POT-CORES
  • UNE 7295:1976 DETERMINATION OF CONTENT, MAXIMUM SIZE AND THICK AGGREGATE GRANULOMETRIC MODULUS IN FRESH CONCRETE.

Korean Agency for Technology and Standards (KATS), Grain and Phase Sizes

ES-UNE, Grain and Phase Sizes

  • UNE 37230:1987 ERRATUM LEAD AND LEAD ALLOYS- ESTIMATION OF THE AVERAGE GRAIN SIZE.
  • UNE-EN ISO 4499-2:2021 Hardmetals - Metallographic determination of microstructure - Part 2: Measurement of WC grain size (ISO 4499-2:2020)
  • UNE-EN 16090:2020 Copper and copper alloys - Estimation of average grain size by ultrasound
  • UNE-EN ISO 643:2020 Steels - Micrographic determination of the apparent grain size (ISO 643:2019, Corrected version 2020-03)
  • UNE-EN ISO 13383-1:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Microstructural characterization - Part 1: Determination of grain size and size distribution (ISO 13383-1:2012) (Endorsed by AENOR in June of 2016.)
  • UNE 146406:2018 Determination of content, maximum size and thick aggregate granulometric modulus in fresh concrete.

British Standards Institution (BSI), Grain and Phase Sizes

  • BS EN ISO 4499-2:2020 Hardmetals. Metallographic determination of microstructure - Measurement of WC grain size
  • BS EN ISO 643:2020 Steels. Micrographic determination of the apparent grain size
  • BS EN ISO 4499-2:2010 Hardmetals. Metallographic determination of microstructure. Measurement of WC grain size
  • BS EN 16090:2011 Copper and copper alloys. Estimation of average grain size by ultrasound
  • 17/30363662 DC BS EN ISO 643 Steels. Micrographic determination of the apparent grain size
  • 18/30369648 DC BS EN ISO 4499-2. Hardmetals. Metallographic determination of microstructure. Part 2. Measurement of WC grain size
  • BS EN ISO 13383-1:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Microstructural characterization. Determination of grain size and size distribution
  • BS ISO 13067:2020 Microbeam analysis. Electron backscatter diffraction. Measurement of average grain size
  • 19/30385570 DC BS EN 16090. Copper and copper alloys. Estimation of average grain size by ultrasound
  • 19/30365236 DC BS ISO 13067. Microbeam analysis. Electron backscatter diffraction. Measurement of average grain size
  • BS EN 933-2:1996 Tests for geometrical properties of aggregates - Determination of particle size distribution - Test sieves, nominal size of apertures
  • BS EN 15238:2006 Soil improvers and growing media — Determination of quantity for materials with particle size greater than 60 mm
  • BS EN 15238:2007 Soil improvers and growing media. Determination of quantity for materials with particle size greater than 60 mm
  • BS EN 61247:1997 PM-cores made of magnetic oxides and associated parts - Dimensions
  • BS DD CEN/TS 15149-2:2006 Solid biofuels - Methods for the determination of particle size distribution - Vibrating screen method using sieve apertures of 3,15 mm and below
  • BS EN 12012-1:2000 Rubber and plastics machines - Size reduction machines - Safety requirements for blade granulators

Indonesia Standards, Grain and Phase Sizes

  • SNI 13-4702-1998 Determination of grain size of coal by sieving equipment
  • SNI 4137-2012 Test method for determination of the smallest average size (UKR) and the largest average size (UBR) aggregate grains

International Organization for Standardization (ISO), Grain and Phase Sizes

  • ISO/DIS 643:2023 Steels — Micrographic determination of the apparent grain size
  • ISO 4499-2:2020 Hardmetals — Metallographic determination of microstructure — Part 2: Measurement of WC grain size
  • ISO 13067:2020 Microbeam analysis — Electron backscatter diffraction — Measurement of average grain size
  • ISO 13383-1:2012 Fine ceramics (advanced ceramics, advanced technical ceramics) - Microstructural characterization - Part 1: Determination of grain size and size distribution
  • ISO 12633-2:2011 Hot-finished structural hollow sections of non-alloy and fine grain steels - Part 2: Dimensions and sectional properties
  • ISO 4499-2:2008 Hardmetals - Metallographic determination of microstructure - Part 2: Measurement of WC grain size
  • ISO 10799-2:2011 Cold-formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Dimensions and sectional properties
  • ISO 1754:1973 Title missing - Legacy paper document
  • ISO 1754:1974 Photography — Cameras using films 35 mm and smaller — Picture sizes
  • ISO 18903:2002 Imaging materials - Films and paper - Determination of dimensional change
  • ISO 1754:1998 Photography - Cameras using 35 mm film and roll film - Picture sizes
  • ISO/TR 10391:1992 Forage harvesters; method of determining by screening and expressing particle size of chopped forage materials
  • ISO 11313:1994 Photography - Disposable cassettes containing photocomposition film and paper - Dimensions and related requirements

German Institute for Standardization, Grain and Phase Sizes

  • DIN EN ISO 643:2020-06 Steels - Micrographic determination of the apparent grain size (ISO 643:2019, Corrected version 2020-03); German version EN ISO 643:2020
  • DIN EN ISO 2624:1995-08 Copper and copper alloys - Estimation of average grain size (ISO 2624:1990); German version EN ISO 2624:1995
  • DIN EN ISO 4499-2:2020-11 Hardmetals - Metallographic determination of microstructure - Part 2: Measurement of WC grain size (ISO 4499-2:2020); German version EN ISO 4499-2:2020
  • DIN EN ISO 643:2023-08 Steels - Micrographic determination of the apparent grain size (ISO/DIS 643:2023); German and English version prEN ISO 643:2023 / Note: Date of issue 2023-07-07*Intended as replacement for DIN EN ISO 643 (2020-06).
  • DIN EN 16090:2020-02 Copper and copper alloys - Estimation of average grain size by ultrasound; German version EN 16090:2019
  • DIN EN 15181/A1:2020-02 Copper and copper alloys - Estimation of average grain size by ultrasound; German version EN 16090:2019
  • DIN EN 16247-4:2020-02 Copper and copper alloys - Estimation of average grain size by ultrasound; German version EN 16090:2019
  • DIN EN ISO 643:2017 Steel - Micrographic determination of the apparent grain size (ISO/DIS 643:2017); German and English version prEN ISO 643:2017
  • DIN EN ISO 4499-2:2018 Hardmetals - Metallographic determination of microstructure - Part 2: Measurement of WC grain size (ISO/DIS 4499-2:2018); German and English version prEN ISO 4499-2:2018
  • DIN ISO 13067:2021 Microbeam analysis - Electron backscatter diffraction - Measurement of average grain size (ISO 13067:2020)
  • DIN EN 16090:2012 Copper and copper alloys - Estimation of average grain size by ultrasound; German version EN 16090:2011
  • DIN EN ISO 13383-1:2016-11 Fine ceramics (advanced ceramics, advanced technical ceramics) - Microstructural characterization - Part 1: Determination of grain size and size distribution (ISO 13383-1:2012); German version EN ISO 13383-1:2016
  • DIN 51455:2020 Liquid petroleum products - Determination of particle number and particle size in oils
  • DIN 51455:2020-12 Liquid petroleum products - Determination of particle number and particle size in oils
  • DIN EN 10210-2:2006 Hot finished structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties; English version of DIN EN 10210-2:2006-07
  • DIN EN 10210-2:1997 Hot finished structural hollow sections of non-alloy and fine grain structural steels - Part 2: Tolerances, dimensions and sectional properties; German version EN 10210-2:1997
  • DIN 18101:1985 Doors; doors for residential buildings; sizes of door leaves, position of hinges and lock, interdependence of dimensions
  • DIN EN 10219-2:2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties; English version of DIN EN 10219-2:2006-07
  • DIN 18101:2014 Pedestrian Doors - Doors for buildings - Sizes of door leaves, position of hinges and lock - Interdependence of dimensions
  • DIN 18101:2014-08 Pedestrian Doors - Doors for buildings - Sizes of door leaves, position of hinges and lock - Interdependence of dimensions
  • DIN EN ISO 13383-1:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Microstructural characterization - Part 1: Determination of grain size and size distribution (ISO 13383-1:2012); German version EN ISO 13383-1:2016
  • DIN EN 15238:2007 Soil improvers and growing media - Determination of quantity for materials with particle size greater than 60 mm; English version of DIN EN 15238:2007-02
  • DIN EN 10219-2 Berichtigung 1:2007 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties; German version EN 10219-2:2006, Corrigenda to DIN EN 10219-2:2006-07

RO-ASRO, Grain and Phase Sizes

  • STAS SR ISO 2624:1990 Copper and copper alloys. Estimation of average grain size
  • STAS 9162-1973 NON-METAL BEARING MINING PRODUCTS WITH CARBONATE CONTENT Determination of grain size

