verify or confirm

verify or confirm, Total:476 items.

In the international standard classification, verify or confirm involves: Geology. Meteorology. Hydrology, Air quality, Environmental protection, Farm buildings, structures and installations, Nuclear energy engineering, Software development and system documentation, Technical product documentation, Analytical chemistry, Coals, Metalliferous minerals, Non-ferrous metals, Company organization and management, Quality, Microprocessor systems, Protection against fire, Applications of information technology, Wastes, Road vehicles in general, Welding, brazing and soldering, Space systems and operations, Energy and heat transfer engineering in general, Microbiology, General methods of tests and analysis for food products, Freight distribution of goods, Products of the textile industry, Occupational safety. Industrial hygiene, Standardization. General rules, Electrical engineering in general, Metrology and measurement in general, Testing of metals, Laboratory medicine, Networking, Passenger and cabin equipment, Diagnostic, maintenance and test equipment, Insulating materials, Road vehicle systems, Shipbuilding and marine structures in general, Optics and optical measurements, Aircraft and space vehicles in general, Protection against crime, Wind turbine systems and other alternative sources of energy, Measurement of force, weight and pressure, Electricity. Magnetism. Electrical and magnetic measurements, Paint coating processes, Fluid storage devices, Raw materials for rubber and plastics, Vocabularies, Character sets and information coding, Aerospace electric equipment and systems, Electromechanical components for electronic and telecommunications equipment, Industrial automation systems, Non-destructive testing, Interface and interconnection equipment, Ventilators. Fans. Air-conditioners, Environmental testing, Medical sciences and health care facilities in general, Mobile services, Mechanical testing, Services, Products of the chemical industry, Sterilization and disinfection, Biology. Botany. Zoology, Installations in buildings, Equipment for petroleum and natural gas industries, Linear and angular measurements, Road engineering, Ergonomics, Information technology (IT) in general, Solar energy engineering, Fuels, Internal combustion engines for road vehicles, Internal combustion engines, Powder metallurgy, Electrical accessories.

Association Francaise de Normalisation, verify or confirm

NF X30-365:2013 Greenhouse gases - Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition
NF X30-364-3:2012 Greenhouse gases - Part 3 : specification with guidance for the validation and verification of greenhouse gas assertions.
NF X30-365*NF EN ISO 14065:2021 General principles and requirements for bodies validating and verifying environmental information
NF P92-553:2021 Fire safety engineering - Verification and validation protocol for building fire evacuation models
NF EN ISO 17662:2016 Soudage - Étalonnage, vérification et validation du matériel utilisé pour le soudage, y compris pour les procédés connexes
NF EN ISO 16140-6:2019 Microbiologie de la chaîne alimentaire - Validation des méthodes - Partie 6 : protocole pour la validation de méthodes alternatives (commerciales) pour la confirmation microbiologique et le typage
NF X50-067:2008 Development of a product or service or a product and service certification reference document.
NF ISO 20414:2021 Ingénierie de la sécurité incendie - Protocole de vérification et de validation de modèles d'évacuation dans un bâtiment en cas d'incendie
NF EN 16303:2020 Dispositifs de retenue routiers - Processus de vérification et de validation pour l'utilisation d'essais virtuels dans les essais de choc contre un dispositif de retenue pour véhicules
FD A88-120:2021 Certification des agents d'inspection en soudage - Lignes directrices générales
NF P92-540-1*NF ISO 16730-1:2016 Fire safety engineering - Procedures and requirements for verification and validation of calculation methods - Part 1 : general
NF ISO 16730-1:2016 Ingénierie de la sécurité incendie - Procédures et exigences pour la vérification et la validation des méthodes de calcul - Partie 1 : généralités
FD ISO/TR 16730-3:2014 Ingénierie de la sécurité incendie - Évaluation, vérification et validation des méthodes de calcul - Partie 3 : exemple d''un modèle CFD
FD ISO/TR 16730-2:2013 Ingénierie de la sécurité incendie - Évaluation, vérification et validation des méthodes de calcul - Partie 2 : exemple d'un modèle de zone
FD ISO/TR 16730-4:2013 Ingénierie de la sécurité incendie - Évaluation, vérification et validation des méthodes de calcul - Partie 4 : exemple d'un modèle strucutral
FD ISO/TR 16730-5:2014 Ingénierie de la sécurité incendie - Évaluation, vérification et validation des méthodes de calcul - Partie 5 : Exemple d''un modèle d''évacuation
XP X50-068*XP ISO/IEC TS 17023:2013 Conformity assessment - Guidelines for determining the duration of management system certification audits
XP ISO/IEC TS 17023:2013 Évaluation de la conformité - Lignes directrices pour la détermination de la durée des audits de certification d'un système de management
XP Z42-105:2020 Electronic Storage Specifications for use of an Otentik Visible Digital Seal (VDS) for the authentication, verification and acquisition of data carried by a document or object
NF X42-150*NF ISO 21899:2020 Biotechnology - Biobanking - General requirements for the validation and verification of processing methods for biological material in biobanks
NF X07-009-1:1994 Quality assurance requirements for measuring equipment. Part 1 : metrological confirmation system for measuring equipment.

European Committee for Standardization (CEN), verify or confirm

EN ISO 14065:2013 Greenhouse gases - Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition
EN ISO 14065:2021 General principles and requirements for bodies validating and verifying environmental information (ISO 14065:2020)
EN ISO 14065:2012 Greenhouse gases - Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition
EN ISO 14064-3:2019 Greenhouse gases - Part 3: Specification with guidance for the verification and validation of greenhouse gas statements (ISO 14064-3:2019)
EN ISO 14064-3:2012 Greenhouse gases - Part 3: Specification with guidance for the validation and verification of greenhouse gas assertions (ISO 14064-3:2006)
EN 16602-70-07:2014 Space product assurance - Verification and approval of automatic machine wave soldering
prEN ISO 17662 rev Welding — Calibration, verification and validation of equipment used for welding, including ancillary activities
EN ISO/IEC 17029:2019 Conformity Assessment - General principles and requirements for validation and verification bodies (ISO/IEC 17029:2019)
EN ISO 16140-6:2019 Microbiology of the food chain - Method validation - Part 6: Protocol for the validation of alternative (proprietary) methods for microbiological confirmation and typing procedures (ISO 16140-6:2019)
PD CEN/TR 10350:2009 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
EN ISO 9003:1994 Quality Systems Model for Quality Assurance in Final Inspection and Test (Supersedes EN 29003 : 1987) (ISO 9003: 1994) Superseded by EN ISO 9001:2000

International Organization for Standardization (ISO), verify or confirm

ISO 14065:2007 Greenhouse gases - Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition
ISO 14065:2013 Greenhouse gases - Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition
ISO 14017:2022 Environmental management — Requirements with guidance for verification and validation of water statements
ISO/CD TS 5083:2023 Road vehicles — Safety for automated driving systems — Design, verification and validation
ISO 17662:2005 Welding - Calibration, verification and validation of equipment used for welding, including ancillary activities
ISO 17662:2016 Welding - Calibration, verification and validation of equipment used for welding, including ancillary activities
ISO 20414:2020 Fire safety engineering - Verification and validation protocol for building fire evacuation models
ISO/CD 17662:2023 Welding — Calibration, verification and validation of equipment used for welding, including ancillary activities
ISO/TR 4804:2020 Road vehicles - Safety and cybersecurity for automated driving systems - Design, verification and validation
ISO 16140-6:2019 Microbiology of the food chain — Method validation — Part 6: Protocol for the validation of alternative (proprietary) methods for microbiological confirmation and typing procedures
ISO Guide 27:1983 Guidelines for corrective action to be taken by a certification body in the event of either misapplication of its mark of conformity to a product, or products which bear the mark of the certification body being found to subject persons or property to risk
ISO/IEC GUIDE 40:1983 General requirements for the acceptance of certification bodies
ISO/IEC TS 17023:2013 Conformity assessment.Guidelines for determining the duration of management system certification audits
ISO/IEC GUIDE 44:1985 General rules for ISO or IEC international third-party certification schemes for products
ISO 23788:2012 Metallic materials - Verification of the alignment of fatigue testing machines
ISO/IEC 18013-3:2017 Information technology - Personal identification - ISO-compliant driving licence - Part 3: Access control, authentication and integrity validation
ISO/IEC 18013-3:2009 Information technology - Personal identification - ISO-compliant driving licence - Part 3: Access control, authentication and integrity validation
ISO 6888-1:2021 Microbiology of food and animal feeding stuffs — Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) — Part 1: Technique using Baird-Par
ISO 2269:1973 Magnetic compasses and accessories — Rules for testing and certification
ISO Guide 24:1978 Guidelines for the acceptance of testing and inspection agencies by certification bodies
ISO/TS 10303-1488:2018 Industrial automation systems and integration — Product data representation and exchange — Part 1488: Application module: Verification and validation
ISO 9003:1994 Quality systems - Model for quality assurance in final inspection and test
ISO 9003:1987 Quality systems; Model for quality assurance in final inspection and test
ISO 10012-1:1992 Quality assurance requirements for measuring equipment; part 1: metrological confirmation system for measuring equipment
ISO/IEC 18013-3:2017/Amd 2:2023 Information technology — Personal identification — ISO-compliant driving licence — Part 3: Access control, authentication and integrity validation — Amendment 2: Updates for passive authentication
ISO 15746-3:2020 Automation systems and integration — Integration of advanced process control and optimization capabilities for manufacturing systems — Part 3: Verification and validation
ISO 6888-1:1999/Amd 2:2018 Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) - Part 1: Technique using Baird-Parker agar medium - Amendment 2: Inclusion of an alternat

Korean Agency for Technology and Standards (KATS), verify or confirm

KS I ISO 14065:2007 Greenhouse gases-Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition
KS C IEC 61771-2012(2022) Nuclear power plants－Main control-room－Verification and validation of design
KS I ISO 14065-2016(2021) Greenhouse gases－Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition
KS I ISO 14065:2016 Greenhouse gases－Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition
KS F ISO 16730-2012(2022) Fire safety engineering－Assessment, verification and validation of calculation methods
KS F ISO 16730-2012(2017) Fire safety engineering－Assessment, verification and validation of calculation methods
KS C IEC 60068-3-5-2008(2018) Environmental testing－Part 3-5：Supporting documentation and guidance - Confirmation of the performance of temperature chambers
KS I ISO 14064-3:2020 Greenhouse gases — Part 3: Specification with guidance for the verification and validation of greenhouse gas statements
KS V ISO 10316-2004(2009) Shipbuilding－Class B magnetic compasses－Tests and certification
KS A ISO/IEC GUIDE 68-2004(2019) Arrangements for the recognition and acceptance of conformity assessment results
KS A 10012-1-1998(2003) QUALITY ASSURANCE REQUIREMENT FOR MEASURING EQUIPMENT-PART 1: METROLOGICAL CONFIRMATION SYSTEM FOR MEASURING EQUIPMENT
KS C IEC 61400-22:2013 Wind turbines－Part 22：Conformity testing and certification
KS A ISO/IEC GUIDE 43-1-2002(2012) Proficiency testing by interlaboratory comparisons－Part 1：Development and operation of proficiency testing schemes by laboratory accreditation bodies
KS A ISO/IEC GUIDE 43-2-2002(2012) Proficiency testing by interlaboratory comparisons－Part 2：Selection and use of proficiency testing schemes by laboratory accreditation bodies

British Standards Institution (BSI), verify or confirm

BS EN ISO 14065:2012 Greenhouse gases. Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition
BS EN ISO 14065:2021 General principles and requirements for bodies validating and verifying environmental information
BS EN ISO 14065:2013 Greenhouse gases. Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition
BS EN ISO 14064-3:2006 Greenhouse gases. Specification with guidance for the validation and verification of greenhouse gas assertions
BS EN ISO 14064-3:2012 Greenhouse gases. Specification with guidance for the validation and verification of greenhouse gas assertions
BS ISO 14017:2022 Environmental management. Requirements with guidance for verification and validation of water statements
BS EN ISO 14064-3:2019 Greenhouse gases. Specification with guidance for the verification and validation of greenhouse gas statements
21/30397762 DC BS ISO 14017. Environmental management. Requirements with guidance for verification and validation of water statements
BS EN ISO 17662:2016 Welding. Calibration, verification and validation of equipment used for welding, including ancillary activities
BS ISO 16730-1:2015 Fire safety engineering. Procedures and requirements for verification and validation of calculation methods. General
PD ISO/TR 16730-3:2013 Fire safety engineering. Assessment, verification and validation of calculation methods. Example of a CFD model
BS EN ISO 16140-6:2019 Microbiology of the food chain. Method validation - Protocol for the validation of alternative (proprietary) methods for microbiological confirmation and typing procedures
PD ISO/TR 16730-4:2013 Fire safety engineering. Assessment, verification and validation of calculation methods. Example of a structural model
PD ISO/TR 16730-2:2013 Fire safety engineering. Assessment, verification and validation of calculation methods. Example of a fire zone model
PD ISO/TR 16730-5:2013 Fire safety engineering. Assessment, verification and validation of calculation methods. Example of an Egress model
BS PD ISO/TR 4804:2020 Road vehicles. Safety and cybersecurity for automated driving systems. Design, verification and validation
PD ISO/TR 4804:2020 Road vehicles. Safety and cybersecurity for automated driving systems. Design, verification and validation
20/30401290 DC BS ISO 20414. Fire safety engineering. Verification and validation protocol for building fire evacuation models
BS PD CEN/TR 10350:2009 Analysis of steels and irons — Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
PD ISO/TS 9491-1:2023 Biotechnology. Predictive computational models in personalized medicine research. Constructing, verifying and validating models
PD ISO/IEC TS 17023:2013 Conformity assessment. Guidelines for determining the duration of management system certification audits
BS EN 61400-22:2011 Wind turbines. Conformity testing and certification
BS ISO 23788:2012 Metallic materials. Verification of the alignment of fatigue testing machines
BS ISO 15746-3:2020 Automation systems and integration. Integration of advanced process control and optimization capabilities for manufacturing systems - Verification and validation
BS ISO/IEC 18013-3:2009+A1:2012 Information technology. Personal identification. Access control, authentification and integrity validation
BS ISO/IEC 9798-2:2019 IT Security techniques. Entity authentication. Mechanisms using authenticated encryption
BS 7102-2:1989 Recommendations for algorithms for use in banking message authentication. - Message Authenticator Algorithm
BS EN 473:2000 Non-destructive testing - Qualification and certification of NDT personne l. General principles
BS EN ISO 15536-2:2007 Ergonomics - Computer manikins and body templates - Verification of functions and validation of dimensions for computer manikin systems
BS ISO/IEC TR 13233:1996 Information technology - Interpretation of accreditation requirements in ISO/IEC Guide 25 - Accreditation of information technology and telecommunications testing laboratories for software and protocol testing services

Professional Standard - Aviation, verify or confirm

HB 6780-1993 Validation, verification and testing of software

RU-GOST R, verify or confirm

GOST R ISO 14065-2014 Greenhouse gases. Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition
GOST R ISO 17662-2017 Welding. Calibration, verification and validation of equipment used for welding, including ancillary activities
GOST R 56399-2015 Conformity assessment. Guidelines for determining the duration of management system certification audits
PNST 139-2016 Conformity assessment in the field of use of nuclear energy. Experts in certification of products. Requirements and order of confirmation of competence
GOST R 50.08.05-2017 Conformity assessment system for the use of nuclear energy. Experts in certification of products. Requirements and order of competence confirmation
GOST 8.326-1989 State system for ensuring the uniformity of measurements. Metrological certification measuring instruments
GOST R 50.08.07-2017 Conformity assessment system for the use of nuclear energy. The cost of the mandatory product certification and inspection. The procedure for determining
GOST R 8.690-2009 State system for ensuring the uniformity of measurements. Use of proficiency testing by interlaboratory comparisons for accreditation in testing
GOST R 51000.1-1995 Accreditation system of certification body testing and measuring laboratory. General requirements
GOST R 50.11.03-2017 Conformity assessment system for the use of nuclear energy. Experts in certification of quality management systems. Requirements and procedure of confirmation of competence
GOST 30159-1994 Wood chemical products. Provision of accuracy for testing methods
GOST R 54883-2011 Technique of services quality estimation of the accredited test laboratories and the test center
GOST R 54883-2011(2020) Technique of services quality estimation of the accredited test laboratories and the test center
GOST R 57120-2016 Conformity assessment. The use of certification scheme, based on analysis of technical documentation, in order to confirm product compliance with technical regulations of the customs union
GOST R ISO 15746-3-2021 Automation systems and integration. Integration of advanced process control and optimization capabilities for manufacturing systems. Part 3. Verification and validation

未注明发布机构, verify or confirm

DIN EN ISO 14065 E:2012-12 Greenhouse Gases Requirements for certification or other forms of recognition of greenhouse gas validation and verification bodies (draft)
DIN EN ISO 14065 E:2020-02 Greenhouse Gases Requirements for certification or other forms of recognition of greenhouse gas validation and verification bodies (draft)
ASME V&V 10-2019 Standard for Verification and Validation in Computational Solid Mechanics
ASME V&V 10.1-2012 An Illustration of the Concepts of Verification and Validation in Computational Solid Mechanics
ASME V&V 20-2009(R2021) Standard for Verification and Validation in Computational Fluid Dynamics and Heat Transfer
DIN EN ISO 14064-3 E:2017-12 Greenhouse Gases Part 3: Guidelines for Verification and Validation of Greenhouse Gas Identification (Draft)
ASME V&V 40-2018 Assessing Credibility of Computational Modeling through Verification and Validation: Application to Medical Devices
DIN EN ISO 16140-6 E:2018-02 Validation of methods in food chain microbiology Part 6: Alternatives to procedures for confirmation and typing of microorganisms (draft)
BS EN 30012-1:1994(1998)*BS 5781-1-1994, ISO 10012-1:1992 Quality assurance requirements for measuring equipment — Part 1 : Metrological confirmation system for measuring equipment
WS/T 514-2017 Establishment and verification of detection capability for clinical laboratory measurement procedures

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, verify or confirm

GJB 5234-2004 Military Software Verification and Validation
GJB 2712-1996 Quality assurance requirements for measuring equipment Metrological confirmation system
GJB 1209-1991 Test methods and procedures for microcircuit line certification

Institute of Electrical and Electronics Engineers (IEEE), verify or confirm

IEEE Std 1012-1998 IEEE Standard for Software Verification and Validation
IEEE Std 1012-2004 IEEE Standard for Software Verification and Validation
IEEE Std 1012-1998 - Redline IEEE Standard for Software Verification and Validation - Redline
IEEE Std 1012-1986 IEEE Standard for Software Verification and Validation Plans
IEEE Std 1059-1993 IEEE Guide for Software Verification and Validation Plans
IEEE Std 1012-2012 IEEE Standard for System and Software Verification and Validation
IEEE 1012-2016 IEEE Standard for System, Software, and Hardware Verification and Validation
IEEE P1012/D1.2, October 2011 IEEE Draft Standard for System and Software Verification and Validation
IEEE Std 1012-2016 IEEE Standard for System, Software, and Hardware Verification and Validation
IEEE Std 1278.4-1997 IEEE Trial-Use Recommended Practice for Distributed Interactive Simulation - Verification, Validation, and Accreditation
IEEE Std 1012a-1998 IEEE Standard for Software Verification and Validation - Content Map to IEEE 12207.1
IEEE 1730.2-2022 IEEE Recommended Practice for Verification, Validation and Acceptance/Accreditation of a Distributed Simulation: An Overlay to the Distributed Simulation Engineering and Execution Process
IEEE Std 1730.2-2022 IEEE Recommended Practice for Verification, Validation and Acceptance/Accreditation of a Distributed Simulation: An Overlay to the Distributed Simulation Engineering and Execution Process
IEEE P1012/D17, August 2015 IEEE Approved Draft Standard for System, Software and Hardware Verification and Validation
IEEE P1730.2/D1, May 2022 IEEE Draft Recommended Practice for Verification, Validation, and Acceptance/Accreditation of a Distributed Simulation--An Overlay to the Distributed Simulation Engineering and Execution Process
IEEE Std 1516.4-2007 IEEE Recommended Practice for Verification, Validation, and Accreditation of a Federationan Overlay to the High Level Architecture Federation Development and Execution Process
IEEE Std P1012/D12 Approved IEEE Draft Standard for Software Verification and Validation (Superseded by IEEE 1012-2004)
IEEE P1730.2/D2, May 2022 IEEE Approved Draft Recommended Practice for Verification, Validation, and Acceptance/Accreditation of a Distributed Simulation--An Overlay to the Distributed Simulation Engineering and Execution Process
IEEE Unapproved Draft Std P1516.4/D1.1, Jan 2007 Unapproved IEEE Draft Recommended Practice for Verification, Validation, and Accreditation of a Federation, an Overlay to the High Level Architecture Federation Development and Execution Process
IEEE Approved Draft Std P1516.4/Dx.1, Jun 07 Approved IEEE Draft Recommended Practice for Verification, Validation, and Accreditation of a Federation - an Overlay to the High Level Architecture Federation Development and Execution Process
IEEE P1012/D2, March 2017 IEEE Draft Standard for System, Software and Hardware Verification and Validation - Corrigendum 1
IEEE P1012 Corrigendum/D1, January 2017 IEEE Draft Standard for System, Software and Hardware Verification and Validation - Corrigendum 1
IEEE 1012-1986 Software verification and validation plans
IEEE 1059-1993 Guide for software verification and validation plans
IEEE 1012A-1998 Supplement to IEEE Standard for Software Verification and Validation: Content Map to IEEE/EIA 12207.1-1997 IEEE Computer Society Document

国家市场监督管理总局、中国国家标准化管理委员会, verify or confirm

GB/T 41145-2021 Human factors verification and validation for nuclear power plants
GB/T 15579.14-2021 Arc welding equipment—Part 14: Calibration, validation and consistency testing

IT-UNI, verify or confirm

ANCC S11.O-1973 Volume S11. Inspection, Validation and Certification
UNI ISO 21899:2021 Biotechnology -- Biobanking -- General requirements for the validation and verification of processing methods for biological material in biobanks

TH-TISI, verify or confirm

TIS 14065-2009 Greenhouse gases.requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, verify or confirm

GB/T 32423-2015 System and software engineering—Verification and validation
GB/T 27417-2017 Conformity assessment—Guidance on validation and verification of chemical analytical methods
GB/T 34399-2017 Temperature control facilities of pharmaceutical products cold chain logistics－Specification for performance qualification
GB/T 27204-2017 Confromity assessment—Guidelines for determining the duration of management system certification audits
GB/T 35655-2017 Guideline for verification and validation of chemical analysis method and internal quality control—Chromatography
GB/T 35656-2017 Guideline for verification and validation of chemical analysis method and internal quality control—Method on reporting qualitative test reports
GB/T 35657-2017 Guideline for verification and validation of chemical analysis method and internal quality control－Metal component analysis based on sample digestion

Professional Standard - Nuclear Industry, verify or confirm

EJ/T 1118-2000 Nuclear power plant control room design verification and validation
EJ/T 617-1991 Guidelines for verification and validation of computer programs for nuclear industry science and engineering

Military Standard of the People's Republic of China-General Armament Department, verify or confirm

GJB/Z 117-1999 Military Software Verification and Validation Program Guide
GJB 6183-2007 The general requirements for the verification, validation and accreditation of measurement of the target and environment feature
GJB 6184-2007 The general requirements for the veriflcation, validation and accreditation of modeling of the target and environment feature
GJB 9226-2017 General requirements for verification, verification and validation of military modeling and simulation models
GJB 9156-2017 General requirements for equipment demonstration simulation data verification, verification and certification

国家市场监督管理总局, verify or confirm

RB/T 033-2020 Guidelines for Validation and Validation of Microbiological Test Methods
RB/T 032-2020 Gene Amplification Test Method Validation and Validation Guide
RB/T 063-2021 Verification and validation requirements for management and technical capability evaluation methods of inspection and testing institutions
RB/T 039-2020 Testing Laboratory Instruments and Equipment Measurement Traceability Results Confirmation Guide

国家能源局, verify or confirm

NB/T 20448-2017 Verification and validation of nuclear power plant systems and software

German Institute for Standardization, verify or confirm

DIN EN ISO 14065:2013 Greenhouse gases - Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition (ISO 14065:2013); German and English version EN ISO 14065:2013
DIN EN ISO 14065:2012 Greenhouse gases - Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition (ISO 14065:2007); German and English version EN ISO 14065:2012
DIN EN ISO/IEC 17029:2020-02 Conformity Assessment - General principles and requirements for validation and verification bodies (ISO/IEC 17029:2019); German and English version EN ISO/IEC 17029:2019
DIN EN ISO 14064-3:2020-05 Greenhouse gases - Part 3: Specification with guidance for the verification and validation of greenhouse gas statements (ISO 14064-3:2019); German and English version EN ISO 14064-3:2019
DIN EN ISO 17662:2016-09 Welding - Calibration, verification and validation of equipment used for welding, including ancillary activities (ISO 17662:2016); German version EN ISO 17662:2016
DIN EN ISO 16140-6:2020-04 Microbiology of the food chain - Method validation - Part 6: Protocol for the validation of alternative (proprietary) methods for microbiological confirmation and typing procedures (ISO 16140-6:2019); German version EN ISO 16140-6:2019
DIN EN ISO 16140-6:2020 Microbiology of the food chain - Method validation - Part 6: Protocol for the validation of alternative (proprietary) methods for microbiological confirmation and typing procedures (ISO 16140-6:2019)
DIN EN ISO 14064-3:2020 Greenhouse gases - Part 3: Specification with guidance for the verification and validation of greenhouse gas statements (ISO 14064-3:2019); German and English version EN ISO 14064-3:2019
DIN 55350-18:1987 Concepts in quality and statistics; concepts relating to certificates on results of quality inspections; quality inspection certificates
DIN EN ISO 14064-3:2012 Greenhouse gases - Part 3: Specification with guidance for the validation and verification of greenhouse gas assertions (ISO 14064-3:2006); German and English version EN ISO 14064-3:2012

KR-KS, verify or confirm

KS I ISO 14065-2016 Greenhouse gases－Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition
KS I ISO 14064-3-2020 Greenhouse gases — Part 3: Specification with guidance for the verification and validation of greenhouse gas statements
KS R ISO TR 4804-2023 Road vehicles — Safety and cybersecurity for automated driving systems — Design, verification and validation
KS C IEC 61400-22-2013(2023) Wind turbines－Part 22：Conformity testing and certification

Professional Standard - Energy, verify or confirm

NB/Z 20289-2014 Guidelines for software verification and validation plan in nuclear power plants

AWS - American Welding Society, verify or confirm

A9.5-2013 Guide for Verification and Validation in Computation Weld Mechanics (1st Edition)
QC1-2007 STANDARD FOR AWS CERTIFICATION OF WELDING INSPECTORS
QC1-2006 STANDARD FOR AWS CERTIFICATION OF WELDING INSPECTORS
CM-2000 Certification Manual for Welding Inspectors (Fourth Edition)
QC1-2016 Specification for AWS Certification of Welding Inspectors (6th Edition)
QC1-1988 Standard for AWS Certification of Welding Inspectors Fourteenth Edition
QC1-1996 Standard for AWS Certification of Welding Inspectors (GO DIRECT 305/800-443-9353)
QC1-QC2-1986 AWS STANDARDS AND GUIDE FOR QUALIFICATION AND CERTIFICATION OF WELDING INSPECTORS

Indonesia Standards, verify or confirm

SNI ISO/IEC 14065:2009 Greenhouse gases Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition
SNI ISO 14064-3:2009 Greenhouse gases - Part 3: Specification with guidance for the validation and verification of greenhouse gas assertions

Group Standards of the People's Republic of China, verify or confirm

T/GAAA 0027-2019 Certification Sign of Right Confirmation of Artworks Property
T/CFLP 0013-2018 Temperature control validation of pharmaceutical refrigerated vehicles Specification for performance qualification
T/HCAA 002-2021 Guidance for verification and validation of quantitative detection methods of pesticide residues in fruits and vegetables
T/CAQI 366-2024 Clinical testing quantitative project method confirmation
T/CWAN 0052-2023 Standard for certification of welding inspectors
T/CSAC 002-2022 Specification for time-synchronized secure authentication in IPv6 deterministic transmission
T/SXCAA 002-2019 Guidelines for Validation of Motor Vehicle Inspection and Testing Software

American Society of Mechanical Engineers (ASME), verify or confirm

ASME VVUQ 1-2022 Verification, Validation, and Uncertainty Quantification Terminology in Computational Modeling and Simulation
ASME V V 20-2009(R2021) Standard for Verification and Validation in Computational Fluid Dynamics and Heat Transfer
ASME QAI-1-2010 Qualifications for Authorized Inspection
ASME SEC VIII D3 ART KD-12-2002 Article KD-12 Experimental Design Verification

Standard Association of Australia （SAA）, verify or confirm

TR 2.13-11-2007 Certified reference materials - Coal - Preparation and certification of ASCRM 013-11
TR 2.12C-3-2008 Certified reference materials - Coal - Preparation and certification of ASCRM 012C-3
TR 2.25-2003 Certified reference materials - Alumina - Preparation and certification of ASCRM 025
TR 2.26-2003 Certified reference materials - Alumina - Preparation and certification of ASCRM 026
AS/NZS 5911:2013 General guidance on verification, validation and assurance of environmental and sustainability reporting
HB 18.44-1991 Guidelines for third-party certification and accreditation - Guide 44 - General rules for ISO or IEC international third-party certification schemes for products
TR 2.11-11-2008 Certified reference materials - Coal - Preparation and certification of ASCRM 011-11 (Hardgrove grindability index)
HB 18.55-1991 Guidelines for third-party certification and accreditation - Guide 55 - Testing laboratory accreditation systems - General recommendations for operation
AS 3870:1991 Certified reference materials - General guide to material selection, preparation, testing and certification
HB 18.58-1993 Guideline for third-party certification and accreditation - Guide 58 - Calibration and testing laboratory accreditation systems - General requirements for operation and recognition
AS 60695.11.40:2006 Fire hazard testing - Test flames - Confirmatory tests - Guidance
HB 18.27-1991 Guidelines for third-party certification and accreditation - Guide 27 - Guidelines for corrective action to be taken by a certification body in the event of either misapplication of its mark of conformity to a product, or products which bear the mark of
AS 1796:2001 Certification of welders and welding supervisors
HB 18.43.2-1998 Guidelines for third-party certification and accreditation - Guide 43 - Proficiency testing by interlaboratory comparisons - Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies
AS 3998:2006 Non-destructive testing - Qualification and certification of personnel
TR 2.3-2-1993 Certified reference materials - Electrode carbon - Preparation and certification of ASCRM 003-2 (for use in Gray-King coke type test (AS 1038.12.2))
AS 3912.1:1993 Quality assurance requirements for measuring equipment Part 1 : Metrological confirmation system for measuring equipment
AS 4539.2.1:2000 Information technology - Public Key Authentication Framework (PKAF) - Assurance framework - Certification Authorities
AS 4860:2007 Knowledge-based identity authentication - Recognizing Known Customers

Professional Standard - Agriculture, verify or confirm

CNAS-TRL-011-2020 Guidelines for Validation and Validation of Chemical Analysis Methods for Light Industrial Products
GB/T 19022.1-1994 Quality Assurance Requirements for Measuring Equipment Part 1: Metrological Confirmation System for Measuring Equipment

American National Standards Institute （ANSI), verify or confirm

ANSI/MSE 50028-2013 Superior Energy Performance cm - Requirements for verification bodies for use in accreditation or other forms of recognition
ANSI/ASME V&V10-2006 V&V 10 - Guide for Verification and Validation in Computational Solid Mechanics
ANSI/ISO 14065:2007 Greenhouse gases - Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition
ANSI/ANS 41.5-2012 Verification and Validation of Radiological Data for Use in Waste Management and Environmental Remediation
ANSI/ANS 10.4-2008 Guidelines for the Verification and Validation of Scientific and Engineering Computer Programs for the Nuclear Industry
ANSI/GTEEMC MSE50028-2012 Superior Energy Performance - Requirements for verification bodies for use in accreditation or other forms of recognition
ANSI/IEEE 1012:2004 Standard for Software Verification and Validation
ANSI/TNI EL-V2-2009 General Requirements for Accreditation Bodies Accrediting Environmental Laboratories
ANSI/NETA ETT-2010 Certification of Electrical Testing Technicians (ETT)
ANSI/AWS B5.1:2003 Specification for the Qualification of Welding Inspectors
ANSI/GTESS MSE50028-2016 Superior Energy Performance – Requirements for verification bodies for use in accreditation or other forms of recognition (Georgia Tech Energy and Sustainability Services (GTESS))
ANSI/AWS A9.5:2012 Guide for Verification and Validation in Computation Weld Mechanics
ANSI/EIA 520FAOO:1992 Blank Detail Specification for Special-Use Rotary Switches of Certified Quality / Note: reaffirmation of ANSI/EIA 520FA00-1992 * Approved 1997-11-06.
ANSI/IEEE 1278.4:2002 Recommended Practice for Distributed Interactive Simulation – Verification, Validation, and Accreditation
ANSI/AMCA 230-2012 Laboratory Methods of Testing Air Circulating Fans for Rating and Certification
ANSI X9.68-2001 Digital Certificates for Mobile/Wireless and High Transaction Volume Financial Systems: Part 2: Domain Certificate Syntax
ANSI/ASME V&V20-2009 Standard for Verification and Validation in Computational Fluid Dynamics and Heat Transfer
ANSI/EIA 520F000-A:1996 Sectional Specification for Rotary Switches of Certified Quality (Low Current Capacity - 2 Amperes or Less)

GB-REG, verify or confirm

REG NASA-LLIS-1023-1997 Lessons Learned ?Computer Software/Configuration Control/Verification and Validation (V&V)
REG NASA-LLIS-1104--1999 Lessons Learned ?International Space Station Program/Hardware-Software/Qualification Testing-Verification and Validation
REG NASA-LLIS-0586-1998 Lessons Learned ?Verify Vendor Certifications of Commercial Equipment (1996)
REG NASA-LLIS-0656--2000 Lessons Learned ?Hardware Review/Certification Requirement
REG NASA-LLIS-1376--2003 Lessons Learned ?Certify Environmental Test Equipment and Facilities, and Qualify Operators (2002)
REG NASA-LLIS-3763-2011 Lessons Learned - Certifying Calibration on Test Components
REG NASA-LLIS-1379--2002 Lessons Learned ?Securing of Mishap Scene, Evidence, and Witnesses
REG NASA-LLIS-1781-2007 Lessons Learned - Verify the Proper Performance of Critical Backups
REG 7 CFR PART 75-2012 REGULATIONS FOR INSPECTION AND CERTIFICATION OF QUALITY OF AGRICULTURAL AND VEGETABLE SEEDS
REG NASA-LLIS-0536-1996 Lessons Learned - Clean Room Certified Adhesive Tapes: Silicone vs. Acrylic

ANSI - American National Standards Institute, verify or confirm

MSE 50028-2016 Superior Energy Performance – Requirements for verification bodies for use in accreditation or other forms of recognition (GTRC/GTEEMC)
MSE 50028-2013 Superior Energy Performance cm – Requirements for verification bodies for use in accreditation or other forms of recognition (GTRC/GTEEMC)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, verify or confirm

GB/T 32465-2015 Requirements for verification & validation of detection methods and internal quality control on chemical analysis
GB/T 32467-2015 Verification and validation of methods and internal quality contorl on chemical analysis.Terms and definitions
GB/T 31593.1-2015 Fire safety engineering.Part 1: Assessment, verification and validation of calculation methods
GB/T 26738-2011 Road vehicles.Brake lining friction materials.Product definition and quality assurance
GB/T 18510-2001 Guidelines for the validation of alternative methods of analysis for coal and coke
GB/T 15338-2008 Standard guide for carbon black.Validation of test method precision and bias
GB/T 15338-2012 Carbon black.Validation of test method precision and bias
GB/T 15338-1994 Standard guide for carbon black--Validation of test method precision and bias
GB/T 2424.5-2006 Enviromental tests for electric and electronic products.Confirmation of the performance of temperature chambers
GB/T 29243-2012 Information security technology.Specifications of delegated certification path construction and delegated validation for digital certificate
GB/T 2424.6-2006 Environmental testing for electric and electronic products.Confirmation of the performance of temperature/humidity chambers

Society of Automotive Engineers (SAE), verify or confirm

SAE J2940-2011 Use of Model Verification and Validation in Product Reliability and Confidence Assessments
SAE ARP5497A-2018 Modification or Replacement of Components on Dynamically Certified Seat Systems
SAE ARP7987-2021 Development, Verification, and Validation of a Thermal Model for Determining Current Derating Design Limits of Aerospace Wires and Wire Bundles
SAE ARP5497-2001 Modification or Replacement of Components on Dynamically Certified Seat Systems
SAE ARP4754-1996 Certification Considerations for Highly-Integrated or Complex Aircraft Systems
SAE J1537-1990 Validation Testing of Electric Fuel Pumps for Gasoline Fuel injection systems
SAE J1537-2013 Validation Testing of Electric Fuel Pumps for Gasoline Fuel injection systems

SAE - SAE International, verify or confirm

SAE J2940-2020 Use of Model Verification and Validation in Product Reliability and Confidence Assessments
SAE ARP5497 REV A-2018 Modification or Replacement of Components on Dynamically Certified Seat Systems
SAE J1537-2021 Validation Testing of Electric Fuel Pumps for Gasoline Fuel Injection Systems@ Recommended Practice

American Society for Testing and Materials (ASTM), verify or confirm

ASTM F3601-23 Standard Practice for Structural Finite Element Model Verification and Validation
ASTM D7108-12 Standard Guide for Establishing Qualifications for a Nuclear Coatings Specialist
ASTM D3938-18(2023) Standard Guide for Determining or Confirming Care Instructions for Apparel and Other Textile Products
ASTM D3938-07 Standard Guide for Determining or Confirming Care Instructions for Apparel and Other Textile Products
ASTM D3938-18 Standard Guide for Determining or Confirming Care Instructions for Apparel and Other Textile Products
ASTM D3938-13 Standard Guide for Determining or Confirming Care Instructions for Apparel and Other Textile Products
ASTM E2378-19 Standard Practice for the Recognition of Impaired or Retired Property Assets
ASTM D3938-00 Standard Guide for Determining or Confirming Care Instructions for Apparel and Other Textile Consumer Products
ASTM D3938-96 Standard Guide for Determining or Confirming Care Instructions for Apparel and Other Textile Consumer Products
ASTM D4537-04a Standard Guide for Establishing Procedures to Qualify and Certify Personnel Performing Coating Work Inspection in Nuclear Facilities
ASTM C1093-22 Standard Practice for Accreditation of Testing Agencies for Masonry
ASTM E2849-13 Standard Practice for Professional Certification Performance Testing
ASTM C1093-22a Standard Practice for Accreditation of Testing Agencies for Masonry
ASTM D4196-05(2011) Standard Test Method for Confirming the Sterility of Membrane Filters
ASTM E1912-98 Standard Guide for Accelerated Site Characterization for Confirmed or Suspected Petroleum Releases
ASTM E1912-98(2004) Standard Guide for Accelerated Site Characterization for Confirmed or Suspected Petroleum Releases
ASTM D4196-82(1998) Standard Test Method for Confirming the Sterility of Membrane Filters
ASTM D4196-05 Standard Test Method for Confirming the Sterility of Membrane Filters
ASTM D4196-05(2019) Standard Test Method for Confirming the Sterility of Membrane Filters
ASTM F2508-13 Standard Practice for Validation, Calibration, and Certification of Walkway Tribometers Using Reference Surfaces
ASTM F2508-12a Standard Practice for Validation, Calibration, and Certification of Walkway Tribometers Using Reference Surfaces
ASTM C1093-95(2001) Standard Practice for Accreditation of Testing Agencies for Unit Masonry
ASTM C1093-08 Standard Practice for Accreditation of Testing Agencies for Masonry
ASTM C1093-95 Standard Practice for Accreditation of Testing Agencies for Unit Masonry
ASTM C1093-15 Standard Practice for Accreditation of Testing Agencies for Masonry
ASTM C1093-15ae1 Standard Practice for Accreditation of Testing Agencies for Masonry
ASTM D7592-15 Standard Specification for Specification for Grade 94 Unleaded Aviation Gasoline Certification and Test Fuel
ASTM D4821-05 Standard Guide for Carbon Black8212;Validation of Test Method Precision and Bias
ASTM D4821-15 Standard Guide for Carbon Black—Validation of Test Method Precision and Bias
ASTM D4821-99 Standard Guide for Carbon Black8212;Validation of Test Method Precision and Bias
ASTM D4821-01a Standard Guide for Carbon Black8212;Validation of Test Method Precision and Bias
ASTM D4821-16 Standard Guide for Carbon Black&x2014;Validation of Test Method Precision and Bias

ES-UNE, verify or confirm

UNE-EN ISO/IEC 17029:2019 Conformity Assessment - General principles and requirements for validation and verification bodies (ISO/IEC 17029:2019)
UNE-EN ISO 14064-3:2019 Greenhouse gases - Part 3: Specification with guidance for the verification and validation of greenhouse gas statements (ISO 14064-3:2019)
UNE-EN ISO 17662:2016 Welding - Calibration, verification and validation of equipment used for welding, including ancillary activities (ISO 17662:2016)
UNE-EN ISO 16140-6:2020 Microbiology of the food chain - Method validation - Part 6: Protocol for the validation of alternative (proprietary) methods for microbiological confirmation and typing procedures (ISO 16140-6:2019)
UNE 14618:2017 Weld construction inspectors. Qualification and certification.

International Telecommunication Union (ITU), verify or confirm

ITU-T X.1254-2012 Entity authentication assurance framework (Study Group 17)
ITU-R QUESTION 124/6-2006 Measurement methods for the verification and validation of digital television and sound broadcasting planning procedures
ITU-R QUESTION 1246-2006 Measurement methods for the verification and validation of digital television and sound broadcasting planning procedures

CU-NC, verify or confirm

NC 90-01-46-1987 Metrological Assurance. Verification and Layout Surfaces. Methods and Means of Verification
NC 90-01-48-1987 Metroloqical Assurance Stadimeters. Methods and Means of Verification
NC 90-01-47-1987 Metrological Assurance. Control Bars. Methods and Means of Verificati
NC 90-01-22-1985 Metrological Assurance. Optimeters. Verification Methods and Means
NC 90-01-07-1985 Metrological Assurance. Depth Micrometer. Verification Methods and Means
NC 90-01-43-1984 Metrological Assurance. "TESTER" Gages. Verffication Methods and Means
NC 90-01-09-1986 Metrological Assurance Pasameters, Verification Methods and Means
NC 90-01-13-1985 Metrological Assurance. Length Measures with Divisions. Verification Methods and Means
NC 90-01-19-1985 Metrological Assurance. Depth Gager with Indicator Verification Methods and Means
NC 90-01-50-1987 Metrological Assurance. Instrumentation Microscopes Methods and Means of Verification
NC 11-86-1985 Machine Tools. Pendulum Crosscut Saw. Geometric Accuracy Verification
NC 90-01-06-1985 Metrological Assurance. Lever Micrometer. Verification Methods and Means
NC 90-01-45-1985 Metrological Assurance. Cogwheel's Normal Measuring Device. Verlfication Methods and Means
NC 90-01-53-1987 Metrological Assurance Electro-optical Range-Finders. Methods and Means of Verification
NC 90-01-59-1988 Standards System for Metrological Assurance. Anthropometers Methods and Means of Verification
NC 90-01-39-1984 Metrological Assurance. Wires and Rollers for Measuring Threads. Verification Methods and Means
NC 90-01-05-1987 Metrological Assurance. Sphere Indicator with 0,01 Division Value. Methods and Means of Verification

US-DMS, verify or confirm

DMS DI-MSSM-81752 VALID NOTICE 1-2012 Department of Defense (DOD) Modeling and Simulation (M&S) Verification and Validation (V&V) Report

Shaanxi Provincial Standard of the People's Republic of China, verify or confirm

DB61/T 1327.16-2023 Qualification Certification of Inspection and Testing Institutions Part 16: Standard Method Verification and Non-standard Method Validation Requirements
DB61/T 1327.3-2020 Qualification Accreditation of Inspection and Testing Institutions Part 3: Requirements for Confirmation of Equipment Verification and Calibration Results
DB61/T 1327.9-2021 Qualification Accreditation of Inspection and Testing Institutions Part 9: Equipment Verification Requirements

ANS - American Nuclear Society, verify or confirm

10.4-1987 Guidelines for the verification and validation of scientific and engineering computer programs for the nuclear industry
10.4-2008 verification and validation of non-safety-related scientific and engineering computer programs for the nuclear industry

American Nuclear Society (ANS), verify or confirm

ANS 10.4-2008(R2016) Guidelines for the verification and validation of scientific and engineering computer programs for the nuclear industry
ANS 10.4-1987 Guidelines for the verification and validation of scientific and engineering computer programs for the nuclear industry

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., verify or confirm

ASHRAE CH-99-12-3-1999 Correct and Proper Medical Gas Testing and Certification

GOSTR, verify or confirm

GOST R ISO 11064-7-2016 Ergonomic design of control centers. Part 7. Principles for verification and validation

Danish Standards Foundation, verify or confirm

DS/EN ISO 17662:2007 Welding - Calibration, verification and validation of equipment used for welding, including ancillary activities
DS/EN 45002:1991 General criteria for the assessment of testing laboratories
DS/ISO/IEC TS 17023:2013 Conformity assessment - Guidelines for determining the duration of management system certification audits
DS/EN 14612:2004 Space product assurance - Verification and approval of automatic machine wave soldering
DS/ISO 9003:1988 Quality systems. Model for quality assurance in final inspection and test
DS/EN 30012-1:1994 Quality assurance requirements for measuring equipment. Part 1: Metrological confirmation system for measuring equipment
DS/EN ISO 4507:2007 Sintered ferrous materials, carburized or carbonitrided - Determination and verification of case-hardening depth by a micro-hardness test

PL-PKN, verify or confirm

PN-EN ISO/IEC 17029-2020-04 P Conformity Assessment -- General principles and requirements for validation and verification bodies (ISO/IEC 17029:2019)

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, verify or confirm

QUESTION 124/6-2006 Measurement methods for the verification and validation of digital television and sound broadcasting planning procedures

VN-TCVN, verify or confirm

TCVN 6782-2000 Charge controllers for small standalone photovoltaic power systems.Design qualification and type approval
TCVN 6700-1-2000 Approval testing of welders.Fusion welding.Part 1: Steels
TCVN 6923-2001 Road vehicles.Horns.Requirements and test methods in type approval
TCVN 6700-3-2011 Approval testing of welders.Fusion welding.Part 3: Copper and copper alloys
TCVN 6700-4-2011 Approval testing of welders.Fusion welding.Part 4: Nickel and nickel alloys

ZA-SANS, verify or confirm

SANS 14065:2007 Greenhouse gases - Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition
SANS 20089:2006 Uniform prescriptions for approval of: I Vehicles with regard to limitation of their maximum speed or their adjustable speed limitation function; II Vehicles with regard to the installation of a speed limiting device (SLD) or adjustable speed limitation d

Canadian Standards Association (CSA), verify or confirm

CSA DIR.011-1996-1996 Certified Concrete Laboratory List
CSA W178.2-08-2008 Certification of Welding Inspectors Fifth Edition
CSA W178.2-01-2001 Certification of Welding Inspectors Fourth Edition
CAN/CSA-ISO 14064-3:2006 Greenhouse gases — Part 3: Specification with guidance for the validation and verification of greenhouse gas assertions (First Edition)
CSA W178.1-08-2008 Certification of Welding Inspection Organizations Fifth Edition
CSA W178.1-02-2002 Certification of Welding Inspection Organizations Fourth Edition
CSA ISO 10012-1-97-CAN/CSA:1997 Quality Assurance Requirements for Measuring Equipment - Part 1: Metrological Confirmation System for Measuring Equipment R(2002)

Taiwan Provincial Standard of the People's Republic of China, verify or confirm

CNS 12667-1990 Method of Test for Qualification of Welding Procedure
CNS 13124-1992 General Requirements for The Acceptance of Inspection Bodies
CNS 13041-1995 Calibration and Testing Laboratory Qccreditation System - General Requirements for Operation and Recognition
CNS 13123-1992 General Requirements for The Acceptance of Testing Laboratories
CNS 14119-1998 General requirements for assessment and accreditation of certification/registration bodies
CNS 12404-1988 Method of Qualification Test for Sphere Holder Welding Procedure
CNS 9803-2001 Welding procedure qualification test for pressure vessels
CNS 14731-2003 Guidelines for the accreditation of bodies operating certification/registration of information security management systems
CNS 13004-1992 Method of Welding Procedure Qualification Test for Stainless-clad steels
CNS 13827-1997 Quality Assurance Requirements for Measuring Equipment-Part 1:Metrological Confirmation System for Measuring Equipment

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), verify or confirm

ASHRAE NA-04-7-1-2004 Using Certification Data of Cleanrooms to Determine Degradation and Retrofit

Compressed Gas Association (U.S.), verify or confirm

CGA M-13-2008 Certifying third-party testing laboratories
CGA M-13-2014 Certifying third-party testing laboratories

American Welding Society (AWS), verify or confirm

AWS QC1-1996 Standard for AWS Certification of Welding Inspectors
AWS QC1 PORTUGUESE-2007 Welding Inspector AWS Certification Standard
AWS QC1-2007 STANDARD FOR AWS CERTIFICATION OF WELDING INSPECTORS [Superseded: AWS QC1-QC2]
AWS QC1-2016 Specification for AWS Certification of Welding Inspectors (6th Edition)
AWS QC1 SPANISH-2007 Soldadura Inspector AWS Certification Specifications

NZ-SNZ, verify or confirm

SANZ/SAA HB 18.44-1991 Guidelines for Third-Party Certification and Accreditation Guide 44 - General Rules for ISO or IEC International Third-Party Certification Schemes for Products (ISO/IEC Guide 44: 1985)
SANZ/SAA HB 18.27-1991 Guidelines for Third-Party Certification and Accreditation Guide 27 - Guidelines for Corrective Action to Be Taken by a Certification Body in the Event of Either Misapplication of Its Mark of Conformity to a Product, or Products Which Bear the Mark of the

Henan Provincial Standard of the People's Republic of China, verify or confirm

DB41/T 2454-2023 Technical Specifications for Validity Confirmation of Verification and Calibration Certificates for Measuring Instruments

Lithuanian Standards Office , verify or confirm

LST EN ISO 17662:2005 Welding - Calibration, verification and validation of equipment used for welding, including ancillary activities (ISO 17662:2005)
LST EN ISO 14064-3:2012 Greenhouse gases - Part 3: Specification with guidance for the validation and verification of greenhouse gas assertions (ISO 14064-3:2006)
LST EN 14612-2004 Space product assurance - Verification and approval of automatic machine wave soldering

AT-ON, verify or confirm

ONORM EN 45003-1990 General criteria for laboratory accreditation bodies

HU-MSZT, verify or confirm

MSZ 1303-1959 Single-axle tractor certification acceptance testing

AENOR, verify or confirm

UNE-EN ISO 14064-3:2012 Greenhouse gases - Part 3: Specification with guidance for the validation and verification of greenhouse gas assertions (ISO 14064-3:2006)
UNE-ISO 16730-1:2017 Fire safety engineering . Procedures and requirements for verification and validation of calculation methods . Part 1: General
UNE-ISO/IEC TS 17023:2014 Conformity assessment -- Guidelines for determining the duration of management system certification audits

NATO - North Atlantic Treaty Organization, verify or confirm

AEP-4754 VOL VII-2018 NATO GENERIC VEHICLE ARCHITECTURE (NGVA) FOR LAND SYSTEMS VOLUME VII: VERIFICATION AND VALIDATION (ED A@ Ver. 1)

US-CFR-file, verify or confirm

CFR 9-391.5-2014 Animals and animal products. Part391:Fees and charges for inspection services and laboratory accreditation. Section391.5:Laboratory accreditation fees.
CFR 14-139.115-2013 Aeronautics and space. Part139:Certification of airports. Section139.115:Falsification, reproduction, or alteration of applications, certificates, reports, or records.
CFR 7-51.2080-2013 Agriculture. Part51:Fresh fruits, vegetables and other products 12(inspection, certification, and standards). Section51.2080:Determination of grade.
CFR 46-115.801-2014 Shipping. Part115:Inspection and certification. Section115.802:Hull.
CFR 46-13.123-2013 Shipping. Part13:Certification of tankermen. Section13.123:Recency of service or experience for original tankerman endorsement.

SE-SIS, verify or confirm

SIS SS-EN 45 003-1989 General Criteria for laborator/ accreditation bodies

DE-VDA, verify or confirm

VDA 307-2013 EKB 3010 - Brake Noise Dyno Test Certification

NO-SN, verify or confirm

NS 477-2012 Welding inspectors - Tasks, education and certification
NS-ISO 10012-1:1993 Quality assurance requirements for measuring equipment. Part 1: Metrological confirmation system for measuring equipment

Professional Standard - Railway, verify or confirm

TB/T 2745-2002 Qualification test of diesel engine for power plant
TB/T 2745-2002/XG1-2002 Qualification test of diesel engine for power plant

IX-FAO, verify or confirm

CAC/GL 20-1995(En) Food import and export inspection and certification principles
CAC/GL 20-1995,Rev.1995(Ch) Food import and export inspection and certification principles
CAC/GL 26-1997(En) Guidelines for the development, implementation, evaluation and recognition of food import and export inspection and certification systems
CAC/GL 26-1997(Ch) Guidelines for the development, implementation, evaluation and recognition of food import and export inspection and certification systems

国家铁路局, verify or confirm

TB/T 2745-2017 Diesel engine certification test for power plant

CH-SNV, verify or confirm

SN EN ISO 16140-6:2021 Microbiology of the food chain - Method validation - Part 6: Protocol for the validation of alternative (proprietary) methods for microbiological confirmation and typing procedures (ISO 16140-6:2019)

Japanese Industrial Standards Committee (JISC), verify or confirm

JIS C 1609-2:2008 Illuminance meters -- Part 2: Measuring instruments used in transaction or certification
JIS B 7505-2:2008 Aneroid pressure gauges -- Part 2: Measuring instruments used in transaction or certification
JIS B 7505-2:2013 Aneroid pressure gauges .Part 2: Measuring instruments used in transaction or certification
JIS B 7505-2:2015 Aneroid pressure gauges -- Part 2: Measuring instruments used in transaction or certification
JIS C 1263-2:2009 Var-hour meters -- Part 2: Measuring instruments used in transaction or certification
JIS C 1283-2:2017 Maximum demand meter -- Part 2: Measuring instruments used in transaction or certification
JIS Z 2305:2001 Non-destructive testing -- Qualification and certification of personnel
JIS B 7505-3:2008 Aneroid pressure gauges -- Part 3: Electronic measuring instruments used in transaction or certification
JIS B 7728:2013 Calibration of force-proving instruments used for the verification of uniaxial testing machines
JIS B 7728:2002 Calibration of force-proving instruments used for the verification of uniaxial testing machines
JIS B 7959:2015 Gas analyzers of ambient and emission gas used in transaction or certification
JIS B 8570-2:2007 Meters for cold water and hot water -- Part 2 : Measuring instruments used in transaction or certification
JIS B 8570-2:2009 Meters for cold water and hot water -- Part 2 : Measuring instruments used in transaction or certification
JIS B 8570-2:2013 Meters for cold water and hot water -- Part 2: Measuring instruments used in transaction or certification
JIS B 7505-2:2022 Aneroid pressure gauges -- Part 2: Measuring instruments used in transaction or certification
JIS C 1400-22:2014 Wind turbines.Part 22: Conformity testing and certification
JIS Q 14065:2011 Greenhouse gases -- Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition
JIS C 1263-2 AMD 1:2014 Var-hour meters -- Part 2: Measuring instruments used in transaction or certification (Amendment 1)
JIS C 1211-2:2009 Alternating-current watt-hour meters (for direct connection) -- Part 2: Measuring instruments used in transaction or certification
JIS C 1736-2:2009 Instrument transformers for metering service -- Part 2: Measuring instruments used in transaction or certification
JIS C 1273-2:2017 Alternating-current static meters for reactive energy -- Part 2: Measuring instruments used in transaction or certification

RO-ASRO, verify or confirm

STAS 9745-1979 HEADLAMPS WITH DRIVING AND/OR PASSING LIGHTS Prescriptions for international homologation
STAS SR EN 30012-1/C1-1996 Quality assurance requirements for measuring equipment Part 1: Metrotogical confirmation system for measuring equipment
STAS SR EN 30012-1-1995 Quality assurance requirements for measuring equipment. Part 1: Metrological confirmation system for measuring equipment

Professional Standard - Public Safety Standards, verify or confirm

GA/T 1649-2019 Validation specification for forensic toxicology test methods

TIA - Telecommunications Industry Association, verify or confirm

TSB46-1993 Recommended Minimum Procedures for Validation of Authentication of IS-54-B Mobile Stations

International Electrotechnical Commission (IEC), verify or confirm

IEC CABPUB/73/DTS:2013 ISO/IEC DTS 17023: Conformity assessment - Guidelines for determining duration of management system certification audits
IEC TS 60695-11-40:2021 Fire hazard testing - Part 11-40: Test flames - Confirmatory tests - Guidance
IEC 61400-22:2010 Wind turbines - Part 22: Conformity testing and certification
IEC 61811-50:1997 Electromechanical all-or-nothing relays - Part 50: Sectional specification - Electromechanical all-or-nothing telecom relays of assessed quality

Professional Standard - Commodity Inspection, verify or confirm

SN/T 3266-2012 Guideline for validation of food microbiological test methods

Shanxi Provincial Standard of the People's Republic of China, verify or confirm

DB14/T 2797-2023 Specifications for confirmation of chemical analysis methods in testing laboratories

BELST, verify or confirm

STB 34.101.81-2019 Information technology and security. Data validation and certification server protocols
STB 941.3-93 System of accreditation of verification ant testing laboratory of Belarus. General requirements for estimation of technical competence verification and testing laboratory
STB 941.5-96 System of accreditation and testing laboratories of Belarus. Experts on attestation of calibration and testing laboratories

US-FCR, verify or confirm

FCR 40 CFR PART 194-2011 CRITERIA FOR THE CERTIFICATION AND RE-CERTIFICATION OF THE WASTE ISOLATION PILOT PLANT’S COMPLIANCE WITH THE 40 CFR PART 191 DISPOSAL REGULATIONS
FCR 40 CFR PART 194-2014 CRITERIA FOR THE CERTIFICATION AND RE-CERTIFICATION OF THE WASTE ISOLATION PILOT PLANT’S COMPLIANCE WITH THE 40 CFR PART 191 DISPOSAL REGULATIONS
FCR 40 CFR PART 194-2015 CRITERIA FOR THE CERTIFICATION AND RE-CERTIFICATION OF THE WASTE ISOLATION PILOT PLANT’S COMPLIANCE WITH THE 40 CFR PART 191 DISPOSAL REGULATIONS
FCR AF AFI AFMC 21-108-2003 MAINTENANCE TRAINING & PRODUCTION ACCEPTANCE CERTIFICATION (PAC) PROGRAM

Jiangxi Provincial Standard of the People's Republic of China, verify or confirm

DB36/T 1893-2023 Inspection and Testing Data Asset Assessment Certification Guide

未注明发布机构, verify or confirm

DIN EN ISO 14065 E:2012-12 Greenhouse Gases Requirements for certification or other forms of recognition of greenhouse gas validation and verification bodies (draft)
DIN EN ISO 14065 E:2020-02 Greenhouse Gases Requirements for certification or other forms of recognition of greenhouse gas validation and verification bodies (draft)
ASME V&V 10-2019 Standard for Verification and Validation in Computational Solid Mechanics
ASME V&V 10.1-2012 An Illustration of the Concepts of Verification and Validation in Computational Solid Mechanics
ASME V&V 20-2009(R2021) Standard for Verification and Validation in Computational Fluid Dynamics and Heat Transfer
DIN EN ISO 14064-3 E:2017-12 Greenhouse Gases Part 3: Guidelines for Verification and Validation of Greenhouse Gas Identification (Draft)
ASME V&V 40-2018 Assessing Credibility of Computational Modeling through Verification and Validation: Application to Medical Devices
DIN EN ISO 16140-6 E:2018-02 Validation of methods in food chain microbiology Part 6: Alternatives to procedures for confirmation and typing of microorganisms (draft)
BS EN 30012-1:1994(1998)*BS 5781-1-1994, ISO 10012-1:1992 Quality assurance requirements for measuring equipment — Part 1 : Metrological confirmation system for measuring equipment
WS/T 514-2017 Establishment and verification of detection capability for clinical laboratory measurement procedures

US-RTCA, verify or confirm

RTCA DO-342-2013 Guidelines for Verification and Validation of Aerodrome Mapping Databases (AMDB) Aerodrome Surface Routing Networks (ASRN) for Routing Applications

国家质量监督检验检疫总局, verify or confirm

SN/T 2991.5-2016 Inspection and Quarantine Business Information Data Element Specification Part 5: Certification and Accreditation Category

US-Unspecified Preparing Activity, verify or confirm

DI-SAFT-81933-2013 Critical Safety Item Inspection and Material Certification Report

YU-JUS, verify or confirm

JUS ISO 10012-1:1993 Quality assurance requirements for measuring equipment. Part 1: Metrological confirmation system for measuring equipment

CZ-CSN, verify or confirm

CSN 01 5252-1988 Mutually delivered products quality as-sessment and certiíication systém Documcnt on the results of testing labora-tory (center) assessment and testimony on testing laboratory (center) accreditation The lay-out of forms and the way of filling in

European Committee for Electrotechnical Standardization（CENELEC）, verify or confirm

EN 61400-22:2011 Wind turbines - Part 22: Conformity testing and certification

ECSS - European Cooperation for Space Standardization, verify or confirm

Q-ST-70-07C-2010 Verification and approval of automatic machine wave soldering (Second Issue)

ECIA - Electronic Components Industry Association, verify or confirm

520F000-A-1996 Sectional Specification for Rotary Switches of Certified Quality (Low Current Capacity - 2 Amperes or Less)

IX-ISO/IEC, verify or confirm

ISO/IEC 18013-3:2009/Cor 2:2013 Corrigendum 2 - Information technology -- Personal identification -- ISO-compliant driving licence -- Part 3: Access control, authentication and integrity validation

Canadian General Standards Board （CGSB), verify or confirm

CGSB 48.9712-2006-CAN/CGSB-2006 Non-Destructive Testing - Qualification and Certification of Personnel