ZH
RU
ES
Plastic times test
Plastic times test, Total:497 items.
In the international standard classification, Plastic times test involves: Pipeline components and pipelines, Plastics, Raw materials for rubber and plastics, Analytical chemistry, Valves, Rubber and plastics products, Reinforced plastics, Protection against fire, Refractories, Laboratory medicine, Construction materials, Packaging materials and accessories, Products of the chemical industry, Insulating fluids, Rubber, Environmental protection, Cellular materials, Surface treatment and coating, Mechanical testing, Welding, brazing and soldering, External water conveyance systems, External sewage systems, Internal combustion engines for road vehicles, Insulating materials, Equipment for the chemical industry, Wastes, Wood-based panels, Soil quality. Pedology, Cases. Boxes. Crates, Road vehicle systems, Farming and forestry, Bearings, Elements of buildings, Agricultural machines, implements and equipment, Nuclear energy engineering.
British Standards Institution (BSI), Plastic times test
- BS PD CEN/TR 15729:2010 Plastics piping systems —
Glass-reinforced thermosetting
plastics (GRP) based on
unsaturated polyester
resin (UP) — Report on the determination of mean
abrasion after a defined
number of test cycles
- BS 2782 Pt.8 Method 824A:1984 Methods of testing plastics. Other properties. Determination of coefficients of friction of plastics film
- BS EN ISO 4589-2:1999 Plastics - Determination of burning behaviour by oxygen index - Ambient-temperature test
- BS EN ISO 4589-2:1996 Plastics. Determination of burning behaviour by oxygen index. Ambient-temperature test
- BS EN ISO 4589-2:2017 Plastics. Determination of burning behaviour by oxygen index. Ambient-temperature test
- BS 2782-0:2011 Methods of testing plastic. Introduction
- BS EN ISO 10210:2017 Plastics. Methods for the preparation of samples for biodegradation testing of plastic materials
- BS 2782-0:2004 Methods of testing - Plastics - Introduction
- BS ISO 23949:2023 Plastics. Application of spread of flame test to plastic pipes
- BS 2782-3 Method 332A:1976 Methods of testing plastics - Mechanical properties - Stiffness of plastics film
- BS ISO 4589-4:2021 Plastics. Determination of burning behaviour by oxygen index. High gas velocity test
- BS EN 15860:2010 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
- BS ISO 10093:1995 Plastics. Fire tests. Standard ignition sources
- BS ISO 18280:2009 Plastics. Epoxy resins. Test methods
- BS ISO 10093:2020 Plastics. Fire tests. Standard ignition sources
- BS ISO 18280:2010 Plastics. Epoxy resins. Test methods
- BS 2782-11 Method 1101A:1981 Methods of testing plastics - Thermoplastics pipes, fittings and valves - Measurement of dimensions of pipes
- BS 2782-6 Method 621C:1983 Methods of testing plastics - Dimensional properties - Determination of the bulk factor of moulding materials
- BS EN 28659:1992 Thermoplastics valves - Fatigue strength - Test method
- BS EN ISO 8659:2020 Tracked Changes. Thermoplastics valves. Fatigue strength. Test method
- BS EN ISO 20200:2023 Plastics. Determination of the degree of disintegration of plastic materials under composting conditions in a laboratory-scale test
- BS EN ISO 527-2:2012 Plastics. Determination of tensile properties. Test conditions for moulding and extrusion plastics
- BS 2782-3 Method 365A:1976 Methods of testing plastics - Mechanical properties - Determination of softness number of flexible plastics materials
- BS 2782-11 Method 1150E:1997 Methods of testing plastics - Thermoplastics pipes, fittings and valves - Plastics pipes and fittings - Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting
- BS 2782-11 Method 1112A:1989 Methods of testing plastics. Thermoplastics pipes, fittings and valves. Leaktightness of thermoplastics pipes and fittings for non-pressure applications
- BS EN ISO 4589-3:1996 Plastics. Determination of burning behaviour by oxygen index. Elevated temperature test
- BS 2782 Pt.1 Method 115A:1978 Methods of testing plastics. Thermal properties. Plastic yield
- BS EN ISO 7214:2007 Cellular plastics - Polyethylene - Methods of test
- BS EN ISO 10093:1999 Plastics - Fire tests - Standard ignition sources
- BS EN ISO 7214:2012 Cellular plastics. Polyethylene. Methods of test
- BS EN 14995:2006 Plastics - Evaluation of compostability - Test scheme and specifications
- BS EN 14995:2007 Plastics. Evaluation of compostability. Test scheme and specifications
- BS 2782-11 Method 1108A:1989 Methods of testing plastics - Thermoplastics pipes, fittings and valves - True impact rate (TIR) boundaries of pipes
CH-SNV, Plastic times test
Professional Standard - Chemical Industry, Plastic times test
- HG/T 3862-2006 Plastics. Test method of yellowness index
- HG/T 2-163-1965 Plastic low temperature elongation test method
- HG/T 3840-2006 Plastics. Determination of flexural properties by use of small specimens
- HG/T 3841-2006 Plastics. Determination of impact properties by use of small specimens
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Plastic times test
- GB/T 2409-1980 Plastics--Yellow index test method
- GB/T 8324-1987 Test method for bulk factor of moulding materials
- GB/T 2406-1993 Plastics Determination of fammability by oxygen index
- GB/T 3139-2005 Fiber-reinforced plastics composites-Determination of thermal conductivity
- GB/T 3399-1982 Test method for thermal conductivity of plastics by means of the guarded hot plate
- GB/T 31402-2015 Plastics.Measurement of antibacterial activity on plastics surfaces
- GB/T 2572-2005 Fiber-reiforced plastics composites-Determination for mean coefficient of linear expansion
- GB/T 30086-2013 Determination of axial coefficient of linear expansion of plastics pipes for water supply
- GB/T 2913-1982 Test for whiteness of plastics
- GB 2913-1982 Test method for whiteness of plastics
- GB/T 8924-2005 Test method for flammability characteristics of fiber reinforced plastics-Oxygen index method
- GB/T 1034-1998 Plastics--Determination of water absorption
- GB/T 7141-2008 Plastics.Methods of heat aging
- GB/T 3681-2000 Plastics-Test method of exposure to weathering
- GB/T 9341-2000 Plastics--Determination of flexural properties
- GB/T 9342-1988 Plastics--Determination of hardness by the ball indentation method
- GB/T 5478-1985 Test method for wear of plastics by rolling
- GB/T 14483-1993 Test methods for deformation of plastics under load
- GB/T 14484-1993 Test method for bearing strength of plastics
- GB/T 15047-1994 Test method for stiftness proporties in forsion of plastics
- GB/T 1041-1992 Plastics--Determination of compressive properties
- GB/T 1040-1992 Plastics-Determination of tensile properties
- GB/T 2411-1980 Plastics--Shore hardness test
- GB/T 24128-2009 Method for testing resistance of plastics to mold
- GB/T 24127-2009 Testing method for determining algal resistance of plastics
- GB/T 41929-2022 Plastics—Epoxy resins—Test methods
- GB/T 5478-2008 Plastics-Test method for wear by rolling
- GB/T 8807-1988 Test method for specular gloss of plastics
- GB 8807-1988 Plastic Specular Gloss Test Method
- GB/T 14485-1993 Standard methods of testing for impact resistance of plats and pats made from engineering plastic rigid plastics by a ball (falling ball)
- GB/T 1040.2-2006 Plastics. Determination of tensile properties. Part 2: Test conditions for moulding and extrusion plastics
- GB/T 1040.2-2022 Plastics—Determination of tensile properties—Part 2: Test conditions for moulding and extrusion plastics
- GB/T 8924-1988 Test method for flammability characteristics of glass fiber reinforced plastics using the oxygen index method
- GB/T 16419-1996 Plastics--Determination of flexural properties by use of small specimens
- GB/T 16420-1996 Plastics--Determination of impact properties by use of small specimens
- GB/T 16421-1996 Plastics--Determination of tensile properties by use of small specimens
- GB/T 2406.3-2022 Plastics—Determination of burning behaviour by oxygen index—Part 3: Elevated-temperature test
- GB/T 2406.2-2009 Plastics.Determination of burning behaviour by oxygen index.Part 2:Ambient-temperature test
- GB/T 8808-1988 Test method for peel force of flexible laminated plastics
- GB 8808-1988 Peel Test Method for Soft Composite Plastic Materials
- GB/T 31726-2015 Test method for anti-fogging property of plastic film
- GB/T 16276-1996 Test method for blocking of plastic film
- GB/T 1843-1996 Plastics--Determination of izod impact strength
- GB/T 3398-1982 Test for hardness of plastics by the ball indentation
- GB/T 7948-1987 Test method for PV limit of plastics bearings
- GB/T 13541-1992 Test methods of plastic films for electrical purposes
- GB/T 1035-1970 Test method for thermostability of plastics(Martin)
- GB/T 12610-1990 Electroplated coatings on plastics materials--Thermal cycling test
- GB/T 7141-1992 Plastics-Methods of exposure to thermal air
- GB/T 1636-1979 Test method for apparent density of moulding plastic materials
- GB/T 14154-1993 Plastics doors--Vertical load test
- GB 7948-1987 Plastic bearing limit PV test method
HU-MSZT, Plastic times test
American Society for Testing and Materials (ASTM), Plastic times test
- ASTM D1925-70(1988)e1 Test Method for Yellowness Index of Plastics
- ASTM D4350-16(2022) Standard Test Method for Corrosivity Index of Plastics and Fillers
- ASTM D4350-15 Standard Test Method for Corrosivity Index of Plastics and Fillers
- ASTM D864-52(1978) Method of Test for Coefficient of Cubical Thermal Expansion of Plastics
- ASTM D4350-13 Standard Test Method for Corrosivity Index of Plastics and Fillers
- ASTM D4350-16 Standard Test Method for Corrosivity Index of Plastics and Fillers
- ASTM D731-95(1999) Standard Test Method for Molding Index of Thermosetting Molding Powder
- ASTM D4350-00(2005) Standard Test Method for Corrosivity Index of Plastics and Fillers
- ASTM D4350-00 Standard Test Method for Corrosivity Index of Plastics and Fillers
- ASTM D542-14 Standard Test Method for Index of Refraction of Transparent Organic Plastics
- ASTM D542-00 Standard Test Method for Index of Refraction of Transparent Organic Plastics
- ASTM C181-11 Standard Test Method for Workability Index of Fireclay and High-Alumina Refractory Plastics
- ASTM D1003-00 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics
- ASTM D1494-22 Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels
- ASTM D1003-13 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics
- ASTM D1494-17 Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels
- ASTM C181-09 Standard Test Method for Workability Index of Fireclay and High-Alumina Plastic Refractories
- ASTM D1045-08 Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics
- ASTM D1045-14 Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics
- ASTM D618-08 Standard Practice for Conditioning Plastics for Testing
- ASTM D1494-97(2008)e1 Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels
- ASTM D1494-12 Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels
- ASTM D1692-76e1 Standard Method Of Test For Flammability Of Plastic Sheeting And Cellular Plastics
- ASTM D696-98 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between -30176C and 30176C With a Vitreous Silica Dilatometer
- ASTM D747-99 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
- ASTM B553-79(1985) Test Method for Thermal Cycling of Electroplated Plastics
- ASTM D1938-06 Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method
- ASTM D1938-02 Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method
- ASTM D1938-94 Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method
- ASTM D1938-08 Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method
- ASTM D2457-08 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics
- ASTM D2457-08e1 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics
- ASTM D2457-13 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics
Taiwan Provincial Standard of the People's Republic of China, Plastic times test
- CNS 13590-1995 Method of Test for Plastic Flammability - Oxygen Index Method
- CNS 14535-2001 Method of test for flammability of plastic material
- CNS 3235-1971 Method of Test for Fineness of Plastics Powder
- CNS 12111-1987 Method of Test for Workability Index of Fireclay Plstic Refactories
- CNS 13332-1994 Method of Test for Rookwell Hardness of Plastics
- CNS 13786-1996 Method of Test for Brittleness Temperature of Plastics
- CNS 4396-1992 Method of Test for Tensile Properties of Plastics
- CNS 13333-1994 Method of Test for the Density and Specific Gravity of Plastics
- CNS 8910-1994 Method of Test for Accelerated Artificial Exposure of Plastic Building Materials
- CNS 5088-1986 Method of Test for Plastic Limit and Plasticity Index of Soils
IT-UNI, Plastic times test
VN-TCVN, Plastic times test
- TCVN 6148-2007 Thermoplastics pipes.Longitudinal reversion.Test method and parameters
- TCVN 4501-2-2009 Plastics.Determination of tensile propertie.Part 2: Test conditions for moulding and extrusion plastics
RU-GOST R, Plastic times test
PL-PKN, Plastic times test
Danish Standards Foundation, Plastic times test
- DS/EN ISO 2505:2006 Thermoplastics pipes - Longitudinal reversion - Test method and parameters
- DS/EN 28233:2003 Thermoplastics valves - Torque - Test method
- DS/EN 12061:1999 Plastics piping systems - Thermoplastics fittings - Test method for impact resistance
- DS/EN 15860:2010 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
- DS/EN ISO 24998:2009 Plastics laboratory ware - Single-use Petri dishes for microbiological procedures
- DS/INSTA 214:1990 Plastics pipes. Methylenchloride testing of PVC-pipes
- DS/CEN/TS 15223:2008 Plastics piping systems - Validated design parameters of buried thermoplastics piping systems
- DS 10311:1959 Testing of metals. Reverse bend testing of wire. (Determination of number of bends)
- DS/EN ISO 4589-3:1997 Plastics - Determination of burning behavior by oxygen index - Part 3: Elevated-temperature test
- DS/EN 12814-2:2021 Testing of welded joints of thermoplastics semi-finished products – Part 2: Tensile test
- DS/ISO 4589-4:2021 Plastics – Determination of burning behaviour by oxygen index – Part 4: High gas velocity test
- DS/EN 12814-1/AC:2003 Testing of welded joints of thermoplastics semi-finished products - Part 1: Bend test
- DS/EN 12814-1:2000 Testing of welded joints of thermoplastics semi-finished products - Part 1: Bend test
- DS/EN 12814-2:2000 Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test
- DS/EN 12814-4:2001 Testing of welded joints of thermoplastics semi-finished products - Part 4: Peel test
- DS/EN ISO 7214:2012 Cellular plastics - Polyethylene - Methods of test
- DS/EN ISO 10093:1999 Plastics - Fire tests - Standard ignition sources
- DS/EN 14932:2007 Plastics - Stretch thermoplastic films for wrapping bales - Requirements and test methods
International Organization for Standardization (ISO), Plastic times test
- ISO/DIS 2505 Thermoplastics pipes — Longitudinal reversion — Test method and parameters
- ISO 12771:1997 Plastics laboratory ware - Disposable serological pipettes
- ISO 537:1980 Plastics — Testing with the torsion pendulum
- ISO 537:1989 Plastics; testing with the torsion pendulum
- ISO 6601:2002 Plastics - Friction and wear by sliding - Identification of test parameters
- ISO 6601:1987 Plastics; Friction and wear by sliding; Identification of test parameters
- ISO 23949:2023 Plastics — Application of spread of flame test to plastic pipes
- ISO 8233:1988 Thermoplastics valves; torque; test method
- ISO/FDIS 8233:2023 Thermoplastics valves — Torque — Test method
- ISO 12091:1995 Structured-wall thermoplastics pipes - Oven test
- ISO/CD 16636 Plastics — Disintegration field test of plastics under water environmental conditions
- ISO 1209:1976 Rigid cellular plastics — Bending test
- ISO/TR 10093:2017 Plastics - Fire tests - Standard ignition sources
- ISO 18280:2005 Plastics - Epoxy resins - Test methods
- ISO 18280:2010 Plastics - Epoxy resins - Test methods
- ISO 10093:1998 Plastics - Fire tests - Standard ignition sources
- ISO/TR 13883:1995 Plastics - Guide to the writing of test methods
- ISO 10093:2020 Plastics - Fire tests - Standard ignition sources
- ISO/TR 10093:2018 Plastics - Fire tests - Standard ignition sources
- ISO 844:1978 Cellular plastics; Compression test of rigid materials
- ISO 8659:1989 Thermoplastics valves; fatigue strength; test method
- ISO 8659:2020 Thermoplastics valves — Fatigue strength — Test method
- ISO 175:1999 Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals
- ISO 20819-2:2023 Plastics — Wood-plastic recycled composites (WPRC) — Part 2: Test methods
- ISO/PRF 20200:2023 Plastics — Determination of the degree of disintegration of plastic materials under composting conditions in a laboratory-scale test
- ISO 20200:2023 Plastics — Determination of the degree of disintegration of plastic materials under composting conditions in a laboratory-scale test
- ISO 4589-2:2017 Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test
- ISO 4589-2:1996 Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test
- ISO 4589-3:1996 Plastics - Determination of burning behaviour by oxygen index - Part 3: Elevated-temperature test
- ISO 4589-3:2017 Plastics - Determination of burning behaviour by oxygen index - Part 3: Elevated-temperature test
- ISO 7214:2007 Cellular plastics - Polyethylene - Methods of test
- ISO 7214:2012 Cellular plastics - Polyethylene - Methods of test
- ISO 7214:1985 Cellular plastics; Polyethylene; Methods of test
ES-UNE, Plastic times test
- ISO 2505:2023 Thermoplastics pipes — Longitudinal reversion — Test method and parameters
- UNE-CEN/TS 15223:2017 Plastics piping systems - Validated design parameters of buried thermoplastics piping systems (Endorsed by Asociación Española de Normalización in January of 2018.)
Association Francaise de Normalisation, Plastic times test
German Institute for Standardization, Plastic times test
- DIN 53752:1980 Testing of plastics; determination of the coefficient of linear thermal expansion
- DIN EN ISO 4589-3:1996 Plastics - Determination of burning behaviour by oxygen index - Part 3: Elevated-temperature test (ISO 4589-3:1996); German version EN ISO 4589-3:1996
- DIN 16726:2011 Plastic sheets.Testing
- DIN 53455:1981 Testing of plastics; Tensile test
- DIN 53457:1987 Testing of plastics; determination of the elastic modulus by tensile, compression and bend testing
- DIN 53357:1982 Testing of plastics sheets; adhesion test
- DIN 53373:1970 Testing of Plastic Films; Impact Penetration Test with Electronic Data Recording
- DIN 53746:1990 Testing of plastics; proof of polyamides
- DIN 53453:1975 Testing of Plastics; Impact Flexural Test
- DIN 52348:1985-02 Testing of glass and plastics; abraison test; sand trickling method
- DIN 53430:1975 Testing of Rigid Cellular Materials; Tensile Test
- DIN EN 15860:2018 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
- DIN 12693:2002-02 Plastics laboratory ware - Disposable micropipettes adjusted on "In"
- DIN 53499:1974 Testing of plastics; boiling test of moulded articles made of thermosetting moulding materials
- DIN 53435:2018 Testing of plastics - Bending test and impact test on dynstat test specimens
- DIN 53435:1983 Testing of plastics; bending test and impact test on dynstat test pieces
- DIN CEN/TS 15223:2018-01*DIN SPEC 16823:2018-01 Plastics piping systems - Validated design parameters of buried thermoplastics piping systems; German version CEN/TS 15223:2017
- DIN EN 28233:1991 Thermoplastics valves; torques; test method (ISO 8233:1988); german version EN 28233:1990
- DIN EN 12814-2:2021-08 Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test; German version EN 12814-2:2021
- DIN EN 14995:2007 Plastics - Evaluation of compostability - Test scheme and specifications; English version of DIN EN 14995:2007-03
- DIN EN ISO 24998:2009-03 Plastics laboratory ware - Single-use Petri dishes for microbiological procedures (ISO 24998:2008); German version EN ISO 24998:2008
- DIN 54800:1979 Testing of plastics; preparation of polyvinyl chloride (PVC) pastes for testing purposes
- DIN EN ISO 2505:2005-08 Thermoplastics pipes - Longitudinal reversion - Test methods and parameters (ISO 2505:2005); German version EN ISO 2505:2005 / Note: To be replaced by DIN EN ISO 2505 (2021-07).
- DIN EN 12814-1:1999 Testing of welded joints of thermoplastics semi-finished products - Part 1: Bend test; German version EN 12814-1:1999
- DIN EN 12814-4:2018-08 Testing of welded joints of thermoplastics semi-finished products - Part 4: Peel test; German version EN 12814-4:2018+AC:2018
- DIN EN ISO 7214:2007 Cellular plastics - Polyethylene - Methods of test (ISO 7214:2007); German version EN ISO 7214:2007
- DIN EN ISO 10093:1999 Plastics - Fire tests - Standard ignition sources (ISO 10093:1998); German version EN ISO 10093:1998
Korean Agency for Technology and Standards (KATS), Plastic times test
Japanese Industrial Standards Committee (JISC), Plastic times test
- JIS R 2574:1991 Testing method for workability index of fireclay plastic
- JIS K 7103:1977 Testing methods for yellowness index and change of yellowness index of plastics
- JIS K 7152:1995 Plastics -- Injection moulding of test specimens of thermoplastic materials
- JIS K 7125:1987 Testing method for static and kinetic coefficients of friction of plastic film and sheeting
- JIS K 6269 AMD 1:2011 Testing method of flammability using the oxygen index method for rubber, vulcanized or thermoplastic (Amendment 1)
- JIS K 7151:1995 Plastics -- Compression moulding test specimens of thermoplastic materials
- JIS K 6814:2008 Thermoplastics pipes -- Thermal reversion test method
- JIS K 7195:1993 Testing method for heat sag of plastics
- JIS K 7208:1995 Testing method for compressive properties of plastics
- JIS K 7206:1991 Testing method for Vicat softening temperature of thermoplastics
- JIS K 7342:2007 Plastics -- Fire tests -- Standard ignition sources
- JIS K 7147:2008 Plastics -- Epoxy resins -- Test methods
- JIS K 7115:1986 Testing method for tensile creep of plastics
- JIS K 7116:1987 Testing method for flexural creep of plastics
- JIS K 6911:1995 Testing methods for thermosetting plastics
- JIS K 7202:1995 Method of rockwell hardness test for plastics
- JIS K 7113:1995 Testing method for tensile properties of plastics
- JIS K 7201-2:1999 Plastics -- Determination of burning behaviour by oxygen index -- Part 2: Ambient-temperature test
- JIS K 7201-3:2021 Plastics -- Determination of burning behaviour by oxygen index -- Part 3: Elevated-temperature test
- JIS K 7220:1999 Cellular plastics -- Compression test for rigid materials
- JIS K 6949:2015 Plastics -- Methods for the preparation of samples for biodegradation testing of plastic materials
- JIS B 7756:1993 Impact testing machines for plastic materials -- Instrumentation
- JIS K 6767:1999 Cellular plastics -- Polyethylene -- Methods of test
未注明发布机构, Plastic times test
AT-ON, Plastic times test
International Federation of Trucks and Engines, Plastic times test
SG-SPRING SG, Plastic times test
- SS 323-C5-2013 Methods of test for flexible plastic packaging materials.Part C5: Standard test method for static and kinetic coefficients of friction of plastic film and sheeting
- SS 323-C1-2013 Methods of test for flexible plastic packaging materials.Part C1: Standard test method for tensile properties of thin plastic sheeting
Professional Standard - Commodity Inspection, Plastic times test
- SN/T 0964-2000 Rules for the inspection of once using plastic bags for human blood and blood components for import and export
GM North America, Plastic times test
FI-SFS, Plastic times test
- SFS 3143 S-1975 Muoviputket. Kuormituskoe
- SFS 3448 E-1981 In case of interpretation disputes the Finnish version applies. Date of translation 1986-08-18
GM Daewoo, Plastic times test
Professional Standard - Ferrous Metallurgy, Plastic times test
- YB/T 5119-1993 Test method for workability index of fireclay and high alumina plastic refractories
European Committee for Standardization (CEN), Plastic times test
- prEN ISO 2505:2021 Thermoplastics pipes - Longitudinal reversion - Test method and parameters (ISO/DIS 2505:2021)
- prEN ISO 2505 Thermoplastics pipes - Longitudinal reversion - Test method and parameters (ISO/DIS 2505:2021)
- EN ISO 3167:1996 Plastics - Multipurpose-Test Specimens ISO 3167: 1993
- EN ISO 3167:2014 Plastics - Multipurpose test specimens (ISO 3167:2014)
- EN 28233:1990 Thermoplastics Valves - Torque - Test Method
- EN ISO 4589-3:2017 Plastics - Determination of burning behaviour by oxygen index - Part 3: Elevated-temperature test
- EN ISO 8659:2020 Thermoplastics valves - Fatigue strength - Test method (ISO 8659:2020)
- EN 14995:2006 Plastics - Evaluation of compostability - Test scheme and specifications
- EN ISO 3167:2003 Plastics - Multipurpose Test Specimens ISO 3167: 2002
- EN ISO 4589-2:2017 Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test
- EN 12814-2:2000 Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test
- EN 12814-2:2021 Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test
- EN ISO 7214:2000 Cellular Plastics - Polyethylene - Methods of Test ISO 7217:1998
CZ-CSN, Plastic times test
BE-NBN, Plastic times test
(U.S.) Ford Automotive Standards, Plastic times test
GM Global, Plastic times test
- GMW 15283-2011 Cycle - Immersion Corrosion Test for Stainless Steel Molding Materials Issue 2; English
Standard Association of Australia （SAA）, Plastic times test
- AS 4828.4:2008 Degradability of plastics - Methods of test - Test method for heat aging of degradable plastics
- AS 1146.3:1990 Methods for impact tests on plastics - Calibration of the testing machine
- AS 4828.2:2008 Degradability of plastics - Methods of test - Determination of brittle point in plastic film using a tensile elongation test
Professional Standard - Petrochemical Industry, Plastic times test
Lithuanian Standards Office , Plastic times test
- LST EN 12061-2002 Plastics piping systems - Thermoplastics fittings - Test method for impact resistance
- LST EN 15860-2010 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
- LST EN 12814-1-2001 Testing of welded joints of thermoplastics semi-finished products - Part 1: Bend test
- LST EN 12814-4-2002 Testing of welded joints of thermoplastics semi-finished products - Part 4: Peel test
- LST EN 12814-2-2000 Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test
- LST EN 12814-1-2001/AC-2004 Testing of welded joints of thermoplastics semi-finished products - Part 1: Bend test
- LST EN 12814-2-2021 Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test
- LST EN 14932-2007 Plastics - Stretch thermoplastic films for wrapping bales - Requirements and test methods
AENOR, Plastic times test
- UNE-EN 15860:2011 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
- UNE-EN 12061:1999 Plastics piping systems - Thermoplastics fittings - Test method for impact resistance
- UNE-EN 12814-4:2002 Testing of welded joints of thermoplastics semi-finished products - Part 4: Peel test.
- UNE-EN 12814-2:2001 Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test.
- UNE-EN 14932:2007 Plastics - Stretch thermoplastic films for wrapping bales - Requirements and test methods
国家市场监督管理总局、中国国家标准化管理委员会, Plastic times test
- GB/T 40933-2021 Plastics—Film and sheeting—Guidance on the testing of thermoplastic films
- GB/T 40872-2021 Plastics—Test methods of polyethylene cellular
NL-NEN, Plastic times test
PT-IPQ, Plastic times test
SE-SIS, Plastic times test
American Gear Manufacturers Association, Plastic times test
工业和信息化部/国家能源局, Plastic times test
Association of German Mechanical Engineers, Plastic times test
- DVS 2203-2-1985 Testing of welded joints of thermoplastics; tensile test
- DVS 2203-4-1985
- DVS 2203-3-1985 Testing of welded joints of thermoplastics; tensile impact test
- DVS 2203-5-1999 Testing of welded joints ofthermoplastics plates and tubes - Technological bend test
- DVS 2203-1 Beiblatt 1-2003 Testing of welded joints of thermoplastics sheet and pipes - Requirements - Tensile test
- DVS 2203-1-2003 Testing of welded joints of thermoplastics sheet and pipes - Test methods - Requirements
- DVS 2203-4-1997 Testing of welded joints of thermoplastics plates and tubes - Tensible creep test
CEN - European Committee for Standardization, Plastic times test
- PD CEN/TS 15223:2017 Plastics piping systems - Validated design parameters of buried thermoplastics piping systems
- EN ISO 4589-2:1999 Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (Incorporates Amendment A1: 2006)
- PREN 12814-2-2019 Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test
- EN ISO 7214:2007 Cellular Plastics - Polyethylene - Methods of Test
Professional Standard - Agriculture, Plastic times test
- GB/T 1633-1979 Test method for softening point (Vicat) of thermoplastics
Professional Standard - Machinery, Plastic times test
JSAE - Society of Automotive Engineers of Japan@ Inc., Plastic times test
American National Standards Institute （ANSI), Plastic times test
Indonesia Standards, Plastic times test
- SNI 15-4761-1998 Test method for workability index of plastic refractory materials
工业和信息化部, Plastic times test
- HG/T 3216-2018 Test method for heat deformation resistance of plastic tower packing
Military Standard of the People's Republic of China-General Armament Department, Plastic times test
- GJB 10276-2021 Test methods for identification of ship secondary shielding materials
Guangdong Provincial Standard of the People's Republic of China, Plastic times test
SK-STN, Plastic times test
- STN 63 5205-1985 Testing of rubber and plastic hoses. Testing by dynamic overpressure test
Society of Automotive Engineers (SAE), Plastic times test
- SAE J323-2009 Test Method for Determining Cold Cracking of Flexible Plastic Materials
SAE - SAE International, Plastic times test
- SAE J323-1996 Test Method for Determining Cold Cracking of Flexible Plastic Materials
- SAE J323-1998 Test Method for Determining Cold Cracking of Flexible Plastic Materials
Professional Standard - Light Industry, Plastic times test
IN-BIS, Plastic times test
AWS - American Welding Society, Plastic times test
- G1.2M/G1.2-1999 Specification for Standardized Ultrasonic Welding Test Specimen for Thermoplastics
Professional Standard - Nuclear Industry, Plastic times test
Professional Standard - Energy, Plastic times test
国家能源局, Plastic times test
- NB/T 20434-2017 First charging test of pressurized water reactor nuclear power plant reactor
Professional Standard - Electron, Plastic times test
- SJ 3196-1989 Test methods for transmitting coefficient of secondary electron of electronic materials