ZH
RU
ES

voc multiple replacement

voc multiple replacement, Total:205 items.

In the international standard classification, voc multiple replacement involves: Aircraft and space vehicles in general, Aerospace engines and propulsion systems, Electrical engineering in general, Farming and forestry, Technical drawings, Plastics, Environmental protection, Precision mechanics, Powder metallurgy, Small craft, Rubber, Elements of buildings, Paper and board, Air quality, Measurement of volume, mass, density, viscosity, Quality, Metrology and measurement in general, Milk and milk products, Ferrous metals, Burners. Boilers, Construction materials, Road vehicles in general, Protection against fire, Medical equipment, Protection of and in buildings, Installations in buildings, Products of the chemical industry, Materials for aerospace construction, Pulps, Iron and steel products, Radiation measurements, Non-ferrous metals, Shipbuilding and marine structures in general, Fuels, Optics and optical measurements, Water quality, Footwear, Metalliferous minerals, Fibre optic communications, Analytical chemistry, Surface treatment and coating, Protective equipment, Non-metalliferous minerals, Refractories, Telecontrol. Telemetering, Sterilization and disinfection, Transport, Acoustics and acoustic measurements, Energy and heat transfer engineering in general, Rubber and plastics products, Welding, brazing and soldering, Fluid power systems.


Military Standards (MIL-STD), voc multiple replacement

Society of Automotive Engineers (SAE), voc multiple replacement

  • SAE AIR951A-1998 Spark Energy Measurement, Alternative Methods
  • SAE AIR951-1992 SPARK ENERGY MEASUREMENT, ALTERNATIVE METHODS
  • SAE AMS-G-81827-2001 Grease, Aircraft, High Load Capacity, Wide Temperature Range Replaces MIL-G-81827
  • SAE ARP5889-2008 Alternative (Ecological) Method for Measuring Electronic Product Immunity to External Electromagnetic Fields
  • SAE ARP5889A-2023 Alternative (Ecological) Method for Measuring Electronic Product Immunity to External Electromagnetic Fields

SAE - SAE International, voc multiple replacement

PT-IPQ, voc multiple replacement

National Electrical Manufacturers Association（NEMA), voc multiple replacement

  • NEMA C12.5-1978 Thermal Demand Meters
  • NEMA C82.2-2002 For Lamp Ballasts - Method of Measurement of Fluorescent Lamp Ballasts
  • NEMA C82.6-2005 for lamp ballasts - Ballasts for High-Intensity Discharge Lamps - Methods of Measurement

International Commission on Illumination (CIE), voc multiple replacement

(U.S.) Ford Automotive Standards, voc multiple replacement

  • FORD FLTM AJ 102-01-2000 DETERMINATION OF SOLVENT CONTENT OF RUST PREVENTIVE COMPOUNDS Replaces FLTM AJ 002-01 [Replaced: FORD FLTM AJ 002-01]
  • FORD FLTM AN 105-01-2001 DETERMINATION OF FINISH CONTENT OF SEWING THREAD Replaces FLTM EU-AN 005-01 [Replaced: FORD FLTM AN 005-01]
  • FORD FLTM AP 150-04-2001 POLYMERIC MATERIALS - EXTRACTABLES CONTENT (Replaces FLTM EU-AP 050-04)
  • FORD FLTM AQ 101-02-2001 DETERMINATION OF PHOSPHATE COATING WEIGHTS CAUSTIC SODA METHOD Replaces FLTM EU-AQ 001-02 [Replaced: FORD FLTM EU-AQ 001-02]
  • FORD FLTM BI 101-02-2001 MEASUREMENT OF CONTRAST RATIO OF PAINT DRY HIDING POWER Replaces FLTM BI 001-02 [Replaced: FORD FLTM BI 001-02]
  • FORD FLTM EU-BS 005-01-2000 DETERMINATION OF FLEXURAL STRENGTH AND THE ELASTICITY MODULUS Replaces FLTM EU-BS 050-01 [Replaced: FORD FLTM EU-BS 050-01]
  • FORD FLTM BI 154-02-2001 DETERMINATION OF THE VOLUME OF NON-VOLATILE SOLIDS IN PAINT Replaces FLTM EU-BI 054-02 [Replaced: FORD FLTM EU-BI 054-02]
  • FORD FLTM AQ 105-01-2001 DETERMINATION OF CHROMIUM OXIDE COATING WEIGHTS Replaces FLTM EU-AQ 005-01 [Replaced: FORD FLTM AQ 005-01, FORD FLTM EU-AQ 005-01]
  • FORD FLTM AN 103-01-2001 DETERMINATION OF SIZING CONTENT OF TEXTILE MATERIALS Replaces FLTM EU-AN 003-01 [Replaced: FORD FLTM AN 003-01, FORD FLTM EU-AN 003-01]
  • FORD FLTM AQ 101-01-2001 DETERMINATION OF PHOSPHATE COATING WEIGHTS - CHROMIC ACID METHOD Replaces FLTM EU-AQ 001-01 [Replaced: FORD FLTM AQ 001-01, FORD FLTM EU-AQ 001-01]
  • FORD FLTM BO 124-04-2001 DETERMINATION OF MOISTURE IN POLYVINYL BUTYRAL BY GRAVIMETRIC DESICCATION (Replaces FLTM BO 024-04)
  • FORD FLTM BI 158-1-2000 MEASUREMENT OF DRY HIDING POWER OF PAINTS (Replaces FLTM EU-BI 058-01)
  • FORD FLTM BI 102-01-2001 DETERMINATION OF WEIGHT OF NON-VOLATILE CONTENT IN PAINT Replaces FLTM BI 002-01, FLTM EU-BI 002-01 [Replaced: FORD FLTM BI 002-01, FORD FLTM EU-BI 002-01]
  • FORD FLTM AQ 105-1-2001 DETERMINATION OF CHROMIUM OXIDE COATING WEIGHTS (Replaces FLTM EU-AQ 005-01)
  • FORD FLTM BI 117-1-2001 THICKNESS MEASUREMENT OF PAINT FILMS (Replaces FLTM BI 017-01, FLTM EU-BI 017-01)
  • FORD FLTM AQ 101-03-2001 DETERMINATION OF ZINC OR MANGANESE PHOSPHATE COATING WEIGHTS ON GALVANIZED& COLD ROLLED STEEL Replaces FLTM EU-AQ 001-03 [Replaced: FORD FLTM AQ 001-03]
  • FORD FLTM BV 150-12-2001 DETERMINATION OF BINDER CONTENT AND FIBER DIAMETER OF FIBER GLASS MATS (Replaces FLTM EU-BV 050-12)
  • FORD FLTM BI 117-01-2001 THICKNESS MEASUREMENT OF PAINT FILMS Replaces FLTM BI 017-01, FLTM EU-BI 017-01
  • FORD FLTM BI 101-2-2001 MEASUREMENT OF CONTRAST RATIO OF PAINT DRY HIDING POWER (Replaces FLTM BI 001-02)
  • FORD FLTM BV 160-3-2001 MEASUREMENT OF "ACOUSTICAL PERFORMANCE" OF SOUND-DEADENING MATERIALS (Replaces FLTM EU-BV 060-03)
  • FORD FLTM AJ 102-1-2000 DETERMINATION OF SOLVENT CONTENT OF RUST PREVENTIVE COMPOUNDS (Replaces FLTM AJ 002-01)
  • FORD FLTM AN 103-1-2001 DETERMINATION OF SIZING CONTENT OF TEXTILE MATERIALS (Replaces FLTM EU-AN 003-01)
  • FORD WSS-M33J6-B1-1997 ENAMEL, COMPLIANCE VOC, MEDIUM SOLIDS, THERMOSET CLEARCOAT, BASECOAT/CLEARCOAT WET-ON-WET PROCESS, EXTERIOR (Shown on WSS-M33J6-A1)
  • FORD WSS-M33J6-C1-1997 ENAMEL, COMPLIANCE VOC, HIGH SOLIDS, THERMOSET CLEARCOAT, BASECOAT/CLEARCOAT WET-ON-WET PROCESS, EXTERIOR (Shown on WSS-M33J6-A1)
  • FORD FLTM BI 120-08-2001 DETERMINATION OF NON-VOLATILE CONTENT OF ELECTROCOATING MATERIAL (Replaces FLTM BI 020-08, FLTM EU-BI 020-08)
  • FORD FLTM BV 150-10-2001 DETERMINATION OF SOLIDS AND ASH CONTENT OF ADHESIVES, SEALERS, AND SOUND DEADENERS (Replaces FLTM EU-BV 050-10)
  • FORD FLTM EU-BS 005-1-2000 DETERMINATION OF FLEXURAL STRENGTH AND THE ELASTICITY MODULUS (Replaces FLTM EU-BS 050-01)
  • FORD FLTM AQ 101-1-2001 DETERMINATION OF PHOSPHATE COATING WEIGHTS - CHROMIC ACID METHOD (Replaces FLTM EU-AQ 001-01)
  • FORD FLTM BI 101-3-2001 MEASUREMENT OF DRY HIDING POWER OF PAINTS (Replaces FLTM BI 001-03, FLTM EU-BI 001-003)
  • FORD WSS-M33J6-B2-1997 ENAMEL, COMPLIANCE VOC, MEDIUM SOLIDS, THERMOSET TINTED CLEARCOAT, BASECOAT/CLEARCOAT WET-ON-WET PROCESS, EXTERIOR (Shown on WSS-M33J6-A1)
  • FORD WSS-M33J6-C2-1997 ENAMEL, COMPLIANCE VOC, HIGH SOLIDS, THERMOSET TINTED CLEARCOAT, BASECOAT/CLEARCOAT WET-ON-WET PROCESS, EXTERIOR (Shown on WSS-M33J6-A1)
  • FORD FLTM AQ 101-2-2001 DETERMINATION OF PHOSPHATE COATING WEIGHTS CAUSTIC SODA METHOD (Replaces FLTM EU-AQ 001-02)
  • FORD FLTM AN 102-2-2001 DETERMINATION OF WEIGHT OF COMPONENTS IN POLYETHYLENE-BACKED CARPET (Replaces FLTM EU-AN 002-02)
  • FORD WSS-M33J6-B3-1997 ENAMEL, COMPLIANCE VOC, MEDIUM SOLIDS, THEMOSET CLEARCOAT, BASECOAT/CLEARCOAT WET-ON-WET PROCESS, ETCH RESISTANT, EXTERIOR (Shown on WSS-M33J6-A1)
  • FORD FLTM BI 101-1-2001 MEASUREMENT OF HIDING POWER OF PAINT - CRYPTOMETER METHOD (Replaces FLTM BI 001-01, FLTM EU-BI 001-01)
  • FORD WSS-M33J6-B4-1997 ENAMEL, COMPLIANCE VOC, MEDIUM SOLIDS, THERMOSET TINTED CLEARCOAT, BASECOAT/CLEARCOAT WET-ON-WET PROCESS, ETCH RESISTANT, EXTERIOR (Shown on WSS-M33J6-A1)
  • FORD WSS-M33J6-C3-1997 ENAMEL, COMPLIANCE VOC, HIGH SOLIDS, THERMOSET CLEARCOAT, BASECOAT/CLEARCOAT WET-ON-WET PROCESS, ETCH RESISTANT, EXTERIOR (Shown on WSS-M33J6-A1)
  • FORD FLTM BI 102-1-2001 DETERMINATION OF WEIGHT OF NON-VOLATILE CONTENT IN PAINT (Replaces FLTM BI 002-01, FLTM EU-BI 002-01)
  • FORD W-GA0-1999 GAUGING

Group Standards of the People's Republic of China, voc multiple replacement

  • T/CES 009-2018 Guidelines for the statistics and calculation of alternative electricity
  • T/CEC 134-2017 Approval method for emission reduction of electric energy substitution projects
  • T/ACEF 060-2023 Accounting Guidelines for Carbon Emission Reduction of Plastic Packaging Alternative Materials
  • T/CAS 537-2021 Guideline of greenhouse gas emission reductions accounting on alternative travelling by new energy vehicles
  • T/CAS 536-2021 Technical specification for assessment of greenhouse gas emission reductions on alternative travelling by new energy vehicles
  • T/CSTE 0073-2020 Accounting Guidance for non-CO2 GHG Emission Reduction from Fertilizer Replacement from Pig Manure Resource

Natural Gas Processor's Association (NGPA), voc multiple replacement

  • GPA RR-30-1978 High Temperature V-L-E Measurements for Substitute Gas Components

National Aeronautics and Space Administration (NASA), voc multiple replacement

Canadian General Standards Board （CGSB), voc multiple replacement

American Gear Manufacturers Association, voc multiple replacement

GM North America, voc multiple replacement

  • GM GM216M-2003 Recoverable Energy Absorbing Foam Replaced by GMN8351
  • GMN11342-2010 Quality and Chrome Plater Approval Process Do Not Use on New Programs: Replaced by GMW16193
  • GM C200-2011 Penetration Gages and Gaging for Type 1A Cross Recesses (Issue 2; Do Not Use on New Programs; No Replacement)
  • GM C210-2011 Penetration Gages and Gaging for Metric 6-Lobed Sockets (Issue 2; Do Not Use on New Programs; No Replacement)
  • GM GMP.PBTP+PETP.003-1998 PBTP+PETP - 40% Glass Fiber Reinforced/Mineral Filled, 9600 MPa Flexural Modulus Replaced by GMP.PBT+PET.003
  • GM GM9842P-2002 Measurement Of Acoustic Output Of Dynamic Trim And Sealing Components Involved In Shear Movement Replaces GM9840P
  • GM GMP.E/P.039-2011 Polyolefin Alloy - 700 MPa Flexural Modulus (Issue 4; Do Not Use on New Programs; No Replacement)
  • GM GM9037P-2011 Test for Measuring Expansion of Sealers (Issue 7; Do Not Use on New Programs; Replaced by GMW15481)

Hubei Provincial Standard of the People's Republic of China, voc multiple replacement

  • DB4210/T 24-2017 Cotton Field Chemical Fertilizer Substitution Production Technical Regulations

United States Navy, voc multiple replacement

  • NAVY NAV MIL-HDBK-1001/1 NOTICE 1-1997 BASIC ARCHITECTURAL REQUIREMENTS AND DESIGN CONSIDERATIONS (SUPERSEDES NAV DM-01.01)
  • NAVY MIL-PRF-24623 C-2001 SPLICE, FIBER OPTIC CABLE, GENERAL SPECIFICATION FOR (METRIC) [Use In Lieu Of: NAVY MIL-S-0024623 A]
  • NAVY MIL-PRF-81757/17-2009 BATTERY, STORAGE, AIRCRAFT, NICKEL-CADMIUM, HIGH-RATE, TYPE 2, 24-VOLT, 35-AMPERE-HOUR, CHARGE CONTROLLED [Superseded: NAVY MIL-B-8565/10 CANC NOTICE 2, NAVY MIL-B-8565/10 NOTICE 1, NAVY MIL-B-8565/10]
  • NAVY MIL-E-7016 F VALID NOTICE 1-1988 ELECTRIC LOAD AND POWER SOURCE CAPACITY, AIRCRAFT, ANALYSIS OF [Use In Lieu Of: NAVY MIL-E-007016 E]
  • NAVY MIL-P-81653 B-1980 POWER CONTROLLER, SOLID STATE, GENERAL SPECIFICATION FOR [Use In Lieu Of: NAVY MIL-P-0081653 C CANC NOTICE 1]
  • NAVY MIL-B-15606 H-1983 BRICKS, REFRACTORY, AND BURNER TILE, NAVAL BOILER LINING QUALITY [Use In Lieu Of: NAVY MIL-B-0015606 D (1)]

Aerospace, Security and Defence Industries Association of Europe (ASD), voc multiple replacement

  • ASD-STAN PREN 9133-2002 Aerospace series Quality management systems Qualification Procedure for Aerospace Standard Parts (Edition P 1; Supersedes EN 3042: 1991)

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., voc multiple replacement

  • ASHRAE SE-99-19-03-1999 Alternative Approach to Measuring the Critical Flammability Ratio of R-125/R-32
  • ASHRAE 4103-1998 Environmental Quality in Animal Production Housing Facilities: A Review and Evaluation of Alternative Ventilation Strategies (RP-784)

General Motors do Brasil, voc multiple replacement

American Society of Quality Control （ASQC), voc multiple replacement

  • ASQ Q9000-1-1994 Quality Management and Quality Assurance Standards - Guidelines for Selection and Use

Association Francaise de Normalisation, voc multiple replacement

  • NF EN ISO 8655-7:2022 Appareils volumétriques à piston - Partie 7 : Modes opératoires de mesure alternatifs pour la détermination de volumes
  • NF A06-314*NF EN ISO 10280:1995 Steel and iron. Determination of titanium content. Diantipyrylmethane spectrophotometric method.
  • NF ISO 8196-3:2022 Lait - Définition et évaluation de la précision globale des méthodes alternatives d'analyse du lait - Partie 3 : Protocole d'évaluation et de validation des méthodes quantitatives alternatives pour l'analyse du lait
  • NF EN ISO 18854:2015 Petits navires - Moteurs alternatifs à combustion interne mesurage des émissions de gaz d'échappement - Mesurage des émissions de gaz et de particules au banc

German Institute for Standardization, voc multiple replacement

  • DIN EN ISO 8655-7:2022-11 Piston-operated volumetric apparatus - Part 7: Alternative measurement procedures for the determination of volume (ISO 8655-7:2022); German version EN ISO 8655-7:2022
  • DIN EN ISO 10280:1996 Steel and iron - Determination of titanium content - Diantipyrylmethane spectrophotometric method (ISO 10280:1991); German version EN ISO 10280:1995

GM Europe, voc multiple replacement

  • GME QK 001141-1996 Polyamid 66 mit 35 Massenanteil in % Glasfasern Polyamide 66 with Glass Fibres English/German [Replaced: GME QK 000119]
  • GME QK 000028-1988 Polypropylen-Homopolymerisat 30 Massenanteil in % Glasfasern Polypropylene-Homopolymer 30 % by Mass Glass Fibres English/German [Replaced: GME QK 000026]

Instrument Society of America (ISA), voc multiple replacement

AENOR, voc multiple replacement

  • UNE 80602:2011 Determination of biomass fraction in waste tires used as alternative fuel in cement plants
  • UNE 40151-4:1974 GENERAL CONVERSION TABLE TO SUBSTITUTE TRADITIONAL NUMBERS OF YARNS BY ROUND OFF VALUES OF TEX SYSTEM.

European Committee for Standardization (CEN), voc multiple replacement

  • EN ISO 3908:2009 Hardmetals - Determination of insoluble (free) carbon - Gravimetric method
  • EN 952:1999 Door leaves - General and local flatness - Measurement method
  • EN ISO 17075:2007 Leather - Chemical tests - Determination of chromium(VI) content [Superseded: CEN CEN/TS 14495]
  • EN ISO 287:2009 Paper and board - Determination of moisture content of a lot - Oven-drying method (ISO 287:2009)
  • EN ISO 7726:2001 Ergonomics of the Thermal Environment - Instruments for Measuring Physical Quantities ISO 7726:1998; Supersedes EN 27726:1993
  • EN ISO 10012:2003 Measurement management systems Requirements for measurement processes and measuring equipment ISO 10012:2003; Supersedes EN 30012-1:1993
  • EN 306:1997 Heat exchangers - Methods of measuring the parameters necessary for establishing the performance
  • EN ISO 10545-2:1997 Ceramic Tiles - Part 2: Determination of Dimensions and Surface Quality Supersedes EN 98: 1991
  • EN ISO 15002:2008 Flow-metering devices for connection to terminal units of medical gas pipeline systems [Superseded: CEN EN 13220]
  • EN ISO 13790:2008 Energy performance of buildings - Calculation of energy use for space heating and cooling (ISO 13790:2008)
  • EN 951:1998 Door leaves - Method for measurement of height, width, thickness and squareness
  • EN 12836:2002 Surface active agents - Determination of the water number of alkoxylated products
  • EN ISO 638:2008 Paper, board and pulps - Determination of dry matter content - Oven-drying method (ISO 638:2008)
  • EN ISO 9004:2000 Quality management systems - Guidelines for performance improvements Supersedes EN ISO 9004-1: 1994; ISO 9004: 2000
  • EN 1402-6:2003 Unshaped refractory products Part 6: Measurement of physical properties Supersedes ENV 1402-6: 1998
  • EN ISO 17852:2008 Water quality - Determination of mercury - Method using atomic fluorescence spectrometry (ISO 17852:2006)
  • EN ISO 20869:2010 Footwear - Test methods for outsoles, insoles, lining and insocks - Water soluble content (ISO 20869:2010)
  • EN 1264-3:2009 Water based surface embedded heating and cooling systems - Part 3: Dimensioning
  • EN ISO 10280:1995 Steel and Iron - Determination of Titanium Content - Diantipyrylmethane Spectrophotometric Method (ISO 10280 : 1991)
  • EN 14594:2005 Respiratory protective devices - Continuous flow compressed air line breathing apparatus - Requirements, testing, marking
  • EN ISO 10058-1:2008 Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) - Part 1: Apparatus, reagents, dissolution and determination of gravimetric silica (ISO 10058-1:2008)
  • EN ISO 11137-3:2006 Sterilization of health care products - Radiation - Part 3: Guidance on dosimetric aspects
  • EN ISO 3382-1:2009 Acoustics - Measurement of room acoustic parameters - Part 1: Performance spaces (ISO 3382-1:2009)
  • EN ISO 10545-10:1997 Ceramic Tiles - Part 10: Determination of Moisture Expansion Supersedes EN 155: 1991; ISO 10545-10: 1995
  • EN ISO 14896:2001 Plastics - Polyurethane raw materials - Determination of isocyanate content ISO 14896: 2000; Supersedes EN ISO 9369: 1997
  • EN ISO 2922:2001 Acoustics - Measurement of Airborne Sound Emitted by Vessels on Inland Waterways and Harbours Supersedes EN 22922:1993; ISO 2922:2000
  • EN 9133:2004 Aerospace series - Quality management systems - Qualification procedure for aerospace standard parts
  • EN ISO 3834-2:2005 Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements (ISO 3834-2:2005)
  • EN ISO 3834-4:2005 Quality requirements for fusion welding of metallic materials - Part 4: Elementary quality requirements (ISO 3834-4:2005)

ES-UNE, voc multiple replacement

  • UNE-EN ISO 8655-7:2022 Piston-operated volumetric apparatus - Part 7: Alternative measurement procedures for the determination of volume (ISO 8655-7:2022, Corrected version 2023-01)

Defense Logistics Agency, voc multiple replacement

U.S. Military Regulations and Norms, voc multiple replacement

European Committee for Electrotechnical Standardization（CENELEC）, voc multiple replacement

  • EN 60580:2000 Medical Electrical Equipment Dose Area Product Meters
  • EN 62053-22:2003 Electricity metering equipment (a.c.) Particular requirements Part 22: Static meters for active energy (classes 0,2 S and 0,5 S)
  • EN 62053-52:2005 Electricity metering equipment (AC) - Particular requirements Part 52: Symbols
  • EN 62634:2011 Radio data system (RDS) - Receiver products and characteristics - Methods of measurement (Remains Current)
  • EN 60255-26:2009 Measuring relays and protection equipment - Part 26: Electromagnetic compatibility requirements (Incorporating corrigendum October 2013)
  • EN 60793-1-22:2002 Optical Fibres Part 1-22: Measurement Methods and Test Procedures - Length Measurement

Acoustical Society of America (ASA), voc multiple replacement

  • ASA S2.70-2006 AMERICAN NATIONAL STANDARD Guide for the Measurement and Evaluation of Human Exposure to Vibration Transmitted to the Hand

Association of German Mechanical Engineers, voc multiple replacement

  • VDI 4280 Blatt 4-2009 Planning of ambient air quality measurements - Substitution of missing values in series of measured values of ambient air quality

British Standards Institution (BSI), voc multiple replacement

  • BS EN ISO 8655-7:2022 Tracked Changes. Piston-operated volumetric apparatus. Alternative measurement procedures for the determination of volume
  • PD ISO/TR 16689:2012 Anodizing of aluminium and its alloys. Experimental research on possible alternative sealing quality test methods to replace the phosphoric acid/chromic acid immersion test. Evaluation of correlations
  • BS EN ISO 10280:1991 Steel and iron - Determination of titanium content - Diantipyrylmethane spectrophotometric method
  • BS ISO 8196-3:2022 Tracked Changes. Milk. Definition and evaluation of the overall accuracy of alternative methods of milk analysis. Protocol for the evaluation and validation of alternative quantitative methods of milk analysis
  • BS ISO 19030-3:2016 Ships and marine technology. Measurement of changes in hull and propeller performance. Alternative methods
  • PD ISO/TS 19850:2022 Fire tests. Use of LED (light-emitting diode) as an alternative to white light for measuring smoke parameters
  • 20/30411208 DC BS ISO 8196-3. Milk. Definition and evaluation of the overall accuracy of alternative methods of milk analysis. Part 3. Protocol for the evaluation and validation of alternative quantitative methods of milk analysis
  • 20/30375680 DC BS EN ISO 8655-7. Piston-operated volumetric apparatus. Part 7. Alternative measurement procedures for the determination of volume
  • BS ISO 5725-5:1998 Accuracy (trueness and precision) of measurement methods and results - Alternative methods for the determination of the precision of a standard measurement method

International Organization for Standardization (ISO), voc multiple replacement

  • ISO 8196-3:2022 Milk — Definition and evaluation of the overall accuracy of alternative methods of milk analysis — Part 3: Protocol for the evaluation and validation of alternative quantitative methods of milk analys
  • ISO 8655-7:2022 Piston-operated volumetric apparatus — Part 7: Alternative measurement procedures for the determination of volume
  • ISO/TS 19850:2022 Fire tests — Use of LED (light-emitting diode) as an alternative to white light for measuring smoke parameters
  • ISO 8655-7:2022/CD Amd 1:2011 Piston-operated volumetric apparatus — Part 7: Alternative measurement procedures for the determination of volume — Amendment 1
  • ISO 8196-3:2022 | IDF 128-3 Milk — Definition and evaluation of the overall accuracy of alternative methods of milk analysis — Part 3: Protocol for the evaluation and validation of alternative quantitative methods of milk analysis
  • ISO 8196-3:2009 | IDF 128-3:2009 Milk — Definition and evaluation of the overall accuracy of alternative methods of milk analysis — Part 3: Protocol for the evaluation and validation of alternative quantitative methods of milk analysis
  • ISO 8196-3:2022 | IDF 128-3:2022 Milk — Definition and evaluation of the overall accuracy of alternative methods of milk analysis — Part 3: Protocol for the evaluation and validation of alternative quantitative methods of milk analysis
  • ISO 10280:1991 Steel and iron; determination of titanium content; diantipyrylmethane spectrophotometric method
  • ISO 7723:1984 Manganese ores and concentrates; Determination of titanium content; 4,4'-Diantipyrylmethane spectrometric method
  • ISO 19030-3:2016 Ships and marine technology - Measurement of changes in hull and propeller performance - Part 3: Alternative methods
  • ISO 6358-2:2019 Pneumatic fluid power — Determination of flow-rate characteristics of components using compressible fluids — Part 2: Alternative test methods

Korean Agency for Technology and Standards (KATS), voc multiple replacement

  • KS D ISO 10280:2002 Steel and iron-Determination of titanium content-Diantipyrylmethane spectrophotometric method
  • KS D ISO 6827:2001 Aluminium and aluminium alloys－Determination of titanium content －Diantipyrylmethane photometric method
  • KS E ISO 4691:2010 Iron ores－Determination of titanium－Diantipyrylmethane spectrophotometric method
  • KS M ISO 900:2003 Aluminium oxide primarily used for the production of aluminium-Determination of titanium content-Diantipyrylmethane photometric method
  • KS E ISO 6995:2001 Aluminium ores－Determination of titanium content－4, 4′- Diantipyrylmethane spectrophotometric method
  • KS M ISO 900:2013 Aluminium oxide primarily used for the production of aluminium－Determination of titanium content－Diantipyrylmethane photometric method

American Society for Testing and Materials (ASTM), voc multiple replacement

  • ASTM D4795-94(1998) Standard Test Method for Nitrogen Content of Soluble Nitrocellulose-Alternative Method
  • ASTM G220-20 Standard Practice for Replacing Saturated Calomel Reference Electrode (SCE) for Measuring Electrode Potentials
  • ASTM D6111-97 Standard Test Method for Bulk Density and Specific Gravity of Plastic Lumber and Shapes by Displacement

中华人民共和国国家卫生和计划生育委员会, voc multiple replacement

  • GBZ/T 301-2017 Estimation method of eye lens dose caused by ionizing radiation (replaces WS/T 117-1999)

NZ-SNZ, voc multiple replacement

  • AS/NZS 4052:1992 Guidance on the Use of the Substitution Method for Measurements of Radiation from Microwave Ovens for Frequencies Above 1 GHz

ZA-SANS, voc multiple replacement

  • SANS 219:2005 Guidance on the use of the substitution method for measurements of radiation from microwave ovens for frequencies above 1 GHz

VN-TCVN, voc multiple replacement

  • TCVN 7187-2002 Guidance on the use of the substitution method for measurements of radiation from microwave ovens for frequencies above 1 GHz

RO-ASRO, voc multiple replacement

  • STAS 1784-1987 Protection equipment LEATHEH AND LEATHER SUBSTITUTE APRONS General technical requirements for quality

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, voc multiple replacement

  • GB/T 1826-1979 Determination of bismuth content in tin concentrates--Dithiodiantipyryl methane photometric method
  • GB/T 4373.4-1984 Methods for chemical analysis of arsenic--The dithio-diantipyrylmethane photometric method for the determination of bismuth content
  • GB 6730.48-1986 Method for chemical analysis of iron ore-Dithiodiantipyridine methane spectrophotometric method for determination of bismuth content
  • GB/T 6730.48-1986 Methods for chemical analysis of iron ores--The dethio diantipyryl methane photometric method for the determination of bismuth content

国家市场监督管理总局、中国国家标准化管理委员会, voc multiple replacement

  • GB/T 6730.48-2021 Iron ores—Determination of bismuth content— Dithiodiantipyryl methane spectrophotometric method
  • GB/T 40523.3-2021 Ships and marine technology—Measurement of changes in hull and propeller performance—Part 3: Alternative methods

Taiwan Provincial Standard of the People's Republic of China, voc multiple replacement

  • CNS 8442-1982 Method for Determination of Titanium Oxide in Feldspar (Diantipyrylmenthane Absorptiometric Method)

(U.S.) Telecommunications Industries Association , voc multiple replacement

  • TIA/EIA-455-171A-2001 FOTP-171 Attenuation by Substitution Measurement for Short-Length Multimode Graded-Index and Single Mode Optical Fiber Cable Assemblies

American National Standards Institute （ANSI), voc multiple replacement

  • ANSI/TIA/EIA 455-171-A-2001 Attenuation by Substitution Measurement for Short-Length Multimode Graded-Index and Single Mode Optical Fiber Cable Assemblies

SE-SIS, voc multiple replacement

  • SIS SS 3602-1988 Road vehicles - Brake linings - Test procedures for substitute linings for vehicles with a total weight over 3,5 tonnes

American Society of Mechanical Engineers (ASME), voc multiple replacement

  • ASME 2303-2001 Alternative Quality Control Test Frequency, Class I Fiber Reinforced Plastic Pressure Vessels Section X

Canadian Standards Association (CSA), voc multiple replacement

Jiangsu Provincial Standard of the People's Republic of China, voc multiple replacement

  • DB32/T 4226-2022 Safety management and quality control specifications for clinical use of continuous renal replacement therapy devices

Professional Standard - Non-ferrous Metal, voc multiple replacement

  • YS/T 519.4-2006 Method for chemical analysis of arsenic-Dithiobisantipyrine-based methane spectrophotometric method for determination of bismuth content

IX-CISPR, voc multiple replacement

  • CISPR 19-1983 Guidance on the use of the substitution method for measurements of radiation from microwave ovens for frequencies above 1 GHz

YU-JUS, voc multiple replacement

  • JUS B.G8.515-1989 Aluminium ores. Deterainat ion of titanium content. 4,4 -Diantipyrylmethane spec-trophotometric method

IN-BIS, voc multiple replacement

  • IS 13671-1993 Guidance on the use of the substitution method kfor measurements of radiation from microwave ovens for frequencies above 1 GHz

TIA - Telecommunications Industry Association, voc multiple replacement

  • EIA-455-66-1984 FOTP-66 Test Method for Measuring Relative Abrasion Resistance of Optical Waveguide Coating and Buffers (No replacement)

BE-NBN, voc multiple replacement

  • NBN T 52-725-1990 Petroleum products - Organic oxygen compounds used as substitution fuels in petrol (gasoline) - Permitted compounds and contents

ESD - ESD ASSOCIATION, voc multiple replacement

  • TR3.0-01-2002 Alternate Techniques for Measuring Ionizer Offset Voltage and Discharge Time (Formerly TR13-02)

  Multiple substitution, Double the amount of voc, Double the amount of substitution, Multiple substitution, voc multiple replacement, Double the amount to replace voc, Replacement of active duty original multiple.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved