ZH
RU
ES

b low density polyethylene

b low density polyethylene, Total:500 items.

In the international standard classification, b low density polyethylene involves: Plastics, Rubber and plastics products, Textile fibres, Pharmaceutics, Surface treatment and coating, Sacks. Bags, Pipeline components and pipelines, Products of the chemical industry, Buildings, Packaging materials and accessories, Vocabularies, Insulation, Electrical accessories, Valves, Flexible drives and transmissions, Fibre optic communications, Analytical chemistry, Materials for aerospace construction, Installations in buildings, Power stations in general, Fishing and fish breeding, Agricultural machines, implements and equipment, Bridge construction, Construction materials, Small craft, Insulating fluids, Insulating materials, Earthworks. Excavations. Foundation construction. Underground works, Lubrication systems, Water quality, PACKAGING AND DISTRIBUTION OF GOODS, Solar energy engineering, Organic chemicals, Electrical wires and cables, Terminology (principles and coordination), Aerospace fluid systems and components, Road engineering, Seals, glands, Products of the textile industry.

GM Daewoo, b low density polyethylene

GMKOREA EDS-M-4101-2012 Low Density Polyethylene
GMKOREA EDS-M-4151-2013

RO-ASRO, b low density polyethylene

STAS 8171-1984 LOW DENSITY POLYETH YLENIC FOILS
STAS 8179/3-1975 LOW-DENSITY POLYETHYLENE GRANULESMethods of analysis
STAS 10971-1987 Plasties packaging LOW DENSITY POLYETHYLENE SHEET PACKAGINGS
STAS 8179/2-1975 Low-density polyethylene granules General technical reauirements for quality
STAS 12633-1988 GRAINED HIGH DENSITY POLYETHYLENE
STAS 10617/2-1984 HIGH-DENSITY POLYETHYLENE PIPES Dimensions
STAS 10617/4-1976 HIGH-DENSITY POLYETHYLENE PIPES Methods for the inspection of dimensions
SR ISO 4451:1995 Polyethylene (PE) pipes and fittings - Determination of reference density of uncoloured and black polyethylenes
SR ISO 4451/C 1:1996 Polyethylene (PE) pipes and fittings - Determination of reference density of uncoloured and black polyethylenes
STAS SR ISO 7258:1996 Polytetrafluoroethylene (PTFE) tubing for aerospace aplications Methods for determination of the density and relative density

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, b low density polyethylene

GB 11115-1989 Low density polyethylene resin
GB/T 15182-1994 Linear low density polyethylene resin
GB/T 10005-1998 Biaxially oriented polypropylene laminated polyethylene (BOPP/LDPE) films and pouches
GB 11116-1989 High density polyethylene resin
GB/T 24456-2009 High-density polyethylene silicore plastic duct
GB/T 12025-1989 High density polyethylene blow film
GB/T 20022-2005 Plastics.Homopolymer and copolymer resins of vinyl chloride.Determination of apparent density
GB/T 9642-1988 Polyethylene (PE) pipes and fittings--Designation of polyethylene, based on nominal density and melt flow rate
GB/T 23652-2009 Plastics-PVC resins.Determination of compacted apparent bulk density

GM Europe, b low density polyethylene

GME QK 000096-1983 Poly鋞hylen niedriger Dichte Polyethylene Low Density German
GME QK 000012-1983 Polyethylen niedriger Dichte Polyethylene Low Density German
GME QK 000014-1983 Polyethylen niedriger Dichte Polyethylene Low Density German
GME QK 000016-1983 Polyethylen niedriger Dichte Polyethylene Low Density German
GME QK 000017-1983 Polyethylen niedriger Dichte Polyethylene Low Density German
GME QK 000020-1983 Polyethylen niedriger Dichte Polyethylene Low Density Germa
GME QK 001009-1983 Polyethylen niederer Dichte Polyethylene Low Density German
GME QK 001023-1986 Polyethylen niedriger Dichte Polyethylene Low Density German
GME QK 004700-1988 Polyethylene Low Density (German)
GME QK 000011-1983 Polyethylen niedriger Dichte Polyethylene Low Density German [Replaced: GME QK 000013]
GME QK 000018-1983 Polyethylen niedriger Dichte Polyethylene Low Density German [Replaced: GME QK 000015]
GME STD 518367-2001 Plastics 8367 PELD Low density Plast 8367 PELD L錱 densitet English/Swedish
GME STD 518402-2001 Plastic 8402 PELD Low density Plast 8402 PELD L錱densitet English/Swedish
GME STD 518867-2000 Plastic 8867 PELD Plast 8867 PELD English/Swedish
GME QK 000078-1983 Poly鋞hylen hoher Dichte Polyethylene High Density German
GME QK 000084-1983 Poly鋞hylen hoher Dichte Polyethylene High Density German
GME QK 000091-1983 Poly鋞hylen hoher Dichte Polyethylene High Density German
GME QK 000008-1983 Polyethylen mittlerer Dichte Polyethylene Middle Density German
GME QK 000021-1983 Polyethylen mittlerer Dichte Polyethylene Middle Density German
GME QK 000022-1983 Polyethylen mittlerer Dichte Polyethylene Middle Density German
GME QK 000072-1983 Polyethylen hoher Dichte Polyethylene High Density German
GME QK 000073-1983 Polyethylen hoher Dichte Polyethylene High Density German
GME QK 000075-1983 Poly鋞hylen hoher Dichte Polyethylene High Density German
GME QK 001008-1983 Polyethylen hoher Dichte Polyethylene High Density German
GME QK 001010-1983 Poly鋞hylen hoher Dichte Polyethylene High Density German
GME QK 000087-2005 High-Density Polyethylene (English/German)
GME QK 000010-1983 Polyethylen mittlerer Dichte, schwarz Polyethylene Middle Density, Black German
GME QK 000063-1983 Polyethylen hoher Dichte, gelb Polyethylene High Density, Yellow German
GME QK 000077-1983 Poly鋞hylen hoher Dichte, schwarz Polyethylene High Density, Black German
GME QK 000996-2005
GME QK 001021-1984 Polyethylen mittlerer Dichte Polyethylene Middle Density German
GME QK 001024-2005 High-Density Polyethylene (English/German)
GME QK 001077-1997 Polyethylen hoher Dichte Polyethylene High Density English/German
GME QK 001081-2004 Polyethylene, High Density (English/German)
GME QK 001082-1997 Polyethylen hoher Dichte Polyethylene High Density English/German
GME QK 001088-2005
GME QK 001094-2000 Polyethylene with High Density (English/German)
GME QK 005100-1984 Polyethylene High Density (German)
GME QK 004900-1984 Polyethylene Middle Density (German)
GME QK 000027-1983 Polyethylen mittlerer Dichte Polyethylene Middle Density German [Replaced: GME QK 000006]
GME QK 000067-1983 Polyethylen mittlerer Dichte Polyethylene Middle Density German [Replaced: GME QK 000007]
GME QK 000972-2010 High Density Polyethylene (English/German; Issue 1)
GME STD 518942-2001 Plastic 8942 PEHD Plast 8942 PEHD English/Swedish
GME STD 518258-2001 Plastic 8258 PEHD High density Plast 8258 PEHD H鰃 densitet English/Swedish
GME QK 001019-1983 Polyethylen hoher Dichte mit 20 Massenanteil in % Glasfasern Polyethylene High Density with 20 % by Mass Glass Fibre German
GME STD 518660-1996 Cellular plastic 8660 PEX Foamed, crosslinked PELD with closed cells Cellplast 8660 PEX Skummad, tv鋜bunden PELD med slutna celler English/Swedish
GME QK 000079-1983 Poly鋞hylen hoher Dichte Polyethylene High Density German [Replaced: GME QK 000065, GME QK 000076, GME QK 000085]
GME QK 000069-2006
GME QK 000093-1988 Polyethylen hoher Dichte High Density Polyethylene English/German [Replaced: GME QK 000025, GME QK 000071, GME QK 000074]

CZ-CSN, b low density polyethylene

CSN 64 3016-1976 Low density polyethylene for pipes
CSN 64 3011-1973 Low density polyethylene for cables
CSN 64 3013-1973 Low density polyethylene for f ilms
CSN 64 3010-1973 Low density polyethylene. General requirements
CSN 64 3019-1979 Low density polyethyle-ne for speciál purposes
CSN 64 3012-1973 Low density polyethylene for injectioii and eompreasion moulding
CSN 13 8750-1971 Fittings for pipes from low and high density polyethylen (up to 10 kp/cm2)
CSN 64 6014-1983 Heat shrinkable film from low density olyethylene for packaging echnical requirements
CSN 05 6816-1983 Welding of pipes and f ittings of high den-sity polyethylene
CSN 38 6415-1980 Gas-pipe lines and gas service pipes of high density polyethylene

Professional Standard - Pharmaceutical Packaging, b low density polyethylene

YBB 0001-2002 Dimidujuyixi Shuye Ping LDPE Infusion Bottles
YBB 0007-2005 LDPF films and pouches for medical Packaging
YBB 0023-2005 PVC/LDPE Composite sheet for Solid Pharmaceutical Packaging
YBB 0001(02)-2002 Low-density polyethylene infusion bottle (trial)
YBB 0023(02)-2002 Polyvinyl chloride/low density polyethylene solid pharmaceutical composite tablet (trial)
YBB 0006-2002 Dimidujuyixi Yaoyong Diyanji ping LDPE Bottles for Eye Drops
YBB 0006(02)-2002 Low-density polyethylene medicinal eye drops bottle (trial)
YBB 0018-2002 Juzhi/DimiduJuyixiYaopinbaozhuangyong Fuhemo、Dai Laminated Films and Pouches (PET/LDPE) for Pharmaceutical Packaging
YBB 0019-2002 ShuangxianglashenJubingxi/DimidujuyixiYaopinbaozhuangyong Fuhemo、Dai Laminated Films and Pouches (BOPP/LDPE) for Pharmaceutical Packaging
YBB 0018(02)-2002 Polyester/low-density polyethylene composite film and bag for pharmaceutical packaging (trial implementation)
YBB 0019(02)-2002 Biaxially oriented polypropylene/low-density polyethylene composite film and bag for pharmaceutical packaging (trial implementation)
YBB 0017-2004 LDPE Bottle Caps with Drying agent for Oral Solid Preparation
YBB 0009-2002 Koufuyeti Yaoyong Gaomidujuyixi Ping HDPE Bottles for Oral liquid Preparation
YBB 0039-2003 Waiyongyeti Yaoyong Gaomidujuyixi Ping HDPE Bottles for external use
YBB 0009(02)-2002 High-density polyethylene bottle for oral liquid medicine (trial)
YBB 0012(02)-2002 Oral solid medicinal high-density polyethylene bottle (trial)
YBB 0039(03)-2003 High-density polyethylene bottle for external liquid medicine (trial)

PL-PKN, b low density polyethylene

PN C89286-61-1989 Polyethylene Iow density PE, MGNX, 14 — D400
PN C89286-07-1989 Polyethylene Iow density PE, FGNX, 18 — D003
PN C89286-08-1989 Polyethylene Iow density PE, FGAN, 18 — D003
PN C89286-09-1989 Polyethylene Iow density PE, FGAL, 18-D003
PN C89286-10-1989 Polyethylene Iow density PE, FGNX, 23 — D006
PN C89286-11-1989 Polyethylene Iow density PE, FGCX, 23 — D006
PN C89286-12-1989 Polyethylene Iow density PE, FPGA, 18 — T012
PN C89286-13-1989 Polyethylene Iow density PE, FGAN, 23 — D022
PN C89286-14-1989 Polyethylene Iow density PE, FGNX, 23 — D022
PN C89286-15-1989 Polyethylene Iow density PE, FGCN, 23 — D022
PN C89286-16-1989 Polyethylene Iow density PE FABS, 23 — D022
PN C89286-26-1989 Polyethylene Iow density PE, GGNX, 18 — D003
PN C89286-27-1989 Polyethylene Iow density PE, GGAN, 18 — D003
PN C89286-28-1989 Polyethylene Iow density PE, GGNX, 23 — DOOó
PN C89286-29-1989 Polyethylene Iow density PE, GGCX, 23 — DOO?
PN C89286-30-1989 Polyethylene Iow density PE, GGNX, 23 — D022
PN C89286-31-1989 Polyethylene Iow density PE, GGCX, 23 — D022
PN C89286-43-1989 Polyethylene Iow density PE, HGNX, 18 — DOW
PN C89286-55-1989 Polyethylene Iow density PE, MGNX, 18 — D003
PN C89286-56-1989 Polyethylene Iow density PE, MGNX, 23 — DOO6
PN C89286-57-1989 Polyethylene Iow density PE, MGCX, 23 — DOO6
PN C89286-58-1989 Polyethylene Iow density PE, MGNX, 23 — D022
PN C89286-59-1989 Polietylen ma?ej g?sto?ci PE, MGCX, 23 — D022
PN C89286-60-1989 Polyethylene Iow density PE, MGNX, 18 — DO90
PN C89286-62-1989 Polyethylene Iow density PE, MGCX, 14 — D400
PN C89286-01-1989 Polyethylene Iow density General regulations
PN C89286-05-1989 Polyethylene Iow density Methods of testing
PN C89286-06-1989 Polyethylene Iow density General specifications
PN C89286-02-1989 Polyethylene Iow density Classification and designation
PN C89286-03-1989 Polyethylene Iow density Packing, starage and transport
PN C89286-04-1989 Polyethylene Iow densffy Sampling and sample preparation for testing
PN C89291 ArkusZ18-1972 Polyvinyl chloride resins Determination of ?he compacted apparen? bulk densi?y
PN C89298-1990 Polystyrene expandable Determination of bulk density of peades after expansion

Group Standards of the People's Republic of China, b low density polyethylene

T/JSBC 2-2020 Recycled low density polyethylene compound
T/ZZB 1957-2020 Low line density ultra-high molecular weight polyethylene filament yarns
T/CSG 001-2020 Low density polyethylene material for manufacture of medical packaging
T/JGWS 2-2019 Recycled high density polyethylene compound
T/WJGY 007-2021 High Density Polyethylene (HDPE) Cable Conduit
T/WJGY 008-2021 High-density polyethylene (HDPE) flame-retardant sub-pipe
T/GDID 1044-2022 Electric cable conduits of high density polyethylene (HDPE)
T/YNSX 9-2020 High Molecular Weight High Density Polyethylene (HMWHDPE) Inspection Well
T/YNSX 009-2022 High Molecular Weight High Density Polyethylene (HMWHDPE) Inspection Well
T/CPCIF 0060-2020 Ultra-high molecular weight polyethylene (PE-UHMW) and high-density polyethylene (PE-HD) for wet process lithium ion battery separator
T/GMALDDC 01-2021 Geosynthetics high density Polyethylene geomembrane
T/GZHG 002-2020 Nano-modified high-density polyethylene (MUHDPE) alloy drainage pipe
T/YNSX 5-2020 High Molecular Weight High Density Polyethylene (HMWHDPE) Double Wall Corrugated Pipe
T/GZHG 013-2022 Nano-modified high-density polyethylene (MUHDPE) alloy drainage pipe
T/GDKJ 0039-2023 High density polyethylene (HDPE) double-wave structure wall pipes for underground usage
T/YNSX 005-2022 High molecular weight high density polyethylene (HMWHDPE) double wall corrugated pipe
T/JGWS 8-2023 Reinforced high-density polyethylene hexagonal structural wall corrugated pipe
T/CECS 10114-2021 Reinforced high-density polyethylene (HDPE-IW) hexagonal structure wall pipe
T/GDC 42-2020 Modified high-density polyethylene (HDPE-IW) hexagonal structure wall pipe
T/YNSX 1-2020 High-density polyethylene (HDPE) two-color composite steady-state pipe for water supply
T/CPIA 0016-2019 High-density polyethylene floating body for photovoltaic power generation system on water
T/SHPTA 044-2023 Environmentally friendly modified MDPE sheath material for optical and power cables
T/GDC 242-2023 Modified High Density Polyethylene (Ds PE) Double Order Peak Enhancement Tube
T/SGX 009-2021 High density polyethylene (HDPE) plastic pipes for buried power cables
T/GDC 30-2022 Nano-modified high-density polyethylene (MUHDPE) double-wall corrugated alloy pipe
T/CECS 10022-2019 Modified high-density polyethylene (HDPE-M) double-wall corrugated pipe for buried
T/CECS 10022-2021 Modified high-density polyethylene (HDPE-M) double-wall corrugated pipe for buried
T/CASMES 149-2023 Reinforced high-density polyethylene (HDPE-HM) sewage pipes for zero-carbon burial
T/YNSX 003-2022 High molecular weight high density polyethylene (HMWHDPE) hollow structural wall composite pipe
T/ZZB 1175-2019 Single forming hot plug type high density polyethylene hollow winding tube
T/GDC 25-2019 Throttling standard parts connected to high-density polyethylene (HDPE) winding reinforced pipe
T/CECS 10211-2022 High-density polyethylene composite pipe fittings reinforced with electro-fused steel skeleton for water supply
T/GZHG 030-2022 Anhydrous phosphogypsum modified high-density polyethylene double-wall corrugated drainage pipe
T/CSCM 02-2020 Inorganic whisker reinforced high density polyethylene (HDPE-IW) hexagonal structural pipes
T/CNPPA 2001-2017 HDPE Non-woven Fabrics Desiccant Sachet for Oral Solid Preparation
T/CNPPA 2004-2017 HDPE Non-woven Fabrics Iron Based Oxygen Absorbent Sachet for Infusion
T/CNPPA 2002-2017 HDPE Non-woven Fabrics Active Carbon Sachet for Oral Solid Preparation
T/YNSX 6-2020 High Molecular Weight High Density Polyethylene (HMWHDPE) Double Wave Wound Structural Wall Pipe
T/YNSX 3-2020 High molecular weight high density polyethylene (HMWHDPE) hollow winding structure wall composite pipe
T/GZHG 024-2022 Nano-modified high-density polyethylene (MUHDPE) double-peak reinforced buried drainage pipe
T/YNSX 010-2022 Large diameter high molecular weight high density polyethylene (HMWHDPE) plastic steel wound drainage pipe

IN-BIS, b low density polyethylene

IS 2508-1984
IS 3076-1985
IS 3395-1984
IS 9698-1980
IS 10692-1983
IS 10889-1984
IS 5322-1988
IS 11651-1986
IS 6192-1984
IS 7903-1984
IS 10054-1981
IS 11584-1986
IS 6193-1971
IS 9755-1989
IS 10840-1994 Blow moulded hdpe containers for packing of vanaspati - specification
IS 8303-1977
IS 8069-1989
IS 12100-1987
IS 6899-1973
IS 8069 Pt.1-1981

GM North America, b low density polyethylene

GM GMP.PE.052-1990 Polyethylene - Low Density, Homopolymer, Extrusion Grade
GM GMP.PE.053-1990 Polyethylene - Low Density, Homopolymer, Injection Molding Grade
GM GMP.PE.064-1998 Polyethylene Low Density, Extrusion Grade
GM GMP.PE.059-1990 Polyethylene - Medium Density Polyethylene
GM GMP.PE.009-1991 Polyethylene - High Density
GM GMP.PE.015-1994 Polyethylene - Linear Low Density, Low Gloss, Blow Molding Grade
GM GMP.PE.011-2003 Polyethylene-High Density, Homopolymer
GM GMP.UP.006-1994 Vinylester SMC - Low Density
GM GMP.PE.063-1991 Polyethylene - Low Density, Homopolymer, Inj. Molded, UV Stable
GM GMP.PE.012-1997 Polyethylene - Low Density, UV Stabilized, Blow Molding Grade (Revision B)
GM GMP.PE.003-2001 Polyethylene - High Density, Extrusion Grade, Copolymer
GM GMP.PE.061-1990 Polyethylene - High Density, HMW, Blow Molding, Copolymer
GM GMP.PE.050-1991 Polyethylene - High Density, High Molecular Weight
GM GMP.PE.062-2001 Polyethylene - High Density, High Molecular Weight
GM GMP.PE.008-1998 Polyethylene - High Density, Copolymer, Injection Molding (Revision B)
GM GMP.PE.005-1988 Polyethylene - High Density, Copolymer, Injection Molding Grade, Pellet Form
GM GMP.PE.060-1992 Polyethylene - High Density, Stress Crack Resistant, Blow Molding
GM GMP.PE.058-1998 Polyethylene - Medium Density, UV Stable, Injection Molding Grade
GM GMP.PE.006-1988 Polyethylene - High Density, Copolymer, Injection Molding Grade, Pellet Form
GM GMP.PE.004-1988 Polyethylene - High Density, Copolymer, Blow Molding/Extrusion Grade, Pellet Form
GM GMP.PE.013-1991 Polyethylene - Medium Density, UV Stabilized, Blow Molding Grade
GM GMP.PE.021-2003 Polyethylene (PE) High Density, Conductive, Blow Moldable, ASTM Tests
GM GMP.PE.007-1996 Polyethylene - High Density, Copolymer, Sheet Extrusion/ Thermoforming, Pellet Form
GM GMP.PE.017-2003 Polyethylene 25% Filled, High Density, Sheet Extrudable, Blow Moldable, Homopolymer
GM GMP.PE.002-1988 Polyethylene - High Density, 25% Mica Filled, Chemically Coupled, Blow Moldable,Homopolymer
GM GMP.PE.010-1989 Polyethylene - High Density, 20% Mica Filled, Chemically Coupled, Blow Moldable Homopolymer
GM GMP.PE.014-2001 Polyethylene - High Density, Stress Crack Resistant, Injection Molding Grade (Revision A)
GM GMP.PE.018-1998 Polyethylene - 20% Glass Filled, Chemically Coupled, High Density, Injection Molding Grade

Professional Standard - Light Industry, b low density polyethylene

QB/T 1930-2006 Low density polyethylene pipes for water supply
QB/T 3803-1999 Low density polyethylene (LDPE) pipes for sprinkler irrigation
QB/T 1930-1993 Low-density polyethylene (LDPE LLDPE) pipes for water supply
QB/T 2356-1998 HDPE monofilament
QB/T 1871-1993 Biaxially stretched nylon (BONY)/low-density polyethylene (LDPE) composite film, bag
QB/T 4635-2014 Biaxially oriented polyamide (BOPA) and low density polyethylene (PE-LD) laminated film bag-in-box
QB/T 1128-1991 Uniaxially oriented high-density polyethylene film

British Standards Institution (BSI), b low density polyethylene

BS 3012:1970 Specification for low and intermediate density polythene sheet for general purposes
BS 2919:1968 Specification for low and intermediate density polythene rod for general purposes
BS 7344:1990 Specification for reeled low density polyethylene film for general purpose application
BS ISO 10146:2019 Crosslinked polyethylene (PE-X) and crosslinked medium density polyethylene (PE-MDX). Effect of time and temperature on expected strength
BS EN ISO 15527:2013 Plastics. Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD). Requirements and test methods
BS 2782-4 Method 452C:1979 Methods of testing plastics - Chemical properties - Determination of butyl rubber content of low density polyethylene compounds
BS 7655-10.1:2000 Specification for insulating and sheathing materials for cables - Polyethylene sheathing compounds - Thermoplastic medium density polyethylene (MDPE) sheathing compound

PK-PSQCA, b low density polyethylene

PS 391-1964 Polythene tube for cold water services (Low Density)

SE-SIS, b low density polyethylene

SIS SMS 1775-1967 Plastic pipes. Pressure pipes of low density polyethylene
SIS SMS 1878-1967 Plastic pipes. Pressure pipes of low density polyethylene. Testing
SIS SMS 2014-1967 Plastic pipes. lJressure and waste wate.r pipes of high density polyethylene
SIS SMS 2015-1967 Plastic pipes. Pressure and waste water pipes of hi.gh density polyethylene. Testing

Danish Standards Foundation, b low density polyethylene

DS 2066:1975 Uncoloured covering films of low density polyethylene
DS 443:1985 Dansk Ingenierforening's Code of Practice for gas pipes of HDPE and MDPE
DS/ISO DATA 6:1979 Low desity polyethylene pipes and fittings. Chemical resistance with respect to fluids
DS/ISO DATA 8:1979 High density polythylene pipes an fitting. Chemical resistance with respect to fluids

CO-ICONTEC, b low density polyethylene

ICONTEC 1449-1986

中国轻工总会, b low density polyethylene

QB 1930-1993 Low density polyethylene (LDPE, LLDPE) pipes for water supply

General Motors Corporation (GM), b low density polyethylene

GM 9984219-1993 Sealer - Low Bake, Low Density Sprayable PVC
GM 9982217-1993 Sealer - High Bake, Low Density Sprayable PVC Revision B
GM 9984209-1993 Sealer - Low Bake, Paintable, Pumpable PVC Revision B

Indonesia Standards, b low density polyethylene

SNI 06-1315-2006 Low density polyethylene inner liners of fertilizer sacks
SNI 06-0176-2000 High impact polystyrene
SNI 06-6312-2000 High density polyethylene plastic bags
SNI 06-0939-2006 High density polyethylene (HPDE) for plastic bottles
SNI 7593-2010

American Society for Testing and Materials (ASTM), b low density polyethylene

ASTM D4635-08 Standard Specification for Polyethylene Films Made from Low-Density Polyethylene for General Use and Packaging Applications
ASTM D4635-16 Standard Specification for Plastic Films Made from Low-Density Polyethylene and Linear Low-Density Polyethylene for General Use and Packaging Applications
ASTM D4635-01 Standard Specification for Polyethylene Films Made from Low-Density Polyethylene for General Use and Packaging Applications
ASTM D4635-95 Standard Specification for Polyethylene Films Made from Low-Density Polyethylene for General Use and Packaging Applications
ASTM D4635-08a Standard Specification for Polyethylene Films Made from Low-Density Polyethylene for General Use and Packaging Applications
ASTM D7399-18 Standard Test Method for Determination of the Amount of Polypropylene in Polypropylene/Low Density Polyethylene Mixtures Using Infrared Spectrophotometry
ASTM D7399-08 Standard Test Method for Determination of the Amount of Polypropylene (PP) in Polypropylene/LDPE Mixtures Using Infrared Spectrophotometer (FTIR)
ASTM D3981-95 Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications
ASTM D3981-08 Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications
ASTM D3981-09 Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications
ASTM D831-94(1999)e1 Standard Test Method for Gas Content of Cable and Capacitor Oils
ASTM D8318-20 Standard Specification for Low-Density Poly (Vinylidene Fluoride) Based Material Intended for Use in Wire and Cable Jacketing
ASTM F2619/F2619M-19 Standard Specification for High-Density Polyethylene (PE) Line Pipe
ASTM F2619/F2619M-11 Standard Specification for High-Density Polyethylene (PE) Line Pipe
ASTM F2619/F2619M-20 Standard Specification for High-Density Polyethylene (PE) Line Pipe
ASTM F3202-19 Standard Specification for Solid Wall Poly (Vinyl Chloride) PVC Fittings for Joining Corrugated Wall High Density Polyethylene (PE) and Polypropylene (PP) Piping
ASTM F3202-19a Standard Specification for Solid Wall Poly (Vinyl Chloride) PVC Fittings for Joining Corrugated Wall High Density Polyethylene (PE) and Polypropylene (PP) Piping
ASTM D3981-03 Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications
ASTM F2619/F2619M-07 Standard Specification for High-Density Polyethylene (PE) Line Pipe
ASTM F2649-08 Standard Specification for Corrugated High Density Polyethylene (HDPE) Grease Interceptor Tanks
ASTM F2619/F2619M-13 Standard Specification for High-Density Polyethylene 40;PE41; Line Pipe
ASTM F2649-14(2023) Standard Specification for Corrugated High Density Polyethylene (HDPE) Grease Interceptor Tanks
ASTM D3981-09a Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications
ASTM D3981-09a(2016) Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications
ASTM F1759-97 Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications
ASTM F1759-97(2004) Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications
ASTM F2649-14(2019) Standard Specification for Corrugated High Density Polyethylene (HDPE) Grease Interceptor Tanks
ASTM D5017-96(2003)e1 Standard Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic Resonance
ASTM D5017-96 Standard Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic Resonance
ASTM D5017-96(2009)e1 Standard Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic Resonance
ASTM F2649-08a Standard Specification for Corrugated High Density Polyethylene (HDPE) Grease Interceptor Tanks
ASTM F2737-11 Standard Specification for Corrugated High Density Polyethylene (HDPE) Water Quality Units
ASTM D3485-15 Standard Specification for Coilable High Density Polyethylene (HDPE) Cable in Conduit (CIC)
ASTM D5017-17 Standard Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic Resonance
ASTM F2737-10 Standard Specification for Corrugated High Density Polyethylene (HDPE) Water Quality Units
ASTM F1759-97(2010) Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications
ASTM F2737-10a Standard Specification for Corrugated High Density Polyethylene (HDPE) Water Quality Units
ASTM D2839-10 Standard Practice for Use of a Melt Index Strand for Determining Density of Polyethylene
ASTM D2839-16 Standard Practice for Use of a Melt Index Strand for Determining Density of Polyethylene
ASTM D4883-18 Standard Test Method for Density of Polyethylene by the Ultrasound Technique
ASTM D4883-99 Standard Test Method for Density of Polyethylene by the Ultrasound Technique
ASTM F2160-01 Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)
ASTM F2737-11(2021) Standard Specification for Corrugated High Density Polyethylene (HDPE) Water Quality Units
ASTM F2649-14 Standard Specification for Corrugated High Density Polyethylene &40;HDPE&41; Grease Interceptor Tanks
ASTM F2737-11(2017) Standard Specification for Corrugated High Density Polyethylene (HDPE) Water Quality Units
ASTM D4883-03 Standard Test Method for Density of Polyethylene by the Ultrasound Technique
ASTM D4883-08 Standard Test Method for Density of Polyethylene by the Ultrasound Technique
ASTM D5815-95(2001)e1 Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Linear Low-Density Polyethylene Using Liquid Chromatograph (LC)
ASTM F2487-13(2017) Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Corrugated High Density Polyethylene and Polypropylene Pipelines
ASTM F2160-05 Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)
ASTM D3485-22 Standard Specification for Coilable High Density Polyethylene (HDPE) Cable in Conduit (CIC)
ASTM D2839-16(2023) Standard Practice for Use of a Melt Index Strand for Determining Density of Polyethylene

(U.S.) Ford Automotive Standards, b low density polyethylene

FORD WSL-M98D29-A-2010 COMPOSITE, FUEL TANK HIGH DENSITY POLYETHYLENE (PE-HD), LINEAR LOW DENSITY POLYETHYLENE (PE-LLD) TIE LAYERS, ETHYLENE VINYL ALCOHOL (E/VAL) BARRIER ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD U-MG099-8008-1994 HIGH DENSITY POLYETHYLENE FOIL PAINT MASKING
FORD ESF-M8G156-B-2000 GASKET, CROSSLINKED POLYETHYLENE FOAM, CLOSED CELL, LOWER DENSITY (Shown on ESF-M8G156-A)
FORD ESA-M99D52-A-2008 POLYETHYLENE FILM, LOW DENSITY - STRETCH***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M3G102-A-2005 TAPE, LOW DENSITY POLYVINYL CHLORIDE FOAM PRESSURE SENSITIVE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M4D799-A-2006 POLYETHYLENE (PE), MEDIUM DENSITY, LOW MELT FLOW RATE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M3G102-B-2012 TAPE, LOW DENSITY POLYVINYL CHLORIDE FOAM PRESSURE SENSITIVE, SUPERSOFT ***TO BE UESD WITH FORD WSS-M99P1111-A***
FORD WSS-M4D955-A-2012 POLYETHYLENE (PE), HIGH DENSITY MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M3G102-B2-2007 TAPE, LOW DENSITY POLYVINYL CHLORIDE/NITRILE FOAM, PRESSURE SENSITIVE, ULTRA SOFT ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD SL-M4D9575-B-2008 POLYETHYLENE, HIGH DENSITY, LOW MFI ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M3G102-B-2007 TAPE, LOW DENSITY POLYVINYL CHLORIDE FOAM PRESSURE SENSITIVE, SUPERSOFT ***TO BE UESD WITH FORD WSS-M99P1111-A***
FORD WSK-M4D695-A-2010 POLYETHYLENE (PE), MOLDING COMPOUND, HIGH DENSITY, LOW MELT FLOW RATE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M3H104-A5-2008 CARPET, POLYPROPYLENE, DILOUR, NEEDLED, - LATEX BACKCOATED, LDPE EXTRUSION BACKED - ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M4D880-A-2006 POLYETHYLENE (PE), LINEAR LOW DENSITY MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M4G267-A4-1994 SEALER, TAPE FORM, LOW EXPANSION, WELDABLE, EPDM BASE (TACKY SIDE) AND EVA, FILM (NON-TACKY SIDE)
FORD WSK-M4D800-A-2010 POLYETHYLENE (PE), HIGH DENSITY, HIGH MELT FLOW RATE, LOW IMPACT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M4D799-A-2012 POLYETHYLENE (PE), MEDIUM DENSITY, LOW MELT FLOW RATE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M4D233-C-2007 POLYVINYL CHLORIDE COPOLYMER FOAM, HIGH DENSITY ***TO BE USED WITH FORD M99P1111-A***
FORD ESB-M4D233-C-2009 POLYVINYL CHLORIDE COPOLYMER FOAM - HIGH DENSITY ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M4D645-A-2009 POLYETHYLENE (PE), HIGH DENSITY MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M4D659-A-2013 POLYETHYLENE (PE), HIGH DENSITY MOLDING COMPOUND, RECYCLED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M4D659-A-2014 POLYETHYLENE (PE), HIGH DENSITY MOLDING COMPOUND, RECYCLED ***TO BE USED WITH FORD WSS-M99P1111-A***

American National Standards Institute （ANSI), b low density polyethylene

ANSI/ASTM D4635:2001 Specification for Low-Density Polyethylene Films for General Use and Packaging Applications (08.03)
ANSI/ASTM F2619:2013 Specification for High-Density Polyethylene (PE) Line Pipe
ANSI/ASTM D5203:1998 Specification for Polyethylene Plastics Molding and Extrusion Materials from Recycled Post-Consumer HDPE Sources (08.03)
ANSI/ASTM F1759:1997 Practice for Design of High-density Polyethylene (HDPE) Manholes for Subsurface Applications
ANSI/ASTM D4883:1999 Test Method for Density of Polyethylene by the Ultrasound Technique (08.03)
ANSI/UL 651A-2011 Standard for Safety for Type EB and A Rigid PVC Conduit and HDPE Conduit
ANSI/ASTM F2737:2011 Specification For Corrugated High Density Polyethylene (Hdpe) Water Quality Units
ANSI/ASTM F2649:2008 Specification for Corrugated High Density Polyethylene (HDPE) Grease Interceptor Tanks

Canadian General Standards Board （CGSB), b low density polyethylene

CGSB 43.30-96-CAN/CGSB-1996 Low-Density, Polyethylene, Packaging Film

NZ-SNZ, b low density polyethylene

NZS 7603:1979 Refuse Bags for Local Authority Collection (Low Density Polyethylene)

Standard Association of Australia （SAA）, b low density polyethylene

AS 2518:1992 Fusion-bonded low-density polyethylene coating for pipes and fittings
AS 4321:2001 Fusion-bonded medium-density polyethylene coating and lining for pipes and fittings

Hebei Provincial Standard of the People's Republic of China, b low density polyethylene

DB/1300 Y28 6-1988 High Density Polyethylene Strapping Rope
DB/T1300 Y28 4-1988 HDPE blown film for packaging

Taiwan Provincial Standard of the People's Republic of China, b low density polyethylene

CNS 12721-1990 U-Shaped High Density Polyethylene Bag
CNS 12722-1990 Method of Test for U-Shaped High Density Polyethylene Bag
CNS 12493-1989 High Density Polyethylene Geomembrane for Sanitary Landfill
CNS 12876-1991 Crosslinked Polyethylene-Aluminum-Crosslinked Polythylene Pipes for Water Work
CNS 2458-1993 High Density Polyethylene Pipes for Chemical Industrial and General Uses
CNS 12494-1989 Method of Test for High Density Polyethylene Geomembrane for Sanitary Landfill
CNS 12877-1991 Method of Test for Crosslinked Polyethylene-Aluminum-Crosslinked Polyethylene Pipes for Water Works
CNS 2459-1993 Method of Test for High Density Polyethylene Pipes for Chemical Industrial and General Uses

German Institute for Standardization, b low density polyethylene

DIN V 4279-7:1994 Internal pressure test of pressure pipelines for water - Pressure pipes of low-density polyethylene PE-LD, pressure pipes of high density polyethylene PE-HD (PE 80 and PE 100), pressure pipes of cross-linked polyethylene PE-X and pressure pipes of unplast
DIN 55530:1987 Plastic films for packaging; barrier materials made of low density polyethylene
DIN 3543-4:1984 High density polyethylene (HDPE) tapping valves for HDPE pipes; dimensions
DIN 16895:1996 Crosslinked medium density polyethylene (PE-MDX) pipes - Dimensions
DIN 16895:2011-04 Crosslinked medium density polyethylene (PE-MDX) pipes - Dimensions
DIN 55530:2011-05 Films for packaging - Barrier materials made of low density polyethylene (PE-LD) films and recyclates
DIN 16895:2011 Crosslinked medium density polyethylene (PE-MDX) pipes - Dimensions
DIN 8075 Bb.1:1984 High density polyethylene (HDPE) pipes; chemical resistance of pipes and fittings
DIN 55530:2011 Films for packaging - Barrier materials made of low density polyethylene (PE-LD) films and recyclates
DIN EN ISO 15527:2013 Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods (ISO 15527:2010); German version EN ISO 15527:2013
DIN 16842:2013 Polyethylene (PE) pipes - PE-HD for pressureless applications - General quality requirements, dimensions and testing; Text in German and English
DIN 16972:1995 Compression moulded plates made of polyethylene high density (PE-UHMW), (PE-HMW), (PE-HD) - Technical specifications
DIN 16894:2011 Pipes of crosslinked medium density polyethylene (PE-MDX) - General quality requirements and testing
DIN 16894:1997 Pipes of crosslinked medium density polyethylene (PE-MDX) - General quality requirements and testing
DIN 16894:2011-04 Pipes of crosslinked medium density polyethylene (PE-MDX) - General quality requirements and testing

Professional Standard - Urban Construction, b low density polyethylene

CJ/T 276-2008 Linear low density polyethylene geomembrane for landfills
CJ/T 504-2016 Cable with the sheath of high density polyethylene
CJ/T 3078-1998 High density polyethylene compounds for construction cable
CJ/T 165-2002 Spirally enwound structure-wall pipes of high density polyethylene (HDPE)
CJ/T 297-2016 High density polyethylene sheathing compounds for bridge cables
CJ/T 297-2008 High density polyethylene sheathing compounds for bridge cable
CJ/T 371-2011 High density polyethylenepipes for landfields
CJ/T 234-2006 High density polyethylene geomembrane for landfills
CJ/T 358-2010 High density polyethylene (HDPE) sewer pipes for trenchless installation
CJ/T 461-2014 High density polyethylene suspended carrier for water treatment
CJ/T 250-2007 High density polyethylene pipes and fittings for drainage inside buildings
CJ/T 250-2018 High-density polyethylene (HDPE) pipes and fittings for building drainage
CJ/T 114-2000 Preformed directly buried insulating pipes for polyurethane(PUR)foamed-plastics and high density polyethylene(PE)
CJ/T 480-2015 Prefabricated directly buried composite insulating pipes with polyurethane (PUR) foamed-plastics and high density polyethylene(PE) casing pipes
CJ/T 480--2015 High-density polyethylene outer protection pipe polyurethane foam prefabricated direct buried thermal insulation composite plastic pipe

International Organization for Standardization (ISO), b low density polyethylene

ISO/TR 7472:1981 Low density polyethylene pipes and fittings — Chemical resistance with respect to fluids
ISO 10146:2019 Crosslinked polyethylene (PE-X) and crosslinked medium density polyethylene (PE-MDX) — Effect of time and temperature on expected strength
ISO 4056:1978 Polyethylene (PE) pipes and fittings — Designation of polyethylene, based on nominal density and melt flow index
ISO 7258:1984 Polytetrafluoroethylene (PTFE) tubing for aerospace applications; Methods for the determination of the density and relative density
ISO 8770:1991 High-density polyethylene (PE-HD) pipes and fittings for soil and waste discharge (low and high temperature) systems inside buildings; specifications
ISO 4439:1979 Unplasticized polyvinyl chloride (PVC) pipes and fittings; Determination and specification of density
ISO/TR 7474:1981 High density polyethylene pipes and fittings — Chemical resistance with respect to fluids to be conveyed
ISO 3514:1976 Chlorinated polyvinyl chloride (CPVC) pipes and fittings; Specification and determination of density
ISO 1068:1975/Cor 1:1980 Plastics; PVC resins; Determination of compacted apparent bulk density
ISO 1068:1975 Plastics; PVC resins; Determination of compacted apparent bulk density
ISO 8772:1991 High density polyethylene (PE-HD) pipes and fittings for buried drainage and sewerage systems; specifications

Association Francaise de Normalisation, b low density polyethylene

NF T53-020:1977 Based low density polythene compounds for pressure pipelines. Specifications.
NF T51-141:1974 Low density polyethylene based plastics. Determination of the content of carbon black. Rapid method.
NF T54-049:1977 Evaluation of the reference density of polyethylene in form of a pipes.
NF T54-050:1977 Evaluation of the reference density of polyethylene in form of granulates.
NF T51-140:1974 Low density polythene based plastics. Determination of the content of carbon black by pyrolisis.
NF T54-048:1977 Plastics. Low density polyethylene pipes. Preparation of specimens for physical testing.
NF T54-044:1978 Polyethylene (pe) pipes and fittings. Designation of polyethylene based on nominal density and melt flow index.
NF T54-046:1978 Low density polyethylene (pe-bd) pipes and fittings. Chemical resistance with respect to fluids to be conveyed.
NF L41-250*NF ISO 7258:1987 Polytetrafluoroethylene (ptfe) tubing for aerospace applications. Methods for the determination of the density and relative density.
NF ISO 7258:1987 Tubes en polytetrafluoréthylène (PTFE) à usage aéronautique - Méthodes de détermination de la masse volumique et de la densité
NF T51-042:1967 Plastics. PVC resins. Determination of compacted apparent bulk density.

Professional Standard - Customs, b low density polyethylene

HS/T 10-2006 Identification of linear low density polyethylene in primary forms

ET-QSAE, b low density polyethylene

Society of Automotive Engineers (SAE), b low density polyethylene

SAE AMS-L-P-390-2000 Plastic, Molding and Extrusion Material Polyethylene and Copolymers (Low, Medium, and High Density)
SAE AMS3843-1962 POLYTETRAFLUOROETHYLENE SHEET TFE Fluorocarbon Resin, Asbestos Fiber Reinforced High Compressibility
SAE AMS3843B-1986 POLYTETRAFLUOROETHYLENE SHEET Asbestos Fiber Reinforced High Compressibility, Low Density
SAE AMS3843C-1995 POLYTETRAFLUOROETHYLENE SHEET Asbestos Fiber Reinforced High Compressibility, Low Density
SAE AMS3843A-1976 POLYTETRAFLUOROETHYLENE SHEET Asbestos Fiber Reinforced High Compressibility, Low Density
SAE AMS3843C-1986 Polytetrafluoroethylene Sheet-Asbestos Fiber Reinforced High Compressibility, Low Density
SAE MA2172-1990 Hose Assembly, Polytetrafluoroethylene, PTFE Cres Reinforced, 204 ℃, 21,000 kPa, Lightweight Beam Seal, Straight to 90 Degrees, Metric FSC 4720
SAE MA2171-1990 Hose Assembly, Polytetrafluoroethylene, PTFE Cres Reinforced, 204 ℃, 21,000 kPa, Lightweight Beam Seal, Straight to 45 Degrees, Metric

SAE - SAE International, b low density polyethylene

SAE AMS-L-P-390A-2003 Plastic@ Molding and Extrusion Material Polyethylene and Copolymers (Low@ Medium@ and High Density)
SAE AMS3843C-1991 Polytetrafluoroethylene Sheet Asbestos Fiber Reinforced High Compressibility@ Low Density
SAE AMS3843D-2014 Polytetrafluoroethylene Sheet Asbestos Fiber Reinforced High Compressibility@ Low Density
SAE AS4009-1993 Hose Assembly@ Polytetrafluoroethylene@ PTFE@ Metal Braid@ Medium Pressure@ Beam Seal@ 45 Degrees to 45 Degrees
SAE AS4009A-2017 HOSE ASSEMBLY@ POLYTETRAFLUOROETHYLENE@ PTFE@ METAL BRAID@ MEDIUM PRESSURE@ BEAM SEAL@ 45? TO 45?

ES-AENOR, b low density polyethylene

UNE 53-328-1985
UNE 104-311-1991 Plastics. High density poliethylene sheets coextruded with other types of polyethylene for waterproofing in civil works. Specifications and test methods
UNE 53-404-1987

IT-UNI, b low density polyethylene

Underwriters Laboratories (UL), b low density polyethylene

UL 651B-2007 UL Standard for Safety Continuous Length HDPE Conduit Second Edition
UL 651A-1989 Type EB and A rigid PVC conduit and HDPE conduit
UL 651A-1995 Type EB and A rigid PVC conduit and HDPE conduit
UL 651A-2000 UL Standard for Safety Type EB and A Rigid PVC Conduit and HDPE Conduit Fourth Edition; Revisions Through and Including September 6, 2007

Malaysia Standards, b low density polyethylene

MS 1478-1999 Specification for low-density polyethylene films for general use and packaging applications

GM Global, b low density polyethylene

GMW 16426-2013 High Density Polyethylene - Blow Moldable, Low Environmental Stress Cracking Resistance Issue 2; English
GMW 15800-2013 High Density Polyethylene - Blow Molding Color Concentrate Issue 2; English
GMW 17022-2013 Polypropylene Copolymer 鈥?Low Density, UV Stable, Mineral Filled Issue 1; English

Professional Standard - Post and Telecommunication, b low density polyethylene

YD/T 1485-2006 Middle density polyethylene compounds for optical fiber cable sheathing

ISUZU - Isuzu Motors Ltd., b low density polyethylene

ISC-C92-014A-2013 High Density Polyethylene Material，for Exterior

轻工业部, b low density polyethylene

QB 1128-1991 Uniaxially oriented high density polyethylene film

国家能源局, b low density polyethylene

SH/T 1801-2016 Medium density polyethylene resin for geomembrane

BE-NBN, b low density polyethylene

NBN T 42-006-1979 Low density polyethylene pipes and fittings - Chemical resistance with respect to fluids
NBN 708-1967
NBN T 42-007-1979 High density polyethylene pipes and fittings - Chemical resistance with respect to fluids

CH-SNV, b low density polyethylene

国家市场监督管理总局、中国国家标准化管理委员会, b low density polyethylene

GB/T 40169-2021 Compression-moulded plates of ultra-high-molecular-weight polyethylene（PE-UHMW）and high density polyethylene (PE-HD)
GB/T 39246-2020 Prefabricated directly buried insulating fittings with seamless high density polyethylene casing pipe
GB/T 37263-2018 Prefabricated directly buried insulating plastic-steel-plastic composite pipes with polyurethane [PUR]foamed-plastics and high density polyethylene [PE]casing pipes

Professional Standard - Commodity Inspection, b low density polyethylene

SN/T 1513-2005 Determination of the density for polyethylene resin and polypropylene resin - Method of standing still in the centre of immersion liquid at atmospheric temperature

Beijing Provincial Standard of the People's Republic of China, b low density polyethylene

DB11/ 200-2000 High-density polyethylene (HDPE) vest style plastic bag

农业农村部, b low density polyethylene

SC/T 4025-2016 Aquaculture cage floating frame high density polyethylene pipe
SC/T 4041-2018 General technical requirements for high-density polyethylene frame deepwater cages
SC/T 4030-2016 General technical conditions for high-density polyethylene frame copper alloy mesh cages

Professional Standard - Water Conservancy, b low density polyethylene

SL/T 96.2-1994 Technical parameters and requirements of plastic pipe for sprinkler irrigation.low density polyethylene pipe

CEN - European Committee for Standardization, b low density polyethylene

EN ISO 15527:2018 Plastics - Compression-moulded sheets of polyethylene (PE-UHMW@ PE-HD) - Requirements and test methods

European Committee for Standardization (CEN), b low density polyethylene

EN ISO 15527:2022 Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods (ISO 15527:2022)
EN ISO 15527:2013 Plastics - Compression-moulded sheets of polyethylene (PEUHMW@ PE-HD) - Requirements and test methods

Liaoning Provincial Standard of the People's Republic of China, b low density polyethylene

DB21/T 3090-2018 Standards for construction of high-density polyethylene fishing vessels

CY-CYS, b low density polyethylene

CYS 106 Pt.1-1985 SPECIFICATION FOR LOW DENSITY POLYETHYLENE (LPPE) PIPES FOR AGRICULTURAL, APPLIATIONS Part 1; Dimensions and Pressure Ratings
CYS 106 Pt.2-1985 SPECIFICATION FOR LOW DENSITY POLYETNYLENE (LDPE) PIPES FDR AGRICULTURAL APPLICATONS Part 2: General Quality Reguirements - Testing

NL-NEN, b low density polyethylene

NEN 7105-1987 Plastics pipelines for floorheating - Low density polyethylene (PE-LD) pipes Requirements and test methods

Professional Standard - Chemical Industry, b low density polyethylene

HG/T 2900-1997 Testing method for bulk density of polytetrafluoroethylene resin

Korean Agency for Technology and Standards (KATS), b low density polyethylene

KS M 3500-2009 Large diameter pipes of high density polyethylene with profiled wall and smooth inside pipe surface
KS M 3500-1985 Large diameter pipes of high density polyethylene with profiled wall and smooth inside pipe surface
KS F 2234-2004 Measuring method for the mass per unit volume(density) and the mass per unit of surface area of polystyrene composite wood wool cement boards

Anhui Provincial Standard of the People's Republic of China, b low density polyethylene

DB34/T 1634-2012 High-density polyethylene (HDPE) single-wall threaded pipe for buried use

PT-IPQ, b low density polyethylene

中华人民共和国环境保护部, b low density polyethylene

GB 36900.3-2018 Cross Linked High Density Polyethene High Integrity Container for Low-and-intermediate level radioactive solid wastes

UY-UNIT, b low density polyethylene

UNIT 657-1982

Professional Standard - Machinery, b low density polyethylene

JB/T 7547-1994 High density polyethylene ultrathin film blow molding machine for wrapping

Professional Standard - Petrochemical Industry, b low density polyethylene

SH/T 1772-2011 Plastics.Determination of non-Newtonian index(NNI)for high density polyethylene
SH/T 1775-2012 Plastics.Determination of linear low density polyethylene (PE-LLD) composition.Carbon-13 nuclear magnetic resonance

AT-ON, b low density polyethylene

ONORM B 5170-2001 Low density polyethylene pipes(PE 40) for water pipelines - Dimensions, requirements, tests, marking of conformity

Military Standard of the People's Republic of China-General Armament Department, b low density polyethylene

GJB 973/3-2021 Detailed Specification for Type SFLF46-50-3-52 Extruded Low Density Polytetrafluoroethylene Insulated Low Loss Flexible Coaxial Radio Frequency Cable
GJB 973/7-2021 Detailed Specification for Type SFLF46-50-6-53 Extruded Low Density Polytetrafluoroethylene Insulated Low Loss Flexible Coaxial Radio Frequency Cable
GJB 973/2-2021 Detailed Specification for Type SFLF46-50-3-51 Extruded Low Density Polytetrafluoroethylene Insulated Low Loss Flexible Coaxial Radio Frequency Cable
GJB 973/8-2021 Detailed specification for SFLF46-50-8-51 type extruded low-density polytetrafluoroethylene insulated low-loss flexible coaxial radio frequency cable
GJB 973/4-2021 Detailed Specification for Type SFLF46-50-4-52 Extruded Low Density Polytetrafluoroethylene Insulated Low Loss Flexible Coaxial Radio Frequency Cable
GJB 973/6-2021 Detailed Specification for Type SFLF46-50-4-54 Extruded Low Density Polytetrafluoroethylene Insulated Low Loss Flexible Coaxial Radio Frequency Cable
GJB 973/1-2021 Detailed Specification for Type SFLF46-50-2-51 Extruded Low Density Polytetrafluoroethylene Insulated Low Loss Flexible Coaxial Radio Frequency Cable
GJB 973/5-2021 Detailed Specification for Type SFLF46-50-4-53 Extruded Low Density Polytetrafluoroethylene Insulated Low Loss Flexible Coaxial Radio Frequency Cable

TR-TSE, b low density polyethylene

TS 2415-1976 P L A S T I C S PVC RESINS — DETERMINATION OF COMPACTED APPARENT BULK DENSITY

U.S. Military Regulations and Norms, b low density polyethylene

ARMY MIL-O-60540 (2)-1994 OBTURATING BANDS, PLASTIC, RIGID, HIGH IMPACT, POLYVINYL CHLORIDE (MOLDED)
ARMY MIL-O-60540-1966 OBTURATING BANDS, PLASTIC, RIGID, HIGH IMPACT, POLYVINYL CHLORIDE (MOLDED)

Japanese Industrial Standards Committee (JISC), b low density polyethylene

JIS K 7370:2000 Plastics -- PVC Resins -- Determination of compacted apparent bulk density

Professional Standard - Traffic, b low density polyethylene

JT/T 496-2004 High-density polyethylene silicore duct for highway communication conduit
JT/T 496-2018 High-density polyethylene silicore duct for highway communication conduit

AENOR, b low density polyethylene

UNE 53137:1977 PLASTICS. PVC RESINS. DETERMINATION OF THE COMPACTED APPARENT BULK DENSITY
UNE 53331:1997 IN PLASTICS. UNPLASTIZED POLY(VINYL CHLORIDE) AND HIGH AND MEDIUM DENSITY POLYETHYLENE (PE) PIPES. CRITERION FOR THE ASSESSMENT OF PIPES FOR PLASTICS PIPING SYSTEMS WITH CAR WITHOUT PRESSURE UNDER EXTERNAL LOADS.

Qinghai Provincial Standard of the People's Republic of China, b low density polyethylene

DB63/T 1464-2016 Technical specifications for culture of salmon and trout in high-density polyethylene circular cages
DB63/T 1465-2016 Technical requirements for high-density polyethylene circular cages for fish farming

Professional Standard - Recommended Standards for Engineering Construction, b low density polyethylene

CECS 282-2010 Technical regulations for building drainage high-density polyethylene (HDPE) pipeline engineering

工业和信息化部, b low density polyethylene

HG/T 6039-2022 Modified high-density polyethylene (PE-HD) material for plastic water floats

United States Navy, b low density polyethylene

NAVY PPP-C-1797 A NOTICE 2-2005 CUSHIONING MATERIAL, RESILIENT, LOW DENSITY, UNICELLULAR, POLYPROPYLENE FOAM
NAVY PPP-C-1797 A-1982 CUSHIONING MATERIAL, RESILIENT, LOW DENSITY, UNICELLULAR, POLYPROPYLENE FOAM

(U.S.) Plastic Pipe Association, b low density polyethylene

PPI TN-36-2006 General Guidelines for Connecting HDPE Potable Water Pressure Pipes to DI and PVC Piping Systems

FI-SFS, b low density polyethylene

SFS 3822-1976

RU-GOST R, b low density polyethylene

GOST R 50485-1993 Plastics. Homopolymer and copolymer resins of vinyl chloride. Determination of compacted apparent bulk density

VN-TCVN, b low density polyethylene

TCVN 6038-1995 Unplasticized polyvinyl chloride (PVC) pipes and fittings.Determination and specification of density