ZH
RU
ES
Total Solids Standard
Total Solids Standard, Total:500 items.
In the international standard classification, Total Solids Standard involves: Milk and milk products, Farm buildings, structures and installations, Fuels, Water quality, Leather technology, Beverages, Standardization. General rules, On-board equipment and instruments, Construction materials, Wastes, Analytical chemistry, Coals, Products of the chemical industry, Raw materials for rubber and plastics, Environmental protection, Food products in general, Road vehicle systems, Aerospace fluid systems and components, Shipbuilding and marine structures in general, Products of the textile industry, Occupational safety. Industrial hygiene, Organic chemicals, Protection of and in buildings, Software development and system documentation, Graphical symbols, Sports equipment and facilities, Reinforced plastics, Rubber and plastics products, Cargo equipment, Structures of buildings, Buildings, Microbiology, Fasteners, Air quality, Refrigerating technology, Paints and varnishes, Iron and steel products, Medical equipment, Particle size analysis. Sieving, Civil engineering in general, Lubricants, industrial oils and related products, Plastics, General methods of tests and analysis for food products, Protection against dangerous goods, Materials for the reinforcement of composites, Radiation protection, Surface treatment and coating, Components for electrical equipment, Electronic components in general, Integrated circuits. Microelectronics, Internal combustion engines, Vocabularies, Paint ingredients, External sewage systems, Graphic technology, Edible oils and fats. Oilseeds, Rubber, Equipment for the metallurgical industry, Petroleum products in general, Farming and forestry, HEALTH CARE TECHNOLOGY, Packaging and distribution of goods in general, Cases. Boxes. Crates, Paper products, Open systems interconnection (OSI), Microprocessor systems, Radiocommunications, Galvanic cells and batteries, Insulating materials.
British Standards Institution (BSI), Total Solids Standard
- BS ISO 6734:2010 Sweetened condensed milk. Determination of total solids content (Reference method)
- BS ISO 3728:2004 Ice-cream and milk ice - Determination of total solids content (reference method)
- BS EN ISO 5534:2004 Cheese and processed cheese - Determination of the total solids content (Reference method)
- BS ISO 6731:2010 Milk, cream and evaporated milk. Determination of total solids content (Reference method)
- 13/30277792 DC BS EN 15603. Energy performance of buildings. Overarching standard EPBD
- BS ISO 14411-2:2020 Preparation of particulate reference materials - Polydisperse spherical particles
- BS 7254-3:1990 Orthopaedic implants - Recommendations for care and handling
American Society for Testing and Materials (ASTM), Total Solids Standard
- ASTM E1756-95 Standard Test Method for Determination of Total Solids in Biomass
- ASTM E1756-01 Standard Test Method for Determination of Total Solids in Biomass
- ASTM D5907-18 Standard Test Methods for Filterable Matter (Total Dissolved Solids) and Nonfilterable Matter (Total Suspended Solids) in Water
- ASTM D5907-10 Standard Test Methods for Filterable Matter (Total Dissolved Solids) and Nonfilterable Matter (Total Suspended Solids) in Water
- ASTM D5907-13 Standard Test Methods for Filterable Matter lpar;Total Dissolved Solidsrpar; and Nonfilterable Matter lpar;Total Suspended Solidsrpar; in Water
- ASTM E1756-08(2020) Standard Test Method for Determination of Total Solids in Biomass
- ASTM E1756-08(2015) Standard Test Method for Determination of Total Solids in Biomass
- ASTM E1756-08 Standard Test Method for Determination of Total Solids in Biomass
- ASTM D4903-99(2009) Standard Test Method for Total Solids and Water in Vegetable Tanning Material Extracts
- ASTM D4903-99(2020) Standard Test Method for Total Solids and Water in Vegetable Tanning Material Extracts
- ASTM D4903-99(2016) Standard Test Method for Total Solids and Water in Vegetable Tanning Material Extracts
- ASTM D4903-99(2004) Standard Test Method for Total Solids and Water in Vegetable Tanning Material Extracts
- ASTM D4903-99 Standard Test Method for Total Solids and Water in Vegetable Tanning Material Extracts
- ASTM C309-07 Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete
- ASTM D4687-95 Standard Guide for General Planning of Waste Sampling
- ASTM D4687-14(2022) Standard Guide for General Planning of Waste Sampling
- ASTM D4095-97(2008) Standard Practice for Use of the Refractometer for Determining Nonvolatile Matter (Total Solids) in Floor Polishes
- ASTM D4095-97(2014) Standard Practice for Use of the Refractometer for Determining Nonvolatile Matter &40;Total Solids&41; in Floor Polishes
- ASTM D5368-93 Standard Test Methods for Gravimetric Determination of Total Solvent Extractable Content (TSEC) of Solid Waste Samples
- ASTM D4653-87(1998) Standard Test Method for Total Chlorides in Leather
- ASTM D4653-87(2020) Standard Test Method for Total Chlorides in Leather
- ASTM D4653-87(2015) Standard Test Method for Total Chlorides in Leather
- ASTM D6316-00 Standard Test Method for Determination of Total, Combustible and Carbonate Carbon in Solid Residues from Coal and Coke
- ASTM D6316-09b Standard Test Method for Determination of Total, Combustible and Carbonate Carbon in Solid Residues from Coal and Coke
- ASTM D7957/D7957M-22 Standard Specification for Solid Round Glass Fiber Reinforced Polymer Bars for Concrete Reinforcement
- ASTM F1755M-96 Standard Specification for Solid State Bargraph Meters for Shipboard Use (Metric)
- ASTM F1755M-96(2002) Standard Specification for Solid State Bargraph Meters for Shipboard Use (Metric)
- ASTM F1755M-96(2007) Standard Specification for Solid State Bargraph Meters for Shipboard Use [Metric]
- ASTM D5948-05e1 Standard Specification for Molding Compounds, Thermosetting
- ASTM D5948-05 Standard Specification for Molding Compounds, Thermosetting
- ASTM D5948-05(2012) Standard Specification for Molding Compounds, Thermosetting
- ASTM D3987-12(2020) Standard Practice for Shake Extraction of Solid Waste with Water
- ASTM D5948-05(2020) Standard Specification for Molding Compounds, Thermosetting
- ASTM D6316-04 Standard Test Method for Determination of Total, Combustible and Carbonate Carbon in Solid Residues from Coal and Coke
- ASTM D6316-09 Standard Test Method for Determination of Total, Combustible and Carbonate Carbon in Solid Residues from Coal and Coke
- ASTM D6316-09a Standard Test Method for Determination of Total, Combustible and Carbonate Carbon in Solid Residues from Coal and Coke
- ASTM D6316-09be1 Standard Test Method for Determination of Total, Combustible and Carbonate Carbon in Solid Residues from Coal and Coke
- ASTM D6316-17 Standard Test Method for Determination of Total, Combustible and Carbonate Carbon in Solid Residues from Coal and Coke
- ASTM D6797-02 Standard Test Method for Bursting Strength of Fabrics Constant-Rate-of-Extension (CRE) Ball Burst Test
- ASTM D5353-95(2019) Standard Test Method for Determination of Total Desulfated Fatty Matter
- ASTM E1784-97(2002) Standard Test Method for Total Peroxides in Acrylonitrile
- ASTM D1303-55(1979)e1 Standard Test Method for Total Chlorine In Vinyl Chloride Polymers And Copolymers
- ASTM D5445-21 Standard Practice for Pictorial Markings for Handling of Goods
- ASTM F1352-02 Standard Guide for Fixed Blade Broadhead Performance and Safety Standards
- ASTM F1352-08 Standard Guide for Fixed Blade Broadhead Performance and Safety Standards
- ASTM D6797-07 Standard Test Method for Bursting Strength of Fabrics Constant-Rate-of-Extension (CRE) Ball Burst Test
- ASTM D3529M-10 Standard Test Method for Matrix Solids Content and Matrix Content of Composite Prepreg
- ASTM D6797-07(2011) Standard Test Method for Bursting Strength of Fabrics Constant-Rate-of-Extension (CRE) Ball Burst Test
- ASTM D1201-99(2004) Standard Specification for Thermosetting Polyester Molding Compounds
- ASTM D1201-99 Standard Specification for Thermosetting Polyester Molding Compounds
- ASTM C1603-10 Standard Test Method for Measurement of Solids in Water
- ASTM D1201-99(2012) Standard Specification for Thermosetting Polyester Molding Compounds
- ASTM D1201-13 Standard Specification for Thermosetting Polyester Molding Compounds
- ASTM E234-98 Standard Test Method for Total Bromine Number of Unsaturated Aliphatic Chemicals
- ASTM E2432-11 Standard Guide for General Principles of Sustainability Relative to Buildings
- ASTM D4899-99(2020) Standard Practice for Analysis of Vegetable Tanning Materials—General
- ASTM E234-98(2003)e1 Standard Test Method for Total Bromine Number of Unsaturated Aliphatic Chemicals
- ASTM D4899-99(2016) Standard Practice for Analysis of Vegetable Tanning Materials&x2014;General
- ASTM E889-82(1996) Standard Test Method for Composition or Purity of a Solid Waste Materials Stream
- ASTM E889-82(2023) Standard Test Method for Composition or Purity of a Solid Waste Materials Stream
- ASTM E1428-15a Standard Test Method for Evaluating the Performance of Antimicrobials in or on Polymeric Solids Against Staining by Streptomyce species (A Pink Stain Organism)
- ASTM F1667-01 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
- ASTM F1667-01a Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
- ASTM F1667-02a Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
- ASTM F1667-00 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
- ASTM F1667-02 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
- ASTM F1667-03 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
- ASTM F1667-11 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
- ASTM F1755M-96(2012)e1 Standard Specification for Solid State Bargraph Meters for Shipboard Use [Metric]
- ASTM C1315-07 Standard Specification for Liquid Membrane-Forming Compounds Having Special Properties for Curing and Sealing Concrete
- ASTM D5198-92(1997) Standard Practice for Nitric Acid Digestion of Solid Waste
- ASTM D5658-95(2006) Standard Practice for Sampling Unconsolidated Waste From Trucks
- ASTM D5658-95(2001) Standard Practice for Sampling Unconsolidated Waste From Trucks
- ASTM D5198-09 Standard Practice for Nitric Acid Digestion of Solid Waste
- ASTM D1201-13(2022)e1 Standard Specification for Thermosetting Polyester Molding Compounds
- ASTM D5658-13 Standard Practice for Sampling Unconsolidated Waste From Trucks
- ASTM E1784-97 Standard Test Method for Total Peroxides in Acrylonitrile
- ASTM D6530-00(2006) Standard Test Method for Total Active Biomass in Cooling Tower Waters (Kool Kount Assay; KKA)
- ASTM D6530-00 Standard Test Method for Total Active Biomass in Cooling Tower Waters (Kool Kount Assay; KKA)
- ASTM D4899-99(2004) Standard Practice for Analysis of Vegetable Tanning Materials-General
- ASTM D4899-99(2009) Standard Practice for Analysis of Vegetable Tanning Materials-General
- ASTM D4870-18 Standard Test Method for Determination of Total Sediment in Residual Fuels
- ASTM D4870-22 Standard Test Method for Determination of Total Sediment in Residual Fuels
- ASTM E1784-08 Standard Test Method for Total Peroxides in Acrylonitrile
- ASTM D4906-95(2017) Standard Test Method for Total Solids and Ash Content in Leather Finishing Materials
- ASTM D4906-95(2023) Standard Test Method for Total Solids and Ash Content in Leather Finishing Materials
- ASTM D7245-07 Standard Test Method for Measuring Total Water and Volatiles in Liquid Coatings Which Produce Cure Water Upon Heating
- ASTM D7245-09 Standard Test Method for Measuring Total Water and Volatiles in Liquid Coatings Which Produce Cure Water Upon Heating
- ASTM D7245-07e1 Standard Test Method for Measuring Total Water and Volatiles in Liquid Coatings Which Produce Cure Water Upon Heating
- ASTM D7245-09(2021) Standard Test Method for Measuring Total Water and Volatiles in Liquid Coatings Which Produce Cure Water Upon Heating
- ASTM D7245-09(2014) Standard Test Method for Measuring Total Water and Volatiles in Liquid Coatings Which Produce Cure Water Upon Heating
- ASTM D1336-07(2019) Standard Test Method for Distortion of Yarn in Woven Fabrics
- ASTM D887-13(2022) Standard Practices for Sampling Water-Formed Deposits
- ASTM D1336-07 Standard Test Method for Distortion of Yarn in Woven Fabrics
- ASTM F1667-10 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
- ASTM F1667-11ae1 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
- ASTM F1667-13 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
- ASTM F1667-15 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
- ASTM A1035/A1035M-09 Standard Specification for Deformed and Plain, Low-carbon, Chromium, Steel Bars for Concrete Reinforcement
- ASTM A1035/A1035M-13 Standard Specification for Deformed and Plain, Low-carbon, Chromium, Steel Bars for Concrete Reinforcement
- ASTM A1035/A1035M-13a Standard Specification for Deformed and Plain, Low-Carbon, Chromium, Steel Bars for Concrete Reinforcement
- ASTM D4870-07a Standard Test Method for Determination of Total Sediment in Residual Fuels
- ASTM D4870-07 Standard Test Method for Determination of Total Sediment in Residual Fuels
- ASTM D4870-99 Standard Test Method for Determination of Total Sediment in Residual Fuels
- ASTM D4870-04 Standard Test Method for Determination of Total Sediment in Residual Fuels
- ASTM D4870-09(2014) Standard Test Method for Determination of Total Sediment in Residual Fuels
- ASTM D4870-09 Standard Test Method for Determination of Total Sediment in Residual Fuels
- ASTM C1603-05 Standard Test Method for Measurement of Solids in Water
- ASTM D6117-97(2005) Standard Test Methods for Mechanical Fasteners In Plastic Lumber and Shapes
- ASTM A184/A184M-96 Standard Specification for Fabricated Deformed Steel Bar Mats for Concrete Reinforcement
- ASTM A184/A184M-01 Standard Specification for Fabricated Deformed Steel Bar Mats for Concrete Reinforcement
- ASTM D6117-97 Standard Test Methods for Mechanical Fasteners In Plastic Lumber and Shapes
- ASTM F384-00 Standard Specifications and Test Methods for Metallic Angled Orthopedic Fracture Fixation Devices
- ASTM A184/A184M-19 Standard Specification for Welded Deformed Steel Bar Mats for Concrete Reinforcement
- ASTM F384-17 Standard Specifications and Test Methods for Metallic Angled Orthopedic Fracture Fixation Devices
- ASTM D6117-13e1 Standard Test Methods for Mechanical Fasteners in Plastic Lumber and Shapes
- ASTM D4132-82(1998) Standard Practice for Sampling Phytoplankton with Conical Tow Nets
- ASTM C547-11 Standard Specification for Mineral Fiber Pipe Insulation
- ASTM E884-82(1993) Standard Practice for Sampling Airborne Microorganisms at Municipal Solid-Waste Processing Facilities
- ASTM E2060-22 Standard Guide for Use of Coal Combustion Products for Solidification/Stabilization of Inorganic Wastes
- ASTM D2625-94(1998) Standard Test Method for Endurance (Wear) Life and Load-Carrying Capacity of Solid Film Lubricants (Falex Pin and Vee Method)
- ASTM D4301-05 Standard Test Method for Total Chlorine in Epoxy Resins and Compounds
- ASTM D4301-84(1996) Standard Test Method for Total Chlorine in Epoxy Resins and Compounds
- ASTM D4301-05(2019) Standard Test Method for Total Chlorine in Epoxy Resins and Compounds
- ASTM D4301-05(2013) Standard Test Method for Total Chlorine in Epoxy Resins and Compounds
- ASTM D4842-90(1996) Standard Test Method for Determining the Resistance of Solid Wastes to Freezing and Thawing
- ASTM D5947-02 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
- ASTM D5947-06 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
- ASTM D5947-03 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
- ASTM D5947-96 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
- ASTM D5947-01e1 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
- ASTM D4842-90(2001) Standard Test Method for Determining the Resistance of Solid Wastes to Freezing and Thawing
- ASTM D5947-18 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
- ASTM D5198-17 Standard Practice for Nitric Acid Digestion of Solid Waste
- ASTM D7459-08(2016) Standard Practice for Collection of Integrated Samples for the Speciation of Biomass (Biogenic) and Fossil-Derived Carbon Dioxide Emitted from Stationary Emissions Sources
- ASTM A615/A615M-06 Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
- ASTM A615/A615M-18 Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
- ASTM A1022/A1022M-14a Standard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement
- ASTM A1060/A1060M-10 Standard Specification for Zinc-Coated (Galvanized) Steel Welded Wire Reinforcement, Plain and Deformed, for Concrete
- ASTM A615/A615M-20 Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
- ASTM A615/A615M-06a Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
- ASTM A615/A615M-05a Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
- ASTM A615/A615M-18e1 Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
- ASTM A1022/A1022M-16b Standard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement
- ASTM D6712-17 Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes
- ASTM D2834-95(2008) Standard Test Method for Nonvolatile Matter (Total Solids) in Water-Emulsion Floor Polishes, Solvent-Based Floor Polishes, and Polymer-Emulsion Floor Polishes
- ASTM D1245-84(1999) Standard Practice for Examination of Water-Formed Deposits by Chemical Microscopy
- ASTM D5587-96 Standard Test Method for Tearing Strength of Fabrics by Trapezoid Procedure
- ASTM D1245-84(2007) Standard Practice for Examination of Water-Formed Deposits by Chemical Microscopy
- ASTM D5587-07ae1 Standard Test Method for Tearing Strength of Fabrics by Trapezoid Procedure
- ASTM D1245-17 Standard Practice for Examination of Water-Formed Deposits by Chemical Microscopy
- ASTM D932-20 Standard Practice for Filamentous Iron Bacteria in Water and Water-Formed Deposits
- ASTM D5587-15(2019) Standard Test Method for Tearing Strength of Fabrics by Trapezoid Procedure
- ASTM D4533/D4533M-15(2023) Standard Test Method for Trapezoid Tearing Strength of Geotextiles
- ASTM D2834-95 Standard Test Method for Nonvolatile Matter (Total Solids) in Water-Emulsion Floor Polishes, Solvent-Based Floor Polishes, and Polymer-Emulsion Floor Polishes
- ASTM D2834-95(2001) Standard Test Method for Nonvolatile Matter (Total Solids) in Water-Emulsion Floor Polishes, Solvent-Based Floor Polishes, and Polymer-Emulsion Floor Polishes
- ASTM D2834-95(2002) Standard Test Method for Nonvolatile Matter (Total Solids) in Water-Emulsion Floor Polishes, Solvent-Based Floor Polishes, and Polymer-Emulsion Floor Polishes
- ASTM D2834-95(2015) Standard Test Method for Nonvolatile Matter (Total Solids) in Water-Emulsion Floor Polishes, Solvent-Based Floor Polishes, and Polymer-Emulsion Floor Polishes
- ASTM D2834-95(2022) Standard Test Method for Nonvolatile Matter (Total Solids) in Water-Emulsion Floor Polishes, Solvent-Based Floor Polishes, and Polymer-Emulsion Floor Polishes
- ASTM E2478-06 Standard Practice for Determining Damage-Based Design Criteria for Fiberglass Reinforced Plastics (FRP) Materials
- ASTM E2478-06a Standard Practice for Determining Damage-Based Design Stress for Fiberglass Reinforced Plastic (FRP) Materials Using Acoustic Emission
- ASTM E2122-02 Standard Guide for Conducting In-situ Field Bioassays With Caged Bivalves
- ASTM E2122-02(2007) Standard Guide for Conducting In-situ Field Bioassays With Caged Bivalves
- ASTM D6498-99 Standard Guide for Household Hazardous Waste Training Outline for Household Hazardous Waste Collection Operations
- ASTM D6498-99(2002) Standard Guide for Household Hazardous Waste Training Outline for Household Hazardous Waste Collection Operations
- ASTM D6498-99(2007) Standard Guide for Household Hazardous Waste Training Outline for Household Hazardous Waste Collection Operations
- ASTM D1896-99 Standard Practice for Transfer Molding Test Specimens of Thermosetting Compounds
- ASTM D4823-95(2003)e1 Standard Guide for Core Sampling Submerged, Unconsolidated Sediments
- ASTM D1896-99(2004) Standard Practice for Transfer Molding Test Specimens of Thermosetting Compounds
- ASTM D3987-85(2004) Standard Test Method for Shake Extraction of Solid Waste with Water
- ASTM D3987-85(1999) Standard Test Method for Shake Extraction of Solid Waste with Water
- ASTM D4843-88(1999) Standard Test Method for Wetting and Drying Test of Solid Wastes
- ASTM D4874-95(2006) Standard Test Method for Leaching Solid Material in a Column Apparatus
- ASTM D4823-95(2008) Standard Guide for Core Sampling Submerged, Unconsolidated Sediments
- ASTM E889-82(2009) Standard Test Method for Composition or Purity of a Solid Waste Materials Stream
- ASTM D4843-88(2009) Standard Test Method for Wetting and Drying Test of Solid Wastes
- ASTM D5947-11 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
- ASTM D1015-99(2004) Standard Test Method for Freezing Points of High-Purity Hydrocarbons
- ASTM C309-11 Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete
- ASTM E889-82(2014) Standard Test Method for Composition or Purity of a Solid Waste Materials Stream
- ASTM D5403-93(2021) Standard Test Methods for Volatile Content of Radiation Curable Materials
- ASTM D4843-88(2016) Standard Test Method for Wetting and Drying Test of Solid Wastes
- ASTM D3647-84(1995) Standard Practice for Classifying Reinforced Plastic Pultruded Shapes According to Composition
- ASTM A955/A955M-06 Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement
- ASTM A955/A955M-05a Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement
- ASTM A955/A955M-06a Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement
- ASTM D3917-11 Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes
- ASTM D3917-12 Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes
- ASTM D3647-16 Standard Practice for Classifying Reinforced Plastic Pultruded Shapes According to Composition
- ASTM D6530-19 Standard Test Method for Total Active Biomass in Cooling Tower Waters (Kool Kount Assay; KKA)
- ASTM E1651-94(1999) Standard Test Method for Total Luminous Reflectance Factor by Use of 30/t Integrating-Sphere Geometry
- ASTM A1022/A1022M-14 Standard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement
- ASTM A1022/A1022M-16a Standard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement
- ASTM D4661-09 Standard Test Methods for Polyurethane Raw Materials: Determination of Total Chlorine in Isocyanates
- ASTM A1064/A1064M-18 Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete
- ASTM A1035/A1035M-04e1 Standard Specification for Deformed and Plain, Low-carbon, Chromium, Steel Bars for Concrete Reinforcement
- ASTM A1035/A1035M-06 Standard Specification for Deformed and Plain, Low-carbon, Chromium, Steel Bars for Concrete Reinforcement
- ASTM D6864-10 Standard Specification for Color and Appearance Retention of Solid Colored Plastic Siding Products
- ASTM A1035/A1035M-19 Standard Specification for Deformed and Plain, Low-Carbon, Chromium, Steel Bars for Concrete Reinforcement
- ASTM A1035/A1035M-05 Standard Specification for Deformed and Plain, Low-carbon, Chromium, Steel Bars for Concrete Reinforcement
- ASTM D6864-11 Standard Specification for Color and Appearance Retention of Solid Colored Plastic Siding Products
- ASTM A1035/A1035M-20 Standard Specification for Deformed and Plain, Low-Carbon, Chromium, Steel Bars for Concrete Reinforcement
- ASTM A1060/A1060M-16a Standard Specification for Zinc-Coated (Galvanized) Steel Welded Wire Reinforcement, Plain and Deformed, for Concrete
- ASTM C1621/C1621M-17(2023) Standard Test Method for Passing Ability of Self-Consolidating Concrete by J-Ring
- ASTM E1109-18 Standard Test Method for Determining the Bulk Density of Solid Waste Fractions
- ASTM D7348-07 Standard Test Methods for Loss on Ignition (LOI) of Solid Combustion Residues
- ASTM D3987-06 Standard Test Method for Shake Extraction of Solid Waste with Water
- ASTM C449/C449M-00 Standard Specification for Mineral Fiber Hydraulic-Setting Thermal Insulating and Finishing Cement
- ASTM D1896/D1896M-10 Standard Practice for Transfer Molding Test Specimens of Thermosetting Compounds
- ASTM E1109-19 Standard Test Method for Determining the Bulk Density of Solid Waste Fractions
- ASTM D7348-08 Standard Test Methods for Loss on Ignition (LOI) of Solid Combustion Residues
- ASTM D7348-08e1 Standard Test Methods for Loss on Ignition (LOI) of Solid Combustion Residues
- ASTM D7348-21 Standard Test Methods for Loss on Ignition (LOI) of Solid Combustion Residues
- ASTM D4359-90(2012) Standard Test Method for Determining Whether a Material Is a Liquid or a Solid
- ASTM D3987-12 Standard Practice for Shake Extraction of Solid Waste with Water
- ASTM D5403-93(2013) Standard Test Methods for Volatile Content of Radiation Curable Materials
- ASTM D2625-94(2003) Standard Test Method for Endurance (Wear) Life and Load-Carrying Capacity of Solid Film Lubricants (Falex Pin and Vee Method)
- ASTM D2625-94(2010) Standard Test Method for Endurance (Wear) Life and Load-Carrying Capacity of Solid Film Lubricants (Falex Pin and Vee Method)
- ASTM D6584-08 Standard Test Method for Determination of Free and Total Glycerin in B-100 Biodiesel Methyl Esters By Gas Chromatography
- ASTM D6584-21 Standard Test Method for Determination of Total Monoglycerides, Total Diglycerides, Total Triglycerides, and Free and Total Glycerin in B-100 Biodiesel Methyl Esters by Gas Chromatography
- ASTM D932-89(2007) Standard Test Method for Iron Bacteria in Water and Water-Formed Deposits
- ASTM D4533-91(1996) Standard Test Method for Trapezoid Tearing Strength of Geotextiles
- ASTM F2062-00(2006) Standard Specification for Square Drive Interconnections on Surgical Instruments
- ASTM F2062-00 Standard Specification for Square Drive Interconnections on Surgical Instruments
- ASTM D4032-94 Standard Test Method for Stiffness of Fabric by the Circular Bend Procedure
- ASTM D4032-94(2001) Standard Test Method for Stiffness of Fabric by the Circular Bend Procedure
- ASTM D4533-04 Standard Test Method for Trapezoid Tearing Strength of Geotextiles
- ASTM E1201-87(1998) Standard Practice for Sampling Zooplankton with Conical Tow Nets
- ASTM D4032-08 Standard Test Method for Stiffness of Fabric by the Circular Bend Procedure
- ASTM D4032-08(2012) Standard Test Method for Stiffness of Fabric by the Circular Bend Procedure
- ASTM E1201-19 Standard Practice for Sampling Zooplankton with Conical Tow Nets
- ASTM E1201-87(2012) Standard Practice for Sampling Zooplankton with Conical Tow Nets
- ASTM D93-18 Standard Test Method for Iron Bacteria in Water and Water-Formed Deposits
- ASTM D4848-98(2018) Standard Terminology Related to Force, Deformation and Related Properties of Textiles
- ASTM D4533/D4533M-15 Standard Test Method for Trapezoid Tearing Strength of Geotextiles
- ASTM D4032-08(2016) Standard Test Method for Stiffness of Fabric by the Circular Bend Procedure
- ASTM D4374-00 Standard Test Methods for Cyanides in Water--Automated Methods for Total Cyanide, Acid dissociable Cyanide, and Thiocyanate
- ASTM F2063-18 Standard Specification for Wrought Nickel-Titanium Shape Memory Alloys for Medical Devices and Surgical Implants
- ASTM D7892-22 Standard Test Method for Determination of Total Organic Halides, Total Non-Methane Hydrocarbons, and Formaldehyde in Hydrogen Fuel by Gas Chromatography/Mass Spectrometry
- ASTM D7675-11 Standard Test Method for Test Method for the Determination of Total Hydrocarbons in Hydrogen by FID Based Total Hydrocarbon (THC) Analyzer
- ASTM D6530-00(2013) Standard Test Method for Total Active Biomass in Cooling Tower Waters lpar;Kool Kount Assay; KKArpar;
- ASTM F384-06 Standard Specifications and Test Methods for Metallic Angled Orthopedic Fracture Fixation Devices
- ASTM F384-06e1 Standard Specifications and Test Methods for Metallic Angled Orthopedic Fracture Fixation Devices
- ASTM A1064/A1064M-10 Standard Specification for Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete
- ASTM A1064/A1064M-12 Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete
- ASTM D2621-87(2011) Standard Test Method for Infrared Identification of Vehicle Solids From Solvent-Reducible Paints
- ASTM F384-12 Standard Specifications and Test Methods for Metallic Angled Orthopedic Fracture Fixation Devices
- ASTM A1064/A1064M-10e1 Standard Specification for Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete
- ASTM D7498/D7498M-09(2022) Standard Test Method for Vertical Strip Drains Using a Large-Scale Consolidation Test
- ASTM A1064/A1064M-13 Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete
- ASTM C1308-21 Standard Test Method for Accelerated Leach Test for Measuring Contaminant Releases From Solidified Waste
- ASTM D4374-06 Standard Test Methods for Cyanides in Water-Automated Methods for Total Cyanide, Weak Acid Dissociable Cyanide, and Thiocyanate
- ASTM D5231-92(1998) Standard Test Method for Determination of the Composition of Unprocessed Municipal Solid Waste
- ASTM C449-07(2019) Standard Specification for Mineral Fiber Hydraulic-Setting Thermal Insulating and Finishing Cement
- ASTM C309-19 Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete
- ASTM D5587-07a Standard Test Method for Tearing Strength of Fabrics by Trapezoid Procedure
- ASTM D5587-07 Standard Test Method for Tearing Strength of Fabrics by Trapezoid Procedure
- ASTM D6707-06(2011) Standard Specification for Circular-Knit Geotextile for Use in Subsurface Drainage Applications
- ASTM E776-16 Standard Test Method for Determination of Forms of Chlorine in Refuse-Derived Fuel
- ASTM D5587-14 Standard Test Method for Tearing Strength of Fabrics by Trapezoid Procedure
- ASTM D5565-95(2001) Standard Test Method for Determination of the Solidification Point of Fatty Acids Contained in Animal, Marine, and Vegetable Fats and Oils
- ASTM D5565-95 Standard Test Method for Determination of the Solidification Point of Fatty Acids Contained in Animal, Marine, and Vegetable Fats and Oils
- ASTM D5565-95(2011) Standard Test Method for Determination of the Solidification Point of Fatty Acids Contained in Animal, Marine, and Vegetable Fats and Oils
- ASTM F1839-01(2007) Standard Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopedic Devices and Instruments
- ASTM F1839-01 Standard Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopaedic Devices and Instruments
- ASTM F1839-08e1 Standard Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopedic Devices and Instruments
- ASTM D2625-94(2015) Standard Test Method for Endurance (Wear) Life and Load-Carrying Capacity of Solid Film Lubricants (Falex Pin and Vee Method)
- ASTM D4698-92(2001) Standard Practice for Total Digestion of Sediment Samples for Chemical Analysis of Various Metals
- ASTM D4698-21 Standard Practice for Total Digestion of Sediment Samples for Chemical Analysis of Various Metals
- ASTM D4698-92(2013) Standard Practice for Total Digestion of Sediment Samples for Chemical Analysis of Various Metals
- ASTM D4698-92(2007) Standard Practice for Total Digestion of Sediment Samples for Chemical Analysis of Various Metals
- ASTM D1053-92a(2007) Standard Test Methods for Rubber Property-Stiffening at Low Temperatures: Flexible Polymers and Coated Fabrics
- ASTM D4905-99(2020) Standard Practice for Preparation of Solution of Solid, Pasty and Powdered Vegetable Tannin Extracts
- ASTM D1053-92a(2012) Standard Test Methods for Rubber Propertymdash;Stiffening at Low Temperatures: Flexible Polymers and Coated Fabrics
- ASTM D4905-99(2016) Standard Practice for Preparation of Solution of Solid, Pasty and Powdered Vegetable Tannin Extracts
- ASTM A1060/A1060M-15 Standard Specification for Zinc-Coated (Galvanized) Steel Welded Wire Reinforcement, Plain and Deformed, for Concrete
- ASTM A1060/A1060M-16 Standard Specification for Zinc-Coated (Galvanized) Steel Welded Wire Reinforcement, Plain and Deformed, for Concrete
- ASTM D8131/D8131M-17 Standard Practice for Tensile Properties of Tapered and Stepped Joints of Polymer Matrix Composite Laminates
- ASTM D5224-00 Standard Practice for Compression Molding Test Specimens of Thermosetting Molding Compounds
- ASTM D3419-00(2006) Standard Practice for In-Line Screw-Injection Molding Test Specimens From Thermosetting Compounds
- ASTM D5732-95 Standard Test Method for Stiffness of Nonwoven Fabrics Using the Cantilever Test
- ASTM D5732-95(2001) Standard Test Method for Stiffness of Nonwoven Fabrics Using the Cantilever Test
- ASTM D3419-00 Standard Practice for In-Line Screw-Injection Molding Test Specimens From Thermosetting Compounds
- ASTM D3419-93 Standard Practice for In-Line Screw-Injection Molding Test Specimens From Thermosetting Compounds
- ASTM D6010-96 Standard Practice for Closed Vessel Microwave Solvent Extraction of Organic Compounds from Solid Matrices
- ASTM D5224-12(2019) Standard Practice for Compression Molding Test Specimens of Thermosetting Molding Compounds
- ASTM D3123-09(2017) Standard Test Method for Spiral Flow of Low-Pressure Thermosetting Molding Compounds
- ASTM D341-09(2015) Standard Practice for Viscosity-Temperature Charts for Liquid Petroleum Products
- ASTM D934-80(1999) Standard Practices for Identification of Crystalline Compounds in Water-Formed Deposits By X-Ray Diffraction
- ASTM D6584-10ae1 Standard Test Method for Determination of Total Monoglyceride, Total Diglyceride, Total Triglyceride, and Free and Total Glycerin in B-100 Biodiesel Methyl Esters by Gas Chromatography
- ASTM D6584-10a Standard Test Method for Determination of Total Monoglyceride, Total Diglyceride, Total Triglyceride, and Free and Total Glycerin in B-100 Biodiesel Methyl Esters by Gas Chromatography
- ASTM D6584-13 Standard Test Method for Determination of Total Monoglycerides, Total Diglycerides, Total Triglycerides, and Free and Total Glycerin in B-100 Biodiesel Methyl Esters by Gas Chromatography
- ASTM D6584-17 Standard Test Method for Determination of Total Monoglycerides, Total Diglycerides, Total Triglycerides, and Free and Total Glycerin in B-100 Biodiesel Methyl Esters by Gas Chromatography
- ASTM D6707-06 Standard Specification for Circular-Knit Geotextile for Use in Subsurface Drainage Applications
- ASTM D5587-05 Standard Test Method for Tearing Strength of Fabrics by Trapezoid Procedure
- ASTM D5587-96(2003) Standard Test Method for Tearing Strength of Fabrics by Trapezoid Procedure
- ASTM D5587-03 Standard Test Method for Tearing Strength of Fabrics by Trapezoid Procedure
- ASTM F1377-04 Standard Specification for Cobalt-28Chromium-6Molybdenum Powder for Coating of Orthopedic Implants (UNS R30075)
- ASTM D6707-01 Standard Specification for Circular-Knit Geotextile for Use in Subsurface Drainage Applications
- ASTM F565-04 Standard Practice for Care and Handling of Orthopedic Implants and Instruments
- ASTM F565-00 Standard Practice for Care and Handling of Orthopedic Implants and Instruments
- ASTM D5587-08 Standard Test Method for Tearing Strength of Fabrics by Trapezoid Procedure
- ASTM F565-04(2009)e1 Standard Practice for Care and Handling of Orthopedic Implants and Instruments
- ASTM D4533-11 Standard Test Method for Trapezoid Tearing Strength of Geotextiles
- ASTM F2322-03 Standard Test Methods for Physical Assault on Vertical Fixed Barriers for Detention and Correctional Facilities
- ASTM D6402-99(2009) Standard Test Method for Determing Soluble Solids and Insolubles in Extracts of Vegetable Tanning Materials
- ASTM F129-97(2008) Standard Practice for Amount of Ink Deposit on Carbon Paper and Inked Ribbons, Other Than Fabric Type
- ASTM A1064/A1064M-09 Standard Specification for Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete
- ASTM E2060-06 Standard Guide for Use of Coal Combustion Products for Solidification/Stabilization of Inorganic Wastes
- ASTM D5231-92(2003) Standard Test Method for Determination of the Composition of Unprocessed Municipal Solid Waste
- ASTM D6050-97(2003)e1 Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
- ASTM D6050-97 Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
- ASTM E2060-00 Standard Guide for Use of Coal Combustion Products for Solidification/Stabilization of Inorganic Wastes
- ASTM D176-07 Standard Test Methods for Solid Filling and Treating Compounds Used for Electrical Insulation
- ASTM D176-96 Standard Test Methods for Solid Filling and Treating Compounds Used for Electrical Insulation
- ASTM D6050-21 Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
- ASTM D4503-86(1998) Standard Practice for Dissolution of Solid Waste by Lithium Metaborate Fusion
Taiwan Provincial Standard of the People's Republic of China, Total Solids Standard
- CNS 3448-2007 Method of test for milk and milk products - Determination of total solids
- CNS 9430-1982 Method of Test for Beverage: Determination of Total Solids and Moisture
RU-GOST R, Total Solids Standard
International Organization for Standardization (ISO), Total Solids Standard
- ISO 13580:2005 Yogurt - Determination of total solids content (Reference method)
- ISO 13580:2002|IDF 151:2005 Determination of total solid content of yogurt (reference method)
- ISO 6734:1989 Sweetened Condensed Milk - Determination of Total Solids Content (Reference Method) First Edition
- ISO 5534:2004 Cheese and processed cheese - Determination of the total solids content (Reference method)
- ISO 3728:2004 Ice-cream and milk ice - Determination of total solids content (Reference method)
- ISO 5534:1985 Cheese and processed cheese; Determination of total solids content (Reference method)
- ISO 3728:1977 Ice cream and milk ice; Determination of total solids content (Reference method)
- ISO 3728:2004|IDF 70:2004 Determination of total solid content of ice cream and milk jelly (reference method)
- ISO 5534:2004|IDF 4:2004 Determination of total solid content of cheese and melted cheese (reference method)
- ISO 6734:2010 Sweetened condensed milk - Determination of total solids content (Reference method)
- ISO Guide 35:2017 Certification of reference materials — General and statistical principles
- ISO 6731:2010|IDF 21:2010 Milk, cream and evaporated milk — Determination of total solids content (Reference method)
- ISO 6731:2010 Milk, cream and evaporated milk - Determination of total solids content (Reference method)
- ISO 18134-1:2015 Solid biofuels - Determination of moisture content - Oven dry method - Part 1: Total moisture - Reference method
- ISO 14411-2:2020 Preparation of particulate reference materials — Part 2: Polydisperse spherical particles
商业部, Total Solids Standard
Danish Standards Foundation, Total Solids Standard
Society of Automotive Engineers (SAE), Total Solids Standard
- SAE AS44074/2-1989 High Speed Ring Bus (Hsrb) Standard
- SAE AS4075-1988 HIGH SPEED RING BUS (HSRB) STANDARD
- SAE AIR4289-2002 Handbook For The SAE AS4075 High Speed Ring Bus Standard
- SAE AIR4289-1995 Handbook For The SAE AS4075 High Speed Ring Bus Standard
- SAE AIR4289A-2012 Handbook for the SAE AS4075 High Speed Ring Bus Standard
- SAE J1957-2000 Central High Mounted Stop Lamp Standard for Vehicles Less than 2032 mm Overall Width
- SAE AS4209B-1997 FITTING END ASSEMBLY, INTERNAL THREAD, RETAINED NUT, BEAM SEAL, DESIGN STANDARD
- SAE AS3219A-2012 Ring, Retaining, Spiral, Minimum Distortion, Dimensional and Acceptance Standard For
- SAE AS1895/1D-1996 Coupling, V-Retainer, Single Latch, Type I Standard Profile
- SAE AS5385C-2007 (R) Cargo Restraint Straps - Design Criteria and Testing Methods
- SAE AS1656C-2007 FITTING END, THREADLESS - FLEXIBLE, FIXED CAVITY, SELF-BONDING, MALE AND FEMALE DESIGN STANDARD
SAE - SAE International, Total Solids Standard
CZ-CSN, Total Solids Standard
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Total Solids Standard
- GB/T 15049.1-1994 General specification for preparing the geometry files of CAD standard parts
- GB 34330-2017 Identification standards for solid wastes Generalrules
- GB 7918.1-1987 General rules for microbiological standard test methods for cosmetics
- GB 15562.2-1995 Graphical signs for environmental protectior solid waste storage (disposal) site
- GB 14938-1994 General principles of diagnostic criteria and technical management of food poisoning
- GB/T 7918.2-1987 Standard methods of microbiological examination for cosmetics--Standard plate count
- GB 7918.2-1987 Cosmetic microbiology standard test method for determination of total bacterial count
- GB 4789.1-2010 National food safety standard Food microbiological examination:General guidelines
- GB 5085-1985 Pollution control standard of solid waste in nonferrous metal industry
- GB 14883.1-2016 National Food Safety Standard General Rules for the Inspection of Radioactive Substances in Food
- GB 12711-1991 Standard of safety for low and intermediate-level solid radioactive wastes packages
- GB 30485-2013 Standard for pollution control on co-processing of solid wastes in cement kiln
- GB 4789.2-2010 National food safety standard Food microbiological examination:Aerobic plate count
- GB 4789.2-2016 National Food Safety Standard Food Microbiological Inspection Determination of Total Bacterial Colony
- GB 4789.2-2022 National Food Safety Standard Food Microbiological Inspection Determination of Total Bacterial Colony
- GB 18599-2001 Standard for pollution on the storage and disposal site for general industrial solid wastes
- GB/T 5087-1985 Test method standard for corrosivity of solid waste in nonferrous metal industry
- GB/T 7023-2011 Standard test method for leachability of low and intermediate level solidified radioactive waste forms
Korean Agency for Technology and Standards (KATS), Total Solids Standard
- KS H ISO 5534:2006 Cheese and processed cheese-Determination of the total solids content(Reference method)
- KS H ISO 3728:2006 Ice-cream and milk ice－Determination of total solids content(Reference method)
- KS H ISO 6734:2006 Sweetened condensed milk－Determination of total solids content(Reference method)
- KS M 6638-2016(2021) Determination methods of total solids, pH and viscosity and judgement of degree of precure of compounded latices
- KS M 6638-1982 Determination methods of total solids, pH and viscosity and judgement of degree of precure of compounded latices
- KS H ISO 6731:2006 Milk, cream and evaporated milk－Determination of total solids content(Reference method)
- KS A ISO 12790-1-2012(2022) Radiation protection－Performance criteria for radiobioassay－Part 1：General principles
- KS A ISO 12790-1-2012(2017) Radiation protection－Performance criteria for radiobioassay－Part 1：General principles
- KS M ISO 10307-2:2011 Petroleum products-Total sediment in residual fuel oils-Part 2:Determination using standard procedures for ageing
- KS M ISO 10307-2:2014 Petroleum products — Total sediment in residual fuel oils — Part 2: Determination using standard procedures for ageing
- KS X ISO 12645-2006(2016) Graphic technology－Process control－Certified reference material for opaque area calibration of transmission densitometers
- KS X ISO 12645-2006(2021) Graphic technology－Process control－Certified reference material for opaque area calibration of transmission densitometers
Association Francaise de Normalisation, Total Solids Standard
German Institute for Standardization, Total Solids Standard
- DIN EN ISO 5534:2004 Cheese and processed cheese - Determination of the total solids content (Reference method) (ISO 5534:2004); German version EN ISO 5534:2004
- DIN 18012:2018-04 Service connections for buildings - General planning criteria
- DIN CEN/TR 16208:2011 Biobased products - Overview of standards; German version CEN/TR 16208:2011
FMVSS - Federal Motor Vehicle Safety Standards, Total Solids Standard
KE-KEBS, Total Solids Standard
- KS 05-13 Pt.1-2-1976 KENYA STANDARD DETERMINATION OF TOTAL SOLIDS IN MILK
- KS 08-48-1979 KENYA STANDARD DETERMINATION OF RESISTANCE TO TEARING OF WOVEN FABRICS BY WING-RIP TECHNIQUE
Standard Association of Australia （SAA）, Total Solids Standard
- AS 2300.5.3:1991 Methods of chemical and physical testing for the dairying industry - Condensed milk - Determination of total milk solids
- ASRM 012B-3-2005 Reference material - Coal sample having total sulfur of 0.68%
- ASCRM 012D-2-1998 Certified reference material - Coal sample having total sulfur of 5.21%
- ASCRM 012C-3-2008 Certified reference material - Coal sample having total sulfur of approximately 1.22%
European Committee for Standardization (CEN), Total Solids Standard
- EN ISO 5534:2004 Cheese and processed cheese - Determination of the total solids content (Reference method)
- EN ISO 5534:2004/AC:2013 Cheese and processed cheese - Determination of the total solids content (Reference method) - Technical Corrigendum 1 (ISO 5534:2004/Cor 1:2013)
BELST, Total Solids Standard
- STB GOST R 53156-2012 Confectonery. Methods of determination the contain of the total dry solids of cocoa in chocolate products
CEN - European Committee for Standardization, Total Solids Standard
- PREN 15603-2013 Energy performance of buildings - Overarching standard EPBD
HU-MSZT, Total Solids Standard
GB-REG, Total Solids Standard
US-FCR, Total Solids Standard
中华人民共和国国家卫生和计划生育委员会, Total Solids Standard
- GB/T 7918.1-1987 Standard methods of microbiological examination for cosmetics--General rules
Japanese Industrial Standards Committee (JISC), Total Solids Standard
- JIS Q 0035:1997 Certification of reference materials -- General and statistical principles
Fujian Provincial Standard of the People's Republic of China, Total Solids Standard
- DB35/ 321-1999 Minjiang River Water Pollutant Total Discharge Control Standard
Professional Standard - Agriculture, Total Solids Standard
- GB 15562.2-1995(XG1-2023) Environmental protection pictorial sign - solid waste storage (disposal) site
- SN/T 5454-2023 Technical requirements for compiling standards for vector biomorphological identification
Occupational Health Standard of the People's Republic of China, Total Solids Standard
- GBZ 71-2002 Diagnostic Criteria of Occupational Acute Chemicals Poisoning(General Rules)
Institute of Electrical and Electronics Engineers (IEEE), Total Solids Standard
- IEEE Std 1275.2-1994 IEEE Standard for Boot (Initialization Configuration) Firmware:Bus Supplement for IEEE 1496(SBus)
- IEEE Std 1275.4-1995 IEEE Standard for Boot (Initialization Configuration) Firmware: Bus Supplement for IEEE 896 (Futurebus+(R))
- IEEE/ANSI 802.4-1990 IEEE Standard for Information processing systems -- Local area networks --Part 4: Standard for Token-Passing Bus Access Method and Physical Layer Specifications
- ANSI/IEEE Std 802.4-1990 IEEE Standard for Information processing systems -- Local area networks --Part 4: Standard for Token-Passing Bus Access Method and Physical Layer Specifications
American National Standards Institute （ANSI), Total Solids Standard
US-CFR-file, Total Solids Standard
- CFR 40-60.283a-2014 Protection of Environment. Part60:Standards of performance for new stationary sources. Section60.283a:Standard for total reduced sulfur (TRS).
- CFR 40-60.382-2014 Protection of Environment. Part60:Standards of performance for new stationary sources. Section60.382:Standard for particulate matter.
- CFR 40-60.472-2014 Protection of Environment. Part60:Standards of performance for new stationary sources. Section60.472:Standards for particulate matter.
- CFR 40-60.282a-2014 Protection of Environment. Part60:Standards of performance for new stationary sources. Section60.282a:Standard for filterable particulate matter.
Professional Standard - Military and Civilian Products, Total Solids Standard
- WJ 2643-2004 Specification for conductivity standard material of solid propellants and explosives
- WJ 2642-2004 Standard material specification for dielectric constant of solid propellants and explosives
VE-FONDONORMA, Total Solids Standard
Professional Standard - Urban Construction, Total Solids Standard
- CJ 26.5-1991 Municipal sewage water quality inspection method Standard gravimetric method for total solids
Underwriters Laboratories (UL), Total Solids Standard
VN-TCVN, Total Solids Standard
- TCVN 7733-2007 Water quality.Effluent standards for leachate of solid waste landfill sites
- TCVN 6560-2005 Health care solid waste incinerators.Emission standards for health care solid waste incinerators.Permissible limits
Beijing Provincial Standard of the People's Republic of China, Total Solids Standard
- DB11/ 1056-2013 Air Pollutant Emission Standards for Stationary Internal Combustion Engines
- DB11/ 847-2011 Air Pollutant Emission Standards for Stationary Gas Turbines
检验方法与规程专业（微生物）, Total Solids Standard
- GB 4789.1-2016 National Food Safety Standard General Rules for Microbiological Inspection of Food
国家市场监督管理总局、中国国家标准化管理委员会, Total Solids Standard
- GB 12711-2018 Standard of safety for low and intermediate level solid radioactive waste packages
- GB 18599-2020 Standard for pollution control on the non-hazardous industrial solid waste storage and landfill
Jiangsu Provincial Standard of the People's Republic of China, Total Solids Standard
- DB32/ 3967-2021 Air Pollutant Emission Standards for Stationary Gas Turbines
Group Standards of the People's Republic of China, Total Solids Standard
- T/CECS 539-2018 Standard for determination of benzene and its analogies and total volatile organic compounds in indoor air
- T/OTOP 1033-2023 Methodology for well-facilitated farmland crops carbon sink towards convenient trading
- T/GDCKCJH 026-2020 Performance index and test methods for polymer quasi-solid-state electrolyte power battery
Shandong Provincial Standard of the People's Republic of China, Total Solids Standard
- DB37/ 1996-2011 Integrated Emission Standards for Air Particulate Matter from Stationary Sources in Shandong Province
Guangdong Provincial Standard of the People's Republic of China, Total Solids Standard
- DB44/T 2367-2022 Comprehensive emission standards for volatile organic compounds from stationary pollution sources
- DB44/ 2367-2022 Comprehensive emission standards for volatile organic compounds from stationary pollution sources
Professional Standard - Hygiene , Total Solids Standard
- WS/T 9-1996 Diagnostic criteria and principle of management for food poisoning of proteus
US-RTCA, Total Solids Standard
- RTCA DO-291A-2009 Interchange Standards for Terrain, Obstacle, and Aerodrome Mapping Data
- RTCA DO-291B-2011 Interchange Standards for Terrain, Obstacle, and Aerodrome Mapping Data
- RTCA DO-291C-2015 Interchange Standards for Terrain, Obstacle, and Aerodrome Mapping Data
IX-EU/EC, Total Solids Standard
- M 298-2000 MANDATE TO CEN FOR STANDARDISATION IN THE FIELD OF SOLID BIOFUELS
Indonesia Standards, Total Solids Standard
- SNI ASTM C309:2012 Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete
AASHTO - American Association of State Highway and Transportation Officials, Total Solids Standard
- M 148-2005 Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete
- PP 69-2014 Standard Practice for Determining Pavement Deformation Parameters and Gross Slope from Collected Transverse Profiles
- M148-1991 Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete (ASTM C309-93)
- M221M/M221-1993 Standard Specification for Steel Welded Wire Fabric@ Deformed for Concrete Reinforcement (Eighteenth Edition; ASTM A497-90b)
The American Road & Transportation Builders Association, Total Solids Standard
- AASHTO M 322M_M 322-2007 Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement
- AASHTO PP 69-2014 Standard Practice for Determining Pavement Deformation Parameters and Gross Slope from Collected Transverse Profiles
PH-BPS, Total Solids Standard
- PNS ASTM C309:2021 Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete
Professional Standard - Electron, Total Solids Standard
- SJ/T 9569.1-1995 Quality grading standard for UYF cores made of magnetic oxides
- SJ/T 9569.2-1995 Quality grading standard for E cores made of magnetic oxides
- SJ/Z 9021.3-1987 Mechanical standardization of semiconductor components Part 3 General rules for the preparation of outline drawings of integrated circuits
IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Total Solids Standard
- IEEE 1275.4-1995 Standard for Boot (Initialization Configuration) Firmware: Bus Supplement for IEEE 896 (Futurebus+) (IEEE Computer Society Document)
ZA-SANS, Total Solids Standard
- SANS 4374:2007 Standard test methods for cyanides in water - Automated methods for total cyanide, weak acid dissociable cyanide, and thiocyanate
Sichuan Provincial Standard of the People's Republic of China, Total Solids Standard
- DB51/ 2377-2017 Emission Standards of Volatile Organic Compounds in the Air from Stationary Pollution Sources in Sichuan Province
RO-ASRO, Total Solids Standard
- STAS 10463/1-1975 ISO trapezoidal screw threads SOLID GAUGES AND REFERENCE GAUGES FOR TRAPEZOIDAL SCREW THREADS Manufacturing and wear tolerances
- STAS 10463/3-1985 ISO trapezoidal threades SOLID RING GAUGES FOR SCREW THREADS WITH DIAMETERS BETWEEN 8...120 mm Dimensions
API - American Petroleum Institute, Total Solids Standard
- API PUBL 4595-1995 Criteria for pH in Onshore Solid Waste Management in Exploration and Production Operations
Association of German Mechanical Engineers, Total Solids Standard
- VDI 4407-2009 Decision criteria for the choice of returnable transport items in the shape of transport packaging
International Electrotechnical Commission (IEC), Total Solids Standard
- IEC 61158-2:1993 Fieldbus standard for use in industrial control systems; part 2: physical layer specification and service definition
International Telecommunication Union (ITU), Total Solids Standard
- ITU-R F.1494-2000 Interference Criteria to Protect the Fixed Service from Time Varying Aggregate Interference from Other Services Sharing the 10.7-12.75 GHz Band on a Co-Primary Basis
- ITU-R F.1495-1-2007 Interference criteria to protect the fixed service from time varying aggregate interference from other radiocommunication services sharing the 17.7-19.3 GHz band on a co-primary basis
CU-NC, Total Solids Standard
- NC 93-01-33-1989 Standards System for Environment Protection. Hydrosphere. Determination of Volatile, Fixed and Total Wastes in Waters