ZH
RU
ES

plastic thermal desorption

plastic thermal desorption, Total:500 items.

In the international standard classification, plastic thermal desorption involves: Equipment for the chemical industry, Paints and varnishes, Aircraft and space vehicles in general, Wastes, Fluid storage devices, Iron and steel products, Cellular materials, Plastics, Air quality, Environmental protection, Vocabularies, Rubber, Rubber and plastics products, Installations in buildings, Pipeline components and pipelines, Raw materials for rubber and plastics, Valves, Adhesives, Surface treatment and coating, Farm buildings, structures and installations, Processes in the food industry, Construction materials, Welding, brazing and soldering, Miscellaneous domestic and commercial equipment, Reinforced plastics, Bottles. Pots. Jars, Equipment for the rubber and plastics industries, Road engineering, Shipbuilding and marine structures in general, Company organization and management, Farming and forestry, Fasteners, Insulating fluids, Analytical chemistry, Interior finishing, Medical equipment, Fruits. Vegetables, Protection of and in buildings, Products of the textile industry, Standardization. General rules, Road vehicles in general, Agricultural machines, implements and equipment, Bearings.

Group Standards of the People's Republic of China, plastic thermal desorption

T/NDAS 26-2020 Technical requirements for in situ thermal desorption
T/QGCML 1569-2023 Direct thermal desorption waste heat recovery system for contaminated soil
T/CAEPI 54-2023 Design guide of ex-situ direct thermal desorption system for contaminated soil remediation
T/CAEPI 57-2023 Technical guideline for installation, operation and maintenance of direct thermal desorption equipment for contaminated soil remediation
T/SGX 018-2023 Recycled Plastics—Thermoplastic cross-linked polyethylene from cable for wood-plastic composites
T/GDPIA 66-2023 Recycled Plastics—Thermoplastic cross-linked polyethylene from cable for wood-plastic composites

RU-GOST R, plastic thermal desorption

GOST 32299-2013 Paint materials. Pull-off test for adhesion
GOST 22643-1987 Plastic valves. Main parameters
GOST 11645-1973 Plastics. Determination of flow index of thermoplastics melt by extrusion plastometer
GOST 10456-1980 Plastics. Method for determination of incandescence resistance
GOST 12015-1966 Plastics. Preparation of test specimens from thermosetts. General requirements
GOST 12019-1966 Plastics. Preparation of test speciments from thermoplastics. General conditions
GOST 15088-2014 Plastics. Method for determination of Vicat softening temperature of thermoplastics
GOST 23630.1-1979 Plastics. Method for the determination of thermal capacity
GOST R ISO 306-2012 Plastics. Thermoplastic materials. Determination of Vicat softening temperature
GOST R ISO 580-2008 Plastics piping systems. Injection-moulded thermoplastics fittings. Methods for determination of fittings appearance alteration after heating
GOST 23630.2-1979 Plastics. Method for the determination of thermal conductivity
GOST 27319-1987 Thermoplastic materials. Method of determination of thermal bonding strength
GOST ISO 4065-2005 Thermoplastics pipes. Universal wall thickness table

Military Standards (MIL-STD), plastic thermal desorption

DOD A-A-53841-1989 PAIL, PLASTIC 14 QUART CAPACITY

American Society of Mechanical Engineers (ASME), plastic thermal desorption

ASME RTP-1b Addenda-1997 Reinforced thermoset plastic corrosion resistant equipment; Addenda
ASME RTP-1a Addenda-1993 Reinforced thermoset plastic corrosion resistant equipment; Addenda
ASME RTP-1b Addenda-1994 Reinforced thermoset plastic corrosion resistant equipment; Addenda
ASME RTP-1d Addenda-2004 Reinforced thermoset plastic corrosion resistant equipment; Addenda
ASME RTP-1a Errata-1994 Reinforced thermoset plastic corrosion resistant equipment; Addenda; Errata

Professional Standard - Aerospace, plastic thermal desorption

QJ 878.1-1984 Plastic Extrusion Mold Stripping Plate
QJ 878.2-1984 Plastic Extrusion Mold Stripping Plate

International Organization for Standardization (ISO), plastic thermal desorption

ISO 4898:1984/Add 1:1988 Cellular plastics — Specification for rigid cellular materials used in the thermal insulation of buildings — Addendum 1: Phenol-formaldehyde cellular plastics (RC/PF)
ISO 294:1975 Plastics; Injection moulding test specimens of thermoplastic materials
ISO 294:1995 Plastics - Injection moulding of test specimens of thermoplastic materials
ISO 293:2004 Plastics - Compression moulding of test specimens of thermoplastic materials
ISO 293:1986 Plastics; Compression moulding test specimens of thermoplastic materials
ISO 293:2023 Plastics — Compression moulding of test specimens of thermoplastic materials
ISO 4898:1984/Add 2:1988 Cellular plastics — Specification for rigid cellular materials used in the thermal insulation of buildings — Addendum 2: Labelling and marking of products
ISO 23559:2011 Plastics - Film and sheeting - Guidance on the testing of thermoplastic films
ISO 293:1974 Plastics — Compression moulding test specimens of thermoplastic materials
ISO 194:1981/Add 4:1981 Plastics — List of equivalent terms — Addendum 4
ISO 194:1981/Add 1:1983 Plastics — List of equivalent terms — Addendum 1
ISO 194:1981/Add 2:1983 Plastics — List of equivalent terms — Addendum 2
ISO 1133:1981 Plastics — Determination of the melt flow rate of thermoplastics
ISO 306:1987 Plastics; Thermoplastic materials; Determination of Vicat softening temperature
ISO 306:1974 Plastics — Determination of the Vicat softening temperature of thermoplastics
ISO 23327:2021 Hygrothermal performance of building materials and products - Determination of moisture adsorption/desorption properties in response to periodic temperature variation
ISO 295:2004 Plastics - Compression moulding of test specimens of thermosetting materials
ISO 2577:1984 Plastics; Thermosetting moulding materials; Determination of shrinkage
ISO 295:1974 Plastics; Compression moulding test specimens of thermosetting materials
ISO 295:1991 Plastics; compression moulding of test specimens of thermosetting materials
ISO 472:2013/Amd 1:2018 Plastics — Vocabulary — Amendment 1: Additional items
ISO 13968:2008 Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility
ISO 7349:1983 Thermoplastics valves; Connection references
ISO 8328:1989 Plastics; amorphous thermoplastic moulding materials; determination of maximum reversion
ISO 10508:1995 Thermoplastics pipes and fittings for hot and cold water systems
ISO 2577:2007 Plastics - Thermosetting moulding materials - Determination of shrinkage
ISO 16790:2005 Plastics - Determination of drawing characteristics of thermoplastics in the molten state
ISO 16790:2021 Plastics - Determination of drawing characteristics of thermoplastics in the molten state
ISO 4065:1978 Thermoplastic pipes; Universal wall thickness table
ISO 7808:1992 Plastics; thermosetting moulding materials; determination of transfer flow
ISO 306:1994 Plastics - Thermoplastic materials - Determination of Vicat Softening Temperature (VST)
ISO 294-3:2002 Plastics - Injection moulding of test specimens of thermoplastics materials - Part 3: Small plates
ISO 294-4:2001 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage
ISO 3994:2007 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification (Fourth Edition)
ISO 3994:2014 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification
ISO 306:2022 Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST)
ISO/CD 12219-11 Interior air of road vehicles — Part 11: Thermal desorption analysis of organic emissions for the characterization of non-metallic material for vehicles
ISO 13967:2009 Thermoplastics fittings - Determination of ring stiffness
ISO 13967:1998 Thermoplastics fittings - Determination of ring stiffness
ISO 9967:1994 Thermoplastics pipes; determination of creep ratio
ISO 9969:1994 Thermoplastics pipes; determination of ring stiffness
ISO 9969:2007 Thermoplastics pipes - Determination of ring stiffness
ISO 8233:1988 Thermoplastics valves; torque; test method
ISO 4065:1996 Thermoplastic pipes - Universal wall thickness table
ISO/DIS 8233 Thermoplastics valves — Torque — Test method
ISO 4065:2018 Thermoplastics pipes - Universal wall thickness table
ISO/FDIS 8233:2023 Thermoplastics valves — Torque — Test method

ES-UNE, plastic thermal desorption

UNE-ISO 36:2016 Rubber, vulcanized or thermoplastic. Determination of adhesion to textiles fabrics
UNE-EN 1871:2021 Road marking materials - Paint, thermoplastic and cold plastic materials - Physical properties
UNE-EN 13067:2021 Plastics welding personnel - Qualification of welders - Thermoplastics welded assemblies
UNE-EN ISO 472:2015/A1:2019 Plastics - Vocabulary - Amendment 1: Additional items (ISO 472:2013/Amd 1:2018)
UNE-EN ISO 9969:2016 Thermoplastics pipes - Determination of ring stiffness (ISO 9969:2016)
UNE-EN ISO 294-3:2021 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2020)
UNE-EN 13207:2018 Plastics - Thermoplastic silage films and tubes for use in agriculture
UNE-EN ISO 306:2023 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2022)
UNE-ISO 1827:2021 Rubber, vulcanized or thermplastic. Determination of shear modulus and adhesion to rigid plates. Quadruple-shear methods.
UNE-EN ISO 9967:2016 Thermoplastics pipes - Determination of creep ratio (ISO 9967:2016)

German Institute for Standardization, plastic thermal desorption

DIN 53381-1:1983 Testing of plastics; determination of thermostability of polyvinyl chloride (PVC); dehydrochlorination methods
DIN 54802-2:2015-07 Testing of plastics - Determination of plasticizer sorption and rate of plasticizer sorption in the heat of vinyl chloride (VC) polymers - Part 2: Statical method
DIN 16986:1987 Thermoplastics flat bars; dimensions
DIN 54802-1:2015-07 Testing of plastics - Determination of plasticizer sorption and rate of plasticizer sorption in the heat of vinyl chloride (VC) polymers - Part 1: Planetary mixer method
DIN 35230:2016-09 Plastics - Welding of thermoplastics - Specification of welding procedures; German version CEN/TS 16892:2015
DIN 53498:1967 Testing of Plastics; Heat Storage of Compression Mouldings Made of Thermosetting Compression Moulding Materials
DIN 16780-1:1988 Plastic moulding materials; thermoplastic moulding materials of polymeric blends; classification and designation
DIN EN ISO 295:2004 Plastics - Compression moulding of test specimens of thermosetting materials (ISO 295:2004); German version EN ISO 295:2004
DIN EN ISO 293:2005 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2004); English version of DIN EN ISO 293
DIN EN ISO 16135 Berichtigung 1:2008 Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006); German version EN ISO 16135:2006, Corrigenda to DIN EN ISO 16135:2006-06
DIN EN ISO 3994:2015-11 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification (ISO 3994:2014); German version EN ISO 3994:2014
DIN EN 13655:2003 Plastics - Mulching thermoplastic films for use in agriculture and horticulture; German version EN 13655:2002
DIN EN 13207:2001 Silage thermoplastic films; German version EN 13207:2001
DIN EN 1871:2020-12 Road marking materials - Paint, thermoplastic and cold plastic materials - Physical properties; German version EN 1871:2020
DIN EN ISO 16138 Berichtigung 1:2008 Industrial valves - Diaphragm valves of thermoplastics materials (ISO 16138:2006); German version EN ISO 16138:2006, Corrigenda to DIN EN ISO 16138:2006-06
DIN EN 13067:2019 Plastics welding personnel - Qualification of welders - Thermoplastics welded assemblies; German and English version prEN 13067:2019
DIN EN 13067:2020-11 Plastics welding personnel - Qualification of welders - Thermoplastics welded assemblies; German version EN 13067:2020
DIN EN ISO 472/A1:2019-03 Plastics - Vocabulary - Amendment 1: Additional items (ISO 472:2013/Amd.1:2018); Trilingual version EN ISO 472:2013/A1:2018
DIN EN ISO 9967:2008 Thermoplastics pipes - Determination of creep ratio (ISO 9967:2007); English version of DIN EN ISO 9967:2008-02
DIN EN ISO 9969:2016-06 Thermoplastics pipes - Determination of ring stiffness (ISO 9969:2016); German version EN ISO 9969:2016
DIN EN ISO 293:2023-06 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2023); German version EN ISO 293:2023
DIN EN ISO 294-3:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2002); German version EN ISO 294-3:2003
DIN EN 15860:2018 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
DIN 7742-1:1988 Plastic moulding materials; cellulose ester(CA, CP, CAB) thermoplastic moulding materials; classification and designation
DIN EN ISO 580:2005-05 Plastics piping and ducting systems - Injection-moulded thermoplastics fittings - Methods for visually assessing the effects of heating (ISO 580:2005); German version EN ISO 580:2005
DIN EN ISO 7808:1998 Plastics - Thermosetting moulding materials - Determination of transfer flow (ISO 7808:1992); German version EN ISO 7808:1998
DIN EN 13207:2018-05 Plastics - Thermoplastic silage films and tubes for use in agriculture; German version EN 13207:2018
DIN EN 1119:2009-07 Plastics piping systems - Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods for leaktightness and resistance to damage of non-thrust resistant flexible joints with elastomeric sealing elements; German version EN...
DIN EN 12943:1999-12 Filler materials for thermoplastics - Scope, designation, requirements, tests; German version EN 12943:1999
DIN EN ISO 9969:2008 Thermoplastics pipes - Determination of ring stiffness (ISO 9969:2007); English version of DIN EN ISO 9969:2008-03
DIN 16960-1:1974 Welding of Thermoplastics; Principles
DIN EN ISO 8233:2023-02 Thermoplastics valves - Torque - Test method (ISO/DIS 8233:2023); German and English version prEN ISO 8233:2023 / Note: Date of issue 2023-01-06*Intended as replacement for DIN EN 28233 (1991-06).
DIN EN ISO 9967:2016-07 Thermoplastics pipes - Determination of creep ratio (ISO 9967:2016); German version EN ISO 9967:2016
DIN EN ISO 13967:2010-04 Thermoplastics fittings - Determination of ring stiffness (ISO 13967:2009); German version EN ISO 13967:2009

United States Navy, plastic thermal desorption

NAVY QPL-24519-31 NOTICE 1-2008 Molding Plastics, Electrical, Thermoplastic
NAVY QPL-24519-2010 MOLDING PLASTICS, ELECTRICAL, THERMOPLASTIC
NAVY QPL-24519-2013 MOLDING PLASTICS, ELECTRICAL, THERMOPLASTIC
NAVY QPL-24519-31-2005 MOLDING PLASTICS, ELECTRICAL, THERMOPLASTIC
NAVY QPL-24519-QPD-2010 Molding Plastics, Electrical, Thermoplastic
NAVY MIL-PRF-5425 E-1998 PLASTIC SHEET, ACRYLIC, HEAT RESISTANT

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, plastic thermal desorption

GB/T 9352-2008 Plastic.Compression moulding of test specimens of thermoplastic materials
GB/T 5471-2008 Plastic.Compression moulding of test specimens of thermosetting materials
GB/T 27725-2011 Butterfly valves of thermoplastics materials
GB/T 28494-2012 Globe valves of thermoplastics materials
GB/T 9352-1988 Plastics--Compression moulding test specimens of thermoplastic materials
GB/T 17037.3-2003 Plastics--Injection moulding of test specimens of thermoplastic materials--Part 3: Small plates
GB/T 18991-2003 Thermoplastics pipes and fittings for hot and cold water systems
GB/T 39695-2020 Identification of volatile components of rubber fumes—Thermodesorption and gas chromatographic method with mass spectrometric detection
GB/T 17037.4-2003 Plastic--Injection moulding of test specimens of thermoplastic materials--Part 4: Determination of moulding shrinkage
GB/T 10798-2001 Table of universal wall thickness of thermoplastics pipe
GB/T 10798-2001(XG1-2003) Table of universal wall thickness of thermoplastics pipe
GB/T 10801.1-2002 Moulded polystyrene foam board for thermal insulation
GB/T 9647-2015 Determination of Ring Stiffness of Thermoplastic Pipes
GB/T 9647-2003 Thermoplastics pipes--Determination of ring stiffness

Professional Standard - Environmental Protection, plastic thermal desorption

HJ 583-2010 Ambient air.Determination of benzene and its analogies using sorbent adsorption thermal desorption and gas chromatography
HJ 1165-2021 Technical specification for contaminated soil remediation engineering in situ thermal desorption
HJ 1164-2021 Technical specification for contaminated soil remediation engineering ex situ thermal desorption
HJ 644-2013 Ambient air.Determination of volatile organic compounds.Sorbent adsorption and thermal desorption/gas chromatography mass spectrometry method
HJ 734-2014 Stationary source emission.Determination of volatile organic compounds.Sorbent adsorption and thermal desorption gas chromatography mass spectrometry method

(U.S.) Ford Automotive Standards, plastic thermal desorption

FORD S-M3G4602-A-1994 SELF ADHERING PLASTIC SHEET
FORD ESA-M4D433-A2-1985 THERMOPLASTIC POLYOLEFIN ELASTOMER, BLOW MOLDING COMPOUND
FORD ESH-M4D415-A1-1992 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), BLOW MOLDING COMPOUND
FORD WD 954-2012 Material and Performance Requirements for Screws Used in Thermoplastics Materials
FORD WD954-2015 Material and Performance Requirements for Screws Used in Thermoplastics Materials

FI-SFS, plastic thermal desorption

SFS 4238 E-1979 In the event of any differences in interpretation of this standard the Finnish version shall take precedence over this translation.
SFS 4386-1979
SFS-ISO 2577 E:1986 This standard is approved in English
SFS 3257-1976 MUOVIT. KESTOMUOVISET RUISKUPURISTETUT KOEKAPPALEET

British Standards Institution (BSI), plastic thermal desorption

23/30456705 DC BS ISO 813-2. Rubber, vulcanized or thermoplastic. Determination of adhesion to a rigid substrate - Part 2. Adhesion of a soft thermoplastic elastomer layer
BS EN ISO 293:2006 Plastics - Compression moulding of test specimens of thermoplastic materials
BS ISO 814:2017 Tracked Changes. Rubber, vulcanized or thermoplastic. Determination of adhesion to metal. Two-plate method
BS ISO 6505:2021 Tracked Changes. Rubber, vulcanized or thermoplastic. Determination of tendency to adhere to and corrode metals
BS EN 12295:2000 Plastics piping systems. Thermoplastics pipes and associated fittings for hot and cold water. Test method for resistance of joints to pressure cycling
BS PD CEN/TS 16892:2015 Plastics. Welding of thermoplastics. Specification of welding procedures
BS ISO 4065:1997 Thermoplastics pipes - Universal wall thickness table
BS EN ISO 7808:1993 Plastics. Thermosetting moulding materials. Determination of transfer flow
BS EN ISO 294-3:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Small plates
BS 6728-2:1993 Thermoplastics hot water bottles - Specification for hot water bottles manufactured from polyolefin materials
BS EN ISO 295:2004 Plastics - Compression moulding of test specimens of thermosetting materials
BS ISO 813:2019 Tracked Changes. Rubber, vulcanized or thermoplastic. Determination of adhesion to a rigid substrate. 90° peel method
BS EN 13655:2002 Plastics. Mulching thermoplastic films for use in agriculture and horticulture
BS EN 13677-1:2003 Reinforced thermoplastic moulding compounds - Specification for GMT - Designation
BS EN 13655:2018 Plastics. Mulching thermoplastic films for use in agriculture and horticulture
BS ISO 16790:2005 Plastics - Determination of drawing characteristics of thermoplastics in the molten state
BS EN ISO 22007-1:2012 Plastics. Determination of thermal conductivity and thermal diffusivity. General principles
BS EN ISO 9967:2008 Thermoplastics pipes - Determination of creep ratio
BS EN 13206:2017 Plastics. Thermoplastic covering films for use in agriculture and horticulture
BS EN 13206:2017+A1:2020 Plastics. Thermoplastic covering films for use in agriculture and horticulture
BS ISO 4065:2018 Thermoplastics pipes. Universal wall thickness table
BS EN ISO 16138:2006+A1:2019 Industrial valves. Diaphragm valves of thermoplastics materials
BS 5955-8:2001 Plastics pipework (thermoplastics materials). Specification for the installation of thermoplastic pipes and associated fittings for use in domestic hot and cold services and heating systems in buildings
BS 89100:2017 Plastics. Joining of thermoplastic moulded components. Specification of variables for thermal joining processes
BS 4998:1985 Specification for moulded thermoplastics dustbins (excluding lids)
BS EN 638:1995 Plastics piping and ducting systems - Thermoplastics pipes - Determination of tensile properties
BS EN 13677-3:2003 Reinforced thermoplastic moulding compounds - Specification for GMT - Specific requirements
BS EN 13207:2001 Silage thermoplastic films
BS 2782-1 Methods 134A and 134B:1992 Methods of testing plastics - Thermal properties - Determination of the oxidation induction time of thermoplastics
BS EN ISO 3994:2011 Plastics hoses. Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials. Specification
BS EN ISO 3994:2014 Plastics hoses. Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials Specification
BS EN ISO 306:2013 Plastics. Thermoplastic materials. Determination of Vicat softening temperature (VST)
BS EN ISO 9969:1995 Thermoplastics pipes - Determination of ring stiffness
BS EN ISO 9967:1995 Thermoplastics pipes - Determination of creep ratio
BS EN ISO 9969:2008 Thermoplastics pipes - Determination of ring stiffness
BS EN 16296:2012 Imperfections in thermoplastics welded joints. Quality levels
BS EN ISO 13967:2010 Thermoplastics fittings. Determination of ring stiffness
BS 5255:1989 Specification for thermoplastics waste pipe and fittings
BS EN 28233:1992 Thermoplastics valves. Torque. Test method
BS EN ISO 13967:2009 Thermoplastics fittings - Determination of ring stiffness

Japanese Industrial Standards Committee (JISC), plastic thermal desorption

JIS K 7212:1999 Plastics -- Determination of thermal stability of thermoplastics -- Oven method
JIS A 5709:1979 Thermoplastic bathtubs
JIS K 6814:2008 Thermoplastics pipes -- Thermal reversion test method
JIS K 7151 AMD 1:2009 Plastics -- Compression moulding test specimens of thermoplastic materials(Amendment 1)
JIS K 5981:1992 Thermoplastic and thermosetting powder coating films
JIS K 7152-3:1999 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 3: Small plates
JIS A 9511:2003 Preformed cellular plastics thermal insulation materials
JIS A 9511 R:2006 Preformed cellular plastics thermal insulation materials
JIS A 9511:2017 Preformed cellular plastics thermal insulation materials
JIS K 7206:1999 Plastics -- Thermoplastic materials -- Determination of Vicat softening temperature (VST)
JIS K 7206:2016 Plastics -- Thermoplastic materials -- Determination of Vicat softening temperature (VST)
JIS K 7151:1995 Plastics -- Compression moulding test specimens of thermoplastic materials
JIS K 7152:1995 Plastics -- Injection moulding of test specimens of thermoplastic materials
JIS Z 1704:1981 Plastic coating compound, strippable (hot dipping)
JIS K 7152-2:1999 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 2: Small tensile bars
JIS K 6339:1999 Spray thermoplastic hoses for agricultural use

Korean Agency for Technology and Standards (KATS), plastic thermal desorption

KS M 3071-2004(2019) Plastics􀫥Determination of thermal stability of thermoplastics􀫥Oven method
KS F 2611-2019 Hygrothermal performance of building materials and products－ Determination of moisture adsorption/desorption properties in response to humidity variation
KS M ISO 306:2012 Plastics-Thermoplastic materials-Determination of Vicat softening temperature(VST)
KS M ISO 306:2015 Plastics－Thermoplastic materials－Determination of Vicat softening temperature(VST)
KS M 3529-2008 Polyethylene(PE) valves for water distribution systems
KS I 3305-2014 Fuels made from used plastics by thermal decomposition
KS I 3305-2016 Fuels made from used plastics by thermal decomposition
KS M ISO 295:2010 Plastics-Compression moulding of test specimens of thermosetting materials
KS M ISO 295-2010(2020) Plastics－Compression moulding of test specimens of thermosetting materials
KS C 2006-1998 Testing method for ball pressure of thermoplastics
KS M ISO 4065:2022 Thermoplastics pipes — Universal wall thickness table
KS M 3071-2004 Plastics􀫥Determination of thermal stability of thermoplastics􀫥Oven method
KS M ISO 1827:2019 Rubber, vulcanized or thermoplastic — Determination of shear modulus and adhesion to rigid plates — Quadruple-shear methods
KS M ISO 9967-2016(2021) Thermoplastics pipes－Determination of creep ratio
KS M ISO 9969-2016(2021) Thermoplastics pipes－Determination of ring stiffness
KS C 2006-1998(2018)
KS M ISO 306-2015(2020) Plastics－Thermoplastic materials－Determination of Vicat softening temperature(VST)
KS F 4740-2016 Thermosetting plastic ceiling tile
KS F 4740-2016(2021) Thermosetting plastic ceiling tile
KS P ISO 8362-7:2020 Injection containers and accessories — Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part
KS M ISO 4065:2008 Thermoplastics pipes－Universal wall thickness table

Professional Standard - Aviation, plastic thermal desorption

HB/Z 349-2001 Heat-resistant thermoplastic injection molding process
HB 7597-1998 General Specification for Thermoplastic Molded Parts
HB/Z 5017-1976 Molding process of thermosetting plastic products
HB/Z 317-1998 Injection molding process of thermosetting plastic products
HB/Z 5017-1996 Molding process of thermosetting plastic products
HB 0-84-2001 General specification for molded parts of thermosetting plastics
HB 0-84-1984 Specifications for thermosetting plastic molded products
HB/Z 342-2000 Injection molding process of thermoplastic engineering plastics for aviation

Aerospace Industries Association/ANSI Aerospace Standards, plastic thermal desorption

AIA/NAS NAS 281-1947 Tubing - Thermoplastic (Rev. 1)

国家市场监督管理总局、中国国家标准化管理委员会, plastic thermal desorption

GB/T 37842-2019 Ball valves of thermoplastics materials
GB/T 38008-2019 Gate valves of thermoplastics materials
GB/T 39818-2021 Plastics—Thermosetting moulding materials—Determination of shrinkage
GB/T 17037.2-2020 Plastics—Injection moulding of test specimens of thermoplastic materials—Part 2:Small tensile bars
GB/T 39385-2020 Plastics piping and ducting systems—Thermoplastics pipes—Determination of ring flexibility
GB/T 40933-2021 Plastics—Film and sheeting—Guidance on the testing of thermoplastic films

Guangdong Provincial Standard of the People's Republic of China, plastic thermal desorption

DB44/T 927-2011 Thermoplastic Tableware

TR-TSE, plastic thermal desorption

TS 986-1971 PLASTICS DETERMINATION OF INCANDESCENCE RESISTANCE OF RIGID SELFEXTINGUISHING THERMOSETTING PLASTICS
TS 1149-1978 PLASTICS - INJECTION MOULDING TEST SPECIMENS OF TERMOPLASTIC MATERIALS
TS 859-1970 THERMOPLASTIC INSULATION TAPE
TS 1800-1975 POLYETHYLENE THERMOPLASTIC MATERIALS — DESIGNATION —
TS 1825-1975 PLASTICS DETERMINATION OF THE VICAT SOFTENING TEMPERATURE OF THERMOPLASTICS
TS 1408-1978 PLASTICS - COMPRESSION MOULDING TEST SPECIMENS OF THERMOSETTING MATERIALS
TS 1148-1978 PLASTICS-COMPRESSION MOULDING TEST SPECIMENS OF THERMOPLASTIC MATERIALS
TS 212-1965 THERMOPLASTIC AND RUBBER INSULATED Y - CABLES

Association Francaise de Normalisation, plastic thermal desorption

NF T58-003*NF EN ISO 293:2005 Plastics - Compression moulding of test specimens of thermoplastic materials
NF T58-003:1994 Plastics. Compression moulding test specimens of thermoplastic materials.
NF T54-082:1988 Plastics. Thermoplastic and thermosetting valves. Test of resistance to pressure.
NF T58-112:1971 Plastics materials. Surface coating of metals. Plastics coatings. Adhesion test.
NF EN 1704:1997 Systèmes de canalisations en plastique - Robinets thermoplastiques - Méthode d'essai pour la vérification d'un robinet après des cycles thermiques sous flexion.
NF T54-202:2002 Silage thermoplastic films.
NF T54-002:1981 Plastics. Thermoplastics parts of piping. Definitions. Dimensions.
NF T54-190:2017 Plastics - Thermoplastic covering films for use in agriculture and horticulture
NF T58-005*NF EN ISO 295:2004 Plastics - Compression moulding of test specimens of thermosetting materials
NF EN 13206+A1:2020 Plastiques - Films de couverture thermoplastiques pour utilisation en agriculture et horticulture
NF T51-566:2006 Plastics - Determination of drawing characteristics of thermoplastics in the molten state.
NF T54-422:2003 Plastics - Mulching thermoplastic films for use in agriculture and horticulture.
NF T54-022:1980 Plastics. Thermoplastic pipes and fittings. Determination of specific gravity.
NF T50-100/A1*NF EN ISO 472/A1:2018 Plastics - Vocabulary - Amendment 1 : additional items
NF EN ISO 472/A1:2018 Plastiques - Vocabulaire - Amendement 1 : termes supplémentaires
NF T54-911:2008 Thermoplastics pipes - Determination of creep ratio.
NF T54-911*NF EN ISO 9967:2016 Thermoplastics pipes - Determination of creep ratio
NF T51-021*NF EN ISO 306:2014 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)
NF EN ISO 293:2023 Plastiques - Moulage par compression des éprouvettes en matières thermoplastiques
NF T53-035:1981 Plastics. Amorphous thermoplastic moulding materials. Determination of post-shrinkage of test specimens.
NF T54-411*NF EN 15860:2018 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
NF T51-197:1980 PLASTICS. GUIDE TO DAMP HEAT TESTS.
NF EN ISO 306:2022 Plastiques - Matières thermoplastiques - Détermination de la température de ramollissement Vicat (VST)
NF T54-912:2008 Thermoplastics pipes - Determination of ring stiffness.
NF T54-983*NF EN ISO 13967:2010 Thermoplastics fittings - Determination of ring stiffness
NF T54-912*NF EN ISO 9969:2016 Thermoplastics pipes - Determination of ring stiffness
NF ISO 4665:2016 Caoutchouc vulcanisé ou thermoplastique - Résistance aux intempéries

American Society for Testing and Materials (ASTM), plastic thermal desorption

ASTM D7823-16 adjunct Standard Test Method for Determination of Low Level, Regulated Phthalates in Poly (Vinyl Chloride) Plastics by Thermal Desorption&x2014;Gas Chromatography/Mass Spectrometry
ASTM D7823-14 Standard Test Method for Determination of Low Level, Regulated Phthalates in Poly &40;Vinyl Chloride&41; Plastics by Thermal Desorption—Gas Chromatography/Mass Spectrometry
ASTM D7823-16 Standard Test Method for Determination of Low Level, Regulated Phthalates in Poly (Vinyl Chloride) Plastics by Thermal Desorption&x2014;Gas Chromatography/Mass Spectrometry
ASTM F409-17 Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings

European Committee for Standardization (CEN), plastic thermal desorption

EN ISO 3994:2011 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification
EN ISO 306:2022 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2022)
EN ISO 306:1996 Plastics - Thermoplastic Materials - Determination of Vicat Softening Temperature (VST) ISO 306:1994
EN ISO 306:2013 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)
PD CEN/TS 16892:2015 Plastics - Welding of thermoplastics - Specification of welding procedures
CEN/TS 16892:2015 Plastics - Welding of thermoplastics - Specification of welding procedures
EN ISO 293:2023 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2023)
EN ISO 293:2003 Plastics - Compression moulding test specimens of thermoplastic materials ISO 293: 1986
EN ISO 295:1998 Plastics - Compression Moulding of Test Specimens of Thermosetting Materials ISO 295:1991
EN ISO 16137:2006 Industrial valves - Check valves of thermoplastics materials ISO 16137:2006
EN ISO 294-2:2018 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:2018)
EN ISO 3994:2000 Plastics Hoses - Helical-Thermoplastic-Reinforced Thermoplastics Hoses for Suction and Discharge of Aqueous Materials - Specification
EN ISO 13967:2009 Thermoplastics fittings - Determination of ring stiffness (ISO 13967:2009)
EN 13207:2001 Silage thermoplastic films
EN ISO 293:2005 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2004)
EN ISO 295:2004 Plastics - Compression moulding of test specimens of thermosetting materials ISO 295:2004
EN ISO 9967:1995 Plastics Pipes - Determination of Creep Ratio (ISO 9967 : 1994)
EN ISO 9969:1995 Thermoplastic Pipes - Determination of Ring Stiffness (ISO 9969 : 1994)
EN 16296:2012 Imperfections in thermoplastics welded joints - Quality levels
EN 16296:2021 Imperfections in thermoplastics welded joints - Quality levels

YU-JUS, plastic thermal desorption

JUS G.S2.605-1980 Plastics Compression moulding test specimens of thermosetting materials
JUS G.S2.607-1980 Plastics. Recommended practice for injection moulding of thermoplastic specimens
JUS G.S3.508-1991 Plastics.Termoplastic pipes.Determination of tensile properties
JUS G.S2.641-1991 Pastics.Thermoplastic materials.Determination of Vicat softening temperature
JUS G.S2.601-1991 Plastics.Determaination of the melt flow rate of thermoplastic
JUS G.S2.606-1980 Plastics. Recommended practice for moulding of thermoplastic specimens
JUS G.S2.742-1996 Plastics - Optical properties of thermoplastic films - Determination of haze of transparent plastic films

Association of German Mechanical Engineers, plastic thermal desorption

DVS 2204-1-2010
DVS 2204-1-2011 Adhesive bonding of thermoplastics
VDI 2465 Blatt 2-1999 Measurement of soot (Ambient Air) - Thermographical determination of elemental carbon after thermal desorption of organic carbon
VDI 2465 Blatt 2-2016 Measurement of soot (ambient air) - Thermographic determination of elemental carbon after thermal desorption of organic carbon
DVS 2204-3-1981 Glueing of thermoplastics; polystyrene and allied plastics
DVS 2207-3 Beiblatt 2-2003
DVS 2207-3 Beiblatt 2-2013 "Welding of thermoplastics - Hot-gas string-bead welding and hot-gas welding with torch separate from filler rod of pipes, pipe components and sheets - Requirements for welding equipment and accessories"
DVS 2207-3 Beiblatt 2-2005 "Welding of thermoplastics - Hot-gas string-bead welding and hot-gas welding with torch separate from filler rod of pipes, pipe components and sheets - Requirements for welding equipment and accessories"
DVS 2243-2005
DVS 2243-2013
DVS 2243-2003
DVS 2204-4-1981 Glueing of thermoplastics; polyamides
DVS 2243-2014
DVS 2312-2005
DVS 2312-1994
DVS 2312-2011
DVS 2215-1-1999 Hot plate welding of mouldings made from thermoplastics in volume production
DVS 2208-1-1983 Machinery and equipment for the welding of thermoplastics; heated-tool welding
DVS 2207-11-1985 Heated-tool welding of thermoplastics; pipelines of polypropylene (PP)
VDI 2541-1975 Friction bearings made from thermoplastics

National Sanitation Foundation (NSF), plastic thermal desorption

NSF 21-2015 Thermoplastic refuse containers

GM Europe, plastic thermal desorption

GME 14012-2008 Thermoplastic Tubing for Hot Diesel Fuel Lines (English/German; This standard may be applied only for current projects incl. Global Epsilon e (37##). It is Superceded for all future projects and replaced by GMW14587.)

CZ-CSN, plastic thermal desorption

CSN 64 0861-1979 Plastios. Determination of melt flow index of thermoplastics
CSN 64 0521-1984 Plastics. Determination of the Vicat oftening temperature of thermo- lastics
CSN 64 0528-1993 Plastics. Determination of coefficient of linear thermal expansion of plastics
CSN ISO 9113:1993 Plastics. Polypropylene (PP) and propylene-copolymer thermoplastics. Determination of izotaciticity index
CSN ISO 293:1992 Plastics. Compresion moulding test specimens of thermoplastic materials
CSN 34 6501 Cast.4-1985 Thermal endurance of laminated plastics
CSN 64 0626-1989 Plastics. Determination of tensile trenght of thermoplastics pipes on n annular test piece
CSN 64 0210-1987 Injection moulding of test specimens of hermoplastics
CSN 64 0321-1963 Testing of polystyrene hermoplastics
CSN 34 6501 Cast.8-1989 Thermal endurance of plastic films
CSN 64 0808-1988 Testing of plastics. Determination of prooessing reversion and post-revcrsion of moulding thermo- plastics

BE-NBN, plastic thermal desorption

NBN T 40-101-1988 Plastics - Determination of the melt flow rate of thermoplastics

CH-SNV, plastic thermal desorption

SN 234 352-1978 Shell end mills with tenon drive
SNV 81141-1942
VSM 15158-1971 Rectangular or square parallel keys and their corresponding keyways (Dimensions in millimetres)
SNV 93100-1966
VSM 11855-1974
SN EN 13067-2021 Plastics welding personnel - Qualification of welders - Thermoplastics welded assemblies

PL-PKN, plastic thermal desorption

PN C89418-1990 Plastics Determination of volatile matter in thermoplastics
PN C89011-1992 Plastics. Compression moulding test specimens of thermoplasticmaterials
PN C89012-1988 Plastics Recommended practice for injection moulding test specirnens of thermoplastic materials
PN C89024-1993 Plastics. Thermoplastic materials. Determination of Vicat softening temperature
PN-EN 1871-2021-03 E Road marking materials -- Paint, thermoplastic and cold plastic materials -- Physical properties
PN-EN 13067-2021-02 E Platics welding personnel--Qualfication of welders--Thermoplastics welded assemblies
PN B75704-02-1990 Toilet seats of thermoplastics Toilet seats for standard water closet Dimensions
PN B75704-03-1988 Toilet seats of thermoplastics Toilet seats for compact water closet Dimensions
PN B75704-04-1988 Toilet seats of thermoplastics Toilet seats for children's water closet Dimensions
PN C89004-1987 Thermoplastics products Marks and marking

Danish Standards Foundation, plastic thermal desorption

DS/EN ISO 3994:2011 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification
DS/EN ISO 16136:2006 Industrial valves – Butterfly valves of thermoplastics materials
DS/EN ISO 16139:2006 Industrial valves – Gate valves of thermoplastics materials
DS/EN ISO 293:2005 Plastics - Compression moulding of test specimens of thermoplastic materials
DS/EN ISO 16137:2006 Industrial valves – Check valves of thermoplastics materials
DS/EN ISO 21787:2006 Industrial valves – Globe valves of thermoplastics materials
DS/INSTA 219:1990 Plastics pipes. Sealing rings of thermoplastic elastomers
DS/EN ISO 16135:2006 Industrial valves – Ball valves of thermoplastics materials
DS/EN ISO 16138:2006 Industrial valves - Diaphragm valves of thermoplastics materials
DS/EN 13655:2003 Plastics - Mulching thermoplastic films for use in agriculture and horticulture
DS/EN 1871:2020 Road marking materials – Paint, thermoplastic and cold plastic materials – Physical properties
DS/EN 12061:1999 Plastics piping systems - Thermoplastics fittings - Test method for impact resistance
DS/EN 15860:2010 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
DS/EN ISO 580:2005 Plastics piping and ducting systems – Injection-moulded thermoplastics fittings – Methods for visually assessing the effects of heating
DS/EN ISO 306:2004 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)
DS/EN 28233:2003 Thermoplastics valves - Torque - Test method
DS/EN ISO 9967:2008 Thermoplastics pipes - Determination of creep ratio
DS/EN ISO 9969:2008 Thermoplastics pipes - Determination of ring stiffness
DS/EN ISO 13967:2010 Thermoplastics fittings - Determination of ring stiffness

Lithuanian Standards Office , plastic thermal desorption

LST EN ISO 3994:2011 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification (ISO 3994:2007)
LST EN 1871-2021 Road marking materials - Paint, thermoplastic and cold plastic materials - Physical properties
LST EN 13067-2020 Plastics welding personnel - Qualification of welders - Thermoplastics welded assemblies
LST EN 13655-2002 Plastics - Mulching thermoplastic films for use in agriculture and horticulture
LST EN ISO 16136:2006 Industrial valves - Butterfly valves of thermoplastics materials (ISO 16136:2006)
LST EN 12061-2002 Plastics piping systems - Thermoplastics fittings - Test method for impact resistance
LST EN 15860-2010 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
LST EN ISO 293:2005 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2004)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, plastic thermal desorption

GB/T 34445-2017 Test method of hot-tack property for heat sealing surfaces of thermoplastic polymer and thermoplastic composite material

International Federation of Trucks and Engines, plastic thermal desorption

NAVISTAR CEMS G-15-2002 Plastic Coatings - Powder System (Includes Appendix)
NAVISTAR MPAPS L-6040-2016 Thermoplastic Elastomer Molding Compounds
NAVISTAR TMS 6040-2016 VOID - Thermoplastic Elastomer Molding Compounds
NAVISTAR CEMS DT-11-2001 Heat Stability of Thermoplastic Trim Materials

HU-MSZT, plastic thermal desorption

VDI - Verein Deutscher Ingenieure, plastic thermal desorption

VDI 2006-1970 Gestalten von Spritzgussteilen aus thermoplastischen Kunststoffen

American National Standards Institute （ANSI), plastic thermal desorption

ANSI/NSF 21-1996 Thermoplastic Refuse Containers

ES-AENOR, plastic thermal desorption

AASHTO - American Association of State Highway and Transportation Officials, plastic thermal desorption

DIVISION II SEC 30-1996 Thermoplastic Pipe (Interim 1998)

AENOR, plastic thermal desorption

UNE-EN ISO 3994:2014 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification (ISO 3994:2014)
UNE-EN ISO 16136:2007 Industrial valves - Butterfly valves of thermoplastics materials (ISO 16136:2006)
UNE-EN 15860:2011 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
UNE-EN 12061:1999 Plastics piping systems - Thermoplastics fittings - Test method for impact resistance
UNE-EN 12943:2000 FILLER MATERIALS FOR THERMOPLASTICS - SCOPE, DESIGNATION, REQUIREMENTS, TESTS
UNE-EN ISO 293:2006 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2004)

RO-ASRO, plastic thermal desorption

STAS 9047-1971 PLASTICS Determination of the melt flow rate of thermoplastics
STAS 6572/1-1979 Plastics THERMOPLASTICS SPECIMENS MOULDING BY INJECTION General specifications
STAS 6572/2-1979 Plastics THERMOPLASTICS SPECIMENS MOULDING BY COMPRESSION General specifications
STAS 6127-1968
STAS 7542-1979 Thermosetting plastics UREO-FORMALDEHYDIC MOULDINGS
STAS 5887-1968
STAS 6129-1980 PLASTICS Determination of frost brittle point of foils and plates of thermosetting materials

CEN - European Committee for Standardization, plastic thermal desorption

EN ISO 1133:2005 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
EN ISO 1133:1999 Plastics - Determination of the Melt Mass-Flow Rate (MFR) and the Melt Volume-Flow Rate (MVR) of Thermoplastics
EN ISO 306:2004 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)
PREN 1871-2018 Road marking materials - Paint@ thermoplastic and cold plastic materials - Physical properties
EN ISO 7808:1998 Plastics - Thermosetting moulding materials- Determination of transfer flow
EN 13207:2018 Plastics - Thermoplastic silage films and tubes for use in agriculture
EN ISO 9967:2007 Thermoplastics pipes - Determination of creep ratio
EN ISO 9969:2007 Thermoplastics pipes - Determination of ring stiffness

SE-SIS, plastic thermal desorption

SIS SS 16 11 54-1980 Plastics — Injection moulding test specimens of thermoplastic materials
SIS SS 16 67 12-1979 Thermoset polyester sheet moulding compounds
SIS SMS 1677-1961
SIS SS 16 67 11-1979 Thermoset polyester moulding compounds
SIS SS-EN 28 233-1991 Thermoplastic valves — Torque — Test method

Canadian Standards Association (CSA), plastic thermal desorption

CSA B137 SERIES-05 UPD 1-2007 Thermoplastic Pressure Piping Compendium

PT-IPQ, plastic thermal desorption

NO-SN, plastic thermal desorption

NS 2971-2006 Cover plates of themoplastics for cables

IN-BIS, plastic thermal desorption

IS 13960-1994 Thermoplastic strappings - specification

IT-UNI, plastic thermal desorption

UNI 4287-1959
UNI 4301-1959
UNI 4299-1959
UNI 4290-1959
UNI 4292-1959
UNI 4298-1959
UNI 4296-1959
UNI 4300-1959
UNI 4293-1959
UNI 4297-1959
UNI EN 13067-2021 Plastics welding personnel - Qualification of welders - Thermoplastics welded assemblies
UNI 6663-1970

AT-ON, plastic thermal desorption

ONORM C 9515-1982 Testing of plastics; Determination of the Melt-Flow-Index of tbermoplastics
ONORM EN 743-1994 Plastics piping and ducting systems. Thermoplastics pipes. Determination of the longitudinal reversion
OENORM EN 1871-2020 Road marking materials - Paint, thermoplastic and cold plastic materials - Physical properties

AIA/NAS - Aerospace Industries Association of America Inc., plastic thermal desorption

NAS281-1947 Tubing - Thermoplastic (Rev 1)

KR-KS, plastic thermal desorption

KS M ISO 4065-2022 Thermoplastics pipes — Universal wall thickness table
KS M ISO 1827-2019 Rubber, vulcanized or thermoplastic — Determination of shear modulus and adhesion to rigid plates — Quadruple-shear methods
KS M ISO 9967-2016 Thermoplastics pipes－Determination of creep ratio
KS M ISO 9969-2016 Thermoplastics pipes－Determination of ring stiffness
KS P ISO 8362-7-2020 Injection containers and accessories — Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part

Indonesia Standards, plastic thermal desorption

SNI 15-2125-1991 Glass bottles for drinks using hot filling
SNI 06-4595-1998 Plastics - Injections moulding test specimens of thermo plastic materials
SNI ISO 306:2011 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)

Professional Standard - Machinery, plastic thermal desorption

JB/T 8507-1996 High frequency plastic heat sealing machine

General Motors Corporation (GM), plastic thermal desorption

GM 9984865-1989 Topcoats for Heat Sensitive Plastics Revision A

US-FCR, plastic thermal desorption

FCR FED PS47-71-1971 HEAT-SHRINKABLE FLUOROCARBON PLASTIC TUBING

ZA-SANS, plastic thermal desorption

SANS 1036:2004 Rubber, vulcanized or thermoplastic - Determination of adhesion to textile fabric
SANS 1655:2004 Welding of thermoplastics - Welding rods, fillers and solvents
SANS 4065:1996 Thermoplastics pipes - Universal wall thickness table
SANS 10268-3:2005 Welding of thermoplastics - Welding processes Part 3: Hot-gas welding

农业农村部, plastic thermal desorption

SC/T 8155-2018 Technical requirements for demoulding of glass fiber reinforced plastic fishing boat hulls

TH-TISI, plastic thermal desorption

TIS 1899-1999 Thermoplastics pipes and fittings for hot and cold water systems

GM North America, plastic thermal desorption

GM GM3628M-1989 Hot Melt Sealer, Closed-Cell Foam-in-Place Thermoplastic
GMN10031-2009 Thermoplastic Polyolefin ?Recycled Rubber Modified
GM 9984831-1989 Primer - Rigid, Conductive, for Thermoplastics

Standard Association of Australia （SAA）, plastic thermal desorption

AS 1368:2000 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)

未注明发布机构, plastic thermal desorption

DIN EN ISO 294-3:1998 Plastics Injection molding of thermoplastic test specimens Part 3: Small plates
BS ISO 4065:2018(2020) Thermoplastics pipes — Universal wall thickness table
DIN EN ISO 293:2003 Plastics — Compression molding test specimens of thermoplastic materials
BS EN 763:1995(1999)*BS 2782-11 MTD 01103A-B:1995 Plastics piping and ducting systems — Injection - moulded thermoplastics fittings — Test method for visually assessing effects of heating
BS EN 28233:1992(2000) Thermoplastics valves — Torque — Test method
BS 5255:1989(2009) Specification for Thermoplastics waste pipe and fittings

U.S. Military Regulations and Norms, plastic thermal desorption

ARMY A-A-52404 VALID NOTICE 1-2004 INSULATION SHEET, CELLULAR, PLASTIC: THERMAL (METRIC)
ARMY A-A-52404-1992 INSULATION SHEET, CELLULAR, PLASTIC: THERMAL (METRIC)

工业和信息化部, plastic thermal desorption

HG/T 2006-2022 Thermoset and Thermoplastic Powder Coatings

CL-INN, plastic thermal desorption

INDITECNOR 55-17d-1962

Taiwan Provincial Standard of the People's Republic of China, plastic thermal desorption

CNS 9354-1982 Bushes for Plain Bearings, Press Bushes Made From Thermoplastics
CNS 8516-1982 Method of Test for Flow Rates of Thermoplastics by Extrusion Plastometer
CNS 10487-1988 Polyethylene Foam for Heat Insulating
CNS 12627-1989 General Rules for Tests for Thermal Ageing Properties of Thermoplastics in the Form of Sheet by Means of Ovens

SG-SPRING SG, plastic thermal desorption

SS 369-2014 Specification for moulded thermoplastic refuse bins

AWS - American Welding Society, plastic thermal desorption

G1.1M/G1.1-2006 Guide to Ultrasonic Assembly of Thermoplastics
G1.10M-2001 Guide for The Evaluation of Hot Gas@ Hot Gas Extrusion@ and Heated Tool Butt Thermoplastic Welds

ECIA - Electronic Components Industry Association, plastic thermal desorption

230-1959 Color Marking of Thermoplastic Covered Wire

Professional Standard - Commodity Inspection, plastic thermal desorption

SN/T 0906-2000 Method for injection moulding test spcimens of thermoplastic materials for import and export
SN/T 4934-2017 Determination of Volatile Organic Compounds in Automotive Textiles by Thermal Desorption-Gas Chromatography-Mass Spectrometry

GOSTR, plastic thermal desorption

GOST ISO 1827-2019 Rubber and thermoplastics. Determination of shear modulus and adhesion to rigid plates. Four-element sample shear methods
GOST ISO 4065-2019 Thermoplastic pipes. Universal wall thickness table

Professional Standard - Agriculture, plastic thermal desorption

NY/T 1207-2006 The thermoluminescence detection of irradiated spices and dehydrated vegetables

VN-TCVN, plastic thermal desorption

TCVN 6141-2003 Thermoplastics pipes.Universal wall thickness table

Professional Standard - Petrochemical Industry, plastic thermal desorption

SH/T 1541-2006 Test method for appearance of thermoplastic granules
SH/T 1541-1993 Appearance Test Method of Thermoplastic Granules

International Truck and Engine Corporation (ITEC), plastic thermal desorption

INTERN 6040-2008 Thermoplastic Elastomer Molding Compounds Revision E

Military Standard of the People's Republic of China-General Armament Department, plastic thermal desorption

GJB 9898-2020 Specification for thermoplastic polyimide molding compounds