ZH
RU
ES

Enthalpy of melting of plastic

Enthalpy of melting of plastic, Total:189 items.

In the international standard classification, Enthalpy of melting of plastic involves: Plastics, Rubber and plastics products, Thermodynamics and temperature measurements, Protection against dangerous goods, Physics. Chemistry, Products of the textile industry, Fuels, Surface treatment and coating, Protective equipment, Welding, brazing and soldering, Pipeline components and pipelines, Paint ingredients, Pharmaceutics, Testing of metals, Refractories, Construction materials, Petroleum, petroleum products and natural gas handling equipment, Waxes, bituminous materials and other petroleum products, Materials for aerospace construction.

British Standards Institution (BSI), Enthalpy of melting of plastic

BS EN ISO 11357-3:2013 Plastics. Differential scanning calorimetry (DSC). Determination of temperature and enthalpy of melting and crystallization
BS ISO 16790:2005 Plastics - Determination of drawing characteristics of thermoplastics in the molten state
20/30406605 DC BS ISO 16790. Plastics. Determination of drawing characteristics of thermoplastics in the molten state
BS ISO 16790:2021 Tracked Changes. Plastics. Determination of drawing characteristics of thermoplastics in the molten state
BS EN ISO 11357-3:2018 Tracked Changes. Plastics. Differential scanning calorimetry (DSC). Determination of temperature and enthalpy of melting and crystallization
BS EN ISO 3146:2022 Tracked Changes. Plastics. Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods
21/30427377 DC BS EN ISO 3146. Plastics. Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods
BS EN ISO 1133:1997 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
BS EN ISO 1133:2005 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
BS ISO 12176-1:2017 Tracked Changes. Plastics pipes and fittings. Equipment for fusion jointing polyethylene systems. Butt fusion
BS EN ISO 1133-1:2011 Plastics. Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics. Standard method
BS 2782-11 Method 1150E:1997 Methods of testing plastics - Thermoplastics pipes, fittings and valves - Plastics pipes and fittings - Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting
BS EN ISO 1133-2:2011 Plastics. Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics. Method for materials sensitive to time-temperature history and/or moisture
BS ISO 12176-2:2008 Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Electrofusion
BS EN 348:1992 Protective clothing - Determination of behaviour of materials on impact of small splashes of molten metal
BS EN ISO 1133-1:2022 Tracked Changes. Plastics. Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics. Standard method
BS ISO 12176-1:2012 Plastics pipes and fittings. Equipment for fusion jointing polyethylene systems. Butt fusion
BS ISO 12176-2:2008+A1:2021 Plastics pipes and fittings. Equipment for fusion jointing polyethylene systems - Electrofusion
BS ISO 11357-5:1999 Plastics - Differential scanning calorimetry (DSC) - Determination of characteristic reaction-curve temperatures and times, enthalphy of reaction and degree of conversion
BS ISO 11357-5:2001 Plastics - Differential scanning calorimetry (DSC) - Determination of characteristic reaction-curve temperatures and times, enthalphy of reaction and degree of conversion
BS PD CEN/TR 15404:2010 Solid recovered fuels — Methods for the determination of ash melting behaviour by using characteristic temperatures
BS ISO 23673:2021 Plastics. Elasticity index. Determination of elastic property of melts
BS ISO 11357-5:2013 Plastics. Differential scanning calorimetry (DSC). Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
BS EN ISO 11357-5:2014 Plastics. Differential scanning calorimetry (DSC). Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion

工业和信息化部, Enthalpy of melting of plastic

SH/T 1826-2019 Determination of melting enthalpy, crystallinity and melting temperature of plastic ultra-high molecular weight polyethylene (PE-UHMW) materials and products by differential scanning calorimetry (DSC)

Korean Agency for Technology and Standards (KATS), Enthalpy of melting of plastic

KS M ISO 11357-3:2018 Plastics — Differential scanning calorimetry(DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization
KS M ISO 3146-2012(2017) Plastics－Determination of melting behaviour(melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods
KS M ISO 11357-3:2013 Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization
KS M ISO 11357-3:2003 Plastics -Differential scanning calorimetry (DSC) -Part 3:Determination of temperature and enthalpy of melting and crystallization
KS M ISO 21404:2022 Solid biofuels — Determination of ash melting behaviour
KS K ISO 9185-2016(2021) Protective clothing－Assesment of resistance of materials to molten metal splash
KS E ISO 540-2002(2017) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
KS K ISO 9150-2012(2017) Protective clothing－Determination of behaviour of materials on impact of small splashes of molten metal
KS E ISO 540:2002 Solid mineral fuels－Determination of fusibility of ash－High－temperature tube method
KS M ISO 1133-1:2012 Plastics－Determination of the melt mass-flow rate(MFR) and melt volume-flow rate(MVR) of thermoplastics－Part 1：Standard method
KS M 3070-2013 Testing method for melt flow rate of thermoplastics
KS M ISO 1133-1-2012(2022) Plastics－Determination of the melt mass-flow rate(MFR) and melt volume-flow rate(MVR) of thermoplastics－Part 1：Standard method
KS K ISO 9150:2012 Protective clothing-Determination of behaviour of materials on impact of small splashes of molten metal
KS K ISO 9150-2012(2022) Protective clothing－Determination of behaviour of materials on impact of small splashes of molten metal
KS M ISO 1133-1-2012(2017) Plastics－Determination of the melt mass-flow rate(MFR) and melt volume-flow rate(MVR) of thermoplastics－Part 1：Standard method
KS F 2568-2011 Melt-solidified slag aggregate for concrete derived from municipal solid waste and sewage sludge
KS M 1133-2-2016 Plastics － Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics － Part 2: Method for materials sensitive to time-temperature history and/or moisture
KS M ISO 1133-2:2016 Plastics － Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics － Part 2: Method for materials sensitive to time-temperature history and/or moisture
KS F 2569-2017 Melt-solidified slag material for road construction derived from municipal solid waste and sewage sludge

KR-KS, Enthalpy of melting of plastic

KS M ISO 11357-3-2018 Plastics — Differential scanning calorimetry(DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization
KS M ISO 1133-2-2016 Plastics － Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics － Part 2: Method for materials sensitive to time-temperature history and/or moisture
KS M ISO 21404-2022 Solid biofuels — Determination of ash melting behaviour
KS K ISO 9185-2016 Protective clothing－Assesment of resistance of materials to molten metal splash

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Enthalpy of melting of plastic

GB/T 19466.3-2004 Plastics-Differential scanning calorimetry(DSC)-Part 3:Determination of temperature and enthalpy of melting and crystallization
GB/T 16582-2008 Plastics.Determination of melting behaviour (melting temperature of melting range)of semi-crystalline polymers by capillary tube and polarizing-microscope methods
GB/T 21783-2008 Plasties.Determination of melting behaviour (melting temperature or melting range)of semi-crystalline polymers by capillary tube and polarizing-microscope methods
GB/T 30726-2014 Determination of ash fusibility of solid biofuels
GB/T 18593-2001 Anti-corrosive painting of fusion bonded epoxy coating powders
GB/T 18593-2010 Anti-corrosive painting of fusion bonded epoxy coating powders
GB/T 3682-2000 Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics

CZ-CSN, Enthalpy of melting of plastic

CSN 64 0861-1979 Plastios. Determination of melt flow index of thermoplastics
CSN ISO 3146:1992 Plastics. Detennination of melting bahaviour (melting temperatuie o? melting range) of semi-crystalline polymers.

SE-SIS, Enthalpy of melting of plastic

SIS SS-ISO 3146:1987 Plastics - Determination of the melting behaviour (melting tern perature or melting range) of semi-crystalline polymers
SIS SS 16 11 47-1983 Plastics - Determination of the melt flow rate of thermoplastics
SIS SS 18 71 65-1984 Solid mineral fuels - Determination of fusibility of ash - High- temperature tube method

Association Francaise de Normalisation, Enthalpy of melting of plastic

NF T51-507-3:2013 Plastics - Differential scanning calorimetry (DSC) - Part 3: determination of temperature and enthalpy of melting and crystallization
NF T51-566:2006 Plastics - Determination of drawing characteristics of thermoplastics in the molten state.
NF EN ISO 3146:2022 Plastiques - Détermination du comportement à la fusion (température de fusion ou plage de températures de fusion) des polymères semi-cristallins par méthodes du tube capillaire et du microscope polarisant
NF T51-507-3*NF EN ISO 11357-3:2018 Plastics - Differential scanning calorimetry (DSC) - Part 3 : determination of temperature and enthalpy of melting and crystallization
NF T51-560:1990 Plastics. Determination of the rheological characteristics in the molten state. Capillaru rheometer method.
NF EN ISO 9185:2007 Vêtements de protection - Évaluation de la résistance des matériaux aux projections de métal fondu
NF T51-621:1997 PLASTICS. DETERMINATION OF MELTING BEHAVIOUR (MELTING TEMPERATURE OR MELTING RANGE) OF SEMI-CRYSTALLINE POLYMERS. (EUROPEAN STANDARD EN ISO 3146).
NF EN 761:1994 Systèmes de canalisations plastiques - Tubes plastiques thermodurcissables renforcés de verre (PRV) - Détermination du coefficient de fluage en condition sèche.
NF T65-002*NF EN 15322:2013 Bitumen and bituminous binders - Framework for specifying cut-back and fluxed bituminous binders

American Society for Testing and Materials (ASTM), Enthalpy of melting of plastic

ASTM F3091/F3091M-14 Standard Specification for Powder Bed Fusion of Plastic Materials
ASTM E793-95 Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
ASTM E793-06(2018) Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
ASTM F2625-10(2016) Standard Test Method for Measurement of Enthalpy of Fusion, Percent Crystallinity, and Melting Point of Ultra-High-Molecular Weight Polyethylene by Means of Differential Scanning Calorimetry
ASTM D2839-02 Standard Practice for Use of a Melt Index Strand for Determining Density of Polyethylene
ASTM D2839-96 Standard Test Method for Use of a Melt Index Strand for Determining Density of Polyethylene
ASTM F3091/F3091M-14(2021) Standard Specification for Powder Bed Fusion of Plastic Materials
ASTM E953-88(2004) Standard Test Method for Fusibility of Refuse-Derived Fuel (RDF) Ash
ASTM C374-14(2018) Standard Test Methods for Fusion Flow of Porcelain Enamel Frits (Flow-Button Methods)
ASTM C621-84(2001) Standard Test Method for Isothermal Corrosion Resistance of Refractories to Molten Glass
ASTM C621-09 Standard Test Method for Isothermal Corrosion Resistance of Refractories to Molten Glass
ASTM C1223-09(2018) Standard Test Method for Testing of Glass Exudation from AZS Fusion-Cast Refractories
ASTM C1223-92(1998) Standard Test Method for Testing of Glass Exudation from AZS Fusion-Cast Refractories
ASTM C1223-19 Standard Test Method for Testing of Glass Exudation from AZS Fusion-Cast Refractories
ASTM C1223-09(2014) Standard Test Method for Testing of Glass Exudation from AZS Fusion-Cast Refractories
ASTM C621-09(2014) Standard Test Method for Isothermal Corrosion Resistance of Refractories to Molten Glass
ASTM D3261-10 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
ASTM F1733-20 Standard Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing
ASTM D3261-16 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
ASTM C621-84(1989)e1 Standard Test Method for Isothermal Corrosion Resistance of Refractories to Molten Glass
ASTM C621-09(2022) Standard Test Method for Isothermal Corrosion Resistance of Refractories to Molten Glass
ASTM C621-09(2018) Standard Test Method for Isothermal Corrosion Resistance of Refractories to Molten Glass
ASTM C621-84(1995) Standard Test Method for Isothermal Corrosion Resistance of Refractories to Molten Glass
ASTM F1733-96 Standard Specification for Butt heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing
ASTM F1733-96(2002) Standard Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing
ASTM F1733-96e1 Standard Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing
ASTM D1238-04 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
ASTM D1238-04a Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
ASTM D1238-04c Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
ASTM D1238-01e1 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
ASTM D1238-00 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
ASTM F734-95 Standard Test Method for Shear Strength of Fusion Bonded Polycarbonate Aerospace Glazing Material
ASTM F734-17 Standard Test Method for Shear Strength of Fusion Bonded Polycarbonate Aerospace Glazing Material
ASTM D1238-20 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer

International Organization for Standardization (ISO), Enthalpy of melting of plastic

ISO 16790:2005 Plastics - Determination of drawing characteristics of thermoplastics in the molten state
ISO 16790:2021 Plastics - Determination of drawing characteristics of thermoplastics in the molten state
ISO 11357-3:2011 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
ISO 11357-3:1999 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
ISO 11357-3:2018 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
ISO 3146:1974 Plastics — Determination of melting temperature of semi-crystalline polymers — Optical method
ISO 11357-3:1999/Amd 1:2005 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization; Amendment 1
ISO 6451:1982 Plastics coated fabrics; Polyvinyl chloride coatings; Rapid method for checking fusion
ISO 1133:1991 Plastics; determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
ISO 1133:1981 Plastics — Determination of the melt flow rate of thermoplastics
ISO 1133:2005 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
ISO 1133:2005/Cor 1:2006 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics; Technical Corrigendum 1
ISO 1218:1975 Plastics; Polyamides; Determination of "melting point"
ISO 1133:1997 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
ISO 540:1981 Solid mineral fuels; Determination of fusibility of ash; High-temperature tube method
ISO/CD 9185:2023 Protective clothing — Assessment of resistance of materials to molten metal splash
ISO 1133-1:2022 Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics — Part 1: Standard method
ISO 3146:1985 Plastics; Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers
ISO 540:1995 Solid mineral fuels - Determination of fusibility of ash - High-temperature tube method
ISO 1133-1:2011 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method
ISO 23673:2021 Plastics — Elasticity index — Determination of elastic property of melts

GM Europe, Enthalpy of melting of plastic

GME QK 000185-1983 Polycarbonat - Formmasse niederer Schmelzviskosit鋞 Polycarbonate - Moulding Compound Low Melting Viscosity German

Group Standards of the People's Republic of China, Enthalpy of melting of plastic

T/CSIQ 72003-2020 Rigid PVC pipes—Measurement of enthalpy of fusion of crystallites—Differential scanning calorimetry (DSC) method
T/CSBM 0035-2023 Melt derived borosilicate bioactive glass raw materials
T/CSTM 00753-2023 Metallic materials—Determination of argon content—Inert gas fusion mass spectrometric method

ES-UNE, Enthalpy of melting of plastic

UNE-EN ISO 3146:2022 Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods (ISO 3146:2022)
UNE-EN ISO 11357-3:2018 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization (ISO 11357-3:2018)
UNE-EN ISO 1133-1:2023 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2022)

German Institute for Standardization, Enthalpy of melting of plastic

DIN EN ISO 3146:2022-06 Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods (ISO 3146:2022); German version EN ISO 3146:2022
DIN 54811:1984 Testing of plastics; determining the fluidity of plastics melts by the capillary rheometer
DIN EN ISO 11357-3:2018 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization (ISO 11357-3:2018)
DIN EN ISO 11357-3:2018-07 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization (ISO 11357-3:2018); German version EN ISO 11357-3:2018
DIN EN ISO 11357-3:2013 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization (ISO 11357-3:2011); German version EN ISO 11357-3:2013
DIN 53736:1973 Testing of plastics; determination of the melt temperature of semicristalline plastics
DIN EN ISO 9185:2007-09 Protective clothing - Assessment of resistance of materials to molten metal splash (ISO 9185:2007); German version EN ISO 9185:2007
DIN EN ISO 1133-1:2022-10 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2022); German version EN ISO 1133-1:2022

European Committee for Standardization (CEN), Enthalpy of melting of plastic

EN ISO 11357-3:2018 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
EN ISO 11357-3:2013 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
prEN 373-1992 Protective clothing; assessment of resistance of materials to molten metal splash
EN 373:1993 Protective Clothing - Assessment of Resistance of Materials to Molten Metal Splash
prEN ISO 9185 rev Protective clothing - Assessment of resistance of materials to molten metal splash
EN ISO 1133-1:2022 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2022)
EN ISO 1133-1:2011 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011)

Danish Standards Foundation, Enthalpy of melting of plastic

DS/EN ISO 11357-3:2013 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
DS/ISO 1133:1985 Plastics. Determination of the flow rate of thermoplastics
DS/EN ISO 9185:2007 Protective clothing - Assessment of resistance of materials to molten metal splash
DS/ISO 540:1980 Coal and coke. Determination of fusibility of ash
DS/EN ISO 1133-1:2012 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method
DS/EN ISO 1133-2:2012 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture
DS 2383:1997 Fusion of sheet, pipes and tanks in plastics - Certification of welders
DS/INF 70-6:2010 Plastics pipes - Butt fusion of polyolefine pipe systems - Inspection of butt fusion equipment

国家市场监督管理总局、中国国家标准化管理委员会, Enthalpy of melting of plastic

GB/T 37463-2019 Additive manufacturing—Specification for powder bed fusion of plastic materials
GB/T 38976-2020 Test method for the oxygen concentration in silicon materials—Inert gas fusion infrared detection method

AENOR, Enthalpy of melting of plastic

UNE-EN ISO 11357-3:2013 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization (ISO 11357-3:2011)
UNE-EN ISO 9185:2008 Protective clothing - Assessment of resistance of materials to molten metal splash (ISO 9185:2007)
UNE-EN ISO 1133-1:2012 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011)

Japanese Industrial Standards Committee (JISC), Enthalpy of melting of plastic

JIS K 7210:1999 Plastics -- Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
JIS K 6718-2:2000 Plastics -- Poly (methyl methacrylate) sheets -- Types, dimensions and characteristics -- Part 2: Melt-calendered extruded sheets
JIS T 8026:2018 Protective clothing -- Assessment of resistance of materials to molten metal splash
JIS K 7210-1:2014 Plastics.Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics.Part 1: Standard method

BE-NBN, Enthalpy of melting of plastic

NBN T 40-101-1988 Plastics - Determination of the melt flow rate of thermoplastics

RO-ASRO, Enthalpy of melting of plastic

STAS 9047-1971 PLASTICS Determination of the melt flow rate of thermoplastics

CEN - European Committee for Standardization, Enthalpy of melting of plastic

EN ISO 1133:2005 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
EN ISO 1133:1999 Plastics - Determination of the Melt Mass-Flow Rate (MFR) and the Melt Volume-Flow Rate (MVR) of Thermoplastics

YU-JUS, Enthalpy of melting of plastic

JUS G.S2.601-1991 Plastics.Determaination of the melt flow rate of thermoplastic

NL-NEN, Enthalpy of melting of plastic

NEN-EN 373-1993 Protective clothing. Assessment of resistance of materials to molten metal splash

PL-PKN, Enthalpy of melting of plastic

PN C89069-1993 Plastics. Determination of the melt massflow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
PN C89425-1992 Plastics. Determination of melting temperature of semi-crystalline polymers

RU-GOST R, Enthalpy of melting of plastic

GOST R ISO 12176-1-2011 Plastics pipes and fittings. Equipment for fusion jointing polyethylene systems. Part 1. Butt fusion
GOST R ISO 12176-1-2021 Plastics pipes and fittings. Equipment for fusion jointing polyethylene systems. Part 1. Butt fusion
GOST R 56724-2015 Plastics. Differential scanning calorimetry (DSC). Part 3. Determination of temperature and enthalpy of melting and crystallization
GOST R 55118-2012 Solid recovered fuels. Methods for the determination of ash melting behaviour by using characteristic temperatures

未注明发布机构, Enthalpy of melting of plastic

DIN EN ISO 1133:2005 Plastics – Determination of melt mass flow rate (MFR) and melt volume flow rate (MVR) of thermoplastics
BS EN 373:1993(1999) Protective clothing — Assessment of resistance of materials to molten metal splash

VN-TCVN, Enthalpy of melting of plastic

TCVN 6693-2000 Protective clothing.Determination of behaviour of materials on impact of small splashes of molten metal

Professional Standard - Chemical Industry, Enthalpy of melting of plastic

HG/T 4768.5-2014 Pigments and extenders.Assessment of dispersibility in plastics.Part 5: Determination of colouring materials dispersion by heating and melting

ZA-SANS, Enthalpy of melting of plastic

SANS 1133:2008 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
SANS 1133:1997 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
SANS 43:1995 Solid mineral fuels - Determination of fusibility of ash - High-temperature tube method
SANS 10268-2:2004 Welding of thermoplastics - Welding processes Part 2: Electrofusion welding

(U.S.) Ford Automotive Standards, Enthalpy of melting of plastic

FORD FLTM BO 021-02-2001 MELTING POINT DETERMINATION OF PLASTICS FISHER-JOHNS METHOD

IN-BIS, Enthalpy of melting of plastic

IS 8687 Pt.2-1977

Lithuanian Standards Office , Enthalpy of melting of plastic

LST EN ISO 9185:2007 Protective clothing - Assessment of resistance of materials to molten metal splash (ISO 9185:2007)
LST EN ISO 1133-1:2012 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Enthalpy of melting of plastic

GB/T 3682.1-2018 Plastics—Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics—Part 1:Standard method

American Society of Mechanical Engineers (ASME), Enthalpy of melting of plastic

ASME QF-485-2013 Suggested Format for Plastic Pipe Fusing Data Acquisition Log Review