ZH
RU
ES
Dali Resin Glue
Dali Resin Glue, Total:474 items.
In the international standard classification, Dali Resin Glue involves: Products of the chemical industry, Cutting tools, Rubber and plastics products, Paints and varnishes, Paint ingredients, Plastics, Rubber, Insulation, Adhesives, Interior finishing, Dentistry, Information sciences. Publishing, Materials for aerospace construction, Refractories, Road vehicle systems, Wood-based panels, Photography, Insulating materials, Medical equipment, Textile fibres, Organic chemicals, Construction materials, Footwear, Labour. Employment, Reinforced plastics, Pipeline components and pipelines, Surface treatment and coating, Electrical wires and cables, Farming and forestry, Iron and steel products, Power stations in general, Railway rolling stock, Pharmaceutics, Materials and components for railway engineering, Non-textile floor coverings, Insulating fluids, Valves, Paper and board, Wind turbine systems and other alternative sources of energy.
Canadian Standards Association (CSA), Dali Resin Glue
VN-TCVN, Dali Resin Glue
TR-TSE, Dali Resin Glue
- TS 1048-1972 CRUDE G?M (OLEORESIN)
- TS 93-1964 SYNTHETIC RES?N GLUE USED ?N WOOD INDUSTRY
- TS 3237-1978 PLASTICS - UNSATURATED POLYESTER RESINS - MEASUREMENT OF GEL TIME AT 25 °C
General Motors Corporation (GM), Dali Resin Glue
- GM 9985985-1994 Adhesive, Two-Part, Epoxy, Resin
- GM 9986091-1998 Adhesive, Two-Part, Epoxy Resin Revision A
- GM 9986131-1996 Adhesive, Two-Part, Urethane, Resin
- GM 9985951-1993 Adhesive, Two-Part, Acrylic, Resin
- GM 9985954-1994 Adhesive, Two-Part, Acrylic, Resin
- GM 9985986-1994 Adhesive, Two-Part, Epoxy, Hardener
- GM 9986092-1995 Adhesive, Two-Part, Epoxy, Hardener
- GM 9986073-1996 Adhesive, Two-Part, Urethane, Resin
- GM 9986090-1998 Adhesive, Induction Cure, Two-Part, Epoxy, Mixture Revision A
- GM 9985984-1994 Adhesive, Two-Part, Epoxy, UV Set, Room Temperature Cure
Standard Association of Australia (SAA), Dali Resin Glue
- AS 2249:1999 Australian sandarac resin
- AS/NZS 3750.1:2008 Paints for steel structures - Epoxy mastic (two-pack) - For rusted steel
- AS/NZS 4585.2:1999 Low styrene emission resins - The assessment of degree of interlaminar adhesion in unsaturated polyester and vinyl ester resin - Glass fibre laminates
- AS 3750.1:1994 Paints for steel structures Part 1: Epoxy mastic ( two- pack) - For rusted steel
Japanese Industrial Standards Committee (JISC), Dali Resin Glue
Korean Agency for Technology and Standards (KATS), Dali Resin Glue
- KS L 6505-2020 Resinoid offset grinding wheels
- KS L 6505-1986 Resinoid offset grinding wheels
- KS M 6010-2014 Synthetic resin emulsion paints
- KS M 3701-2007 Urea resin adhesives for wood
- KS M ISO 9396-2010(2020) Plastics-Phenolic resins-Determination of the gel time of resols under specific conditions using automatic apparatus
- KS M ISO 9396:2010 Plastics-Phenolic resins-Determination of the gel time of resols under specific conditions using automatic apparatus
- KS M ISO 6907-2008(2013) Rubber footwear-Vulcanized resin rubber and vulcanized high-hardness rubber soling materials-Specification
- KS M ISO 6907:2008 Rubber footwear-Vulcanized resin rubber and vulcanized high-hardness rubber soling materials-Specification
- KS D ISO 14655-2002(2012) Epoxy?coated strand for the prestressing of concrete
- KS M ISO 2535:2010 Plastics-Unsaturated-polyester resins-Measurement of gel time at ambient temperature
- KS M ISO 2535-2010(2020) Plastics-Unsaturated-polyester resins-Measurement of gel time at ambient temperature
- KS F 2480-2009 Method of test for splitting tensile strength of polyester resin concrete
- KS D ISO 14655:2002 Epoxy#8722;coated strand for the prestressing of concrete
- KS M 3375-2010 Plastics piping systems for non-pressure drainage and sewerage-Polyester resin concrete(PRC) pipes
- KS M 7122-2018 Test method for sizing of paper and paperboard(Hercules method)
- KS M 7122-1988 Test method for sizing of paper and paperboard(Hercules method)
- KS M 7122-2002 Test method for sizing of paper and paperboard(Hercules method)
- KS M ISO 2114:2010 Plastics(polyester resins) and paints and varnishes(binders)-Determination of partial acid value and total acid value
轻工业部, Dali Resin Glue
U.S. Military Regulations and Norms, Dali Resin Glue
- ARMY A-A-50272-1997 ADHESIVES, EPOXY
- ARMY MIL-C-43157 (4)-1990 CLOTH, SPUN VISCOSE RAYON, RESIN IMPREGNATED
- ARMY MIL-C-43157-1963 CLOTH, SPUN VISCOSE RAYON, RESIN IMPREGNATED
- ARMY MIL-B-48612 A NOTICE 1-1997 BONDING WITH EPOZY-ELASTOMERIC ADHESIVE SYSTEM, GLASS TO METAL
- ARMY MIL-B-48612 A-1987 BONDING WITH EPOZY-ELASTOMERIC ADHESIVE SYSTEM, GLASS TO METAL
- ARMY MIL-A-52194 A REINST NOTICE 3-1997 ADHESIVE, EPOXY (FOR BONDING GLASS REINFORCED POLYESTER)
- ARMY MIL-A-52194 A VALID NOTICE 1-1989 ADHESIVE, EPOXY (FOR BONDING GLASS REINFORCED POLYESTER)
- ARMY MIL-A-52194 A-1967 ADHESIVE, EPOXY (FOR BONDING GLASS REINFORCED POLYESTER)
- ARMY MIL-P-25421 B NOTICE 2-2002 PLASTIC MATERIALS, GLASS FIBER-EPOXY RESIN, LOW PRESSURE LAMINATED
- ARMY MIL-P-25421 B VALID NOTICE 1-1991 PLASTIC MATERIALS, GLASS FIBER-EPOXY RESIN, LOW PRESSURE LAMINATED
- ARMY MIL-P-25421 B-1971 PLASTIC MATERIALS, GLASS FIBER-EPOXY RESIN, LOW PRESSURE LAMINATED
- ARMY A-A-59134 VALID NOTICE 2-2009 Insulating Compound, Electrical, Epoxy, Colloidal Silica Filled for Potting and Encapsulation
ES-AENOR, Dali Resin Glue
- UNE 48 157
- UNE 21-340 Pt.3-11-1993 Specification for solventless polymerisable resinous compounds used for electrical insulation. Part 3: Specifications for individual materials. Sheet 11: Epoxy resinbased coating powders
IN-BIS, Dali Resin Glue
CZ-CSN, Dali Resin Glue
- CSN 66 8629-1979 Glues. flodified urea-for- maldehyde resins.
- CSN 64 0344-1979 Plastics. TJnsaturated poly- ster resins. Measureinrut f gel fime at 25 "C.
- CSN 65 6252-1973 Determination of resins from lubrkating cils by chromatography with silíca gel
- CSN 21 0707-1963 Safety code for hydraulic presses íormoulding thermosetting resins(thermosets)
(U.S.) Ford Automotive Standards, Dali Resin Glue
- FORD ESK-M2G298-A1-1995 ADHESIVE, SILICONE, TWO COMPONENT
- FORD M3D115-A-1989 EPOXY - SURFACE OR GEL COAT
- FORD ESE-M8G164-A-1983 GASKET, CELLULOSE/ SYNTHETIC RUBBER AND RESIN
- FORD ESA-M8G159-B-1983 GASKET, STEEL/NITRILE BUTADIENE RUBBER, PHENOLIC RESIN& ADHESIVE COATED
- FORD ESH-M2G271-A-1988 ADHESIVE, EPOXY - ONE COMPONENT - POURABLE
- FORD ESA-M8G159-A-1983 GASKET, STEEL/NITRILE BUTADIENE RUBBER& PHENOLIC RESIN COATED
- FORD WSF-M99G165-A-1992 ENCAPSULANT, SILICONE GEL, ONE COMPONENT PLATINUM CURE
- FORD ESF-M2G331-A-1995 ADHESIVE, EPOXY - ONE COMPONENT - HEAT CURING - STRUCTURAL
- FORD WSB-M2G372-A-1995 ADHESIVE, EXTRUDABLE EPOXY BASED, THUMB GRADE FORM, STRUCTURAL
- FORD ESK-M2G298-A2-1995 ADHESIVE, SILICONE, TWO COMPONENT (Shown on ESK-M2G298-A1)
- FORD ESF-M3L75-A-2003 EPOXY RESIN, POTTING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSF-M3L77-B-2003 EPOXY RESIN, POTTING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M3L77-B2-2003 EPOXY RESIN, POTTING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESE-M8G164-A-2012 GASKET, CELLULOSE/SYNTHETIC RUBBER AND RESIN ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESP-M8G199-A1-1990 GASKET, CORK - ETHYLENE ACRYLIC BINDER - LARGE GRANULE
- FORD ESB-M11P18-A-2007 ADHESION REQUIREMENTS, SPONGE RUBBER BONDED TO VINYL ***To Be Used With Ford WSS-M991111-A***
- FORD WSF-M2G366-A-2003 ADHESIVE, EPOXY, ELECTRICALLY CONDUCTIVE ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESA-M2G200-A-2003 ADHESIVE, EPOXY - MICROENCAPSULATED ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M99G128-B1-2006 ENCAPSULANT, SILICONE DIELECTRIC GEL **TO BE USED WITH FORD WSS-M99P1111-A**
- FORD ESK-M2G287-A1-1994 ADHESIVE, EPOXY - HEAT CURING, EXCEPTION IN SOLIDS (PARA 3.1.3): MIN. 97,0 %
- FORD WSB-M4G108-B-1994 SEALER, PRESSURE SENSITIVE, RUBBER/RESIN/ ASPHALT, TWINE REINFORCED
- FORD ESA-M2G221-A-2003 ADHESIVE - POLYESTER, EPOXY MODIFIED ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESF-M2G156-A2-2003 ADHESIVE, EPOXY, ONE PART, THIXOTROPIC ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSK-M2D478-A-2009 SILICONE (MQ) RUBBER, ROTATING SHAFT OIL SEAL ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESA-M8G159-B-2012 GASKET, STEEL/NITRILE BUTADIENE RUBBER, PHENOLIC RESIN AND ADHESIVE COATED ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESB-M2G347-A-1990 ADHESIVE, EPOXY HYBRID - TWO COMPONENT ROOM TEMPERATURE CURE OR INDUCTION CURING, STRUCTURAL
- FORD ESE-M99J252-A-2005 COATING, BLACK RUBBER RESIN BASE, BAKE OR AIR DRY ***TO BE USED WITH FORD WSS-M99P1111-A***
Professional Standard - Chemical Industry, Dali Resin Glue
- HG/T 4346-2012 Chlorinated rubber resin for coatings
- HG/T 4399-2012 Novolak resins used for offset plates
- HG/T 3320-1987 Water-soluble phenolic resin adhesive for coated abrasive tools
- HG/T 2165-1991 D301 macroporous weakly basic styrene-based anion exchange resin
- HG/T 2164-1991 D113 macroporous weakly acidic acrylic cation exchange resin
- HG/T 2754-1996 D202 Macroporous Strong Base Type II Styrenic Anion Exchange Resin
- HG/T 2624-1994 D301-FC macroporous weakly basic styrene anion exchange resin
- HG/T 2756-1996 Determination of Gel Time of Phenolic Resin at a Given Temperature Using an Automatic Measuring Apparatus
Group Standards of the People's Republic of China, Dali Resin Glue
- T/ZZB 1118-2019 Chlorinated rubber resin by water phase method
- T/ZZB 1454-2019 C5 petroleum resin for adhesives
- T/FSI 054-2020 Methyl MQ Silicone Resin for Pressure Sensitive Adhesives
- T/ACRI 0026-2020 Liquid phenolic resin for continuous casting of three major parts
- T/CSTM 00616.1-2023 Macroporous adsorption resin— Part:1 General requirements
- T/ZZB 1985-2020 Vacuum pressure impregnation (VPI)resin for wind-power generator
- T/JSQA 105-2021 Ethylene-vinyl acetate resin for photovoltaic film
- T/JCMS 0001-2019 Carbon fiber reinforced resin-based pultruded sheet for wind turbine blade girder
- T/HZBX 063-2023 Technical specification for preparing plant type herbal Chinese medicine decoction pieces specimens using epoxy resin AB adhesive
- T/CEEIA 253-2016 Technical Requirements for Solvent-Free Impregnating Resin of Insulating Treatment of Wind Turbine Generator
Professional Standard - Military and Civilian Products, Dali Resin Glue
- WJ 1856-1989 SG-6 colored casting resin glue
- WJ 2189-1994 Specification for fir resin glue for optical instruments
- WJ 1171-1994 Specification for GHJ-1 epoxy resin glue for optical instruments
Professional Standard - Machinery, Dali Resin Glue
- JB/T 6353-1992 Resin and Rubber Sheet Grinding Wheels
- JB/T 6353-2015 Bonded abrasive products.Resinoid and rubber bond flat grinding wheel
- JB/T 6353-2006 Bonded abrasive products Resinoid and rubber bond flat grinding wheel
工业和信息化部, Dali Resin Glue
Indonesia Standards, Dali Resin Glue
RO-ASRO, Dali Resin Glue
Military Standards (MIL-STD), Dali Resin Glue
Taiwan Provincial Standard of the People's Republic of China, Dali Resin Glue
NO-SN, Dali Resin Glue
Society of Automotive Engineers (SAE), Dali Resin Glue
- SAE AMS3867B-2001 Boron Filament Tape, Epoxy-Resin-Impregnated
- SAE AMS3867A-1984 BORON FILAMENT TAPE, EPOXY-RESIN-IMPREGNATED
- SAE AMS3867-1978 BORON FILAMENT TAPE Epoxy Resin Impregnated
- SAE AMS3692A-1986 ADHESIVE COMPOUND, EPOXY High Temperature Application
- SAE AMS3692B-1993 ADHESIVE COMPOUND, EPOXY High Temperature Application
- SAE AMS3692-1960 ADHESIVE COMPOUND, EPOXY High Temperature Application
- SAE AMS3690B-2000 Adhesive Compound, Epoxy Room Temperature Curing
- SAE AMS3690-1960 ADHESIVE COMPOUND, EPOXY Room Temperature Curing
- SAE AMS3692C-2022 Adhesive Compound, Epoxy Resin High Temperature Application
- SAE AMS3704A-1993 Adhesive, Contact Polychloroprene (CR) Rubber, Resin Modified
- SAE AMS3681C-1995 Adhesive, Electrically Conductive Silver-Filled Epoxy Resin
- SAE AMS3306B-1998 Rubber, Silicone 1200 psi (8.27 MPa), High Modulus 55 - 65
- SAE AMS3306C-2014 Rubber, Silicone 1200 psi (8.27 MPa), High Modulus 55 - 65
- SAE AMS3692C-1995 Adhesive Compound, Epoxy Resin High Temperature Application
- SAE AMS3704-1993 ADHESIVE, CONTACT Chloroprene, Resin Modified
- SAE AMS3867/3-1978 BORON FILAMENT TAPE, EPOXY-RESIN-IMPREGNATED Type B8.0 - E375
- SAE AMS3867/1-1978 BORON FILAMENT TAPE, EPOXY-RESIN-IMPREGNATED Type B4.0 - E375
- SAE AMS3867/2-1978 BORON FILAMENT TAPE, EPOXY-RESIN-IMPREGNATED Type B5.6 - E375
- SAE AMS3750-1994 POTTING COMPOUND, EPOXY, FLEXIBLE Durometer 75 - 85
- SAE AMS3239F-2008 Butyl (IIR) Rubber, Phosphate Ester Resistant, 85-95
- SAE AMS3830-1967 Silica ClothBStag Phenolic Resin Impregnated High Pressuremolding
- SAE AMS3735A-1959 POTTING COMPOUND, EPOXY, FILLED 10 - 15 CTE, 225 HDT
- SAE AMS3735B-1982 POTTING COMPOUND, EPOXY, FILLED 10 – 15 CTE, 225 HDT
- SAE AMS3738-1994 POTTING COMPOUND, EPOXY, FILLED 15 – 20 CTE, 180 HDT
- SAE AMS3739-1958 POTTING COMPOUND, EPOXY, FILLED 9 - 12 CTE, 250 HDT
- SAE AMS3738A-1959 POTTING COMPOUND, EPOXY, FILLED 15 – 20 CTE, 180 HDT
- SAE AMS3735-1996 POTTING COMPOUND, EPOXY, FILLED 10 - 15 CTE, 225 HDT
- SAE AMS3686A-1991 Adhesive, Polyimide Resin, Film and Paste High Temperature Resistant, 315 Degrees C (599 Degrees F)
- SAE AMS3695-2022 Adhesive Film, Epoxy-Base for High Durability Structural Adhesive Bonding
- SAE AMS3238F-2008 Butyl (IIR) Rubber, Phosphate Ester Resistant, 65-75
- SAE AMS3690B-1993 Adhesive Compound, Epoxy, Room Temperature Curing
- SAE AMS3867/6A-2001 Boron Filament Tape, Epoxy-Resin-Impregnated Type B8.0-E180 (Type B0.203-E82)
- SAE AMS3867/3B-2001 Boron Filament Tape, Epoxy-Resin-Impregnated Type B8.0-E374 (Type B0.203-E190)
- SAE AMS3867/2B-2001 Boron Filament Tape, Epoxy-Resin-Impregnated Type B5.6-E374 (Type B0.142-E190)
- SAE AMS3867/1A-1984 BORON FILAMENT TAPE, EPOXY-RESIN-IMPREGNATED Type B4.0-E375 (Type B0.100-E190)
- SAE AMS3867/3A-1984 BORON FILAMENT TAPE, EPOXY-RESIN-IMPREGNATED Type B8.0-E375 (Type B0.200-E190)
- SAE AMS3867/4A-2001 Boron Filament Tape, Epoxy-Resin-Impregnated Type B4.0-E180 (Type B0.102-E82)
- SAE AMS3867/6-1984 BORON FILAMENT TAPE, EPOXY-RESIN-IMPREGNATED Type B8.0-E180 (Type B0.200-E82)
- SAE AMS3867/2A-1984 BORON FILAMENT TAPE, EPOXY-RESIN-IMPREGNATED Type B5.6-E375 (Type B0.140-E190)
- SAE AMS3867/4-1984 BORON FILAMENT TAPE, EPOXY-RESIN-IMPREGNATED Type B4.0-E180 (Type B0.100-E82)
- SAE AMS3867/1B-2001 Boron Filament Tape, Epoxy-Resin-Impregnated Type B4.0-E374 (Type B0.102-E191)
- SAE AMS3867/5A-2001 Boron Filament Tape, Epoxy-Resin-Impregnated Type B5.6-E180 (Type B0.142-E82)
- SAE AMS3867/5-1984 BORON FILAMENT TAPE, EPOXY-RESIN-IMPREGNATED Type B5.6-E180 (Type B0.140-E82)
- SAE AMS3731/9-1981 POTTING COMPOUND, EPOXY Flexible, Thermal Shock Resistant, Heat Cure
- SAE AMS3731/9A-1987 POTTING COMPOUND, EPOXY Flexible, Thermal Shock Resistant, Heat Cure
- SAE AMS7267G-2001 Rings, Sealing, Silicone (VSI) Rubber Heat-Resistant, Low Compression Set 70 - 80
- SAE AMS3357G-2003 RUBBER, SILICONE (VMQ) Lubricating Oil and Compression Set Resistant 65 - 75
- SAE AMS3736A-1982 POTTING COMPOUND, EPOXY, FELLED 25 – 30 CTE, 175 HDT Room Temperature Cure
- SAE AMS3740-1994 POTTING COMPOUND, EPOXY, FILLED 15 – 20 GTE, 225 HDT Free Machining
- SAE AMS3740A-1959 POTTING COMPOUND, EPOXY, FILLED 15 - 20 CTE, 225 HDT Free Machining
- SAE AMS3704A-2016 Adhesive, Contact Polychloroprene (CR) Rubber, Resin Modified
- SAE AMS3736-1996 POTTING COMPOUND, EPOXY, FILLED 25 – 30 CTE, 175 HDT Room Temperature Cure
- SAE AMS3737-1996 POTTING COMPOUND, EPOXY, UNFILLED 35 – 40 CTE, 160 HDT Room Temperature Cure
- SAE AMS3737A-1982 POTTING COMPOUND, EPOXY, UNFILLED 35 – 40 CTE, 160 HDT Room Temperature Cure
- SAE AMS3895A-1989 BROADGOODS AND TAPE, MULTI-PLY CARBON FIBER/EPOXY RESIN IMPREGNATED, UNIFORM FIBER
- SAE AMS3695/4-2022 Adhesive Film, Epoxy-Base, High Durability For 215 °C (420 °F) Service
- SAE AMS3695/1-2022 Adhesive Film, Epoxy-Base, High Durability For 95 °C (200 °F) Service
- SAE AMS3695/2-2022 Adhesive Film, Epoxy-Base, High Durability For 120 °C (250 °F) Service
- SAE AMS3695/3-2022 Adhesive Film, Epoxy-Base, High Durability For 175 °C (350 °F) Service
- SAE AMS3895-1980 BROADGOODS AND TAPE, MULTI-PLY GRAPHITE FIBER/EPOXY RESIN IMPREGNATED, UNIFORM FIBER
- SAE AMS3733A-2011 POTTING COMPOUND, EPOXY Two Part, Highly Filled, Heat Cure, High Compressive Strength
- SAE AMS3733-1987 POTTING COMPOUND, EPOXY Two Part, Highly Filled, Heat Cure, High Compressive Strength
- SAE AMS3708-1995 ADHESIVE, EPOXY PASTE, FOR STRUCTURAL WELDBOND For 80°C (180°F) Service
- SAE AMS3708A-1993 ADHESIVE, EPOXY PASTE, FOR STRUCTURAL WELDBOND For 80 °C (180 °F) Service
- SAE AMS3894/17A-1994 Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 200 (1379) Tensile, 18.0 (124) Modulus, 120 (248)
- SAE AMS3906B-1997 Glass Tape and Flat Sheet, Non-Woven Cloth Epoxy Resin Impregnated, For Hand and Machine Layup
SAE - SAE International, Dali Resin Glue
TH-TISI, Dali Resin Glue
- TIS 360-1980 Standard for synthetic resin adhesives (phenolic and aminoplastic)for wood
American National Standards Institute (ANSI), Dali Resin Glue
- ANSI/ASTM D2471:1999 Test Method for Gel Time and Peak Exothermic Temperature of Reacting Thermosetting Resins (08.02)
- ANSI/ASTM D3596:2001 Practice for Determination of Gels (Fisheyes) in General-Purpose Poly(Vinyl Chloride) (PVC) Resins
- ANSI/ASTM D3517:2011 Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
- ANSI/ASTM D2517:2018 Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings
Association Francaise de Normalisation, Dali Resin Glue
- NF S91-211-2:2010 Dentistry - Water-based cements - Part 2 : resin-modified cements.
- NF T57-616*NF ISO 15034:2001 Composites - Prepregs - Determination of resin flow
- NF EN ISO 9396:2001 Plastiques - Résines phénoliques - Détermination du temps de gélification des résols dans des conditions spécifiques sur appareils automatiques
- NF C32-102-3/A1:2006 Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 3 : heat resistant silicone rubber insulated cables.
- NF P61-609:1997 Adhesives for tiles. Determination of shear adhesion strength of reaction resin adhesives.
- NF T77-108:1986 Basic silicones for industrial use. Emulsions. Determination of stability during storing and to centrifugation.
- NF F31-447:1989 Rolling stock. Laminated panels with decorated surface, made of thermosetting resins.
- NF T77-112:1988 Basic silicones for industrial use. Determination of anti-foaming power. Beating method.
- NF F19-223:1992 Railway rolling stock. Epoxy resin paints. Protection system to prevent the corrosion under stress.
- NF T51-512*NF EN ISO 2535:2003 Plastics - Unsaturated polyester resins - Measurement of gel time at ambient temperature.
- NF C26-183-6/A1*NF EN 60893-3-6/A1:2010 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6 : Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins.
- NF T77-153:1987 Basic silicones for industrial use. Determinaion of silicon content (silicon content more than 1 per cent (m/m)). Gravimetric method.
- NF T51-429*NF EN ISO 9396:2001 Plastics - Phenolic resins - Determination of the gel time of resols under specific conditions using automatic apparatus
- NF T77-103:1986 Basic silicones for industrial use. Determination of gel time at a given temperature. Plate method.
- NF T51-429:1995 Plastics. Phenolic resins. Determination of the gel time at a given temperature using automatic apparatus.
British Standards Institution (BSI), Dali Resin Glue
- BS 1000[665]:1979 Universal Decimal Classification - English full edition - Oils - Fats - Waxes - Adhesives - Gums - Resins
- BS EN 2259:1995 Silicone rubber (VMQ) - Hardness 50 IRHD
- BS EN 2260:1995 Silicone rubber (VMQ) - Hardness 60 IRHD
- BS EN 2261:1995 Silicone rubber (VMQ) - Hardness 70 IRHD
- BS 6319-5:1984 Testing of resin and polymer/cement compositions for use in construction - Methods for determination of density of hardened resin compositions
- BS 6319-9:1987 Testing of resin and polymer/cement compositions for use in construction - Method for measurement and classification of peak exotherm temperature
- BS 2782-8 Method 835C:1980 Methods of testing plastics - Other properties - Determination of gelation time of polyester and epoxide resins using a gel timer
- BS 6319-10:1987 Testing of resin and polymer/cement compositions for use in construction - Method for measurement of temperature of deflection under a bending stress
- BS EN ISO 2535:2002 Plastics - Unsaturated polyester resins - Measurement of gel time at ambient temperature
- BS EN 12003:1998 Adhesives for tiles - Determination of shear adhesion strength of reaction resin adhesives
- BS DD 88:1983 Method for the assessment of pot life of non-flowing resin compositions for use in civil engineering
- BS 2782-8 Method 835A:1980 Methods of testing plastics - Other properties - Determination of gelation time of phenolic resins
- BS 6319-1:1983 Testing of resin and polymer/cement compositions for use in construction - Method for preparation of test specimens
- BS 6319-2:1983 Testing of resin and polymer/cement compositions for use in construction - Method for measurement of compressive strength
- BS 6319-8:1984 Testing of resin and polymer/cement compositions for use in construction - Method for the assessment of resistance to liquids
- BS 6319-7:1985 Testing of resin and polymer/cement compositions for use in construction - Method for measurement of tensile strength
- BS EN ISO 9396:2001 Plastics - Phenolic resins - Determination of the gel time at a given temperature using automatic apparatus
- BS EN 60454-3-17:2002 Specifications for pressure-sensitive adhesive tapes for electrical purposes - Specifications for individual materials - Polyester/epoxy combinations with pressure-sensitive adhesive - Polyester/epoxy combinations with pressure sensitive adhesive
- BS 6319-6:1984 Testing of resin and polymer/cement compositions for use in construction - Method for determination of modulus of elasticity in compression
PL-PKN, Dali Resin Glue
HU-MSZT, Dali Resin Glue
The American Road & Transportation Builders Association, Dali Resin Glue
American Society for Testing and Materials (ASTM), Dali Resin Glue
- ASTM D4690-99(2005) Standard Specification for Urea-Formaldehyde Resin Adhesives
- ASTM D4690-99 Standard Specification for Urea-Formaldehyde Resin Adhesives
- ASTM D4690-12 Standard Specification for Urea-Formaldehyde Resin Adhesives
- ASTM D4690-12(2018) Standard Specification for Urea-Formaldehyde Resin Adhesives
- ASTM D2471-99 Standard Test Method for Gel Time and Peak Exothermic Temperature of Reacting Thermosetting Resins
- ASTM F641-98a Standard Specification for Implantable Epoxy Electronic Encapsulants
- ASTM C881-99 Standard Specification for Epoxy-Resin-Base Bonding Systems for Concrete
- ASTM D3596-19 Standard Practice for Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl Chloride) (PVC) Resins
- ASTM D5165-93(1999) Standard Practice for Laboratory Preparation of Gelled Vehicles Using a Resin Kettle
- ASTM D5165-93(2004) Standard Practice for Laboratory Preparation of Gelled Vehicles Using a Resin Kettle
- ASTM C881/C881M-14 Standard Specification for Epoxy-Resin-Base Bonding Systems for Concrete
- ASTM C881/C881M-15 Standard Specification for Epoxy-Resin-Base Bonding Systems for Concrete
- ASTM D8245-19 Standard Guide for Disposal of Resin-Containing Cannabis Raw Materials and Downstream Products
- ASTM D3517-96 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
- ASTM D3517-01 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
- ASTM F641-98a(2003) Standard Specification for Implantable Epoxy Electronic Encapsulants
- ASTM D3596-09 Standard Practice for Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl Chloride) (PVC) Resins
- ASTM F641-09 Standard Specification for Implantable Epoxy Electronic Encapsulants
- ASTM D3531-99(2009) Standard Test Method for Resin Flow of Carbon Fiber-Epoxy Prepreg
- ASTM D5165-12(2020) Standard Practice for Laboratory Preparation of Gelled Vehicles Using a Resin Kettle
- ASTM D5165-12 Standard Practice for Laboratory Preparation of Gelled Vehicles Using a Resin Kettle
- ASTM D3596-13 Standard Practice for Determination of Gels lpar;Fisheyesrpar; In General-Purpose Polylpar;Vinyl Chloriderpar; lpar;PVCrpar; Resins
- ASTM D3517-04 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
- ASTM D3517-03 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
- ASTM D6302-98(2017) Standard Practice for Evaluating the Kinetic Behavior of Ion Exchange Resins
- ASTM F641-09(2014) Standard Specification for Implantable Epoxy Electronic Encapsulants
- ASTM D6302-98 Standard Practice for Evaluating the Kinetic Behavior of Ion Exchange Resins
- ASTM D3517-06 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
- ASTM A882/A882M-04a(2010) Standard Specification for Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand
- ASTM D6302-98(2004) Standard Practice for Evaluating the Kinetic Behavior of Ion Exchange Resins
- ASTM D2517-18(2023) Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings
- ASTM D3596-92 Standard Practice for Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl Chloride) (PVC) Resins
- ASTM D3596-92(2001) Standard Practice for Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl Chloride) (PVC) Resins
- ASTM D4266-96(2001) Standard Test Methods for Precoat Capacity of Powdered Ion-Exchange Resins
- ASTM D5685-01 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings
- ASTM D3517-19 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
- ASTM D5685-19 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings
- ASTM D2517-18 Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings
- ASTM D4266-96(2007) Standard Test Methods for Precoat Capacity of Powdered Ion-Exchange Resins
- ASTM D4266-96(2009)e1 Standard Test Methods for Precoat Capacity of Powdered Ion-Exchange Resins
- ASTM D3754-96 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe
- ASTM D3754-01 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe
- ASTM D3754-03 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe
- ASTM D3754-04 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe
- ASTM D3754-06 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe
- ASTM D3517-11 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
- ASTM D2924-01(2006) Standard Test Method for External Pressure Resistance of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
- ASTM D2924-01 Standard Test Method for External Pressure Resistance of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
- ASTM D2924-99 Standard Test Method for External Pressure Resistance of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
- ASTM D2924-12 Standard Test Method for External Pressure Resistance of ldquo;Fiberglassrdquo; (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
- ASTM D3517-14 Standard Specification for ldquo;Fiberglassrdquo; 40;Glass-Fiber-Reinforced Thermosetting-Resin41; Pressure Pipe
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Dali Resin Glue
- GB/T 12007.7-1989 Determination of gelation time of epoxide resins
- GB 12007.7-1989 Determination of gel time of epoxy resin
- GB/T 14074-2006 Testing methods for wood adhesives and their resins
- GB/T 14074-2017 Adhesives for wood industry and their resins test methods
- GB/T 7193.6-1987 Unsaturated polyester resin--Determination of gel time at 25 Centigrade
- GB/T 32472-2016 D113 macroporous weak acid acrylic type cation exchange resins
- GB/T 16579-1996 D001 macroporous strongly acidic styrene type cation exchange resins
- GB/T 16580-2013 D201 macroporous strongly basic styrene type anion exchange resins
- GB/T 16579-2013 D001 macroporous strongly acidic styrene type cation exchange resins
- GB/T 16580-1996 D201 macroporous strongly basic styrene type anion exchange resins
- GB/T 14074.10-1993 Test methods for wood adhesives and their resins - Determination of wood bonding strength
- GB/T 14074.4-1993 Test methods for wood adhesives and their resins pH determination
- GB/T 14074.1-1993 Inspection methods for wood adhesives and their resins Appearance determination method
- GB/T 14074.2-1993 Densitometry method for wood adhesives and their resins
- GB/T 14074.3-1993 Wood adhesives and their resins test method viscometry
- GB/T 14074.15-1993 Test methods for wood adhesives and their resins Alkalimetry
- GB/T 14074.8-1993 Test methods for wood adhesives and their resins - Determination of pot life
- GB/T 14074.11-1993 Test methods for wood adhesives and their resins - Determination of moisture content
- GB/T 14732-2006 Wood adhesives:urea formaldehyde,phenol formaldehyde and melamine formaldehyde resins
- GB/T 14732-1993 Wood adhesives:urea-formaldehyde, phenol-formaldehyde and melamine-formaldehyde resins
- GB/T 14074.5-1993 Test methods for wood adhesives and their resins - Determination of solid content
- GB/T 14074.6-1993 Test methods for wood adhesives and their resins - Determination of water miscibility
- GB/T 14074.7-1993 Test methods for wood adhesives and their resins - Determination of curing time
- GB/T 14074.12-1993 Test methods for wood adhesives and their resins - Determination of polymerization time
- GB/T 14074.18-1993 Test methods for wood adhesives and their resins - Determination of precipitation temperature
- GB/T 14074.9-1993 Test methods for wood adhesives and their resins - Determination of storage stability
- GB/T 14074.14-1993 Test methods for wood adhesives and their resins can be replaced by bromide determination method
- GB/T 14074.17-1993 Test methods for wood adhesives and their resins - Determination of hydroxymethyl content
- GB/T 14074.13-1993 Test methods for wood adhesives and their resins - Determination of free phenol content
- GB/T 14074.16-1993 Test methods for wood adhesives and their resins - Determination of free formaldehyde content
- GB/T 34722-2017(英文版) Surface decorated plywood and blockboard with paper impregnated thermosetting resins
GM North America, Dali Resin Glue
Professional Standard - Forestry, Dali Resin Glue
YU-JUS, Dali Resin Glue
- JUS B.B3.250-1984 Composed marbles bound with resin. Technical requirements.
- JUS G.S1.803-1990 Plastics. Unsaturated polyester resins. Measurement of gel time at 25 °C
- JUS N.A8.222-1993 Specification for solventless polymerisable resinous compounds used in electrical insulation - Specifications for individual materials - Unfilled epoxy resinous compounds
RU-GOST R, Dali Resin Glue
- GOST 22181-2015 Unsaturated polyester resins. Methods for determination of gel time at ambient temperature
- GOST 22181-1991 Unsaturated polyester resins. Methods for determination of gel time
- GOST R ISO 5833-2005 Implants for surgery. Acrylic resin cements
- GOST R 57884-2017 Plastics. Phenolic resins. Determination of the gel time of resols under specific conditions using automatic apparatus
- GOST 29326-1992 Plastics. Phenolic resins. Determination of reactivity of resols under acid conditions
- GOST R 57779-2017 Plastics. Phenolic resins. Determination of gel time on a test plate
United States Navy, Dali Resin Glue
- NAVY MIL-R-21607 E-1990 RESINS, POLYESTER, LOW PRESSURE LAMINATING, FIRE-RETARDANT
- NAVY A-A-59398-2004 GASKET MATERIAL, SILICONE GEL WITH MONEL MATRIX OR EQUIVALENT
- NAVY MIL-I-24718 (1)-1993 INSULATING RESINS, SOLVENTLESS, VACUUM-PRESSURE-IMPREGNATING; GENERAL SPECIFICATION FOR
- NAVY MIL-I-24718-1990 INSULATING RESINS, SOLVENTLESS, VACUUM-PRESSURE-IMPREGNATING; GENERAL SPECIFICATION FOR
- NAVY MIL-P-5431 A NOTICE 1-1997 PLASTIC-PHENOLIC, GRAPHITED, SHEETS, RODS, TUBES AND SHAPES
- NAVY MIL-P-5431 A (1)-1968 PLASTIC-PHENOLIC, GRAPHITED, SHEETS, RODS, TUBES AND SHAPES
- NAVY MIL-P-5431 A-1967 PLASTIC-PHENOLIC, GRAPHITED, SHEETS, RODS, TUBES AND SHAPES
- NAVY L-P-383 VALID NOTICE 1-1991 PLASTIC MATERIAL, POLYESTER RESIN, GLASS FIBER BASE, LOW PRESSURE LAMINATED
- NAVY L-P-383 (1)-1973 PLASTIC MATERIAL, POLYESTER RESIN, GLASS FIBER BASE, LOW PRESSURE LAMINATED
- NAVY L-P-383-1967 PLASTIC MATERIAL, POLYESTER RESIN, GLASS FIBER BASE, LOW PRESSURE LAMINATED
- NAVY MIL-P-25395 B NOTICE 1-1996 PLASTIC MATERIALS, HEAT RESISTANT, LOW PRESSURE LAMINATED, GLASS FIBER BASE, POLYESTER RESIN
- NAVY MIL-P-25395 B-1986 PLASTIC MATERIALS, HEAT RESISTANT, LOW PRESSURE LAMINATED, GLASS FIBER BASE, POLYESTER RESIN
国家市场监督管理总局、中国国家标准化管理委员会, Dali Resin Glue
- GB/T 36797-2018 Epoxy resin joint sealant for anti-cracking in refurbishment
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Dali Resin Glue
- GB/T 33315-2016 Plastics—Phenolic resins—Determinaiton of the gel time
- GB/T 15022.7-2017 Resin based reactive compounds used for electrical insulation—Part 7: Epoxy-anhydride vacuum pressure impregnation(VPI) resin
- GB/T 14732-2017 Wood adhesives: urea-formaldehyde, phenol-formaldehyde and melamine-formaldehyde resins
- GB/T 15022.8-2017 Resin based reactive compounds used for electrical insulation— Part 8:Epoxy modified unsaturated polyester vacuum pressure impregnation (VPI) resin
US-FCR, Dali Resin Glue
European Committee for Standardization (CEN), Dali Resin Glue
- EN 12003:1997 Adhesives for Tiles - Determination of Shear Adhesion Strength of Reaction Resin Adhesives
- HD 307.3.1 S1-1986 Specification for solventless polymerisable resinous compounds used for electrical insulation; part 3: specifications for individual materials; sheet 1: unfilled epoxy resinous compounds
- EN 10289:2002 Steel tubes and fittings for onshore and offshore pipelines - External liquid applied epoxy and epoxy-modified coatings
- HD 307.3.2 S1-1989 Specification for solventless polymerisable resinous compounds used for electrical insulation; part 3: specifications for individual materials; sheet 2: quartz filled epoxy resinous compounds
- EN ISO 2535:1998 Plastics - Unsaturated Polyester Resins - Measurement of Gel Time at 25 Degrees Celsius ISO 2535:1997
- EN 12003:2008/AC:2009 Adhesive for tiles - Determination of shear adhesion strength of reaction resin adhesives
- EN ISO 2535:2002 Plastics - Unsaturated polyester resins - Measurement of gel time at ambient temperature ISO 2535:2001
- EN 655:2011 Resilient floor coverings - Tiles of agglomerated composition cork with polyvinyl chloride wear layer - Specification
- EN ISO 9396:1995 Plastics - Phenolic Resins - Determination of the Gel Time at a Given Temperature Using Automatic Apparatus (ISO 9396 : 1989)
- HD 307.2 S1-1986 Specification for solventless polymerisable resinous compounds used for electrical insulation; part 2: methods of test
CEN - European Committee for Standardization, Dali Resin Glue
- EN 12003:2008 Adhesive for tiles - Determination of shear adhesion strength of reaction resin adhesives
International Organization for Standardization (ISO), Dali Resin Glue
- ISO 6907:1984 Rubber footwear; Vulcanized resin rubber and vulcanized hard rubber soling materials; Specification
- ISO 6907:1994 Rubber footwear - Vulcanized resin rubber and vulcanized high-hardness rubber soling material - Specifications
- ISO 14655:1999 Epoxy-coated strand for the prestressing of concrete
- ISO 2535:2001 Plastics - Unsaturated-polyester resins - Measurement of gel time at ambient temperature
- ISO 2535:1997 Plastics - Unsaturated polyester resins - Measurement of gel time at 25 °C
- ISO 2535:1974 Plastics; Unsaturated polyester resins; Measurement of gel time at 25 degrees C
- ISO 8619:1988 Plastics; phenolic resin powder; determination of flow distance on a glass plate
- ISO 2114:2000 Plastics (polyester resins) and paints and varnishes (binders) - Determination of partial acid value and total acid value
- ISO 9396:1989 Plastics; phenolic resins; determination of the gel time at a given temperature using automatic apparatus
Institute of Interconnecting and Packaging Electronic Circuits (IPC), Dali Resin Glue
SE-SIS, Dali Resin Glue
Professional Standard - Textile, Dali Resin Glue
German Institute for Standardization, Dali Resin Glue
- DIN EN ISO 9396:2001 Plastics - Phenolic resins - Determination of the gel time of resols under specific conditions using automatic apparatus (ISO 9396:1997); German version EN ISO 9396:2000
- DIN EN ISO 9396:2001-02 Plastics - Phenolic resins - Determination of the gel time of resols under specific conditions using automatic apparatus (ISO 9396:1997); German version EN ISO 9396:2000
- DIN EN ISO 2535:2003 Plastics - Unsaturated polyester resins - Measurement of gel time at ambient temperature (ISO 2535:2001); German version EN ISO 2535:2002
- DIN EN 12003:2009 Adhesive for tiles - Determination of shear adhesion strength of reaction resin adhesives; English version of DIN EN 12003:2009-01
- DIN EN ISO 2535:2003-02 Plastics - Unsaturated polyester resins - Measurement of gel time at ambient temperature (ISO 2535:2001); German version EN ISO 2535:2002
- DIN EN 2261:1995 Aerospace series - Silicone rubber (VMQ) - Hardness 70 IRHD; German version EN 2261:1995
- DIN EN 2259:1995 Aerospace series - Silicone rubber (VMQ) - Hardness 50 IRHD; German version EN 2259:1995
- DIN EN 2260:1995 Aerospace series - Silicone rubber (VMQ) - Hardness 60 IRHD; German version EN 2260:1995
- DIN EN 12808-1:2009 Grouts for tiles - Part 1: Determination of chemical resistance of reaction resin mortars; English version of DIN EN 12808-1:2009-01
Defense Logistics Agency, Dali Resin Glue
IPC - Association Connecting Electronics Industries, Dali Resin Glue
IT-UNI, Dali Resin Glue
- UNI 11835-2021 Resinous floor coverings - Knowledge, skill and competence requirements for installers of resinous floor coverings
Professional Standard - Building Materials, Dali Resin Glue
- JC/T 552-2011 Filament-wound thermosetting resin pressured pipe
- JC 552-1994 Filament winding reinforced thermosetting resin pressure pipe
Professional Standard - Petrochemical Industry, Dali Resin Glue
- SH 2605.02-2003 D001 Strongly acidic macroporous styrene type cation exchange resins
- SH 2605.04-2003 D111 Wealy acidic macroporous polyacrylic type cation exchange resins
- SH 2605.05-2003 D113 Weakly acidic macroporous polyacrylic type cation exchange resins
- SH 2605.07-2003 D201 Macroporous strongly basic styrene type anion exchange resins
- SH 2605.09-2003 D301 Weakly basic macroporous styrene type anion exchange resins
- SH 2605.02-1997 D001 macroporous strongly acidic styrene-based cation exchange resin
- SH 2605.04-1997 D111 macroporous weakly acidic acrylic cation exchange resin
- SH 2605.05-1997 D113 macroporous weakly acidic acrylic cation exchange resin
- SH 2605.09-1997 D301 macroporous weakly basic styrene-based anion exchange resin
- SH 2605.07-1997 D201 macroporous strongly basic styrene-based anion exchange resin
- SH 2605.08-2003 D202 Macroporous strongly basic styrene type anion exchange resins
- SH 2605.08-1997 D202 Macroporous Type II Strongly Basic Styrenic Anion Exchange Resin
化学工业部, Dali Resin Glue
- HG 2165-1991 D301 macroporous weakly basic styrenic anion exchange resin
AASHTO - American Association of State Highway and Transportation Officials, Dali Resin Glue
- T237-1973 Standard Specification for Testing Epoxy Resin Adhesive (Nineteenth Edition)
Professional Standard - Agriculture, Dali Resin Glue
- SN/T 5062-2018 Determination of Resin Acid in Adhesives by High Performance Liquid Chromatography
Military Standard of the People's Republic of China-General Armament Department, Dali Resin Glue
- GJB 1059.4-1990 Phenolic Resin Test Method for Ablative Materials Gel Time Test
- GJB 9435-2018 Specification for microbead resin composite solid buoyancy materials for deep sea use
- GJB 1059.4A-2020 Test Methods for Phenolic Resins for Ablative Materials Part 4: Gel Time Test
Professional Standard - Electricity, Dali Resin Glue
- DL/T 1138-2009 Powdered ion-exchange resins used in water treatment of thermal power plants
- DL/T 519-2004 Acceptance criterion for ion exchange resins used in water treatment in fossil-fired power plants
- DL/T 519-1993 Inspecting Standard on lon Exchange Resins for Water Treatment in Thermal Power Plants
European Committee for Electrotechnical Standardization(CENELEC), Dali Resin Glue
- HD 307.3.11 S1-1990 Specification for Solventless Polymerisable Resinous Compounds Used for Electrical Insulation Part 3: Specification for Individual Materials Sheet 11: Epoxy Resin- Based Coating Powders
- HD 307.1 S2-1981 Specification for Solventless Polymerizable Resinous Compounds Used for Electrical Insulation - Part 1: Definitions and General Requirements. Basis for Classification of Polymerisable Resinous Compounds
ACI - American Concrete Institute, Dali Resin Glue
- ACI 503.6R-1997 Guide for the Application of Epoxy and Latex Adhesives for Bonding Freshly Mixed and Hardened Concretes
- ACI 548.11R-2012 Guide for the Application of Epoxy and Latex Adhesives for Bonding Freshly Mixed and Hardened Concretes
ZA-SANS, Dali Resin Glue
- SANS 1305:1980 Sealing compounds for the building industry, one-component, silicone-rubber-base
American Water Works Association (AWWA), Dali Resin Glue
- AWWA C620-2007 Spray-Applied In-Place Epoxy Lining of Water Pipelines, 3 In. (75 mm) and Larger
AENOR, Dali Resin Glue
- UNE 20175:1985 PAINTING SYSTEMS FOR POWER TRANSFORMERS. FULL FINISHING OF EPOXY-POLYUETAN PAINT
- UNE-EN ISO 2535:2003 Plastics-Unsaturated polyester resins- Measurement of gel time at ambient temperature. (ISO 2535:2001)
Danish Standards Foundation, Dali Resin Glue
- DS/EN ISO 2535:2003 Plastics - Unsaturated polyester resins - Measurement of gel time at ambient temperature
- DS/EN ISO 9396:2000 Plastics - Phenolic resins - Determination af the gel time at a given temperature using automatic apparatus
Professional Standard - Aerospace, Dali Resin Glue
- QJ 3215-2005 Epoxy resin sticking technical requirements for space electron element
Lithuanian Standards Office , Dali Resin Glue
- LST EN ISO 2535:2003 Plastics - Unsaturated polyester resins - Measurement of gel time at ambient temperature (ISO 2535:2001)
Professional Standard - Petroleum, Dali Resin Glue
- SY/T 0323-2000 Code for construction and acceptance of glass fiber reinforced thermosetting resin pressure pipelines
Professional Standard - Aviation, Dali Resin Glue
- HB/Z 272-1995 Process requirements for stress wave riveting of carbon fiber epoxy resin composite components
国家能源局, Dali Resin Glue
- NB/T 25087-2018 Test method for kinetic properties of ion exchange resins used in nuclear power plant water treatment
- NB/T 10654-2021 Test methods for thermosetting epoxy resins for wind turbine blades
International Electrotechnical Commission (IEC), Dali Resin Glue
- IEC 60893-3-2:2011 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxide resins