ZH

RU

ES

Standards for the detection of lead in water

Standards for the detection of lead in water, Total:500 items.

In the international standard classification, Standards for the detection of lead in water involves: Water quality, Paints and varnishes, Ferroalloys, Plastics, General methods of tests and analysis for food products, Leather technology, Environmental protection, Nuclear energy engineering, Microbiology, Soil quality. Pedology, Paint ingredients, Natural gas, Fuels, Structures of buildings, Construction materials, Metrology and measurement in general, Adhesives, Inorganic chemicals, Crude petroleum, Air quality, Non-ferrous metals, Quality, Construction industry, Lubricants, industrial oils and related products, Equipment for the chemical industry, Medical equipment, Non-destructive testing, Ceramics, Farming and forestry, Pipeline components and pipelines, Test conditions and procedures in general, Petroleum products in general, Organic chemicals, Bridge construction, Coals, Measurement of volume, mass, density, viscosity, Optics and optical measurements, Analytical chemistry, Products of the chemical industry, Textile fibres, Testing of metals, Road vehicles in general, Corrosion of metals, Environmental testing, Protection against fire, Measurement of fluid flow, Products of the textile industry, Wastes, Insulating materials.


PL-PKN, Standards for the detection of lead in water

  • PN C04595 ArkusZ00-1974 Water and waste water Tests for lead Introduction and scope of the standard
  • PN C04560 ArkusZ00-1974 Water and was?e water Tes?s for cadmium Introduction and scope of ?he standard
  • PN C04633-01-1987 Water and waste water Test for carbon Introduction and scope of the standard
  • PN C04627-01-1991 Water and waste water Tests for acrylonitrile Introduction and scope of the standard
  • PN C04639-01-1989 Water and waste water Tests for nitrobenzene Introduction and scopeof the standard
  • PN C04641-01-1989 Water and waste water Tests for aromatics hydrocarbons Introduction and scope of the standard
  • PN C87070-01-1992 Fertilizers Tests of arsenie, cadmium, lead and mercury in nitrogenous and phosphatic fertilizers General and scope of the standard

American Society for Testing and Materials (ASTM), Standards for the detection of lead in water

  • ASTM D7535-09e1 Standard Test Method for Lead-210 in Water
  • ASTM D3559-03 Standard Test Methods for Lead in Water
  • ASTM D3559-96 Standard Test Methods for Lead in Water
  • ASTM D3559-15 Standard Test Methods for Lead in Water
  • ASTM D3454-11 Standard Test Method for Radium-226 in Water
  • ASTM D3618-05(2015) Standard Test Method for Detection of Lead in Paint and Dried Paint Films
  • ASTM D7535-09 Standard Test Method for Lead-210 in Water
  • ASTM D7535-09(2015) Standard Test Method for Lead-210 in Water
  • ASTM D3618-85a(1999) Standard Test Method for Detection of Lead in Paint and Dried Paint Films
  • ASTM D3618-05(2022) Standard Test Method for Detection of Lead in Paint and Dried Paint Films
  • ASTM D361-65 Standard test method for lead content in paint and dry paint films
  • ASTM D4834-03(2021) Standard Test Method for Detection of Lead in Paint by Direct Aspiration Atomic Absorption Spectroscopy
  • ASTM E1753-04 Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films
  • ASTM D4834-03 Standard Test Method for Detection of Lead in Paint by Direct Aspiration Atomic Absorption Spectroscopy
  • ASTM D6018-96(2012) Standard Test Method for Determining the Presence of Lead Salts in Leather
  • ASTM D6018-96(2001) Standard Test Method for Determining the Presence of Lead Salts in Leather
  • ASTM D6018-96 Standard Test Method for Determining the Presence of Lead Salts in Leather
  • ASTM D6018-96(2006) Standard Test Method for Determining the Presence of Lead Salts in Leather
  • ASTM D6146-97(2002) Standard Guide for Monitoring Aqueous Nutrients in Watersheds
  • ASTM D6146-97 Standard Guide for Monitoring Aqueous Nutrients in Watersheds
  • ASTM D6146-97(2007) Standard Guide for Monitoring Aqueous Nutrients in Watersheds
  • ASTM D3618-05 Standard Test Method for Detection of Lead in Paint and Dried Paint Films
  • ASTM F2327-03 Standard Guide for Selection of Airborne Remote Sensing Systems for Detection and Monitoring of Oil on Water
  • ASTM F2327-08 Standard Guide for Selection of Airborne Remote Sensing Systems for Detection and Monitoring of Oil on Water
  • ASTM E1753-01 Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films
  • ASTM E1753-95 Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films
  • ASTM D1687-92 Standard Test Methods for Chromium in Water
  • ASTM D1687-92(1996) Standard Test Methods for Chromium in Water
  • ASTM D1068-03 Standard Test Methods for Iron in Water
  • ASTM D857-12 Standard Test Method for Aluminum in Water
  • ASTM D858-12 Standard Test Methods for Manganese in Water
  • ASTM D3866-18 Standard Test Methods for Silver in Water
  • ASTM F2327-21 Standard Guide for Selection of Airborne Remote Sensing Systems for Detection and Monitoring of Oil on Water
  • ASTM D8459-23 Standard Test Methods for Detecting Water Soluble Sulfates in Construction Soils
  • ASTM E2005-05 Standard Guide for Benchmark Testing of Reactor Dosimetry in Standard and Reference Neutron Fields
  • ASTM E1841-96 Standard Guide for Conducting Renewal Phytotoxicity Tests With Freshwater Emergent Macrophytes
  • ASTM E1841-04 Standard Guide for Conducting Renewal Phytotoxicity Tests With Freshwater Emergent Macrophytes
  • ASTM E1841-04(2012) Standard Guide for Conducting Renewal Phytotoxicity Tests With Freshwater Emergent Macrophytes
  • ASTM D6145-97 Standard Guide for Monitoring Sediment in Watersheds
  • ASTM D6145-97(2002) Standard Guide for Monitoring Sediment in Watersheds
  • ASTM D6145-97(2007) Standard Guide for Monitoring Sediment in Watersheds
  • ASTM C1475-05(2010)e1 Standard Guide for Determination of Neptunium-237 in Soil
  • ASTM E2271/E2271M-18 Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Multifamily Dwellings
  • ASTM D1292-86(1999) Standard Test Method for Odor in Water
  • ASTM D3223-91 Standard Test Method for Total Mercury in Water
  • ASTM D3223-17 Standard Test Method for Total Mercury in Water
  • ASTM D1688-17 Standard Test Methods for Copper in Water
  • ASTM D6303-98 Standard Test Method for Formaldehyde in Water
  • ASTM E1753-22 Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films
  • ASTM D2374-05 Standard Test Method for Lead in Paint Driers by EDTA Method
  • ASTM E361-99 Standard Test Methods for the Determination of Arsenic and Lead in Ferromanganese (Withdrawn 2005)
  • ASTM D4888-20 Standard Test Method for Water Vapor in Natural Gas Using Length-of-Stain Detector Tubes
  • ASTM D888-03 Standard Test Methods for Dissolved Oxygen in Water
  • ASTM D1426-03 Standard Test Methods for Ammonia Nitrogen In Water
  • ASTM D2036-06 Standard Test Methods for Cyanides in Water
  • ASTM D3866-02 Standard Test Methods for Silver in Water
  • ASTM D3866-92(1996) Standard Test Methods for Silver in Water
  • ASTM D3372-02(2007)e1 Standard Test Method for Molybdenum in Water
  • ASTM D3558-03 Standard Test Methods for Cobalt in Water
  • ASTM D3866-07 Standard Test Methods for Silver in Water
  • ASTM D3372-92(1996) Standard Test Method for Molybdenum in Water
  • ASTM D3372-02 Standard Test Method for Molybdenum in Water
  • ASTM D1253-03 Standard Test Method for Residual Chlorine in Water
  • ASTM D3373-03(2007)e1 Standard Test Method for Vanadium in Water
  • ASTM D3373-03 Standard Test Method for Vanadium in Water
  • ASTM D3859-03 Standard Test Methods for Selenium in Water
  • ASTM D1886-03 Standard Test Methods for Nickel in Water
  • ASTM D3113-92(1998) Standard Test Methods for Sodium Salts of EDTA in Water
  • ASTM D2374-85(1999) Standard Test Method for Lead in Paint Driers by EDTA Method
  • ASTM D3237-22 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
  • ASTM D5059-14 Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy
  • ASTM D2374-05(2011) Standard Test Method for Lead in Paint Driers by EDTA Method
  • ASTM E2006-05 Standard Guide for Benchmark Testing of Light Water Reactor Calculations
  • ASTM D4888-06(2015) Standard Test Method for Water Vapor in Natural Gas Using Length-of-Stain Detector Tubes
  • ASTM D2791-93(2001) Standard Test Methods for Continuous Determination of Sodium in Water
  • ASTM D2791-19 Standard Test Method for On-Line Determination of Sodium in Water
  • ASTM E2271/E2271M-22 Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Multifamily Dwellings
  • ASTM D5059-14(2019) Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy
  • ASTM E1753-13 Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films
  • ASTM D5413-93(2002) Standard Test Methods for Measurement of Water Levels in Open-Water Bodies
  • ASTM D5413-21 Standard Test Methods for Measurement of Water Levels in Open-Water Bodies
  • ASTM D5413-93(2007) Standard Test Methods for Measurement of Water Levels in Open-Water Bodies
  • ASTM D5413-93(2013) Standard Test Methods for Measurement of Water Levels in Open-Water Bodies
  • ASTM D4744-89(1995)e1 Standard Test Method for Organic Halides in Water by Carbon Adsorption-Microcoulometric Detection
  • ASTM D3868-95(1999) Standard Test Method for Fluoride Ions in Brackish Water, Seawater, and Brines
  • ASTM D4458-09 Standard Test Method for Chloride Ions in Brackish Water, Seawater, and Brines
  • ASTM D3352-08 Standard Test Method for Strontium Ion in Brackish Water, Seawater, and Brines
  • ASTM D5811-00 Standard Test Method for Strontium-90 in Water
  • ASTM D5811-08 Standard Test Method for Strontium-90 in Water
  • ASTM D859-00 Standard Test Method for Silica in Water
  • ASTM D859-05 Standard Test Method for Silica in Water
  • ASTM D512-89(1999) Standard Test Methods for Chloride Ion In Water
  • ASTM C1603-23 Standard Test Method for Measurement of Solids in Water
  • ASTM C1603-16 Standard Test Method for Measurement of Solids in Water
  • ASTM D511-03 Standard Test Methods for Calcium and Magnesium In Water
  • ASTM E2271-04 Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Single-Family Dwellings and Child-Occupied Facilities
  • ASTM C183-02 Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement
  • ASTM C183-13 Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement
  • ASTM C183-08 Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement
  • ASTM E2271-05 Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Single-Family Dwellings and Child-Occupied Facilities
  • ASTM E2271-05a Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Single-Family Dwellings and Child-Occupied Facilities
  • ASTM E2271-05a(2012)e1 Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Dwellings, and in Other Child-Occupied Facilities
  • ASTM D3237-06e1 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
  • ASTM D4129-05(2020) Standard Test Method for Total and Organic Carbon in Water by High Temperature Oxidation and by Coulometric Detection
  • ASTM D5176-20 Standard Test Method for Total Chemically Bound Nitrogen in Water by Pyrolysis and Chemiluminescence Detection
  • ASTM D6734-01 Standard Test Method for Low Levels of Coliphages in Water
  • ASTM D3237-06 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
  • ASTM D3237-02 Standard Test Method for Lead In Gasoline By Atomic Absorption Spectroscopy
  • ASTM D5059-20 Standard Test Methods for Lead and Manganese in Gasoline by X-Ray Spectroscopy
  • ASTM D3237-12 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
  • ASTM D4888-88(1999) Standard Test Method for Water Vapor in Natural Gas Using Length-of-Stain Detector Tubes
  • ASTM D5475-93(1997) Standard Test Method for Nitrogen- and Phosphorus-Containing Pesticides in Water by Gas Chromatography with a Nitrogen-Phosphorus Detector
  • ASTM F1039-87(1993)e1 Standard Test Method for Measurement of Low Level X-Radiation Used in X-Ray Security Screening Systems (Withdrawn 2002)
  • ASTM C562-91(2010)e1 Standard Test Method for Moisture in a Graphite Sample
  • ASTM D516-02 Standard Test Method for Sulfate Ion in Water
  • ASTM D516-90(1995)e1 Standard Test Method for Sulfate Ion in Water
  • ASTM C1603-10 Standard Test Method for Measurement of Solids in Water
  • ASTM D1246-16 Standard Test Method for Bromide Ion in Water
  • ASTM D2791-13 Standard Test Method for On-line Determination of Sodium in Water
  • ASTM D1179-04 Standard Test Methods for Fluoride Ion in Water
  • ASTM D7829-13 Standard Guide for Sediment and Water Determination in Crude Oil
  • ASTM D4658-08 Standard Test Method for Sulfide Ion in Water
  • ASTM D4657-92(1998) Standard Test Method for Polynuclear Aromatic Hydrocarbons in Water
  • ASTM D3534-85(1995)e1 Standard Test Method for Polychlorinated Biphenyls (PCBs) in Water
  • ASTM D3651-11 Standard Test Method for Barium in Brackish Water, Seawater, and Brines
  • ASTM D5173-15(2023) Standard Guide for On-Line Monitoring of Total Organic Carbon in Water by Oxidation and Detection of Resulting Carbon Dioxide
  • ASTM D4176-21 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
  • ASTM D4176-93(1997) Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
  • ASTM D4176-02 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
  • ASTM D4176-22 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
  • ASTM D4130-82(1998) Standard Test Method for Sulfate Ion in Brackish Water, Seawater, and Brines
  • ASTM D5059-98 Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy
  • ASTM D2420-91(2001) Standard Test Method for Hydrogen Sulfide In Liquefied Petroleum (LP) Gases (Lead Acetate Method)
  • ASTM E1834-96 Standard Test Method for Determination of Lead in Nickel Alloys by Electrothermal Atomic Absorption Spectrometric Method
  • ASTM D5059-98(2003)e1 Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy
  • ASTM D2420-91(1996)e1 Standard Test Method for Hydrogen Sulfide In Liquefied Petroleum (LP) Gases (Lead Acetate Method)
  • ASTM D2420-12a Standard Test Method for Hydrogen Sulfide in Liquefied Petroleum (LP) Gases (Lead Acetate Method)
  • ASTM D2420-07 Standard Test Method for Hydrogen Sulfide in Liquefied Petroleum (LP) Gases (Lead Acetate Method)
  • ASTM D2420-13(2018) Standard Test Method for Hydrogen Sulfide in Liquefied Petroleum (LP) Gases (Lead Acetate Method)
  • ASTM D5059-13 Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy
  • ASTM D5059-07 Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy
  • ASTM E1834-96(2002) Standard Test Method for Determination of Lead in Nickel Alloys by Electrothermal Atomic Absorption Spectrometric Method
  • ASTM D5059-21 Standard Test Methods for Lead and Manganese in Gasoline by X-Ray Fluorescence Spectroscopy
  • ASTM E362-99 Standard Test Methods for the Determination of Arsenic and Lead in Silicomanganese and Ferrosilicon Manganese (Withdrawn 2005)
  • ASTM D6452-99(2012)e1 Standard Guide for Purging Methods for Wells Used for Groundwater Quality Investigations
  • ASTM D5173-15 Standard Guide for On-Line Monitoring of Total Organic Carbon in Water by Oxidation and Detection of Resulting Carbon Dioxide
  • ASTM D3977-97(2019) Standard Test Methods for Determining Sediment Concentration in Water Samples
  • ASTM C1603-05a Standard Test Method for Measurement of Solids in Water
  • ASTM C1603-04e1 Standard Test Method for Measurement of Solids in Water
  • ASTM C1603-04 Standard Test Method for Measurement of Solids in Water
  • ASTM D4922-94e1 Standard Test Method for Determination of Radioactive Iron in Water
  • ASTM D4922-09 Standard Test Method for Determination of Radioactive Iron in Water
  • ASTM D4922-01 Standard Test Method for Determination of Radioactive Iron in Water
  • ASTM D4922-21 Standard Test Method for Determination of Radioactive Iron in Water
  • ASTM D1783-01(2020) Standard Test Methods for Phenolic Compounds in Water
  • ASTM D4922-09(2016)e1 Standard Test Method for Determination of Radioactive Iron in Water
  • ASTM E2862-23 Standard Practice for Probability of Detection Analysis for Hit/Miss Data
  • ASTM D3352-03 Standard Test Method for Strontium Ion in Brackish Water, Seawater, and Brines
  • ASTM D3352-03e1 Standard Test Method for Strontium Ion in Brackish Water, Seawater, and Brines
  • ASTM D4130-03 Standard Test Method for Sulfate Ion in Brackish Water, Seawater, and Brines
  • ASTM D3237-17 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
  • ASTM D5462-93(2001) Standard Test Method for On-Line Measurement of Low-Level Dissolved Oxygen in Water
  • ASTM D5521/D5521M-18 Standard Guide for Development of Groundwater Monitoring Wells in Granular Aquifers
  • ASTM D5462-02 Standard Test Method for On-Line Measurement of Low-Level Dissolved Oxygen in Water
  • ASTM D5462-08 Standard Test Method for On-Line Measurement of Low-Level Dissolved Oxygen in Water
  • ASTM D5462-13 Standard Test Method for On-Line Measurement of Low-Level Dissolved Oxygen in Water
  • ASTM D5176-91(2003) Standard Test Method for Total Chemically Bound Nitrogen in Water by Pyrolysis and Chemiluminescence Detection
  • ASTM D5176-91(1995) Standard Test Method for Total Chemically Bound Nitrogen in Water by Pyrolysis and Chemiluminescence Detection
  • ASTM D5176-08 Standard Test Method for Total Chemically Bound Nitrogen in Water by Pyrolysis and Chemiluminescence Detection
  • ASTM D4048-02(2008) Standard Test Method for Detection of Copper Corrosion from Lubricating Grease
  • ASTM D3923-94(2003)e1 Standard Practices for Detecting Leaks in Reverse Osmosis Devices
  • ASTM E1647-98a Standard Practice for Determining Contrast Sensitivity in Radioscopy
  • ASTM D4048-19 Standard Test Method for Detection of Copper Corrosion from Lubricating Grease
  • ASTM D4048-19a Standard Test Method for Detection of Copper Corrosion from Lubricating Grease
  • ASTM D4048-16 Standard Test Method for Detection of Copper Corrosion from Lubricating Grease
  • ASTM E2862-12 Standard Practice for Probability of Detection Analysis for Hit/Miss Data
  • ASTM C1466-00(2007) Standard Test Method for Graphite Furnace Atomic Absorption Spectrometric Determination of Lead and Cadmium Extracted from Ceramic Foodware
  • ASTM C1466-00(2020) Standard Test Method for Graphite Furnace Atomic Absorption Spectrometric Determination of Lead and Cadmium Extracted From Ceramic Foodware
  • ASTM C1466-00(2016) Standard Test Method for Graphite Furnace Atomic Absorption Spectrometric Determination of Lead and Cadmium Extracted from Ceramic Foodware
  • ASTM D4834-03(2008) Standard Test Method for Detection of Lead in Paint by Direct Aspiration Atomic Absorption Spectroscopy
  • ASTM D4834-03(2014) Standard Test Method for Detection of Lead in Paint by Direct Aspiration Atomic Absorption Spectroscopy
  • ASTM C1843-16 Standard Test Method for Determining Moisture Content in Uranium-Ore Concentrate
  • ASTM D5463-18 Standard Guide for Use of Test Kits to Measure Inorganic Constituents in Water
  • ASTM D2907-97 Standard Test Methods for Microquantities of Uranium in Water by Fluorometry
  • ASTM D6994-04 Standard Test Method for Determination of Metal Cyanide Complexes in Wastewater, Surface Water, Groundwater and Drinking Water Using Anion Exchange Chromatography with UV Detection
  • ASTM D5982-15 Standard Test Method for Determining Cement Content of Fresh Soil-Cement (Heat of Neutralization Method)
  • ASTM D4944-98 Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester Method
  • ASTM D6503-99 Standard Test Method for Enterococci in Water Using EnterolertTM
  • ASTM C1603-05 Standard Test Method for Measurement of Solids in Water
  • ASTM D6503-99(2005) Standard Test Method for Enterococci in Water Using Enterolert
  • ASTM D512-04 Standard Test Methods for Chloride Ion In Water
  • ASTM D512-10 Standard Test Methods for Chloride Ion In Water
  • ASTM D8196-20 Standard Practice for Determination of Water Activity (aw) in Cannabis Flower
  • ASTM G9-07 Standard Test Method for Water Penetration into Pipeline Coatings
  • ASTM D4006-11(2012) Standard Test Method for Water in Crude Oil by Distillation
  • ASTM G9-07(2020) Standard Test Method for Water Penetration into Pipeline Coatings
  • ASTM D8196-18 Standard Practice for Determination of Water Activity (aw) in Cannabis Flower
  • ASTM D4006-22 Standard Test Method for Water in Crude Oil by Distillation
  • ASTM D1179-16 Standard Test Methods for Fluoride Ion in Water
  • ASTM D4006-11(2012)e1 Standard Test Method for Water in Crude Oil by Distillation
  • ASTM D512-12 Standard Test Methods for Chloride Ion In Water
  • ASTM D7829-23 Standard Guide for Sediment and Water Determination in Crude Oil
  • ASTM D4201-96 Standard Test Method for Coliphages in Water
  • ASTM D5176-08(2015) Standard Test Method for Total Chemically Bound Nitrogen in Water by Pyrolysis and Chemiluminescence Detection
  • ASTM D3923-08 Standard Practices for Detecting Leaks in Reverse Osmosis and Nanofiltration Devices
  • ASTM D3335-85a(2014) Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy
  • ASTM D6994-15 Standard Test Method for Determination of Metal Cyanide Complexes in Wastewater, Surface Water, Groundwater and Drinking Water Using Anion Exchange Chromatography with UV Detection
  • ASTM D5982-07 Standard Test Method for Determining Cement Content of Fresh Soil-Cement (Heat of Neutralization Method)
  • ASTM E895-89(2008) Standard Practice for Determination of Hydrolysis Rate Constants of Organic Chemicals in Aqueous Solutions
  • ASTM D3335-85a(1999) Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy
  • ASTM D3335-85a(2020) Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy
  • ASTM D4788-88(2001) Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography
  • ASTM D4788-03(2013) Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography
  • ASTM D7598-09 Standard Test Method for Determination of Thiodiglycol in Water by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry
  • ASTM D7598-09e1 Standard Test Method for Determination of Thiodiglycol in Water by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry
  • ASTM D2791-07 Standard Test Method for On-line Determination of Sodium in Water
  • ASTM F1779-97(2003) Standard Practice for Reporting Visual Observations of Oil on Water
  • ASTM F1779-97 Standard Practice for Reporting Visual Observations of Oil on Water
  • ASTM F1779-08 Standard Practice for Reporting Visual Observations of Oil on Water
  • ASTM D3973-85(1995)e1 Standard Test Method for Low-Molecular Weight Halogenated Hydrocarbons in Water
  • ASTM D5173-97(2001) Standard Test Method for On-Line Monitoring of Carbon Compounds in Water by Chemical Oxidation, by UV Light Oxidation, by Both or by High Temperature Combustion Followed by Gas Phase NDIR or by Electr
  • ASTM F1779-08(2014) Standard Practice for Reporting Visual Observations of Oil on Water
  • ASTM D8010-18 Standard Test Method for Determination of Water Soluble Alkali Content in Coal
  • ASTM D3973-85(2017) Standard Test Method for Low-Molecular Weight Halogenated Hydrocarbons in Water
  • ASTM D3977-97(2013)e1 Standard Test Methods for Determining Sediment Concentration in Water Samples
  • ASTM D6503-14 Standard Test Method for Enterococci in Water Using Enterolert
  • ASTM D8010-16 Standard Practice for Determination of Water Soluble Alkali Content in Coal
  • ASTM D1552-23 Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and Infrared (IR) Detection or Thermal Conductivity Detection (TCD)
  • ASTM D3335-85a(2005) Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy
  • ASTM D2010/D2010M-98 Standard Test Methods for Evaluation of Total Sulfation Activity in the Atmosphere by the Lead Dioxide Technique
  • ASTM D3335-85a(2009) Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy
  • ASTM D2010/D2010M-98(2017) Standard Test Methods for Evaluation of Total Sulfation Activity in the Atmosphere by the Lead Dioxide Technique
  • ASTM D5462-01 Standard Test Method for On-Line Measurement of Low-Level Dissolved Oxygen in Water
  • ASTM D5462-21 Standard Test Method for On-Line Measurement of Low-Level Dissolved Oxygen in Water
  • ASTM D2908-74(1980)e1 Standard Practice for Measuring Volatile Organic Matter in Water by Aqueous-Injection Gas Chromatography
  • ASTM D4025-08a Standard Practice for Reporting Results of Examination and Analysis of Deposits Formed from Water for Subsurface Injection
  • ASTM D5092-90(1995)e1 Standard Practice for Design and Installation of Ground Water Monitoring Wells in Aquifers
  • ASTM D7877-22 Standard Guide for Electronic Methods for Detecting and Locating Leaks in Waterproof Membranes
  • ASTM C1005-10 Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements
  • ASTM E840-95 Standard Practice for Using Flame Photometric Detectors in Gas Chromatography
  • ASTM E840-95(2000) Standard Practice for Using Flame Photometric Detectors in Gas Chromatography
  • ASTM E579-04(2023) Standard Test Method for Limit of Detection of Fluorescence of Quinine Sulfate in Solution
  • ASTM E840-95(2021)e1 Standard Practice for Using Flame Photometric Detectors in Gas Chromatography
  • ASTM E1647-09 Standard Practice for Determining Contrast Sensitivity in Radioscopy
  • ASTM E499/E499M-11 Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode
  • ASTM D6980-17 Standard Test Method for Determination of Moisture in Plastics by Loss in Weight
  • ASTM D6016-17 Standard Test Method for Determination of Nitrogen, Water Extractable in Leather
  • ASTM D3371-95 Standard Test Method for Nitriles in Aqueous Solution by Gas-Liquid Chromatography
  • ASTM D6016-06(2012) Standard Test Method for Determination of Nitrogen, Water Extractable in Leather
  • ASTM E1754-08 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
  • ASTM D5317-20 Standard Test Method for Determination of Chlorinated Organic Acid Compounds in Water by Gas Chromatography with an Electron Capture Detector
  • ASTM D5317-98(2017) Standard Test Method for Determination of Chlorinated Organic Acid Compounds in Water by Gas Chromatography with an Electron Capture Detector
  • ASTM D6174-97 Standard Test Method for Inorganic Sulfate in Surfactants by Potentiometric Lead Titration
  • ASTM D6174-01 Standard Test Method for Inorganic Sulfate in Surfactants by Potentiometric Lead Titration
  • ASTM E1834-09 Standard Test Method for Determination of Lead in Nickel Alloys by Graphite Furnace Atomic Absorption Spectrometry
  • ASTM D6174-01(2006) Standard Test Method for Inorganic Sulfate in Surfactants by Potentiometric Lead Titration
  • ASTM D4412-19 Standard Test Methods for Sulfate-Reducing Bacteria in Water and Water-Formed Deposits
  • ASTM D4412-84(1997) Standard Test Methods for Sulfate-Reducing Bacteria in Water and Water-Formed Deposits
  • ASTM D6317-98(2009) Standard Test Method for Low Level Determination of Total Carbon, Inorganic Carbon and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
  • ASTM D2495-87(1993)e1 Standard Test Method for Moisture in Cotton by Oven-Drying
  • ASTM D2495-01 Standard Test Method for Moisture in Cotton by Oven-Drying
  • ASTM D3173-87(1996) Standard Test Method for Moisture in the Analysis Sample of Coal and Coke
  • ASTM D7168-05 Standard Test Method for99Tc in Water by Solid Phase Extraction Disk
  • ASTM D3173-73 Standard Test Method for Moisture In The Analysis Sample Of Coal And Coke
  • ASTM D3173/D3173M-17a Standard Test Method for Moisture in the Analysis Sample of Coal and Coke
  • ASTM D7168-11e1 Standard Test Method for 99Tc in Water by Solid Phase Extraction Disk
  • ASTM D2495-07(2012) Standard Test Method for Moisture in Cotton by Oven-Drying
  • ASTM D3173/D3173M-17 Standard Test Method for Moisture in the Analysis Sample of Coal and Coke
  • ASTM D4358-84(1999) Standard Test Method for Lead and Chromium in Air Particulate Filter Samples of Lead Chromate Type Pigment Dusts by Atomic Absorption Spectroscopy
  • ASTM D4358-05 Standard Test Method for Lead and Chromium in Air Particulate Filter Samples of Lead Chromate Type Pigment Dusts by Atomic Absorption Spectroscopy
  • ASTM D4282-95(2001) Standard Test Method for Determination of Free Cyanide in Water and Wastewater by Microdiffusion
  • ASTM D4282-95 Standard Test Method for Determination of Free Cyanide in Water and Wastewater by Microdiffusion
  • ASTM E579-04(2009) Standard Test Method for Limit of Detection of Fluorescence of Quinine Sulfate in Solution
  • ASTM G209-14(2018) Standard Practice for Detecting mu-phase in Wrought Nickel-Rich, Chromium, Molybdenum-Bearing Alloys
  • ASTM E579-04(2015) Standard Test Method for Limit of Detection of Fluorescence of Quinine Sulfate in Solution
  • ASTM G209-14(2022) Standard Practice for Detecting mu-phase in Wrought Nickel-Rich, Chromium, Molybdenum-Bearing Alloys
  • ASTM E579-04 Standard Test Method for Limit of Detection of Fluorescence of Quinine Sulfate in Solution
  • ASTM D5475-93(2002) Standard Test Method for Nitrogen- and Phosphorus-Containing Pesticides in Water by Gas Chromatography with a Nitrogen-Phosphorus Detector
  • ASTM D4043-96(2004) Standard Guide for Selection of Aquifer Test Method in Determining Hydraulic Properties by Well Techniques
  • ASTM D4043-96e1 Standard Guide for Selection of Aquifer-Test Method in Determining of Hydraulic Properties by Well Techniques
  • ASTM D4043-96(2010)e1 Standard Guide for Selection of Aquifer Test Method in Determining Hydraulic Properties by Well Techniques
  • ASTM D5784-95(2006) Standard Guide for Use of Hollow-Stem Augers for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
  • ASTM D1988-06 Standard Test Method for Mercaptans in Natural Gas Using Length-of-Stain Detector Tubes
  • ASTM D1988-06(2011) Standard Test Method for Mercaptans in Natural Gas Using Length-of-Stain Detector Tubes
  • ASTM D5317-98 Standard Test Method for Determination of Chlorinated Organic Acid Compounds in Water by Gas Chromatography with an Electron Capture Detector
  • ASTM D5317-98(2003)e1 Standard Test Method for Determination of Chlorinated Organic Acid Compounds in Water by Gas Chromatography with an Electron Capture Detector
  • ASTM D8234-19 Standard Test Method for Anions in High Ionic Water by Ion Chromatography using Tandem Suppressed Conductivity and UV Detection
  • ASTM D5317-98(2011) Standard Test Method for Determination of Chlorinated Organic Acid Compounds in Water by Gas Chromatography with an Electron Capture Detector
  • ASTM B577-93(2004) Standard Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper
  • ASTM E697-96(2019) Standard Practice for Use of Electron-Capture Detectors in Gas Chromatography
  • ASTM B577-19 Standard Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper
  • ASTM E1647-03 Standard Practice for Determining Contrast Sensitivity in Radioscopy
  • ASTM D3923-08(2014) Standard Practices for Detecting Leaks in Reverse Osmosis and Nanofiltration Devices
  • ASTM D3972-09 Standard Test Method for Isotopic Uranium in Water by Radiochemistry
  • ASTM D6698-01 Standard Test Method for On-Line Measurement of Turbidity Below 5 NTU in Water
  • ASTM D6016-96 Standard Test Method for Determination of Nitrogen, Water Extractable in Leather
  • ASTM D6016-96(2001) Standard Test Method for Determination of Nitrogen, Water Extractable in Leather
  • ASTM D6016-06 Standard Test Method for Determination of Nitrogen, Water Extractable in Leather
  • ASTM D6317-98 Standard Test Method for Low Level Determination of Total Carbon, Inorganic Carbon and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
  • ASTM D6317-98(2004) Standard Test Method for Low Level Determination of Total Carbon, Inorganic Carbon and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
  • ASTM D5092-02 Standard Practice for Design and Installation of Ground Water Monitoring Wells in Aquifers
  • ASTM D3695-95 Standard Test Method for Volatile Alcohols in Water by Direct Aqueous-Injection Gas Chromatography
  • ASTM C1005-00 Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements
  • ASTM D6785-20 Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry
  • ASTM D5952-02 Standard Guide for Inspecting Water Systems for Legionellae and Investigating Possible Outbreaks of Legionellosis (Legionnaires' Disease or Pontiac Fever)
  • ASTM D4025-08a(2013) Standard Practice for Reporting Results of Examination and Analysis of Deposits Formed from Water for Subsurface Injection
  • ASTM D2580-06 Standard Test Method for Phenols in Water by Gas-Liquid Chromatography
  • ASTM D1864-89(2002) Standard Test Method for Moisture in Mineral Aggregate Used on Built-Up Roofs
  • ASTM D4643-00 Standard Test Method for Determination of Water (Moisture) Content of Soil by the Microwave Oven Method
  • ASTM C1096-91(1999) Standard Test Method for Determination of Wood Fiber in Asbestos Cement
  • ASTM C1096-91(2004) Standard Test Method for Determination of Wood Fiber in Asbestos Cement
  • ASTM D5907-03 Standard Test Method for Filterable and Nonfilterable Matter in Water
  • ASTM D4006-07 Standard Test Method for Water in Crude Oil by Distillation
  • ASTM D4643-08 Standard Test Method for Determination of Water (Moisture) Content of Soil by Microwave Oven Heating
  • ASTM C1096/C1096M-07(2011)e1 Standard Test Method for Determination of Wood Fiber in Asbestos Cement
  • ASTM D5076/D5076M-13 Standard Test Method for Measuring Voids in Roofing and Waterproofing Membranes
  • ASTM D5463-13 Standard Guide for Use of Test Kits to Measure Inorganic Constituents in Water
  • ASTM D7168-05e1 Standard Test Method for99Tc in Water by Solid Phase Extraction Disk
  • ASTM C563-03 Standard Test Method for Optimum SO3 in Hydraulic Cement Using 24-h Compressive Strength
  • ASTM D4844-03(2009) Standard Guide for Air Monitoring at Waste Management Facilities for Worker Protection
  • ASTM G3-13 Standard Practice for Conventions Applicable to Electrochemical Measurements in Corrosion Testing
  • ASTM E545-99 Standard Test Method for Determining Image Quality in Direct Thermal Neutron Radiographic Examination
  • ASTM E545-05 Standard Test Method for Determining Image Quality in Direct Thermal Neutron Radiographic Examination
  • ASTM E545-19 Standard Test Method for Determining Image Quality in Direct Thermal Neutron Radiographic Examination
  • ASTM E545-14 Standard Test Method for Determining Image Quality in Direct Thermal Neutron Radiographic Examination
  • ASTM D4129-05 Standard Test Method for Total and Organic Carbon in Water by High Temperature Oxidation and by Coulometric Detection
  • ASTM D4129-05(2012) Standard Test Method for Total and Organic Carbon in Water by High Temperature Oxidation and by Coulometric Detection
  • ASTM D4129-05(2013) Standard Test Method for Total and Organic Carbon in Water by High Temperature Oxidation and by Coulometric Detection
  • ASTM D1988-06(2015) Standard Test Method for Mercaptans in Natural Gas Using Length-of-Stain Detector Tubes
  • ASTM D4810-06 Standard Test Method for Hydrogen Sulfide in Natural Gas Using Length-of-Stain Detector Tubes
  • ASTM D4810-88(1999) Standard Test Method for Hydrogen Sulfide in Natural Gas Using Length-of-Stain Detector Tubes
  • ASTM D4810-20 Standard Test Method for Hydrogen Sulfide in Natural Gas Using Length-of-Stain Detector Tubes
  • ASTM E2271-03 Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Single-Family Dwellings and Child-Occupied Facilities
  • ASTM D1552-16e1 Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and Infrared (IR) Detection or Thermal Conductivity Detection (TCD)
  • ASTM D4176-04e1 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
  • ASTM D4176-04 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
  • ASTM D4176-04(2009) Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
  • ASTM D4176-04(2014) Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
  • ASTM E1418-21 Standard Practice for Visible Penetrant Testing Using the Water-Washable Process
  • ASTM E1209-18 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Water-Washable Process
  • ASTM D4494-95(2004) Standard Test Method for Detecting Residual Odor of Drycleaning Grade Perchloroethylene
  • ASTM D2982-07(2019) Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils
  • ASTM D4494-95(2010)e1 Standard Test Method for Detecting Residual Odor of Drycleaning Grade Perchloroethylene
  • ASTM F2617-08 Standard Test Method for Identification and Quantification of Chromium, Bromine, Cadmium, Mercury, and Lead in Polymeric Material Using Energy Dispersive X-ray Spectrometry
  • ASTM D4792-00(2006) Standard Test Method for Potential Expansion of Aggregates from Hydration Reactions
  • ASTM D4012-81(2002) Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Water
  • ASTM D4012-81(1997) Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Water
  • ASTM D4792/D4792M-13(2019) Standard Test Method for Potential Expansion of Aggregates from Hydration Reactions
  • ASTM D6698-14 Standard Test Method for On-Line Measurement of Turbidity Below 5 NTU in Water
  • ASTM D6403-99(2014) Standard Test Method for Determining Moisture in Raw and Spent Materials
  • ASTM D5243-92(2013) Standard Test Method for Open-Channel Flow Measurement of Water Indirectly at Culverts
  • ASTM D7726-11(2023) Standard Guide for The Use of Various Turbidimeter Technologies for Measurement of Turbidity in Water
  • ASTM D7785-12 Standard Test Method for Water in Lint Cotton by Oven Evaporation Combined with Volumetric Karl Fischer Titration
  • ASTM D4282-02 Standard Test Method for Determination of Free Cyanide in Water and Wastewater by Microdiffusion
  • ASTM D4282-15(2022) Standard Test Method for Determination of Free Cyanide in Water and Wastewater by Microdiffusion
  • ASTM D4282-02(2010) Standard Test Method for Determination of Free Cyanide in Water and Wastewater by Microdiffusion
  • ASTM D2709-22 Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
  • ASTM C1207-10(2018) Standard Test Method for Nondestructive Assay of Plutonium in Scrap and Waste by Passive Neutron Coincidence Counting
  • ASTM D4834-88(1998) Standard Test Method for Detection of Lead in Paint by Direct Aspiration Atomic Absorption Spectroscopy
  • ASTM D8083-16 Standard Test Method for Total Nitrogen, and Total Kjeldahl Nitrogen (TKN) by Calculation, in Water by High Temperature Catalytic Combustion and Chemiluminescence Detection
  • ASTM C1785-15 Standard Test Method for Concentration of Pinhole Detections in Moisture Barriers on Metal Jacketing
  • ASTM D7877-14 Standard Guide for Electronic Methods for Detecting and Locating Leaks in Waterproof Membranes
  • ASTM G3-89(2004) Standard Practice for Conventions Applicable to Electrochemical Measurements in Corrosion Testing
  • ASTM G3-89(2010) Standard Practice for Conventions Applicable to Electrochemical Measurements in Corrosion Testing
  • ASTM D4785-08 Standard Test Method for Low-Level Analysis of Iodine Radioisotopes in Water
  • ASTM D2580-94 Standard Test Method for Phenols in Water by Gas-Liquid Chromatography
  • ASTM C1096-07 Standard Test Method for Determination of Wood Fiber in Asbestos Cement
  • ASTM D6698-07 Standard Test Method for On-Line Measurement of Turbidity Below 5 NTU in Water
  • ASTM D3731-87(1998) Standard Practices for Measurement of Chlorophyll Content of Algae in Surface Waters
  • ASTM D2580-94(2001) Standard Test Method for Phenols in Water by Gas-Liquid Chromatography
  • ASTM D2462-90(2008) Standard Test Method for Moisture in Wool by Distillation With Toluene
  • ASTM D4007-11 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)

Professional Standard - Urban Construction, Standards for the detection of lead in water

  • CJ 26.19-1991 Water quality inspection methods for municipal sewage Determination of standard lead dithizone spectrophotometric method
  • CJ 26.15-1991 Municipal sewage water quality inspection method standard Determination of copper, zinc, lead, cadmium, manganese, nickel, iron atomic absorption spectrometry
  • CJ 26.25-1991 Determination of Standard Ammonia Nitrogen in Municipal Sewage Water Quality Inspection Method
  • CJ 26.20-1991 Determination of Standard Total Chromium in Municipal Sewage Water Quality Inspection Method
  • CJ 26.10-1991 Determination of standard sulfide in urban sewage water quality inspection method
  • CJ 26.9-1991 Determination of Standard Cyanide in Municipal Sewage Water Quality Inspection Method
  • CJ 26.7-1991 Water quality inspection method of urban sewage - Determination gravimetric method of standard oil
  • CJ 26.5-1991 Municipal sewage water quality inspection method Standard gravimetric method for total solids
  • CJ 26.1-1991 Municipal sewage water quality inspection method standard pH value determination potentiometer method
  • CJ 26.11-1991 Municipal sewage water quality inspection method standard sulfate gravimetric method
  • CJ 26.3-1991 Water quality examination methods for urban sewage - Volumetric method for standard easily sinkable solids
  • CJ 26.28-1991 Municipal sewage water quality inspection method standard Determination of total phosphorus spectrophotometric method
  • CJ 26.2-1991 Municipal sewage water quality examination method standard gravimetric method for the determination of suspended solids
  • CJ 26.27-1991 Municipal sewage water quality inspection method standard Determination of total nitrogen Titration method after distillation
  • CJ 26.22-1991 Water quality inspection method of urban sewage standard Determination of cadmium dithizone spectrophotometric method
  • CJ 26.17-1991 Water quality examination methods for urban sewage Standard Determination of zinc dithizone spectrophotometric method
  • CJ 26.13-1991 Municipal sewage water quality test method Determination of standard aniline Azo spectrophotometric method
  • CJ 26.18-1991 Water quality examination methods for municipal sewage Determination of standard mercury cold atomic absorption spectrometry
  • CJ 26.6-1991 Municipal sewage water quality inspection method standard Determination of chemical oxygen demand Potassium dichromate method
  • CJ 26.14-1991 Municipal sewage water quality inspection method standard benzene series (C6-C8) determination by gas chromatography
  • CJ 26.29-1991 Municipal sewage water quality inspection method standard Determination of total organic carbon non-dispersive infrared method
  • CJ 26.26-1991 Municipal sewage water quality inspection method standard Determination of nitrite nitrogen spectrophotometric method

Korean Agency for Technology and Standards (KATS), Standards for the detection of lead in water

  • KS D 1926-2009 Standard test methods for the determination of lead in ferromanganese
  • KS M 3211-2005 Determination of lead in plastics
  • KS D 1925-2009 Standard test methods for the determination of lead in silicomanganese and ferrosilicon manganese
  • KS G 6801-2003 Inspection standard of amusements(Water shoot)
  • KS D 0282-2005(2020) Standard test method for water penetration into pipeline coatings
  • KS M 5985-2008(2018) Standard test method for low concentrations of lead, cadmium and cobalt in paint by atomic absorption spectroscopy
  • KS L 5118-2017 Standard testing method for optimum SO 3 in portland cement
  • KS F 2102-2018 Standard test method for measuring pore water pressures in soils
  • KS B ISO TS 21432:2017 Non-destructive testing — Standard test method for determining residual stresses by neutron diffraction
  • KS B ISO TS 21432-2017(2022) Non-destructive testing — Standard test method for determining residual stresses by neutron diffraction

Underwriters Laboratories (UL), Standards for the detection of lead in water

National Health Commission of the People's Republic of China, Standards for the detection of lead in water

  • GB 5009.12-2017 National Food Safety Standard Determination of Lead in Food
  • GB 5009.12-2010 National food safety standard Determination of lead in foods
  • GB 5009.75-2014 Determination of Lead in Food Additives in National Food Safety Standards
  • GB 5009.3-2010 National food safety standard Determination of moisture in foods
  • GB 5009.3-2016 National Food Safety Standard Determination of Moisture in Food
  • GB 5009.206-2016 National Food Safety Standard Determination of Tetrodotoxin in Aquatic Products
  • GB 5009.274-2016 National Food Safety Standard Determination of Sigatoxin in Aquatic Products

Professional Standard - Agriculture, Standards for the detection of lead in water

Association Francaise de Normalisation, Standards for the detection of lead in water

  • NF T90-386*NF EN 15460:2008 Water quality - Guidance standard for the surveying of macrophytes in lakes.
  • NF X43-355*NF EN 15841:2010 Ambient air quality - Standard method for determination of arsenic, cadmium, lead and nickel in atmospheric deposition.
  • NF EN ISO 21432:2020 Essais non destructifs - Méthode normalisée de détermination des contraintes résiduelles par diffraction de neutrons
  • NF EN 14902:2005 Qualité de l'air ambiant - Méthode normalisée pour la mesure du plomb, cadmium, de l'arsenic et du nickel dans la fraction MP10 de la matière particulaire en suspension
  • NF A09-610*NF EN ISO 21432:2020 Non-destructive testing - Standard test method for determining residual stresses by neutron diffraction

BR-ABNT, Standards for the detection of lead in water

  • ABNT MB-227-1959 Brazilian Standard for Water Absorption Testing in Reinforced Concrete Pipes
  • ABNT MB-228-1959 Brazilian Standard for Water Permeability Testing in Reinforced Concrete Pipes

German Institute for Standardization, Standards for the detection of lead in water

  • DIN 38412-16:1985 German standard methods for the examination of water, waste water and sludge; test methods using water organisms (group L); determination of chlorophyll a in surface water (L 16)
  • DIN 38406-16:1990-03 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of zinc, cadmium, lead, copper, thallium, nickel, cobalt by voltammetry (E 16)
  • DIN 38406-6:1998 German standard methods for the examination of water, waste water and sludge - Cations (group E) - Part 6: Determination of lead by atomic absorption spectrometry (AAS) (E 6)
  • DIN 38414-13:1992-03 German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); detection of salmonellae in disinfected sewage sludge (S 13)
  • DIN EN 15841:2010-04 Ambient air quality - Standard method for determination of arsenic, cadmium, lead and nickel in atmospheric deposition; German version EN 15841:2009
  • DIN 38406-6:1998-07 German standard methods for the examination of water, waste water and sludge - Cations (group E) - Part 6: Determination of lead by atomic absorption spectrometry (AAS) (E 6)
  • DIN 38409-9:1980-07 German standard methods for the examination of water, waste water and sludge; general measures of effects and substances (group H), determination of the settleable matter by volume in water and waste water (H9)
  • DIN 38405-52:2020 German standard methods for the examination of water, waste water and sludge - Anions (group D) - Part 52: Photometric determination of dissolved chromium(VI) in water (D 52)
  • DIN 38407-27:2012 German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 27: Determination of selected phenols in groundwater and leachate, aqueous eluates and percolates (F 27)
  • DIN 38410-1:2004-10 German standard methods for the examination of water, waste water and sludge - Biological-ecological analysis of water (group M) - Part 1: Determination of the saprobic index in running waters (M 1)
  • DIN 38405-52:2020-11 German standard methods for the examination of water, waste water and sludge - Anions (group D) - Part 52: Photometric determination of dissolved chromium(VI) in water (D 52)
  • DIN 38407-42:2011 German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 42: Determination of selected polyfluorinated compounds (PFC) in water - Method using high performance liquid chromatography an
  • DIN 38409-10:1980-07 German standard methods for the examination of water, waste water and sludge; general measures of effects and substances (group H), determination of the settleable matter by mass concentration in water and waste water (H10)
  • DIN 38414-12:1986 German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); determination of phosphorus in sludges and sediments (S 12)
  • DIN 38406-1:1983 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of iron (E 1)
  • DIN 38406-2:1983 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of manganese (E 2)
  • DIN 38414-8:1985 German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); determination of the amenability to anaerobic digestion (S 8)
  • DIN 38404-18:1994 German standard methods for the examination of water, waste water and sludge; physical and physical-chemical parameters (group C); determination of Radium-226-concentration in potable water, ground water, surface water and waste water (C 18)
  • DIN 38406-2:1983-05 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of manganese (E 2)
  • DIN 38406-1:1983-05 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of iron (E 1)
  • DIN 38405-13:1981 German Standard Methods for the Analysis of Water, Waste Water and Sludge; Anions (Group D); Determination of Cyanides (D 13)
  • DIN 38406-17:2009 German standard methods for the examination of water, waste water and sludge - Cations (group E) - Part 17: Determination of uranium - Method using adsorptive stripping voltammetry in surface water, raw water and drinking water (E 17)

PT-IPQ, Standards for the detection of lead in water

  • NP 706-1984 plastic material. Standard sampling in inspection testing

UY-UNIT, Standards for the detection of lead in water

  • NORMA 58-P-1947 Interim Standard for Measurement and Dehydration of Water in Asphalt Raw Materials

British Standards Institution (BSI), Standards for the detection of lead in water

  • BS EN 14184:2003 Water quality - Guidance standard for the surveying of aquatic macrophytes in running waters
  • BS EN 15708:2010 Water quality. Guidance standard for the surveying, sampling and laboratory analysis of phytobenthos in shallow running water
  • BS EN 15708:2009 Water quality - Guidance standard for the surveying, sampling and laboratory analysis of phytobenthos in shallow running water

European Committee for Standardization (CEN), Standards for the detection of lead in water

  • EN 14184:2003 Water quality Guidance standard for the surveying of aquatic macrophytes in running waters
  • EN 14184:2014 Water quality - Guidance for the surveying of aquatic macrophytes in running waters
  • EN ISO/TS 21432:2005 Non-destructive testing - Standards test method for determining residual stresses by neutron diffraction

PH-BPS, Standards for the detection of lead in water

TR-TSE, Standards for the detection of lead in water

  • TS 124-1964 STANDARD METHODS OF TEST FOR VVATER ?N BITUM?NOUS MATERIALS

RU-GOST R, Standards for the detection of lead in water

  • GOST 8.395-1980 State system for ensuring the uniformity of measurements. Reference conditions of measurements while calibrating. General requirements
  • GOST 26454-1985 Adhesives. Method for determination of elasticity modulus of adhesive in adhesive bond

API - American Petroleum Institute, Standards for the detection of lead in water

  • API TR 2573-2013 Standard Guide for Sediment and Water Determination in Crude Oil Standard Guide for Sediment and Water Determination in Crude Oil (FIRST EDITION)
  • API STD 2542-1968 STANDARD METHODS OF TEST FOR WATER AND SEDIMENT IN CRUDE OILS

Danish Standards Foundation, Standards for the detection of lead in water

  • DS/EN 15841:2010 Ambient air quality - Standard method for determination of arsenic, cadmium, lead and nickel in atmospheric deposition

Lithuanian Standards Office , Standards for the detection of lead in water

  • LST EN 15841-2010 Ambient air quality - Standard method for determination of arsenic, cadmium, lead and nickel in atmospheric deposition

AENOR, Standards for the detection of lead in water

  • UNE-EN 15841:2010 Ambient air quality - Standard method for determination of arsenic, cadmium, lead and nickel in atmospheric deposition

National Fire Protection Association (NFPA), Standards for the detection of lead in water

  • NFPA 25 AMD 4-2012 Standard for the Inspection, Testing, and Maintenance of Water-Based Fire Protection Systems

AASHTO - American Association of State Highway and Transportation Officials, Standards for the detection of lead in water

  • TP 78-2009 Standard Specification for Detecting the Presence of Phosphorous in Asphalt Binder
  • T144-1992 Standard Method of Test for Cement Content of Soil-Cement Mixture (ASTM D806-89)
  • T 211-1990 Standard Method of Test for Determination of Cement Content in Cement-Treated Aggregate by the Method of Titration
  • T 291-1994 Standard Method of Test for Determining Water-Soluble Chloride Ion Content in Soil
  • T291-1994 Standard Method of Test for Determining Water Soluble Chloride Ion Content in Soil

Professional Standard - Hygiene , Standards for the detection of lead in water

  • WS/T 799-2022 Method for enrichment and nucleic acid detection of SARS-CoV-2 in sewage

Group Standards of the People's Republic of China, Standards for the detection of lead in water

  • T/CECS 1032-2022 Technical standard for the detection of releasable ammonia in fly ash for cement, mortar and concrete

TH-TISI, Standards for the detection of lead in water

  • TIS 1182-1994 Standard test methods for peroleum products. Part 1: Determination of lead content in gasoline. Iodine monochloride method
  • TIS 1182.10-1996 Standard test methods for petroleum and petroleum products.part 10: trace determination of lead in gasoline

Guangxi Provincial Food Standard of the People's Republic of China, Standards for the detection of lead in water

  • DBS45/ 023-2015 PCR method for qualitative detection of buffalo milk and its products mixed with bovine milk in local food safety standards

YU-JUS, Standards for the detection of lead in water

  • JUS F.S3.011-1989 Standard method of test far wool content of raw wool. Laboratorv scale

Institute of Electrical and Electronics Engineers (IEEE), Standards for the detection of lead in water

  • NFPA (Fire) 25 Standard for the Inspection, Testing, and Maintenance of Water-Based Fire Protection Systems, 2020 Edition

ES-UNE, Standards for the detection of lead in water

  • UNE-EN ISO 21432:2022 Non-destructive testing - Standard test method for determining residual stresses by neutron diffraction (ISO 21432:2019)

Indonesia Standards, Standards for the detection of lead in water

  • SNI 8069-2014 Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy
  • SNI 03-6826-2002 Test method for normal consitency of portland cement by vicat apparatus for civil working

National Association of Corrosion Engineers (NACE), Standards for the detection of lead in water

IT-UNI, Standards for the detection of lead in water

  • UNI EN ISO 21432:2021 Non-destructive testing - Standard test method for determining residual stresses by neutron diffraction

Japanese Industrial Standards Committee (JISC), Standards for the detection of lead in water

  • JIS K 0350-10-10:2002 Testing methods for standard plate counts of heterotrophic bacteria in industrial water and wastewater

American Society of Mechanical Engineers (ASME), Standards for the detection of lead in water

Acoustical Society of America (ASA), Standards for the detection of lead in water

  • ASA S3.52-2016 American National Standard Measurements of the Threshold of Hearing and Signal Detectability in a Sound Field

未注明发布机构, Standards for the detection of lead in water

  • BS ISO 21432:2019 Non - destructive testing — Standard test method for determining residual stresses by neutron diffraction

KR-KS, Standards for the detection of lead in water

  • KS B ISO 21432-2023 Non-destructive testing — Standard test method for determining residual stresses by neutron diffraction

VE-FONDONORMA, Standards for the detection of lead in water

  • COVENIN 882-1976 Tests on water reaction in Venezuela aviation dye standards
  • COVENIN 702-1974 Detection of refractive values in Venezuelan vegetable fat and vegetable oil standards

The American Road & Transportation Builders Association, Standards for the detection of lead in water

  • AASHTO T 211-1990 Standard Method of Test for Determination of Cement Content in Cement-Treated Aggregate by the Method of Titration

American National Standards Institute (ANSI), Standards for the detection of lead in water

  • ANSI/NFPA 1911-2011 Standard for the Inspection, Maintenance, Testing, and Retirement of In-Service Automotive Fire Apparatus

KE-KEBS, Standards for the detection of lead in water

  • KS 05-459 Pt.2-1985 KENYA STANDARD SPECIFICATION FOR DRINKING WATER PART 2. PHYSICAL METHODS OF TEST FOR THE QUALITY OF DRINKING WATER




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved