ZH
RU
ES
Sample peak area
Sample peak area, Total:77 items.
In the international standard classification, Sample peak area involves: Lubricants, industrial oils and related products, Leather technology, Products of the textile industry, Analytical chemistry, Products of the chemical industry, Raw materials for rubber and plastics, Plastics, Glass, Protection against dangerous goods, Paints and varnishes, Road engineering, Waxes, bituminous materials and other petroleum products, Rubber and plastics products, Paper and board.
American Society for Testing and Materials (ASTM), Sample peak area
- ASTM D7214-07 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
- ASTM D7214-07a(2012) Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
- ASTM D7214-07a Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
- ASTM D7214-06 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
- ASTM D2347-00 Standard Test Method for Measuring Area of Leather Test Specimens
- ASTM D2347-00(2005) Standard Test Method for Measuring Area of Leather Test Specimens
- ASTM D7214-07a(2019) Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
- ASTM D7214-20 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
- ASTM D2347-00(2021) Standard Test Method for Measuring Area of Leather Test Specimens
- ASTM D2347-00(2010) Standard Test Method for Measuring Area of Leather Test Specimens
- ASTM D2347-00(2015) Standard Test Method for Measuring Area of Leather Test Specimens
- ASTM D7214-23 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
- ASTM D7214-22 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
- ASTM E2458-10 Standard Practices for Bulk Sample Collection and Swab Sample Collection of Visible Powders Suspected of Being Biological Agents from Nonporous Surfaces
- ASTM D2726-10 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
- ASTM E1217-11 Standard Practice for Determination of the Specimen Area Contributing to the Detected Signal in Auger Electron Spectrometers and Some X-Ray Photoelectron Spectrometers
- ASTM E1217-00 Standard Practice for Determination of the Specimen Area Contributing to the Detected Signal in Auger Electron Spectrometers and Some X-Ray Photoelectron Spectrometers
- ASTM E1217-05 Standard Practice for Determination of the Specimen Area Contributing to the Detected Signal in Auger Electron Spectrometers and Some X-Ray Photoelectron Spectrometers
- ASTM D7229-08(2013)e1 Standard Test Method for Preparation and Determination of the Bulk Specific Gravity of Dense-Graded Cold Mix Asphalt (CMA) Specimens by Means of the Superpave Gyratory Compactor
- ASTM D722-93(2007) Standard Test Method for Grease Resistance of Paper
CZ-CSN, Sample peak area
TR-TSE, Sample peak area
- TS 3496-1980 DETERMINATION OF SPECIFIC SURFACE AREA OF POWDERED ORE SAMPLES
German Institute for Standardization, Sample peak area
- DIN EN 12127:1997 Textiles - Fabrics - Determination of mass per unit area using small samples; German version EN 12127:1997
- DIN EN 12127:1997-12 Textiles - Fabrics - Determination of mass per unit area using small samples; German version EN 12127:1997
- DIN EN ISO 4519:2016 Electrodeposited metallic coatings and related finishes - Sampling procedures for inspection by attributes (ISO 4519:1980)
- DIN EN 1288-2:2000 Glass in building - Determination of the bending strength of glass - Part 2: Coaxial double ring test on flat specimens with large test surface areas; German version EN 1288-2:2000
- DIN EN 1288-5:2000 Glass in building - Determination of the bending strength of glass - Part 5: Coaxial double ring test on flat specimens with small test surface areas; German version EN 1288-5:2000
- DIN EN 1288-2:2000-09 Glass in building - Determination of the bending strength of glass - Part 2: Coaxial double ring test on flat specimens with large test surface areas; German version EN 1288-2:2000 / Note: To be replaced by DIN EN ISO 1288-2 (2007-10).
- DIN EN 1288-5:2000-09 Glass in building - Determination of the bending strength of glass - Part 5: Coaxial double ring test on flat specimens with small test surface areas; German version EN 1288-5:2000 / Note: To be replaced by DIN EN ISO 1288-5 (2007-10).
IN-BIS, Sample peak area
AENOR, Sample peak area
- UNE-EN 12127:1998 TEXTILES. FABRICS. DETERMINATION OF MASS PER UNIT AREA USING SMALL SAMPLES.
- UNE-EN 1288-5:2000 Glass in building - Determination of the bending strength of glass - Part 5: Coaxial double ring test on flat specimens with small test surface areas.
- UNE-EN 1288-2:2000 Glass in building - Determination of bending strength of glass - Part 2: Coaxial double ring test on flat specimens with large test surface areas.
Association Francaise de Normalisation, Sample peak area
- NF G07-170*NF EN 12127:1998 Textiles. Fabrics. Determination of mass per unit area using small samples.
- NF A91-155*NF EN ISO 4519:2016 Electrodeposited metallic coatings and related finishes - Sampling procedures for inspection by attributes
- NF EN 16150:2012 Qualité de l'eau - Lignes directrices pour l'échantillonnage des macroinvertébrés benthiques en cours d'eau peu profonds au prorata des surfaces de recouvrement des habitats présents
- NF P78-345*NF EN 1288-5:2000 Glass in building - Determination of the bending strength of glass - Part 5 : coaxial double ring test on flat specimens with small test surface areas.
- NF P78-342*NF EN 1288-2:2000 Glass in building - Determination fo bending strength of glass - Part 2 : coaxial double ring test on flat specimens with large test surface areas
British Standards Institution (BSI), Sample peak area
- BS EN 12127:1998 Textiles - Fabrics - Determination of mass per unit area using small samples
- BS ISO 19950:2015 Aluminium oxide primarily used for the production of aluminium. Determination of alpha alumina content. Method using X-ray diffraction net peak areas
- BS 5293-12:1996 Sampling and testing carbon black for use in the rubber industry - Methods for determination of surface area by surfactant adsorption
- 14/30288708 DC BS EN ISO 1288-2. Glass in building. Determination of the bending strength of glass. Part 2. Coaxial double-ring test on flat specimens with large test surface areas
European Committee for Standardization (CEN), Sample peak area
- EN 12127:1997 Textiles - Fabrics - Determination of mass per unit area using small samples
- EN 1288-2:2000 Glass in Building - Determination of the Bending Strength of Glass - Part 2: Coaxial Double Ring Test on Flat Specimens with Large Test Surface Areas
- EN 1288-5:2000 Glass in Building - Determination of the Bending Strength of Glass - Part 5: Coaxial Double Ring Test on Flat Specimens with Small Test Surface Areas
Danish Standards Foundation, Sample peak area
- DS/EN 12127:1998 Textiles - Fabrics - Determination of mass per unit area using small samples
- DS/EN 1288-2:2001 Glass in building - Determination of the bending strength of glass - Part 2: Coaxial double ring test on flat specimens with large test surface areas
- DS/EN 1288-5:2001 Glass in building - Determination of the bending strength of glass - Part 5: Coaxial double ring test on flat specimens with small test surface areas
Lithuanian Standards Office , Sample peak area
- LST EN 12127-1999 Textiles - Fabrics - Determination of mass per unit area using small samples
- LST EN 1288-2-2002 Glass in building - Determination of bending strength of glass - Part 2: Coaxial double ring test on flat specimens with large test surface areas
- LST EN 1288-5-2002 Glass in building - Determination of the bending strength of glass - Part 5: Coaxial double ring test on flat specimens with small test surface areas
Korean Agency for Technology and Standards (KATS), Sample peak area
- KS D ISO 19319-2005(2020) Surface chemical analysis－Auger electron spectroscopy and X-ray photoelectron spectroscopy－Determination of lateral resolution, analysis area, and sample area viewed by the analyzer
- KS F 2446-2020 Standard test method for bulk specific gravity and density of compacted bituminous mixtures using saturated surface dry specimens
PT-IPQ, Sample peak area
- NP EN 12127-1999 Textiles Fabrics. Determination of mass per unit área using small samples
International Organization for Standardization (ISO), Sample peak area
- ISO 19950:2015 Aluminium oxide primarily used for the production of aluminium - Determination of alpha alumina content - Method using X-ray diffraction net peak areas
- ISO 4591:1992 Plastics; film and sheeting; determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)
- ISO 1288-2:2016 Glass in building - Determination of the bending strength of glass - Part 2: Coaxial double-ring test on flat specimens with large test surface areas
- ISO 1288-5:2016 Glass in building - Determination of the bending strength of glass - Part 5: Coaxial double ring test on flat specimens with small test surface areas
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Sample peak area
- GB/T 29556-2013 Surface chemical analysis.Auger electron spectroscopy and X-ray photoelectron spectroscopy.Determination of lateral resolution,analysis area,and sample area viewed by the analyser
- GB/T 20220-2006 Plastic.Film and sheeting.Determination of average thickness of a sample,and average thickness and yield of a roll,by gravimetric techniques (gravimetric thickness)
Group Standards of the People's Republic of China, Sample peak area
- T/JCMS 0007-2022 Determination of the ultimate aerobic biodegradability of polylactic acid biodegradable materials under controlled composting conditions —Method by calculating the peak area of terahertz wide spectrum
AASHTO - American Association of State Highway and Transportation Officials, Sample peak area
- T 166-2005 Standard Method of Test for Bulk Specific Gravity of Compacted Hot-Mix Asphalt Using Saturated Surface-Dry Specimens
- T 166-2013 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
- T 166-2011 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
- T 166-2010 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
- T 166-2012 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
- T 166-2007 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
- T 166-1993 Standard Specification for Bulk Specific Gravity of Compacted Bituminous Mixtures Using Saturated Surface-Dry Specimens (Eighteenth Edition)
- T 166-2000 Standard Method of Test for Bulk Specific Gravity of Compacted Bituminous Mixtures Using Saturated Surface-Dry Specimens (Twentieth Edition)
The American Road & Transportation Builders Association, Sample peak area
- AASHTO T 166-2010 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
- AASHTO T 166-2012 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
- AASHTO T 166-2013 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
- AASHTO T 166-2016 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
- AASHTO T 166-2021 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Saturated Surface-Dry Specimens
- AASHTO T166-2000 Standard Method of Test for Bulk Specific Gravity of Compacted Bituminous Mixtures Using Saturated Surface-Dry Specimens Twentieth Edition R(1998)
未注明发布机构, Sample peak area
- JIS R 3111-5:2023 Glass in building -- Determination of the bending strength of glass -- Part 5: Coaxial double ring test on flat specimens with small test surface areas
ZA-SANS, Sample peak area
- SANS 4591:2003 Plastics - Film and sheeting - Determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)