ZH
RU
ES

carbon material trace

carbon material trace, Total:498 items.

In the international standard classification, carbon material trace involves: Semiconductor devices, Testing of metals, Plastics, Products of the chemical industry, Materials for the reinforcement of composites, Standardization. General rules, Analytical chemistry, Mechanical testing, Cellular materials, Refractories, Aerospace engines and propulsion systems, Inorganic chemicals, Vocabularies, Conducting materials, Ferroalloys, Products of the textile industry, Materials for aerospace construction, Insulating materials, Electrical and electronic testing, Semiconducting materials, Ceramics, Organic chemicals, Non-ferrous metals, Paint ingredients, Fertilizers, Ferrous metals, Raw materials for rubber and plastics, Insulating fluids, Electrical accessories, Environmental protection, Wind turbine systems and other alternative sources of energy, Reinforced plastics, Fuels, Protection of and in buildings, Water quality, Aerospace fluid systems and components, Farming and forestry, Physics. Chemistry, Protection against fire, Welding, brazing and soldering, Horology, Construction materials, Radiation measurements, Nuclear energy engineering, Materials and articles in contact with foodstuffs, Powder metallurgy, Applications of information technology, Coatings and related processes used in aerospace industry, Photography, Wastes, Components for aerospace construction, Rubber and plastics products, Electrical wires and cables, Products of non-ferrous metals, Electronic tubes, Paints and varnishes, Petroleum products in general.

Group Standards of the People's Republic of China, carbon material trace

T/CASAS 009-2019 Determination of Trace Impurities Concentration and Distribution in Semi-insulating SiC Materials by Secondary Ion Mass Spectrometry
T/CNIA 0143-2022 Ultrapure Resin Vessels for Trace Impurity Analysis of Semiconductor Materials
T/ACEF 060-2023 Accounting Guidelines for Carbon Emission Reduction of Plastic Packaging Alternative Materials
T/NAIA 0173-2022 Hard Carbon Anode Material
T/YNIA 019-2023 Bio-based carbon test of nonwovens
T/CSTE 0007-2020 Determination of Trace Carbon Monoxide in Hydrogen Fuel - The Method of Mid-infrared Laser Spectroscopy for PEMFC
T/CASAS 010-2019 Determination of Trace Impurities Concentration and Distribution in GaN Materials by Secondary Ion Mass Spectrometry
T/SZZX 005-2019 Carbon fiber composites watch cases
T/CCPA 42-2023 Low-carbon sulfur-aluminum-ferric cementitious materials
T/NAIA 0172-2022 Lithium-ion battery silicon carbon anode material
T/CRRA 9901-2020 Coding rules for waste carbon fiber composites

German Institute for Standardization, carbon material trace

DIN 51917:2002-12 Testing of carbonaceous materials - Rockwell hardness test - Ball indentation method; Solid materials
DIN ISO 8658:2003 Testing of carbonaceous materials - Green and calcined coke - Determination of trace elements by flame atomic absorption spectroscopy (ISO 8658:1997)
DIN 51947:1998 Carbonaceous materials - Terms
DIN 51947:1998-04 Carbonaceous materials - Terms
DIN 51939:2004 Testing of carbon materials - Determination of floating coke content in calcined coke - Solid materials
DIN EN 60112:2010 Method for the determination of the proof and the comparative tracking indices of solid insulating materials (IEC 60112:2003 + A1:2009); German version EN 60112:2003 + A1:2009
DIN 51926:2009 Testing of carbonaceous materials - Determination of the content of mesophase in binding materials by quantitative image analysis - Binding and impregnating materials
DIN 51926:2016 Testing of carbonaceous materials - Determination of the content of mesophase in binding materials by quantitative image analysis - Binding and impregnating materials
DIN 51075-3:1982 Testing of ceramic materials; chemical analysis of silicon carbide; determination of the total carbon content
DIN 51926:2016-08 Testing of carbonaceous materials - Determination of the content of mesophase in binding materials by quantitative image analysis - Binding and impregnating materials
DIN 55652:2003 Solvents for paints and varnishes - Determination of acidity of traces
DIN EN 10179:1990-04 Chemical analysis of ferrous materials; determination of nitrogen (trace amounts) in steels; spectrophotometric method; German version EN 10179:1989
DIN EN ISO 2439:2009 Flexible cellular polymeric materials - Determination of hardness (indentation technique) (ISO 2439:2008); English version of DIN EN ISO 2439:2009-05
DIN EN ISO 2439:2009-05 Flexible cellular polymeric materials - Determination of hardness (indentation technique) (ISO 2439:2008); German version EN ISO 2439:2008
DIN 51912:1998 Testing of carbon materials - Determination of hydrogen content - Solid matters
DIN 51933:2012-12 Testing of carbonaceous materials - Determination of content of dedusting substances in cokes by extraction - Solid materials
DIN 51914:1985 Testing of carbon materials; determination of tensile strength; solid matters
DIN 51075-5:1982 Testing of ceramic materials; chemical analysis of silicon carbide; indirect determination of the free carbon content
DIN 51075-2:1984 Testing of ceramic materials; chemical analysis of silicon carbide; direct determination of the free carbon content
DIN 51904:2012-11 Testing of carbonaceous materials - Determination of water content - Solid matters
DIN 51933:2012 Testing of carbonaceous materials - Determination of content of dedusting substances in cokes by extraction - Solid materials
DIN 51921:2014-09 Testing of carbonaceous materials - Determination of content of matter insoluble in quinoline - Binding and impregnating materials
DIN EN ISO 14577-1:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2002); German version EN ISO 14577-1:2002
DIN EN 10179:1990 Chemical analysis of ferrous materials; determination of nitrogen (trace amounts) in steels; spectrophotometric method; German version EN 10179:1989
DIN 51937:1994 Testing of carbon materials; determination of anisotropy degree; solid materials
DIN CEN/TS 16375:2013-03*DIN SPEC 10791:2013-03 Liming materials - Determination of the amount of residual finely ground carbonate in soils - Volumetric method; German version CEN/TS 16375:2013
DIN EN ISO 14577-1:2015-11 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2015); German version EN ISO 14577-1:2015
DIN 53579:2015-04 Testing of flexible cellular materials - Indentation test on finished parts
DIN 22022-2:2001 Solid fuels - Determination of contents of trace elements - Part 2: ICP-OES
DIN 22022-7:2014 Solid fuels - Determination of contents of trace elements - Part 7: ICP-MS
DIN 51910:2009 Testing of carbonaceous materials - Determination of compressive strength - Solid materials
DIN 51910:2020-12 Testing of carbonaceous materials - Determination of compressive strength - Solid materials
DIN 51914:2020-12 Testing of carbonaceous materials - Determination of tensile strength - Solid materials
DIN 51914:2009 Testing of carbonaceous materials - Determination of tensile strength - Solid materials
DIN 51937:1994-07 Testing of carbon materials; determination of anisotropy degree; solid materials
DIN 51901:2006-11 Testing of carbonaceous materials - Determination of density by the xylene method - Solid materials
DIN EN ISO 14577-3:2015-11 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2015); German version EN ISO 14577-3:2015
DIN 22022-3:2001 Solid fuels - Determination of trace elements - Part 3: AAS-flame method
DIN 51075-1:1982 Testing of ceramic materials; chemical analysis of silicon carbide; sample preparation and calculation of silicon carbide content
DIN 51942 Berichtigung 1:2006 Testing of carbonaceous materials - Determination of dynamic moduls of elasticity by pulse excitation - Solid materials, Corrigenda to DIN 51942:2002-03
DIN 51944:1999 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
DIN 51902:2009 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN 51944:2009 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
DIN 51916:2013 Testing of carbonaceous materials - Determination of apparent density after tamping - Solid materials
DIN 51922:2016-08 Testing of carbonaceous materials - Determination of ash value - Binding and impregnating materials
DIN 51905:2014-09 Testing of carbonaceous materials - Determination of coking value - Binding and impregnating materials
DIN 51079-1:2004 Testing of ceramic materials - Chemical analysis of silicon carbide used as raw material and as constituent in materials - Part 1: Decomposition with sodium carbonate and boric acid
DIN 15586-2:1983 Mechanical properties of sensitized materials; determination of the scratch resistance on photographic films
DIN EN ISO 14577-2:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines (ISO 14577-2:2002); German version EN ISO 14577-2:2002
DIN EN ISO 14577-3:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2002); German version EN ISO 14557-3:2002
DIN 51076-1:1991 Testing of ceramic materials; chemical analysis of silicon carbide as main or minor constituent of ceramic materials; determination of SiC in materials with oxidic components and binding materials

Professional Standard - Aerospace, carbon material trace

QJ 2781A-2004 Determination of the carbon content,the hydrogen content and the nitrogen contene of carbonaceous material
QJ 2781-1995 Method for Determination of Carbon, Hydrogen and Nitrogen Content in Carbon Materials
QJ 2509-1993 Test method for ash content of carbon/carbon composite materials
QJ 2691-1994 Integral felt carbon/carbon composite throat liner products
QJ 20020-2011 Specification for carbon/carbon sealing material used in turbopump of rocket engine
QJ 2305-1992 Test method for tensile properties of three-dimensional carbon/carbon composite materials

International Organization for Standardization (ISO), carbon material trace

ISO/TR 29381:2008 Metallic materials - Measurement of mechanical properties by an instrumented indentation test - Indentation tensile properties
ISO/TS 19278:2019 Plastics — Instrumented micro-indentation test for hardness measurement
ISO 8658:1997 Carbonaceous materials for use in the production of aluminium - Green and calcined coke - Determination of trace elements by flame atomic absorption spectroscopy
ISO 17541:2014 Plastics - Quantitative evaluation of scratch-induced damage and scratch visibility
ISO 14435:2005 Carbonaceous materials for the production of aluminium - Petroleum coke - Determination of trace metals by inductively coupled plasma atomic emission spectrometry
ISO/DTS 19096 Metallic materials — Instrumented indentation test for hardness and materials parameters — Evaluation of stress change using indentation force differences
ISO/TS 19096:2023 Metallic materials — Instrumented indentation test for hardness and materials parameters — Evaluation of stress change using indentation force differences
ISO 9406:1988 Carbonaceous materials for the production of aluminium; green coke; determination of volatile matter content by gravimetric analysis
ISO 9406:1995 Carbonaceous materials for the production of aluminium - Green coke - Determination of volatile matter content by gravimetric analysis
ISO 14577-5:2022 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 5: Linear elastic dynamic instrumented indentation testing (DIIT)
ISO 18142:2014 Carbonaceous materials for the production of primary aluminium - Baked carbon bodies - Determination of the dynamic elasticity modulus by the resonance method
ISO 22526-2:2020 Plastics — Carbon and environmental footprint of biobased plastics — Part 2: Material carbon footprint, amount (mass) of CO2 removed from the air and incorporated into polymer molecule
ISO 2439:1972 Title missing - Legacy paper document
ISO 2439:2008 Flexible cellular polymeric materials - Determination of hardness (indentation technique)
ISO 12108:2012 Metallic materials - Fatigue testing - Fatigue crack growth method
ISO 12108:2002 Metallic materials - Fatigue testing - Fatigue crack growth method
ISO 12108:2018 Metallic materials - Fatigue testing - Fatigue crack growth method
ISO 2439:1980 Polymeric materials, cellular flexible; Determination of hardness (indentation technique)
ISO 14577-4:2007 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings
ISO 14577-4:2016 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings
ISO 14577-1:2002 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method
ISO 14577-1:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method
ISO/CD 14577-1:2023 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 1: Test method
ISO 10237:1997 Carbonaceous materials for use in the production of aluminium - Calcined coke - Determination of residual-hydrogen content
ISO 22821:2021 Carbon-fibre-reinforced composites - Determination of fibre weight content by thermogravimetry (TG)
ISO 925:1975 Title missing - Legacy paper document
ISO 925:2019 Solid mineral fuels — Determination of carbonate carbon content — Gravimetric method
ISO 8005:1984 Carbonaceous materials used in the production of aluminium; Green and calcined coke; Determination of ash content
ISO 5931:2000 Carbonaceous materials used in the production of aluminium - Calcined coke and calcined carbon products - Determination of total sulfur by the Eschka method
ISO/CD 14577-3:2023 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 3: Calibration of reference blocks
ISO/TS 14425:1999 Carbonaceous materials used in the production of aluminium - Cold-ramming pastes - Determination of volatile-matter content of unbaked pastes
ISO 10238:1999 Carbonaceous materials used in the production of aluminium - Pitch for electrodes - Determination of sulfur content by an instrumental method
ISO/DIS 14127:2023 Carbon-fibre-reinforced composites — Determination of the resin, fibre and void contents
ISO 14577-3:2002 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks
ISO 14577-3:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks

Korean Agency for Technology and Standards (KATS), carbon material trace

KS B 0950-2009 Metallic materials－Instrumented indentation test for indentation tensile properties
KS M ISO 17541:2016 Plastics － Quantitative evaluation of scratch-induced damage and scratch visibility
KS M ISO 14435-2016(2021) Carbonaceous materials for the production of aluminium－Petroleum coke－Determination of trace metals by inductively coupled plasma atomic emission spectrometry
KS B 0950-2009(2019) Metallic materials－Instrumented indentation test for indentation tensile properties
KS M ISO 8658:2003 Carbonaceous materials for use in the production of aluminium－Green and calcined coke－Determination of trace elements by flame atomic absorption spectroscopy
KS D 1780-2016(2021) General rules for determination of carbon in metallic materials
KS M ISO 17541-2016(2021) Plastics － Quantitative evaluation of scratch-induced damage and scratch visibility
KS M ISO 14435:2011 Carbonaceous materials for the production of aluminium-Petroleum coke-Determination of trace metals by inductively coupled plasma atomic emission spectrometry
KS M ISO 14435:2016 Carbonaceous materials for the production of aluminium－Petroleum coke－Determination of trace metals by inductively coupled plasma atomic emission spectrometry
KS L 3407-2010 High purity graphite materials
KS L 3407-1980 High purity graphite materials
KS D 1780-2011 General rules for determination of carbon in metallic materials
KS C IEC 60112:2005 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
KS D ISO 14577-4:2011 Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 4:Test method for metallic and non-metallic coatings
KS M 1962-2017(2022) Ethylene and propylene for industrial use — Determination of traces of carbon monoxide and carbon dioxide — Gas chromatographic method
KS M 3153-1997 POLYCARBONATE MOULDING MATERIALS
KS M 3153-1982 POLYCARBONATE MOULDING MATERIALS
KS B ISO 12108:2004 Metallic materials－Fatigue testing－Fatigue crack growth method
KS M ISO 2439-2012(2017) Flexible cellular polymeric materials－ Determination of hardness(indentation technique)
KS M ISO 2439-2012(2022) Flexible cellular polymeric materials－ Determination of hardness(indentation technique)
KS M ISO 11412:2004 Carbonaceous materials for the production of aluminium-Calcined coke-Determination of water content
KS M ISO 11412:2013 Carbonaceous materials for the production of aluminium－Calcined coke－Determination of water content
KS F 4708-2002 Basic magnesium carbonate heat insulating material
KS F 4708-1987 Basic magnesium carbonate heat insulating material
KS F 4708-2023 Basic magnesium carbonate heat insulating material
KS M ISO 2439:2012 Flexible cellular polymeric materials－ Determination of hardness(indentation technique)
KS M 3099-2012(2022) Plastics－Quantitative evaluation of scratch-induced damages on polymeric and coating materials－Part 1： Under a constant load condition
KS B ISO 14577-1:2004 Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 1:Test method
KS B ISO 14577-1:2015 Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 1:Test method
KS L 3410-1995 Chemical analysis for high purity carbon materials
KS B ISO 14577-1-2004(2009) Metallic materials－Instrumented indentation test for hardness and materials parameters－Part 1：Test method
KS M ISO 9406-2004(2019) Carbonaceous materials for the production of aluminium－Green coke－Determination of volatile matter content by gravimetric analysis
KS E ISO 925:2022 Solid mineral fuels — Determination of carbonate carbon content — Gravimetric method
KS L 3416-2006 Methods for chemical analysis of refractories containing carbon and/or silicon-carbide
KS C 2004-2003 TEST METHOD FOR THE PROOF TRACKING INDICES OF SOLID ELECTRICAL INSULATING MATERIALS
KS M ISO 10237:2004 Carbonaceous materials for use in the production of aluminium-Calcined coke-Determination of residual-hydrogen content
KS M ISO 9055:2004 Carbonaceous materials for the production of aluminium-Pitch for electrodes-Determination of sulfur content by the bomb method
KS M ISO 9055-2004(2009) Carbonaceous materials for the production of aluminium－Pitch for electrodes－Determination of sulfur content by the bomb method
KS M ISO 10237:2013 Carbonaceous materials for use in the production of aluminium－Calcined coke－Determination of residual－hydrogen content
KS M ISO 10237-2004(2009) Carbonaceous materials for use in the production of aluminium－Calcined coke－Determination of residual－hydrogen content
KS M ISO 9055:2013 Carbonaceous materials for the production of aluminium－Pitch for electrodes－Determination of sulfur content by the bomb method
KS D 1780-1993 General rules for determination of carbon in metallic materials
KS L 3409-1995 Physical testing methods for high purity carbon material
KS D 1780-2016 General rules for determination of carbon in metallic materials
KS B ISO 14577-3-2004(2009) Metallic materials－Instrumented indentation test for hardness and materials parameters－Part 3：Calibration of reference blocks
KS L 3416-2016 Methods for chemical analysis of refractories containing carbon and/or silicon-carbide
KS L 3416-2016(2021) Methods for chemical analysis of refractories containing carbon and/or silicon-carbide
KS M ISO 5931:2003 Carbonaceous materials used in the production of aluminium－Calcined coke and calcined carbon products－Determination of total sulfur by the Eschka method
KS M ISO 12977:2004 Carbonaceous materials used in the production of aluminium－Pitch for electrodes－Determination of volatile matter content
KS M ISO 14127:2019 Carbon-fibre-reinforced composites — Determination of the resin, fibre and void contents
KS M ISO 10238-2004(2009) Carbonaceous materials used in the production of aluminium－Pitch for electrodes－Determination of sulfur content by an instrumental method
KS M ISO 12977-2004(2019) Carbonaceous materials used in the production of aluminium－Pitch for electrodes－Determination of volatile matter content
KS M ISO 14127:2014 Carbon-fibre-reinforced composites — Determination of the resin, fibre and void contents
KS B ISO 14577-3:2004 Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 3:Calibration of reference blocks
KS B ISO 14577-3:2017 Metallic materials－Instrumented indentation test for hardness and materials parameters－Part 3：Calibration of reference blocks
KS M ISO 9406:2004 Carbonaceous materials for the production of aluminium－Green coke－Determination of volatile matter content by gravimetric analysis
KS L 3409-2010 Test methods for physical properties of graphite materials
KS L 3410-2010 Chemical analysis for highly purity graphite materials
KS L 3409-2015 Test methods for physical properties of graphite materials
KS L 3410-2015 Chemical analysis for highly purity graphite materials
KS F 2516-2007 Method of test for content of soft particles in coarse aggregate by scratching
KS F 2516-1985 Method of test for content of soft particles in coarse aggregate by scratching

HU-MSZT, carbon material trace

MSZ 8628/1-1971

IT-UNI, carbon material trace

Professional Standard - Electricity, carbon material trace

DL/T 1865-2018 Calibration procedures for trace total organic carbon analyzers

Professional Standard - Ferrous Metallurgy, carbon material trace

YB/T 1430-1997 Carbon materials.Determination of the sulphur content
YB/T 917-1997 Carbonaceous materials.Determination of vanadium content.Colorimetric method
YB/T 908-1997 Carbon materials.Determination of open porosity
YB/T 1428-1997 Carbon materials.Determination moisture in air-dried sample
YB/T 120-1997 Method for determination of specific resistance of carbon materials
YB/T 119-1997 Carbon materials.Determination method of the bulk density

British Standards Institution (BSI), carbon material trace

PD ISO/TR 29381:2008 Metallic materials. Measurement of mechanical properties by an instrumented indentation test. Indentation tensile properties
BS EN ISO 14577-1:2002 Metallic materials. Instrumented indentation test for hardness and materials parameters. Test method
BS EN ISO 14577-1:2015 Metallic materials. Instrumented indentation test for hardness and materials parameters. Test method
BS ISO 17541:2014 Plastics. Quantitative evaluation of scratch-induced damage and scratch visibility
BS ISO 14435:2005 Carbonaceous materials for the production of aluminium. Petroleum coke. Determination of trace metals by inductively coupled plasma atomic emission spectrometry
BS ISO 14435:2006 Carbonaceous materials for the production of aluminium - Petroleum coke - Determination of trace metals by inductively coupled plasma atomic emission spectrometry
BS ISO 14577-5:2022 Metallic materials. Instrumented indentation test for hardness and materials parameters - Linear elastic dynamic instrumented indentation testing (DIIT)
BS EN 2558:1997 Carbon fibre preimpregnates - Determination of the volatile content
BS EN ISO 14577-4:2007 Metallic materials. Instrumented indentation test for hardness and materials parameters. Test method for metallic and non-metallic coatings
BS EN ISO 22526-2:2021 Plastics. Carbon and environmental footprint of biobased plastics - Material carbon footprint, amount (mass) of CO2 removed from the air and incorporated into polymer molecule
BS ISO 12108:2012 Metallic materials. Fatigue testing. Fatigue crack growth method
20/30383255 DC BS ISO 14577-5. Metallic materials. Instrumented indentation test for hardness and materials parameters. Part 5. Linear elastic dynamic instrumented indentation testing (DIIT)
23/30472739 DC BS EN 10179. Steels. Determination of nitrogen (trace amounts). Spectrophotometric method
BS 131-6:1998 Notched bar tests - Method for precision determination of Charpy V-notch impact energies for metals
BS EN ISO 2439:2001 Flexible cellular polymeric materials - Determination of hardness (indentation technique)
BS EN ISO 2439:2009 Flexible cellular polymeric materials. Determination of hardness (indentation technique)
BS EN ISO 2439:2008 Flexible cellular polymeric materials - Determination of hardness (indentation technique)
BS ISO 925:2019 Solid mineral fuels. Determination of carbonate carbon content. Gravimetric method
BS EN 14397-2:2004 Fertilizers and liming materials - Determination of carbon dioxide - Method for liming materials
BS EN ISO 14577-3:2002 Metallic materials. Instrumented indentation test for hardness and materials parameters. Calibration of reference blocks
BS EN ISO 14577-3:2015 Metallic materials. Instrumented indentation test for hardness and materials parameters. Calibration of reference blocks
DD CEN/TS 13130-17:2005 Materials and articles in contact with foodstuffs. Plastics substances subject to limitation - Determination of carbonyl chloride in plastics
BS ISO 22821:2021 Carbon-fibre-reinforced composites. Determination of fibre weight content by thermogravimetry (TG)
PD ISO/TS 19278:2019 Plastics. Instrumented micro-indentation test for hardness measurement
BS 4S 14:1964 Specification for aircraft material - Carbon case-hardening steel
4S 14-1964 Specification for aircraft material. Carbon case-hardening steel
BS 131-7:1998 Notched bar tests - Specification for verification of the test machine used for precision determination of Charpy V-notch impact energies for metals

RO-ASRO, carbon material trace

STAS 9281/4-1991 Carborundic refractory materials. Silicon carbide content determination
STAS 10054-1975 PLASTICS Determination of the acetone soluble matter (resin content) of phenolic moulding materials
STAS 9281/2-1991 Carborundic refractory materials. Total carbon content determination
STAS 9281/6-1974 SILICON CARBIDE REFRACTORIES Determination of aluminium Irioxyde content
STAS 9281/3-1973 SILICON CARBIDE REFRACTORIES DeLerniinalion of free carbon
STAS 6205-1986 ELECTRICAL INSULATING MATERIALS Method for determining the comparative and the proof tracking indices under moist conditions

未注明发布机构, carbon material trace

BS ISO 14435:2005(2006) Carbonaceous materials for the production of aluminium — Petroleum coke — Determination of trace metals by inductively coupled plasma atomic emission spectrometry
AS/NZS 60112:2003
UNI 5381 Heat treatment of ferrous materials. carburization
BS EN ISO 22526-2:2021(2022) Plastics — Carbon and environmental footprint of biobased plastics Part 2 : Material carbon footprint, amount (mass) of CO2 removed from the air and incorporated into polymer molecule

CH-SNV, carbon material trace

VSM 34503-1937

CEN - European Committee for Standardization, carbon material trace

EN ISO 14577-1:2002 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method
EN ISO 14577-3:2002 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks
EN ISO 14577-2:2002 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines

Danish Standards Foundation, carbon material trace

DS/EN 10179:1989 Chemical analysis of ferrous materials. Determination of nitrogen (trace amount) in steels. Spectrophotometric method
DS/EN 60112/A1:2010 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
DS/EN 60112/Corr.1:2003 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
DS/EN 60112:2003 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
DS/EN IEC 60112:2020 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
DS/EN 25923:1994 Fire protection. Fire extinguishing media. Carbon dioxide
DS/EN ISO 14577-1:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method
DS/EN ISO 2439:2009 Flexible cellular polymeric materials - Determination of hardness (indentation technique)
DS/ISO 925:1998 Solid mineral fuels - Determination of carbonate carbon content - Gravimetric method
DS/EN ISO 14577-3:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks
DS/EN 59:1978 Glass reinforced plastics. Measurement of hardness by means of a Barcol impressor

Taiwan Provincial Standard of the People's Republic of China, carbon material trace

CNS 11070-1984 General Rules of Determination for Carbon in Metallic Materials
CNS 13629-1996 Polycarbonate Moulding Materials
CNS 12909-1991 Methods of Test for Carbon in Nickel Materials for Electron Tubes

KR-KS, carbon material trace

KS M ISO 14435-2016 Carbonaceous materials for the production of aluminium－Petroleum coke－Determination of trace metals by inductively coupled plasma atomic emission spectrometry
KS M ISO 17541-2016 Plastics － Quantitative evaluation of scratch-induced damage and scratch visibility
KS E ISO 925-2022 Solid mineral fuels — Determination of carbonate carbon content — Gravimetric method
KS M ISO 14127-2019 Carbon-fibre-reinforced composites — Determination of the resin, fibre and void contents

GOSTR, carbon material trace

GOST R 57970-2017 Carbon composites. Carbon composites reinforced with carbon fiber. Classification
GOST R 58016-2017 Ceramic composites. Silicon carbide composites reinforced with silicon carbide fiber. Classification
GOST R 58850-2020 Bulk carbon nanostructured material. Specifications

工业和信息化部/国家能源局, carbon material trace

JB/T 12721-2016 Technical specifications for in-situ nanoindentation/scratch tester for solid materials
JB/T 13225-2017 In-situ tensile-indentation composite mechanical property testing system for solid materials

CU-NC, carbon material trace

NC 04-20-1968 Determination of total carbon in ferrous materials
NC 54-331-1985 Construction Materials and Products. Calcium Carbonate for Industrial Use. Quality Specifications
NC 84-02-1984 Refreshments. Carbonated Refreshments. Determlnation oF Content
NC 84-23-1987 Soft-Drinks. Carbonated Soft-Drinks. Quality Specifications

Association Francaise de Normalisation, carbon material trace

NF T56-111:1986 Plastics. Flexible cellular materials. Determination of identation characteristics.
NF A03-155-1:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1 : test method.
NF C26-220*NF EN IEC 60112:2020 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
NF C26-220*NF EN 60112:2003 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
NF EN ISO 22526-2:2021 Plastiques - Empreinte carbone et environnementale des plastiques biosourcés - Partie 2 : empreinte carbone des matériaux, quantité (masse) de CO2 captée dans l'air et incorporée dans les molécules de polymères
NF A06-373*NF EN 10179:1989 Chemical analysis of ferrous materials. Determination of nitrogen (trace amounts) in steels. Spectrophotometric method.
NF B49-421:1990 Refractory products. Chemical analysis of aluminous, siliceous, silicon carbide, carbon and metallic silicon refractory products.
NF T56-111*NF EN ISO 2439:2009 Flexible cellular polymeric materials - Determination of hardness (indentation technique).
NF EN ISO 2439:2009 Matériaux polymères alvéolaires souples - Détermination de la dureté (technique par indentation)
NF T20-807:1980 Ethylene and propylene for industrial use. Determination of traces of carbon monoxide and carbon dioxide. Gas chromatographic method.
NF EN 14574:2015 Géosynthétiques - Détermination de la résistance au poinçonnement pyramidal des géosynthétiques sur support
NF A03-155-1*NF EN ISO 14577-1:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1 : test method
NF T56-116:1979 Rubber or plastics cellular materials. Static fatigue test under constant indentation force flexible cellular materials.
NF M60-812-2:2006 Nuclear energy - Measurement of environmental radioactivity - Part 2 : measurement of carbon 14 activity by liquid scintillation in carbon matrices in the environment.
NF T20-186*NF ISO 9406:1989 Carbonaceous materials for the production of aluminium. Green coke. Determination of volatile matter content by gravimetric analysis.
NF T51-798-2*NF EN ISO 22526-2:2021 Plastics - Carbon and environmental footprint of biobased plastics - Part 2 : material carbon footprint, amount (mass) of CO2 removed from the air and incorporated into polymer molecule
NF A03-155-3*NF EN ISO 14577-3:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3 : calibration of reference blocks
NF A03-155-3:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3 : calibration of reference blocks.
NF EN 16718:2016 Produits de préservation du bois et matériaux à base de bois - Dosage du carbone organique total (COT) dans les bois et matériaux à base de bois

American Society for Testing and Materials (ASTM), carbon material trace

ASTM A833-84(2001) Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM A833-84(1996) Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM A833-08 Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM E384-99 Standard Test Method for Microindentation Hardness of Materials
ASTM E384-08a Standard Test Method for Microindentation Hardness of Materials
ASTM E384-05 Standard Test Method for Microindentation Hardness of Materials
ASTM E384-07a Standard Test Method for Microindentation Hardness of Materials
ASTM E384-07 Standard Test Method for Microindentation Hardness of Materials
ASTM E384-22 Standard Test Method for Microindentation Hardness of Materials
ASTM E384-17 Standard Test Method for Microindentation Hardness of Materials
ASTM E103-12 Standard Practice for Rapid Indentation Hardness Testing of Metallic Materials
ASTM E103-17 Standard Practice for Rapid Indentation Hardness Testing of Metallic Materials
ASTM C571-81(1990) Methods for Chemical Analysis of Carbon and Carbon-Ceramic Refractories
ASTM D6264/D6264M-07 Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force
ASTM D6264/D6264M-12 Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force
ASTM A833-08a Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM C607-88(2005) Standard Practice for Coking Large Shapes of Carbon-Bearing Materials
ASTM D3638-12 Standard Test Method for Comparative Tracking Index of Electrical Insulating Materials
ASTM E384-08 Standard Test Method for Microindentation Hardness of Materials
ASTM B933-09 Standard Test Method for Microindentation Hardness of Powder Metallurgy (P/M) Materials
ASTM B933-04 Standard Test Method for Microindentation Hardness of Powder Metallurgy (P/M) Materials
ASTM E103-84(1996) Standard Test Method for Rapid Indentation Hardness Testing of Metallic Materials
ASTM E103-84(2002) Standard Test Method for Rapid Indentation Hardness Testing of Metallic Materials
ASTM E3246-21 Standard Test Methods for Differential Indentation Depth Hardness of Metallic Materials
ASTM E103-84(1996)e1 Standard Test Method for Rapid Indentation Hardness Testing of Metallic Materials
ASTM E3246-22 Standard Test Methods for Differential Indentation Depth Hardness of Metallic Materials
ASTM D1368-89 Test Method for Trace Concentrations of Lead in Primary Reference Fuels
ASTM C1099-92(1997) Standard Test Method for Modulus of Rupture of Carbon-Containing Refractory Materials at Elevated Temperatures
ASTM C1099-92(2002) Standard Test Method for Modulus of Rupture of Carbon-Containing Refractory Materials at Elevated Temperatures
ASTM C1099-07(2019) Standard Test Method for Modulus of Rupture of Carbon-Containing Refractory Materials at Elevated Temperatures
ASTM D3638-07 Standard Test Method for Comparative Tracking Index of Electrical Insulating Materials
ASTM B933-20 Standard Test Method for Microindentation Hardness of Powder Metallurgy (PM) Materials
ASTM D5288-10 Standard Test Method for Determining the Tracking Index of Electrical Insulating Materials Using Various Electrode Materials (Excluding Platinum)
ASTM C607-88(2000) Standard Practice for Coking Large Shapes of Carbon-Bearing Materials
ASTM C607-88(2016) Standard Practice for Coking Large Shapes of Carbon-Bearing Materials
ASTM A261-54 Specification for Heat-Treated Carbon-Steel Bolting Material
ASTM D7187-05 Standard Test Method for Measuring Mechanistic Aspects of Scratch/Mar Behavior of Paint Coatings by Nanoscratching
ASTM D7504-20 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number
ASTM D7504-17 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number
ASTM D7504-21 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number
ASTM D7504-17a Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number
ASTM D7504-16 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number
ASTM D7504-09 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number
ASTM D7662-15(2020) Standard Test Method for Carbon Content in Carbon Black Feedstock Oils

RU-GOST R, carbon material trace

GOST R ISO 14435-2017 Carbonaceous materials for the production of aluminium. Petroleum coke. Determination of trace metals by inductively coupled plasma atomic emission spectrometry
GOST EN 14397-2-2014 Fertilizers and liming materials. Determination of carbon dioxide content. Part 2. Method for liming materials
GOST 22692-1977 Carbon materials. Method for determination of ash
GOST EN 14397-1-2013 Fertilizers and liming materials. Determination of carbon dioxide content. Part 1. Method for solid fertilizers
GOST R 8.748-2011 State system for ensuring the uniformity of measurements. Metallic materials. Instrumented indentation test for hardness and materials parameters. Part 1. Test method
PNST 63-2015 Materials from multiwall carbon nanotubes. Specifications
GOST 11930.1-1979 Hard-facing materials. Methods of carbon determination
GOST 28005-1988 Carbonic fibre material Ural. Specifications
GOST R ISO 11412-2014 Carbonaceous materials for the production of aluminium. Calcined coke. Determination of water content
GOST R ISO 10237-2016 Carbonaceous materials used in the production of aluminium. Calcined coke. Determination of residual-hydrogen content
PNST 64-2015 Material bulk nanostructured carbon. Specifications
GOST 2642.15-1997 Refractories and refractory raw materials. Method for determination of general carbon
GOST 2642.15-2021 Refractories and refractory raw materials. Methods for determination of general carbon

TH-TISI, carbon material trace

TIS 2181-2004 Fatigue crack growth method for metallic materials [iso title: metallic materials.fatigue testing.fatigue crack grouwth method]
TIS 2460-2010 Method for the determination of the proof and the comparative tracking indices of solid insulating materials

European Committee for Standardization (CEN), carbon material trace

EN ISO 14577-1:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2015)
EN ISO 14577-3:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2015)
EN ISO 14577-2:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines
EN ISO 22526-2:2021 Plastics - Carbon and environmental footprint of biobased plastics - Part 2: Material carbon footprint, amount (mass) of CO2 removed from the air and incorporated into polymer molecule (ISO 22526-2:2020)
prEN ISO 14577-1 rev Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method
EN 16117-2:2012 Copper and copper alloys - Determination of copper content - Part 2: Electrolytic determination of copper in materials with copper content higher than 99,80 %
CEN/TS 16375:2013 Liming materials - Determination of the amount of residual finely ground carbonate in soils - Volumetric method
EN ISO 2439:2008 Flexible cellular polymeric materials - Determination of hardness (indentation technique) (ISO 2439:2008)
CWA 17552-2020 Engineering materials - Electronic data interchange - Instrumented indentation test data
CWA 17552:2020 Engineering materials - Electronic data interchange - Instrumented indentation test data
PD CEN/TS 16375:2013 Liming materials - Determination of the amount of residual finely ground carbonate in soils - Volumetric method
prEN ISO 14577-3 rev Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks
EN 2558:1997 Aerospace series - Carbon fibre preimpregnates - Determination of the volatile content

International Federation of Trucks and Engines, carbon material trace

NAVISTAR MPAPS E06-501-2014 CARBON SCRAPER RING MATERIAL
NAVISTAR MPAPS K15-5003-2014 Fluorocarbon (FKM) Seal Material

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, carbon material trace

GB/T 13245-1991 Refractories containing carbon--Determination of the total carbon--Combustion gravimetric method
GB/T 16555.2-1996 Chemical analysis for silicon carbide refractories--Determination of silicon carbide--Gas volumetric method
GB/T 16555.1-1996 Chemical analysis for silicon carbide refractories--Determination of silicon carbide--Absorb gravimetric method
GB/T 24179-2023 Indentation Strain Method for Determination of Residual Stress of Metallic Materials
GB/T 24179-2009 Metallic materials.Residual stress determination.The indentation strain-gage method
GB/T 4207-2012/IEC 60112-2009 Method for the determination of the proof and the comparative tracking indicesof solid insulating materials
GB/T 4207-2012/IEC 60112:2009 Method for the determination of the proof and the comparative tracking indicesof solid insulating materials
GB/T 4207-2022 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
GB/T 4207-2012 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
GB/T 42274-2022 Determination of the content and distribution of trace elements (magnesium, gallium) in aluminum nitride materials—Secondary ion mass spectrometry
GB/T 8718-1988 The terms of carbon materials
GB/T 41605-2022 Silicon nitride materials for rolling bearing balls—Test method for fracture resistance at room temperature—Indentation fracture (IF) method
GB/T 24523-2009 Test method for rapid indentation (Brinell)hardness testing of metallic materials
GB/T 30021-2013 Warp knitting carbon fiber reinforcements
GB/T 24179-2009(英文版) Metallic materials—Residual stress determination—The indentation straingage method
GB/T 13246-1991 Refractories containing carbon--Determination of magnesium oxide content--CYDTA volumetric method
GB/T 21838.1-2008 Metallic materials.Instrumented indentation test for hardness and materials parameters.Part 1:Test method
GB/T 41638.2-2023 Carbon and environmental footprints of plastics Bio-based plastics Part 2: Carbon footprint of materials Amount (mass) of CO2 incorporated into polymer molecules from the air
GB/T 16555.6-1996 Chemical analysis for silicon carbide refractories--Determination of silicon dioxide
GB/T 4207-2003 Method for determining the comparative and the proof tracking indices of solid insulating materials under moist conditions
GB/T 16555.3-1996 Chemical analysis for silicon carbide refractories--determination of free silicon--Gas volumetric method
GB/T 22067.3-2008 Instrumented indentation tests for hardness and material parameters of metallic materials - Part 3: Calibration of standard blocks
GB/T 21838.3-2008 Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 3:calibration of reference blocks
GB/T 16555-2008 Chemical analysis of refractories containing carbon and silicon carbide or nitride
GB/T 16555.4-1996 Chemical analysis for silicon carbide refractories--Determination of alumina--EDTA gas volumetric method

Society of Automotive Engineers (SAE), carbon material trace

SAE AMS3022D-2011 Reference Fluid For Testing Hydrocarbon Fuel Resistant Materials, 10% Aromatic Content
SAE AMS5062H-2009 Steel, Low Carbon, Bars, Forgings, Tubing, Sheet, Strip, and Plate, 0.25 Carbon, Maximum
SAE AMS3138-1980 COATING MATERIALS, FLUOROCARBON ELASTOMERIC
SAE AMS3138A-1985 COATING MATERIALS, FLUOROCARBON ELASTOMERIC
SAE AMS3022C-1994 Reference Fluid For Testing Hydrocarbon Fuel Resistant Materials, 10% Aromatic Content
SAE AMS-T-5066A-2015 Tubing, Carbon Steel (1025), (Aircraft Quality)
SAE AMS-T-5066B-2020 Tubing, Carbon Steel (1025) (Aircraft Quality)
SAE AMS-P-83310-1998 Plastic Sheet, Polycarbonate, Transparent
SAE AMS3611D-1994 Plastic Sheet, Polycarbonate General Purpose
SAE ARP4118A-2013 Isolation and Corrosion Protection of Dissimilar Materials, Carbon Composite Structure Repair
SAE AMS5043-2002 Steel, Sheet and Strip Forming (Special Quality) Low Carbon
SAE AS5729-2011 O-RING MOLDED FROM AMS7379 (FLUOROCARBON) MATERIAL
SAE AMS3611C-2011 PLASTIC SHEET, POLYCARBONATE General Purpose

ZA-SANS, carbon material trace

SANS 14577-1:2009 Metallic materials - Instrumented indentation test for hardness and materials parameters Part 1: Test method
SANS 14577-3:2009 Metallic materials - Instrumented indentation test for hardness and materials parameters Part 3: Calibration of reference blocks
SANS 14577-2:2009 Metallic materials - Instrumented indentation test for hardness and materials parameters Part 2: Verification and calibration of testing machines
SANS 125:2006 Solid mineral fuels — Determination of carbonate carbon content — Gravimetric method

Professional Standard - Building Materials, carbon material trace

JC/T 425-1991 glassy carbon material

国家建筑材料工业局, carbon material trace

JC 425-1991 glassy carbon materials

American National Standards Institute （ANSI), carbon material trace

ANSI/ASTM A833:1996 Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ANSI/ASTM E103:1984 Method for Rapid Indentation Hardness Testing of Metallic Materials
ANSI/ASTM D6260:1998 Test Method for Gravimetric Determination of Carbon Black in Nylon Materials
ANSI/ASTM D5288:2010 Test Method for Determining the Tracking Index of Electrical Insulating Materials Using Various Electrode Materials (Excluding Platinum)
ANSI/ASTM D3638:2012 Test Method for Comparative Tracking Index of Electrical Insulating Materials
ANSI/ASTM E110:1982 Test Method for Indentation Hardness of Metallic Materials by Portable Hardness Testers
ANSI/ASTM D3307:2001 PFA-Fluorocarbon Molding and Extrusion Materials, Specification for (08.03)

SE-SIS, carbon material trace

SIS 16 92 12-1975 Flexible cellular materials. Hardness testing by indentation
SIS SS-EN 10 179-1989 Chemical analysis of ferrous materials — Determination of nitrogen (trace amounts) in steel — spectrophotometric method
SIS SS IEC 112:1982 Method for determining the comparative and the proof tracking indices of solid insulating materials under moist conditions

Professional Standard - Machinery, carbon material trace

JB/T 7778.3-1995 Method of chemical analysis for silver tungsten carbide electrical contact material - Determination of total carbon content by gas volumetric method
JB/T 7775.3-1995 Copper, tungsten, tungsten carbide, vacuum contact materials, chemical analysis method, gas volumetric method, determination of carbon content
JB/T 4107.7-1999 Chemical analyse method for electrical contact materials.Determination of carbon content in the silver - graphite ( Determine carbon content by the gas volumetry method)
JB/T 7778.3-2008 Test methods for chemical analysis of silver-tungsten carbide electric contact material.Part 3:Determination of overall carbon content
JB/T 7778.4-1995 Method for chemical analysis of silver tungsten carbide electrical contact materials Acid separation-gas volumetric method for determination of free carbon content
JB/T 2934-1993 Carbon materials and products for machinery
JB/T 7775.2-2008 Test methods for chemical analysis of copper-tungsten-tungsten carbide electric contact material. Part 2: Determination of carbon content
JB/T 7778.4-2008 Test methods for chemical analysis of silver-tungsten carbide electric contact material.Part 4:Determination of free carbon content

Professional Standard - Aviation, carbon material trace

HB 5367.11-1986 Test method for modulus of elasticity of carbon graphite sealing materials
HB 5366-1986 Aerospace Carbon Graphite Sealing Materials

International Electrotechnical Commission (IEC), carbon material trace

IEC 60112:2003 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
IEC 60112:2003/COR2:2003 Method for the determination of the proof and the comparative tracking indices of solid insulating materials; Corrigendum 2
IEC 60112:2003/COR1:2003 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
IEC 60112:1979 Recommended method for determining the comparative tracking index of solid insulating materials under moist conditions

Japanese Industrial Standards Committee (JISC), carbon material trace

JIS C 2134:2007 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
JIS C 2134:2021 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
JIS H 1427:1996 Methods for determination of carbon in nickel materials for electron tubes
JIS R 7651:2007 Measurement of lattice parameters and crystallite sizes of carbon materials
JIS K 6719:1994 Polycarbonate moulding materials
JIS A 9506:1978 Basic magnesium carbonate heat insulating material
JIS R 2011:2007 Methods for chemical analysis of refractories containing carbon and/or silicon-carbide
JIS Z 2615:1996 General rules for determination of carbon in metallic materials
JIS K 0002:1998 Reference material -- Standard gas -- Carbon monoxide
JIS K 0003:1998 Reference material -- Standard gas -- Carbon dioxide

Professional Standard - Non-ferrous Metal, carbon material trace

YS/T 978-2014 Carbon/carbon composites guide shield of single crystal furnace
YS/T 977-2014 Carbon/carbon composites heat insulation cylinder of single crystal furnace
YS/T 792-2012 Carbon-carbon composites crucible used in single crystal furnace
YS/T 1600-2023 Determination of trace impurity elements in silicon carbide single crystal —Glow discharge mass spectrometry
YS/T 982-2014 Carbon/carbon U shape heating element of hydrogenation furnace

BE-NBN, carbon material trace

NBN T 46-003-1977 Flexible cellular materials - Hardness testinq by indentation techni-ques
NBN T 03-481-1984 Carbonaceous materials for the production of aluminium - Fitch for elec-trodes - Determination of content of quinoline-insoluble material
NBN T 03-480-1984 Carbonaceous materials for the production of aluminium - Pitch for elec-trodes - Determination of content of toluene-insoluble material
NBN T 46-003-1983 Polymeric materials, cellular flexible - Détermination of hardness (indentation technique)
NBN T 03-482-1988 Carbonaceous materials forthe production of aluminium - Calcined coke - Determination of apparent oil content - Heating method

VN-TCVN, carbon material trace

TCVN 6453-2008 Carbon composite implants

Indonesia Standards, carbon material trace

SNI 07-3033-1992 Carbon steel blooms and billets for forgings

AENOR, carbon material trace

UNE-EN 60112:2003/A1:2010 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
UNE-EN 60112:2003 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
UNE 61030:1975 REFRACTORY MATERIALS. GENERAL CHARACTERISTICS OF CARBON REFRACTORIES
UNE 61031:1975 REFRACTORY MATERIALS. GENERAL CHARACTERISTICS OF THE REFRACTORIES OF SILICA CARBIDE

CZ-CSN, carbon material trace

CSN 64 5440-1981 Determination of hardness y indentation techniques f flexible cellular materials
CSN ON 34 6265-1964
CSN ON 34 6228-1967 Iíarcl-carbon materiál for tlic brushe* of clcctrical niachines, Grade TU 75

TR-TSE, carbon material trace

TS 2706-1977 FLEXIBLE CELLULAR MATERIALS HARD NESS TESTING BY INDENTATION TECHNIQUES
TS 1111-1972 STEELtS AND IRON - CAKBON MATERIALS CLASSIFTCATION AND SYMBOLS

ES-AENOR, carbon material trace

UNKNOWN, carbon material trace

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, carbon material trace

GB/T 34559-2017 Test method for compressive property of C/C composites
GB/T 33501-2017 Test method for tensile property of C/C composites
GB/T 16555-2017 Chemical analysis of refractories containing carbon and silicon carbide or nitride

国家市场监督管理总局、中国国家标准化管理委员会, carbon material trace

GB/T 40388-2021 Test method for shear strength of C/C composites
GB/T 40724-2021 Terminology for carbon fiber and carbon fiber composites
GB/T 40006.7-2021 Plastics—Recycled plastics—Part 7: Polycarbonate(PC) materials

GM North America, carbon material trace

GM GM181M-1988 Spring Materials Carbon Steel Spring Strip
GM GM60M-1988 Spring Materials Hard Drawn Carbon Steel Spring Wire
GM GM184M-1988 Spring Materials Carbon Steel Spring Strip (Shown on GM181M)
GM GM182M-1988 Spring Materials Carbon Steel Spring Strip See GM181M
GM GM188M-1988 Spring Materials Hard Drawn High Carbon Steel Spring Wire
GM GM61M-1988 Spring Materials Oil Tempered Carbon Steel Spring Wire

YU-JUS, carbon material trace

JUS B.D8.241-1991 Refractories. Determination of total carbon content in naturalgraphite. Gas volumetric method
JUS B.D8.240-1982 Refractories. Chemical analysis silicon carbide production and raw materials

ES-UNE, carbon material trace

UNE-EN ISO 22526-2:2022 Plastics - Carbon and environmental footprint of biobased plastics - Part 2: Material carbon footprint, amount (mass) of CO2 removed from the air and incorporated into polymer molecule (ISO 22526-2:2020)
UNE-EN IEC 60112:2020 Method for the determination of the proof and the comparative tracking indices of solid insulating materials (Endorsed by Asociación Española de Normalización in January of 2021.)
UNE-EN ISO 14577-1:2016 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2015)
UNE-EN ISO 14577-3:2016 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2015)

GM Europe, carbon material trace

GME QK 006100-1984

Heilongjiang Provincial Standard of the People's Republic of China, carbon material trace

DB23/T 2492-2019 Test method for content of carbon, nitrogen, hydrogen, sulfur and oxygen in graphene materials

Standard Association of Australia （SAA）, carbon material trace

AS 3980:2016 Determination of gas content of coal and carbonaceous material — Direct desorption method

Liaoning Provincial Standard of the People's Republic of China, carbon material trace

DB21/T 2071-2013 Determination method of total carbon in magnesia carbonaceous refractories

Military Standard of the People's Republic of China-General Armament Department, carbon material trace

GJB 5084-2002 Specification for integrally braided carbon/carbon composite materials for throat liners
GJB 9546-2018 Specification for integrally braided carbon/carbon composite products for throat linings

National Metrological Verification Regulations of the People's Republic of China, carbon material trace

JJG 2091-1995 Verification Scheme of Measuring Instruments for Plastic Ball Indentation Hardness

国家林业和草原局, carbon material trace

LY/T 3197-2020 Carbon measurement procedures for bamboo products

Professional Standard - Electron, carbon material trace

SJ 2802-1987 Method for determination of trace Carbon dioxide in electronic grade gases--Hydrogen flame ionzation detertor method
SJ 2803-1987 Method for determination of trace carbon dioxide in electronic grade gases--Pre-cut hydrogen flame ionzation detector method
SJ 2801-1987 Method for determination of trace carbon monoxide in electronic grade gases--Precut hydrogen flame ionization detector method

Lithuanian Standards Office , carbon material trace

LST EN 60112-2004 Method for the determination of the proof and the comparative tracking indices of solid insulating materials (IEC 60112:2003)
LST EN IEC 60112:2021 Method for the determination of the proof and the comparative tracking indices of solid insulating materials (IEC 60112:2020)
LST EN 59-2000 Glass reinforced plastics - Measurement of hardness by means of a Barcol impressor
LST EN 60112-2004/A1-2010 Method for the determination of the proof and the comparative tracking indices of solid insulating materials (IEC 60112:2003/A1:2009)

PL-PKN, carbon material trace

PN-EN 60112-2021-07 E Method for the determination of the proof and the comparative tracking indices of solid insulating materials (IEC 60112:2020)
PN C99470-02-1988 Physical and chemical testing methods of photographic materials Determination for resistance of scratches on wet photographic layers

BELST, carbon material trace

STB 2210-2011 Nano-sized carbon and non-carbon materials and composites based on them. Method for determining parameters using scan electron microscopy measurements
STB 2209-2011 Nano-sized carbon and non-carbon materials and composites based on them. The technique for determining elemental composition using scan electron microscopy measurements
STB 995-2011 Carbonic fiber materials URAL. General specifications

United States Navy, carbon material trace

NAVY MIL-P-24583 B-1991 PACKING MATERIAL, GRAPHITIC OR CARBON BRAIDED YARN

FI-SFS, carbon material trace

SFS 501-1972

SAE - SAE International, carbon material trace

SAE AMS3022B-1994 Reference Fluid for Testing Hydrocarbon Fuel Resistant Materials 10% Aromatic Content
SAE AS5729A-2016 O-RING MOLDED FROM AMS7379 (FLUOROCARBON) MATERIAL

Hebei Provincial Standard of the People's Republic of China, carbon material trace

DB13/T 1081.17-2009 Food packaging materials and plastic products - Part 17: Determination of carbonyl chloride content
DB13/T 1708-2013 Carbon Fiber Composite Material Core Aerial Conductor

工业和信息化部, carbon material trace

YS/T 1478-2021 Aluminum-based boron carbide neutron absorbing material

Universal Oil Products Company (UOP), carbon material trace

UOP 899-2004 TRACE HYDROCARBONS IN HYDROGEN, HYDROCARBON GASES, OR LPG BY GC

Jiangsu Provincial Standard of the People's Republic of China, carbon material trace

DB32/T 3595-2019 Elemental analyzer method for the determination of carbon, hydrogen, nitrogen, sulfur and oxygen content in graphene materials

Professional Standard - Petroleum, carbon material trace

SY/T 6585-2003 Carbon fibre composite continuous sucker rod