ZH
RU
ES

Trapezoidal screw

Trapezoidal screw, Total:500 items.

In the international standard classification, Trapezoidal screw involves: Screw threads, Installations in buildings, Fasteners for aerospace construction, Cutting tools, Fasteners, Machine tool systems, Valves, Linear and angular measurements, Metrology and measurement in general, Components for aerospace construction, Protective equipment, Small craft, Machine tools, Equipment for the rubber and plastics industries, Powder metallurgy, Power transmission and distribution networks, Buildings, Equipment for the chemical industry, Shipbuilding and marine structures in general, Bottles. Pots. Jars, Chipless working equipment, Hand-held tools, Rails and railway components, Electromechanical components for electronic and telecommunications equipment, Bearings, Flexible drives and transmissions, Springs, Pipeline components and pipelines.


British Standards Institution (BSI), Trapezoidal screw

  • BS 4185-10:1977 Machine tool components - Trapezoidal threads for lead and feed screw assemblies
  • BS 1104:1957 Specification for general purpose Acme screw threads
  • BS ISO 2903:2016 ISO metric trapezoidal screw threads. Tolerances
  • BS 5346:1976 Specification - ISO metric trapezoidal screw threads
  • BS ISO 2902:2016 ISO metric trapezoidal screw threads. General plan
  • BS ISO 2904:2020 ISO metric trapezoidal screw threads. Basic dimensions
  • BS EN 3064:1996 Shank nuts, self-locking, serrated - Installation procedure
  • BS ISO 2901:2016 ISO metric trapezoidal screw threads. Basic and design profiles
  • 19/30397491 DC BS ISO 2904. ISO metric trapezoidal screw threads. Basic dimensions
  • BS 3A 212:1993 Specification for cadmium-plated steel bolts, 55/65 tonf/in2 (Unified hexagons, 3A Unified threads and close tolerance shanks)
  • 19/30395617 DC BS 3A 108. Steel bolts (unified hexagons and unified threads) with close tolerance shanks for aircraft
  • BS A 312:1997 Screws, pan head, internal offset cruciform ribbed or unribbed drive, stepped shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions
  • BS 4A 111:1993 Specification for cadmium-plated steel bolts (Unified hexagons and Unified threads) with close tolerance shanks
  • BS ISO 12260:2016 Aerospace. Screws, pan head, internal offset cruciform ribbed or unribbed drive, stepped shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa. Dimensions
  • BS ISO 17396:2014 Synchronous belt drives. Metric pitch, trapezoidal profile systems T and AT, belts and pulleys
  • BS EN 2587:1990 Specification for rod ends, adjustable double fork and threaded shank. Dimensions and loads
  • BS EN 2515:1990 Specification for rod ends, adjustable single fork and threaded shank. Dimensions and loads

American Society of Mechanical Engineers (ASME), Trapezoidal screw

AR-IRAM, Trapezoidal screw

BE-NBN, Trapezoidal screw

FI-SFS, Trapezoidal screw

HU-MSZT, Trapezoidal screw

RO-ASRO, Trapezoidal screw

Group Standards of the People's Republic of China, Trapezoidal screw

Association Francaise de Normalisation, Trapezoidal screw

  • NF L05-420:1955 Buttress screw threads.
  • NF E03-617*NF ISO 2903:2016 ISO metric trapezoidal screw threads - Tolerances
  • NF E03-616:1997 ISO metric trapezoidal screw threads. General plan.
  • NF E03-617:1997 ISO metric trapezoidal screw threads. Tolerances.
  • NF E03-616*NF ISO 2902:2016 ISO metric trapezoidal screw threads - General plan
  • NF ISO 2902:2016 Filetages métriques trapézoïdaux ISO - Vue d'ensemble
  • NF ISO 2903:2016 Filetages métriques trapézoïdaux ISO - Tolérances
  • NF L36-135:1971 SCREWED END FORKS.
  • NF ISO 2901:2016 Filetages métriques trapézoïdaux ISO - Profils de base et nominal
  • NF E03-622:2004 ISO metric trapezoidal screw threads - Basic dimensions.
  • NF ISO 2904:2020 Filetages métriques trapézoïdaux ISO - Dimensions de base
  • NF E03-615*NF ISO 2901:2016 ISO metric trapezoidal screw threads. Basic profile and maximum material profiles.
  • NF E03-615:1997 ISO metric trapezoidal screw threads. Basic profile and maximum material profiles.
  • NF E03-619:2007 ISO metric trapezoidal screw threads - Checking by limit gauges.
  • NF E03-620:1997 Checking of ISO metric trapezoidal threads with gauges. Screw gauges for internal threads.
  • NF E03-619:1997 Checking of ISO metric trapezoidal threads with gauges. Screw gauges for external threads.
  • NF L36-137:1971 SCREWED END FORKS FOR BALL BEARINGS.
  • NF E03-612:2007 Asymmetrical trapezoidal screw thread, artillery type, 3 o - 45 o - Checking by limit gauges.
  • NF E74-367:2009 Assembly tools for screws and nuts - Square drive adaptor with hexagon or cylindrical flat drive, for power socket wrenches.
  • NF E74-367*NF ISO 3317:2015 Assembly tools for screws and nuts - Square drive adaptor with hexagon or cylindrical flat drive, for power socket wrenches
  • NF E03-621:1997 Checking of ISO metric trapezoidal threads with gauges. Plain gauges for external and internal threads.
  • NF F56-202:1984 Fixed railway equipment. Material for telecommunication and signalling overhead lines. Trapezoidal tie bar.
  • NF E03-612:1982 Asymmetrical trapezoidal screw thread, artillery type, 3 degrees- 45 degrees. Checking by limit gauges.
  • NF E03-611:2007 Asymmetrical trapezoidal screw thread, artillery type, 3 o - 45 o - Basic profile - Dimensions and tolerances.
  • NF E03-611:1982 Asymmetrical trapezoidal screw thread, artillery type, 3 degrees-45 degrees. Basic profile. Dimensions and tolerances.
  • NF L35-140:1954 Fork joints for control linkage. Model with threaded end (rech.).
  • NF L24-381*NF EN 2931:1994 Aerospace series. Bolts, T-head, relieved shank, long thread, in heat resisting steel fe-PA92HT (A286). Classification : 900 MPa (at ambient temperature) / 650 degrees celsius.
  • NF L35-171:1974 Rod-ends with self-lubricating spherical bearing . Long threaded shank and keyway. Dimensions and loads.
  • NF L35-170:1974 Rod-ends with self-lubricating spherical bearing . Long threaded shank without keyway. Dimensions and loads.
  • NF EN 2587:1990 Série aérospatiale - Embouts réglables à chape double et à tige filetée - Dimensions et charges.
  • NF EN 2515:1990 Série aérospatiale - Embouts réglables à chape simple et à tige filetée - - Dimensions et charges.

American National Standards Institute （ANSI), Trapezoidal screw

PL-PKN, Trapezoidal screw

Japanese Industrial Standards Committee (JISC), Trapezoidal screw

  • JIS B 0222:1980 29 degrees trapezoidal screw threads
  • JIS B 0216:1987 Metric trapezoidal screw threads
  • JIS B 0217:1980 Tolerance system for metric trapezoidal screw threads
  • JIS B 0216-3:2013 ISO metric trapezoidal screw threads -- Basic dimensions
  • JIS B 0218:1980 Limit of sizes and tolerances for metric trapezoidal screw threads
  • JIS B 0216-2:2013 ISO metric trapezoidal screw threads.Part 2: General plan
  • JIS B 0217-2:2013 ISO metric trapezoidal screw threads.Tolerances .Part 2: Limits of sizes for external and internal screw thread
  • JIS B 0217-1:2013 ISO metric trapezoidal screw threads.Tolerances .Part 1: Principles and basic data
  • JIS B 0216-1:2013 ISO metric trapezoidal screw threads.Part 1: Basic profiles and maximum material profiles

Korean Agency for Technology and Standards (KATS), Trapezoidal screw

未注明发布机构, Trapezoidal screw

Taiwan Provincial Standard of the People's Republic of China, Trapezoidal screw

  • CNS 513-1978 Metric Trapezoidal Screw Threads (Allowance and Tolerance for General Purpose Trapezoidal Screw Threads)
  • CNS 511-1978 Metric Trapezoidal Screw Thread (Profiles)
  • CNS 512-1978 Metric Trapezoidal Screw Thread (Genral Plan)
  • CNS 4225-1978 Stub Metric Trapezoidal Screw Threads-Profiles
  • CNS 4226-1978 Stub Metric Trapezoidal Screw Threads-General Plan
  • CNS 4428-1992 Hexagon Nuts, Rounded Trapezoidal Thread
  • CNS 514-1978 Metric Trapezoidal Screw Thread (Basic Sizes)
  • CNS 4429-1992 Hexagon Nuts, Rounded Trapezoidal Thread
  • CNS 4552-1978 Rounded Trapezoidal Thread Nominal Sizes
  • CNS 4221-1978 Metric Trapezoidal Screw Thread (Limits for Internal Screw Threads From 8mm to 100mm)
  • CNS 4222-1978 Metric Trapezoidal Screw Thread (Limits for Internal Screw Threads from 105 mm to 300 mm)
  • CNS 4223-1978 Metric Trapezoidal Screw Thread Limits for External Screw Threads from 8 mm to 100 mm
  • CNS 4224-1978 Metric Trapezoidal Screw THread (Limits for Externational Screw Threads from 105 mm to 300 mm )
  • CNS 8492-1988 Marine Bronze 5 ｋｇｆ/ｃ㎡ Screwdown Check Globe Valves
  • CNS 8494-1988 Cast Iron-down Check Globe Valves for Marine Use (5 ｋｇｆ/ｃ㎡)
  • CNS 8825-1988 Marine Cast Iron 10 ｋｇｆ/ｃ㎡ Screw - Down Check Globe Valves
  • CNS 8961-1988 Marine Cast Iron 16 ｋｇｆ/ｃ㎡ Screw-down Check Globe Valves
  • CNS 4325-1978 Rundut and Undercut for Metric Trapezoidal Screw Threads, Knuckle Screw Threads, Bultress Screw Threads and Other Screw Threads of Coarse Pitches
  • CNS 10802-1984 Single-Start and Double-Start Trapezoidal Screw Thread with Clearance for Railway Rolling Stock (Theoretical Values)
  • CNS 4772-1979 Hexagon and Castle Nuts with Round Thread for Motive Power Unit Turnbuckles and Drawbars
  • CNS 4553-1978 Rounded Trapezoidal Thread Limits of Sizes and Deviations Tolerances and Permissible Weal of Thread Gauges
  • CNS 9487-1988 Marine Bronze 5 ｋｇｆ/ｃ㎡ Screw - Down Check Globe Valves ( Union Bonnet Type )
  • CNS 9489-1988 Marine Bronze 16 ｋｇｆ/ｃ㎡ Screw - Down Check Globe Valves (Union Bonnet Type)
  • CNS 10803-1984 Single-Start and Double-Start Trapezoidal Screw Threads with Clearance for Railway Rolling Stock (Thread Limits and Allowances, Permissible Manufacturing Variations and Permissible Wear on Screw Gauges

CZ-CSN, Trapezoidal screw

  • CSN 22 3097-1970 Nut taps for trapezoidal thread (medium lead series)
  • CSN 01 4051-1989 Multiple trapezoidal screw threads
  • CSN 01 4363-1979 Trapezoidal screw threads. Tolerances
  • CSN 25 4075-1987 Limit screw plug gauges. Trapezoidal screw threads
  • CSN 25 4017-1994 Gauges for trapezoidal thread. Deviations
  • CSN 25 4080-1987 Solid GO screw ring gauges. Trapezoidal screw threads
  • CSN 25 4018-1983 Limit screw gauges for trapezoidal screw. Functional dimensions
  • CSN 01 4050-1979 Trapezoidal screw threads.Profilas, diametres and pitcli, basic dimensions
  • CSN 25 4213-1962 Cylindrical thread "not go" gauges. Nor- al trapezoidal thread. Diameter 4—100 mm
  • CSN 25 4090-1987 Solid NOT GO screw ring gauges. Trapezoidal screw threads
  • CSN 25 4210-1962 Cylindrical limit thread gauges, both- ided. Normal trapezoidal thread. Dia- eter from 10 to 32 mm.
  • CSN 25 4220-1962 Rilig limit thread "go" gauges. Normal rapezoidal thread. Diameter 10—100 mm
  • CSN 25 4221-1962 Reference gauges for new ring thread go" gauges. Normal trapezoidal thread. iameter 10—100 mm
  • CSN 25 4226-1962 Reference gauges for ring thread "not o" gauges. Normal trapezoidal thread. iameter 10—100 mm
  • CSN 25 4084-1987 Wear check plug for solid and adjustable GO screw ring gauge. Trapezoidal screw threads
  • CSN 25 4081-1987 Minimum and maximum check plugs for solid GO screw ring gauge. Trapezoidal screw threads
  • CSN 25 4211-1962 Cylindrical thread "go" gauges. rapezoidal normal thread, gDiameter 34—100 mm
  • CSN 25 4225-1962 Limit ring thread "not go" gauges. ormal trapezoidal thread. Diameter 0-100 mm
  • CSN 25 4094-1987 Wear check plug for solid and adjustable NOT GO screw ring gauge. Trapezoidal screw threads
  • CSN 01 4093-1953
  • CSN 25 4223-1962 Reference gauges on wearing for ring hread "go" gauges. Normal trapezoidal hread. Diameter 10—100 mm
  • CSN 25 4091-1987 Minimum and maximum check plug for solid NOT GO screw ring gauge. Trapezoidal screw threads
  • CSN 25 4227-1962 Measuring parts of reference gauges for ing thread "not go" gauges. Trapezoidal hread. Diameter 10—100 mm
  • CSN 01 4094-1953
  • CSN 25 4222-1962 Measuring parts of reference gauges for ew ring thread "go" gauges. Normal rapezoidal thread. Diameter 10—100 mm
  • CSN 02 6015-1976 Compression and tension helical springs of bars of circular section, hot-formed — technical conditions
  • CSN 25 4214-1962 Measuring parts for ,,not go" limits of ylindrical thread gauges. Normal trape- oidal thread. Diameter 10—100 mm
  • CSN 02 6003-1988 Cylindrical helical compression and ex-tension springs made of round wire and bars. Selection of fundamental dimensions
  • CSN 02 6009-1978 Helical torsion springs of wire and bars with circular section. Technical delivery regulations
  • CSN 02 6002-1988 Cylindrical helical compression and tension springs made of cilcular section wire and bars. Technical specifications

Professional Standard - Machinery, Trapezoidal screw

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Trapezoidal screw

German Institute for Standardization, Trapezoidal screw

  • DIN 5606-2:1975-03 Gauging of threads on workpieces for railway vehicles; round thread, acme thread, rounded acme thread
  • DIN 380-1:1985 Stub metric trapezoidal screw threads; thread profiles
  • DIN 103-1:1977 ISO Metric Trapezoidal Screw Thread; Profiles
  • DIN 76-3:1977-01 Runouts, Undercuts for Trapezoidal Threads, Buttress Threads and Knuckle Threads and other Threads of Coarse Pitch
  • DIN 103-3:1977 ISO Metric Trapezoidal Screw Thread; Allowances and Tolerances for Trapezoidal Screw Threads of General Purpose
  • DIN 103-3:1977-04 ISO Metric Trapezoidal Screw Thread; Allowances and Tolerances for Trapezoidal Screw Threads of General Purpose
  • DIN 30386:2007 Hexagonal nuts - Rounded acme thread
  • DIN 5606-2:1975 Gauging of threads on workpieces for railway vehicles; round thread, acme thread, rounded acme thread
  • DIN 30386:1976 Hexagonal nuts; rounded acme thread
  • DIN 103-2:1977 ISO Metric Trapezoidal Screw Thread; General Plan
  • DIN 380-1:1985-04 Stub metric trapezoidal screw threads; thread profiles
  • DIN 76-3:1977 Runouts, Undercuts for Trapezoidal Threads, Buttress Threads and Knuckle Threads and other Threads of Coarse Pitch
  • DIN 513-1:2020-12 Metric buttress threads - Part 1: Thread profiles
  • DIN 1893-1:1978 Disc type thread milling cutters for ISO metric trapezoidal threads; dimensions
  • DIN 103-1:1977-04 ISO Metric Trapezoidal Screw Thread; Profiles
  • DIN 380-2:1985 Stub metric trapezoidal screw threads; general plan
  • DIN 30295-1:1973-05 Rounded Trapezoidal Threads; Nominal Dimensions
  • DIN 30387:1976 Shouldered nuts; metric fine thread, rounded acme thread
  • DIN 30387:2007 Shouldered nuts - Metric fine thread, rounded acme thread
  • DIN 30387:2007-06 Shouldered nuts - Metric fine thread, rounded acme thread
  • DIN 103-4:1977 ISO Metric Trapezoidal Screw Thread; Nominal Dimensions
  • DIN 380-2:1985-04 Stub metric trapezoidal screw threads; general plan
  • DIN 103-2:1977-04 ISO Metric Trapezoidal Screw Thread; General Plan
  • DIN 103-4:1977-04 ISO Metric Trapezoidal Screw Thread; Nominal Dimensions
  • DIN 48351-2:1967 A-masts; bolts, nuts, washers
  • DIN 2510-6:2013-05 Bolted connections with waisted shank - Part 6: Cap nuts
  • DIN EN 14364:2013-05 Bolted connections with waisted shank - Part 6: Cap nuts
  • DIN 50018:2013-05 Bolted connections with waisted shank - Part 6: Cap nuts
  • DIN 65013:2013-05 Bolted connections with waisted shank - Part 6: Cap nuts
  • DIN 103-7:1972 ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Bolt Threads from 8 to 100 mm Nominal Diameter
  • DIN 103-5:1972 ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Nut Threads from 8 to 100 mm Nominal Diameter
  • DIN 103-6:1972 ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Nut Threads from 105 to 300 mm Nominal Diameter
  • DIN 513-2:2020-12 Metric buttress threads - Part 2: General plan
  • DIN 103-8:1972 ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Bolt Threads from 105 to 300 mm Nominal Diameter
  • DIN 513-3:2020-12 Metric buttress threads - Part 3: Deviations and tolerances
  • DIN 30295-1:1973 Rounded Trapezoidal Threads; Nominal Dimensions
  • DIN 20353:2016-03 Rock drilling - Trapezoidal thread connection for percussive drilling - Dimensions, design
  • DIN 6063-2:2004 Threads, mainly for plastic containers - Part 2: Trapezoidal screw threads, dimensions
  • DIN 1893-2:1990 Side and face thread milling cutters for ISO metric trapezoidal threads; technical delivery conditions
  • DIN 6063-2:2011-04 Threads, mainly for plastic containers - Part 2: Trapezoidal screw threads, dimensions
  • DIN 2781:1990-09 Machine tools; buttress thread 45°, single start, for hydraulic presses
  • DIN 6063-1:2011-04 Threads, mainly for plastic containers - Part 1: Buttress threads, dimensions
  • DIN 103-9:1985 ISO metric trapezoidal screw threads; gauging of external and internal threads; gauge dimensions and design features
  • DIN 103-8:1972-10 ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Bolt Threads from 105 to 300 mm Nominal Diameter
  • DIN 103-7:1972-10 ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Bolt Threads from 8 to 100 mm Nominal Diameter
  • DIN 103-5:1972-10 ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Nut Threads from 8 to 100 mm Nominal Diameter
  • DIN 103-9:1985-02 ISO metric trapezoidal screw threads; gauging of external and internal threads; gauge dimensions and design features
  • DIN 103-6:1972-10 ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Nut Threads from 105 to 300 mm Nominal Diameter
  • DIN 6063-2:2011 Threads, mainly for plastic containers - Part 2: Trapezoidal screw threads, dimensions
  • DIN 30389:1980 Hexagon and castle nuts with knuckle thread for motive power units turnbuckles and drawbars
  • DIN 55525:1988-11 Preferred threads, for plastic and glass containers with unified screw cap; buttress thread; dimensions
  • DIN 30295-2:1973-05 Rounded Trapezoidal Threads; Limiting Screw Thread Dimensions and Allowances; Permissible Deviations and Permissible Wear of Thread Gauges
  • DIN 30389:2007-06 Hexagon and castle nuts with knuckle thread - For motive power units turnbuckles and drawbars
  • DIN 263-3:2003-06 Single- and double-start acme thread with clearance for rail vehicles - Part 3: Thread gauges; Thread dimensions and permissible wear of thread gauge
  • DIN 30295-2:1973 Rounded Trapezoidal Threads; Limiting Screw Thread Dimensions and Allowances; Permissible Deviations and Permissible Wear of Thread Gauges
  • DIN 263-1:2000-03 Single- and double-start acme thread with clearance for rail vehicles - Part 1: Dimensions
  • DIN EN 3325:2008 Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PM1708 (FV 535) - Classification: 1 000 MPa/550 °C - Unplated; German and English version EN 3325:2007
  • DIN 4925-3:2014 Well screens and casings of unplasticized polyvinylchloride (PVC-U) for tube well - Part 3: DN 250 to DN 400 with trapezoidal thread
  • DIN 4925-2:2014 Well screens and casings of unplasticized polyvinylchloride (PVC-U) for tube wells - Part 2: DN 100 to DN 200 with trapezoidal thread
  • DIN 4925-2:1999 Well screens and casings of unplasticized polyvinylchloride (PVC-U) for tube wells - Part 2: DN 100 to DN 200 with trapezoidal thread
  • DIN 4925-3:1999 Well screens and casings of unplasticized polyvinylchloride (PVC-U) for tube well - Part 3: DN 250 to DN 400 with trapezoidal thread

RU-GOST R, Trapezoidal screw

  • GOST 14725-1969 Eye bolts with acme-thread. Design
  • GOST 19831-1974 Taps dies trapezoidal thread. Tolerances on thread
  • GOST 10071-1989 Gauges for trapezoidal tread. Tolerances
  • GOST 27298-1987 Gauges for multy-start trapezoidal thread. Tolerances
  • GOST 24739-1981 Basic norms of interchangeability. Trapezoidal multy-start screw thread
  • GOST 18788-1980 Extensions for shouldered screws. Design and dimensions
  • GOST 24737-1981 Basic norms of interchangeability. Trapezoidal single-start screw thread. Basic dimensions
  • GOST 24738-1981 Basic norms of interchangeability. Trapezoidal single-start screw thread. Diameters and pitches
  • GOST 18800-1980 Threaded rods for packs of disc springs. Design and dimensions
  • GOST 25575-2014 Gauges for trapezoidal thread connections for casing pipes with couplings. Types and basic dimensions
  • GOST 1486-1984 Square-head step-point with sphere set screws. Product grades A and B. Construction and dimensions
  • GOST 25575-1983 Gauges for trapezoidal thread connections for casing pipes with couplings. Types, basic dimensions and tolerances
  • GOST 1483-1984 Hexagon-head step-point with cone set screws. Product grades A and B. Construction and dimensions
  • GOST 25576-1983 Gauges for trapezaidal thread connections for tubing pipes with couplings. Types, basic dimensions and tolerances

IT-UNI, Trapezoidal screw

U.S. Military Regulations and Norms, Trapezoidal screw

VN-TCVN, Trapezoidal screw

  • TCVN 2255-2008 ISO metric trapezoidal screw threads.Tolerances
  • TCVN 4673-2008 ISO metric trapezoidal screw threads.Basic dimensions
  • TCVN 2254-2008 ISO metric trapezoidal screw threads.Basic profile and maximum material profiles

TH-TISI, Trapezoidal screw

  • TIS 2360-2007 Iso metric trapezoidal screw threads.general plan
  • TIS 2361-2007 Iso metric trapezoidal screw threads.tolerances
  • TIS 2362-2007 Iso metric trapezoidal screw threads.basic dimensions
  • TIS 2359-2007 Iso metric trapezoidal screw threads.basic profile and maximum material profiles

YU-JUS, Trapezoidal screw

  • JUS M.B0.060-1977 ISO Metric trapezoidal screw threads. Profiles
  • JUS M.B0.062-1977 ISO Metric trapezoidal screw threads. Basic sizes
  • JUS M.B0.270-1977 ISO Metric trapezoidal screw threads. System of tolerances
  • JUS M.B0.061-1977 ISO Metric trapezoidal screw threads. Diametar-pitch combinations and designation ofscrew threads
  • JUS M.B0.069-1989 Trapezoidal threads, for ?ore drilling eguipment. Dimensions and tolerances
  • JUS M.B0.514-1981 ISO Metric trapezoidal screw threads. Gauges for external and internat screw threads. Tolerances far thread gauges
  • JUS M.B0.271-1977 ISO Metric trapezoidal intemal screw threadsfrom 8 to 100 mm diameter; limits
  • JUS B.M2.140-1980 Support of mine opening. Roof bolts threa?ed. Shape and dimensions
  • JUS M.B0.272-1977 ISO Metric trapezoidal internat screw threads from 105 to 300 mm diameter; limits
  • JUS M.B0.273-1977 ISO Metric trapezoidal external screw threadsfrom 8 to 100 mm diameter; limits
  • JUS M.B0.274-1977 ISO Metric trapezoidal cxternal screw threadsfrom 105 to 300 mm diameter: limits
  • JUS M.B1.035-1979 ISO exterml metric trapezoidal screw threads, knuckle screw threads and other screw threads ofcoarse pitches. Runouts and undercuts
  • JUS M.B1.036-1979 SO internat trapezoidal screw threads, knuckle screw treads and other screw threa?s of coarse pitches. Runouts and undercuts

AT-ON, Trapezoidal screw

SE-SIS, Trapezoidal screw

Danish Standards Foundation, Trapezoidal screw

International Organization for Standardization (ISO), Trapezoidal screw

  • ISO 2903:1977 ISO metric trapezoidal screw threads — Tolerances
  • ISO 2903:2016 ISO metric trapezoidal screw threads - Tolerances
  • ISO 2903:1993 ISO metric trapezoidal screw threads; tolerances
  • ISO 10862:2009 Small craft - Quick release system for trapeze harness
  • ISO 2902:2016 ISO metric trapezoidal screw threads - General plan
  • ISO 2902:1977 ISO metric trapezoidal screw threads; General plan
  • ISO 2904:1977 ISO metric trapezoidal screw threads; Basic dimensions
  • ISO 2904:2020 ISO metric trapezoidal screw threads — Basic dimensions
  • ISO 2901:2016 ISO metric trapezoidal screw threads - Basic and design profiles
  • ISO 2901:1977 ISO metric trapezoidal screw threads — Basic profile and maximum material profiles
  • ISO 2901:1993 ISO metric trapezoidal screw threads; Basic profile and maximum material profiles

Society of Automotive Engineers (SAE), Trapezoidal screw

BELST, Trapezoidal screw

  • STB 1148-99 Screws with special buttress thread. Specifications

Indonesia Standards, Trapezoidal screw

  • SNI 05-2063-1990 Metric trapezoidal screw threads. Basic dimensions
  • SNI 05-2062-1990 Metric trapezoidal screw threads. Basic profile and maximum material profiles

国家市场监督管理总局、中国国家标准化管理委员会, Trapezoidal screw

KR-KS, Trapezoidal screw

IN-BIS, Trapezoidal screw

机械工业部, Trapezoidal screw

  • JB 2886-1992 Technical conditions for machine tool trapezoidal thread screws and nuts

GOSTR, Trapezoidal screw

  • GOST 9484-1981 Single trapezoidal thread. Profile. Basic dimensions
  • GOST 9562-1981 Basic norms of interchangeability. Trapezoidal single-start screw thread. Tolerances

KP-CSK, Trapezoidal screw

  • KPS 2063-2002 ISO metric trapezoidal screw threads-Basic dimensions

Defense Logistics Agency, Trapezoidal screw

Professional Standard - Aviation, Trapezoidal screw

CH-SNV, Trapezoidal screw

Professional Standard - Military and Civilian Products, Trapezoidal screw

  • WJ/Z 106-1979 Application size of trapezoidal thread gauge (D=10~150mm)
  • WJ 1160-1979 Thread gauge and technical conditions Trapezoidal thread ring gauge (D=10~100mm)
  • WJ 2171-1993 Specification for cylindrical helical springs of rectangular and trapezoidal cross section for weapons

Professional Standard - Coal, Trapezoidal screw

BR-ABNT, Trapezoidal screw

Aerospace Industries Association, Trapezoidal screw

  • AIA NASM27120-2001 Clevis, Rod End - Turnbuckle (General Purpose) FSC 5340
  • AIA NAS 359-1992 Tube Assembly - Control Steel with Welded Clevis and Threaded Rod Ends (Rev. 6)

ZA-SANS, Trapezoidal screw

  • SANS 1700-2-16:1996 Fasteners Part 2: Screw threads Section 16: ISO metric trapezoidal screw threads - Tolerances
  • SANS 1700-2-17:1996 Fasteners Part 2: Screw threads Section 17: ISO metric trapezoidal screw threads - Basic dimensions
  • SANS 1700-2-15:1996 Fasteners Part 2: Screw threads Section 15: ISO metric trapezoidal screw threads - General plan
  • SANS 1700-2-14:1996 Fasteners Part 2: Screw threads Section 14: ISO metric trapezoidal screw threads - Basic profile and maximum material profiles

United States Navy, Trapezoidal screw

Professional Standard - Aerospace, Trapezoidal screw

  • QJ 1000.21-1986 Machine tool fixture parts and components process card screw-in threaded bushing (for trapezoidal thread)
  • QJ 1000.19-1986 Machine tool fixture parts and components process card press-in threaded bushing (for trapezoidal thread)

Aerospace Industries Association/ANSI Aerospace Standards, Trapezoidal screw

  • AIA/NAS NAS 359-1992 Tube Assembly - Control Steel with Welded Clevis and Threaded Rod Ends (Rev. 6)
  • AIA/NAS NAS 362-1980 Tube Assembly - Control Steel with Flash Welded Clevis and Threaded Rod-Ends (Rev. 3)
  • AIA/NAS NAS356-2011 TUBE ASSEMBLY, CONTROL, ALUMINUM ALLOY, WITH RIVETED CLEVIS AND THREADED ROD ENDS (Rev 8)

AIA/NAS - Aerospace Industries Association of America Inc., Trapezoidal screw

  • NAS97-1946 Welded Assembly - Tube@ 3/8 O.D.@ Steel@ Clevis and Threaded Rod Ends (Rev 1)
  • NAS359-2016 TUBE ASSEMBLY@ CONTROL@ STEEL@ WITH WELDED CLEVIS AND THREADED ROD ENDS (Rev 8)
  • NAS359-2012 TUBE ASSEMBLY@ CONTROL@ STEEL@ WITH WELDED CLEVIS AND THREADED ROD ENDS (Rev 7)
  • NAS356-2011 TUBE ASSEMBLY@ CONTROL@ ALUMINUM ALLOY@ WITH RIVETED CLEVIS AND THREADED ROD ENDS (Rev 8)
  • NAS359-1973 TUBE ASSEMBLY - CONTROL STEEL WITH WELDED CLEVIS AND THREADED ROD ENDS (Rev 5)
  • NAS359-1992 Tube Assembly - Control Steel with Welded Clevis and Threaded Rod Ends (Rev 6)
  • NAS356-1991 Tube Assembly-Control Aluminum Alloy with Riveted Clevis and Threaded Rod Ends (Rev 6)
  • NAS362-1980 Tube Assembly - Control Steel with Flash Welded Clevis and Threaded Rod-Ends (Rev 3)

Military Standard of the People's Republic of China-General Armament Department, Trapezoidal screw

  • GJB 3517-1999 General Specification for Rectangular Electrical Connectors with Knife and Fork Type Contact Center Screw Connections

  Trapezoidal feeder, twin screw, screw, micro screw, Screwdriver, Screw machine, screw design, Trapezoidal screw, conical screw, screw machine, experimental screw, Trapezoidal, trapezoidal gradient, feed screw screw, Technical conditions for trapezoidal sleepers, Screw barrel, trapezoidal round thread, trapezoidal sleeper, trapezoidal thread, Trapezoidal screw.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved