ZH
RU
ES
Grooved pin
Grooved pin, Total:265 items.
In the international standard classification, Grooved pin involves: Fasteners, Chipless working equipment.
AT-ON, Grooved pin
European Committee for Standardization (CEN), Grooved pin
- EN 28746:1992 Grooved pins with round head (ISO 8746:1986)
- EN 28747:1992 Grooved pins with countersunk head (ISO 8747:1986)
- EN 28739:1992 Grooved pins; full-length parallel grooved; with pilot (ISO 8739:1986)
- EN 28744:1992 Grooved pins; full-length taper grooved (ISO 8744:1986)
- EN 28740:1992 Grooved pins; full-length parallel grooved, with chamfer (ISO 8740:1986)
- EN 28741:1992 Grooved pins; half-length reverse taper grooved (ISO 8741:1986)
- EN 28745:1992 Grooved pins; half-length taper grooved (ISO 8745:1986)
- EN 28742:1992 Grooved pins; third-length centre grooved (ISO 8742:1986)
- EN 28743:1992 Grooved pins; half-length centre grooved (ISO 8743:1986)
- EN 28749:1992 Pins and grooved pins - Shear test (ISO 8749:1986)
- EN ISO 8744:1997 Grooved Pins - Full-Length Taper Grooved ISO 8744:1997; Supersedes EN 28744:1992
- EN ISO 8745:1997 Grooved Pins - Half-Length Taper Grooved ISO 8745:1997; Supersedes EN 28745:1992
- EN ISO 8741:1997 Grooved Pins - Half-Length Reverse-Taper Grooved ISO 8741:1997; Supersedes EN 28741:1992
- EN ISO 8743:1997 Grooved Pins - Half-Length Centre Grooved ISO 8743:1997; Supersedes EN 28743:1992
- EN ISO 8746:1997 Grooved Pins with Round Head ISO 8746:1997; Supersedes EN 28746:1992
- EN ISO 8747:1997 Grooved Pins with Countersunk Head ISO 8747:1997; Supersedes EN 28747:1992
- EN ISO 8742:1997 Grooved Pins - One-Third-Length Centre Grooved ISO 8742:1997; Supersedes EN 28742:1992
- EN ISO 8739:1997 Grooved Pins - Full-Length Parallel Grooved, with Pilot ISO 8739:1997; Supersedes EN 28739:1992
- EN ISO 8740:1997 Grooved Pins - Full-Length Parallel Grooved, with Chamfer Supersedes EN 28740:1992; ISO DIS 8740:1997
未注明发布机构, Grooved pin
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Grooved pin
Association Francaise de Normalisation, Grooved pin
German Institute for Standardization, Grooved pin
- DIN EN ISO 8741:1998-03 Grooved pins - Half-length reverse-taper grooved (ISO 8741:1997); German version EN ISO 8741:1997
- DIN EN ISO 8741:1998 Grooved pins - Half-length reverse-taper grooved (ISO 8741:1997); German version EN ISO 8741:1997
- DIN EN ISO 8744:1998 Grooved pins - Full-length taper grooved (ISO 8744:1997); German version EN ISO 8744:1997
- DIN EN ISO 8743:1998 Grooved pins - Half-length centre grooved (ISO 8743:1997); German version EN ISO 8743:1997
- DIN EN ISO 8745:1998 Grooved pins - Half-length taper grooved (ISO 8745:1997); German version EN ISO 8745:1997
- DIN EN ISO 8742:1998 Grooved pins - One-third-length centre grooved (ISO 8742:1997); German version EN ISO 8742:1997
- DIN EN ISO 8740:1998 Grooved pins - Full-length parallel grooved, with chamfer (ISO 8740:1997); German version EN ISO 8740:1997
- DIN EN ISO 8739:1998 Grooved pins - Full-length parallel grooved, with pilot (ISO 8739:1997); German version EN ISO 8739:1997
- DIN EN ISO 8746:1998 Grooved pins with round head (ISO 8746:1997); German version EN ISO 8746:1997
- DIN EN ISO 8747:1998 Grooved pins with countersunk head (ISO 8747:1997); German version EN ISO 8747:1997
- DIN EN ISO 8747:1998-03 Grooved pins with countersunk head (ISO 8747:1997); German version EN ISO 8747:1997
- DIN EN ISO 8745:1998-03 Grooved pins - Half-length taper grooved (ISO 8745:1997); German version EN ISO 8745:1997
- DIN EN ISO 8744:1998-03 Grooved pins - Full-length taper grooved (ISO 8744:1997); German version EN ISO 8744:1997
- DIN 1469:2012-05 Grooved pins, half length grooved with gorge
- DIN EN ISO 8746:1998-03 Grooved pins with round head (ISO 8746:1997); German version EN ISO 8746:1997
- DIN EN 28749:1992 Determination of shear strength of pins (ISO 8749:1986); german version EN 28749:1992
- DIN EN ISO 8743:1998-03 Grooved pins - Half-length centre grooved (ISO 8743:1997); German version EN ISO 8743:1997
- DIN 1469:1978 Grooved Pins, Half Length Grooved with Gorge
- DIN EN ISO 8739:1998-03 Grooved pins - Full-length parallel grooved, with pilot (ISO 8739:1997); German version EN ISO 8739:1997
- DIN EN ISO 8740:1998-03 Grooved pins - Full-length parallel grooved, with chamfer (ISO 8740:1997); German version EN ISO 8740:1997
- DIN EN ISO 8742:1998-03 Grooved pins - One-third-length centre grooved (ISO 8742:1997); German version EN ISO 8742:1997
British Standards Institution (BSI), Grooved pin
BE-NBN, Grooved pin
International Organization for Standardization (ISO), Grooved pin
- ISO 8743:1986 Grooved pins; Half-length centre grooved
- ISO 8744:1986 Grooved pins; Full-length taper grooved
- ISO 8745:1986 Grooved pins; Half-length taper grooved
- ISO 8739:1986 Grooved pins; Full-length parallel grooved, with pilot
- ISO 8741:1986 Grooved pins; Half-length reverse taper grooved
- ISO/CD 8747:2023 Grooved pins with countersunk head
- ISO 8741:1997 Grooved pins - Half-length reverse-taper grooved
- ISO 8746:1986 Grooved pins with round head
- ISO 8747:1986 Grooved pins with countersunk head
- ISO/CD 8746:2023 Grooved pins with round head
- ISO 8740:1986 Grooved pins; Full length parallel grooved, with chamfer
- ISO 8742:1986 Grooved pins; Third-length centre grooved
- ISO 8749:1986 Pins and grooved pins; Shear test
- ISO/CD 8743 Fasteners — Grooved pins — Half-length center grooves
- ISO/DIS 8743:2023 Fasteners — Grooved pins — Half-length center grooves
- ISO 8742:1997 Grooved pins - One-third-length centre grooved
- ISO/CD 13669 Fasteners — Grooved pins — General requirements
- ISO/DIS 13669:2023 Fasteners — Grooved pins — General requirements
- ISO/CD 8744 Fasteners — Taper grooved pins — Full-length progressive grooves
- ISO/CD 13672 Fasteners — Parallel grooved pins — Half-length diamond grooves
- ISO/CD 8745 Fasteners — Taper grooved pins — Half-length progressive grooves
- ISO/CD 8741 Fasteners — Reverse-taper grooved pins — Half-length progressive grooves
- ISO/DIS 8744:2023 Fasteners — Taper grooved pins — Full-length progressive grooves
- ISO/DIS 8745:2023 Fasteners — Taper grooved pins — Half-length progressive grooves
- ISO/DIS 13672:2023 Fasteners — Parallel grooved pins — Half-length diamond grooves
- ISO/DIS 8741:2023 Fasteners — Reverse-taper grooved pins — Half-length progressive grooves
- ISO/DIS 8747:2023 Fasteners — Grooved pins with countersunk head — Full-length diamond grooves
- ISO/DIS 8746:2023 Fasteners — Grooved pins with round head — Full-length diamond grooves
- ISO/CD 8739 Fasteners — Parallel grooved pins, with pilot point — Full-length diamond grooves
- ISO/CD 8740 Fasteners — Parallel grooved pins, with chamfer point — Full-length diamond grooves
- ISO/DIS 8740:2023 Fasteners — Parallel grooved pins, with chamfer point — Full-length diamond grooves
- ISO/DIS 8739:2023 Fasteners — Parallel grooved pins, with pilot point — Full-length diamond grooves
- ISO/CD 8742 Fasteners — Grooved pins — One-third-length center grooves
- ISO/DIS 8742:2023 Fasteners — Grooved pins — One-third-length center grooves
- ISO/CD 13670 Fasteners — Reverse-taper grooved pins — One quarter-length progressive grooves on both sides
- ISO/DIS 13670:2023 Fasteners — Reverse-taper grooved pins — One quarter-length progressive grooves on both sides
Danish Standards Foundation, Grooved pin
NL-NEN, Grooved pin
SE-SIS, Grooved pin
Taiwan Provincial Standard of the People's Republic of China, Grooved pin
International Truck and Engine Corporation (ITEC), Grooved pin
Lithuanian Standards Office , Grooved pin
RU-GOST R, Grooved pin
Korean Agency for Technology and Standards (KATS), Grooved pin
AENOR, Grooved pin
ES-UNE, Grooved pin
Aerospace Industries Association, Grooved pin
American Society of Mechanical Engineers (ASME), Grooved pin
- ASME B18.8.2-1995 Taper pins, dowel pins, straight pins, grooved pins, and spring pins (Inch series)
- ASME B18.8.2-2000 Taper Pins, Dowel Pins, Straight Pins, Grooved Pins, and Spring Pins (Inch Series)
- ASME B18.8.2-1978 Taper pins, dowel pins, straight pins, grooved pins, and spring pins (Inch series)
- ASME B18.8.2-2020 Taper Pins, Dowel Pins, Straight Pins, Grooved Pins, and Spring Pins (Inch Series)
- ASME B18.8.100M-2001 Spring Pins: Coiled Type, Spring Pins: Slotted, Machine Dowel Pins: Hardened Ground, and Grooved Pins (Metric)
American National Standards Institute (ANSI), Grooved pin
- ANSI/ASME B18.8.2-2000 Taper Pins, Dowel Pins, Straight Pins, Grooved Pins And Spring Pins (Inch Series)
- ANSI/ASME B18.8.2-2020 Taper Pins, Dowel Pins, Straight Pins, Grooved Pins, and Spring Pins (Inch Series)
- ANSI/ASME B18.8.100M-2000 Spring Pins - Coiled Type, Spring Pins - Slotted, Machine Dowel Pins - Hardened Ground, and Grooved Pins (Metric Series)
PL-PKN, Grooved pin
Society of Automotive Engineers (SAE), Grooved pin
SAE - SAE International, Grooved pin
International Federation of Trucks and Engines, Grooved pin
ZA-SANS, Grooved pin
- SANS 1700-17-18:1998 Fasteners Part 17: Pins Section 18: Grooved pins with round head
- SANS 1700-17-19:1998 Fasteners Part 17: Pins Section 19: Grooved pins with countersunk head
- SANS 1700-17-16:1998 Fasteners Part 17: Pins Section 16: Grooved pins - Full-length taper grooved
- SANS 1700-17-17:1998 Fasteners Part 17: Pins Section 17: Grooved pins - Half-length taper grooved
- SANS 1700-17-13:1998 Fasteners Part 17: Pins Section 13: Grooved pins - Half-length reverse-taper grooved
- SANS 1700-17-14:1998 Fasteners Part 17: Pins Section 14: Grooved pins - One-third-length centre grooved
- SANS 1700-17-15:1998 Fasteners Part 17: Pins Section 15: Grooved pins - Half-length centre grooved
- SANS 1700-17-11:1998 Fasteners Part 17: Pins Section 11: Grooved pins - Full-length parallel grooved, with pilot
- SANS 1700-17-12:1998 Fasteners Part 17: Pins Section 12: Grooved pins - Full-length parallel grooved, with chamfer
- SANS 1700-6-4:1996 Fasteners Part 6: Testing and acceptance inspection Section 4: Pins and grooved pins - Shear test
AIA/NAS - Aerospace Industries Association of America Inc., Grooved pin
- NAS2013-1991 Collar@ Grooved@ Pin-Rivet@ Titanium@ (Composite Applications)
- NASM20700-1999 Pin@ Grooved@ Headless@ Longitudinal Groove