ZH
RU
ES

Sample bulk

Sample bulk, Total:366 items.

In the international standard classification, Sample bulk involves: Fuels, Testing of metals, Powder metallurgy, Geology. Meteorology. Hydrology, Fertilizers, Optics and optical measurements, Surface treatment and coating, Products of the textile industry, Laboratory medicine, Analytical chemistry, Products of the chemical industry, Terminology (principles and coordination), Milk and milk products, General methods of tests and analysis for food products, Extraction and processing of petroleum and natural gas, Insulating fluids, Microbiology, Waxes, bituminous materials and other petroleum products, Road engineering, Organic chemicals, Construction materials, Radiation measurements, Soil quality. Pedology, Environmental protection, Petroleum products in general, Protection of and in buildings, Coals, Vocabularies, Wastes, Earthworks. Excavations. Foundation construction. Underground works, Air quality, Plastics, Particle size analysis. Sieving, Refractories, Characteristics and design of machines, apparatus, equipment, Paint ingredients, Jewellery, Aids for disabled or handicapped persons, Quality, Medical equipment, Water quality, Transformers. Reactors, Protection against fire, Welding, brazing and soldering, Test conditions and procedures in general, Physics. Chemistry, Paper and board, Protection against crime, Lubricants, industrial oils and related products, Occupational safety. Industrial hygiene, Fluid power systems, Non-destructive testing, Aircraft and space vehicles in general, Inorganic chemicals.

Standard Association of Australia （SAA）, Sample bulk

AS 1038.21.1.2:2002(R2013)
AS/NZS 2341.21:1995 Methods of testing bitumen and related roadmaking products - Sample preparation
AS/NZS 2341.21:2015
AS 3853.2:2006 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator?s breathing zone - Sampling of gases

RO-ASRO, Sample bulk

STAS 4203-1974 Metalography SAMl'MNG AND PREPARATION OF METALLOGRAPHIG SAMPLES

European Committee for Standardization (CEN), Sample bulk

EN 14780:2011 Solid biofuels - Sample preparation
EN ISO 21646:2022 Solid recovered fuels - Sample preparation (ISO 21646:2022)
EN 963:1995 Geotextiles and Geotextile-Related Products - Sampling and Preparation of Test Specimens
EN 15413:2011 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample
prEN ISO 21646:2020 Solid recovered fuels - Sample preparation (ISO/DIS 21646:2020)
prEN 15522-1-2020 Oil spill identification - Petroleum and petroleum related products - Part 1: Sampling
EN ISO 3785:2023 Metallic materials - Designation of test specimen axes in relation to product texture (ISO 3785:2023)
EN 15443:2011 Solid recovered fuels - Methods for the preparation of the laboratory sample
FprEN ISO 3785 Metallic materials - Designation of test specimen axes in relation to product texture (ISO/FDIS 3785:2023)
EN 21512:1994 Paints and Varnishes - Sampling of Products in Liquid or Paste Form (ISO 1512 : 1991)

IN-BIS, Sample bulk

IS 7999-1976
IS 11520-1985
IS 101 Pt.8/Sec.6-1993 Methods of sampling and test for paints, varnishes and related products. Part 8: Tests for pigments and other solids. Section 6: Volume solids
IS 8883 Pt.2/Sec.1-1978
IS 8883 Pt.2/Sec.2-1978
IS 1060 Pt.1-1966
IS 1062-1963
IS 13569-1993 Hydraulic fluid power. Fluid sample containers. Qualifying and controlling cleaning methods
IS 8883 Pt.2/Sec.3-1978
IS 101 Pt.7/Sec.2-1990
IS 3810 Pt.2-1977

American Society for Testing and Materials (ASTM), Sample bulk

ASTM E3-01(2007)e1 Standard Guide for Preparation of Metallographic Specimens
ASTM B665-03 Standard Guide for Metallographic Sample Preparation of Cemented Tungsten Carbides
ASTM E947-83(2007) Standard Specification for Sampling Single-Phase Geothermal Liquid or Steam for Purposes of Chemical Analysis
ASTM E1558-09(2021) Standard Guide for Electrolytic Polishing of Metallographic Specimens
ASTM D4452-85 Standard Methods for X-Ray Radiography of Soil Samples
ASTM D4452-85(1995)e1 Standard Methods for X-Ray Radiography of Soil Samples
ASTM E947-83(2002) Standard Specification for Sampling Single-Phase Geothermal Liquid or Steam for Purposes of Chemical Analysis
ASTM E947-83(2015) Standard Specification for Sampling Single-Phase Geothermal Liquid or Steam for Purposes of Chemical Analysis
ASTM B665-19 Standard Guide for Metallographic Sample Preparation of Cemented Tungsten Carbides
ASTM UOP709-70 Gas Analysis by Gas Chromatography Using a Two - Injection Technique
ASTM D1071-83(1998) Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
ASTM D1071-83(1998)e1 Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
ASTM D1071-17 Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
ASTM E1675-95a Standard Practice for Sampling Two-Phase Geothermal Fluid for Purposes of Chemical Analysis
ASTM E1675-04(2012) Standard Practice for Sampling Two-Phase Geothermal Fluid for Purposes of Chemical Analysis
ASTM D4452-85(2002)e1 Standard Test Methods for X-Ray Radiography of Soil Samples
ASTM B665-92(1997) Standard Practice for Metallographic Sample Preparation of Cemented Tungsten Carbides
ASTM UOP1026-19 Trace BTEX Impurities in LPG Samples by Gas Chromatography
ASTM D4452-06 Standard Practice for X-Ray Radiography of Soil Samples
ASTM B665-08 Standard Guide for Metallographic Sample Preparation of Cemented Tungsten Carbides
ASTM D4452/D4452M-22 Standard Practice for X-Ray Radiography of Soil Samples
ASTM B665-08(2012) Standard Guide for Metallographic Sample Preparation of Cemented Tungsten Carbides
ASTM D445-18 Standard Practice for X-Ray Radiography of Soil Samples
ASTM D4452-14 Standard Practice for X-Ray Radiography of Soil Samples
ASTM E1387-95 Standard Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography
ASTM E1387-01 Standard Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography
ASTM D3925-02(2022) Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings
ASTM E1675-04e1 Standard Practice for Sampling Two-Phase Geothermal Fluid for Purposes of Chemical Analysis
ASTM D3437-10 Standard Practice for Sampling and Handling Liquid Cyclic Products
ASTM D3437-99 Standard Practice for Sampling and Handling Liquid Cyclic Products
ASTM E947-22 Standard Specification for Sampling Single-Phase Geothermal Liquid or Steam for Purposes of Chemical Analysis
ASTM D3305-94(2005) Standard Practice for Sampling Small Gas Volume in a Transformer
ASTM E1618-97 Standard Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography-Mass Spectrometry
ASTM E1618-01 Standard Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography-Mass Spectrometry
ASTM E1618-06e1 Standard Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography-Mass Spectrometry
ASTM E1618-06 Standard Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography-Mass Spectrometry
ASTM D5854-19 Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
ASTM D5854-19a Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
ASTM D8112-22 Standard Guide for Obtaining In-Service Samples of Turbine Operation Related Lubricating Fluid
ASTM D8112-17 Standard Guide for Obtaining In-Service Samples of Turbine Operation Related Lubricating Fluid
ASTM E1618-19 Standard Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography-Mass Spectrometry
ASTM D8230-19 Standard Test Method for Measurement of Volatile Silicon-Containing Compounds in a Gaseous Fuel Sample Using Gas Chromatography with Spectroscopic Detection
ASTM D5947-02 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
ASTM D5947-06 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
ASTM D5947-03 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
ASTM D5947-96 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
ASTM D5947-01e1 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
ASTM E947-83(1996)e1 Standard Specification for Sampling Single-Phase Geothermal Liquid or Steam for Purposes of Chemical Analysis
ASTM D585-97 Standard Practice for Sampling and Accepting a Single Lot of Paper, Paperboard, Fiberboard, and Related Product
ASTM D5947-11 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
ASTM D3437-15(2022) Standard Practice for Sampling and Handling Liquid Cyclic Products
ASTM D3437-15 Standard Practice for Sampling and Handling Liquid Cyclic Products
ASTM E1618-14 Standard Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography-Mass Spectrometry
ASTM D4597-10(2021) Standard Practice for Sampling Workplace Atmospheres to Collect Gases or Vapors with Solid Sorbent Diffusive Samplers
ASTM D4597-10 Standard Practice for Sampling Workplace Atmospheres to Collect Gases or Vapors with Solid Sorbent Diffusive Samplers
ASTM D7606-17 Standard Practice for Sampling of High Pressure Hydrogen and Related Fuel Cell Feed Gases

German Institute for Standardization, Sample bulk

DIN 51701-3:2006-09 Testing of solid fuels - Sampling and sample preparation - Part 3: Sample preparation
DIN 51750-2:1990-12 Sampling of liquid petroleum products
DIN 51701-2:2006-09 Testing of solid fuels - Sampling and sample preparation - Part 2: Sampling
DIN EN ISO 14780:2020-02 Solid biofuels - Sample preparation (ISO 14780:2017 + Amd 1:2019); German version EN ISO 14780:2017 + A1:2019
DIN EN ISO 21646:2022-09 Solid recovered fuels - Sample preparation (ISO 21646:2022); German version EN ISO 21646:2022
DIN 51701-1:2007-12 Testing of solid fuels - Sampling and sample preparation - Part 1: Definitions
DIN 51701-4:2006-09 Testing of solid fuels - Sampling and sample preparation - Part 4: Equipment
DIN 51701-1:2007 Testing of solid fuels - Sampling and sample preparation - Part 1: Definitions
DIN 19698-2:2016 Characterization of solids - Sampling of solid and semi-solid materials - Part 2: Guidance for taking samples of stockpiles for integral characterisation
DIN 19698-2:2016-12 Characterization of solids - Sampling of solid and semi-solid materials - Part 2: Guidance for taking samples of stockpiles for integral characterisation
DIN 51940:2012-03 Testing of carbonaceous materials - Sampling and sample preparation - Solid materials, solid binders and impregnants
DIN 51701-5:2008 Testing of solid fuels - Sampling and sample preparation - Part 5: Testing of precision
DIN 51701-5:2008-03 Testing of solid fuels - Sampling and sample preparation - Part 5: Testing of precision
DIN EN 15522-1:2021 Oil spill identification - Petroleum and petroleum related products - Part 1: Sampling; German and English version prEN 15522-1:2020
DIN EN 15522-1:2023-05 Oil spill identification - Petroleum and petroleum related products - Part 1: Sampling; German version EN 15522-1:2023
DIN ISO 14887:2010 Sample preparation - Dispersing procedures for powders in liquids (ISO 14887:2000)
DIN EN 14820:2004 Single-use containers for human venous blood specimen collection; German version EN 14820:2004
DIN EN 15413:2011 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample; German version EN 15413:2011
DIN 22022-1:2014-07 Solid fuels - Determination of contents of trace elements - Part 1: General rules, sampling and sample preparation - Preparation of samples for the analyses (dissolution method)
DIN EN ISO 10882-2:2001-04 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 2: Sampling of gases (ISO 10882-2:2000); German version EN ISO 10882-2:2000
DIN EN ISO 10882-2:2023-06 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 2: Sampling of gases (ISO/DIS 10882-2:2023); German and English version prEN ISO 10882-2:2023 / Note: Date of issue 20...
DIN EN ISO 10882-2:2001 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 2: Sampling of gases (ISO 10882-2:2000); German version EN ISO 10882-2:2000
DIN EN 14780:2011 Solid biofuels - Sample preparation; German version EN 14780:2011
DIN 22022-1:2014 Solid fuels - Determination of contents of trace elements - Part 1: General rules, sampling and sample preparation - Preparation of samples for the analyses (dissolution method)
DIN 22022-1:2001 Solid fuels - Determination of contents of trace elements - Part 1: General rules, sampling and sample preparation; Preparation of samples for the analyses (dissolution method)
DIN EN 16423:2014-02 Liquefied petroleum gases - Determination of dissolved residue - Gas chromatographic method using liquid, on-column injection; German version EN 16423:2013
DIN ISO 14887:2010-03 Sample preparation - Dispersing procedures for powders in liquids (ISO 14887:2000)
DIN 51940:2012 Testing of carbonaceous materials - Sampling and sample preparation - Solid materials, solid binders and impregnants
DIN 51940:1992 Testing of carbon materials; sampling and sample preparation; solid materials, solid binders and impregnants
DIN 54389:2020-07 Solid recovered fuels - Obtaining representative laboratory samples from heterogeneous materials by bale sampling

CL-INN, Sample bulk

Lithuanian Standards Office , Sample bulk

LST ISO 7742:2002 Solid fertilizers. Reduction of samples
LST EN 14780-2011 Solid biofuels - Sample preparation
LST EN 15413-2011 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample
LST IEC 60475:2002 Method of sampling liquid dielectrics (identical IEC 60475:1974)
LST ISO 17604:2003/A1:2010 Microbiology of food and animal feeding stuffs - Carcass sampling for microbiological analysis - AMENDMENT 1: Sampling of poultry carcasses (ISO 17604:2003/Amd.1:2009, identical)
LST ISO 10381-7:2009 Soil quality - Sampling - Part 7: Guidance on sampling of soil gas (ISO 10381-7:2005, identical)
LST ISO 8213:2005 Chemical products for industrial use. Sampling techniques. Solid chemical products in the form of particles varying from powders to coarse lumps (identical ISO 8213:1986)
LST ISO 11338-2:2008 Stationary source emissions - Determination of gas and particle-phase polycyclic aromatic hydrocarbons - Part 2: Sample preparation, clean-up and determination (ISO 11338-2:2003, identical)
LST EN ISO 13437:2000 Geotextiles and geotextile-related products - Method for installing and extracting samples in soil, and testing specimens in laboratory (ISO 13437:1998)
LST ISO 8358:2002 Solid fertilizers. Preparation of samples for chemical and physical analysis
LST EN 15443-2011 Solid recovered fuels - Methods for the preparation of the laboratory sample
LST EN ISO 3785:2006 Metallic materials - Designation of test specimen axes in relation to product texture (ISO 3785:2006)
LST ISO 11338-1:2008 Stationary source emissions - Determination of gas and particle-phase polycyclic aromatic hydrocarbons - Part 1: Sampling (ISO 11338-1:2003, identical)
LST EN ISO 10882-2:2002 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 2: Sampling of gases (ISO 10882-2:2000)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Sample bulk

GB/T 9340-2001 Method for relative measurement of the colour of fluorescent samples
GB/T 6679-2003 General Rules for Sampling of Solid Chemical Products
GB/T 6680-2003 General rules for sampling liquid chemical products
GB/T 6681-2003 General rules for sampling gaseous chemical products
GB/T　6679-2003 General Rules for Sampling of Solid Chemical Products
GB/T 6679-2003 General Rules for Sampling of Solid Chemical Products
GB/T 2000-2000 Coking solid products-Sampling
GB/T 8570.1-1988 Liquefied anhydrous ammonia--Taking a laboratory sample
GB/T 28730-2012 Method for preparation of solid biofuels sample
GB/T 20832-2007 Metallic materials Designation of test specimen axes in relation to product texture
GB/T 11223.1-1989 Analytical determination of uranium in ash of biological samples--Solid fluorimetry
GB/T 20099-2006 Sample preparatio.Dispersing procedures for powders in liquids
GB/Z 31233-2014 Implementation guide of random sampling for discrete items
GB/T 15482-1995 Single sampling procedures and tables for product quality audit of small population by attributes
GB/T 2389-2006 Reactive dyes. Determination of relative content of hydrolised dye comparatively standard sample
GB/T 2389-2013 Reactive dyes.Determination of relative content of hydrolised dye comparatively standard sample
GB/T 26515.2-2011 Essential oils.General guidance on chromatographic profiles.Part 2:Utilization of chromatographic profiles of samples of essential oils
GB/T 11223.2-1989 Analytical determination of uranium in ash of biological samples—Laser liquid fluorimetry
GB/T 18340.1-2001 Organic geochemical measurements of geological samples--Method for the analysis of light mass crude oils by gas chromatography
GB/Z 43032-2023 Sample preparation methods for characterization of metal and metal oxide nano-objects in nanotechnology water samples

Association Francaise de Normalisation, Sample bulk

NF G38-106:1995 Geotextiles and geotextile-related products. Sampling and preparation of test specimens.
NF EN ISO 2588:2014 Cuir - Échantillonnage - Nombre d'unités élémentaires de l'échantillon global
NF X34-122:2011 Solid biofuels - Sample preparation.
NF X34-122*NF EN ISO 14780:2017 Solid biofuels - Sample preparation
NF EN ISO 21646:2022 Combustibles solides de récupération - Préparation des échantillons
NF EN ISO 14780:2017 Biocombustibles solides - Préparation des échantillons
NF EN ISO 3171:1999 Produits pétroliers liquides - Échantillonnage automatique en oléoduc
NF M07-076:1995 Liquid petroleum products. Retail outlet sampling.
NF M01-004:1973 Solid mineral fuels. Method of sampling of hard coal and lignite. Treatment of sample.
NF G07-206:1984 Textiles. Tests for colour fastness. Specifications for standard adjacent fabric : silk.
NF X34-122/A1*NF EN ISO 14780/A1:2019 Solid biofuels - Sample preparation - Amendment 1
NF EN ISO 14780/A1:2019 Biocombustibles solides - Préparation des échantillons - Amendement 1
NF X43-100*NF ISO 7708:1996 Air quality. Particle size fraction definitions for health-related sampling.
NF X11-710*NF ISO 14887:2000 Sample preparation - Dispersing procedures for powders in liquids.
NF ISO 14887:2000 Préparation de l'échantillon - Procédures pour la dispersion des poudres dans les liquides
NF X43-400-2*NF ISO 11338-2:2004 Stationary source emissions - Determination of gas and particle-phase polycyclic aromatic hydrocarbons - Part 2 : sample preparation, clean-up and determination
NF A88-202-2*NF EN ISO 10882-2:2000 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 2 : sampling of gases
NF EN ISO 16000-11:2006 Air intérieur - Partie 11 : dosage de l'émission de composés organiques volatils de produits de construction et d'objets d'équipement - Échantillonnage, conservation des échantillons et préparation d'échantillons pour essai
NF G07-205:1984 Textiles. Tests for colour fastness. Specifications for standard adjacent fabric : acrylic.
NF X34-229*NF EN 15443:2011 Solid recovered fuels - Methods for the preparation of the laboratory sample
NF M07-077-2:1997 Produits pétroliers liquides - Échantillonnage de carburant au pistolet de distribution - Partie 2 : échantillonnage de grand volume, à un instant donné.
NF A88-202-1*NF EN ISO 10882-1:2011 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1 : sampling of airborne particles.
NF X34-126*NF EN ISO 18846:2016 Solid biofuels - Determination of fines content in samples of pellets
NF T35-509-1:2012 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 1 : sampling.
NF V08-202/A1:2009 Microbiology of food and animal feeding stuffs - Carcass sampling for microbiological analysis - Amendment 1 : sampling of poultry carcasses.
XP ISO/TS 7821:2005 Tabac et produits du tabac - Préparation et constitution d'échantillons identiques à partir d'un même lot pour la conduite d'essais comparatifs portant sur la qualité des méthodes d'essai

PT-IPQ, Sample bulk

NP EN 12286-2000 In vitro diagnostic medical devices Measurement of quantities in samples of boilogical origin Presentation of reference measurement procedures
NP EN ISO 707:2001 Milk and milk products Guidance on sampling(ISO 707:1997)
NP 1045-1987

HU-MSZT, Sample bulk

PL-PKN, Sample bulk

PN C87072-1993 Solid fertilizers. Reduction of samples
PN G01400-1987 Solid raw materials Geological samples Archivization

Korean Agency for Technology and Standards (KATS), Sample bulk

KS M ISO 7742-2007(2012) Solid fertilizers－Reduction of samples
KS M ISO 14780:2021 Solid biofuels — Sample preparation
KS L 5300-2009 Determination of asbestos in bulk material
KS K ISO 13437-2007(2017) Geotextiles and geotextile-related products－Method for installing and extracting samples in soil, and testing specimens in laboratory
KS M ISO 8358-2007(2012) Solid fertilizers－Preparation of samples for chemical and physical analysis
KS K ISO 13437:2007 Geotextiles and geotextile-related products－Method for installing and extracting samples in soil, and testing specimens in laboratory
KS M ISO 18846:2021 Solid biofuels — Determination of fines content in samples of pellets
KS I ISO 11338-2:2004 Stationary source emissions-Determination of gas and particle-phase polycyclic aromatic hydrocarbons-Part 2:Sample preparation, clean-up and determination
KS I ISO 11338-2:2014 Stationary source emissions — Determination of gas and particle-phase polycyclic aromatic hydrocarbons — Part 2: Sample preparation, clean-up and determination
KS I ISO 11338-1-2014(2019) Stationary source emissions — Determination of gas and particlephase polycyclic aromatic hydrocarbons — Part 1: Sampling

NL-NEN, Sample bulk

NEN 3010-1991 Solid mineral fuels - Sampling and sample preparation of coal
NVN 5635-1993 Radioactivity measurements. Sample preparation of suspended solids in water

British Standards Institution (BSI), Sample bulk

BS 5309-3:1976 Methods for sampling chemical products - Sampling of liquids
BS 5309-4:1976 Methods for sampling chemical products - Sampling of solids
BS 5551-2.5:1989 Fertilizers. Sampling. Method for reduction of samples of solid fertilizers
BS EN ISO 14780:2017 Solid biofuels. Sample preparation
BS EN 14780:2011 Solid biofuels. Sample preparation
BS EN ISO 21646:2022 Solid recovered fuels. Sample preparation
BS EN ISO 14780:2017+A1:2019 Solid biofuels. Sample preparation
DD CEN/TS 15413:2006 Solid recovered fuels — Methods for the preparation of the test sample from the laboratory sample
BS DD CEN/TS 15413:2006 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample
BS 5598-1:1978 Methods of sampling and test for halogenated hydrocarbons. Sampling of liquid products
BS EN 15413:2011 Solid recovered fuels. Methods for the preparation of the test sample from the laboratory sample
BS DD CEN/TS 14780:2005 Solid biofuels — Methods for sample preparation
BS DD CEN/TS 14780:2006 Solid biofuels. Methods for sample preparation
20/30424634 DC BS EN 17605 Algae, algae products and intermediates. Methods of sampling and analysis. Sample treatment
BS EN ISO 13437:1998 Geotextiles and geotextile-related products - Method for installing and extracting samples in soil, and testing specimens in laboratory
21/30395970 DC BS EN ISO 21646. Solid recovered fuels. Sample preparation
BS EN ISO 1927-2:2012 Monolithic (unshaped) refractory products. Sampling for testing
BS 2000-512:2005 Methods of test for petroleum and its products Part 512: Petroleum and related products — Preparation of a test portion of high-boiling liquids for the determination of water content — Nitrogen purge method (Identical with IP 512:2005)
BS 5551 Sec.2.5:1989 Fertilizers. Sampling. Method for reduction of samples of solid fertilizers
BS EN 15522-1:2023 Tracked Changes. Oil spill identification. Petroleum and petroleum related products. Sampling
BS ISO 10328-2:1997 Prosthetics.Structural testing of lower-limb prostheses - Test samples
BS DD CEN/TS 15443:2006 Solid recovered fuels — Methods for laboratory sample preparation
BS DD CEN/TS 15443:2007 Solid recovered fuels. Methods for laboratory sample preparation
BS ISO 14887:2001 Sample preparation. Dispersing procedures for powders in liquids
BS ISO 14887:2000 Sample preparation - Dispersing procedures for powders in liquids
BS 5551-2.8:1991 Fertilizers. Sampling. Methods for preparation of samples of solid fertilizer for chemical and physical analysis
BS EN ISO 11125-1:1994 Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Sampling
BS ISO 11338-1:2003 Stationary source emissions - Determination of gas and particle-phase polycyclic aromatic hydrocarbons - Sampling
BS ISO 11596:2010 Jewellery. Sampling of precious metal alloys for and in jewellery and associated products
BS EN ISO 3785:2023 Metallic materials. Designation of test specimen axes in relation to product texture
BS EN 15443:2011 Solid recovered fuels. Methods for the preparation of the laboratory sample
BS ISO 11338-2:2003 Stationary source emissions - Determination of gas and particle-phase polycyclic aromatic hydrocarbons - Sample preparation, clean-up and determination
BS 5551-2.7:1988 Fertilizers - Sampling - Recommendations for minimum mass of increment of a solid fertilizer to be taken to be representative of the total sampling unit
BS ISO 20298-1:2018 Fine bubble technology. Sampling and sample preparation for measurement - Ultrafine bubble dispersion in water
BS EN ISO 10882-2:2000 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Sampling of gases
BS EN 16016-2:2011 Non destructive testing. Radiation methods. Computed tomography. Principle, equipment and samples
PD ISO/TS 11251:2019 Nanotechnologies. Characterization of volatile components in single-wall carbon nanotube samples using evolved gas analysis/gas chromatograph-mass spectrometry

CZ-CSN, Sample bulk

CSN ON 42 0466-1964
CSN 01 5250-1988 Mulually delivered products quality as-sessment and certification system Ccrtificate of conformity and test report on product sample testing The lay-out of forms and the way of fil-ling in
CSN 44 1304-1989 Solid fuels. Methods of sampling and preparation of samples for laboratory testing
CSN ISO 4519:1994 Electrodeposited metallic coatings and related finishes. Sampling procedures for inspection by attributes
CSN ISO 1213-2:1994 Solid mineral fuels. Vocabulary. Part 2: Terms relating to sampling, testing and analysis

SE-SIS, Sample bulk

SIS 18 41 51 E-1967 In the event of any differences in interpretation of this standard the Swedish version shall take precedence over this translation.
SIS 02 02 02-1966 Sampling of liquid, semi-liquid and certain solid products
SIS SS 15 51 07-1981 Petroleum products - Sampling of semi-liquid and certain solid products

Professional Standard - Petrochemical Industry, Sample bulk

SH/T 0229-1992 Methods of Sampling Solid and Semi-Solid Petroleum Products
SH/T 0635-1996 Liquid petroleum product sampling method (semi-automatic method)

FI-SFS, Sample bulk

SFS 3318-1978

Professional Standard - Agriculture, Sample bulk

GB/T 6679-1986 General Rules for Sampling of Solid Chemical Products
GB/T 6680-1986 General Rules for Sampling of Liquid Chemical Products
SN/T 5493-2023 Determination of 29 Fentanyls in Solid and Liquid Samples by Liquid Chromatography-Quadrupole/Time-of-Flight Mass Spectrometry
水产品质量安全检验手册 1.3.2.4-2005 Chapter 1 General Introduction Section 3 Sample Treatment 2. New Technology of Sample Pretreatment (4) Solid Phase Extraction
水产品质量安全检验手册 1.3.2.5-2005 Chapter 1 General Introduction Section 3 Sample Treatment 2. New technology of sample pretreatment (5) Solid phase microextraction technology
GB 8570.1-1988 Collection of laboratory samples of liquid anhydrous ammonia
NY/T 1880-2010 Densified biofuel-Methods for sample preparation
水产品质量安全检验手册 1.3.2.9-2005 Chapter 1 General Introduction Section 3 Sample Treatment 2. New Technology of Sample Pretreatment (9) Supercritical Fluid Extraction Technology

Danish Standards Foundation, Sample bulk

DS/EN 14780:2011 Solid biofuels - Sample preparation
DS/EN 15413:2011 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample
DS/EN ISO 20764:2004 Petroleum and related products - Preparation of a test portion of high-boiling liquids for the determination of water content - Nitrogen purge method
DS/EN ISO 13437:2000 Geotextiles and geotextile-related products - Method for installing and extracting samples in soil, and testing specimens in laboratory
DS/EN ISO 3785:2006 Metallic materials - Designation of test specimen axes in relation to product texture
DS/ISO 11338-2:2004 Stationary source emissions - Determination of gas and particle-phase polycyclic aromatic hydrocarbons - Part 2: Sample preparation, clean-up and determination
DS/ISO 11596:2008 Jewellery - Sampling of precious metal alloys for and in jewellery and associated products
DS/EN 15443:2011 Solid recovered fuels - Methods for the preparation of the laboratory sample
DS/EN ISO 10882-2:2001 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 2: Sampling of gases
DS/EN ISO 1927-2:2013 Monolithic (unshaped) refractory products - Part 2: Sampling for testing
DS/ISO/TS 11251:2011 Nanotechnologies – Characterization of volatile components in single-wall carbon nanotube samples using evolved gas analysis/gas chromatograph-mass spectrometry
DS/ISO 17604/Amd. 1:2009 Microbiology of food and animal feeding stuffs - Carcass sampling for microbiological analysis - Amendment 1: Sampling of poultry carcasses
DS/ISO 11338-1:2004 Stationary source emissions - Determination of gas and particle-phase polycyclic aromatic hydrocarbons - Part 1: Sampling

AENOR, Sample bulk

UNE-EN 14780:2012 Solid biofuels - Sample preparation
UNE-EN 15413:2012 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample
UNE-EN ISO 13437:1999 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - METHOD FOR INSTALLING AND EXTRACTING SAMPLES IN SOIL, AND TESTING SPECIMENS IN LABORATORY (ISO 13437:1998)
UNE 32002:1995 SOLID MINERAL FUELS. DETERMINATION OF MOISTURE IN THE ANALYSIS SAMPLE.
UNE-EN 15443:2011 Solid recovered fuels - Methods for the preparation of the laboratory sample
UNE-EN ISO 3785:2007 Metallic materials - Designation of test specimen axes in relation to product texture (ISO 3785:2006)
UNE-ISO 11338-2:2006 Stationary source emissions -- Determination of gas and particle-phase polycyclic aromatic hydrocarbons -- Part 2: Sample preparation, clean-up and determination. (ISO 11338-2:2003)

KR-KS, Sample bulk

KS M ISO 14780-2021 Solid biofuels — Sample preparation
KS M ISO 18846-2021 Solid biofuels — Determination of fines content in samples of pellets

International Organization for Standardization (ISO), Sample bulk

ISO 21646:2022 Solid recovered fuels — Sample preparation
ISO 14780:2017/Amd 1:2019 Solid biofuels — Sample preparation — Amendment 1
ISO 3785:2006 Metallic materials - Designation of test specimen axes in relation to product texture
ISO/R 1213-2:1971 Vocabulary of terms relating to solid mineral fuels — Part 2: Terms relating to coal sampling and analysis
ISO 14887:2000 Sample preparation - Dispersing procedures for powders in liquids
ISO 11596:2008 Jewellery - Sampling of precious metal alloys for and in jewellery and associated products
ISO 3785:2023 Metallic materials — Designation of test specimen axes in relation to product texture
ISO 17604:2003/Amd 1:2009 Microbiology of food and animal feeding stuffs - Carcass sampling for microbiological analysis - Amendment 1: Sampling of poultry carcasses
ISO/DIS 10882-2 Health and safety in welding and allied processes — Sampling of airborne particles and gases in the operator's breathing zone — Part 2: Sampling of gases
ISO 13437:1998 Geotextiles and geotextile-related products - Method for installing and extracting samples in soil, and testing specimens in laboratory
ISO 1213-2:2016 Solid mineral fuels - Vocabulary - Part 2: Terms relating to sampling, testing and analysis
ISO 17604:2015 Microbiology of the food chain - Carcass sampling for microbiological analysis
ISO 1927-3:2012 Monolithic (unshaped) refractory products - Part 3: Characterization as received
ISO 1927-2:2012 Monolithic (unshaped) refractory products - Part 2: Sampling for testing
ISO 11338-2:2003 Stationary source emissions - Determination of gas and particle-phase polycyclic aromatic hydrocarbons - Part 2: Sample preparation, clean-up and determination
ISO 14175:2008 Welding consumables - Gases and gas mixtures for fusion welding and allied processes

ES-UNE, Sample bulk

UNE-EN ISO 21646:2023 Solid recovered fuels - Sample preparation (ISO 21646:2022)
UNE-EN ISO 14780:2018 Solid biofuels - Sample preparation (ISO 14780:2017)
UNE-EN ISO 14780:2018/A1:2020 Solid biofuels - Sample preparation - Amendment 1 (ISO 14780:2017/Amd 1:2019)

Group Standards of the People's Republic of China, Sample bulk

T/ICMTIA ESG0021-2022 General Rules for Sampling of High Purity Gas Products
T/CSTM 00613-2023 Fumed powder microporous thermal insulation products
T/QGCML 1126-2023 Continuous dual sample chamber plasma cleaning device
T/NAIA 087-2021 Determination of Mercury Content in Coal-based Liquid Oil by Direct Sampling Method

未注明发布机构, Sample bulk

DIN EN ISO 14780:2017 Biogenic solid fuels – sample preparation
BS EN 963:1995(1999) Geotextiles and geotextile - related products — Sampling and preparation of test specimens
DIN EN 1482 Berichtigung 1:1997 Sampling and preparation of samples of solid fertilizers and calcium/magnesium soil improvers; German version EN 1482: 1996
BS EN ISO 20764:2003(2006) Methods of test for petroleum and its products Part 512 : Petroleum and related products — Preparation of a test portion of high - boiling liquids for the determination of water content — Nitrogen purge method

Shanghai Provincial Standard of the People's Republic of China, Sample bulk

DB31/T 1420-2023 Technical Specifications for Collection of Novel Coronavirus Samples from Cold Chain Food and Related Object Surfaces

RU-GOST R, Sample bulk

GOST R 54229-2010 Solid recovered fuels. Methods for the preparation of the test sample from the laboratory sample
GOST 33510-2015 Solid recovered fuels. Methods for the preparation of the test sample from the laboratory sample
GOST 33255-2015 Solid biofuels. Methods for sample preparation
GOST R 54212-2010 Solid biofuels. Methods for sample preparation
GOST R 54228-2010 Solid recovered fuels. Methods for laboratory sample preparation
GOST 33509-2015 Solid recovered fuel. Methods for laboratory sample preparation
GOST 33503-2015 Solid mineral fuel. Methods for determination of moisture in the analysis sample

CEN - European Committee for Standardization, Sample bulk

PD CEN/TS 15413:2006 Solid recovered fuels Methods for the preparation of the test sample from the laboratory sample
PD CEN/TS 14780:2005 Solid biofuels - Methods for sample preparation
PD CEN/TS 15443:2006 Solid recovered fuels - Methods for laboratory sample preparation

AT-ON, Sample bulk

OENORM EN 17605-2020 Algae, algae products and intermediates - Methods of sampling and analysis - Sample treatment
OENORM EN ISO 21646:2021 Solid recovered fuels - Sample preparation (ISO/DIS 21646:2020)
OENORM EN 15522-1-2021 Oil spill identification Petroleum and petroleum related products - Part 1: Sampling
ONORM F 5215 Teil.1-1980 Testbodies (dummies) for the fest of climbing or safety harnesses

American National Standards Institute （ANSI), Sample bulk

ANSI/ASTM E1675:1995 Practice for Sampling Two-Phase Geothermal Fluid for Purposes of Chemical Analysis
ANSI/ASTM D5947:2001 Test Methods for Physical Dimensions of Solid Plastics Specimens
ANSI/TAPPI T496 sp-2013 Specimen preparation for cross directional internal tearing resistance for paper, paperboard and related materials
ANSI/TAPPI T400 sp-2011 Sampling and accepting a single lot of paper, paperboard, containerboard, or related product
ANSI/AWS F1.1M:2018 Methods for Sampling Fumes and Gases Generated by Welding and Allied Processes (6th Edition)

Japanese Industrial Standards Committee (JISC), Sample bulk

JIS Z 4402:1993 Vials for liquid scintillation counting
JIS Z 8824:2004 Sample preparation -- Dispersing procedures for powders in liquids
JIS B 9937:2001 Hydraulic fluid power -- Fluid sample containers -- Qualifying and controlling cleaning methods

VN-TCVN, Sample bulk

TCVN 2614-2008 Liquefied anhydrous ammonia for industrial use.Sampling.Taking a laboratory sample
TCVN 3121-2-2003 Mortar for masonry.Test methods.Part 2: Sampling and preparation of sample

PK-PSQCA, Sample bulk

PS 489-1965 SAMPLING AND TESTING FOR PAPER AND ALLIED PRODUCTS, PART—II

Natural Gas Processor's Association (NGPA), Sample bulk

GPA STD 2174-2014 Obtaining Liquid Hydrocarbon Samples for Analysis by Gas Chromatography
GPA STD 2166-2005 Obtaining Natural Gas Samples for Analysis by Gas Chromatography

AWS - American Welding Society, Sample bulk

F1.5-1996 Methods for Sampling and Analyzing Gases from Welding and Allied Processes
F1.5M-2003 Methods for Sampling and Analyzing Gases from Welding and Allied Processes
F1.5-1987 Methods for Sampling and Analyzing Gases from Welding and Allied Processes
F1.1M-2018 Methods for Sampling Fumes and Gases Generated by Welding and Allied Processes (6th Edition)

Professional Standard - Commodity Inspection, Sample bulk

SN/T 0975-2000 Method for sampling of petroleum and liquid petroleum products for import and export (automatic sampling)
SN/T 0826-1999 Method for sampling of petroleum and liquid petroleum products for import and export(manual sampling)
SN/T 3605-2013 Determination of mercury content in liquid petroleum products.Direct injection method
SN/T 3899-2014 Guidance on good cell culture practice and sample preparation for cosmetics alternative testing in vitro

海关总署, Sample bulk

SN/T 0975-2020 Sampling method for import and export of petroleum and liquid petroleum products (automatic sampling)

International Electrotechnical Commission (IEC), Sample bulk

IEC 60582:1977 Dimensions of vials for liquid scintillation counting

Professional Standard - Geology, Sample bulk

DZ/T 0372-2021 Specification for sample preparation of solid mineral dressing and smelting test

Professional Standard - Energy, Sample bulk

NB/T 10716-2021 Specifications for collection and preservation of geothermal fluid samples

Association of German Mechanical Engineers, Sample bulk

VDI 3493 Blatt 1-1982 Gaseous emission measurement; determination of vinyl chloride; gas chromatographic method; grab sampling
VDI 3863 Blatt 1-1987 Measurement of gaseous emission; determination of acrylonitrile; gaschromatographic method; grab sampling
VDI 2457 Blatt 3-1996 Gaseous emission measurements - Gas chromatographic determination of organic compounds - Determination of substituted anilines - Sampling by solid phase adsorption
VDI 2457 Blatt 5-2000 Gaseous emission measurement - Chromatographic determination of organic compounds - Sampling in gas vessels, gas chromatographic analysis

IT-UNI, Sample bulk

UNI ISO 11338-2:2021 Stationary source emissions - Determination of gas and particle-phase polycyclic aromatic hydrocarbons - Part 2: Sample preparation, clean-up and determination
UNI ISO 11338-1:2021 Stationary source emissions - Determination of gas and particle-phase polycyclic aromatic hydrocarbons - Part 1: Sampling

中华人民共和国环境保护部, Sample bulk

GB 11223.1-1989 Analytical determination of uranium in ash of biological samples
GB 11223.2-1989 Analytical determination of uranium in ash of biological samples-Laser liquid fluorimetry

API - American Petroleum Institute, Sample bulk

API PUBL 28-30726-1981 IN VIVO AND IN VITRO MUTAGENICITY STUDIES FLUID PROCESS COKE Sample 6-1-468
API PUBL 28-30727-1981 SOLID CONDENSED EMISSION PRODUCT FROM DELAYED COKE PROCESS Sample 3-1-134

US-CFR-file, Sample bulk

CFR 40-1065.1107-2014 Protection of Environment. Part1065:Engine-testing procedures. Section1065.1107:Sample media and sample system preparation; sample system assembly.

Professional Standard - Water Conservancy, Sample bulk

SL 391.3-2007 Sample preparation methods for organic analysis.Part 3:Solid-phase extraction(SPE)

Professional Standard - Public Safety Standards, Sample bulk

GA/T 930-2011 GC and chemistry examination methods for cyanogens ion in biology samples
GA/T 933-2011 Gas chromatography and gas chromatography-mass spectrometry detection method for fluoroacetate ions in biological samples
GA/T 2054-2023
GA/T 2052-2023

GOSTR, Sample bulk

GOST 9716.3-1979 Copper-zinc alloys. Method of spectral analysis of oxide spesimens with photographic registration of spectrum
GOST ISO 1927-2-2019 Monolithic (unshaped) refractory products. Part 2. Sampling for testing
GOST 9716.1-1979 Copper-zinc alloys. Method of spectral analysis of metal standard spesimens with photographic registration of spectrum
GOST 6732.2-1989 Organic dyes, intermediates for dyes, auxiliary compounds for textiles. Sampling methods

United States Navy, Sample bulk

NAVY MIL-DTL-17557 F-2013 COOLERS, FLUID, INDUSTRIAL, NAVAL SHIPBOARD (SAMPLE WATER COOLERS)

Military Standards (MIL-STD), Sample bulk

DOD A-A-50978-1985 TUBE, BIOLOGICAL CULTURE SAMPLING, PLEDGET STYLE, WITH TRANSPORT MEDIA, PLASTIC

BE-NBN, Sample bulk

NBN-EN 21512-1994 Paints and varnishes. Sampling of products in liquid or paste form (ISO 1512:1991)

国家市场监督管理总局、中国国家标准化管理委员会, Sample bulk

GB/T 37844-2019 Space materials science experiment—Preparation specification for solid experiment sample