ZH
RU
ES

Methods for Testing Toughness

Methods for Testing Toughness, Total:499 items.

In the international standard classification, Methods for Testing Toughness involves: Cutting tools, Waxes, bituminous materials and other petroleum products, Testing of metals, Ceramics, Textile fibres, Products of the textile industry, Sports equipment and facilities, Conducting materials, Construction materials, Glass, Welding, brazing and soldering, Paper and board, Wood-based panels, Continuous handling equipment, Materials for the reinforcement of composites, Plastics, Paint ingredients, Materials for aerospace construction, Paints and varnishes, Road engineering, Powder metallurgy, Cork and cork products, Rubber, Products of non-ferrous metals, Non-textile floor coverings, Reinforced plastics, Optics and optical measurements, Pipeline components and pipelines, Elements of buildings, Biology. Botany. Zoology, Rubber and plastics products, Protection of and in buildings, Leather technology, Surface treatment and coating, Test conditions and procedures in general, Microbiology, Animal feeding stuffs, Chipless working equipment, General methods of tests and analysis for food products, Medical sciences and health care facilities in general, Alarm and warning systems, Non-ferrous metals, Wood, sawlogs and sawn timber, Non-destructive testing, Sacks. Bags, Metrology and measurement in general, Farming and forestry, Occupational safety. Industrial hygiene, Measurement of fluid flow, Tea. Coffee. Cocoa, Quality, Characteristics and design of machines, apparatus, equipment, Mechanical testing, Electricity. Magnetism. Electrical and magnetic measurements, Special measuring equipment for use in telecommunications, Geology. Meteorology. Hydrology, Fuels, Woodworking equipment, Home textiles. Linen, Optoelectronics. Laser equipment, Fluid storage devices, Diagnostic, maintenance and test equipment, Sterilization and disinfection, Iron and steel products, Thermodynamics and temperature measurements, Veterinary medicine, Electronic components in general, Components for electrical equipment, Environmental testing, Protection against fire, Packaging and distribution of goods in general, Pesticides and other agrochemicals, Insulating fluids, Power stations in general, Resistors, Analytical chemistry.

Professional Standard - Aerospace, Methods for Testing Toughness

QJ 990.7-1986 Coating inspection method Coating flexibility inspection method
QJ 20003-2011 Test method for magnetic properties of spacecraft

CH-SNV, Methods for Testing Toughness

SNV 81110-1942 Textiles — Tests for colour fastness Section G01: Colour fastness to nitrogen oxides
SNV 70101-1937

Professional Standard - Machinery, Methods for Testing Toughness

JB/T 12616-2016 Inspection methods of fracture toughness for hardmetals tool base material
JB/T 10646-2006 Super abrasive Determination of thermal impact toughness of diamond
JB/T 6571-1993 Method for measuring impact ductility of man-made diamond and borazon
JB/T 10987-2010 Superabrasive-Determination of toughness index of synthetic diamond
JB/T 12562-2015 Low pressure die-casting machine.Testing methods of technology capability
JB/T 8283-1999 Methods for testing the operating characteristics of acoustic emission instrumentation
JB/T 5525-2011 Non-destructive testing instruments characteristics measured method for one-channel eddy current testing instrument
JB/T 12607-2016 Inspection methods for performance parameters of superhard tools material
JB/T 12613-2016 Inspection methods for performance parameters of ceramic tools material
JB/T 12457-2015 Non-destructive testing instruments.Testing method of X-ray delector for circuit board detection
JB/T 11606-2013 Non-destructive testing instruments.Metal magnetic memory instrument verification

American Society for Testing and Materials (ASTM), Methods for Testing Toughness

ASTM D5801-95(2006) Standard Test Method for Toughness and Tenacity of Bituminous Materials
ASTM D5801-17 Standard Test Method for Toughness and Tenacity of Asphalt Materials
ASTM E1820-18ae1 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-20a Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-18 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-06 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-01 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-05 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-05a Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-16 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-20b Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-20 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-18a Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-22 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-15ae1 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-20ae1 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-99a Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-20e1 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-17a Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-17 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-21 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-23 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-23a Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-22e1 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-15 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-11e1 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-11e2 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-06e1 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-08 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-08a Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-09 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-09e1 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-11 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-13e1 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-23b Standard Test Method for Measurement of Fracture Toughness
ASTM D5801-12 Standard Test Method for Toughness and Tenacity of Bituminous Materials
ASTM C711-93(1997) Standard Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants
ASTM C711-03(2009) Standard Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants
ASTM C711-14 Standard Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants
ASTM F911-85(1994) Standard Test Method for Flexibility of Running Shoes (Withdrawn 2002)
ASTM F2031-05 Standard Test Method for Measurement of Arrow Shaft Static Spine (Stiffness)
ASTM F2031-00 Standard Test Method for Measurement of Arrow Shaft Static Spine (Stiffness)
ASTM F2031-05(2010) Standard Test Method for Measurement of Arrow Shaft Static Spine (Stiffness)
ASTM F2031-05(2014) Standard Test Method for Measurement of Arrow Shaft Static Spine (Stiffness)
ASTM E190-92(2003) Standard Test Method for Guided Bend Test for Ductility of Welds
ASTM D3499-19 Standard Test Method for Toughness of Wood Structural Panels
ASTM D3499-94 Standard Test Method for Toughness of Wood-Based Structural Panels
ASTM D3499-94(2005) Standard Test Method for Toughness of Wood-Based Structural Panels
ASTM D3499-94(2000) Standard Test Method for Toughness of Wood-Based Structural Panels
ASTM D34-91(1999) Standard Guide for Chemical Analysis of White Pigments
ASTM B106-08(2019) Standard Test Methods for Flexivity of Thermostat Metals
ASTM E1820-15a Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-13 Standard Test Method for Measurement of Fracture Toughness
ASTM C1421-01a Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperatures
ASTM E1290-99 Standard Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement
ASTM C1421-01b(2007) Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
ASTM C1421-09 Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
ASTM C1421-10 Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
ASTM D7779-20 Standard Test Method for Determination of Fracture Toughness of Graphite at Ambient Temperature
ASTM E1290-08 Standard Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement
ASTM E190-92(2008) Standard Test Method for Guided Bend Test for Ductility of Welds
ASTM D4145-10 Standard Test Method for Coating Flexibility of Prepainted Sheet
ASTM D7779-11 Standard Test Method for Determination of Fracture Toughness of Graphite at Ambient Temperature
ASTM E399-12 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness K Ic of Metallic Materials
ASTM E399-12e1 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness KIc of Metallic Materials
ASTM C765-97(2001)e1 Standard Test Method for Low-Temperature Flexibility of Preformed Tape Sealants
ASTM C765-97(2011) Standard Test Method for Low-Temperature Flexibility of Preformed Tape Sealants
ASTM D4145-10(2022) Standard Test Method for Coating Flexibility of Prepainted Sheet
ASTM C765-97(2015) Standard Test Method for Low-Temperature Flexibility of Preformed Tape Sealants
ASTM E1290-02e1 Standard Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement
ASTM E1290-02 Standard Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement
ASTM C1421-99 Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperatures
ASTM E1290-07e1 Standard Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement
ASTM E190-14 Standard Test Method for Guided Bend Test for Ductility of Welds
ASTM B771-87(2001) Standard Test Method for Short Rod Fracture Toughness of Cemented Carbides
ASTM B771-11(2021) Standard Test Method for Short Rod Fracture Toughness of Cemented Carbides
ASTM F147-87(2017) Standard Test Method for Flexibility of Non-Metallic Gasket Materials
ASTM E1221-12a(2018) Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels
ASTM D2861-87(1998) Standard Test Methods for Flexible Composites of Copper Foil with Dielectric Film or Treated Fabrics
ASTM E1221-12A(2018)e1 Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels
ASTM C1421-15 Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
ASTM F137-08(2018) Standard Test Method for Flexibility of Resilient Flooring Materials with Cylindrical Mandrel Apparatus
ASTM E1221-96 Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, K_Ia, of Ferritic Steels
ASTM E1221-96(2002) Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, K_Ia, of Ferritic Steels
ASTM C1421-01b Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
ASTM E399-90(1997) Standard Test Method for Plane-Strain Fracture Toughness of Metallic Materials
ASTM E399-08 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness K Ic of Metallic Materials
ASTM E399-09 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness K Ic of Metallic Materials
ASTM E399-06e2 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness K Ic of Metallic Materials
ASTM D2453-99 Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds
ASTM E399-20a Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials
ASTM E399-22 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials
ASTM E399-23 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials
ASTM D2453-15(2020)e1 Test method for shrinkage and toughness of oil-based and resin-based caulking compounds
ASTM E1221-12 Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels
ASTM E1922-04(2015) Standard Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials
ASTM E1221-12a Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels
ASTM D5683-95(1999)e1 Standard Test Method for Flexibility of Roofing and Waterproofing Materials and Membranes
ASTM D5683/D5683M-95(2022) Standard Test Method for Flexibility of Roofing and Waterproofing Materials and Membranes
ASTM D6182-23 Standard Test Method for Flexibility and Adhesion of Finish on Leather
ASTM C765-23 Standard Test Method for Low-Temperature Flexibility of Preformed Tape Sealants
ASTM E399-06e1 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness K_Ic of Metallic Materials
ASTM D2524-22 Standard Test Method for Breaking Tenacity of Wool Fibers, Flat Bundle Method— 18 in. (3.2 mm) Gage Length
ASTM D6109-03 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber
ASTM D6182-00(2010) Standard Test Method for Flexibility and Adhesion of Finish on Leather
ASTM F137-08 Standard Test Method for Flexibility of Resilient Flooring Materials with Cylindrical Mandrel Apparatus
ASTM D2453-03(2009) Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds
ASTM C734-15(2019) Standard Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering
ASTM C711-22 Standard Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants
ASTM E399-09e1 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness K Ic of Metallic Materials
ASTM E399-09e2 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness_Ic of Metallic Materials
ASTM F137-08(2013) Standard Test Method for Flexibility of Resilient Flooring Materials with Cylindrical Mandrel Apparatus
ASTM C711-03 Standard Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants
ASTM E1922-97 Standard Test Method for Translaminar Fracture Toughness of Laminated Polymer Matrix Composite Materials
ASTM E399-05 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness K_IC of Metallic Materials
ASTM E399-12e2 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness KIc of Metallic Materials
ASTM E399-12e3 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness KIc of Metallic Materials
ASTM E399-06 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness K_Ic of Metallic Materials
ASTM E399-17 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness KIc of Metallic Materials
ASTM E399-20 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness K_IC of Metallic Materials
ASTM E399-19 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness K_IC of Metallic Materials
ASTM E1221-06 Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, K_Ia, of Ferritic Steels
ASTM E1290-08e1 Standard Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement
ASTM F2136-01e1 Standard Test Method for Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe
ASTM F2136-08 Standard Test Method for Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe
ASTM F2136-18 Standard Test Method for Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe
ASTM E1304-97(2008) Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials
ASTM E1304-97 Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials
ASTM E1304-97(2014)e1 Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials
ASTM E1304-97(2020) Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials
ASTM E1290-07 Standard Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement
ASTM D7779-11(2015) Standard Test Method for Determination of Fracture Toughness of Graphite at Ambient Temperature
ASTM E2899-19 Standard Test Method for Measurement of Initiation Toughness in Surface Cracks Under Tension and Bending
ASTM E2899-19e1 Standard Test Method for Measurement of Initiation Toughness in Surface Cracks Under Tension and Bending
ASTM E289-04(2016) Standard Test Method for Linear Thermal Expansion of Rigid Solids with Interferometry
ASTM D5528-13 Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM D2453-03 Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds
ASTM D2453-15 Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds
ASTM C734-06 Standard Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering
ASTM C734-93 Standard Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering
ASTM C734-01 Standard Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering
ASTM D2861-87(2009) Standard Test Methods for Flexible Composites of Copper Foil with Dielectric Film or Treated Fabrics
ASTM C734-06(2012) Standard Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering
ASTM C734-15 Standard Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering
ASTM D7905/D7905M-19 Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM D7905/D7905M-19e1 Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites

IPC - Association Connecting Electronics Industries, Methods for Testing Toughness

IPC TM-650 5.5.2.1-1998 Test Method 2.6.18 - Low Temperature Flexibility

Japanese Industrial Standards Committee (JISC), Methods for Testing Toughness

JIS R 1668:2005 Testing method for fracture toughness of porous fine ceramics
JIS R 1617:2010 Testing method for fracture toughness of fine ceramics at elevated temperature
JIS Z 2284:1998 Method of elastic-plastic fracture toughness Jic testing for metallic materials in liquid helium
JIS K 7086:1993 Testing methods for interlaminar fracture toughness of carbon fibre reinforced plastics
JIS Z 2314:1991 Test methods for performance characteristics of eddy current testing instruments
JIS R 3252:1994 Measuring method for the homogeneity of glasses by laser interferometry
JIS K 7205:1995 Testing method for abrasion resistance of plastics by abrasive
JIS Z 8462-2:2003 Capability of detection -- Part 2: Methodology in the linear calibration case
JIS L 1091:1999 Testing methods for flammability of textiles

Korean Agency for Technology and Standards (KATS), Methods for Testing Toughness

KS F 2488-2016(2021) Standard test method for toughness and tenacity of modified asphalt binder
KS K 0539-2006 Determination of flexural stiffness of fabrics：Flexometer method
KS F 2488-2016 Standard test method for toughness and tenacity of modified asphalt binder
KS L 1600-2010(2020) Testing methods for fracture toughness of high performance ceramics
KS L 1608-1994 Testing method for fracture toughness of fine ceramics at elevated temperature
KS L 1608-2014 Testing method for fracture toughness of fines ceramics at elevated temperature
KS F 2488-2006 Standard test method for toughness and tenacity of modified asphalt binder
KS M ISO 13586-2012(2022) Plastics－Determination of fracture toughness(GIC and KIC)－Linear elastic fracture mechanics(LEFM) approach
KS M ISO 13586-2012(2017) Plastics－Determination of fracture toughness(GIC and KIC)－Linear elastic fracture mechanics(LEFM) approach
KS D ISO 12135:2005 Metallic materials-Unified method of test for the determination of quasistatic fracture toughness
KS D ISO 12135-2005(2010) Metallic materials－Unified method of test for the determination of quasistatic fracture toughness
KS D ISO 12135:2013 Metallic materials－Unified method of test for the determination of quasistatic fracture toughness
KS M ISO 5629:2007 Paper and board-Determination of bending stiffness-Resonance method
KS M ISO 5629:2017 Paper and board－Determination of bending stiffness－Resonance method
KS M ISO TS 17958:2020 Paper and board — Determination of fracture toughness —Constant rate of elongation method(1.7 mm/s)
KS M ISO 5979-2009(2019) Rubber or plastics coated fabrics－Determination of flexibility－Flat loop method
KS F 2292-2008 Test method of air tightness for windows and doors
KS F 2292-2013 The method of air tightness for windows and doors
KS F 2293-2008 Test method of water tightness for windows and doors
KS B 6721-1994 Testing methods of activated sludge process equipments
KS M ISO 17958:2014 Paper and board — Determination of fracture toughness — Constant rate of elongation method(1.7 mm/s)
KS B 0888-2014 Method of nondestructive examination for weld of pipeline
KS B 0888-1999 Method of nondestructive examination for weld of pipeline
KS M ISO 13586:2012 Plastics－Determination of fracture toughness(GIC and KIC)－Linear elastic fracture mechanics(LEFM) approach
KS C 6592-2007 Performance requirements for toxic gas-Detection instruments：Hydrogen sulfide
KS H 2147-1994 Testing methods for doenjang
KS B 8201-2004 Test method of thermal performance for solar storage tanks
KS B 8200-2006 Test method of thermal performance for solar collectors
KS B 8201-1999 Test method of thermal performance for solar storage tanks
KS H 1208-2021 Detection methods for antimicrobial resistance and virulence genes in lactic acid-producing bacteria
KS J ISO 10272-1:2020 Microbiology of the food chain — Horizontal method for detection and enumeration of Campylobacter spp. — Part 1: Detection method1：Detection method
KS C 6596-2007 Performance requirements for carbon monoxide detection instrument(50∼1 000 ppm full scale)
KS C 2007-2004 Testing methods for thermosetting plastic insulating materials
KS C 2007-2014 Testing methods for resistance of thermosetting plastic insulating materials

PL-PKN, Methods for Testing Toughness

PN C04255-1988 Rubber vulcanized Determination of resilience with Schob's method
PN H04335-1987 Metals Test method for piane — strain fracture toughness
PN H04336-1988 Metals Test method of fracture toughness by measurement critic value J integral, Jlc
PN BN 7303-04-1966

Association Francaise de Normalisation, Methods for Testing Toughness

NF G07-080:1972 Method for determination of breaking tenacity of flat bundles of cotton fibers.
NF EN 3102:2014 Série aérospatiale - Produits d'étanchéité - Methodes d'essai - Détermination de la flexibilité à basse température
NF A89-217*NF EN ISO 15653:2018 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds
NF EN ISO 15653:2018 Matériaux métalliques - Méthode d'essai pour la détermination de la ténacité quasi statique à la rupture des soudures
NF A89-217:2010 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds.
NF L17-099*NF EN 3102:2014 Aerospace series - Sealants - Test methods - Determination of low-temperature flexibility
NF EN ISO 15732:2005 Céramiques techniques - Méthode d'essai de ténacité à la rupture des céramiques monolithiques à température ambiante sur éprouvette préfissurée sur une seule face (méthode SEPB)
NF EN ISO 23146:2016 Céramiques techniques - Méthodes d'essai pour la détermination de la ténacité à la rupture des céramiques monolithiques - Méthode sur éprouvette à entaille en V sur une seule face (Méthode SEVNB)
NF B41-220-3*NF EN 14425-3:2010 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 3 : chevron notched beam (CNB) method.
NF L17-924*NF EN 4504:2017 Aerospace series - Non-metallic materials, Textiles - Test method - Determination of flexibility of narrow fabrics
NF EN 4504:2017 Série aérospatiale - Matériaux non-métalliques, textiles - Méthode d'essai - Détermination de la flexibilité des tissus étroits
NF EN ISO 24370:2023 Céramiques techniques - Méthode d'essai de ténacité à la rupture des céramiques monolithiques à température ambiante sur éprouvette entaillée en chevron
NF L17-025*NF EN 6033:2016 Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode I GIC
NF EN ISO 16828:2014 Essais non destructifs - Contrôle par ultrasons - Technique de diffraction du temps de vol utilisée comme méthode de détection et de dimensionnement des discontinuités
NF X06-048-2*NF ISO 11843-2:2000 Capability of detection - Part 2 : methodology in the linear calibration case
NF L17-026*NF EN 6034:2016 Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode II - GIIC
NF EN 6034:2016 Série aérospatiale - Matières plastiques renforcées de fibres de carbone - Méthode d'essai - Détermination de l'énergie de ténacité en rupture interlaminaire - Mode II - GIIC
NF EN 6033:2016 Série aérospatiale - Matières plastiques renforcées de fibres de carbone - Méthode d'essai - Détermination de l'énergie de ténacité en rupture interlaminaire - Mode I - GIC

Indonesia Standards, Methods for Testing Toughness

SNI 08-1111-1989 Test method for fineneas of flax fibre
SNI 0276-2009
SNI 03-6771-2002 Test methods for ignitability of building materials
SNI 03-6829-2002 Test method of emulsion asphalt residue content by evaporation

American National Standards Institute （ANSI), Methods for Testing Toughness

ANSI/ASTM F2031:2005 TEST METHOD FOR MEASUREMENT OF ARROW SHAFT STATIC SPINE STIFFNESS
ANSI/ASTM D7779:2011 Test Method for Determination of Fracture Toughness of Graphite at Ambient Temperature
ANSI/ASTM D2861:1998 Test Methods for Flexible Composites of Copper Foil with Dielectric Film or Treated Fabrics

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Methods for Testing Toughness

GB/T 4742-1984 Standard test method for lashing toughness of domestic ceramic
GB/T 23538-2009 Conventional abrasive.Testing method for toughness(Ball mill method)
GB 4742-1984 Determination method of impact toughness of ceramics for daily use
GB/T 33144-2016(英文版) Superabrasive—Test method of impact toughness index
GB/T 41932-2022 Plastics—Determination of fracture toughness (GIC and KIC)—Linear elastic fracture mechanics (LEFM) approach
GB/T 41907-2022 Assay method of enterokinase activity
GB/T 30990-2014 Determination of the activity of lysozyme
GB/T 19495.4-2004 Detection of genetically modified organisms and derived products. Qualitative PCR methods based on nucleic acid
GB/T 26347-2010 Test methods of mosquito resistance to insecticides.Bioassay methods
GB/T 31967.2-2015 Test method for physical property of rare earth permanent magnetic materials.Part 2:Determination of bending strength and fracture toughness
GB/T 31859-2015 Test method for easy-cleaning property of ceramic
GB/T 21101-2007 Identification of porcine derived materials in animal-originated feedstuffs- PCR method
GB/T 21105-2007 Identification of Canis derived materials in animal-originated feedstuffs-PCR method
GB/T 21106-2007 Identification of Cervus derived materials in animaloriginated feedstuffs-PCR method
GB/T 26350-2010 Test methods of fly resistance to insecticides.The bioassay methods for musca domestica
GB/T 21107-2007 Idemtification of horse and donkey derived materials in animal-originated feedstuffs.PCR method
GB/T 21100-2007 Identification of Camelidae derived materials in animal-originated feedstuffs.PCR method
GB/T 9158-2015 Test methods of mechanics performance for windows and doors in building
GB/T 17661-1999 Detection method of drying equipments performance of sawn timber
GB/T 11153-1989 Parameters testing method of laser power meter in low range
GB/T 11153-2012 Test methods of laser power meter in loveer-range
GB/T 21837-2008 Practice for electromagnetic examination of ferromagnetic steel wire rope
GB/T 28896-2023 Test method for quasi-static fracture toughness of welded joints of metallic materials
GB/T 28896-2012 Metallic materials.Method of test for the determination of quasistatic fracture toughness of welds
GB/T 28764-2012 Test method for sealing characteristics of packaging containers.Ultrasonic method
GB/T 26489-2011 Methods for measuring super amphiphilicity of nanomaterials
GB/T 26490-2011 Methods for measuring super hydrophobicity of nanomaterials
GB/T 27634-2011 Protocol of nucleic acid detection for infectious bursal disease (gumboro disease) virus
GB/T 41906-2022 Assay method of superoxide dismutase activity
GB/T 22632-2008 Door leaves.Determination of the resistance to hard body impact
GB/T 22635-2008 Door leaves.Determination of the behaviour under humidity variations in successive uniform climates
GB/T 25757-2010 Non-destructive testing.Test methods of performance characteristics of automatic magnetic flux leakage testing systems for steel tubes

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Methods for Testing Toughness

GB/T 33144-2016 Superabrasive—Test method of impact toughness index
GB/T 34799-2017 Determination of the activity of chitinase
GB/T 33207-2016 Non-destructive testing—Test method for the accumulation of oxide scale in the metal tube in service by magnetic testing
GB/T 22638.3-2016 Test methods for aluminium and aluminium alloy foils—Part 3：Determination of stickiness
GB/T 22638.9-2016 Test methods for aluminium and aluminium alloy foils—Part 9: Determination of hydrophilic property
GB/T 22638.5-2016 Test methods for aluminium and aluminium alloy foils—Part 5：Determination of wettability
GB/T 33210-2016 Non-destructive testing—Test method for determining residual stresses by electromagnetic technology
GB/T 34795-2017 Determination of the activity of transglutaminase
GB/T 34824-2017 The test method of wind load resistance performance for screens of windows and doors

国家市场监督管理总局、中国国家标准化管理委员会, Methods for Testing Toughness

GB/T 38338-2019 Test method for fracture toughness of carbon materials
GB/T 40268-2021 Determination of performance on immunomagnetic material
GB/T 37365-2019 Die casting unit—Performance testing method
GB/T 1927.17-2021 Test methods for physical and mechanical properties of small clear wood specimens—Part 17: Determination of impact bending strength
GB/T 36986-2018 Dynamic testing methods of brake performance for automobiles
GB/T 38882-2020 Non-destructive testing—Testing method for wall-thickness loss of ferromagnetic tubes using magnetic flux leakage
GB/T 37765-2019 Qualitative determination methods of asbestos in electrical and electronic products
GB/T 41310-2022 Image-based test method for vision module photoelectric performance
GB/T 40332-2021 Non-destructive testing—Ultrasonic testing—Characterization and verification of ultrasonic thickness measuring equipment
GB/T 39849-2021 Non-destructive testing instruments—Ultrasonic time-of-flight diffraction instrument—Methods of performance tests
GB/T 39585-2020 Opto-electronic measurement—Performance requirements and test methods of light distribution measurement system
GB/T 18852-2020 Non-destructive testing—Ultrasonic testing—Reference blocks and test procedures for the characterization of contact probe sound beams
GB/T 38897-2020 Non-destructive testing—Measurement method for material elastic modulus and Poisson's ratio using ultrasoinc velocity
GB/T 40307-2021 Non-destructive testing—Test method for texture by neutron diffraction
GB/T 8484-2020 Test method for thermal insulating performance for building exterior doors and windows

German Institute for Standardization, Methods for Testing Toughness

DIN EN ISO 703:2017-06 Conveyor belts - Transverse flexibility (troughability) - Test method (ISO 703:2017); German version EN ISO 703:2017
DIN EN ISO 15653:2018-06 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds (ISO 15653:2018); German version EN ISO 15653:2018
DIN EN ISO 15653:2018 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds (ISO 15653:2018)
DIN CEN/TS 14425-1:2003 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 1: Guide to test method selection; German version CEN/TS 14425-1:2003
DIN CEN/TS 14425-1:2003-11 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 1: Guide to test method selection; German version CEN/TS 14425-1:2003
DIN ISO 11843-2:2006 Capability of detection - Part 2: Methodology in the linear calibration case (ISO 11843-2:2000; text in German, English)
DIN CEN/TS 14425-5:2004 Advanced technical ceramics - Test methods for determination of fracture toughness of monolitic ceramics - Part 5: Single-edge vee-notch beam (SEVNB) method; German version CEN/TS 14425-5:2004
DIN EN 61830:1998 Microwave ferrite components - Measuring methods for major properties (IEC 61830:1997); German version EN 61830:1998
DIN EN 6033:2016 Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode I - GIC; German and English version EN 6033:2015
DIN EN 3102:2013 Aerospace series - Sealants - Test methods - Determination of low-temperature flexibility; German and English version EN 3102:2013
DIN EN 3102:2013-05 Aerospace series - Sealants - Test methods - Determination of low-temperature flexibility; German and English version EN 3102:2013
DIN EN 6033:2016-02 Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode I - GIC; German and English version EN 6033:2015

British Standards Institution (BSI), Methods for Testing Toughness

BS 6729:1987 Method for determination of the dynamic fracture toughness of metallic materials
BS CWA 17793:2021 Test method for determination of the essential work of fracture of thin ductile metallic sheets
BS ISO 12135:2021 Metallic materials. Unified method of test for the determination of quasistatic fracture toughness
BS EN ISO 15653:2010 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds
BS EN 3102:2013 Aerospace series. Sealants. Test methods. Determination of low-temperature flexibility
BS ISO 23524:2022 Plastics. Determination of fracture toughness of films and thin sheets. Essential work of fracture (EWF) method
BS 903-A13:1990 Physical testing of rubber - Method for determination of stiffness at low temperature (Gehman test)
15/30293838 DC BS ISO 12135. Metallic materials. Unified method of test for the determination of quasistatic fracture toughness
20/30394397 DC BS ISO 12135. Metallic materials. Unified method of test for the determination of quasistatic fracture toughness
BS ISO 20064:2019 Metallic materials. Steel. Method of test for the determination of brittle crack arrest toughness, K_ca
BS DD CEN/TS 14425-1:2003 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Guide to test method selection
DD CEN/TS 14425-1:2003 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Guide to test method selection
BS 2782-3 Method 365A:1976 Methods of testing plastics - Mechanical properties - Determination of softness number of flexible plastics materials
BS EN ISO 15653:2018 Tracked Changes. Metallic materials. Method of test for the determination of quasistatic fracture toughness of welds
DD CEN/TS 14425-5:2004 Advanced technical ceramics. Test methods for determination of fracture toughness of monolithic ceramics. Single-edge vee-notch beam (SEVNB) method
BS DD CEN/TS 14425-3:2003 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 3:Chevron notched beam (CNB) method
BS DD CEN/TS 14425-3:2004 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Chevron notched beam (CNB) method
BS 7448-3:2005 Fracture mechanics toughness tests - Part 3.Method for determination of fracture toughness of metallic materials at rates of increase in stress intensity factor greater than 3.0 MPa m0.5 s-1
BS 7448-1:1991 Fracture mechanics toughness tests - Method for determination of KIc, critical CTOD and critical J values of metallic materials
BS ISO 20267:2017 Thermal spraying. Determination of interfacial toughness of ceramic coatings by indentation
PD ISO/TS 17958:2013 Paper and board. Determination of fracture toughness. Constant rate of elongation method (1,7 mm/s)
BS 8571:2014 Method of test for determination of fracture toughness in metallic materials using single edge notched tension (SENT) specimens
BS DD CEN/TS 14425-5:2004 Advanced technical ceramics-Test methods for determination of fracture toughness of monolithic ceramics-Part 5:Single-edge vee-notch beam (SEVNB) method
BS DD CEN/TS 14425-5:2005 Advanced technical ceramics. Test methods for determination of fracture toughness of monolithic ceramics. Single-edge vee-notch beam (SEVNB) method
BS 6049-7:1981 Methods of test for tea. Determination of alkalinity of water-soluble ash
BS ISO 11843-5:2008+A1:2017 Capability of detection - Methodology in the linear and non-linear calibration cases
BS EN 14425-3:2010 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Chevron notched beam (CNB) method
BS ISO 11843-2:2000 Capability of detection. Methodology in the linear calibration case
BS 8571:2018 Tracked Changes. Method of test for determination of fracture toughness in metallic materials using single edge notched tension (SENT) specimens
BS EN 583-6:2008 Non-destructive testing - Ultrasonic examination - Time-of-flight diffraction technique as a method for detection and sizing of discontinuities
BS ISO 11843-5:2009 Capability of detection. Methodology in the linear and non-linear calibration cases
BS ISO 11843-5:2008 Capability of detection - Methodology in the linear and non-linear calibration cases
BS 6049-5:1989 Methods of test for tea. Determination of water-soluble ash and water-insoluble ash

RU-GOST R, Methods for Testing Toughness

GOST 11067-2013 Glass and glass products. Method for determination of mechanical properties. Determination of impact toughness
GOST R 55657-2013 Modified wood. Methods of plugs strength, hardness and toughness determination
GOST 473.11-1981 Chemically resistant and heat resistant ceramic ware. The method for determination of resilience
GOST 11067-1985 Inorganic glass and glass-crystal materials. Method for the determination of impact strength
GOST R 55400-2013 Reinforced bitumen sheets for waterproofing of bridge decks. Method for determination of flexibility at low temperatures
GOST 25.506-1985 Design, calculation and strength testing. Methods of mechanical testing of metals. Determination of fracture toughness characteristics under the static loading
GOST R 56808-2015 Polymer composites. Method for determination interlaminar fracture toughness of unidirectional-reinforced composites
GOST R 53360-2009 Enzyme preparation. Methods of detection of phytase activity
GOST 33685-2015 Polymer composites. Test method for determination of the interlaminar fracture toughness under shear GIIC
GOST R 53973-2010 Enzyme preparations. Method of detection of Beta-glucanase activity
GOST 8.331-1999 State system for ensuring the uniformity of measurement. Distortion meters. Methods and means of verification and calibration
GOST R 53227-2008 Roofing, hydraulic-insulating, flexible, bitumen-based materials. Method for determination of deformation and strength properties
GOST R 55298-2012 Enzyme preparations for food industry. Methods for determination of pectolytic activity
GOST R 57206-2016 Polymer composites. Test method of determination of the mode II fracture toughness for the calibrated end-loaded split (C-ELS)
GOST R ISO 8422-2011 Statistical methods. Sequential sampling plans for inspection by attributes
GOST R 55033-2012 Public roads and highways. Geosynthetic for road construction. Test method for determination of flexibility at low temperature
GOST 21342.3-1987 Variable resistors. Test methods for resistance law
GOST R 55302-2012 Enzyme preparations. Method of detection of xylanase activity
GOST R 55293-2012 Enzyme preparations for food industry. Method for determination of cellulase activity

International Organization for Standardization (ISO), Methods for Testing Toughness

ISO 15653:2018 Metallic materials — Method of test for the determination of quasistatic fracture toughness of welds
ISO 12135:2002 Metallic materials - Unified method of test for the determination of quasistatic fracture toughness
ISO 12135:2016 Metallic materials - Unified method of test for the determination of quasistatic fracture toughness
ISO 12135:2021 Metallic materials - Unified method of test for the determination of quasistatic fracture toughness
ISO 5629:1983 Paper and board; Determination of bending stiffness; Resonance method
ISO 5629:2017 Paper and board - Determination of bending stiffness - Resonance method
ISO 15653:2010 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds
ISO/TS 17958:2013 Paper and board - Determination of fracture toughness - Constant rate of elongation method (1,7 mm/s)
ISO 20267:2017 Thermal spraying - Determination of interfacial toughness of ceramic coatings by indentation
ISO 12135:2002/Cor 1:2008 Metallic materials — Unified method of test for the determination of quasistatic fracture toughness TECHNICAL CORRIGENDUM 1
ISO 23524:2022 Plastics — Determination of fracture toughness of films and thin sheets — Essential work of fracture (EWF) method
ISO 22290:2020 Non-destructive testing - Infrared thermographic testing - General principles for thermoelastic stress measuring method
ISO 13586:2018 Plastics - Determination of fracture toughness (GIC and KIC) - Linear elastic fracture mechanics (LEFM) approach

IN-BIS, Methods for Testing Toughness

IS 13826 Pt.2-1993 Bitumen based felt. Methods of test. Part 2: Pliability test
IS 3675-1966

WRC - Welding Research Council, Methods for Testing Toughness

BULLETIN 458-2001 FRACTURE TOUGHNESS MASTER CURVE DEVELOPMENT: APPLICATION OF MASTERCURVE FRACTURE TOUGHNESS METHODOLOGY FOR FERRITIC STEELS

Lithuanian Standards Office , Methods for Testing Toughness

LST EN ISO 703:2007 Conveyor belts - Transverse flexibility (troughability) - Test method (ISO 703:2007)
LST EN ISO 15653:2010 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds (ISO 15653:2010)
LST EN 1109-2013 Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of flexibility at low temperature
LST EN 14425-3-2010 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 3: Chevron notched beam (CNB) method
LST EN 12256-2002 Plastics piping systems - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Methods for Testing Toughness

PREN 3102-1996 Aerospace Series Sealants Test Methods Determination of Low-Temperature Flexibility
PREN 4504-1999 Aerospace Series Textiles Test Method Determination of Flexibility of Narrow Fabrics
PREN 3878-1993 Aerospace Series Test Method for Braze Alloys Flexibility Test
PREN 4504-2001 Aerospace Series Non-Metallic Materials Textiles Test Method Determination of Flexibility of Narrow Fabrics (Edition P 1)

YU-JUS, Methods for Testing Toughness

JUS G.S2.637-1985 Plastics. Testing of industrial laminates. Wedging test for industrial laminated sheets
JUS C.A4.084-1995 Mechanical testing of metals - Methods of tests for plane strain fracture toughness (K IC)
JUS Z.M3.036-1989 Packing. Sacks made from thermoplastic flexible film. Description and method of measurement
JUS H.D8.115-1987 Electric detonators. Methods of testing. Test ofsensitiveness to drop
JUS C.K5.025-1979 Magnetic sheets. Methods of testing. Preparation of specimens for the checking ofquality and testing of magnetic properties.
JUS G.E2.236-1983 Conveyor belts. Heat resistance. Method of test
JUS C.X5.032-1990 MagnetIc materials. Hethods of test. Insulation resistance measurement
JUS G.E2.226-1991 Electrical conductivity of conveyor belts.Specification and method of test

CEN - European Committee for Standardization, Methods for Testing Toughness

EN ISO 15653:2018 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds
PD CEN/TS 14425-5:2004 Advanced technical ceramics - Test methods for determination of fracture toughness of monolitic ceramics - Part 5: Single-edge vee-notch beam (SEVNB) method

European Committee for Standardization (CEN), Methods for Testing Toughness

EN 3102:2013 Aerospace series - Sealants - Test methods - Determination of low-temperature flexibility
EN ISO 15653:2010 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds (ISO 15653:2010)
PD CEN/TS 14425-1:2003 Advanced technical ceramics Test methods for determination of fracture toughness of monolithic ceramics Part 1:Guide to test method selection
PD CEN/TR 14748:2004 Non-destructive testing - Methodology for qualification of nondestructive tests
EN 14425-3:2010 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 3: Chevron notched beam (CNB) method
PD CEN/TS 14425-3:2003 Advanced technical ceramics Test methods for determination of fracture toughness of monolithic ceramics Part 3: Chevron notched beam (CNB) method
EN 843-7:2010 Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 7: C-ring tests
EN ISO 23146:2016 Fine ceramics (advanced ceramics@ advanced technical ceramics) - Test methods for fracture toughness of monolithic ceramics - Single-edge V-notch beam (SEVNB) method

Danish Standards Foundation, Methods for Testing Toughness

DS/EN ISO 15653:2010 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds
DS/CEN/TS 14425-1:2003 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 1: Guide to test method selection
DS/EN 4504:2013 Aerospace series - Non-metallic materials, Textiles - Test method - Determination of flexibility of narrow fabrics
DS/EN 14425-3:2010 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 3: Chevron notched beam (CNB) method
DS/EN 12256:1998 Plastics piping systems - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings
DS/CEN/TS 14425-5:2004 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 5: Single-edge vee-notch beam (SEVNB) method

ES-UNE, Methods for Testing Toughness

UNE-EN ISO 15653:2018 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds (ISO 15653:2018)
UNE-EN 3102:2013 Aerospace series - Sealants - Test methods - Determination of low-temperature flexibility (Endorsed by AENOR in April of 2013.)
UNE-EN 4504:2013 Aerospace series - Non-metallic materials, Textiles - Test method - Determination of flexibility of narrow fabrics
UNE-EN 6033:2015 Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode I - GIC (Endorsed by AENOR in January of 2016.)
UNE-EN 6034:2015 Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode II - GIIC (Endorsed by AENOR in January of 2016.)

American Welding Society (AWS), Methods for Testing Toughness

WRC 458:2001 Fracture Toughness Master Curve Development: Application Of Master Curve Fracture Toughness Methodology For Ferritic Steels

AR-IRAM, Methods for Testing Toughness

IRAM 1547-1948

HU-MSZT, Methods for Testing Toughness

KR-KS, Methods for Testing Toughness

KS M ISO TS 17958-2020 Paper and board — Determination of fracture toughness —Constant rate of elongation method(1.7 mm/s)
KS M ISO 13757-2003(2023)
KS J ISO 10272-1-2020 Microbiology of the food chain — Horizontal method for detection and enumeration of Campylobacter spp. — Part 1: Detection method1：Detection method

AENOR, Methods for Testing Toughness

UNE-EN ISO 15653:2011 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds (ISO 15653:2010)
UNE-EN 12256:1999 PLASTICS PIPING SYSTEMS - THERMOPLASTICS FITTINGS - TEST METHOD FOR MECHANICAL STRENGTH OR FLEXIBILITY OF FABRICATED FITTINGS

CU-NC, Methods for Testing Toughness

NC 40-155-1988 Textile Industry. Determination of Tensile-Breaking Strength and Toughness of Threads in Hanks. Testing Method

未注明发布机构, Methods for Testing Toughness

BS 7448-3:2005(2007) Fracture mechanics toughness tests — Part 3 : Method for determination of fracture toughness of metallic materials at rates of increase in stress intensity factor greater than 3.0 MPa · m0.5 sp1
BS 7448-1:1991(2002) Fracture mechanics toughness tests — Part 1 : Method for determination of KIc, critical CTOD and critical J values of metallic materials

Group Standards of the People's Republic of China, Methods for Testing Toughness

T/GDCKCJH 051-2021 Performance requirements and test method for bar code verifier
T/GDSM 001-2019 Testing Methods of Optical Characteristics for Flexible Display
T/GDCKCJH 046-2021 Performance requirements and test method for helium mass spectrometer leak detector
T/ATNT 1-2023 Method for testing the performance of couplant for ultrasonic testing of metal materials
T/CAAP 016-2020 Drying test methods of water absorbing seat cushions
T/CATSI 02010-2022 Method for Helium leak?detection of gas cylinders
T/CASME 325-2023 Testing method for performance of moist heat sterilizer
T/CISA 192-2021 Method for testing the stability of weathering steel rust layer
T/GDCKCJH 078-2023 Performance requirements and test methods for heating plate
T/GDCKCJH 077-2023 Performance requirements and test methods for soldering furnaces
T/GDCKCJH 047-2021 Performance requirements and test method for mask flame retardant tester

BR-ABNT, Methods for Testing Toughness

PT-IPQ, Methods for Testing Toughness

NP EN 12256-2000 Plastics piping systems Thermoplastics fittings Test method for mechanical strength or flexibility of fabricated fittings

CZ-CSN, Methods for Testing Toughness

CSN 42 0347-1974 Metallic materials. Method for plane strain fracture toughness (Kic) testing.
CSN EN 26591-2-1994 Packaging - Sakcks - Description and method of measurement. Part 2: Empty sacks made from thermoplastic flexible film

Professional Standard - Speciality, Methods for Testing Toughness

ZB Q14002.4-1988 Quality testing method of concrete components of farm buildings Mechanical performance testing method

RO-ASRO, Methods for Testing Toughness

STAS 9684-1982 CORROSION OF METALS Methods for testing and measuring resistance to corrosion

Professional Standard - Commodity Inspection, Methods for Testing Toughness

SN/T 2867-2011 Qualitative identification of fish derived material in feedstuff-PCR method
SN/T 2524.1-2010 Determination of Proteeae species in food for import and export-Part 1: Qualitative method
SN/T 3536-2013 Determination of Acid Orange II in foods for export
SN/T 3647-2013 Detection of shark derived material.PCR method
SN/T 3579-2013 Viability detection of Phytophthora sojae Kaufmann & Gerdemann
SN/T 3586-2013 Quarantine protocol for scrapie resistance gene genotyping
SN/T 2667-2010 Qualitative detection for genetically modified microorganisms
SN/T 1469-2004 Detecting method for dengue viruses in input mosquitoes
SN/T 1486-2004 Detecting methods for yellow fever virus in imported mosquitoes
SN/T 1195-2003 Protocol of the qualitative polymerase chain reaction (PCR) for detecting genetically modified component in soybeans
SN/T 2102.4-2008 Polymerase chain reaction(PCR)for the detection of food-borne pathogens.Part 4:Requirements for amplification and detection for qualitative methods
SN/T 1586.1-2005 Detection for Curtobacterium flaccumfaciens pv. flaccumfaciens (Hedges)Collins and Joues
SN/T 3065-2011 Methods for detection of Burkholderia glumae

VN-TCVN, Methods for Testing Toughness

TCVN 4396-1986 Non-destructive testing.Method of magnetic particle testing

IT-UNI, Methods for Testing Toughness

UNI 7957-1979 Mechanical tests of ferrous materials. Ductility control by means of through thickness tensile testing.
UNI 4842-1975
UNI 4842-1966

Standard Association of Australia （SAA）, Methods for Testing Toughness

AS 1301.440s:1991 Methods of test for pulp and paper - Bendtsen air permeance of paper and board

The American Road & Transportation Builders Association, Methods for Testing Toughness

AASHTO T 393-2021 Standard Method of Test for Determining the Fracture Potential of Asphalt Mixtures Using the Illinois Flexibility Index Test (I-FIT)

Association of Official Analytical Chemists (AOAC), Methods for Testing Toughness

AOAC Official Method 993.01 Detection method of phosphorus amine

Professional Standard - Agriculture, Methods for Testing Toughness

NY/T 1739-2009 Determination of pre-harvest sprouting in wheat
312药典四部-2020 4000 Testing methods for pharmaceutical packaging materials 4011 Testing methods for acute systemic toxicity of pharmaceutical packaging materials
306药典四部-2020 4000 Testing methods for pharmaceutical packaging materials 4005 Determination of tensile properties
315药典四部-2020 4000 Testing method for pharmaceutical packaging materials 4014 Cytotoxicity testing method for pharmaceutical packaging materials
JAP-142 Other methods for the detection method of ceftiofur

Professional Standard-Safe Production, Methods for Testing Toughness

AQ 5215-2013 Safety performance testing method for spray booth
AQ/T 5215-2013 Testing method for safety performance of spray booth
AQ 5214-2013 Safety performance test method of drying oven
AQ/T 5214-2013 Testing method for safety performance of drying equipment

国家质量监督检验检疫总局, Methods for Testing Toughness

SN/T 4452-2016 Qualitative detection method for exported tiger, leopard and lion derived components PCR-RFLP method
SN/T 1486-2016 Detection method for yellow fever virus carried by imported mosquitoes

ZA-SANS, Methods for Testing Toughness

SANS 11843-2:2009 Capability of detection Part 2: Methodology in the linear calibration case

Sichuan Provincial Standard of the People's Republic of China, Methods for Testing Toughness

DB51/T 2270-2016 PCR specific detection method for rice smut fungus
DB51/T 2301-2016 PCR detection method of Mannella hemolytica

Association of German Mechanical Engineers, Methods for Testing Toughness

VDI 4009 Blatt 10-1986 Analytical methods for fault detection in reliability assurance

SE-SIS, Methods for Testing Toughness

SIS SS 01 42 30-1982 Precision of test methods - Determina-tion of repeatability and reproducibility by inter-laboratory tests

Jinlin Provincial Food Standard of the People's Republic of China, Methods for Testing Toughness

DBS22/ 018-2013 PCR method for qualitative detection of duck-derived components in fresh (frozen) meat

工业和信息化部/国家能源局, Methods for Testing Toughness

JB/T 13159-2017 Far-field eddy current testing method for non-destructive testing of in-service ferromagnetic heat exchanger tubes

Shandong Provincial Standard of the People's Republic of China, Methods for Testing Toughness

DB37/T 4298-2020 Rapid Detection Method of Green Tide Secondary Toxicity Luminescence Bacteria Method
DB37/T 3532-2019 Real-time fluorescent PCR method for qualitative detection of goat and bovine ingredients in goat milk

Professional Standard - Construction Industry, Methods for Testing Toughness

JG/T 440-2014 Test method for shading performance of windows and doors

Liaoning Provincial Standard of the People's Republic of China, Methods for Testing Toughness

DB21/T 2592.1-2016 Detection methods of chicken infectious diseases part 1: real-time fluorescent RT-PCR detection method of chicken infectious bursal virus

ES-AENOR, Methods for Testing Toughness

UNE 104-281 Pt.6.4-1985

AASHTO - American Association of State Highway and Transportation Officials, Methods for Testing Toughness

TP28-1994 Standard Test Method for the Detection of Voids under Rigid Pavement
TP 28-1994 Standard Method of Test for Detection of Voids Under Rigid Pavement

PK-PSQCA, Methods for Testing Toughness

PS 595-1983 PAKISTAN STANDARD METHOD FOR DETERMINA-TION OF BREAKING LOAD, ELONGATION AT BREAK AND TENACITY OF JUTE YARNS. (1st Revision)

Inner Mongolia Provincial Standard of the People's Republic of China, Methods for Testing Toughness

DB15/T 2027-2020 Real-time fluorescent PCR method for detection of horse-derived components

农业农村部, Methods for Testing Toughness

NY/T 3784-2020 Pesticide thermal safety testing method adiabatic calorimetry

Professional Standard - Energy, Methods for Testing Toughness

NB/T 20292-2014 Test method for determination of reference temperature, T<下标0>, for ferritic steels in the ductile-to-brittle transition range for nuclear power plants

Professional Standard - Electricity, Methods for Testing Toughness

DL/T 385-2010 Determination of electrostatic charging tendency of transformer oil

Professional Standard - Aquaculture, Methods for Testing Toughness

SC/T 7211-2011 Detection method of infectious spleen and kidney necrosis virus

GOSTR, Methods for Testing Toughness

GOST 34176-2017 Enzyme preparation. Methods of endo-в-glucanase ferment activity detection

Tianjin Provincial Standard of the People's Republic of China, Methods for Testing Toughness

DB12/T 603-2015 Test method for flammability of infant clothing