ZH
RU
ES

Nickel electrode application

Nickel electrode application, Total:448 items.

In the international standard classification, Nickel electrode application involves: Products of non-ferrous metals, Non-ferrous metals, Welding, brazing and soldering, Coatings and related processes used in aerospace industry, Iron and steel products, Powder metallurgy, Semiconductor devices, Optoelectronics. Laser equipment, Materials for aerospace construction, Galvanic cells and batteries, Testing of metals, Medical equipment, Surface treatment and coating, Rotating machinery, Products of the chemical industry, Ferroalloys, Radiation measurements, Inorganic chemicals, Electrical wires and cables, Pipeline components and pipelines, Analytical chemistry, Quality, Aerospace electric equipment and systems, Capacitors, Thermodynamics and temperature measurements, Components for aerospace construction, On-board equipment and instruments, Solar energy engineering, Materials for the reinforcement of composites, Conducting materials, Lamps and related equipment, Electricity. Magnetism. Electrical and magnetic measurements.


British Standards Institution (BSI), Nickel electrode application

  • BS 558 and 564:1970 Specifications for nickel anodes, anode nickel and nickel salts for electroplating
  • BS 3504:1962 Specification for magnesium-activated nickel for cathodes of electronic tubes and valves
  • BS EN ISO 18274:2011 Welding consumables. Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys. Classification
  • BS EN ISO 18274:2010 Welding consumables. Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys. Classification
  • BS 6783-7:1986 Sampling and analysis of nickel, ferronickel and nickel alloys - Method for determination of sulphur in nickel, ferronickel and nickel alloys by infra-red absorption after induction furnace combustion
  • BS 6783-5:1986 Sampling and analysis of nickel, ferronickel and nickel alloys - Method for determination of carbon in nickel, ferronickel and nickel alloys by infra-red absorption after induction furnace combustion
  • 18/30352714 DC BS IEC 62973-2. Railway applications. Batteries for auxiliary power supply systems. Part 2. Nickel Cadmium (NiCd) batteries
  • BS ISO 20168:2016 Resistance welding. Locking tapers for electrode holders and electrode caps
  • BS 4215-2:1987 Resistance spot welding electrodes, electrode holders and ancillary equipment - Specification for straight resistance spot welding electrodes
  • BS 7310:1990 Specification for ion-selective electrodes, reference electrodes, combination electrodes and ion-selective electrode meters for determination of ions in solution
  • BS EN 120005:1993 Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Photodiodes, photodiode-arrays (not intended for fibre optic applications)
  • BS 2586:1979 Specification for glass and reference electrodes for the measurement of pH
  • 21/30420282 DC BS EN ISO 18274. Welding consumables. Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys. Classification
  • BS 2G 215-1:1985 Nickel-chromium and nickel-aluminium thermocouple extension cables for aircraft. Specification for conductors
  • BS 4215-7:1987 Resistance spot welding electrodes, electrode holders and ancillary equipment - Specification for male electrode caps

Japanese Industrial Standards Committee (JISC), Nickel electrode application

  • JIS H 4502:1990 Nickel sheets and strips for cathode of electronic tube
  • JIS Z 3334:2017 Rods, solid wires and strip electrodes for welding of nickel and nickel-alloy
  • JIS Z 3334:2011 Nickel and nickel-alloy rods, solid wires and strip electrodes for welding
  • JIS H 4522:1996 Seamless nickel tube for cathode of vacuum tube
  • JIS C 8705:2019 Secondary sealed nickel-cadmium cells and batteries for portable applications
  • JIS H 4501:1990 Nickel sheets and strips for electronic tube
  • JIS T 7404:2013 Ti-Ni alloy for implantable applications
  • JIS H 6125:1995 Magnesium galvanic anodes for cathodic protection
  • JIS H 7205:2003 Method of measuring discharge capacity of hydrogen absorbing alloys for a negative electrode of a rechargable nickel-metal hydride battery
  • JIS Z 3335:2014 Nickel and Nickel-alloy flux cored wires for arc welding
  • JIS H 4511:1990 Nickel bars and wires for electronic tube
  • JIS Z 3334:1999 Nickel and nickel alloy filler rods and solid wires for arc welding
  • JIS H 8626:1995 Electroplated coatings of nickel for engineering purposes and electroformings of nickel

CZ-CSN, Nickel electrode application

RU-GOST R, Nickel electrode application

  • GOST 2132-1990 Nicel anodes. Specifications
  • GOST 1790-1977 Wire of chromel, alumel, copel and constantan for thermoelectrodes of thermoelectrical transducers. Specifications
  • GOST 20398.13-1980 Field-effect transistors. Drain source resistance measurement technique
  • GOST R 50711-1994 Electrolyte for vented nickel-cadmium cells
  • GOST 20398.8-1974 Field-effect transistors. Drain current for V(Gs)=0 measurement technique
  • GOST R 54814-2018 Light emitted diodes and light emitting diode modules for general application. Terms and definitions
  • GOST R 54814-2011 Light emitted diodes and light emitting diode modules for general application. Terms and definitions

工业和信息化部, Nickel electrode application

  • YS/T 1338-2019 Capacitor electrode nickel powder
  • XB/T 702-2022 Three-electrode system test method for testing the electrochemical properties of rare earth hydrogen storage alloy powder for metal hydride-nickel battery negative electrodes
  • HG/T 5919-2021 Nickel sulfate for batteries
  • YS/T 65-2019 Cathode paste for aluminum electrolysis
  • SJ/T 11755-2020 General specifications for zinc-nickel batteries
  • SJ/T 1543-2020 Spectral analysis method of nickel and nickel alloys for electric vacuum devices
  • SJ/T 1542-2020 Chemical analysis methods of nickel and nickel alloys for electric vacuum devices
  • YS/T 285-2022 Prebaked anodes for aluminum electrolysis

IN-BIS, Nickel electrode application

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Nickel electrode application

  • GB/T 2056-2005 Copper、zinc、cadmium、nickel、tin anode sheets for electric plating
  • GB/T 26412-2010(英文版) Rare earthbase AB5 hydrogen storage powder used in negative electrodes of nickelmetal hydride batteries
  • GB/T 13293.8-1991 Higher purity copper cathode.Determination of nickel contene.Zeeman effect electrothermal atomic absorption spectrometric method
  • GB/T 31963-2015 RE-Mg-Ni-base superlattice hydrogen storage powder used in negative electrodes of nickel-metal hydride batteries
  • GB/T 26412-2010 RE-base ABhydrogen storage alloy powder used in negative pole of nickel-metal hydride batteries
  • GB 5295-1985 The spectral response characteristic series of photocathodes
  • GB/T 5295-1985 The spectral response characteristic series of photocathodes
  • GB/T 3121-1982 Nickel and its alloy wires for electronic tube
  • GB/T 20251-2006 Nickel foam for battery
  • GB/T 11088-1989 Nickel and its alloy sheets and strips for electronic tube
  • GB/T 23847-2009 Nickel sulfamate for electroplating
  • GB/T 18270-2000 Electrolyte for vented nickel-cadmium cells
  • GB/T 20253-2006 Nickel plated punched steel strip for rechargeable battery
  • GB/T 18289-2000 General specification of nickel-cadmium battery for cellular phone
  • GB/T 18270-2012 Electrolyte for vented nickel-cadmium cells
  • GB/T 23636-2009 Plate for lead-acid battery
  • GB/T 8754-1988 Anodizing of aluminium and aluminium alloys--Insulation check by measurement of breakdown potential
  • GB 8754-1988 Aluminum and aluminum alloy anodic oxidation application breakdown potential measurement method to test insulation

Korean Agency for Technology and Standards (KATS), Nickel electrode application

  • KS D 5584-1992(2002) NICKEL SHEETS AND STRIPS FOR CATHODE OF ELECTRONIC TUBE
  • KS D 5584-1981 NICKEL SHEETS AND STRIPS FOR CATHODE OF ELECTRONIC TUBE
  • KS D 7107-2019 Covered electrodes for 9 % nickel steel
  • KS D 7107-1995 Covered electrodes for 9 % nickel steel
  • KS B ISO 18274:2004 Welding consumables-Wire and strip electrodes, wires and rods for arc welding of nickel and nickel alloys-Classification
  • KS B ISO 18274:2014 Welding consumables — Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys — Classification
  • KS B ISO 18274:2019 Welding consumables — Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys — Classification
  • KS D 7108-2005 Filler rods and wires for TIG welding of 9 % nickel steel
  • KS D ISO 7524:2012 Nickel, ferronickel and nickel alloys-Determination of carbon content-Infra-red absorption method after induction furnace combustion
  • KS D ISO 7526:2012 Nickel, ferronickel and nickel alloys-Determination of sulfur content-Infra-red absorption method after induction furnace combustion
  • KS D 7031-2012(2022) Magnesium galvanic anodes for cathodic protection
  • KS D 7031-2012(2017) Magnesium galvanic anodes for cathodic protection
  • KS D 7045-1990(2010) Nickel and Nickel Alloy Fillier Rods and Wires for Arc Welding
  • KS C IEC 60993:2005 Electrolyte for vented nickel-cadmium cells
  • KS D 7045-2013 Nickel and Nickel Alloy Fillier Rods and Wires for Arc Welding
  • KS C IEC 62116:2010 Test procedure of islanding prevention measures for utility-interconnected photovoltaic inverters
  • KS C IEC 62116:2015 Test procedure of islanding prevention measures for utility-interconnected photovoltaic inverters
  • KS D 3550-1981(2021) Core wire for covered electrodes
  • KS D 3550-1986 Core wire for covered electrodes
  • KS A 5105-2006 Glass electrodes for measurement of pH
  • KS A 5105-2022 Glass electrodes for measurement of pH
  • KS A 5105-2006(2021) Glass electrodes for measurement of pH
  • KS A 5105-1986 Glass electrodes for measurement of pH

American National Standards Institute （ANSI), Nickel electrode application

Society of Automotive Engineers (SAE), Nickel electrode application

  • SAE AMS2405D-2013 Electroless Nickel Plating Low Phosphorus
  • SAE AMS2399A-1994 Electroless Nickel-Boron Plating
  • SAE AMS2405C-1984 Electroless Nickel Plating Low Phosphorus
  • SAE AMS5555-1968 NICKEL WIRE AND RIBBON 99Ni For Electronic Applications
  • SAE AMS2424F-2019 Plating, Nickel Low-Stressed Deposit
  • SAE AMS2424E-2003 Plating, Nickel Low-Stressed Deposit
  • SAE AMS2424G-2021 Plating, Nickel Low-Stressed Deposit
  • SAE AMS7734-1970 IRON-NICKEL ALLOY WIRE, COPPER CLAD 56Fe - 41Ni For Electronic Applications
  • SAE AMS5660B-1966 ALLOY, CORROSION AND HEAT RESISTANT Nickel Base - 12.5Cr - 6Mo - 2.6Ti - 34Fe Consumable Electrode or Vacuum Induction Melted
  • SAE AMS5660A-1960 ALLOY, CORROSION AND HEAT RESISTANT Nickel Base - 12.5Cr - 6Mo - 2.6Ti - 34Fe Consumable Electrode or Vacuum Induction Melted
  • SAE AMS3144A-2019 Primer, Anodic Electrodeposition for Aircraft Applications
  • SAE AMS2451/2-1998 Plating, Brush, Nickel Low Stress, Hard Deposit
  • SAE AMS2451/2B-2022 Plating, Brush, Nickel Low Stress, Hard Deposit
  • SAE AMS2451/2A-2011 Plating, Brush, Nickel Low Stress, Hard Deposit
  • SAE AMS5832F-2001 Nickel Alloy, Corrosion and Heat Resistant Welding Wire 52.5Ni 19Cr 3.0Mo 5.1Cb 0.90Ti 0.50Al 18Fe Consumable Electrode or Vacuum Induction Melted
  • SAE AMS5966A-2007 Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 50Ni - 20Cr - 20Co - 5.9Mo - 2.2Ti - 0.45AI Consumable Electrode or Vacuum Induction Melted
  • SAE AMS5966C-2019 Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 50Ni - 20Cr - 20Co - 5.9Mo - 2.2Ti - 0.45AI Consumable Electrode or Vacuum Induction Melted
  • SAE AMS2451/3A-2011 Plating, Brush, Nickel Low Stress, Low-Hardness Deposit
  • SAE AMS2451/3-1998 Plating, Brush, Nickel Low Stress, Low-Hardness Deposit
  • SAE AMS2451/3D-2022 Plating, Brush, Nickel Low-Stress, Low-Hardness Deposit
  • SAE AMS5832F-2006 Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted
  • SAE AMS2451/7A-2011 Plating, Brush, Nickel Low Stress, Medium-Hardness Deposit
  • SAE AMS2451/7B-2022 Plating, Brush, Nickel Low Stress, Medium-Hardness Deposit
  • SAE AMS5661B-1972 ALLOY BARS AND FORGINGS, CORROSION AND HEAT RESISTANT Nickel Base - 12.5Cr - 5.8Mo - 2.9Ti - 34Fe Consumable Electrode or Vacuum Induction Melted
  • SAE AMS5669A-2008 Alloy Bars, Corrosion and Heat Resistant Nickel Base - 15.5Cr - 0.95 (Cb + Ta) - 2.5Ti - 0.70Al - 7.0Fe Consumable Electrode or Vacuum Induction Melted
  • SAE AMS5660D-1970 ALLOY BARS AND FORGINGS, CORROSION AND HEAT RESISTANT Nickel Base - 12.5Cr - 6.0Mo - 2.5Ti - 34Fe Consumable Electrode or Vacuum Induction Melted
  • SAE AMS5661-1964 ALLOY BARS AND FORGINGS, CORROSION AND HEAT RESISTANT Nickel Base - 12.5Cr - 5.8Mo - 2.9Ti - 34Fe Consumable Electrode or Vacuum Induction Melted
  • SAE AMS5660E-1971 ALLOY BARS AND FORGINGS, CORROSION AND HEAT RESISTANT Nickel Base - 12.5Cr - 6.0Mo - 2.7Ti - 34Fe Consumable Electrode or Vacuum Induction Melted
  • SAE AMS5660C-1967 ALLOY BARS AND FORGINGS, CORROSION AND HEAT RESISTANT Nickel Base - 12.5Cr - 6.0Mo - 2.6Ti - 34Fe Consumable Electrode or Vacuum Induction Melted
  • SAE AMS5661A-1966 ALLOY BARS AND FORGINGS, CORROSION AND HEAT RESISTANT Nickel Base - 12.5Cr - 5.8Mo - 2.9Ti - 34Fe Consumable Electrode or Vacuum Induction Melted
  • SAE AMS5832J-2021 Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 52.5Ni - 19Cr - 3.0Mo - 5.1Cb(Nb) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted
  • SAE AMS5669-1965 Alloy Bars, Corrosion and Heat Resistant Nickel Base 15.5Cr 0.95(Cb+Ta) 2.5Ti 0.70Al 7.0Fe Consumable Electrode or Vacuum Induction Melted
  • SAE AMS5966B-2013 Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 50Ni 20Cr 20Co 5.9Mo 2.2Ti 0.45Al Consumable Electrode or Vacuum Induction Melted
  • SAE AMS5832-1966 ALLOY WIRE, WELDING, CORROSION AND HEAT RESISTANT Nickel Base - 19Cr - 3.1Mo - 5.1(Cb + Ta) - 0.90Ti - 0.50Al Consumable Electrode or Vacuum Induction Melted
  • SAE AMS5586-1964 ALLOY TUBING, WELDED, CORROSION AND HEAT RESISTANT Nickel Base - 19.5Cr - 13.5Co - 4.3Mo - 2.9Ti - 1.4Al Annealed Consumable Electrode or Vacuum Induction Melted
  • SAE AMS5586A-1970 ALLOY TUBING, WELDED, CORROSION AND HEAT RESISTANT Nickel Base - 19.5Cr - 13.5Co - 4.3Mo - 2.9Ti - 1.4Al Consumable Electrode or Vacuum Induction Melted, Annealed
  • SAE AMS5832A-1970 ALLOY WIRE, WELDING, CORROSION AND HEAT RESISTANT Nickel Base - 19Cr - 3.1Mo - 5.1(Cb + Ta) - 0.90Ti - 0.50Al Consumable Electrode or Vacuum Induction Melted
  • SAE AMS5669B-2014 Alloy Bars, Corrosion and Heat Resistant, Nickel Base - 15.5Cr - 0.95 (Cb + Ta) - 2.5Ti - 0.70Al - 7.0Fe, Consumable Electrode or Vacuum Induction Melted
  • SAE AMS2403N-2015 Plating, Nickel General Purpose
  • SAE AMS2403K-2002 Plating, Nickel General Purpose
  • SAE AMS2403P-2020 Plating, Nickel General Purpose
  • SAE AMS2403L-2009 Plating, Nickel General Purpose
  • SAE AMS2403R-2021 Plating, Nickel General Purpose
  • SAE AMS5684A-1951 WELDING ELECTRODES, COATED, ALLOY, CORROSION AND HEAT RESISTANT Nickel Base - 15Cr - 9Fe
  • SAE AMS5684-1948 WELDING ELECTRODES, COATED, ALLOY, CORROSION AND HEAT RESISTANT Nickel Base - 16Cr - 9Fe
  • SAE AMS5605F-2013 Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate, 41.5Ni - 16Cr - 37Fe - 2.9Cb - 1.8Ti, Consumable Electrode or Vacuum Induction Melted, 1800 °F (982 °C) Solution Heat Treated
  • SAE AMS5889B-2001 Nickel Alloy, Corrosion and Heat Resistant, Sheet and Strip 54Ni 22Cr 12.5Co 9.0Mo 1.2Al Consumable Electrode or Vacuum Induction Melted Annealed
  • SAE AMS5889B-2006 Nickel Alloy, Corrosion and Heat Resistant, Sheet and Strip 54Ni - 22Cr - 12.5Co - 9.0Mo - 1.2Al Consumable Electrode or Vacuum Induction Melted Annealed
  • SAE AMS5889C-2015 Nickel Alloy, Corrosion and Heat Resistant, Sheet and Strip 54Ni - 22Cr - 12.5Co - 9.0Mo - 1.2Al Consumable Electrode or Vacuum Induction Melted Annealed
  • SAE AMS5586F-2001 Nickel Alloy, Corrosion and Heat Resistant, Welded Tubing 57Ni 19.5Cr 13.5Co 4.2Mo 2.9Ti 1.4Al 0.006B 0.08Zr Consumable Electrode or Vacuum Induction Melted, Annealed
  • SAE AMS5671-1965 ALLOY FORGINGS AND RINGS, CORROSION AND HEAT RESISTANT Nickel Base - 15.5Cr - 0.95(Cb + Ta) - 2.5Ti - 0.70Al - 7.0Fe Consumable Electrode or Vacuum Induction Melted
  • SAE AMS5889D-2022 Nickel Alloy, Corrosion and Heat Resistant, Sheet and Strip 54Ni - 22Cr - 12.5Co - 9.0Mo - 1.2Al Consumable Electrode or Vacuum Induction Melted Annealed
  • SAE AMS5704J-2008 Nickel Alloy, Corrosion and Heat Resistant, Forgings 57Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted 1825 to 1900 Degrees F (996 to 1038 Degrees C) Solution, Stabilization, and Precipitatio
  • SAE AMS5787-1956 WELDING ELECTRODES, COATED, ALLOY, CORROSION AND HEAT RESISTANT Nickel Base - 4.5Cr - 24.5Mo - 5.5Fe
  • SAE AMS2451/1-1998 Plating, Brush, Nickel General Purpose
  • SAE AMS2451/1A-2011 Plating, Brush, Nickel General Purpose
  • SAE AMS2451/1B-2022 Plating, Brush, Nickel General Purpose
  • SAE AMS5589D-2000 Nickel Alloy, Corrosion and Heat Resistant, Seamless Tubing 52.5Ni 19Cr 3.0Mo 5.1Cb 0.90Ti 0.50Al 18Fe Consumable Electrode or Vacuum Induction Melted, 1775°F (968°C), Solution Heat Treated
  • SAE AMS5887C-2009 Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings 54Ni 22Cr 12.5Co 9.0Mo 1.2Al Consumable Electrode or Vacuum Induction Melted Annealed
  • SAE AMS5887B-2006 Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings 54Ni - 22Cr - 12.5Co - 9.0Mo - 1.2Al Consumable Electrode or Vacuum Induction Melted Annealed
  • SAE AMS5684B-1956 WELDING ELECTRODES, COATED, ALLOT, CORROSION AND HEAT RESISTANT Nickel Base - 15Cr - 9Fe - 2(Cb+Ta)
  • SAE AMS5677-1953 WELDING ELECTRODES, COATED, ALLOY, CORROSION AND HEAT RESISTANT Nickel Base - 19.5Cr - 1.6(Cb+Ta)
  • SAE AMS5605E-2006 Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 41.5Ni - 16Cr - 37Fe - 2.9Cb - 1.8Ti Consumable Electrode or Vacuum Induction Melted 1800 Degrees F (982 Degrees C) Solution Heat Treated UNS N09706
  • SAE AMS5966A-2003 Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 50Ni - 20Cr - 20Co - 5.9Mo - 2.2Ti - 0.45Al Consumable Electrode or Vacuum Induction Melted UNS N07263
  • SAE AMS5544J-2008 Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 57Ni - 19.5Cr - 13.5Co - 4.2Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted, Annealed UNS N07001
  • SAE AMS5887B-2001 Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings 54Ni 22Cr 12.5Co 9.0Mo 1.2Al Consumable Electrode or Vacuum Induction Melted Annealed
  • SAE AMS5586G-2012 Nickel Alloy, Corrosion and Heat-Resistant, Welded Tubing 57Ni - 19.5Cr - 13.5Co - 4.2Mo - 2.9Ti - 1.4Al - 0.006B - 0.08Zr Consumable Electrode Remelted or Vacuum Induction Melted, Annealed
  • SAE AMS5671B-1969 ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT RESISTANT Nickel Base - 15.5Cr - 0.95(Cb + Ta) - 2.5Ti - 0.70Al - 7.0Fe Consumable Electrode or Vacuum Induction Melted
  • SAE AMS5671A-1968 ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT RESISTANT Nickel Base - 15.5Cr - 0.95(Cb + Ta) - 2.5Ti - 0.70Al - 7.0Fe Consumable Electrode or Vacuum Induction Melted
  • SAE AMS5964-2018 Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire Ni - 18Cr - 2.8Mo - 5.5Cb(Nb) - 0.70Ti - 1.50Al - 10Fe - 9Co - 1W Consumable Electrode Remelted or Vacuum Induction Melted
  • SAE AMS5605D-2000 Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 41.5Ni 16Cr 37Fe 2.9Cb 1.8Ti Consumable Electrode or Vacuum Induction Melted, 1800°F (982°C) Solution Heat Treated
  • SAE AMS5544-1964 ALLOY SHEET, STRIP, AND PLATE, CORROSION AND HEAT RESISTANT Nickel Base - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al Consumable Electrode or Vacuum Induction Melted, Annealed
  • SAE AMS5598-1965 ALLOY SHEET, STRIP, AND PLATE, CORROSION AND HEAT RESISTANT Nickel Base - 15.5Cr - 0.95(Cb + Ta) - 2.6Ti - 0.70Al - 7.0Fe Consumable Electrode or Vacuum Induction Melted
  • SAE AMS5544A-1970 ALLOY SHEET, STRIP, AND PLATE, CORROSION AND HEAT RESISTANT Nickel Base - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al Consumable Electrode or Vacuum Induction Melted, Annealed
  • SAE ARP6253-2011 LEDs and Aircraft Applications
  • SAE AMS5799-1958 WELDING ELECTRODES, COATED, ALLOY, CORROSION AND HEAT RESISTANT Nickel Base - 22Cr - 1.5Co - 9Mo - 0.6W - 18.5Fe
  • SAE AMS5799A-1968 WELDING ELECTRODES, COATED, ALLOY, CORROSION AND HEAT RESISTANT Nickel Base - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18.5Fe
  • SAE AMS5586G-2007 Nickel Alloy, Corrosion and Heat-Resistant, Welded Tubing 57Ni - 19.5Cr - 13.5Co - 4.2Mo - 2.9Ti - 1.4Al - 0.006B - 0.08Zr Consumable Electrode Remelted or Vacuum Induction Melted, Annealed UNS N07001
  • SAE AMS5544B-1971 ALLOY SHEET, STRIP, AND PLATE, CORROSION AND HEAT RESISTANT Nickel Base - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr Consumable Electrode or Vacuum Induction Melted, Annealed
  • SAE AMS5751A-1964 ALLOY, CORROSION AND HEAT RESISTANT Nickel Base, 18Cr - 17Co - 4Mo - 3Ti - 3Al Solution, Stabilization, and Precipitation Treated Consumable Electrode or Vacuum Induction Melted
  • SAE AMS5779-1958 ALLOY WELDING ELECTRODES, COATED, CORROSION AND HEAT RESISTANT Nickel Base - 15Cr - (Cb+Ta) - 1.9Ti - 0.6Al
  • SAE AMS5854B-2010 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Wire, Forgings, and Rings, 61Ni 20.5Cr 8.5Mo 3.4Cb(Nb) 1.3Ti 5.0Fe, Consumable Electrode or Vacuum Induction Melted Solution Heat Treated
  • SAE AMS5709H-2008 Nickel Alloy, Corrosion and Heat-Resistant, Bars and Forgings 58Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted 1975 °F (1079 °C) Solution, Stabilization, and Precipitation Heat Treated UNS N
  • SAE AMS5841D-2000 Cobalt-Nickel Alloy, Corrosion and Heat Resistant, Bars 19Cr 36Co 25Ni 7.0Mo 0.50Cb 2.9Ti 0.20Al 9.0Fe Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated For Work Strengthening
  • SAE AMS5544H-2006 Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 57Ni - 19.5Cr - 13.5Co - 4.2Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted, Annealed
  • SAE AMS5544H-2001 Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 57Ni 19.5Cr 13.5Co 4.2Mo 3.0Ti 1.4Al 0.05Zr 0.006B Consumable Electrode or Vacuum Induction Melted, Annealed
  • SAE AMS5596-1964 ALLOY SHEET, STRIP, AND PLATE, CORROSION AND HEAT RESISTANT Nickel Base - 19Cr - 3.1Mo - 5.2(Cb + Ta) - 0.90Ti - 0.60Al Consumable Electrode or Vacuum Induction Melted, Annealed
  • SAE AMS5596A-1964 ALLOY SHEET, STRIP, AND PLATE, CORROSION AND HEAT RESISTANT Nickel Base - 19Cr - 3.1Mo - 5.2(Cb + Ta) - 0.90Ti - 0.60Al Consumable Electrode or Vacuum Induction Melted, Annealed
  • SAE AMS5544L-2020 Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 57Ni - 19.5Cr - 13.5Co - 4.2Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted, Annealed
  • SAE AMS5590E-2000 Nickel Alloy, Corrosion and Heat Resistant, Seamless Tubing 52.5Ni 19Cr 3.0Mo 5.1Cb 0.90Ti 0.50Al 18Fe Consumable Electrode or Vacuum Induction Melted 1950°F (1066°C) Solution Heat Treated
  • SAE AMS5841E-2006 Cobalt-Nickel Alloy, Corrosion and Heat Resistant, Bars 19Cr - 36Co - 25Ni - 7.0Mo - 0.50Cb - 2.9Ti - 0.20Al - 9.0Fe Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated for Work Strengthening UNS R30159
  • SAE AMS5964-2007 Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire Ni - 18Cr - 2.8Mo - 5.5Cb(Nb) - 0.70Ti - 1.50Al - 10Fe - 9Co - 1W Consumable Electrode Remelted or Vacuum Induction Melted UNS N07818
  • SAE AMS5872E-2012 Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 48Ni - 20Cr - 20Co - 5.9Mo - 2.2Ti - 0.45Al Consumable Electrode or Vacuum Induction Melted Solution Heat Treated
  • SAE AMS5872D-2000 Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 48Ni 20Cr 20Co 5.9Mo 2.2Ti 0.45Al Consumable Electrode or Vacuum Induction Melted Solution Heat Treated
  • SAE AMS5590E-2006 Nickel Alloy, Corrosion and Heat Resistant, Seamless Tubing 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1950 °F (1066 °C) Solution Heat Treated
  • SAE AMS5854A-2001 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Wire, Forgings, and Rings, 61Ni 20.5Cr 8.5Mo 3.4Cb 1.3Ti 5.0Fe, Consumable Electrode or Vacuum Induction Melted Solution Heat Treated
  • SAE AMS5589-1966 ALLOY TUBING, SEAMLESS, CORROSION AND HEAT RESISTANT Nickel Base - 19Cr - 3.1Mo - 5.1(Cb + Ta) - 0.90Ti - 0.50Al Consumable Electrode or Vacuum Induction Melted 1750 F (954.4 C) Solution Treated
  • SAE AMS5590-1966 ALLOY TUBING, SEAMLESS, CORROSION AND HEAT RESISTANT Nickel Base - 19Cr - 3.1Mo - 5.1(Cb + Ta) - 0.90Ti - 0.50Al Consumable Electrode or Vacuum Induction Melted 1950 F (1065.6 C) Solution Treated
  • SAE AMS5887E-2021 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, Rings, and Forging or Ring Stock 54Ni - 22Cr - 12.5Co - 9.0Mo - 1.2Al Consumable Electrode or Vacuum Induction Melted Annealed

AWS - American Welding Society, Nickel electrode application

  • A5.14-1983 SPECIFICATION FOR NICKEL AND NICKEL ALLOY BARE WELDING RODS AND ELECTRODES
  • A5.22-1980 SPECIFICATION FOR FLUX CORED CORROSION- RESISTING CHROMIUM AND CHROMIUM-NICKEL STEEL ELECTRODES
  • A5.9-1969 Specification for Corrosion-Resisting Chromium and Chromium-Nickel Steel Welding Rods and Bare Electrodes
  • A5.4-1981 SPECIFICATION FOR COVERED CORROSION- RESISTING CHROMIUM AND CHROMIUM- NICKEL STEEL WELDING ELECTRODES ERRATA - 1982
  • A5.11-1990 Specification for Nickel and Nickel Alloy Welding Electrodes for Shielded Metal Arc Welding
  • A5.11/A5.11M-1997 Specification for Nickel and Nickel-Alloy Welding Electrodes for Shielded Metal Arc Welding
  • A5.11/A5.11M-2005 Specification for Nickel and Nickel-Alloy Welding Electrodes for Shielded Metal Arc Welding

SE-SIS, Nickel electrode application

PH-BPS, Nickel electrode application

  • PNS ISO 14172:2021 Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification

Jiangxi Provincial Standard of the People's Republic of China, Nickel electrode application

  • DB36/T 690-2012 Hydrogen Storage Alloy Powder for Nickel Metal Hydride Battery Anode Material
  • DB36/T 816-2014 AB3 type hydrogen storage alloy powder for nickel metal hydride battery anode material

United States Navy, Nickel electrode application

Association of German Mechanical Engineers, Nickel electrode application

Association Francaise de Normalisation, Nickel electrode application

  • NF A81-332*NF EN ISO 18274:2011 Welding consumables - Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys - Classification
  • NF EN ISO 12153:2022 Produits consommables pour le soudage - Fils-électrodes fourrés pour soudage à l'arc avec ou sans gaz de protection du nickel et des alliages de nickel - Classification
  • NF EN 120005:1992 Spécification particulière cadre : photodiodes, réseaux de photodiodes (Non destinées aux applications pour les fibres optiques}
  • NF A81-349:2008 Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification.
  • NF C93-120-005*NF EN 120005:1992 Blank detail specification : photodiodes, photodiode arrays (not intended for fibre optic applications)
  • NF A82-116:2021 Resistance welding - Locking tapers for electrode holders and electrode caps
  • NF UTE C71-806:2007 Règles applicables pour l'utilisation de batteries NiMh dans les blocs autonomes d'éclairage de sécurité
  • NF M60-200:2010 Determination of the characteristic limits (decision threshold, detection limit and limits of the confidence interval) for measurements of ionizing radiation - Fundamentals and application.
  • NF EN IEC 63218:2021 Accumulateurs alcalins et autres accumulateurs à électrolyte non acide - Accumulateurs et batteries d'accumulateurs lithium, nickel cadmium et nickel métal hydrure pour applications portables - Recommandations relatives aux aspects environnementaux
  • NF EN ISO 20168:2021 Soudage par résistance - Cônes de serrage pour porte-électrodes et pointes d'électrodes
  • UTE C71-806U*UTE C71-806:2007 Applicable rules for NiMh batteries use into the self contained luminaire for emergency escape route lighting
  • NF C58-693*NF EN 60993:2003 Electrolyte for vented nickel-cadmium cells.
  • NF C58-618*NF EN IEC 63218:2021 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium, nickel cadmium and nickel-metal hydride cells and batteries for portable applications - Guidance on environmental aspects
  • NF EN IEC 63115-2:2021 Accumulateurs alcalins et autres accumulateurs à électrolyte non acide - Accumulateurs étanches au nickel-métal hydrure destinés à l'utilisation dans les applications industrielles - Partie 2 : sécurité
  • NF EN IEC 63115-1:2020 Accumulateurs alcalins et autres accumulateurs à électrolyte non acide - Accumulateurs étanches au nickel-métal hydrure destinés à l'utilisation dans des applications industrielles - Partie 1 : performances

Group Standards of the People's Republic of China, Nickel electrode application

  • T/ZZB 1912-2020 Nickel powder for electrode of multi-layer ceramic capacitor
  • T/JSQA 011-2020 ERNiCrFe-7G nickel-based welding wire for gas tungsten arc welding
  • T/ZZB 2407-2021 Nickel cobalt manganese composite hydroxide applied in single crystal cathode material
  • T/CECA 22-2017 Electrode foil for aluminum electrolytic capacitor
  • T/QGCML 1464-2023 Electrophoresis tank for cathodic electrophoresis coating

ES-UNE, Nickel electrode application

  • UNE-EN 120005:1992 BDS: PHOTODIODES, PHOTODIODE ARRAYS (NOT INTENDED FOR FIBRE OPTIC APPLICATIONS). (Endorsed by AENOR in September of 1996.)
  • UNE-EN 120006:1992 BDS: PIN-PHOTODIODES FOR FIBRE OPTIC APPLICATIONS. (Endorsed by AENOR in September of 1996.)
  • UNE-EN IEC 63218:2021 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium, nickel cadmium and nickel-metal hydride cells and batteries for portable applications - Guidance on environmental aspects (Endorsed by Asociación Esp...
  • SAE AMS5590G-2023 Nickel Alloy, Corrosion- and Heat-Resistant, Seamless Tubing 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1950 °F (1066 °C) Solution Heat Treated

(U.S.) Ford Automotive Standards, Nickel electrode application

  • FORD WSD-M6A107-A1-2003 PLATINUM/NICKEL ALLOY, ELECTRODE ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSD-M6A105-A-2003 NICKEL, CHROMIUM, MANGANESE AND SILICON ALLOYED ELECTRODE ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSD-M6A105-A4-2003 NICKEL, CHROMIUM AND IRON ALLOYED ELECTRODE ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSD-M6A105-A3-2003 NICKEL, MANGANESE AND SILICON ALLOYED ELECTRODE ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M21P44-A3-2004 CORROSION PROTECTIVE COATING, ZINC NICKEL ALLOY, TRIVALENT PASSIVATE WITH CATHODIC ELECTROCOAT, BLACK ***TO BE USED WITH FORD WSS-M99P1111-A***

SAE - SAE International, Nickel electrode application

  • SAE AMS3144-2012 Primer@ Anodic Electrodeposition for Aircraft Applications
  • SAE AMS2424D-1993 Plating@ Nickel Low-Stressed Deposit
  • SAE AMS5660-1959 ALLOY@ CORROSION AND HEAT RESISTANT Nickel Base - 12.5Cr - 6Mo - 2.6Ti - 34Fe Consumable Electrode or Vacuum Induction Melted
  • SAE AMS4732-1970 COPPER-NICKEL ALLOY WIRE AND RIBBON 78Cu - 22Ni For Electronic Applications
  • SAE AMS4731-1970 NICKEL-COPPER ALLOY WIRE AND RIBBON 67Ni - 30Cu For Electronic Applications
  • SAE AMS5966-1997 Nickel Alloy@ Corrosion and Heat Resistant@ Welding Wire 50Ni-20Cr-20Co-5.9Mo-2.2Ti-0.45Al Consumable Electrode or Vacuum Induction Melted (UNS N07263)
  • SAE AMS5669-1985 Alloy Bars@ Corrosion and Heat Resistant Nickel Base - 15.5Cr - 0.95 (Cb+Ta) - 2.5Ti - 0.70Al - 7.0Fe Consumable Electrode or Vacuum Induction Melted
  • SAE AMS5832E-1995 Nickel Alloy@ Corrosion and Heat Resistant@ Welding Wire 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted (UNS N07718)
  • SAE AMS2451/3A-2006 Plating@ Brush@ Nickel Low Stress@ Low-Hardness Deposit
  • SAE AMS2451/3C-2017 Plating@ Brush@ Nickel Low Stress@ Low-Hardness Deposit
  • SAE AMS2451/3B-2016 Plating@ Brush@ Nickel Low Stress@ Low-Hardness Deposit
  • SAE AMS2403M-2015 Plating@ Nickel General Purpose
  • SAE AMS2451/7B-2017 Plating@ Brush@ Nickel Low Stress@ Medium-Hardness Deposit
  • SAE AMS5832H-2015 Nickel Alloy@ Corrosion and Heat Resistant@ Welding Wire 52.5Ni - 19Cr - 3.0Mo - 5.1Cb(Nb) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted (UNS N07718)
  • SAE AMS5832G-2010 Nickel Alloy@ Corrosion and Heat Resistant@ Welding Wire 52.5Ni - 19Cr - 3.0Mo - 5.1Cb(Nb) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted (UNS N07718)
  • SAE AMS5605G-2019 Nickel Alloy@ Corrosion and Heat Resistant@ Sheet@ Strip@ and Plate 41.5Ni - 16Cr - 37Fe - 2.9Cb (Nb) - 1.8Ti Consumable Electrode or Vacuum Induction Melted 1800 °F (982 °C) Solution Heat Treated (UNS N09706)
  • SAE AMS5889A-1995 Nickel Alloy@ Corrosion and Heat Resistant@ Sheet and Strip 54Ni - 22Cr - 12.5Co - 9.0Mo - 1.2Al Consumable Electrode or Vacuum Induction Melted Annealed (UNS N06617)
  • SAE AMS5586E-1995 Nickel Alloy@ Corrosion and Heat Resistant@ Welded Tubing 57Ni - 19.5Cr - 13.5Co - 4.2Mo - 2.9Ti - 1.4Al - 0.006B - 0.08Zr Consumable Electrode or Vacuum Induction Melted@ Annealed (UNS N07001)
  • SAE AMS5889C-2010 Nickel Alloy@ Corrosion and Heat Resistant@ Sheet and Strip 54Ni - 22Cr - 12.5Co - 9.0Mo - 1.2Al Consumable Electrode or Vacuum Induction Melted Annealed (UNS N06617)
  • SAE AMS5544G-1991 Alloy@ Corrosion and Heat Resistant@ Sheet@ Strip@ and Plate 57 Ni - 19.5Cr - 13.5Co - 4.2Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted@ Annealed
  • SAE AMS5887D-2015 Nickel Alloy@ Corrosion and Heat-Resistant@ Bars@ Forgings@ and Rings 54Ni - 22Cr - 12.5Co - 9.0Mo - 1.2Al Consumable Electrode or Vacuum Induction Melted Annealed (UNS N06617)
  • SAE ARP6253A-2017 LEDs and Aircraft Applications
  • SAE AMS5586H-2019 Nickel Alloy@ Corrosion and Heat-Resistant@ Welded Tubing 57Ni - 19.5Cr - 13.5Co - 4.2Mo - 2.9Ti - 1.4Al - 0.006B - 0.08Zr Consumable Electrode Remelted or Vacuum Induction Melted@ Annealed (UNS N07001)
  • SAE AMS5841C-1994 Alloy@ Corrosion and Heat Resistant@ Bars 19Cr - 36Co - 25Ni - 7.0Mo - 0.50Cb - 2.9Ti - 0.20Al - 9.0Fe Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated for Work Strengthening (UNS R30159)
  • SAE AMS5887A-1995 Nickel Alloy@ Corrosion and Heat Resistant@ Bars Bars@ Forgings and Rings 54Ni - 22Cr - 12.5Co - 9.0Mo - 1.2Al Consumable Electrode or Vacuum Induction Melted Annealed (UNS N06617)
  • SAE AMS5662A-1966 ALLOY BARS@ FORGINGS@ AND RINGS@ CORROSION AND HEAT RESISTANT Nickel Base - 19Cr - 3.1Mo - 5.1(Cb + Ta) - 0.90Ti - 0.50Al Consumable Electrode or Vacuum Induction Melted@ Solution Treated
  • SAE AMS5662-1965 ALLOY BARS@ FORGINGS@ AND RINGS@ CORROSION AND HEAT RESISTANT Nickel Base - 19Cr - 3.1Mo - 5.1(Cb + Ta) - 0.90Ti - 0.50Al Consumable Electrode or Vacuum Induction Melted@ Solution Treated
  • SAE AMS5544K-2014 Nickel Alloy@ Corrosion and Heat-Resistant@ Sheet@ Strip@ and Plate 57Ni - 19.5Cr - 13.5Co - 4.2Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted@ Annealed (UNS N07001)

KR-KS, Nickel electrode application

  • KS B ISO 18274-2019 Welding consumables — Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys — Classification

International Organization for Standardization (ISO), Nickel electrode application

  • ISO 18274:2004 Welding consumables - Wire and strip electrodes, wires and rods for arc welding of nickel and nickel alloys - Classification
  • ISO 14172:2003/Cor 1:2004 Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification; Technical Corrigendum 1
  • ISO 18274:2004/Cor 2:2006 Welding consumables - Wire and strip electrodes, wires and rods for fusion welding of nickel and nickel alloys - Classification; Technical Corrigendum 2
  • ISO 18274:2004/Cor 1:2005 Welding consumables - Wire and strip electrodes, wires and rods for fusion welding of nickel and nickel alloys - Classification; Technical Corrigendum 1
  • ISO 7527:1985 Nickel, ferronickel and nickel alloys; Determination of sulfur content; Iodimetric titration method after induction furnace combustion
  • ISO 7524:1985 Nickel, ferronickel and nickel alloys; determination of carbon content; infra-red absorption method after induction furnace combustion
  • ISO 7526:1985 Nickel, ferronickel and nickel alloys; Determination of sulfur content; Infra-red absorption method after induction furnace combustion
  • ISO 11929-4:2022 Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation — Fundamentals and application — Part 4: Gui
  • ISO 20168:2016 Resistance welding - Locking tapers for electrode holders and electrode caps
  • ISO 24598:2019 Welding consumables — Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of creep-resisting steels — Classification

European Committee for Standardization (CEN), Nickel electrode application

  • EN ISO 18274:2010 Welding consumables - Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys - Classification (ISO 18274:2010)
  • EN 27527:1991 Nickel, Ferronickel and Nickel Alloys - Determination of Sulfur Content - Iodimetric Titration Method After Induction Furnace Combustion
  • EN ISO 20168:2021 Resistance welding - Locking tapers for electrode holders and electrode caps (ISO 20168:2016)
  • EN 27526:1991 Nickel, Ferronickel and Nickel Alloys - Determination of Sulfur Content - Infra-Red Absorption Method After Induction Furnace Combustion
  • EN ISO 18274:2023 Welding consumables - Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys - Classification (ISO 18274:2023)

European Standard for Electrical and Electronic Components, Nickel electrode application

  • EN 120005:1992 Blank detail specification: photodiodes, photodiode-arrays (not intended for fibre optic applications)

Lithuanian Standards Office , Nickel electrode application

  • LST EN 120005-2001 Blank detail specification. Photodiodes, photodiode-arrays (not intended for fibre optic applications)

German Institute for Standardization, Nickel electrode application

  • DIN EN 120005:1996-11 Blank detail specification - Photodiodes, photodiode-arrays (not intended for fibre optic applications); German version EN 120005:1992
  • DIN EN 27527:1992 Nickel, ferronickel and nickel alloys; determination of sulfur content; iodimetric titration method after induction furnace combustion (ISO 7527:1985); german version EN 27527:1991
  • DIN EN 27526:1992 Nickel, ferronickel and nickel alloys; determination of sulfur content; infra-red absorption method after induction furnace combustion (ISO 7526:1985); german version EN 27526:1991
  • DIN ISO 11929:2011 Determination of the characteristic limits (decision threshold, detection limit and limits of the confidence interval) for measurements of ionizing radiation - Fundamentals and application (ISO 11929:2010)
  • DIN 30676:1985 Design and application of cathodic protection of external surfaces
  • DIN 50970:1995 Electroplated coatings - Nickel chemicals for nickel baths - Requirements and testing
  • DIN EN ISO 18274:2023-09 Welding consumables - Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys - Classification (ISO 18274:2023); German version EN ISO 18274:2023

American Society for Testing and Materials (ASTM), Nickel electrode application

  • ASTM B559-93(1998)e1 Standard Specification for Nickel-Coated, Copper-Clad Steel Wire for Electronic Application
  • ASTM B343-92a(1998) Standard Practice for Preparation of Nickel for Electroplating with Nickel
  • ASTM B343-92a(2020) Standard Practice for Preparation of Nickel for Electroplating with Nickel
  • ASTM F1684-06(2016) Standard Specification for Iron-Nickel and Iron-Nickel-Cobalt Alloys for Low Thermal Expansion Applications
  • ASTM B972-10(2020)e1 Standard Specification for Nickel-Coated Braid and Ribbon Flat Copper Wire Intended for use in Electronic Application
  • ASTM F4-66(2005) Standard Specification for Carbonized Nickel Strip and Carbonized Nickel-Plated and Nickel-Clad Steel Strip for Electron Tubes
  • ASTM A608/A608M-02 Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures
  • ASTM A608-91a(1998) Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures
  • ASTM A608/A608M-14(2018) Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures
  • ASTM A608/A608M-20 Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures
  • ASTM B343-92a(2004)e1 Standard Practice for Preparation of Nickel for Electroplating with Nickel
  • ASTM B343-92a(2009) Standard Practice for Preparation of Nickel for Electroplating with Nickel
  • ASTM F1-03 Standard Specification for Nickel-Clad and Nickel-Plated Steel Strip for Electron Tubes
  • ASTM B343-92a(2014) Standard Practice for Preparation of Nickel for Electroplating with Nickel
  • ASTM B893-98 Specification for Hard-Coat Anodizing of Magnesium for Engineering Applications
  • ASTM B893-98(2003) Specification for Hard-Coat Anodizing of Magnesium for Engineering Applications
  • ASTM B559-93(2002)e1 Standard Specification for Nickel-Coated, Copper-Clad Steel Wire for Electronic Application
  • ASTM B558-79(2003) Standard Practice for Preparation of Nickel Alloys for Electroplating
  • ASTM B559-93(2007) Standard Specification for Nickel-Coated, Copper-Clad Steel Wire for Electronic Application
  • ASTM A358/A358M-04 Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications
  • ASTM A358/A358M-05 Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications
  • ASTM A358/A358M-95ae1 Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Alloy Steel Pipe for High-Temperature Service
  • ASTM A358/A358M-19 Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications
  • ASTM A358/A358M-08 Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications
  • ASTM A358/A358M-15 Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications

US-FCR, Nickel electrode application

  • FCR NE-M-1-11T-1981 NICKEL AND NICKEL-ALLOY BARE WELDING RODS AND ELECTRODES (ASME SFA-5.14 WITH ADDITIONAL REQUIREMENTS) (INACTIVE FOR NEW DESIGN)
  • FCR NE-M-1-19T-1981 NICKEL-CHROMIUM-MOLYBDENUM-COLUMBIUM BARE WELDING RODS AND ELECTRODES (INACTIVE FOR NEW DESIGN)

Professional Standard - Non-ferrous Metal, Nickel electrode application

  • YS/T 484-2005 Method for measuring the discharge capacity of the hydrogen storage alloys as the negative electrode of the metal hydride-nickel battery
  • YS/T 411-1998 The measuring method of CO2 reaction of anode carbon,anode paste for aluminium electrolysis
  • YS/T 877-2013 Nickel-plated shell for rechargeable battery
  • YS/T 284-1998 Anode paste for aluminium electrolysis
  • YS/T 65-2007 Cathodic pastes for aluminium electrolysis
  • YS/T 65-2012 Cathodic pastes for aluminium electrolysis
  • YS/T 65-1993 Cathode Paste for Aluminum Electrolysis
  • YS/T 1002-2014 Calculation method of anode effect frequency and anode effect duration for aluminum electrolysis
  • YS/T 908-2013 Nickel and nickel alloy sheet, strip and rods for vacuum electron devices
  • YS/T 285-2012 Prebaked anode for aluminium electrolysis
  • YS/T 611-2006 Electrode paste used for PTC ceramic
  • YS/T 285-1998 Anode carbon for aluminium electrolysis
  • YS/T 285-2007 Prebaked anode for aluminium electrolysis

YU-JUS, Nickel electrode application

  • JUS H.Z1.180-1985 Testing of industrial vvaters. Determination of nickel content. Polarographic method
  • JUS C.A1.704-1987 Nickel metal, feronickel and nickel alloys. Determination of sulfur content. lodimetric titration method after induction furnace combustion

AT-ON, Nickel electrode application

  • ONORM EN 27527-1992 Nickel, ferronickel and nickel alloys - Determination of sulfur content - lodimetric titration method after induction furnace combustion
  • ONORM EN 27526-1992 Nickel, ferronickel and nickel alloys - Determination of sulfur content - Infra-red absorption method after induction furnace combustion

ECIA - Electronic Components Industry Association, Nickel electrode application

  • 495-A-1990 Film Dielectric Capacitors with Metallized Paper Electrodes for Alternating Current Applications
  • 495-A-1989 Film Dielectric Capacitors with Metallized Paper Electrodes for Alternating Current Applications
  • 535ABAE-1987 Fixed Tantalum Capacitors with Non-Solid Electrolyte and Porous Anode Silver Case@ Axial Lead@ Elastomeric Seal@ Polarized@ Nickel Positive@ Copper Negative Leads@ Insulated
  • 395-1-1975 Polarized Aluminum Electrolytic Capacitors for Long Life (Type 1) and for General Purpose Application (Type 2) (ANSI C83.22A-75)

GM North America, Nickel electrode application

Professional Standard - Electron, Nickel electrode application

  • SJ 20912-2004 Metal Overlay Low Stress Nickel Plating
  • SJ 1541-1987 Nickel and Nickel alloy strips for vacuum tubes
  • SJ 1540-1987 Nickel and Nickel alloy wires for use in vacuum devices
  • SJ 1539-1987 Nickel and Nickel alloy bars for vacuum tubes
  • SJ 20152-1992 Specification for nickel rars and nickel wires for electron devices
  • SJ 1538-1987 Compositions of Nickel and Nickel alloy for vacuum tubes
  • SJ/T 11140-1997 Electrode foil for aluminum electrolytic capacitor
  • SJ/T 11140-2012 Electrode foil for aluminum electrolytic capacitor
  • SJ/T 11140-2022 Electrode foil for aluminum electrolytic capacitors
  • SJ/T 10677-1995 Nickel oxide powder for electronic industry
  • SJ 20151-1992 Specification for nickel strips for electron devices
  • SJ 2354.6-1983 Method of measurement for responsivity of PIN and avalanche photodiodes
  • SJ 1543-1988 Method for spectral analysis of Nickel and Nickel aloy for vacuum tubes
  • SJ 1542-1987 Method for chemical analysis of Nickel and Nickel alloy for vacuum tubes

International Telecommunication Union (ITU), Nickel electrode application

  • ITU-T L.71-2008 Design, construction, and installation of network cables for broadband access including metallic networks connected to optical fibre networks (Study Group 6)
  • ITU-T L.7 FRENCH-1988 Application of Joint Cathodic Protection
  • ITU-T L.7 SPANISH-1988 Application of Joint Cathodic Protection

International Electrotechnical Commission (IEC), Nickel electrode application

  • IEC 62973-2:2020 Railway applications - Rolling stock - Batteries for auxiliary power supply systems - Part 2: Nickel Cadmium (NiCd) batteries
  • IEC 62973-4:2021 Railway applications - Rolling stock - Batteries for auxiliary power supply systems - Part 4: Secondary sealed nickel-metal hydride batteries
  • IEC 60993:1989 Electrolyte for vented nickel-cadmium cells
  • IEC 63218:2021 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium, nickel cadmium and nickel-metal hydride cells and batteries for portable applications - Guidance on environmental aspects
  • IEC 62116:2008 Test procedure of islanding prevention measures for utility-interconnected photovoltaic inverters

Institute of Electrical and Electronics Engineers (IEEE), Nickel electrode application

  • IEEE Std 1115-2000 IEEE Recommended Practice for Sizing Nickel-Cadmium Batteries for Stationary Applications
  • IEEE Std 1115-1992 IEEE Recommended Practice for Sizing Nickel-Cadmium Batteries for Stationary Applications
  • IEEE P1115/D4, July 2013 IEEE Draft Recommended Practice for Sizing Nickel-Cadmium Batteries for Stationary Applications
  • IEEE Std 1115-2014 IEEE Recommended Practice for Sizing Nickel-Cadmium Batteries for Stationary Applications - Redline
  • P1115/D4, July 2013 IEEE Draft Recommended Practice for Sizing Nickel-Cadmium Batteries for Stationary Applications
  • IEEE P1115/D6, June 2013 IEEE Approved Draft Recommended Practice for Sizing Nickel-Cadmium Batteries for Stationary Applications

Professional Standard - Aviation, Nickel electrode application

  • HB/Z 5089.1-2004 Methods for analysis of plating black nickel solutions Part 1:Determination of ammonium nickel sulfate content by ion selective electrode method

Taiwan Provincial Standard of the People's Republic of China, Nickel electrode application

IECQ - IEC: Quality Assessment System for Electronic Components, Nickel electrode application

  • QC 300202/US 0005-1985 Specifications for Use in Electronic Equipment: Detail Specification: Fixed Tantalum Capacitors with Non-Solid Electrolyte and Porous Anode; Silver Case@ Axial Lead@ Elastomeric Seal@ Polarized@ Nickel Positive@ Copper Negative Leads Insulated

Professional Standard - Aerospace, Nickel electrode application

  • QJ 1158-1987 Application dimensions of smooth limit gauges for shafts
  • QJ 444-1984 Application dimensions for smooth limit gauges for bores

Professional Standard - Chemical Industry, Nickel electrode application

American Welding Society (AWS), Nickel electrode application

  • WRC 278:1982 The Crack Arrest Properties of 9% Nickel Steels for Cryogenic Applications
  • AWS A5.13-2000 Specification for Surfacing Electrodes for Shielded Metal Arc Welding
  • AWS A5.5/A5.5M-2006 Specification for Low-Alloy Steel Electrodes for Shielded Metal Arc Welding
  • AWS A5.11/A5.11M-1997 Specification for Nickel and Nickel-Alloy Welding Electrodes for Shielded Metal Arc Welding

未注明发布机构, Nickel electrode application

  • SAE AMS5589G-2019 Nickel Alloy, Corrosion and Heat Resistant, Seamless Tubing 52.5Ni 19Cr 3.0Mo 5.1Cb 0.90Ti 0.50Al 18Fe Consumable Electrode or Vacuum Induction Melted, 1775°F (968°C), Solution Heat Treated
  • SAE AMS5596M-2017 ALLOY SHEET, STRIP, AND PLATE, CORROSION AND HEAT RESISTANT Nickel Base - 19Cr - 3.1Mo - 5.2(Cb + Ta) - 0.90Ti - 0.60Al Consumable Electrode or Vacuum Induction Melted, Annealed
  • SAE AMS5662N-2016 ALLOY BARS@ FORGINGS@ AND RINGS@ CORROSION AND HEAT RESISTANT Nickel Base - 19Cr - 3.1Mo - 5.1(Cb + Ta) - 0.90Ti - 0.50Al Consumable Electrode or Vacuum Induction Melted@ Solution Treated
  • SAE AMS5662P-2022 ALLOY BARS@ FORGINGS@ AND RINGS@ CORROSION AND HEAT RESISTANT Nickel Base - 19Cr - 3.1Mo - 5.1(Cb + Ta) - 0.90Ti - 0.50Al Consumable Electrode or Vacuum Induction Melted@ Solution Treated
  • BS 7310:1990(2012) Specification for Ion - selective electrodes, reference electrodes, combination electrodes and ion - selective electrode meters for determination of ions in solution

Standard Association of Australia （SAA）, Nickel electrode application

  • AS 2203.1:1990 Cored electrodes for arc welding Part 1: Ferritic steel electrodes

WRC - Welding Research Council, Nickel electrode application

  • BULLETIN 68-1961 A COATED ELECTRODE FOR FUSION WELDING AISI 4340 STEEL FOR ULTRA HIGH STRENGTH APPLICATIONS@ METHOD FOR DETERMINING THE TOTAL WATER IN WELDING ELECTRODE COATINGS
  • BULLETIN 278-1982 THE CRACK ARREST PROPERTIES OF 9% NICKEL STEELS FOR CRYOGENIC APPLICATIONS

National Electrical Manufacturers Association（NEMA), Nickel electrode application

  • NEMA C78.374-2015 Electric Lamps - Light-Emitting Diode Package Specification Sheet for General Illumination Applications
  • NEMA C50.12-1982 Requirements for Salient-Pole Synchronous Generators and Generator/Motors for Hydraulic Turbine Applications R(1989)

Shandong Provincial Standard of the People's Republic of China, Nickel electrode application

  • DB37/T 2751-2016 General technical requirements for high-pressure compacted nickel-cobalt lithium manganese oxide cathode materials

Hunan Provincial Standard of the People's Republic of China, Nickel electrode application

CL-INN, Nickel electrode application

RO-ASRO, Nickel electrode application

PL-PKN, Nickel electrode application

Electronic Components, Assemblies and Materials Association, Nickel electrode application

  • ECA 535ABAE-1987 Fixed Tantalum Capacitors with Non-Solid Electrolyte and Porous Anode Silver Case, Axial Lead, Elastomeric Seal, Polarized, Nickel Positive, Copper Negative Leads, Insulated
  • ECA 395-1971 Polarized Aluminum Electrolytic Capacitors for Long Life (Type 1) and for General Purpose Application (Type 2) (Revision of RS-154-B and RS-205) Correction - March 1972
  • ECA 395-1-1975 Polarized Aluminum Electrolytic Capacitors for Long Life (Type 1) and for General Purpose Application (Type 2) ANSI C83.22A-75

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Nickel electrode application

ZA-SANS, Nickel electrode application

  • SANS 999:2007 Anodized coatings on aluminium (for architectural applications)

HU-MSZT, Nickel electrode application

Professional Standard - Medicine, Nickel electrode application

Professional Standard - Ferrous Metallurgy, Nickel electrode application

中国有色金属工业总公司, Nickel electrode application

  • YS 65-1993 Cathode paste for aluminum electrolysis

BE-NBN, Nickel electrode application

National Association of Corrosion Engineers (NACE), Nickel electrode application

  • NACE RP0186-2001 Application of Cathodic Protection for External Surfaces of Steel Well Casings

Professional Standard - Machinery, Nickel electrode application

Danish Standards Foundation, Nickel electrode application

  • DS/EN IEC 63218:2021 Secondary cells and batteries containing alkaline or other non-acid electrolytes – Secondary lithium, nickel cadmium and nickel-metal hydride cells and batteries for portable applications – Guidance on environmental aspects

  Nickel electrode, nickel electrode, nickel electrode, Nickel gold electrode, Platinum Electrode Nickel Electrode, Nickel electrode potential, Ni electrode potential, Metal Nickel Electrode, Platinum Nickel Electrode, Nickel counter electrode, nickel metal electrode, Nickel electrode application, Ni electrode potential, Nickel gold electrode, Nickel working electrode, Nickel + electrode +, Nickel electrode+, Nickel inner electrode, Nickel working electrode, Nickel application.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved