ZH
RU
ES
Standard Density Granules
Standard Density Granules, Total:500 items.
In the international standard classification, Standard Density Granules involves: Refractories, Raw materials for rubber and plastics, Pesticides and other agrochemicals, Cutting tools, Fuels, Construction materials, Analytical chemistry, Soil quality. Pedology, Particle size analysis. Sieving, Civil engineering in general, Conducting materials, Measurement of volume, mass, density, viscosity, Power stations in general, Cork and cork products, Road vehicles in general, Earthworks. Excavations. Foundation construction. Underground works, Ceramics, Rubber and plastics products, Domestic, commercial and industrial heating appliances, Sports equipment and facilities, Metalliferous minerals, Nuclear energy engineering, Road engineering, Adhesives, Clothes, Powder metallurgy, Environmental protection, Geology. Meteorology. Hydrology, Packaging and distribution of goods in general, Paint ingredients, Inorganic chemicals, Lubricants, industrial oils and related products, Rubber, Mechanical testing, Products of the chemical industry, Protection of and in buildings, Vocabularies, Plastics, Terminology (principles and coordination), Agricultural machines, implements and equipment, Pipeline components and pipelines, Structures of buildings, Optics and optical measurements, Elements of buildings, Air quality, Ventilators. Fans. Air-conditioners, Physics. Chemistry, Test conditions and procedures in general, Measurement of fluid flow, Medical equipment, Petroleum products in general, Paints and varnishes, Aerospace fluid systems and components, Inks. Printing inks, Wood-based panels.
British Standards Institution (BSI), Standard Density Granules
- BS ISO 8840:2021 Refractory materials. Determination of bulk density of granular materials (grain density)
- BS ISO 9136-1:2004 Abrasive grains. Determination of bulk density - Macrogrits
- 21/30395144 DC BS ISO 8840. Refractory materials. Determination of bulk density of granular materials (grain density)
- BS ISO 9136-1:2005 Abrasive grains - Determination of bulk density - Macrogrits
- BS ISO 18747-1:2018 Determination of particle density by sedimentation methods - Isopycnic interpolation approach
- BS ISO 18747-2:2019 Determination of particle density by sedimentation methods - Multi-velocity approach
- BS 7755-5.3:1998 Soil quality - Physical methods - Determination of particle density
- BS ISO 14411-2:2020 Preparation of particulate reference materials - Polydisperse spherical particles
- BS DD CEN/TS 15150:2005 Solid biofuels — Methods for the determination of particle density
- BS DD CEN/TS 15150:2006 Solid biofuels. Methods for the determination of particle density
- BS EN ISO 11508:2017 Tracked Changes. Soil quality. Determination of particle density
- BS DD CEN/TS 15405:2010 Solid recovered fuels. Determination of density of pellets and briquettes
- BS ISO 20290-1:2021 Aggregates for concrete. Test methods for mechanical and physical properties - Determination of bulk density, particle density, particle mass-per-volume and water absorption
- 19/30380724 DC Preparation of particulate reference materials — Part 2: Polydisperse spherical particles. Part 2. Polydisperse spherical particles
- BS DD CEN/TS 15405:2006 Solid recovered fuels. Methods for the determination of density of pellets and briquettes
- DD CEN/TS 15405:2006 Solid recovered fuels — Methods for the determination of density of pellets and briquettes
- BS ISO 27891:2015 Aerosol particle number concentration. Calibration of condensation particle counters
- 19/30373025 DC BS ISO 20290-1. Aggregates for concrete. Test methods for mechanical and physical properties. Part 1. Determination of bulk density, particle density, particle mass-per-volume and water absorption
- BS EN ISO 18847:2016 Solid biofuels. Determination of particle density of pellets and briquettes
- PD ISO/TS 14411-1:2017 Preparation of particulate reference materials. Polydisperse material based on picket fence of monodisperse spherical particles
- 23/30464630 DC BS EN ISO 18847. Solid biofuels. Determination of particle density of pellets and briquettes
- BS EN 993-18:2002 Methods of test for dense shaped refractory products - Determination of bulk density of granular materials by the water method with vacuum
- BS EN 1097-6:2000 Tests for mechanical and physical properties of aggregates - Determination of particle density and water absorption
- BS EN 1097-6:2013 Tests for mechanical and physical properties of aggregates. Determination of particle density and water absorption
- BS EN ISO 17892-3:2015 Geotechnical investigation and testing. Laboratory testing of soil. Determination of particle density
- BS EN 993-17:1999 Methods of test for dense shaped refractory products - Determination of bulk density of granular materials by the mercury method with vacuum
- BS EN 12341:2014 Ambient air. Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
American Society for Testing and Materials (ASTM), Standard Density Granules
- ASTM D1513-05(2023) Standard Test Method for Carbon Black, Pelleted—Pour Density
- ASTM E727/E727M-08(2013)e1 Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
- ASTM E727-91(1998) Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
- ASTM E727-02 Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
- ASTM E727/E727M-08(2020) Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
- ASTM D1513-05 Standard Test Method for Carbon Black, Pelleted8212;Pour Density
- ASTM D1513-99a(2004) Standard Test Method for Carbon Black, Pelleted8212;Pour Density
- ASTM D1513-04 Standard Test Method for Carbon Black, Pelleted8212;Pour Density
- ASTM D1513-05(2012) Standard Test Method for Carbon Black, Pelletedmdash;Pour Density
- ASTM E873-82(2006) Standard Test Method for Bulk Density of Densified Particulate Biomass Fuels
- ASTM E873-82(2013) Standard Test Method for Bulk Density of Densified Particulate Biomass Fuels
- ASTM E873-82(2019) Standard Test Method for Bulk Density of Densified Particulate Biomass Fuels
- ASTM C520-15 Standard Test Methods for Density of Granular Loose Fill Insulations
- ASTM D4699-03 Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Particles
- ASTM D4699-03(2013) Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles
- ASTM C357-94(2002)e1 Standard Test Method for Bulk Density of Granular Refractory Materials
- ASTM C357-94(1998) Standard Test Method for Bulk Density of Granular Refractory Materials
- ASTM C357-07(2015) Standard Test Method for Bulk Density of Granular Refractory Materials
- ASTM D4699-99 Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Particles
- ASTM D4699-03(2008) Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles
- ASTM D4781-03 Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles
- ASTM D4781-03(2018)e1 Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles
- ASTM UOP294-93 Apparent Bulk Density of Catalyst Particles
- ASTM D2862-10 Standard Test Method for Particle Size Distribution of Granular Activated Carbon
- ASTM D2862-16 Standard Test Method for Particle Size Distribution of Granular Activated Carbon
- ASTM UOP294-14 Apparent Bulk Density of Catalyst Particles
- ASTM D4791-05 Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate
- ASTM D4791-05e1 Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate
- ASTM D4791-99 Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate
- ASTM D4791-10 Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate
- ASTM D4791-19 Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate
- ASTM D4791-19(2023) Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate
- ASTM E1520-23 Standard Test Method for Particle Counts Per Pound of Granular Carriers and Dry-Applied Granular Formulations
- ASTM D4512-99 Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder
- ASTM E725-96(2020) Standard Test Method for Sampling Granular Carriers and Granular Pesticides
- ASTM E725-96 Standard Test Method for Sampling Granular Carriers and Granular Pesticides
- ASTM E725-96(2001) Standard Test Method for Sampling Granular Carriers and Granular Pesticides
- ASTM E725-96(2021) Standard Test Method for Sampling Granular Carriers and Granular Pesticides
- ASTM D1937-98e1 Standard Test Method for Carbon Black, Pelleted8212;Mass Strength
- ASTM D1937-98 Standard Test Method for Carbon Black, Pelleted-Mass Strength
- ASTM D1937-12 Standard Test Method for Carbon Black, Pelleted—Mass Strength
- ASTM D1937-23 Standard Test Method for Carbon Black, Pelleted—Mass Strength
- ASTM D1937-21 Standard Test Method for Carbon Black, Pelleted—Mass Strength
- ASTM D1937-13 Standard Test Method for Carbon Black, Pelletedmdash;Mass Strength
- ASTM D4512-03 Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder
- ASTM D4512-03(2008) Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder
- ASTM D4512-03(2013) Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder
- ASTM D4512-03(2013)e1 Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder
- ASTM D7486-22 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
- ASTM D4180-03 Standard Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers
- ASTM D4180-03(2008) Standard Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers
- ASTM D4180-13 Standard Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers
- ASTM D1937-05 Standard Test Method for Carbon Black, Pelleted8212;Mass Strength
- ASTM E2316-14(2019)e1 Standard Test Method for Determination of Particles Resulting from the Attrition of Granular Pesticides
- ASTM E2779-10(2017) Standard Test Method for Determining Particulate Matter Emissions from Pellet Heaters
- ASTM D4699-03(2018)e1 Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles
- ASTM D4699-03(2018) Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles
- ASTM E728-91(1997) Standard Test Method for Resistance to Attrition of Granular Carriers and Granular Pesticides
- ASTM E728-91(2015) Standard Test Method for Resistance to Attrition of Granular Carriers and Granular Pesticides
- ASTM E728-91(2020) Standard Test Method for Resistance to Attrition of Granular Carriers and Granular Pesticides
- ASTM D3313-04 Standard Test Method for Carbon Black-Individual Pellet Hardness
- ASTM D3313-05 Standard Test Method for Carbon Black8212;Individual Pellet Hardness
- ASTM D3313-05a Standard Test Method for Carbon Black8212;Individual Pellet Hardness
- ASTM D5230-19 Standard Test Method for Carbon Black—Automated Individual Pellet Hardness
- ASTM D5230-09e1 Standard Test Method for Carbon Black&8212;Automated Individual Pellet Hardness
- ASTM D5230-12 Standard Test Method for Carbon Blackmdash;Automated Individual Pellet Hardness
- ASTM D5230-09 Standard Test Method for Carbon Black8212;Automated Individual Pellet Hardness
- ASTM D5230-12a Standard Test Method for Carbon Black—Automated Individual Pellet Hardness
- ASTM D5230-21 Standard Test Method for Carbon Black—Automated Individual Pellet Hardness
- ASTM D3313-12 Standard Test Method for Carbon Blackmdash;Individual Pellet Hardness
- ASTM D5230-14e1 Standard Test Method for Carbon Black&x2014;Automated Individual Pellet Hardness
- ASTM F1815-11 Standard Test Methods for Saturated Hydraulic Conductivity, Water Retention, Porosity, and Bulk Density of Athletic Field Rootzones
- ASTM D2840-69 Method of Test for Average True Particle Density of Hollow Microspheres
- ASTM E382-12 Standard Test Method for Determination of Crushing Strength of Iron Ore Pellets
- ASTM E2779-10 Standard Test Method for Determining Particulate Matter Emissions from Pellet Heaters
- ASTM E1520-99(2009) Standard Test Method for Particle Counts Per Pound of Granular Carriers and Dry-Applied Granular Formulations
- ASTM C1066-97(2004) Standard Specification for Nuclear Grade Zirconium Oxide Pellets
- ASTM C1066-97 Standard Specification for Nuclear Grade Zirconium Oxide Pellets
- ASTM D1508-23 Standard Test Method for Carbon Black, Pelleted Fines and Attrition
- ASTM E382-07 Standard Test Method for Determination of Crushing Strength of Iron Ore Pellets
- ASTM D3466-76(1998) Standard Test Method for Ignition Temperature of Granular Activated Carbon
- ASTM D2489/D2489M-16 Standard Test Method for Estimating Degree of Particle Coating of Asphalt Mixtures
- ASTM D3466-06(2018) Standard Test Method for Ignition Temperature of Granular Activated Carbon
- ASTM D7651-17 Standard Test Method for Gravimetric Measurement of Particulate Concentration of Hydrogen Fuel
- ASTM D4180-13(2018) Standard Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers
- ASTM F51-00(2007) Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
- ASTM F51-00 Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
- ASTM B930-03(2017) Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
- ASTM D7619-12 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
- ASTM D7619-12b Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
- ASTM C785-08(2022) Standard Specification for Nuclear-Grade Aluminum Oxide Pellets
- ASTM C1066-09(2022) Standard Specification for Nuclear Grade Zirconium Oxide Pellets
- ASTM C1076-09(2022) Standard Specification for Nuclear Grade Hafnium Oxide Pellets
- ASTM E1037-15 Standard Test Method for Measuring Particle Size Distribution of RDF-5
- ASTM D5230-05 Standard Test Method for Carbon Black8212;Automated Individual Pellet Hardness
- ASTM D5230-04e1 Standard Test Method for Carbon Black8212;Automated Individual Pellet Hardness
- ASTM D5230-04 Standard Test Method for Carbon Black8212;Automated Individual Pellet Hardness
- ASTM D2489-02 Standard Practice for Estimating Degree of Particle Coating of Bituminous-Aggregate Mixtures
- ASTM D2489/D2489M-08 Standard Practice for Estimating Degree of Particle Coating of Bituminous-Aggregate Mixtures
- ASTM E1772-95 Standard Test Method for Particle Size Distribution of Chromatography Media by Electric Sensing Zone Technique
- ASTM E1772-95(2001) Standard Test Method for Particle Size Distribution of Chromatography Media by Electric Sensing Zone Technique
- ASTM C1076-09 Standard Specification for Nuclear Grade Hafnium Oxide Pellets
- ASTM D5159-04(2020) Standard Guide for Dusting Attrition of Granular Activated Carbon
- ASTM D185-07(2012) Standard Test Methods for Coarse Particles in Pigments
- ASTM D5159-21 Standard Guide for Dusting Attrition of Granular Activated Carbon
- ASTM C785-08 Standard Specification for Nuclear-Grade Aluminum Oxide Pellets
- ASTM D185-07(2023) Standard Test Methods for Coarse Particles in Pigments
- ASTM D185-07(2019) Standard Test Methods for Coarse Particles in Pigments
- ASTM C1076-09(2015) Standard Specification for Nuclear Grade Hafnium Oxide Pellets
- ASTM C1066-09(2015) Standard Specification for Nuclear Grade Zirconium Oxide Pellets
- ASTM C785-08(2015) Standard Specification for Nuclear-Grade Aluminum Oxide Pellets
- ASTM D185-07 Standard Test Methods for Coarse Particles in Pigments
- ASTM D8120-17 Standard Test Method for Ferrous Debris Quantification
- ASTM D4512-22 Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder
- ASTM D4512-03(2018)e1 Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder
- ASTM D5644-96 Standard Test Method for Rubber Compounding Materials—Determination of Particle Size Distribution of Vulcanized Particulate Rubber
- ASTM F51/F51M-00(2014)e1 Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
- ASTM D6175-98 Standard Test Method for Radial Crush Strength of Extruded Catalyst Particles
- ASTM D5230-13 Standard Test Method for Carbon Blackmdash;Automated Individual Pellet Hardness
- ASTM E726-01(2011)e1 Standard Test Method for Particle Size Distribution of Granular Carriers and Granular Pesticides
- ASTM E726-01(2015) Standard Test Method for Particle Size Distribution of Granular Carriers and Granular Pesticides
- ASTM D5817-03 Standard Practice for Carbon Black, Pelleted-Reduction, Blending, and Drying of Gross Samples for Testing
- ASTM D5817-03a Standard Practice for Carbon Black, Pelleted8212;Reduction, Blending, and Drying of Gross Samples for Testing
- ASTM C357-07 Standard Test Method for Bulk Density of Granular Refractory Materials
- ASTM C357-07(2009)e1 Standard Test Method for Bulk Density of Granular Refractory Materials
- ASTM C357-07(2022) Standard Test Method for Bulk Density of Granular Refractory Materials
- ASTM C520-15(2020) Standard Test Methods for Density of Granular Loose Fill Insulations
- ASTM D1513-05(2017) Standard Test Method for Carbon Black, Pelleted—Pour Density
- ASTM C357-07(2022)e1 Standard Test Method for Bulk Density of Granular Refractory Materials
- ASTM E727/E727M-08(2013) Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
- ASTM D1508-99 Standard Test Method for Carbon Black, Pelleted-Fines and Attrition
- ASTM C123/C123M-11 Standard Test Method for Lightweight Particles in Aggregate
- ASTM E871-82(1998) Standard Method of Moisture Analysis of Particulate Wood Fuels
- ASTM D3466-06(2011) Standard Test Method for Ignition Temperature of Granular Activated Carbon
- ASTM E1620-97 Standard Terminology Relating to Liquid Particles and Atomization
- ASTM D1508-12(2017) Standard Test Method for Carbon Black, Pelleted Fines and Attrition
- ASTM D7711-23 Standard Guide for Description of Polymer Pellet Defects
- ASTM D7711-11 Standard Guide for Description of Polymer Pellets Including Defects
- ASTM D7711-11e1 Standard Guide for Description of Polymer Pellet Defects
- ASTM D5230-00e2 Standard Test Method for Carbon Black8212;Automated Individual Pellet Hardness
- ASTM D5230-00e1 Standard Test Method for Carbon Black8212;Automated Individual Pellet Hardness
- ASTM D5230-00 Standard Test Method for Carbon Black-Automated Individual Pellet Hardness
- ASTM D5230-03 Standard Test Method for Carbon Black8212;Automated Individual Pellet Hardness
- ASTM D2489-00 Standard Practice for Estimating Degree of Particle Coating of Bituminous-Aggregate Mixtures
- ASTM D5230-10 Standard Test Method for Carbon Black&8212;Automated Individual Pellet Hardness
- ASTM D5230-14 Standard Test Method for Carbon Black—Automated Individual Pellet Hardness
- ASTM F1815-97 Standard Test Method for Saturated Hydraulic Conducitivity, Water Retention, Porosity, Particle Density, and Bulk Density of Putting Green and Sports Turf Root Zones
- ASTM D7634-10(2017) Standard Test Method for Visualizing Particulate Sizes and Morphology of Particles Contained in Hydrogen Fuel by Microscopy
- ASTM D7486-14 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
- ASTM D5644-18 Standard Test Method for Rubber Compounding Materials—Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber
- ASTM F51/F51M-00(2007)e1 Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
- ASTM E550-87(2008) Standard Guide for Preparing Granular Pesticide Ground Applicator Calibration Procedures
- ASTM D5651-21 Standard Test Method for Surface Bond Strength of Wood-Base Fiber and Particle Panel Materials
- ASTM D422-63(2007)e1 Standard Test Method for Particle-Size Analysis of Soils
- ASTM C1603-05a Standard Test Method for Measurement of Solids in Water
- ASTM C1603-04e1 Standard Test Method for Measurement of Solids in Water
- ASTM C1603-04 Standard Test Method for Measurement of Solids in Water
- ASTM D422-63(1998) Standard Test Method for Particle-Size Analysis of Soils
- ASTM D6290-05e1 Standard Test Method for Color Determination of Plastic Pellets
- ASTM D6225-98e1 Standard Test Method for Granule Cover of Mineral Surfaced Roofing
- ASTM D6290-18 Standard Test Method for Color Determination of Plastic Pellets
- ASTM D6290-98e1 Standard Test Method for Color Determination of Plastic Pellets
- ASTM D1511-00e2 Standard Test Method for Carbon Black-Pellet Size Distribution
- ASTM D6225/D6225M-98(2020) Standard Test Method for Granule Cover of Mineral-Surfaced Roofing
- ASTM E1620-97(2022) Standard Terminology Relating to Liquid Particles and Atomization
- ASTM E1620-97(2016) Standard Terminology Relating to Liquid Particles and Atomization
- ASTM D1511-12(2023) Standard Test Method for Carbon Black—Pellet Size Distribution
- ASTM D6290-19 Standard Test Method for Color Determination of Plastic Pellets
- ASTM C123/C123M-14 Standard Test Method for Lightweight Particles in Aggregate
- ASTM B930-03(2021) Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
- ASTM E2316-03(2014) Standard Test Method for Determination of Particles Resulting from the Attrition of Granular Pesticides
- ASTM D8208-19 Standard Practice for Collection of Non-Fibrous Nanoparticles Using a Nanoparticle Respiratory Deposition (NRD) Sampler
- ASTM E1509-95(2000) Standard Specification for Room Heaters, Pellet Fuel-Burning Type
- ASTM D3018/D3018M-10a Standard Specification for Class A Asphalt Shingles Surfaced with Mineral Granules
- ASTM E1509-22 Standard Specification for Room Heaters, Pellet Fuel-Burning Type
- ASTM C784-20 Standard Specification for Nuclear-Grade Aluminum Oxide-Boron Carbide Composite Pellets
- ASTM C520-98 Standard Test Methods for Density of Granular Loose Fill Insulations
- ASTM C520-04 Standard Test Methods for Density of Granular Loose Fill Insulations
- ASTM C520-04(2010) Standard Test Methods for Density of Granular Loose Fill Insulations
- ASTM C1252-03 Standard Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading)
- ASTM C1252-06 Standard Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading)
- ASTM F1926/F1926M-14(2021) Standard Test Method for Dissolution Testing of Calcium Phosphate Granules, Fabricated Forms, and Coatings
- ASTM D4179-22 Standard Test Method for Single Pellet Crush Strength of Formed Catalysts and Catalyst Carriers
- ASTM D7619-10 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
- ASTM E1919-03 Standard Guide for Worldwide Published Standards Relating to Particle and Spray Characterization
- ASTM C492-92(2017) Standard Test Method for Hydration of Granular Dead-Burned Refractory Dolomite
- ASTM E1521-01(2006) Standard Test Method for Liquid Holding Capacity of Granular Carriers
- ASTM E1509-04 Standard Specification for Room Heaters, Pellet Fuel-Burning Type
- ASTM D6791-06 Standard Test Method for Determination of Grain Stability of Calcined Petroleum Coke
- ASTM D2338-02(2007) Standard Test Method for Determining Particle Size of Multicolor Lacquers
- ASTM D2338-02 Standard Test Method for Determining Particle Size of Multicolor Lacquers
- ASTM D2338-84(1996)e1 Standard Test Method for Determining Particle Size of Multicolor Lacquers
- ASTM E1521-01 Standard Test Method for Liquid Holding Capacity of Granular Carriers
- ASTM E1521-93(1998) Standard Test Method for Liquid Holding Capacity of Granular Carriers
- ASTM C922-21 Standard Specification for Sintered Gadolinium Oxide-Uranium Dioxide Pellets for Light Water Reactors
- ASTM C922-08 Standard Specification for Sintered Gadolinium Oxide-Uranium Dioxide Pellets
- ASTM E2524-08 Standard Test Method for Analysis of Hemolytic Properties of Nanoparticles
- ASTM D6791-02 Standard Test Method for Determination of Grain Stability of Calcined Petroleum Coke
- ASTM D1404/D1404M-99(2003) Standard Test Method for Estimation of Deleterious Particles in Lubricating Grease
- ASTM D1404/D1404M-99(2019) Standard Test Method for Estimation of Deleterious Particles in Lubricating Grease
- ASTM E1521-19 Standard Test Method for Liquid Holding Capacity of Granular Carriers
- ASTM E871-82(2019) Standard Test Method for Moisture Analysis of Particulate Wood Fuels
- ASTM F1904-14 Standard Practice for Testing the Biological Responses to Particles in vivo
- ASTM D3018/D3018M-11 Standard Specification for Class A Asphalt Shingles Surfaced with Mineral Granules
- ASTM C922-14 Standard Specification for Sintered Gadolinium Oxide-Uranium Dioxide Pellets
- ASTM C142/C142M-17 Standard Test Method for Clay Lumps and Friable Particles in Aggregates
- ASTM D2338-02(2013) Standard Test Method for Determining Particle Size of Multicolor Lacquers
- ASTM D2687-95(2016) Standard Practices for Sampling Particulate Ion-Exchange Materials
- ASTM E1509-12 Standard Specification for Room Heaters, Pellet Fuel-Burning Type
- ASTM D7711-11(2015) Standard Guide for Description of Polymer Pellet Defects
- ASTM C1252-98 Standard Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading)
- ASTM D7486-08 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
- ASTM D7486-08(2013)e1 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
- ASTM D6175-03 Standard Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles
- ASTM D6175-03(2019) Standard Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles
- ASTM D6175-03(2008) Standard Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles
- ASTM D6175-03(2013) Standard Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles
- ASTM D8049-17 Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Particle Analyzer
- ASTM D6331-14 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations &40;Manual Gravimetric Method&41;
- ASTM D4781-03(2008) Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles
- ASTM D4781-03(2013) Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles
- ASTM B930-03 Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
- ASTM B930-03(2008) Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
- ASTM B930-03(2012) Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
- ASTM E1509-12(2017) Standard Specification for Room Heaters, Pellet Fuel-Burning Type
- ASTM D3018-03 Standard Specification for Class A Asphalt Shingles Surfaced with Mineral Granules
- ASTM D2434-68(2000) Standard Test Method for Permeability of Granular Soils (Constant Head)
- ASTM D3398-00 Standard Test Method for Index of Aggregate Particle Shape and Texture
- ASTM D5861-95(2002) Standard Guide for Significance of Particle Size Measurements of Coating Powders
- ASTM D6225-98 Standard Test Method for Granule Cover of Mineral Surfaced Roofing
- ASTM D3018-00 Standard Specification for Class A Asphalt Shingles Surfaced with Mineral Granules
- ASTM D5817-96 Standard Practice for Carbon Black, Pelleted-Reduction and Blending of Gross Samples
- ASTM D3398-00(2006) Standard Test Method for Index of Aggregate Particle Shape and Texture
- ASTM D3018-03(2009) Standard Specification for Class A Asphalt Shingles Surfaced with Mineral Granules
- ASTM D3018/D3018M-10 Standard Specification for Class A Asphalt Shingles Surfaced with Mineral Granules
- ASTM D225-65(1978) Standard Specification for Asphalt Shingles (Organic Felt) Surfaced With Mineral Granules
- ASTM D3018/D3018M-22 Standard Specification for Class A Asphalt Shingles Surfaced with Mineral Granules
- ASTM F303-08 Standard Practices for Sampling for Particles in Aerospace Fluids and Components
- ASTM D6225-98(2004) Standard Test Method for Granule Cover of Mineral Surfaced Roofing
- ASTM D6225/D6225M-98(2012)e1 Standard Test Method for Granule Cover of Mineral Surfaced Roofing
- ASTM D7684-11(2020) Standard Guide for Microscopic Characterization of Particles from In-Service Lubricants
- ASTM D7684-11(2016) Standard Guide for Microscopic Characterization of Particles from In-Service Lubricants
- ASTM D1554-10(2016) Standard Terminology Relating to Wood-Base Fiber and Particle Panel Materials
- ASTM D2067-97(2008) Standard Test Method for Coarse Particles in Printing Ink Dispersions
- ASTM D2067-97(2008)e1 Standard Test Method for Coarse Particles in Printing Ink Dispersions
- ASTM D2067-97(2013) Standard Test Method for Coarse Particles in Printing Ink Dispersions
- ASTM D5861-07(2013) Standard Guide for Significance of Particle Size Measurements of Coating Powders
- ASTM D1554-10(2023) Standard Terminology Relating to Wood-Base Fiber and Particle Panel Materials
- ASTM C142/C142M-17(2023) Standard Test Method for Clay Lumps and Friable Particles in Aggregates
- ASTM F327-08(2022) Standard Practice for Sampling Gas Blow Down Systems and Components for Particulate Contamination by Automatic Particle Monitor Method
RO-ASRO, Standard Density Granules
VN-TCVN, Standard Density Granules
- TCVN 6863-2001 Soil quality.Determination of particle density
- TCVN 6530-12-2007 Refractories.Method of test.Part 12: Determination of bulk density of granular materials
ES-AENOR, Standard Density Granules
Association Francaise de Normalisation, Standard Density Granules
- NF X31-554:2014 Soil quality - Determination of particle density
- NF X34-112*NF EN ISO 18847:2016 Solid biofuels - Determination of particle density of pellets and briquettes
- NF ISO 9136-1:2005 Grains abrasifs - Détermination de la masse volumique apparente - Partie 1 : macrograins
- NF X31-554:1998 Soil quality. Determination of particle density.
- NF X31-554*NF EN ISO 11508:2017 Soil quality - Determination of particle density
- NF ISO 2031:2015 Granulés de liège - Détermination de la masse volumique apparente
- NF ISO 1306:2005 Ingrédients de mélange du caoutchouc - Noir de carbone (en granules) - Détermination de la masse volumique apparente
- NF P98-643:1993 Horizontal road signs. Road markings. Separating method of glass particles in marking products : dense liquid method.
- NF EN 543:2003 Adhésifs - Détermination de la masse volumique apparente des adhésifs en poudre et en granules
- NF EN ISO 18847:2016 Biocombustibles solides - Détermination de la masse volumique unitaire des granulés et des briquettes
- NF P94-054:1991 Soils : investigation and testing. Determination of particle density. Pycnometer method.
- NF T54-050:1977 Evaluation of the reference density of polyethylene in form of granulates.
- NF ISO 9278:2009 Énergie nucléaire - Pastilles de dioxyde d'uranium - Détermination de la masse volumique et de la fraction volumique de pores ouverts et fermés
- NF X43-049*NF EN 12341:2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
- NF P18-650-6:2014 Tests for mechanical and physical properties of aggregates - Part 6 : determination of particle density and water absorption
Korean Agency for Technology and Standards (KATS), Standard Density Granules
- KS I ISO 11508-2009(2014) Soil quality－Determination of particle density
- KS M ISO 18847:2022 Solid biofuels — Determination of particle density of pellets and briquettes
- KS F 2308-2016 Test method for density of soil particles
- KS F 2308-2022 Test method for density of soil particles
- KS F 2308-2016(2021) Test method for density of soil particles
- KS M ISO 2031:2020 Granulated cork — Determination of apparent bulk density
- KS A ISO 9278-2014(2019) Nuclear energy — Uranium dioxide pellets — Determination of density and volume fraction of open and closed porosity
- KS F 2533-2017(2022) Methods of test for particle density and water absorption of light weight coarse aggregates for structural concrete
- KS F 2529-2017(2022) Methods of test for particle density and water absorption of light weight fine aggregates for structural concrete
- KS F 2529-2017 Methods of test for particle density and water absorption of light weight fine aggregates for structural concrete
- KS F 2533-2017 Methods of test for particle density and water absorption of light weight coarse aggregates for structural concrete
- KS F 2575-2013(2018) Standard test method for flat or elongated particles in coarse aggregate
International Organization for Standardization (ISO), Standard Density Granules
- ISO 8840:1987 Refractory materials; Determination of bulk density of granular materials (grain density)
- ISO 8840:2021 Refractory materials - Determination of bulk density of granular materials (grain density)
- ISO 18747-1:2018 Determination of particle density by sedimentation methods - Part 1: Isopycnic interpolation approach
- ISO 14411-2:2020 Preparation of particulate reference materials — Part 2: Polydisperse spherical particles
- ISO 18747-2:2019 Determination of particle density by sedimentation methods — Part 2: Multi-velocity approach
- ISO 20290-1:2021 Aggregates for concrete - Test methods for mechanical and physical properties - Part 1: Determination of bulk density, particle density, particle mass-per-volume and water absorption
- ISO 18847:2016 Solid biofuels - Determination of particle density of pellets and briquettes
- ISO 6783:1982 Coarse aggregates for concrete; Determination of particle density and water absorption; Hydrostatic balance method
- ISO 4365:2005 Liquid flow in open channels - Sediment in streams and canals - Determination of concentration, particle size distribution and relative density
- ISO 4365:1985 Liquid flow in open channels; Sediment in streams and canals; Determination of concentration, particle size distribution and relative density
- ISO 17892-3:2015 Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density
RU-GOST R, Standard Density Granules
- GOST ISO 8840-2014 Refractory materials. Determination of bulk density of granular materials (grain density)
- GOST 33507-2015 Solid biofuel. Determination of particle density
- GOST R 55124-2012 Solid biofuels. Determination of particle density
- GOST 33583-2015 Granular activated carbon. Standard method for determination of dusting attrition
European Committee for Standardization (CEN), Standard Density Granules
- prEN ISO 18847 rev Solid biofuels — Determination of particle density of pellets and briquettes
- EN ISO 18847:2016 Solid biofuels - Determination of particle density of pellets and briquettes
- EN 15150:2011 Solid biofuels - Determination of particle density
- CEN/TS 15405:2010 Solid recovered fuels - Determination of density of pellets and briquettes
- EN 993-18:2002 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum
- FprEN 1097-6-2021 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
- EN 13205-1:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 1: General requirements
- FprEN 12341 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
KR-KS, Standard Density Granules
未注明发布机构, Standard Density Granules
- BS ISO 9136-1:2004(2008) Abrasive grains — Determination of bulk density — Part 1 : Macrogrits
- JIS Z 8899:2023 Particulate reference materials -- Specifications and uncertainty evaluation for polydisperse spherical particles
- BS EN 543:2003(2007) Adhesives — Determination of apparent density of powder and granule adhesives
German Institute for Standardization, Standard Density Granules
- DIN EN ISO 18847:2016-12 Solid biofuels - Determination of particle density of pellets and briquettes (ISO 18847:2016); German version EN ISO 18847:2016
- DIN EN ISO 11508:2018-04 Soil quality - Determination of particle density (ISO 11508:2017); German version EN ISO 11508:2017
- DIN EN ISO 18847:2023-07 Solid biofuels - Determination of particle density of pellets and briquettes (ISO/DIS 18847:2023); German and English version prEN ISO 18847:2023 / Note: Date of issue 2023-05-26*Intended as replacement for DIN EN ISO 18847 (2016-12).
- DIN ISO 9136-1:2006-03 Abrasive grains - Determination of bulk density - Part 1: Macrogrits (ISO 9136-1:2004)
- DIN CEN/TS 15405:2010-11*DIN SPEC 1152:2010-11 Solid recovered fuels - Determination of density of pellets and briquettes; German version CEN/TS 15405:2010
- DIN EN 543:2003-08 Adhesives - Determination of apparent density of powder and granule adhesives; German version EN 543:2003
- DIN EN 15150:2012 Solid biofuels - Determination of particle density; German version EN 15150:2011
- DIN 54408:1998 Testing of ion exchangers - Determination of bulk weight density, equilibrium moisture content and solids
- DIN 25495:1991 Determination of density and total porosity of uranium dioxide pellets by the mercury displacement method
- DIN 18124:2019-02 Soil, investigation and testing - Determination of density of solid particles - Wide mouth pycnometer
- DIN 54408:2007 Testing of ion exchangers - Determination of bulk weight density, equilibrium moisture content and solids
- DIN EN 993-18:2002 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum; German version EN 993-18:2002
- DIN EN 15805:2022-06 Particulate air filters for general ventilation - Standardised dimensions; German version EN 15805:2021
- DIN EN 1097-6:2022 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
- DIN 25494:1991-04 Determination of density and open and closed porosity of uranium dioxide pellets; boiling water and immersion method
- DIN 18124:1997 Soil, investigation and testing - Determination of density of solid particles - Capillary pyknometer, wide mouth pycnometer
ES-UNE, Standard Density Granules
- ISO/DIS 18847:2023 Solid biofuels — Determination of particle density of pellets and briquettes
- UNE-EN 15805:2022 Particulate air filters for general ventilation - Standardised dimensions
BR-ABNT, Standard Density Granules
PT-IPQ, Standard Density Granules
AENOR, Standard Density Granules
- UNE 56919:1990 GRANULATED CORK. BULK DENSITY TEST.
- UNE 103302:1994 DETERMINATION OF THE RELATIVE DENSITY OF THE PARTICLES OF A SOIL.
- UNE-EN ISO 18847:2017 Solid biofuels - Determination of particle density of pellets and briquettes (ISO 18847:2016)
- UNE-EN 543:2003 Adhesives - Determination of apparent density of powder and granule adhesives
- UNE 103900:2013 In situ determination of density and moisture content of soil and granular materials by nuclear methods: low depths.
- UNE-EN 1097-6:2014 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
- UNE-EN 12341:2015 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
SE-SIS, Standard Density Granules
Danish Standards Foundation, Standard Density Granules
- DS/ISO 11508:1999 Soil quality - Determination of particle density
- DS/EN 15150:2012 Solid biofuels - Determination of particle density
- DS/CEN/TS 15405:2010 Solid recovered fuels - Determination of density of pellets and briquettes
- DS 406.2:1987 Lightweight aggregates for concrete. Determination of grain density and water absorption
- DS/EN 543:2003 Adhesives - Determination of apparent density of powder and granule adhesives
- DS/EN 1097-6:2013 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
Japanese Industrial Standards Committee (JISC), Standard Density Granules
- JIS A 1202:1990 Test method for density of soil particles
- JIS A 1202:1999 Test method for density of soil particles
- JIS A 1202:2009 Test method for density of soil particles
- JIS R 1620:1995 Testing methods for particle density of fine ceramic powder
- JIS R 1639-2:1999 Test methods of properties of fine ceramic granules Part 2: Bulk density
- JIS R 6001-2:2017 Bonded abrasives -- Determination and designation of grain size distribution -- Part 2: Microgrits
- JIS K 6219-2:2006 Carbon black for rubber industry -- Characteristics of pelletized carbon black -- Part 2: Determination of pour density
- JIS A 1135:1999 Methods of test for particle density and water absorption of light weight coarse aggregates for structural concrete
- JIS A 1134:1999 Methods of test for particle density and water absorption of light weight fine aggregates for structural concrete
- JIS A 1134:2006 Methods of test for particle density and water absorption of lightweight fine aggregates for structural concrete
- JIS A 1135:2006 Methods of test for particle density and water absorption of lightweight coarse aggregates for structural concrete
- JIS A 1134 AMD 1:2022 Methods of test for particle density and water absorption of lightweight fine aggregates for structural concrete (Amendment 1)
- JIS Z 8900-1:2008 Standards particles -- Part 1: Reference particles for calibrating particle size measurements apparatus
CU-NC, Standard Density Granules
- NC 43-09-1968 Particle boards and fibre boards Determinatipn of density
- NC 43-08-1-1987 Artificial and Natural Wood Induistry. Partiole and Fibre Boards. Determination of Density
NL-NEN, Standard Density Granules
- NEN 5926-1990 Aggregates for concrete - Determination of partiele density
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Standard Density Granules
- GB/T 30071-2013 High-density and fine-particle special graphite product
- GB/T 2999-2016 Test method for bulk density of refractory particles
- GB/T 2999-2002 Refractory materials--Determination of bulk density of granular materials
- GB/T 42660-2023 Calibration of aerosol particle number concentration condensation nuclei particle counters
- GB/T 7702.4-1997 Standard test method for granular activated carbon from coal--Determination of apparent density
- GB/T 31057.1-2014 Granular materials.The physical properties.Part 1:Determination of apparent density
- GB/T 42351.1-2023 Preparation of Particle Standards Part 1: Polydisperse Standards Based on Picket Fence Distribution of Monodisperse Spherical Particles
- GB 11667-1989 Hygienic standard for inhalable particles in ambient air of residential areas
- GB/T 30202.1-2013 Test method for granular coal-based activated carbon for desulfurization and denitration process.Part 1 : Bulk density
Universal Oil Products Company (UOP), Standard Density Granules
Professional Standard - Electricity, Standard Density Granules
- DL/T 1978-2019 Classification standard for the degree of pollution of electric power oil particles
未注明发布机构, Standard Density Granules
- BS ISO 9136-1:2004(2008) Abrasive grains — Determination of bulk density — Part 1 : Macrogrits
- JIS Z 8899:2023 Particulate reference materials -- Specifications and uncertainty evaluation for polydisperse spherical particles
- BS EN 543:2003(2007) Adhesives — Determination of apparent density of powder and granule adhesives
YU-JUS, Standard Density Granules
- JUS B.B8.031-1982 Crushed aggregate. Determination of particle density and water absorption
- JUS H.P5.011-1991 Testing of pesticides.Dusts,granules,microgranules and water-dispersible powder.Determination of bulk density
- JUS K.F0.001-1989 Grain si7.es of fused alumlnium oxlde and sIlicon carbide for bonded abrasive products. ?esignaticm and graJn slze distribution
- JUS K.F0.006-1988 Grains of fused alumininm oxfdo and silJcon carbide for abrasivo products. DeterminatIon of the buJk densfty of tbe abraslve grains
- JUS K.F0.031-1989 Grains of fused aluminJuti oxide and sillcou carbide for coated abrasive products. raiv slze dlstrlbutltm and designatlon
- JUS B.D8.311-1984 Refractories. Methods of physical testing. Determ inati on of the bulk density of granular refractory materials and raws
Lithuanian Standards Office , Standard Density Granules
- LST EN 15150-2012 Solid biofuels - Determination of particle density
- LST CEN/TS 15405-2010 Solid recovered fuels - Determination of density of pellets and briquettes
- LST EN 543-2003 Adhesives - Determination of apparent density of powder and granule adhesives
- LST 1360.7-1995 Soils for road construction. Testing methods. Determination density of solid particles
- LST EN 1097-6+AC-2003 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
- LST EN 1097-6+AC-2003/A1-2005 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
- LST EN 12341-2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
The American Road & Transportation Builders Association, Standard Density Granules
- AASHTO T311-2000 Standard Method of Test for Grain-Size Analysis of Granular Soil Materials Twentieth Edition
- AASHTO T 311-2000 Standard Method of Test for Grain-Size Analysis of Granular Soil Materials
- AASHTO T 195-1967(R2007) Standard Method of Test for Determining Degree of Particle Coating of Asphalt Mixtures
- AASHTO T 195-2011 Standard Method of Test for Determining Degree of Particle Coating of Asphalt Mixtures
- AASHTO T 215-1970(R2007) Standard Method of Test for Permeability of Granular Soils (Constant Head)
- AASHTO T 215-2014 Standard Method of Test for Permeability of Granular Soils (Constant Head)
- AASHTO T 112-2021 Standard Method of Test for Clay Lumps and Friable Particles in Aggregate
National Metrological Technical Specifications of the People's Republic of China, Standard Density Granules
American National Standards Institute （ANSI), Standard Density Granules
- ANSI B74.4-1992 Procedure for Bulk Density of Abrasive Grains
- ASTM D4180-23 Standard Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers
- ASTM D4699-23 Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles
- ANSI/UL 586-2004 Standard for Safety for High-Efficiency, Particulate, Air Filter Units
- ANSI/ASTM F1815:2011 Test Methods for Saturated Hydraulic Conductivity, Water Retention, Porosity, and Bulk Density of Athletic Field Rootzones
Indonesia Standards, Standard Density Granules
CEN - European Committee for Standardization, Standard Density Granules
GM North America, Standard Density Granules
- GM GMP.PE.005-1988 Polyethylene - High Density, Copolymer, Injection Molding Grade, Pellet Form
- GM GMP.PE.004-1988 Polyethylene - High Density, Copolymer, Blow Molding/Extrusion Grade, Pellet Form
- GM GMP.PE.007-1996 Polyethylene - High Density, Copolymer, Sheet Extrusion/ Thermoforming, Pellet Form
TH-TISI, Standard Density Granules
- TIS 922-1990 Standard for tapioca pellet die
- TIS 330-1980 Standard for hard tapioca pellet
- TIS 1743-1999 Coarse aggregates for concrete.determination of particle density and water absorption.hydrostatic balance method
Professional Standard - Agriculture, Standard Density Granules
CZ-CSN, Standard Density Granules
Professional Standard - Water Conservancy, Standard Density Granules
- SL 237-054-1999 Code for test of soil - relative density test of coarse grained soil
AASHTO - American Association of State Highway and Transportation Officials, Standard Density Granules
- T 311-2000 Standard Method of Test for Grain-Size Analysis of Granular Soil Materials (Twentieth Edition)
- T 195-2018 Standard Method of Test for Determining Degree of Particle Coating of Asphalt Mixtures
- T 195-2011 Standard Method of Test for Determining Degree of Particle Coating of Asphalt Mixtures
- T 113-2018 Standard Method of Test for Lightweight Particles in Aggregate
- T 215-2014 Standard Method of Test for Permeability of Granular Soils (Constant Head)
- T 112-2000 Standard Method of Test for Clay Lumps and Friable Particles in Aggregate
Canadian Standards Association (CSA), Standard Density Granules
- CSA ISO 18847:2021 Solid biofuels - Determination of particle density of pellets and briquettes (Adopted ISO 18847:2016, first edition, 2016-09-01)
- CSA O437 SERIE-93-1993 Normes Relatives Aux Panneaux De Particules Orientees Et Panneaux De Grandes Particules Deuxieme Edition; Fiche No 1
PH-BPS, Standard Density Granules
NO-SN, Standard Density Granules
- NS 8012-1982 Geotechnical testing - Laboratory methods - Density of solid particles
US-FCR, Standard Density Granules
Hebei Provincial Standard of the People's Republic of China, Standard Density Granules
- DB13/ 1578-2012 Emission Standards for Particulate Matter in Hot-dip Galvanizing Industry
Standard Association of Australia （SAA）, Standard Density Granules
- AS/NZS 1141.7:2014
- AS 1289.3.5.1:1995 Methods of testing soils for engineering purposes Method 3.5.1: Soil classification tests-Determination of the soil particle density of a soil-Standard method
- AS 1141.7:1995 Methods for sampling and testing aggregates - Apparent particle density of filler
- AS 1141.5:2000 Methods for sampling and testing aggregates - Particle density and water absorption of fine aggregate
- AS 1141.5:1996 Methods for sampling and testing aggregates Method 5: Particle density and water absorption of fine aggregate
中国气象局, Standard Density Granules
- QX/T 509-2019 GRIMM 180 Particulate Matter Concentration Monitor Calibration Specifications
AT-ON, Standard Density Granules
- ONORM A 5561-2001 Determination of settled and compacted apparent densities of powders and granulated materials
(U.S.) Ford Automotive Standards, Standard Density Granules
Professional Standard - Chemical Industry, Standard Density Granules
Group Standards of the People's Republic of China, Standard Density Granules
- T/CCPIA 054-2020 Guidelines on development of specifications for controlled release granules
- T/CSP 001-2018 2344355433
- T/CSP 002-2018 Chinese Particle Society Group Standard Working Procedures
- T/WJZZ 009-2021 Whole measurement calibration method of particle number concentration measuring instrument
- T/SSM 5-2022 Calibration specifications for particle number concentration measuring instruments used in motor vehicle emissions
国家市场监督管理总局、中国国家标准化管理委员会, Standard Density Granules
- GB/T 31057.2-2018 Granular materials—Physical properties—Part 2: Determination of tap density
FI-SFS, Standard Density Granules
中华人民共和国国家卫生和计划生育委员会, Standard Density Granules
- GB/T 17095-1997 Hygienic standard for inhalable particulate matter in indoor air
Shanghai Provincial Standard of the People's Republic of China, Standard Density Granules
- DB31/ 49-1990 Rated standard for electromechanical power consumption of impeller aerator and pellet feed
Professional Standard - Geology, Standard Density Granules
- DZ/T 0276.3-2015 Regulation for testing the physical and mechanical properties of rock.Part 3:Test for determining the grain density of rock
Shandong Provincial Standard of the People's Republic of China, Standard Density Granules
- DB37/ 1996-2011 Integrated Emission Standards for Air Particulate Matter from Stationary Sources in Shandong Province
Society of Automotive Engineers (SAE), Standard Density Granules
- SAE TS64-2-2004 TS64 Standard Method for Microscopic Evaluation of Hydraulic Fluid Samples for Particle Contamination