Association Francaise de Normalisation, Grain and Phase Sizes

  • NF A04-102*NF EN ISO 643:2020 Steels - Micrographic determination of the apparent grain size
  • NF E75-101:2001 Coated abrasives - Grain size analysis - Part 2 : determination of grain size distribution of macrogrits P12 to P220.
  • NF A95-186-2*NF EN ISO 4499-2:2020 Hardmetals - Metallographic determination of microstructure - Part 2 : measurement of WC grain size
  • NF EN ISO 4499-2:2020 Métaux-durs - Détermination métallographique de la microstructure - Partie 2 : mesurage de la taille des grains de WC
  • NF A51-130*NF EN 16090:2019 Copper and copper alloys - Estimation of average grain size by ultrasound
  • NF EN 16090:2019 Cuivre et alliages de cuivre - Estimation de la taille moyenne de grain par ultrasons
  • NF EN ISO 13383-1:2016 Céramiques techniques - Caractérisation microstructurale - Partie 1 : Détermination de la taille et de la distribution des grains
  • NF B41-204-1*NF EN ISO 13383-1:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Microstructural characterization - Part 1 : Determination of grain size and size distribution
  • NF A49-540-2:2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2 : tolerances, dimensions and sectional properties.
  • NF A49-540-2:1997 Cold form welded structural hollow sections of non-alloy and fine grain steels. Part 2 : tolerances, dimensions and sectional properties.
  • NF P01-012:1988 Dimensions des garde-corps - Règles de sécurité relatives aux dimensions des garde-corps et rampes d'escalier
  • NF A95-186-2:2010 Hardmetals - Metallographic determination of microstructure - Part 2 : measurement of WC grain size.
  • NF A49-502-2:2006 Hot finished structural hollow sections of non-alloy and fine grain steels - Part 2 : tolerances, dimensions and sectional properties.
  • NF A49-502-2:1997 Hot finished structural hollow sections of non-alloy and fine grain structural steels. Part 2 : tolerances, dimensions and sectional properties.
  • NF U44-313*NF EN 15238:2007 Soil improvers and growing media - Determination of quantity for materials with particle size greater than 60 mm.
  • NF C52-152/AM1:1970 Transformers. Dimensions of travelling wheels and associated locking devices.

Lithuanian Standards Office , Grain and Phase Sizes

  • LST EN ISO 2624:2000 Copper and copper alloys - Estimation of average grain size (ISO 2624:1990)
  • LST EN 16090-2012 Copper and copper alloys - Estimation of average grain size by ultrasound
  • LST EN ISO 643:2013 Steels - Micrographic determination of the apparent grain size (ISO 643:2012)
  • LST EN ISO 4499-2:2010 Hardmetals - Metallographic determination of microstructure - Part 2: Measurement of WC grain size (ISO 4499-2:2008)
  • LST EN 623-3-2002 Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 3: Determination of grain size and size distribution (characterized by the Linear Intercept Method)
  • LST EN 10210-2-2006 Hot finished structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties
  • LST EN 10210-2-2006/AC-2007 Hot finished structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties
  • LST EN 10219-2-2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties
  • LST EN 17289-2-2021 Characterization of bulk materials - Determination of a size-weighted fine fraction and crystalline silica content - Part 2: Calculation method

CZ-CSN, Grain and Phase Sizes

  • CSN 42 0462-1983 Metal testing. Methods for estimating the average grain size of steel and non-ferrous metals
  • CSN 42 0464-1962 Methods for estimating the average grain size of non — ferrous metals
  • CSN 42 0463-1984 Steel. Method for estimating the grain size of austenite on fractures
  • CSN 65 4812-1969 Determination of size and mechanical strength of granules in fertilizers
  • CSN 72 1565 Cast.3-1985 Testing of brick clays. Determination of the grain size by screen analysis. Orientation mineralogical and petrographical description of the plus mesh
  • CSN 66 6910-1988 Backing páper for roli film. Dimensions and specification
  • CSN 46 7092-40-1998 Testing methods for feeding stuffs - Part 40: Size determination of granules and briquettes

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Grain and Phase Sizes

  • GB/T 3488.2-2018 Hardmetals.Metallographic determination of microstructure.Part 2:Measurement of WC grain size
  • GB/T 31568-2015 Standard test method for determination of crystallite size of ZrO<下标2> coatings by Scherrer equation
  • GB/T 38532-2020 Microbeam analysis—Electron backscatter diffraction—Measurement of average grain size
  • GB/T 23413-2009 Determination of crystallite size and micro-strain of nano-materials.X-ray diffraction line broadening method
  • GB/T 42732-2023 Size Distribution and Concentration Measurement of Inorganic Nanoparticles in Aqueous Phases in Nanotechnology by Single Particle Inductively Coupled Plasma Mass Spectrometry
  • GB/T 30316-2013 Imaging materials.Film and paper.Determination of dimensional change

GM North America, Grain and Phase Sizes

  • GM GM9613P-1994 Zinc Phosphate Crystal Size Determination Using "Faxfilm" Replication

CEN - European Committee for Standardization, Grain and Phase Sizes

  • PREN 16090-2019 Copper and copper alloys - Estimation of average grain size by ultrasound
  • DD ENV 623-3-1993 Advanced Technical Ceramics - Monolithic Ceramics - General and Textural Properties - Part 3: Determination of Grain Size
  • EN 623-3:2001 Advanced Technical Ceramics - Monolithic Ceramics - General and Textural Properties - Part 3: Determination of Grain Size and Size Distribution (Characterized by the Liner Intercept Method)
  • PREN 17289-2-2019 Characterization of bulk materials - Determination of a sizeweighted fine fraction and crystalline silica content - Part 2: Calculation method

未注明发布机构, Grain and Phase Sizes

  • DIN EN ISO 643 Berichtigung 1:2004 Steel — Microphotographic determination of apparent grain size (ISO 643:2003); German version EN ISO 643:2003
  • DIN EN 10219-2:1997 Cold formed welded structural hollow sections of non-alloy and fine grain steels — Part 2: Tolerances, dimensions and sectional properties
  • BS EN 15428:2007(2009) Soil improvers and growing media — Determination of particle size distribution

Japanese Industrial Standards Committee (JISC), Grain and Phase Sizes

  • JIS G 0551 AMD 1:2022 Steels -- Micrographic determination of the apparent grain size (Amendment 1)
  • JIS R 7651:2007 Measurement of lattice parameters and crystallite sizes of carbon materials
  • JIS B 4141:1998 Diamond/CBN products -- Diamond or CBN grinding wheels and saws -- Dimensional characteristics and code for the forms
  • JIS B 6702:1992 Dimensions relating to molds for plastics compression molding machines and plastics transfer molding machines

AT-ON, Grain and Phase Sizes

  • OENORM EN ISO 4499-2:2020 Hardmetals - Metallographic determination of microstructure - Part 2: Measurement of WC grain size (ISO 4499-2:2020)
  • OENORM EN 17289-2-2021 Characterization of bulk materials - Determination of a size-weighted fine fraction and crystalline silica content - Part 2: Calculation method

IT-UNI, Grain and Phase Sizes

PL-PKN, Grain and Phase Sizes

  • PN O79020-1969 Dimensions system of packaging, transport and storage Basic interdependence dimensions
  • PN-EN 17289-3-2021-05 E Characterization of bulk materials -- Determination of a size-weighted fine fraction and crystalline silica content -- Part 3: Sedimentation method
  • PN-EN 17289-1-2021-05 E Characterization of bulk materials -- Determination of a size-weighted fine fraction and crystalline silica content -- Part 1: General information and choice of test methods

CH-SNV, Grain and Phase Sizes

  • SN EN 17289-2-2021 Characterization of bulk materials - Determination of a size-weighted fine fraction and crystalline silica content - Part 2: Calculation method

CU-NC, Grain and Phase Sizes

  • NC 43-12-1968 Particle boards and fibre boards Method of determination of water absorption and swelling in thickness after total inmersion in water

American National Standards Institute （ANSI), Grain and Phase Sizes

  • ANSI B74.16-2002 Checking the Size of Diamond and Cubic Boron Nitride Abrasive Grain

YU-JUS, Grain and Phase Sizes

  • JUS U.J6.009-1982 Scales and sizes ofgraphsfor plotting acoustic quantities against frequency

BE-NBN, Grain and Phase Sizes

NO-SN, Grain and Phase Sizes

  • NS-EN 10056-2-1994 Structural steel equal and unequal leg angles. Part 2: Tolerances on shape and dimensions

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Grain and Phase Sizes

  • IEEE 24-1977 Electrical@ Dimensional@ and Related Requirements for Outdoor Apparatus Bushings

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Grain and Phase Sizes

  • ASHRAE OR-16-C025-2016 Characterizing the In-Situ Size-Resolved Removal Efficiency of Residential HVAC Filters for Fine and Ultrafine Particles

American Society of Mechanical Engineers (ASME), Grain and Phase Sizes

KR-KS, Grain and Phase Sizes

  • KS M ISO 5655-2002 DIMENSIONS FOR PHOTOGRAPHIC FILM IN SHEETS AND ROLLS FOR MEDICAL, INDUSTRIAL AND DENTAL RADIOGRAPHY
  • KS B ISO 22-2018(2023) Belt — Flat transmission belts and corresponding pulleys — Dimensions and tolerances

Standard Association of Australia （SAA）, Grain and Phase Sizes

  • AS/NZS 4518.2:1997 Bonded abrasives - Determination and designation of grain size distribution - Microgrits F230 to F1200
  • AS/NZS 4518.1:1997 Bonded abrasives - Determination and designation of grain size distribution - Macrogrits F4 to F220

  Grain and Phase Sizes.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved