ZH
RU
ES

Selectivity in Method Validation

Selectivity in Method Validation, Total:499 items.

In the international standard classification, Selectivity in Method Validation involves: Electricity. Magnetism. Electrical and magnetic measurements, General methods of tests and analysis for food products, Sterilization and disinfection, Biology. Botany. Zoology, Testing of metals, Coals, Water quality, Air quality, Laboratory medicine, Petroleum products in general, Animal feeding stuffs, Surface treatment and coating, Construction materials, Milk and milk products, Fuels, Quality, Products of the textile industry, Fertilizers, Paper and board, Analytical chemistry, Inorganic chemicals, Protection against fire, Test conditions and procedures in general, Measurement of fluid flow, Metrology and measurement in general, Ceramics, Elements of buildings, Nuclear energy engineering, Adhesives, Electronic component assemblies, Electrical engineering in general, Non-destructive testing, Wastes, Safety of machinery, Soil quality. Pedology, Electronic components in general, Medical equipment, Domestic electrical appliances in general, Protective equipment, Internal combustion engines, Materials for aerospace construction, Processes of the textile industry, Metalliferous minerals, Furniture, Microbiology, Linear and angular measurements, Geology. Meteorology. Hydrology, Information sciences. Publishing, Rubber, Construction industry, Aircraft and space vehicles in general, Non-ferrous metals, Protection of and in buildings, Company organization and management, Environmental protection, Mathematics, Radiation measurements, Optics and optical measurements, Hydraulic energy engineering, Non-metalliferous minerals, Iron and steel products, Organic chemicals, Equipment for the chemical industry, Characteristics and design of machines, apparatus, equipment, Agricultural machines, implements and equipment, Tyres, Environmental testing, Industrial automation systems, Thermodynamics and temperature measurements, Mechanical structures for electronic equipment, Audio, video and audiovisual engineering, Measurement of volume, mass, density, viscosity, Products of non-ferrous metals, Fluid storage devices, Radiocommunications, Corrosion of metals, Products of the chemical industry, Paints and varnishes.

CU-NC, Selectivity in Method Validation

• NC 90-19-17-1987 Metrological Assurance. Low Frecuency Selective Microvoltrneters. Methods and Means of Verification

RU-GOST R, Selectivity in Method Validation

• GOST 8.119-1985 State system for ensuring the uniformity of measurements. Selective electron voltmeters. Methods of verification
• GOST 1520-2014 Selectively refined oils. Method for determination of furfural
• GOST R 8.683-2009 State system for ensuring the uniformity of measurements. Selective electronic voltmeters. Verification methods
• GOST R 8.704-2010 State system for ensuring the uniformity of measurements. Working dilatometers. Verification procedure
• GOST R 8.671-2009 State system for ensuring the uniformity of measurements. In process gauges of linear parameters. Verification methods
• GOST R 55492-2013 Electronics assembly technology. Part 3. Selection guidance of environmental and endurance test methods for solder joints
• GOST R ISO/TR 8550-2-2008 Statistical methods. Guide to the selection and usage of acceptance sampling systems of discrete items in lots. Part 2. Sampling by attributes
• GOST 8.634-2013 State system for ensuring the uniformity of measurements. Gas-analytical interferencial.Verification procedure
• GOST R 8.730-2010 State system for ensuring the uniformity of measurements. Interference refractometers for gas analysis. Verification procedure
• GOST R 53051-2008 Machinery and tools for digging out and selection of seedlings and saplings in nursery forests. Test methods
• GOST R 50779.60-2017 Statistical methods for use in proficiency testing by interlaboratory comparison
• GOST R ISO 14122-1-2009 Safety o machinery - permanent means of access to machinery. Part 1. Choice of fixed means of access between two levels
• GOST 8.442-1981 State system for ensuring the uniformity of measurements. Moisture meters neutron. Methods and means of verification
• GOST 8.624-2013 State system for ensuring the traceability of measurements. Laboratory water in crude oil analyzers. Verification method
• GOST ISO 14123-1-2000 Safety of machinery. Reduction of risks to health from hazardous substances emitted by machihery. Part 1. Principles and technical requirements
• GOST R 8.616-2006 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring the ultrasound power in water within the frequency range from 0,5 to 12 MHz
• GOST R ISO/TR 8550-3-2008 Statistical methods. Guide to the selection and usage of acceptance sampling systems of discrete items in lots. Part 3. Sampling by variables

Canadian General Standards Board （CGSB), Selectivity in Method Validation

• CGSB 4.2 NO. 27-98-CAN/CGSB-1998 Methodes Pour Epreuves Textiles Comportement Au Feu - Selection Des Methodes
• CGSB 1-GP-71 METH 143.1-1980 Methods of Testing Paints and Pigments Long-Term Outdoor Performance Selection, Exposure and Examination of Panels
• CGSB 1-GP-71 METH 122.1-1974 Methods of Testing Paints and Pigments Accelerated Weathering Selection, Exposure and Examination of Panels

AASHTO - American Association of State Highway and Transportation Officials, Selectivity in Method Validation

• DIVISION I-A 4.2-1996 Selection of Analysis Method (Interim 1999)

Association Francaise de Normalisation, Selectivity in Method Validation

• NF V03-045*NF ISO 13495:2014 Foodstuffs - Principles of selection and criteria of validation for the varietal identification methods using specific nucleic acid
• NF EN 14575:2005 Géomembranes - Méthode d'essai sélective pour la détermination de la résistance à l'oxydation
• NF EN 12447:2021 Géotextiles et produits apparentés - Méthode d'essai sélective pour la détermination de la résistance à l'hydrolyse dans l'eau
• NF ISO 13495:2014 Produits alimentaires - Principes de sélection et critères de validation des méthodes d'identification variétale par analyses d'acides nucléiques spécifiques
• XP V04-551*XP CEN ISO/TS 23758:2021 Guidelines for the validation of qualitative screening methods for the detection of residues of veterinary drugs in milk and milk products
• NF G07-180:1985 Textiles - Fire Behaviour - Data for choosing standardized methods of test to be used
• NF E09-081-1*NF EN 1093-1:2009 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1 : selection of test methods
• XP X31-131:2020 Test methods for the environmental characterization of solid matrices - Characterization of analytical methods - Guide for the validation of physico-chemical analytical methods in soil, sediment and sludge matrices and for the selection of test samples
• NF A09-105/A1*NF EN 1779/A1:2004 Non-destructive testing - Leak testing - Criteria for method and technique selection
• NF X06-100:1993 Application of statistics-Guide for the introduction selection of standardized statistical methods
• NF EN ISO 12960:2020 Géotextiles et produits apparentés - Méthodes d'essai sélectives pour la détermination de la résistance aux liquides acides et alcalins
• NF EN 14414:2004 Géosynthétiques - Méthode d'essai sélective permettant de déterminer la résistance chimique pour l'utilisation dans les centres de stockage de déchets
• FD A05-013*FD ISO/TR 16203:2016 Corrosion of metals and alloys - Guidelines for the selection of methods for particle-free erosion corrosion testing in flowing liquids
• NF EN ISO 16140-3:2021 Microbiologie de la chaîne alimentaire - Validation des méthodes - Partie 3 : protocole pour la vérification dans un seul laboratoire de méthodes de référence et de méthodes alternatives validées
• NF ISO 26842-1:2020 Adhésifs - Méthodes d'essai pour la sélection et l'évaluation des adhésifs destinés aux produits en bois utilisés à l'intérieur - Partie 1 : résistance à la délamination dans des environnements non sévères
• NF T46-038:1995 Rubber vulcanized of thermoplastic. Resistance to ozone cracking. Reference and alternative methods for determining ozone concentration in laboratory test chambers.
• NF V08-103-3*NF EN ISO 16140-3:2021 Microbiology of the food chain - Method validation - Part 3 : protocol for the verification of reference methods and validated alternative methods in a single laboratory (ISO 16140-3:2021)
• NF B41-201:1993 Advanced technical ceramics - Methods of testing monolithic ceramicas - Guidance on the sampling and selection of test pieces
• NF E29-732:2016 Gas containers - Cylinders and containers for compressed hydrogen -Test method for selecting construction materials
• NF EN 300338-3:2020 Caractéristiques techniques et méthodes de mesure pour les équipements destinés à la génération, l'émission et la réception d'Appels Sélectifs Numériques (ASN) dans le service mobile maritime en ondes hectométriques, en ondes hectométriq...
• NF EN 300338-5:2020 Caractéristiques techniques et méthodes de mesure pour les équipements destinés à la génération, l'émission et la réception d'Appels Sélectifs Numériques (ASN) dans le service mobile maritime en ondes hectométriques, en ondes hectométriq...
• NF EN 300338-6:2020 Caractéristiques techniques et méthodes de mesure pour les équipements destinés à la génération, l'émission et la réception d'Appels Sélectifs Numériques (ASN) dans le service mobile maritime en ondes hectométriques, en ondes hectométriq...
• NF EN 300338-2:2020 Caractéristiques techniques et méthodes de mesure pour les équipements destinés à la génération, l'émission et la réception d'Appels Sélectifs Numériques (ASN) dans le service mobile maritime en ondes hectométriques, en ondes hectométriq...
• NF EN 300338-7:2022 Caractéristiques techniques et méthodes de mesure pour les équipements destinés à la génération, l'émission et la réception d'Appels Sélectifs Numériques (ASN) dans le service mobile maritime en ondes hectométriques, en ondes hectométriq...
• NF X45-308:2000 Filter cartridges - Test methods - Verification of resistance to high temperatures.
• NF A92-130:2009 Vitreous and porcelain enamel finishes - Selection of test methods for vitreous and porcelain enamelled areas of articles.
• NF ISO 22383:2020 Sécurité et résilience - Authenticité, intégrité et confiance pour les produits et les documents - Lignes directrices pour la sélection et l'évaluation de la performance des solutions d'authentification pour les biens matériels
• NF EN 1093-1:2009 Sécurité des machines - Évaluation de l'émission de substances dangereuses véhiculées par l'air - Partie 1 : choix des méthodes d'essai
• NF ISO 13528:2022 Méthodes statistiques utilisées dans les essais d'aptitude par comparaison interlaboratoires
• NF X52-314:2020 Security and resilience - Authenticity, integrity and trust for products and documents - Guidelines for the selection and performance evaluation of authentication solutions for material goods
• XP CEN ISO/TS 23758:2021 Lignes directrices pour la validation des méthodes qualitatives de dépistage des résidus de médicaments vétérinaires dans le lait et les produits laitiers
• NF A92-130*NF EN ISO 4528:2015 Vitreous and porcelain enamel finishes - Guide to selection of test methods for vitreous and porcelain enamelled areas of articles
• FD P01-066*FD CEN/TR 15941:2010 Sustainability of construction works - Environmental product declarations - Methodology for selection and use of generic data
• NF EN 300338-8:2022 Caractéristiques techniques et méthodes de mesure pour les équipements destinés à la génération, la transmission et la réception d'Appels Sélectifs Numériques (ASN) dans le service maritime mobile en ondes hectométriques, en ondes hectomét...
• NF EN 300338-4:2017 Caractéristiques techniques et méthodes de mesure pour les équipements destinés à la génération, la transmission et la réception d'Appels Sélectifs Numériques (ASN) dans le service maritime mobile en ondes hectométriques, en ondes hectomét...
• NF EN 300338-1:2021 Caractéristiques techniques et méthodes de mesure pour les équipements destinés à la génération, la transmission et la réception d'Appels Sélectifs Numériques (ASN) dans le service maritime mobile en ondes hectométriques, en ondes hectomét...
• XP CEN/TS 17329-1:2019 Denrées alimentaires - Lignes directrices générales pour la validation des méthodes de PCR qualitative en temps réel - Partie 1 : validation intralaboratoire
• NF C93-742-3*NF EN 62739-3:2017 Test method for erosion of wave soldering equipment using molten lead free solder alloy - Part 3bn: selection guidance of erosion test methods
• NF T76-340-2*NF ISO 26842-2:2020 Adhesives - Test methods for the evaluation and selection of adhesives for indoor wood products - Part 2 : resistance to delamination in severe environments
• NF ISO 26842-2:2020 Adhésifs - Méthodes d'essai pour la sélection et l'évaluation des adhésifs destinés aux produits en bois utilisés à l'intérieur - Partie 2 : résistance à la délamination dans des environnements sévères
• NF EN 62739-3:2017 Méthode d'essai de l'érosion de l'équipement de brasage à la vague utilisant un alliage à braser sans plomb fondu - Partie 3 : document d'orientation pour le choix des méthodes d'essai d'érosion
• XP V03-329-1*XP CEN/TS 17329-1:2019 Foodstuffs - General guidelines for the validation of qualitative real-time PCR methods - Part 1 : single- laboratory validation
• NF E29-648-4*NF EN ISO 11114-4:2017 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4 : Test methods for selecting steels resistant to hydrogen embrittlement
• NF T76-340-1*NF ISO 26842-1:2020 Adhesives - Test methods for the evaluation and selection of adhesives for indoor wood products - Part 1 : resistance to delamination in non-severe environments

European Committee for Standardization (CEN), Selectivity in Method Validation

• EN ISO/TS 13004:2014 Sterilization of health care products - Radiation - Substantiation of selected sterilization dose: Method VDmaxSD
• CEN ISO/TS 23758:2021 Guidelines for the validation of qualitative screening methods for the detection of residues of veterinary drugs in milk and milk products (ISO/TS 23758:2021)
• EN 1093-1:1998 Safety of Machinery - Evaluation of the Emission of Airborne Hazardous Substances - Part 1: Selection of Test Methods
• PD CEN/TS 14425-1:2003 Advanced technical ceramics Test methods for determination of fracture toughness of monolithic ceramics Part 1:Guide to test method selection
• EN ISO 16140-3:2021 Microbiology of the food chain - Method validation - Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory (ISO 16140-3:2021)
• EN 1779:1999 Non-destructive testing - Leak testing - Criteria for method and technique selection
• EN ISO 4528:2022 Vitreous and porcelain enamel finishes - Selection of test methods for vitreous and porcelain enamelled areas of articles (ISO 4528:2022)
• EN 1093-1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1: Selection of test methods
• PD CEN/TR 15941:2010 Sustainability of construction works - Environmental product declarations - Methodology for selection and use of generic data
• EN ISO 4528:2015 Vitreous and porcelain enamel finishes - Guide to selection of test methods for vitreous and porcelain enamelled areas of articles
• CEN/TR 16176:2011 Characterization of waste - Screening methods for elemental composition by X-ray fluorescence spectrometry for on-site verification
• PD CEN/TS 17329-1:2021 Tracked Changes. Foodstuffs. General guidelines for the validation of qualitative real-time PCR methods. Single-laboratory validation
• HD 466.6 S2-1992 Methods of measurement for radio equipment used in the mobile services; part 6: selective-calling and data equipment (IEC 489-6:1987 + A1:1989)

International Organization for Standardization (ISO), Selectivity in Method Validation

• ISO/FDIS 24190 Biotechnology — Analytical methods — Risk-based approach for method selection and validation for rapid microbial detection in bioprocesses
• ISO 24190:2023 Biotechnology — Analytical methods — Risk-based approach for method selection and validation for rapid microbial detection in bioprocesses
• ISO 23380:2013 Selection of methods for the determination of trace elements in coal
• ISO 23380:2008 Selection of methods for the determination of trace elements in coal
• ISO/TS 16688:2017 Guidelines for the selection of coating types, tests and methods of assessing the performance of coated aluminium in architectural applications
• ISO/TS 23758:2021 Guidelines for the validation of qualitative screening methods for the detection of residues of veterinary drugs in milk and milk products
• ISO/TR 13425:2006 Guidelines for the selection of statistical methods in standardization and specification
• ISO/TR 13425:2003 Guidelines for the selection of statistical methods in standardization and specification
• ISO/TR 8363:1997 Measurement of liquid flow in open channels — General guidelines for selection of method
• ISO/TS 21231:2019 Water quality — Characterization of analytical methods — Guidelines for the selection of a representative matrix
• ISO/IEC Guide 43-2:1997 Proficiency testing by interlaboratory comparisons - Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies
• ISO/TR 9966:1989 Implants for surgery — Biocompatibility — Selection of biological test methods for materials and devices
• ISO/TS 21913:2022 Temperature verification method applied to dynamic fatigue testing
• ISO 16140-3:2021 Microbiology of the food chain - Method validation - Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory
• ISO 5963:1985 Documentation; Methods for examining documents, determining their subjects, and selecting indexing terms
• ISO 4528:2000 Vitreous and porcelain enamel finishes - Selection of test methods for vitreous and porcelain enamelled areas of articles
• ISO 13004:2022 Sterilization of health care products — Radiation — Substantiation of selected sterilization dose: Method VDmaxSD
• ISO 22383:2020 Security and resilience — Authenticity, integrity and trust for products and documents — Guidelines for the selection and performance evaluation of authentication solutions for material goods
• ISO 4528:2022 Vitreous and porcelain enamel finishes — Selection of test methods for vitreous and porcelain enamelled areas of articles
• ISO/TR 8550:1994 Guide for the selection of an acceptance sampling system, scheme or plan for inspection of discrete items in lots
• ISO 2605-3:1985 Steel products for pressure purposes; Derivation and verification of elevated temperature properties; Part 3 : An alternative procedure for deriving the elevated temperature yield or proof stress properties when data are limited
• ISO 4528:2015 Vitreous and porcelain enamel finishes - Guide to selection of test methods for vitreous and porcelain enamelled areas of articles
• ISO 16140-4:2020/DAmd 1 Microbiology of the food chain — Method validation — Part 4: Protocol for method validation in a single laboratory — Amendment 1: Validation of a larger test portion size for qualitative methods
• ISO 13528:2022 Statistical methods for use in proficiency testing by interlaboratory comparison
• ISO 10231:2003 Motorcycle tyres - Test methods for verifying tyre capabilities
• ISO 29042-1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1: Selection of test methods
• ISO 16140-4:2020/CD Amd 1 Microbiology of the food chain — Method validation — Part 4: Protocol for method validation in a single laboratory — Amendment 1: Annex H - Validation of larger test portion size for qualitative methods
• ISO/TS 27878:2023 Reproducibility of the level of detection (LOD) of binary methods in collaborative and in-house validation studies
• ISO/TR 17737:2012 Workplace atmospheres - Guidelines for selecting analytical methods for sampling and analysing isocyanates in air
• ISO/TR 17737:2007 Workplace air - Guidelines for selecting analytical methods for sampling and analysing isocyanates in air
• ISO 11114-4:2017 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting steels resistant to hydrogen embrittlement
• ISO/TR 16203:2016 Corrosion of metals and alloys - Guidelines for the selection of methods for particle-free erosion corrosion testing in flowing liquids
• ISO 26842-1:2013 Adhesives - Test methods for the evaluation and selection of adhesives for indoor wood products - Part 1: Resistance to delamination in non-severe environments
• ISO/TS 23758:2021 | IDF/RM 251 Guidelines for the validation of qualitative screening methods for the detection of residues of veterinary drugs in milk and milk products
• ISO/TS 23758:2021 | IDF/RM 251:2021 Guidelines for the validation of qualitative screening methods for the detection of residues of veterinary drugs in milk and milk products
• ISO/TS 16393:2019 Molecular biomarker analysis — Determination of the performance characteristics of qualitative measurement methods and validation of methods
• ISO/TR 5601:2023 Paints and varnishes — Determination of volatile organic compound (VOC) and/or semi-volatile organic compound (SVOC) content — Best practices for the selection of test methods

British Standards Institution (BSI), Selectivity in Method Validation

• BS ISO 24190:2023 Biotechnology. Analytical methods. Risk-based approach for method selection and validation for rapid microbial detection in bioprocesses
• BS ISO 23380:2013 Selection of methods for the determination of trace elements in coal
• BS EN ISO 20813:2022 Foodstuffs. Principles of selection and criteria of validation for varietal identification methods using specific nucleic acid
• BS EN 1093-1:1999 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Selection of test methods
• BS PD CEN ISO/TS 23758:2021 Guidelines for the validation of qualitative screening methods for the detection of residues of veterinary drugs in milk and milk products
• BS DD CEN/TS 14425-1:2003 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Guide to test method selection
• DD CEN/TS 14425-1:2003 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Guide to test method selection
• BS 6548-3:1992 Maintainability of equipment - Guide to maintainability, verification and the collection, analysis and presentation of maintainability data
• BS 3424-13:1999 Testing coated fabrics. Guide to the selection of methods for colour fastness to light testing
• BS EN 13238:2001 Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates
• PD ISO/TS 21231:2019 Water quality. Characterization of analytical methods. Guidelines for the selection of a representative matrix
• BS EN 62137-3:2012 Electronics assembly technology. Selection guidance of environmental and endurance test methods for solder joints
• BS EN 17479:2021 Hearing protectors. Guidance on selection of individual fit testing methods
• PD ISO/TR 16203:2016 Corrosion of metals and alloys. Guidelines for the selection of methods for particle-free erosion corrosion testing in flowing liquids
• PD ISO/TS 16688:2017 Guidelines for the selection of coating types, tests and methods of assessing the performance of coated aluminium in architectural applications
• BS EN ISO 16140-3:2021 Microbiology of the food chain. Method validation. Protocol for the verification of reference methods and validated alternative methods in a single laboratory
• BS ISO 17381:2003 Water quality. Selection and application of ready-to-use test kit methods in water analysis
• BS EN ISO 16140-4:2020 Microbiology of the food chain. Method validation - Protocol for method validation in a single laboratory
• BS EN 1093-1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances Part 1: Selection of test methods
• BS 7530-2:1995 Methods for froth flotation testing of hard coal - Evaluation of flotation characteristics
• BS 903-1:1995 Physical testing of rubber. Guide to the selection and use of methods of test for rubber
• 20/30395217 DC BS EN 17479. Hearing protectors. Guidance on selection of individual fit testing methods
• BS PD CEN/TS 17329-1:2021 Foodstuffs. General guidelines for the validation of qualitative real-time PCR methods. Single-laboratory validation
• BS EN ISO 4528:2015 Vitreous and porcelain enamel finishes. Guide to selection of test methods for vitreous and porcelain enamelled areas of articles
• BS EN ISO 4528:2022 Tracked Changes. Vitreous and porcelain enamel finishes. Selection of test methods for vitreous and porcelain enamelled areas of articles
• BS ISO 26842-2:2020 Adhesives. Test methods for the evaluation and selection of adhesives for indoor wood products - Resistance to delamination in severe environments
• BS ISO 13528:2022 Statistical methods for use in proficiency testing by interlaboratory comparison
• BS ISO 22383:2020 Security and resilience. Authenticity, integrity and trust for products and documents. Guidelines for the selection and performance evaluation of authentication solutions for material goods
• BS ISO 26842-2:2013 Adhesives. Test methods for the evaluation and selection of adhesives for indoor wood products. Resistance to delamination in severe environments
• BS EN 15051-1:2013 Workplace exposure. Measurement of the dustiness of bulk materials. Requirements and choice of test methods
• BS 5700:2015 Tracked Changes. Guide to the selection of charting methods and capability assessment for use in statistical process control
• BS ISO 26842-1:2020 Adhesives. Test methods for the evaluation and selection of adhesives for indoor wood products - Resistance to delamination in non-severe environments
• BS EN ISO 18857-1:2006 Water quality - Determination of selected alkylphenols - Method for non-filtered samples using liquid-liquid extraction and gas chromatography with mass selective detection
• PD ISO/TS 27878:2023 Reproducibility of the level of detection (LOD) of binary methods in collaborative and in-house validation studies
• BS PD CEN/TR 15941:2010 Sustainability of construction works — Environmental product declarations — Methodology for selection and use of generic data
• BS EN ISO 22032:2007 Water quality. Determination of selected polybrominated diphenyl ethers in sediment and sewage sludge. Method using extraction and gas chromatography/mass spectrometry
• BS EN 62739-3:2017 Test method for erosion of wave soldering equipment using molten lead-free solder alloy. - Part 3: Selection guidance of erosion test methods
• BS PD ISO/TR 16203:2016 Corrosion of metals and alloys. Guidelines for the selection of methods for particle-free erosion corrosion testing in flowing liquids
• BS EN ISO 11114-4:2007 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Test methods for selecting metallic materials resistant to hydrogen embrittlement
• BS EN ISO 11114-4:2017 Tracked Changes. Transportable gas cylinders. Compatibility of cylinder and valve materials with gas contents. Test methods for selecting steels resistant to hydrogen embrittlement
• PD CEN ISO/TS 23758:2021 Guidelines for the validation of qualitative screening methods for the detection of residues of veterinary drugs in milk and milk products

American Society for Testing and Materials (ASTM), Selectivity in Method Validation

• ASTM E432-91(1997) Standard Guide for Selection of a Leak Testing Method
• ASTM E432-91(2011) Standard Guide for Selection of a Leak Testing Method
• ASTM D4043-96(2004) Standard Guide for Selection of Aquifer Test Method in Determining Hydraulic Properties by Well Techniques
• ASTM D4043-96e1 Standard Guide for Selection of Aquifer-Test Method in Determining of Hydraulic Properties by Well Techniques
• ASTM D4043-96(2010)e1 Standard Guide for Selection of Aquifer Test Method in Determining Hydraulic Properties by Well Techniques
• ASTM D6434-12 Standard Guide for the Selection of Test Methods for Flexible Polypropylene Geomembranes
• ASTM D6434-99 Standard Guide for the Selection of Test Methods for Flexible Polypropylene (fPP) Geomembranes
• ASTM D6434-04 Standard Guide for the Selection of Test Methods for Flexible Polypropylene (fPP) Geomembranes
• ASTM D7011-10 Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection
• ASTM D6345-98 Standard Guide for Selection of Methods for Active, Integrative Sampling of Volatile Organic Compounds in Air
• ASTM D6345-98(2004)e1 Standard Guide for Selection of Methods for Active, Integrative Sampling of Volatile Organic Compounds in Air
• ASTM D4208-02(2007) Standard Test Method for Total Chlorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode Method
• ASTM D4208-88(2002) Standard Test Method for Total Chlorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode Method
• ASTM D4208-02 Standard Test Method for Total Chlorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode Method
• ASTM D7700-12 Standard Guide for Selecting Test Methods for Geomembrane Seams
• ASTM D7011-04 Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection
• ASTM D6434-12(2018) Standard Guide for the Selection of Test Methods for Flexible Polypropylene Geomembranes
• ASTM D2482-97(2007) Standard Test Method for Surface Strength of Paper (Wax Pick Method)
• ASTM D2482-97(2002) Standard Test Method for Surface Strength of Paper (Wax Pick Method)
• ASTM D2482-97 Standard Test Method for Surface Strength of Paper (Wax Pick Method)
• ASTM D5154-91 Standard Test Method for Determining the Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
• ASTM D5623-94(2004)e1 Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection
• ASTM D7700-22 Standard Guide for Selecting Test Methods for Geomembrane Seams
• ASTM D7700-15 Standard Guide for Selecting Test Methods for Geomembrane Seams
• ASTM D5819-99 Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability
• ASTM D5819-21 Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability
• ASTM D5819-18 Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability
• ASTM D5819-22 Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability
• ASTM D5819-05(2016) Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability
• ASTM D5154-10 Standard Test Method for Determining Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
• ASTM F2277-03 Standard Test Methods for Evaluating Design and Performance Characteristics of Selectorized Strength Equipment
• ASTM D5623-94(2009) Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection
• ASTM D4208-18 Standard Test Method for Total Chlorine in Coal by the Oxygen Vessel Combustion/Ion Selective Electrode Method
• ASTM D4208-88(1997) Standard Test Method for Total Chlorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode Method
• ASTM D4208-02e1 Standard Test Method for Total Chlorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode Method
• ASTM D4208-13 Standard Test Method for Total Chlorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode Method
• ASTM D4208-19 Standard Test Method for Total Chlorine in Coal by the Oxygen Vessel Combustion/Ion Selective Electrode Method
• ASTM D5819-05 Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability
• ASTM F748-98 Standard Practice for Selecting Generic Biological Test Methods for Materials and Devices
• ASTM D6917-03 Standard Guide for Selection of Test Methods for Prefabricated Vertical Drains (PVD)
• ASTM D5599-17 Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection
• ASTM D5599-18 Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection
• ASTM D5819-05(2012) Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability
• ASTM D4822-88(2008) Standard Guide for Selection of Methods of Particle Size Analysis of Fluvial Sediments (Manual Methods)
• ASTM D5599-22 Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection
• ASTM D3761-96 Standard Test Method for Total Fluorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode Method
• ASTM D3761-96(2002) Standard Test Method for Total Fluorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode Method
• ASTM D3761-10 Standard Test Method for Total Fluorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode Method
• ASTM D5154-03 Standard Test Method for Determining Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
• ASTM D5154-05 Standard Test Method for Determining Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
• ASTM D5599-15 Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection
• ASTM D4978-95 Standard Test Methods for Screening of Reactive Sulfides in Waste
• ASTM D4978-95(2001) Standard Test Methods for Screening of Reactive Sulfides in Waste
• ASTM D4978-16 Standard Test Methods for Screening of Reactive Sulfides in Waste
• ASTM D8509/D8509M-23 Standard Guide for Test Method Selection and Test Specimen Design for Bolted Joint Related Properties
• ASTM D6629-01 Standard Guide for Selection of Methods for Estimating Soil Loss by Erosion
• ASTM D4765-13(2018) Standard Test Method for Measurement of Fluorides in Workplace Atmospheres by Ion-Selective Electrodes
• ASTM D4765-13 Standard Test Method for Measurement of Fluorides in Workplace Atmospheres by Ion-Selective Electrodes
• ASTM D6345-98(2003) Standard Guide for Selection of Methods for Active, Integrative Sampling of Volatile Organic Compounds in Air
• ASTM D7011-15 Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection
• ASTM D7011-15(2019) Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection
• ASTM D6917-03(2007) Standard Guide for Selection of Test Methods for Prefabricated Vertical Drains (PVD)
• ASTM D6917-16 Standard Guide for Selection of Test Methods for Prefabricated Vertical Drains (PVD)
• ASTM D6917-16(2022) Standard Guide for Selection of Test Methods for Prefabricated Vertical Drains (PVD)
• ASTM D5154/D5154M-18 Standard Test Method for Determining Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
• ASTM D6345-10 Standard Guide for Selection of Methods for Active, Integrative Sampling of Volatile Organic Compounds in Air
• ASTM D7011-10a Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection
• ASTM F1870-99 Standard Guide for Selection of Fire Test Methods for the Assessment of Upholstered Furnishings in Detention and Correctional Facilities
• ASTM F942-93 Standard Guide for Selection of Test Methods for Interlayer Materials for Aerospace Transparent Enclosures
• ASTM D6685-01(2015) Standard Guide for the Selection of Test Methods for Fabrics Used for Fabric Formed Concrete (FFC)
• ASTM D6455-99 Standard Guide for the Selection of Test Methods for Prefabricated Bituminous Geomembranes (PBGM)
• ASTM D6917-03(2011) Standard Guide for Selection of Test Methods for Prefabricated Vertical Drains (PVD)
• ASTM D7106/D7106M-05(2015)e1 Standard Guide for Selection of Test Methods for Ethylene Propylene Diene Terpolymer (EPDM) Geomembranes
• ASTM F1870-05 Standard Guide for Selection of Fire Test Methods for the Assessment of Upholstered Furnishings in Detention and Correctional Facilities
• ASTM F1870-11 Standard Guide for Selection of Fire Test Methods for the Assessment of Upholstered Furnishings in Detention and Correctional Facilities
• ASTM F1870-22 Standard Guide for Selection of Fire Test Methods for the Assessment of Upholstered Furnishings in Detention and Correctional Facilities
• ASTM D4978-95(2007) Standard Test Methods for Screening of Reactive Sulfides in Waste
• ASTM D5114-90(1998) Standard Test Method for Laboratory Froth Flotation of Coal in a Mechanical Cell
• ASTM D5114-90(2004) Standard Test Method for Laboratory Froth Flotation of Coal in a Mechanical Cell
• ASTM D5923-18 Standard Guide for Selection of Kriging Methods in Geostatistical Site Investigations
• ASTM D6286-98(2006) Standard Guide for Selection of Drilling Methods for Environmental Site Characterization
• ASTM D6286-98 Standard Guide for Selection of Drilling Methods for Environmental Site Characterization
• ASTM D3327-79e1 Method for Analysis of Selected Elements in Waterborne Oils
• ASTM D6685-01(2008) Standard Guide for the Selection of Test Methods for Fabrics Used for Fabric Formed Concrete (FFC)
• ASTM D5114-90(2010) Standard Test Method for Laboratory Froth Flotation of Coal in a Mechanical Cell
• ASTM D6685-01 Standard Guide for the Selection of Test Methods for Fabrics Used for Fabric Formed Concrete
• ASTM F1870-16 Standard Guide for Selection of Fire Test Methods for the Assessment of Upholstered Furnishings in Detention and Correctional Facilities
• ASTM D6399-04 Standard Guide for Selecting Instruments and Methods for Measuring Air Quality In Aircraft Cabins
• ASTM D6455-05 Standard Guide for the Selection of Test Methods for Prefabricated Bituminous Geomembranes (PBGM)
• ASTM D5623-94(1999)e1 Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection
• ASTM D5623-94(2014) Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection
• ASTM D4980-89 Standard Test Methods for Screening of pH in Waste
• ASTM D4980-89(2003) Standard Test Methods for Screening of pH in Waste
• ASTM F942-02(2008) Standard Guide for Selection of Test Methods for Interlayer Materials for Aerospace Transparent Enclosures
• ASTM C1302-95 Standard Guide for Selection and Use of Keywords for Thermal Insulation Test Methods and Standards
• ASTM F748-16 Standard Practice for Selecting Generic Biological Test Methods for Materials and Devices
• ASTM C1302-04(2011) Standard Guide for Selection and Use of Keywords for Thermal Insulation Test Methods and Standards
• ASTM E1185-02 Standard Guide for Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems
• ASTM D6399-10 Standard Guide for Selecting Instruments and Methods for Measuring Air Quality In Aircraft Cabins
• ASTM E1185-12 Standard Guide for Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems
• ASTM C1302-95(2002) Standard Guide for Selection and Use of Keywords for Thermal Insulation Test Methods and Standards
• ASTM B697-88(2005) Standard Guide for Selection of Sampling Plans for Inspection of Electrodeposited Metallic and Inorganic Coatings
• ASTM C1302-04 Standard Guide for Selection and Use of Keywords for Thermal Insulation Test Methods and Standards
• ASTM C1058-03(2008) Standard Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation
• ASTM E1850-04(2012) Standard Guide for Selection of Resident Species as Test Organisms for Aquatic and Sediment Toxicity Tests
• ASTM D6030-96(2002) Standard Guide for Selection of Methods for Assessing Ground Water or Aquifer Sensitiviy and Vulnerability
• ASTM D6030-96e1 Standard Guide for Selection of Methods for Assessing Ground Water or Aquifer Sensitiviy and Vulnerability
• ASTM D6030-96(2008) Standard Guide for Selection of Methods for Assessing Ground Water or Aquifer Sensitiviy and Vulnerability
• ASTM F748-06(2010) Standard Practice for Selecting Generic Biological Test Methods for Materials and Devices
• ASTM E1185-07e1 Standard Guide for Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems
• ASTM E3163-18 Standard Guide for Selection and Application of Analytical Methods and Procedures Used during Sediment Corrective Action
• ASTM D5623-19 Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection
• ASTM D5987-96(2002) Standard Test Method for Total Fluorine in Coal and Coke by Pyrohydrolytic Extraction and Ion Selective Electrode or Ion Chromatograph Methods
• ASTM D5987-96 Standard Test Method for Total Fluorine in Coal and Coke by Pyrohydrolytic Extraction and Ion Selective Electrode or Ion Chromatograph Methods
• ASTM D5987-96(2007) Standard Test Method for Total Fluorine in Coal and Coke by Pyrohydrolytic Extraction and Ion Selective Electrode or Ion Chromatograph Methods
• ASTM F942-18(2023)e1 Standard Guide for Selection of Test Methods for Interlayer Materials for Aerospace Transparent Enclosures
• ASTM E2232-02 Standard Guide for Selection and Use of Mathematical Methods for Calculating Absorbed Dose in Radiation Processing Applications
• ASTM E1185-07 Standard Guide for Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems
• ASTM F1277-02(2009) Standard Test Method for Determination of Leachable Chloride in Packing and Gasketing Materials by Ion-Selective Electrode Technique
• ASTM E502-21a Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods
• ASTM D5831-96 Standard Test Method for Screening Fuels in Soils
• ASTM D5831-96(2001) Standard Test Method for Screening Fuels in Soils
• ASTM D5831-03(2008) Standard Test Method for Screening Fuels in Soils
• ASTM D6030-15 Standard Guide for Selection of Methods for Assessing Groundwater or Aquifer Sensitivity and Vulnerability
• ASTM D8141-17 Standard Guide for Selecting Volatile Organic Compounds (VOCs) and Semi-Volatile Organic Compounds (SVOCs) Emission Testing Methods to Determine Emission Parameters for Modeling of Indoor Environments
• ASTM F942-02 Standard Guide for Selection of Test Methods for Interlayer Materials for Aerospace Transparent Enclosures
• ASTM F942-02(2013) Standard Guide for Selection of Test Methods for Interlayer Materials for Aerospace Transparent Enclosures
• ASTM E2232-20 Standard Guide for Selection and Use of Mathematical Methods for Calculating Absorbed Dose in Radiation Processing Applications
• ASTM E2232-16 Standard Guide for Selection and Use of Mathematical Methods for Calculating Absorbed Dose in Radiation Processing Applications
• ASTM D4981-95 Standard Test Method for Screening of Oxidizers in Waste
• ASTM D4981-95(2003) Standard Test Method for Screening of Oxidizers in Waste
• ASTM D4981-08 Standard Test Method for Screening of Oxidizers in Waste
• ASTM D4981-12 Standard Test Method for Screening of Oxidizers in Waste
• ASTM E2232-21 Standard Guide for Selection and Use of Mathematical Methods for Calculating Absorbed Dose in Radiation Processing Applications
• ASTM D5114-90 Standard Test Method for Laboratory Froth Flotation of Coal in a Mechanical Cell
• ASTM D5114/D5114M-90(2018)e1 Standard Test Method for Laboratory Froth Flotation of Coal in a Mechanical Cell
• ASTM D5058-90(2007) Standard Test Methods for Compatibility of Screening Analysis of Waste
• ASTM G156-97 Standard Practice for Selecting and Characterizing Weathering Reference Materials Used to Monitor Consistency of Conditions in an Exposure Test
• ASTM D5928-96(2010)e1 Standard Test Method for Screening of Waste for Radioactivity
• ASTM E502-07e1 Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods
• ASTM E2471-05(2016) Standard Test Method for Using Seeded-Agar for the Screening Assessment of Antimicrobial Activity In Carpets
• ASTM D5987-96(2015) Standard Test Method for Total Fluorine in Coal and Coke by Pyrohydrolytic Extraction and Ion Selective Electrode or Ion Chromatograph Methods
• ASTM D6196-03 Standard Practice for Selection of Sorbents, Sampling, and Thermal Desorption Analysis Procedures for Volatile Organic Compounds in Air
• ASTM D6196-03(2009) Standard Practice for Selection of Sorbents, Sampling, and Thermal Desorption Analysis Procedures for Volatile Organic Compounds in Air
• ASTM E502-07 Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods
• ASTM D7106-05 Standard Guide for Selection of Test Methods for Ethylene Propylene Diene Terpolymer (EPDM) Geomembranes
• ASTM B697-88(2010) Standard Guide for Selection of Sampling Plans for Inspection of Electrodeposited Metallic and Inorganic Coatings
• ASTM D5886-95(2023) Standard Guide for Selection of Test Methods to Determine Rate of Fluid Permeation Through Geomembranes for Specific Applications
• ASTM E2918-18 Standard Test Method for Performance Validation of Thermomechanical Analyzers
• ASTM E2918-18a Standard Test Method for Performance Validation of Thermomechanical Analyzers
• ASTM E2918-13 Standard Test Method for Performance Validation of Thermomechanical Analyzers
• ASTM E2918-23 Standard Test Method for Performance Validation of Thermomechanical Analyzers
• ASTM E1108-86(2004) Standard Test Method for Determination of the Recovery of a Product in a Materials Separation Device
• ASTM D8025-16 Standard Test Method for Determination of Select Pesticides in Water by Multiple Reaction Monitoring Liquid Chromatography Tandem Mass Spectrometry
• ASTM E2471-05 Standard Test Method for Using Seeded-Agar for the Screening Assessment of Antimicrobial Activity In Carpets
• ASTM E2471-05(2011)e1 Standard Test Method for Using Seeded-Agar for the Screening Assessment of Antimicrobial Activity In Carpets
• ASTM D4043-17 Standard Guide for Selection of Aquifer Test Method in Determining Hydraulic Properties by Well Techniques
• ASTM E2252-18 Standard Practice for Selection of Lead Hazard Reduction Methods for Identified Risks in Residential Housing or Child Occupied Facilities
• ASTM D5886-95(2018) Standard Guide for Selection of Test Methods to Determine Rate of Fluid Permeation Through Geomembranes for Specific Applications
• ASTM E502-07(2013) Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods
• ASTM G156-02 Standard Practice for Selecting and Characterizing Weathering Reference Materials Used to Monitor Consistency of Conditions in an Exposure Test

Indonesia Standards, Selectivity in Method Validation

• SNI 06-6876-2002 Test methods of ammonia content in water by ion selective electrode
• SNI 19-6744-2002 Procedure for test method selection of aquiver hydraulic properties buy using of well technique

Professional Standard - Hygiene , Selectivity in Method Validation

• WS/T 30-1996 Urine.Determination of fluoride.Ion specifi electrode method
• WS/T 27-1996 Urine.Separate Determination of organic,inorganic and total mercury.Selective reduction cold atomic absorption spectrometric method

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Selectivity in Method Validation

• GB/T 13083-2002 Determination of fluorine in feed--Ion selective electrode method
• GB/T 32954-2016 Determination of fluoride content for fertilizers.Ion selective electrode method
• GB/T 21057-2007 Inorganic chemicals for industrial use- General method for determination of fluorine content- Ion selective electrode method
• GB 14103-1993 Halon fire extinguishing systems performance reguirements and test methods for selector valves
• GB 11848.6-1989 Determination of Fluorine in Uranium Ore Concentrates by Ion Selective Electrode Method
• GB/T 11848.6-1989 Determination of fluoride in uranium ore concentrate by ion-selective electrode
• GB/T 2465-1996 Pyrites and concentrate--Determination of fluorine content Ion-selective electrode method
• GB/T 1872-1995 Phosphate rock and concentrate--Detrmination of fluorine content--Specific ion electrode method
• GB/T 16030-1995 Workplace air--Determination of hydrogen fluoride and fluorides--Ion selective electrode method
• GB/T 20166.2-2006 Chemical analysis methods of rare earth polishing powder - Determination fluorine content - Ion selective electrode analysis
• GB/T 1878-1995 Phosphate rock and concentrate--Determination of iodine content--Spectrophotometric and specific ion electrode methods
• GB/T 13369-1992 Determination of chlorine in uranium dioxide powders and pellets by pyrohydrolysis ion-selective electrode method
• GB/T 11844-1989 Uranium dioxide powder and pellets--Determination of fluorine--Pyrohydrolysis ion-selective electrode method
• GB/T 11844-2015 Determination of fluorine and chlorine in uranium dioxide powder and pellets.Pyrohydrolysis ion-selective electrode method
• GB/T 23273.6-2009 Methods for chemical analysis of cobalt oxalate.Part 6:Determination of chlorine ion content.Ion selective electrode method
• GB/T 20166.2-2012 Chemical analysis methods of rare earth polishing powder.Part 2:Determination fluorine content.Ion selective electrode analysis
• GB/T 12690.16-2010 Chemical analysis methods of non-rare earth impurities in rare earth metals and the oxides—Part 16:Determination of fluorine content—Ion selective electrode analysis
• GB/T 25749.1-2010 Safety of machinery.Evaluation of the emission of airborne hazardous substances.Part 1:Selection of test methods

国家市场监督管理总局、中国国家标准化管理委员会, Selectivity in Method Validation

• GB/T 13083-2018 Determination of fluorine in feeds—Ion selective electrode method
• GB/T 38168-2019 Vitreous and porcelain enamel finishes—Guide to selection of test methods for vitreous and porcelain enamelled areas of articles

ZA-SANS, Selectivity in Method Validation

• SANS 13425:2005 Guidelines for the selection of statistical methods in standardization and specification

Standard Association of Australia （SAA）, Selectivity in Method Validation

• AS ISO 13425:2004 Guidelines for the selection of statistical methods in standardization and specification
• AS 2331.0:2006 Methods of test for metallic and related coatings - Method selection guide
• AS 2313.0:2006 Methods of test for single sided and double sided pressure-sensitive adhesive tape - Method selection guide
• AS 4323.1:2021 Stationary source emissions, Method 1: Selection of sampling positions and measurement of velocity in stacks
• HB 18.43.2-1998 Guidelines for third-party certification and accreditation - Guide 43 - Proficiency testing by interlaboratory comparisons - Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies
• AS 16140.3:2022 Microbiology of the food chain — Method validation, Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory (ISO 16140-3:2021, MOD)
• AS 2300.2.3:2008
• AS 1289.1.4.1:1998(R2013)
• AS 1289.1.4.2:1998(R2013)
• AS 2839:1988 Colour television receivers - General requirements and selected performance parameters - Limits and methods of measurement
• AS 2300.2.3:1981 Methods of chemical and physical testing for the dairying industry - Liquid milks - Determination of the iodide content of milk - Selective ion electrode method

Danish Standards Foundation, Selectivity in Method Validation

• DS/ISO/TS 23758:2021 Guidelines for the validation of qualitative screening methods for the detection of residues of veterinary drugs in milk and milk products
• DS/CEN ISO/TS 23758:2021 Guidelines for the validation of qualitative screening methods for the detection of residues of veterinary drugs in milk and milk products (ISO/TS 23758:2021)
• DS/EN 1093-1:2009 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1: Selection of test methods
• DS/CEN/TS 14425-1:2003 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 1: Guide to test method selection
• DS/EN 62137-3:2012 Electronics assembly technology - Part 3: Selection guidance of environmental and endurance test methods for solder joints
• DS/ISO 16140-3:2021 Microbiology of the food chain — Method validation — Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory
• DS/ISO 17381:2007 Water quality - Selection and application of ready-to-use test kit methods in water analysis
• DS/EN ISO 16140-3:2021 Microbiology of the food chain – Method validation – Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory (ISO 16140-3:2021)
• DS/EN ISO 4528:2009 Vitreous and porcelain enamel finishes - Selection of test methods for vitreous and porcelain enamelled areas of articles
• DS/ENV 1006:1993 Advanced technical ceramics. Methods of testing monolithic ceramics. Guidance on the sampling and selection of test pieces
• DS/ISO 13528:2005 Statistical methods for use in proficiency testing by interlaboratory comparisons
• DS/EN ISO 17402:2011 Soil quality - Requirements and guidance for the selection and application of methods for the assessment of bioavailability of contaminants in soil and soil materials
• DS/CEN/TR 15941:2010 Sustainability of construction works - Environmental product declarations - Methodology for selection and use of generic data
• DS/EN 14880:2005 Surface active agents - Determination of inorganic sulphate content in anionic surface active agents - Potentiometric lead selective electrode titration method
• DS/CEN/TR 16176:2012 Characterization of waste - Screening methods for elemental composition by X-ray fluorescence spectrometry for on-site verification
• DS/CEN/TS 17329-1:2021 Foodstuffs – General guidelines for the validation of qualitative real-time PCR methods – Part 1: Single-laboratory validation

IT-UNI, Selectivity in Method Validation

• UNI CEN ISO/TS 23758:2021 Guidelines for the validation of qualitative screening methods for the detection of residues of veterinary drugs in milk and milk products
• UNI CEN/TS 17329-1-2021 Foodstuffs - General guidelines for the validation of qualitative real-time PCR methods - Part 1: Single-laboratory validation

Group Standards of the People's Republic of China, Selectivity in Method Validation

• T/QGCML 312-2022 A technical method for selectively extracting salt from high-salt organic wastewater
• T/CAQI 253-2022 Selected purification technology for drinking water treatment units requirements and test methods
• T/CICEIA /CAMS4-2020 Diesel engine - Test method of ammonia uniformity for SCR converter

Professional Standard - Energy, Selectivity in Method Validation

• DL/T 2354-2021 Measuring method of pyrolysis rate of urea in flue gas denitrification system by selective catalytic reduction method Ion selective electrode method

Korean Agency for Technology and Standards (KATS), Selectivity in Method Validation

• KS A ISO/IEC GUIDE 43-2-2002(2012) Proficiency testing by interlaboratory comparisons－Part 2：Selection and use of proficiency testing schemes by laboratory accreditation bodies
• KS B 6399-2003 Performance evaluation method for NOx removal facilitiesby selective catalytic reduction
• KS I ISO 17381-2010(2015) Water quality－Selection and application of ready-to-use test kit methods in water analysis
• KS C IEC 62137-3-2012(2022) Electronics assembly technology－Selection guidance of environmental and endurance test methods for solder joints
• KS F 2587-2010(2020) Standard test method for chloride ion in fresh concrete using a chloride ion-selective electrode method
• KS C IEC 62137-3-2012(2017) Electronics assembly technology－Selection guidance of environmental and endurance test methods for solder joints
• KS C IEC 62137-3:2012 Electronics assembly technology－Selection guidance of environmental and endurance test methods for solder joints
• KS A ISO/IEC GUIDE 43-2:2002 Proficiency testing by interlaboratory comparisons-Part 2:Selection and use of proficiency testing schemes by laboratory accreditation bodies
• KS A ISO/IEC GUIDE 43-2:2013 Proficiency testing by interlaboratory comparisons－Part 2：Selection and use of proficiency testing schemes by laboratory accreditation bodies
• KS D ISO 2142-2002(2007) Wrought aluminium, magnesium and their alloys－Selection of specimens and test pieces for mechanical testing
• KS M ISO 26842-1-2014(2019) Adhesives — Test methods for the evaluation and selection of adhesives for indoor wood products — Part 1: Resistance to delaminaion in non-severe environments
• KS F 2587-2010 Standard test method for chloride ion in fresh concrete using a chloride ion-selective electrode method
• KS X ISO 5963:2003 Documentation-Methods for examining documents, determining their subjects, and selecting indexing terms
• KS X ISO 5963:2013 Documentation－Methods for examining documents, determining their subjects, and selecting indexing terms
• KS M ISO 10231:2021 Motorcycle tyres — Test methods for verifying tyre capabilties
• KS M ISO 10231:2010 Motorcycle tyres－Test methods for verifying tyre capabilities
• KS D ISO 2605-3:2004 Steel products for pressure purposes Derivation and verification of elevated temperature properties Part 3 An alternative procedure for deriving the elevated temperature yield or proof stress properties when data are limited
• KS D ISO 2605-3:2013 Steel products for pressure purposes Derivation and verification of elevated temperature properties Part 3 An alternative procedure for deriving the elevated temperature yield or proof stress properties when data are limited
• KS I ISO 17737:2010 Workplace air-Guidelines for selecting analytical methods for sampling and analysing ioscyanates in air
• KS I ISO 17737:2014 Workplace air — Guidelines for selecting analytical methods for sampling and analysing isocyanates in air
• KS I ISO 17737:2019 Workplace atmoshperes — Guidelines for selecting analytical methods for sampling and analysing isocyanates in air
• KS K 0936-2022 Geotextiles and geotextile-related products — Screening test method for determining the resistance to hydrolysis in water

未注明发布机构, Selectivity in Method Validation

• BS ISO/TR 8363:1997(1999) Measurement of liquid flow in open channels — General guidelines for the selection of method

GOSTR, Selectivity in Method Validation

• GOST R 57903-2017 Photovoltaic systems. Stand-alone pumping systems for water supply. Performance determination. Selection and verification
• GOST ISO 11114-4-2017 Transportable gas cylinders. Compatibility of cylinder and valve materials with gas contents. Part 4. Test methods for selecting steels resistant to hydrogen embrittlement

German Institute for Standardization, Selectivity in Method Validation

• DIN EN 1779:1999 Non-destructive testing - Leak testing - Criteria for the method and technique selection; German version EN 1779:1999
• DIN V 55394-2:2000 Proficiency testing by interlaboratory comparisons - Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies (ISO/IEC Guide 43-2:1997)
• DIN EN 16123:2013 Characterization of waste - Guidance on selection and application of screening methods; German version EN 16123:2013
• DIN CEN/TS 14425-1:2003 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 1: Guide to test method selection; German version CEN/TS 14425-1:2003
• DIN EN 17479:2022-01 Hearing protectors - Guidance on selection of individual fit testing methods; German version EN 17479:2021
• DIN CEN/TS 14425-1:2003-11 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 1: Guide to test method selection; German version CEN/TS 14425-1:2003
• DIN EN ISO 16140-3:2021-06 Microbiology of the food chain - Method validation - Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory (ISO 16140-3:2021); German version EN ISO 16140-3:2021
• DIN 10198-2:1992 Microbiological analysis of milk; determination of presumptive Bacillus cereus; method with selective enrichment
• DIN EN 1093-1:2009-02 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1: Selection of test methods; German version EN 1093-1:2008 / Note: DIN EN 1093-1 (1998-11) remains valid alongside this standard until 2009-12-28.
• DIN EN ISO 4528:2009 Vitreous and porcelain enamel finishes - Selection of test methods for vitreous and porcelain enamelled areas of articles (ISO 4528:2000); English version of DIN EN ISO 4528:2009-04
• DIN ISO 13528:2020-09 Statistical methods for use in proficiency testing by interlaboratory comparison (ISO 13528:2015, Corrected version 2016-10-15); Text in German and English
• DIN EN 1093-1:2009 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1: Selection of test methods; English version of DIN EN 1093-1:2009-02
• DIN EN ISO 16140-3:2018 Microbiology of the food chain - Method validation - Part 3: Protocol for the verification of reference and validated alternative methods implemented in a single laboratory (ISO/DIS 16140-3:2017); German and English version prEN ISO 16140-3:2017
• DIN CEN/TR 15941:2010-11*DIN SPEC 18941:2010-11 Sustainability of construction works - Environmental product declarations - Methodology for selection and use of generic data; German version CEN/TR 15941:2010 / Note: To be replaced by DIN EN 15941 (2021-07), DIN EN 15941 (2022-11).
• DIN CEN/TS 17329-1:2021-09 Foodstuffs - General guidelines for the validation of qualitative real-time PCR methods - Part 1: Single-laboratory validation; German version CEN/TS 17329-1:2021
• DIN EN ISO 11114-4:2017-09 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting steels resistant to hydrogen embrittlement (ISO 11114-4:2017); German version EN ISO 11114-4:2017
• DIN CEN ISO/TS 23758:2022-02 Guidelines for the validation of qualitative screening methods for the detection of residues of veterinary drugs in milk and milk products (ISO/TS 23758:2021); German version CEN ISO/TS 23758:2021

AT-ON, Selectivity in Method Validation

• ONR CEN ISO/TS 23758:2021 Guidelines for the validation of qualitative screening methods for the detection of residues of veterinary drugs in milk and milk products (ISO/DTS 23758:2021)
• OENORM EN ISO 16140-3:2021 Microbiology of the food chain - Method validation - Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory (ISO 16140-3:2021)
• ONORM ENV 1006-1993 Advanced technical ceramics - Methods of testing monolithic ceramics - Guidance on the sampling and selection of test pieces
• ONR CEN/TS 17329-1-2021 Foodstuffs - General guidelines for the validation of qualitative real-time PCR methods - Part 1: Single-laboratory validation

Lithuanian Standards Office , Selectivity in Method Validation

• LST EN 1093-1-2009 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1: Selection of test methods
• LST EN ISO 16140-3:2021 Microbiology of the food chain - Method validation - Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory (ISO 16140-3:2021)
• LST 1428.13-1997 Concrete. Testing methods. Verification of cement strength in concrete
• LST EN 14880-2006 Surface active agents - Determination of inorganic sulphate content in anionic surface active agents - Potentiometric lead selective electrode titration method
• LST CEN/TS 17329-1-2021 Foodstuffs - General guidelines for the validation of qualitative real-time PCR methods - Part 1: Single-laboratory validation

AENOR, Selectivity in Method Validation

• UNE-EN 1093-1:2009 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1: Selection of test methods
• UNE-ISO 17381:2012 Water quality -- Selection and application of ready-to-use test kit methods in water analysis
• UNE 20546-4:1981 SINGLE-TURN ROTARY POWER POTENTIOMETERS. SELECTION OF METHODS OF TEST AND GENERAL REQUIREMENTS
• UNE-CEN/TR 15941:2011 IN Sustainability of construction works - Environmental product declarations - Methodology for selection and use of generic data
• UNE 20546-5:1985 SINGLE-TURN LOW-POWER WIREWOUND AND NON-WIREWOUND POTENTIOMETERS. SELECTION OF METHODS OF TEST AND GENERAL REQUIREMENTS
• UNE-EN 14880:2006 Surface active agents - Determination of inorganic sulphate content in anionic surface active agents - Potentiometric lead selective electrode titration method

International Electrotechnical Commission (IEC), Selectivity in Method Validation

• IEC PAS 62137-3:2008 Electronics assembly technology - Selection guidance of environmental and endurance test methods for solder joints
• IEC 91/784/PAS:2008 Electronics assembly technology - Selection guidance of environmental and endurance test methods for solder joints
• IEC 62739-3:2017 Test method for erosion of wave soldering equipment using molten lead-free solder alloy - Part 3: Selection guidance of erosion test methods
• IEC 60489-6:1987 Methods of measurement for radio equipment used in the mobile services; part 6: selective-calling and data equipment

Taiwan Provincial Standard of the People's Republic of China, Selectivity in Method Validation

• CNS 14627-2002 Method of test for determination of oxygenates in gasoline by gas chromatography and oxygen selective flame ionization detection
• CNS 14393.4-2004 Biological evaluation of medical devices – Part 4：Selection of tests for interactions with blood
• CNS 14393-4-2004 Biological evaluation of medical devices – Part 4：Selection of tests for interactions with blood
• CNS 13382-18-1995 Implants for Surgery-Biocompatibility-Selection of Biological Test Methods for Materials and Devices
• CNS 13382.18-1995 Implants for Surgery-Biocompatibility-Selection of Biological Test Methods for Materials and Devices

ESDU - Engineering Sciences Data Unit, Selectivity in Method Validation

• ESDU 81008 A-1982 The stability and response of linear systems. Part VI: selection of an assessment method.
• ESDU 98004-1998 Design and performance evaluation of heat exchangers: the effectiveness-NTU method. Part 2: performance comparisons and selection of configurations presented in Part 3.

Professional Standard - Nuclear Industry, Selectivity in Method Validation

• EJ/T 1231.4-2008 Test method for analysis of impurity in diuranate.Part4: Determination of fluorine and chlorine by ion selective electrode

Illuminating Engineering Society of North America, Selectivity in Method Validation

• IESNA LM-28-2012 Approved Method: IES Guide for the Selection, Care, and Use of Electrical Instruments in the Photometric Laboratory

ES-UNE, Selectivity in Method Validation

• UNE-EN 17479:2021 Hearing protectors - Guidance on selection of individual fit testing methods (Endorsed by Asociación Española de Normalización in January of 2022.)
• UNE-EN ISO 16140-3:2021 Microbiology of the food chain - Method validation - Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory (ISO 16140-3:2021)
• UNE-CEN/TS 17329-1:2021 Foodstuffs - General guidelines for the validation of qualitative real-time PCR methods - Part 1: Single-laboratory validation (Endorsed by Asociación Española de Normalización in August of 2021.)

IN-BIS, Selectivity in Method Validation

• IS 3711-1966
• IS 10688-1983

Compressed Gas Association (U.S.), Selectivity in Method Validation

• CGA S-7-2013 STANDARD METHOD FOR SELECTING PRESSURE RELIEF DEVICES FOR COMPRESSED GAS MIXTURES IN CYLINDERS

European Committee for Electrotechnical Standardization（CENELEC）, Selectivity in Method Validation

• EN 62137-3:2012 Electronics assembly technology - Part 3: Selection guidance of environmental and endurance test methods for solder joints
• EN 62739-3:2017 Test method for erosion of wave soldering equipment using molten lead-free solder alloy - Part 3: Selection guidance of erosion test methods

National Fire Protection Association (NFPA), Selectivity in Method Validation

• NFPA 101A-2010 Guide on Alternative Approaches to Life Safety Effective Date: 6/15/2009

Professional Standard - Commodity Inspection, Selectivity in Method Validation

• SN/T 3469.2-2013 Determination of flurine in import copper matte or sintered copper material by ion.Selective electrode

Japanese Industrial Standards Committee (JISC), Selectivity in Method Validation

• JIS C 62137-3:2014 Electronics Assembly Technology.Part 3: Selection guidance of environmental and endurance test methods for solder joints
• JIS Q 0043-2:1998 Proficiency testing by interlaboratory comparisons -- Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies

CH-SNV, Selectivity in Method Validation

• SN EN ISO 16140-3:2021 Microbiology of the food chain - Method validation - Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory (ISO 16140-3:2021)

PL-PKN, Selectivity in Method Validation

• PN-EN ISO 16140-3-2021-07 E Microbiology of the food chain - Method validation - Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory (ISO 16140-3:2021)

VN-TCVN, Selectivity in Method Validation

• TCVN 252-2007 Coal.Test method for determining the washability characteristics
• TCVN 7775-2008 Methods of indicating conformity with standards for third-party certification systems

Professional Standard - Non-ferrous Metal, Selectivity in Method Validation

• YS/T 743-2010 Determination of gaseous flouride in purification system for electrolyzed aluminium by alkali-paper sampling and fluorine ion-selective electrode analysis
• YS/T 807.6-2012 Chemical analysis methods of aluminum hardeners.Part 6:Determination of boron content.The ion selective electrode method
• YS/T 1593.3-2023 Methods for chemical analysis of crude lithium carbonate—Part 3：Determination of fluoride ion content—Ion selective electrode method

YU-JUS, Selectivity in Method Validation

• JUS N.R3.021-1981 Fixed low povver non-wirewound resistors. Selection of methods of test and general reguirements

American National Standards Institute （ANSI), Selectivity in Method Validation

• ANSI/ASTM E2232:2010 Guide for Selection and Use of Mathematical Methods for Calculating Absorbed Dose in Radiation Processing Applications
• ANSI/ASTM E2232:2016 Standard Guide for Selection and Use of Mathematical Methods for Calculating Absorbed Dose in Radiation Processing Applications
• ANSI/ANS 8.24-2017 Validation of Neutron Transport Methods for Nuclear Criticality Safety Calculations

ISA - International Society of Automation, Selectivity in Method Validation

• ISA SAF INTGRTY LVL SELCT-2002 Safety Integrity Level Selection - Systematic Methods Including Layer of Protection Analysis
• ISA SAF INT LEV SEL-2002 Safety Integrity Level Selection - Systematic Methods Including Layer of Protection Analysis

CEN - European Committee for Standardization, Selectivity in Method Validation

• EN ISO 4528:2009 Vitreous and porcelain enamel finishes - Selection of test methods for vitreous and porcelain enamelled areas of articles
• PD CEN/TS 17329-1:2019 Foodstuffs - General guidelines for the validation of qualitative real-time PCR methods - Part 1: Single-laboratory validation

Association of German Mechanical Engineers, Selectivity in Method Validation

• VDI 4009 Blatt 10-1986 Analytical methods for fault detection in reliability assurance
• VDI 2066 Blatt 5-1994 Particulate matter measurement - Dust measurement in flowing gases; particle size selective measurement by impaction method - Cascade impactor

KR-KS, Selectivity in Method Validation

• KS M ISO 10231-2021 Motorcycle tyres — Test methods for verifying tyre capabilties
• KS I ISO 17737-2019 Workplace atmoshperes — Guidelines for selecting analytical methods for sampling and analysing isocyanates in air

ANS - American Nuclear Society, Selectivity in Method Validation

• 8.24-2017 Validation of Neutron Transport Methods for Nuclear Criticality Safety Calculations
• 8.24-2007 validation of neutron transport methods for nuclear criticality safety calculations

TH-TISI, Selectivity in Method Validation

• TIS 5023-2006 Methods of indicating conformity with standards for third.party certification systems

European Telecommunications Standards Institute (ETSI), Selectivity in Method Validation

• ETSI EN 300 338-3-2017 Technical characteristics and methods of measurement for equipment for generation@ transmission and reception of Digital Selective Calling (DSC) in the maritime MF@ MF/HF and/or VHF mobile service; Part 3: Class D DSC (V1.2.1)
• ETSI EN 300 338-6-2017 Technical characteristics and methods of measurement for equipment for generation@ transmission and reception of Digital Selective Calling (DSC) in the maritime MF@ MF/HF and/or VHF mobile service; Part 6: Class M DSC (V1.1.1)
• ETSI EN 300 338-2-2017 Technical characteristics and methods of measurement for equipment for generation@ transmission and reception of Digital Selective Calling (DSC) in the maritime MF@ MF/HF and/or VHF mobile service; Part 2: Class A/B DSC (V1.4.1)
• ETSI EN 300 338-4-2017 Technical characteristics and methods of measurement for equipment for generation@ transmission and reception of Digital Selective Calling (DSC) in the maritime MF@ MF/HF and/or VHF mobile service; Part 4: Class E DSC (V1.2.1)
• ETSI EN 300 338-5-2017 Technical characteristics and methods of measurement for equipment for generation@ transmission and reception of Digital Selective Calling (DSC) in the maritime MF@ MF/HF and/or VHF mobile service; Part 5: Handheld VHF Class H DSC (V1.2.1)

ES-AENOR, Selectivity in Method Validation

• UNE 80-262-1987

Professional Standard - Agriculture, Selectivity in Method Validation

• 水产品质量安全检验手册 9.3.1.0-2005 Chapter IX Fishing Feed Inspection Section 3 Fishing Feed Routine Physical and Chemical Testing Methods 1. Determination of Fluorine in Fishing Feed--Ion Selective Electrode Method (GBT 13083-2002)
• 水产品质量安全检验手册 6.9.3.0-2005 Chapter 6 Inspection of Elements in Aquatic Products Section 9 Determination of Fluorine in Aquatic Products (GBT 5009.18-2003) 3. Fluoride Ion Selective Electrode Method

Professional Standard - Petrochemical Industry, Selectivity in Method Validation

• NB/SH/T 0827-2010 Standard test method for sulfur compounds in light petroleum liquids by gas chromatography and sulfur selective detection

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Selectivity in Method Validation

• ASHRAE AB-10-022-2010 To Assess the Validity of the Transfer Function Method: A Neural Model for the Optimal Choice of Conduction Transfer Functions

International Telecommunication Union (ITU), Selectivity in Method Validation

• ITU-R SA.1017 FRENCH-1994 Preferred method for calculating link performance in the space research service M閠hode pr閒閞閑 de calcul de la qualit?de fonctionnement des liaisons dans le service de recherche spatiale
• ITU-R SA.1017 SPANISH-1994 Preferred method for calculating link performance in the space research service M閠odo sugerido para calcular la calidad de un enlace en el servicio de investigaciones del espacio

US-CFR-file, Selectivity in Method Validation

• CFR 40-152.90-2014 Protection of Environment. Part152:Pesticide registration and classification procedures. Section152.90:The selective method.

HU-MSZT, Selectivity in Method Validation

• MNOSZ 19006-1954
• MSZ 21853/11-1979

工业和信息化部, Selectivity in Method Validation

• YS/T 1065.6-2019 Methods for testing the physical and chemical properties of zeolites Part 6: Determination of calcium exchange rate Ion-selective electrode method
• YS/T 1569.5-2022 Methods for chemical analysis of lithium nickel manganate Part 5: Determination of chloride ion content Ion selective electrode method

Inner Mongolia Provincial Standard of the People's Republic of China, Selectivity in Method Validation

• DB15/T 688.3-2014 Methods for Chemical Analysis of Thorium Dioxide Powder Part 3: Determination of Fluorine in Thorium Dioxide Powder—Pyrohydrolysis Ion Selective Electrode Method

IETF - Internet Engineering Task Force, Selectivity in Method Validation

• RFC 4014-2005 Remote Authentication Dial-In User Service (RADIUS) Attributes Suboption for the Dynamic Host Configuration Protocol (DHCP) Relay Agent Information Option

Others:   Selectivity of Method Validation, scope in method validation, Selectivity in Method Validation, gas phase method validation.