ZH
RU
ES
Compare the results of the three methods
Compare the results of the three methods, Total:57 items.
In the international standard classification, Compare the results of the three methods involves: Ergonomics, Aircraft and space vehicles in general, Photography, Inorganic chemicals, Rubber and plastics products, Structures of buildings, Microbiology, Water quality, Quality, Metrology and measurement in general, Paints and varnishes.
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Compare the results of the three methods
- ASHRAE 3847-1995 Comparison of Energy Prediction of Three Ground-Coupling Heat Transfer Calculation Methods
- ASHRAE AC-02-14-2-2002 Comparison of Three Fault Detection Methods Based on Field Data of an Air-Handling Unit
- ASHRAE CH-99-6-2-1999 Comparison of Various Methods to Distribute Supply Air in Industrial Facilities
- ASHRAE AB-10-012-2010 A Comparative Analysis and Validation of Two DX Cooling Coil Modeling Methods
- ASHRAE 4412-2001 Multiple Model Approach of a Residential Heat Pump for Integration in a Building Thermal Simulation Code and Comparison with Experimental Results
- ASHRAE 3928-1995 Measurement of Two-Phase Refrigerant Liquid-Vapor Mass Flow Rate - Part III: Combined Turbine and Venturi Meters and Comparison with Other Methods
American Welding Society (AWS), Compare the results of the three methods
- WRC 251:1979 Comparison Of Three-Dimensional Finite Element And Photoelastic Results For Lateral Connection, WC-12B2
WRC - Welding Research Council, Compare the results of the three methods
- BULLETIN 251-1979 COMPARISON OF THREE-DIMENSIONAL FINITE ELEMENT AND PHOTELASTIC RESULTS FOR LATERAL CONNECTION@ WC-12B2
AENOR, Compare the results of the three methods
- UNE 66057:1978 COMPARISON OF TWO MEANS IN THE CASE OF PAIRED OBSERVATIONS
- UNE-EN ISO 17994:2014 Water quality - Requirements for the comparison of the relative recovery of microorganisms by two quantitative methods (ISO 17994:2014)
German Institute for Standardization, Compare the results of the three methods
- DIN 38402-71:2020-10 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 71: Equivalence of two analysis methods based on the comparison of analysis results (A 71)
- DIN EN ISO 17994:2014-06 Water quality - Requirements for the comparison of the relative recovery of microorganisms by two quantitative methods (ISO 17994:2014); German version EN ISO 17994:2014
- DIN CEN/TS 16490:2013-06*DIN SPEC 10127:2013-06 Fertilizers - Comparison of the CEN/TC 260/WG 7 ring test results with tolerances given in the Regulation (EC) Nr 2003/2003 Annex II and conclusions; German version CEN/TS 16490:2013
- DIN 38402-71:2002 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 71: Equivalance of two analytical methods based on the comparison of results and their statistical evaluation, Procedure for quantitative c
- DIN EN ISO 20685:2006 3-D scanning methodologies for internationally compatible anthropometric databases (ISO 20685:2005); German version EN ISO 20685:2005
- DIN EN ISO 20685:2010 3-D scanning methodologies for internationally compatible anthropometric databases (ISO 20685:2010); German version EN ISO 20685:2010
International Organization for Standardization (ISO), Compare the results of the three methods
- ISO 20685:2005 3-D scanning methodologies for internationally compatible anthropometric databases
- ISO 20685:2010 3-D scanning methodologies for internationally compatible anthropometric databases
- ISO 20462-2:2005/cor 1:2007 Photography - Psychophysical experimental methods for estimating image quality - Part 2: Triplet comparison method; Technical Corrigendum 1
- ISO/CD TR 20659-2:2023 Rheological test methods — Fundamentals and interlaboratory comparisons — Part 2: Determination of the time-dependent structural change (thixotropy).
- ISO/DTR 20659-2:2023 Rheological test methods — Fundamentals and interlaboratory comparisons — Part 2: Determination of the time-dependent structural change (thixotropy).
Association Francaise de Normalisation, Compare the results of the three methods
- NF X35-012:2010 3-D scanning methodologies for internationally compatible anthropometric databases.
- NF EN ISO 17994:2014 Qualité de l'eau - Exigences pour la comparaison du rendement relatif des microorganismes par deux méthodes quantitatives
- XP CEN/TS 16490:2013 Engrais - Comparaison des résultats des essais interlaboratoires menés par le CEN/TC 260/WG 7 avec les tolérances données dans le règlement (CE) no 2003/2003 Annexe II et conclusions
British Standards Institution (BSI), Compare the results of the three methods
- BS EN ISO 20685:2010 3-D scanning methodologies for internationally compatible anthropometric databases
- BS ISO 20462-2:2005 Photography. Psychophysical experimental methods for estimating image quality - Triplet comparison method
U.S. Military Regulations and Norms, Compare the results of the three methods
Korean Agency for Technology and Standards (KATS), Compare the results of the three methods
- KS I ISO 17994:2021 Water quality — Requirements for the comparison of the relative recovery of microorganisms by two quantitative methods
- KS A ISO 20462-2-2007(2017) Photography-Psychophysical experimental methods for estimating image quality-Part 2:Triplet comparison method
- KS A ISO 20462-2-2007(2022) Photography-Psychophysical experimental methods for estimating image quality-Part 2:Triplet comparison method
KR-KS, Compare the results of the three methods
- KS I ISO 17994-2021 Water quality — Requirements for the comparison of the relative recovery of microorganisms by two quantitative methods
API - American Petroleum Institute, Compare the results of the three methods
- API DR79-1984 Development of a Diluting Concentration method for Testing the Acute Toxicity of Chemically Dispersed Oil@ and the Results of Comparative studies (Reprinted in 1993)
ES-UNE, Compare the results of the three methods
- UNE-CEN/TS 16490:2016 Fertilizers - Comparison of the CEN/TC 260/WG 7 ring test results with tolerances given in the Regulation (EC) Nr 2003/2003 Annex II and conclusions
US-FCR, Compare the results of the three methods
- FCR COE CRD-C 24-01-2001 Standard Test Method for Comparing Concretes on the Basis of the Bond Developed with Reinforced Steel
RU-GOST R, Compare the results of the three methods
- GOST R ISO 20685-2013 Ergonomics. 3-D scanning methodologies for internationally compatible anthropometric databases
- GOST R ISO 5725-4-2002 Accuracy (trueness and precision) of measurement methods and results. Part 4. Basic methods for the determination of the trueness of a standard measurement method
- GOST R ISO 5725-5-2002 Accuracy (trueness and precision) of measurement methods and results. Part 5. Alternative methods for the determination of the precision of a standard measurement method
American Society for Testing and Materials (ASTM), Compare the results of the three methods
- ASTM E2282-14 Standard Guide for Defining the Test Result of a Test Method
- ASTM F904-98 Standard Test Method for Comparison of Bond Strength or Ply Adhesion of Similar Laminates Made from Flexible Materials
- ASTM F904-98(2003) Standard Test Method for Comparison of Bond Strength or Ply Adhesion of Similar Laminates Made from Flexible Materials
- ASTM A944-22 Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
- ASTM A944-05 Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
- ASTM A944-99 Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
- ASTM A944-99(2004) Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
- ASTM A944-10 Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
- ASTM F904-98(2008) Standard Test Method for Comparison of Bond Strength or Ply Adhesion of Similar Laminates Made from Flexible Materials
- ASTM A944-10(2015) Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
- ASTM F904-16 Standard Test Method for Comparison of Bond Strength or Ply Adhesion of Similar Laminates Made from Flexible Materials
未注明发布机构, Compare the results of the three methods
- BS ISO 20462-2:2005(2007) Photography — Psychophysical experimental methods for estimating image quality — Part 2 : Triplet comparison method
European Committee for Standardization (CEN), Compare the results of the three methods
- EN ISO 17994:2014 Water quality - Requirements for the comparison of the relative recovery of microorganisms by two quantitative methods
ESDU - Engineering Sciences Data Unit, Compare the results of the three methods
- ESDU 02013-2002 Full-potential (FP) method for three-dimensional wings and wing-body combinations - inviscid flow Part 1: Principles and results
- ESDU 02013 A-2006 Full-potential (FP) method for three-dimensional wings and wing-body combinations - inviscid flow. Part 1: Principles and results.
ZA-SANS, Compare the results of the three methods
- SANS 5725-4:2009 Accuracy (trueness and precision) of measurement methods and results Part 4: Basic methods for the determination of the trueness of a standard measurement method
- SANS 5725-5:2009 Accuracy (trueness and precision) of measurement methods and results Part 5: Alternative methods for the determination of the precision of a standard measurement method
- SANS 5725-3:2009 Accuracy (trueness and precision) of measurement methods and results Part 3: Intermediate measures of the precision of a standard measurement method
AASHTO - American Association of State Highway and Transportation Officials, Compare the results of the three methods
- T 159-1988 Standard Method of Test for Comparing Concrete on the Basis of the Bond Developed with Reinforcing Steel (HM-22; Part IIA; ASTM Designation: C 234-87; (Discontinued))