ZH
RU
ES

How does the alloy dissolve

How does the alloy dissolve, Total:300 items.

In the international standard classification, How does the alloy dissolve involves: Materials for aerospace construction, Corrosion of metals, Non-ferrous metals, Powder metallurgy, Testing of metals, Products of non-ferrous metals, Analytical chemistry, Aerospace fluid systems and components, Iron and steel products, Protection against dangerous goods, Ferroalloys.

Professional Standard - Aviation, How does the alloy dissolve

HB 5218.11-1982 Determination of dissolved zirconium in aluminum alloy
HB 5219.8-1982 Determination of dissolved zirconium and total zirconium in magnesium alloy
HB 5219.15-1998 Determination of dissolved zirconium content by quercetin photometric method for chemical analysis of magnesium alloys
HB 5218.16-1995 Aluminum Alloy Chemical Analysis Method Quercetin Spectrophotometric Determination of Dissolved Zirconium Content
HB 5218.16-1982 Aluminum Alloy Chemical Analysis Method Quercetin Spectrophotometric Determination of Dissolved Zirconium Content
HB 5218.15-1995 Aluminum Alloy Chemical Analysis Method Xylenol Orange Photometric Determination of Dissolved Zirconium Content
HB 7266.8-1996 Analytical Method for Chemical Composition of Aluminum-Lithium Alloy Quercetin Spectrophotometric Determination of Dissolved Zirconium Content
HB/Z 5218.16-2004 Methods for chemical analysis of aluminium alloys-Part 16:Determination of zirconium content by quercetin spectrophotometric method
HB/Z 5218.15-2004 Methods for chemical analysis of aluminium alloys-Part 15:Determination of zirconium content by xylenol orange spectrophotometric method

Society of Automotive Engineers (SAE), How does the alloy dissolve

SAE AMS4725E-2007 Copper-Beryllium Alloy Wire 98Cu 1.9Be, Solution Heat Treated
SAE AMS4152M-2007 Aluminum Alloy Extrusions 4.4Cu - 1.5Mg - 0.60Mn (2024-T3) Solution Heat Treated UNS A92024
SAE AMS4100E-2010 Aluminum Alloy, Alclad, Sheet 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (Alclad 7475-T761) Solution and Precipitation Heat Treated (UNS A87475)
SAE AMS4270B-2007 Aluminum Alloy, Alclad Flat Sheet, 4.1Cu - 1.4Mg - 0.45Mn (Alclad 2424-T3), Solution Heat Treated and Cold Worked
SAE AMS4890C-2005 Copper-Beryllium Alloy Castings, 97Cu 2.1Be 0.52Co 0.28Si, Solution Heat Treated (TB00)
SAE AMS4215H-2008 Aluminum Alloy, Castings 5.0Si - 1.2Cu - 0.50Mg (C355.0-T6) Solution and Precipitation Heat Treated UNS A33550
SAE AMS4973G-2012 Titanium Alloy Forgings 8Al 1Mo 1V Solution Heat Treated and Stabilized
SAE AMS4976H-2012 Titanium Alloy, Forgings 6.0Al 2.0Sn 4.0Zr 2.0Mo Solution and Precipitation Heat Treated
SAE AMS4194D-2012 Aluminum Alloy, Sheet and Plate, Alclad 4.4Cu - 1.5Mg - 0.60Mn (2024 -T361 Sheet/Plate with 1?% Alclad) Solution Heat Treated, 6% Cold Worked and Naturally Aged (UNS A82024)
SAE AMS4475A-2013 Aluminum Alloy, Coiled Sheet, Alclad, 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024; -T4 Coiled Sheet), Solution Heat Treated
SAE AMS4455G-2012 Magnesium Alloy, Investment Castings 10Al (AM100A-T6) Solution and Precipitation Heat Treated (UNS M10100)
SAE AMS4917G-2008 Titanium Alloy Sheet, Strip, and Plate 13.5V - 11Cr - 3.0Al Solution Heat Treated UNS R58010
SAE AMS4446B-2006 Magnesium Alloy, Sand Castings 8.7Al - 0.70Zn - 0.26Mn (AZ91E-T6) Solution and Precipitation Heat Treated UNS M11919
SAE AMS4484K-2007 Magnesium Alloy Castings, Permanent Mold 9.0Al - 2.0Zn (AZ92A-T6) Solution and Precipitation Heat Treated UNS M11920
SAE AMS4530H-2010 Copper-Beryllium Alloy Sheet, Strip, and Plate, 98Cu 1.9Be, Solution Heat Treated (TB00)
SAE AMS4446C-2012 Magnesium Alloy, Sand Castings 8.7Al 0.70Zn 0.26Mn Solution and Precipitation Heat Treated
SAE AMS4217H-2007 Aluminum Alloy, Castings 7.0Si - 0.32Mg (356.0-T6) Solution and Precipitation Heat Treated UNS A03560
SAE AMS4214J-2008 Castings, Aluminum Alloy Sand 5.0Si 1.2Cu 0.50Mg Solution Heat Treated and Stabilized
SAE AMS4976G-2008 Titanium Alloy, Forgings 6.0Al 2.0Sn 4.0Zr 2.0Mo Solution and Precipitation Heat Treated
SAE AMS4989B-2010 Titanium Alloy Sheet, Strip, and Plate 3Al 2.5V Solution Heat Treated
SAE AMS4418H-2012 Magnesium Alloy, Sand Castings 2.5Ag - 2.1Di - 0.70Zr (QE22A-T6) Solution and Precipitation Heat Treated (UNS M18220)
SAE AMS4483D-2007 Magnesium Alloy Castings, Permanent Mold 10Al (AM100A-T6) Solution and Precipitation Heat Treated UNS M10100
SAE AMS4453F-2012 Magnesium Alloy, Investment Castings 9.0Al 2.0Zn (AZ92A-T6) Solution and Precipitation Heat Treated
SAE AMS6930D-2012 Titanium Alloy Bars, Forgings and Forging Stock 6.0Al 4.0V Solution Heat Treated and Aged
SAE AMS6930E-2014 Titanium Alloy Bars, Forgings and Forging Stock, 6.0Al - 4.0V, Solution Heat Treated and Aged
SAE AMS4285E-2011 Aluminum Alloy Castings, Centrifugal, 7.0Si 0.3Mg (356.0-T6) Solution and Precipitation Heat Treated
SAE AMS4903A-2007 Titanium Alloy Sheet, Strip, and Plate 6Al 4V Solution Heat Treated
SAE AMS4903B-2011 Titanium Alloy Sheet, Strip, and Plate 6Al 4V Solution Heat Treated
SAE AMS4904B-2011 Titanium Alloy Sheet, Strip, and Plate 6Al 4V Solution Heat Treated and Aged
SAE AMS4934E-2007 Titanium Alloy, Extrusions and Flash Welded Rings 6Al - 4V Solution Heat Treated and Aged
SAE AMS4427C-2012 Magnesium Alloy Castings, Sand 4.0Y 2.3Nd 0.7Zr (WE43B - T6) Solution and Precipitation Heat Treated
SAE AMS4533D-2013 Copper-Beryllium Alloy, Bars and Rods 98Cu 1.9Be Solution and Precipitation Heat Treated (TF00, formerly AT)
SAE AMS4235B-2008 Aluminum Alloy Castings 4.6Cu - 0.35Mn - 0.25Mg - 0.22Ti (A206.0-T71) Solution and Precipitation Heat Treated UNS A12060
SAE AMS4219F-2010 Aluminum Alloy Castings 7.0Si 0.55Mg, 0.12Ti 0.06Be (A357.0 T6) Solution and Precipitation Heat Treated
SAE AMS4973F-2008 Titanium Alloy Forgings 8Al - 1Mo - 1V Solution Heat Treated and Stabilized UNS R54810
SAE AMS4970J-2012 Titanium Alloy Bars, Wire, and Forgings 7A1 4Mo Solution and Precipitation Heat Treated
SAE AMS4260G-2008 Aluminum Alloy, Investment Castings 7.0Si 0.32Mg (356.0-T6) Solution and Precipitation Heat Treated
SAE AMS4285D-2008 Aluminum Alloy Castings, Centrifugal, 7.0Si 0.3Mg (356.0-T6) Solution and Precipitation Heat Treated
SAE AMS4100D-2007 Aluminum Alloy, Alclad, Sheet 5.7Zn 2.2Mg 1.6Cu 0.22Cr (Alclad 7475-T761) Solution and Precipitation Heat Treated
SAE AMS4049L-2010 Aluminum Alloy, Sheet and Plate, Alclad 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (Alclad 7075; -T6 Sheet - T651 Plate) Solution and Precipitation Heat Treated (UNS A97075)
SAE AMS4429A-2012 Magnesium Alloy Castings, Sand 2.8Nd 1.4Gd 0.4Zn 0.6Zr (EV31A - T6), Solution and Precipitation Heat Treated
SAE AMS5894B-2004 Cobalt Alloy, Bars, Sheet, and Plate 60Co 28Cr 4.5W 1.15C Solution Heat Treated
SAE AMS4452E-2012 Magnesium Alloy, Investment Castings 8.7Al 0.70Zn 0.22Mn (AZ 91C-T6) Solution and Precipitation Heat Treated
SAE AMS4078G-2007 Aluminum Alloy Plate (7075-T7351) Solution Heat Treated, Stress Relieved, and Overaged UNS A97075
SAE AMS4111D-2007 Aluminum Alloy Forgings 7.7Zn - 2.5Mg - 1.5Cu - 0.16Cr (7049-T73) Solution and Precipitation Heat Treated UNS A97049
SAE AMS4141F-2008 Aluminum Alloy Die Forgings, 5.6Zn 2.5Mg 1.6Cu 0.23Cr (7075-T73) Solution and Precipitation Heat Treated
SAE AMS4101E-2012 Aluminum Alloy, Plate 4.4Cu 1.5Mg 0.60Mn (2124-T851) Solution Heat Treated, Stretched, and Precipitation Heat Treated
SAE AMS4236C-2013 Aluminum Alloy Castings 4.6Cu 0.35Mn 0.25Mg 0.22Ti (A206.0-T4) Solution Heat Treated and Naturally Aged
SAE AMS6925A-2011 Titanium Alloy Bars, Forgings and Forging Stock 13V 11Cr 3Al Solution Heat Treated
SAE AMS4988A-2008 Titanium Alloy Sheet, Strip, and Plate 6Al 6V 2Sn Solution Heat Treated
SAE AMS4242B-2007 Aluminum Alloy, Castings 4.7Cu - 0.60Ag - 0.35Mn - 0.25Mg - 0.25Ti (B201.0-T7) Solution Heat Treated and Overaged
SAE AMS4427B-2007 Magnesium Alloy Castings, Sand 4.0Y - 2.3Nd - 0.7Zr (WE43B - T6) Solution and Precipitation Heat Treated UNS M18432
SAE AMS4904A-2007 Titanium Alloy Sheet, Strip, and Plate 6Al 4V Solution Heat Treated and Aged
SAE AMS4218J-2010 Aluminum Alloy Castings 7.0Si 0.35Mg (A356.0-T6P) (Formerly T6P Temper) Solution and Precipitation Heat Treated
SAE AMS5225F-2009 Iron-Nickel Alloy Strip 49Fe 5.3Cr 42Ni 2.5Ti 0.55Al, Solution Heat Treated, Cold Rolled, 50% Reduction
SAE AMS4284H-2008 Aluminum Alloy Castings, Permanent Mold 7.0Si 0.30Mg (355.0-T6) Solution and Precipitation Heat Treated
SAE AMS4166F-2003 Aluminum Alloy, Extrusions 5.6Zn 2.5Mg 1.6Cu 0.23Cr (7075-T73) Solution Heat Treated and Overaged
SAE AMS4650M-2013 Copper-Beryllium Alloy, Bars, Rods, Shapes, and Forgings 98Cu 1.9Be Solution Heat Treated TB00 (A)
SAE AMS4156K-2003 Aluminum Alloy, Extrusions 0.68Mg 0.40Si (6063-T6) Solution and Precipitation Heat Treated
SAE AMS4082P-2008 Aluminum Alloy, Seamless Drawn Tubing, 1.0Mg 0.60Si 0.28Cu 0.20Cr (6061-T6) Solution and Precipitation Heat Treated
SAE AMS4223D-2007 Aluminum Alloy, Castings 4.5Cu - 0.70Ag - 0.30Mn - 0.25Mg - 0.25Ti (A201.0-T4) Solution Heat Treated and Naturally Aged
SAE AMS4161H-2013 Aluminum Alloy, Extrusions 1.0Mg 0.60Si 0.28Cu 0.20Cr (6061-T4) Solution Heat Treated and Naturally Aged
SAE AMS6920B-2011 Titanium Alloy Bars, Forgings and Forging Stock 3Al 8V 6Cr 4Mo 4Zr Solution Heat Treated
SAE AMS4965J-2007 Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0Al 4.0V Solution Heat Treated and Aged
SAE AMS4981E-2008 Titanium Alloy Bars, Wire, and Forgings 6.0Al 2.0Sn 4.0Zr 6.0Mo Solution and Precipitation Heat Treated
SAE AMS4979G-2012 Titanium Alloy, Bars, Wire, Forgings, and Rings 6A1 6V 2Sn Solution and Precipitation Heat Treated
SAE AMS4975L-2012 Titanium Alloy, Bars, Wire and Rings, 6.0Al 2.0Sn 4.0Zr 2.0Mo 0.08Si, Solution and Precipitation Heat Treated
SAE AMS4303B-2000 Aluminum Alloy Plate, 2.7Cu 2.2Li 0.12Zr (2090-T81) Solution Heat Treated, Cold Worked, and Aged
SAE AMS4280J-2008 Aluminum Alloy Castings, Permanent Mold, 5.0Si 1.2Cu 0.5Mg (355.0-T71) Solution Heat Treated and Overaged
SAE AMS4281G-2008 Aluminum Alloy Castings, Permanent Mold 5.0Si 1.2Cu 0.5Mg (355.0-T6) Solution and Precipitation Heat Treated
SAE AMS4418G-2004 Magnesium Alloy, Sand Castings 2.5Ag - 2.1Di - 0.70Zr (QE22A-T6) Solution and Precipitation Heat Treated
SAE AMS4407-2007 Aluminum Alloy, Plate (7056-T7651) 9.1Zn - 1.6Cu - 1.9Mg Solution Heat Treated, Stress Relieved, and Overaged UNS A97056
SAE AMS4347C-2007 Aluminum Alloy Sheet 1.0Mg - 0.8Si - 0.8Cu - 0.5Mn (6013-T4) Solution Heat Treated and Naturally Aged UNS A96013
SAE AMS4950C-2011 Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0Al 4.0V Solution Heat Treated and Aged Modified Strength
SAE AMS4213A-2011 Aluminum Alloy Plate (2027-T351) 4.4Cu - 1.2Mg - 0.8Mn - 0.10Zr Solution Heat Treated, Cold Worked and Naturally Aged
SAE AMS4933D-2008 Titanium Alloy Extrusions and Flash Welded Rings 8Al - 1Mo - 1V Solution Heat Treated and Stabilized UNS R54810
SAE AMS4933E-2012 Titanium Alloy Extrusions and Flash Welded Rings 8Al 1Mo 1V Solution Heat Treated and Stabilized
SAE AMS5771F-2009 Nickel Alloy, Corrosion and Heat -Resistant, Bars, Forgings and Rings 74Ni 7.0Cr 16.5Mo Solution Heat Treated
SAE AMS5833D-2014 Cobalt Alloy, Corrosion and Heat-Resistant, Round Wire 20Cr - 15Ni - 40Co - 7.0Mo - 16Fe Solution Heat Treated and Cold Drawn
SAE AMS4472-2011 Aluminum Alloy, Plate 4.0Cu 1.oLi 0.40Mg 0.35Ag 0.132Zr (2195-T34) Solution Heat Treated and Stress Relieved
SAE AMS4133D-2000 Aluminum Alloy Forgings and Rolled Rings 4.4Cu 0.85Si 0.80Mn 0.50Mg (2014-T6)Solution and Precipitation Heat Treated
SAE AMS4123H-2006 Aluminum Alloy, Rolled or Cold Finished Bars and Rods (7075-T651) Solution and Precipitation Heat Treated
SAE AMS4088K-2007 Aluminum Alloy, Drawn, Seamless Tubing 4.4Cu - 1.5Mg - 0.60Mn (2024-T3) Solution Heat Treated and Cold Worked UNS A92024
SAE AMS4211B-2007 Alluminum Alloy, Plate 6.2Zn - 1.9Cu - 2.1Mg - 0.10Zr (7040-T7451) Solution Heat Treated, Stress Relieved, and Overaged UNS A97040
SAE AMS6930B-2011 Titanium Alloy Bars, Forgings and Forging Stock 6.0Al 4.0V Solution Heat Treated and Aged
SAE AMS6935A-2011 Titanium Alloy Bars, Forgings and Forging Stock 6.0Al 6.0V 2.0Sn Solution Heat Treated and Aged
SAE AMS6926A-2011 Titanium Alloy Bars, Forgings and Forging Stock 13V 11Cr 3Al Solution Heat Treated and Aged
SAE AMS4975J-2007 Titanium Alloy, Bars, Wire and Rings, 6.0Al 2.0Sn 4.0Zr 2.0Mo 0.08Si, Solution and Precipitation Heat Treated
SAE AMS4979F-2008 Titanium Alloy, Bars, Wire, Forgings, and Rings 6A1 6V 2Sn Solution and Precipitation Heat Treated
SAE AMS4306B-2007 Aluminum Alloy, Plate 6.4Zn - 2.4Mg - 2.2Cu - 0.12Zr (7150-T6151) Solution Heat Treated, Stress Relieved, and Aged UNS A97150
SAE AMS4417B-2011 Castings, Sand, Magnesium Alloy, 1.5Ag 2.1Di 0.08Cu 0.70Zr (EQ21-T6) Solution and Precipitation Heat Treated
SAE AMS4482-2012 Cast Aluminum Alloy Composite 4.6 Cu - 3.4Ti - 1.4B - 0.75Ag - 0.27Mg (A205.0/TiB2/3p-T7P) Sand Cast, Solution and Precipitation Heat Treated
SAE AMS5608F-2010 Cobalt Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 40Co - 22Cr - 22Ni - 14.5W - 0.07La Solution Heat Treated (UNS R30188)
SAE AMS5771E-2004 Nickel Alloy, Corrosion and Heat -esistant, Bars, Forgings and Rings 74Ni 7.0Cr 16.5Mo Solution Heat Treated
SAE AMS4511A-2004 Copper-Beryllium Alloy Castings, 97Cu 2.1Be 0.52(Co + Ni) 0.28Si, Solution and Precipitation Heat Treated (TF00)
SAE AMS4154N-2003 Aluminum Alloy, Extrusions 5.6Zn 2.5Mg 1.6Cu 0.23Cr (7075-T6) Solution and Precipitation Heat Treated
SAE AMS4153K-2003 Aluminum Alloy, Extrusions 4.5Cu 0.85Si 0.80Mn 0.50Mg (2014-T6) Solution and Precipitation Heat Treated
SAE AMS4113E-2003 Aluminum Alloy, Extruded Profiles 1.0Mg 0.60Si 0.28Cu 0.20Cr (6061-T6) Solution and Precipitation Heat Treated
SAE AMS4133E-2009 Aluminum Alloy Forgings and Rolled Rings 4.4Cu 0.85Si 0.80Mn 0.50Mg (2014-T6)Solution and Precipitation Heat Treated
SAE AMS4972F-2007 Titanium Alloy, Bars, Wire, and Rings 8A1 1Mo 1V Solution Heat Treated and Stabilized
SAE AMS4965K-2011 Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0Al 4.0V Solution Heat Treated and Aged
SAE AMS4965L-2014 Titanium Alloy, Bars, Wire, Forgings, and Rings, 6.0AI - 4.0V, Solution Heat Treated and Aged
SAE AMS4330B-2004 Aluminum Alloy, Plate (2297-T87) 2.8Cu - 1.5Li - 0.30Mn - 0.12Zr Solution Heat Treated, Stretched, and Artificially Aged UNS A92297
SAE AMS4411-2007 Aluminum Alloy Plate (7081-T7651) 7.2Zn - 1.5Cu - 2.0Mg - 0.10Zr Solution Heat Treated, Stress Relieved and Overaged UNS A97081
SAE AMS4471A-2014 Cast Aluminum Alloy Composite 4.6Cu - 3.4Ti - 1.4B - 0.75Ag - 0.27Mg (205.0/TiB2/3p-T7P) Investment Cast, Solution and Precipitation Heat Treated
SAE AMS4471-2012 Cast Aluminum Alloy Composite 4.6Cu 3.4Ti 1.4B 0.75Ag 0.27Mg (A205.0/TiB2/3p-T7P) Investment Cast, Solution and Precipitation Heat Treated
SAE AMS4457-2008 Aluminum Alloy, Sheet 3.5Cu-1.1Li-0.50Mg-0.40Ag-0.12Zr (20980-T8) Solution Heat Treated, Cold Worked, and Artificially Aged
SAE AMS4534C-2013 Copper-Beryllium Alloy, Bars and Rods 98Cu 1.9Be Solution Heat Treated, Cold Worked, and Precipitation Heat Treated (TH04, formerly HT)
SAE AMS4118L-2009 Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire, 4.0Cu 0.70Mn 0.60Mg 0.50Si, Solution Heat Treated
SAE AMS4226A-1974 Aluminum Alloy Castings, High Strength, 5.0Cu 0.35Mn 0.18Zr 0.10V, (224.0) Solution and Precipitation Heat Treated (Overaged)
SAE AMS4183A-2011 Aluminum Alloy, Extruded Profiles (2027-T3511) 4.4Cu 1.2Mg 0.8Mn 0.10Zr Solution Heat Treated and Stress Relieved by Stretching
SAE AMS4975K-2011 Titanium Alloy, Bars, Wire and Rings, 6.0Al 2.0Sn 4.0Zr 2.0Mo 0.08Si, Solution and Precipitation Heat Treated
SAE AMS4409-2007 Aluminum Alloy, Plate 4.0Zn - 2.0Mg - 0.32Mn (7019-T651) Solution Heat Treated, Stress Relieved and Artificially Aged UNS A97019
SAE AMS4412-2007 Aluminum Alloy, Sheet, 3.2Cu 0.52Mg 0.30Ag 0.12Zr (2198-T8) Solution Heat Treated, Cold Worked, and Artificially Aged
SAE AMS4332-2005 Aluminum Alloy, Extruded Profiles (73490T76511) 8.1Zn 1.7Cu 2.2Mg 0.16Zr Solution Heat Treated, Stress Relieved, and Overaged
SAE AMS5587F-2010 Nickel Alloy, Corrosion and Heat Resistant, Seamless Tubing 47.5Ni 22Cr 1.5Co 9.0Mo 0.60W 18.5Fe Solution Heat Treated
SAE AMS4950B-2007 Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0Al 4.0V Solution Heat Treated and Aged Modified Strength
SAE AMS4150L-2003 Aluminum Alloy, Extrusions and Rings 1.0Mg 0.60Si 0.28Cu 0.20Cr (6061-T6) Solution and Precipitation Heat Treated
SAE AMS4157D-2007 Aluminum Alloy Extrusions 7.7Zn - 2.4Mg - 1.6Cu - 0.16Cr (7049-T73511) Solution Heat Treated, Stress Relieved, and Overaged UNS A97049
SAE AMS4083L-2012 Aluminum Alloy Tubing, Hydraulic, Seamless, Drawn, Round 1.0Mg 0.60Si 0.28Cu 0.20Cr (6061-T6) Solution and Precipitation Heat Treated
SAE AMS4150M-2013 Aluminum Alloy, Extrusions and Rings 1.0Mg 0.60Si 0.28Cu 0.20Cr (6061-T6) Solution and Precipitation Heat Treated
SAE AMS4165H-2003 Aluminum Alloy, Extrusions 4.4Cu 1.5Mg 0.60Mn (2024-T3511) Solution Heat Treated, Stress-Relieved by Stretching, and Straightened
SAE AMS4297A-2006 Aluminum Alloy Sheet 4.4Cu - 1.5Mg - 0.60Mn (2024; -T4 Flat Sheet) Solution Heat Treated, High Formability UNS A92024
SAE AMS4270B-1997 Aluminum Alloy, Alclad Flat Sheet 4.1Cu 1.4Mg 0.45Mn Solution Heat Treated and Cold Worked
SAE AMS4410-2007 Aluminum Alloy Plate (7081-T7451) 7.2Zn - 1.5Cu - 2.0Mg - 0.10Zr Solution Heat Treated, Stress Relieved and Overaged UNS A97081
SAE AMS4041R-2012 Aluminum Alloy, Sheet and Plate, Alclad 4.4Cu - 1.5Mg - 0.60Mn (2024, -T3 Sheet/-T351 Plate with 1?% Alclad) Solution Heat Treated, Cold Worked and Naturally Aged (UNS A82024)
SAE AMS5585G-2010 Alloy, Corrosion and Heat Resistant, Welded Tubing 32Fe 21Cr 20Ni 20Co 3Mo 2.5W 1.0Cb (Nb) 0.15N Solution Heat Treated
SAE AMS5869C-2008 Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 62Ni - 21.5Cr - 9.0Mo - 3.7Cb Solution Heat Treated UNS N06625
SAE AMS4456-2012 Aluminum Alloy, Hand Forgings 8.0Zn 1.0Cu 1.6Mg 0.12Zr (7037-T7452) Solution Heat Treated, Compression Stress-Relieved, and Overaged
SAE AMS4470A-2012 Aluminum Alloy, Plate (7085-T7451) 7.5Zn 1.6Cu 1.5Mg 0.12Zr Solution Heat Treated, Stress-Relieved, and Overaged
SAE AMS4599-2011 Aluminum Alloy, Sheet and Plate 6.3Cu 0.30Mn 0.06Ti 0.10V 0.18Zr Solution and Precipitation Heat Treated (2219-T81/-T851)
SAE AMS4083K-2000 Aluminum Alloy Tubing, Hydraulic, Seamless, Drawn, Round 1.0Mg 0.60Si 0.28Cu 0.20Cr (6061-T6) Solution and Precipitation Heat Treated
SAE AMS4081J-2008 Aluminum Alloy, Tubing, Hydraulic, Seamless, Drawn, Round 1.0Mg 0.60Si 0.28Cu 0.20Cr (6061-T4) Solution Heat Treated and Naturally Aged
SAE AMS4068E-2009 Aluminum Alloy, Drawn Seamless Tubing 6.3Cu 0.30Mn 0.18Zr 0.10V 0.06Ti (2219-T3511) Solution Heat Treated and Stress Relieved by Stretching
SAE AMS4172E-2005 Aluminum Alloy, Extrusions 1.0Mg 0.60Si 0.28Cu 0.20Cr (6061-T4511) Solution Heat Treated and Stress Relieved by Stretching
SAE AMS4225D-2007 Aluminum Alloy, Heat-Resistant, Castings 5.0Cu - 1.5Ni - 0.25Mn - 0.25Sb - 0.25Co - 0.20Ti - 0.20Zr (203.0-T6) Solution Heat Treated and Precipitation Heat Treated
SAE AMS4273B-2006 Aluminum Alloy, Sheet and Plate (2424-T3 Flat Sheet and Plate) Solution Heat Treated and Cold Worked UNS A92424
SAE AMS4406-2007 Aluminum Alloy, Centrifugal Castings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (709.0-T61) Hot Isostatically Pressed, Solution and Precipitation Heat Treated
SAE AMS4414-2008 Aluminum Alloy, Hand Forgings 7.5Zn - 1.6Cu - 1.5Mg - 0.12Zr (7085-T7452) Solution Heat Treated, Compression Stress-Relieved, and Overaged UNS A97085
SAE AMS4415-2008 Aluminum Alloy Extrusions 8.9Zn-2.2Cu-2.2Mg-0.15Zr (7136-T76511, -T76510) Solution Heat Treated, Stress-Relieved, Straightened, and Overaged
SAE AMS4404A-2008 Aluminum Alloy, Extruded Profiles (6056-T4511) 1.0Si 0.90Mg 8.80Cu 0.60Mn 0.40Zn Solution Heath Treated and Stress-Relieved by Stretching
SAE AMS5592F-2013 Iron-Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 44Fe - 18.5Cr - 35Ni - 1.15Si, Solution Heat Treated
SAE AMS5870E-2012 Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip and Plate 60.5Ni 23Cr 14Fe 0.35Ti 1.4Al Solution Heat Treated
SAE AMS4323B-2003 Aluminum Alloy, Hand Forgings 5.6Zn 2.5Mg 1.6Cu 0.23Cr (7075-T7452) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated
SAE AMS4304A-2006 Aluminum Alloy, Discontinuously Reinforced Sheet 2009/SiC/15W (T8P) Solution Heat Treated, Stretched, and Precipitation Heat Treated
SAE AMS4338A-2007 Aluminum Alloy, Extrusions 4.0Cu - 1.3Mg - 0.60Mn (2026-T3511) Solution Heat Treated and Stress Relieved by Stretching UNS A92026
SAE AMS4415A-2008 Aluminum Alloy Extrusions 8.9Zn 2.2Cu 2.2Mg 0.15Zr (7136-T76511, -T76510) Solution Heat Treated, Stress-Relieved, Straightened, and Overaged
SAE AMS4957D-2008 Titanium Alloy, Round Bar and Wire 3AI - 8V - 6Cr - 4Mo - 4Zr Consumable Electrode Melted Solution Heat Treated and Cold Drawn UNS R58640
SAE AMS5878C-2007 Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 59Ni - 22Cr - 2Mo - 14W - 0.35AI - 0.03La Solution Heat Treated UNS N06230
SAE AMS4342E-2007 Aluminum Alloy, Extrusions 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T74511) Solution Heat Treated, Stress Relieved, Straightened, and Overaged UNS A97050
SAE AMS5599G-2007 Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 62Ni - 21.5Cr - 9.0Mo - 3.7 Cb (Nb) Solution Heat Treated UNS N06625
SAE AMS4958C-2008 Titanium Alloy Bars and Rods 3Al - 8V - 6Cr - 4Mo - 4Zr Consumable Electrode Melted Solution Heat Treated and Centerless Ground UNS R58640
SAE AMS4121H-2007 Aluminum Alloy Bars, Rods, and Wire, Rolled or Cold Finished 4.5Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T6) Solution and Precipitation Heat Treated UNS A92014
SAE AMS4078H-2010 Aluminum Alloy Sheet and Plate 5.6Zn 2.5Mg 1.6Cu 0.23Cr 7075 (-T73 Sheet -T7351 Plate) Solution Heat Treated, Stress Relieved, and Overaged
SAE AMS4143E-2007 Aluminum Alloy Forgings and Rolled or Forged Rings 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T6) Solution and Precipitation Heat Treated UNS A92219
SAE AMS4132G-2013 Aluminum Alloy, Die and Hand Forgings, Rolled Rings, and Forging Stock 2.3Cu 1.6Mg 1.1Fe 1.0Ni 0.18Si 0.07Ti (2618-T61) Solution and Precipitation Heat Treated
SAE AMS4172F-2013 Aluminum Alloy, Extrusions 1.0Mg 0.60Si 0.28Cu 0.20Cr (6061-T4511 or T4510) Solution Heat Treated and Stress Relieved by Stretching
SAE AMS4313D-2010 Aluminum Alloy, Rolled or Forged Rings 6.3Cu 0.30Mn 0.18Zr 0.10V 0.06Ti (2219-T351, 2219-T352) Solution Heat Treated and Mechanically Stress Relieved
SAE AMS4045J-2007 Aluminum Alloy Sheet and Plate 5.6Zn 2.5Mg 1.6Cu 0.23Cr 7075: (-T6Sheet, -T651 Plate) Solution and Precipitation Heat Treated
SAE AMS4027N-2008 Aluminum Alloy, Sheet and Plate 1.0Mg 0.60Si 0.28Cu 0.20Cr (6061; -T6 Sheet, -T651 Plate) Solution and Precipitation Heat Treated
SAE AMS4168J-2003 Aluminum Alloy, Extrusions 5.6Zn 2.5Mg 1.6Cu 0.23Cr (7075-T6510) Solution Heat Treated, Stress Relieved by Stretching, and Precipitation Heat Treated, Unstraightened
SAE AMS5874C-2007 Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 29Fe - 22Cr - 21Ni - 18.5Co - 3.2Mo - 2.8W - 0.78Ta - 0.30Al - 0.05Zr - 0.05La - 0.20N Solution Heat Treated UNS R30556
SAE AMS4459A-2013 Aluminum Alloy, Extrusion 2.7Cu 1.8Li 0.7Zn 0.3Mn 0.3Mg 0.08Zr (2099-T81) Solution Heat Treated, Stress Relived by Stretching 1 to 3% and Aged
SAE AMS4132E-2000 Aluminum Alloy, Die and Hand Forgings, Rolled Rings, and Forging Stock 2.3Cu 1.6Mg 1.1Fe 1.0Ni 0.18Si 0.07Ti (2618-T61) Solution and Precipitation Heat Treated
SAE AMS4128D-2007 Aluminum Alloy Bars, Rolled or Cold Finished 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T451) Solution Heat Treated and Stress Relieved by Stretching UNS A96061
SAE AMS4173E-2003 Aluminum Alloy, Extrusions 1.0Mg 0.60Si 0.30Cu 0.20Cr (6061-T6511) Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Precipitation Heat Treated
SAE AMS4983D-2007 Titanium Alloy, Forgings 10V - 2Fe - 3Al Consumable Electrode Melted, Single-Step Solution Heat Treated and Aged 180 ksi (1241 MPa) Tensile Strength
SAE AMS4984D-2007 Titanium Alloy Forgings 10V - 2Fe - 3Al Consumable Electrode Melted, Solution Heat Treated and Aged 173 ksi (1193 MPa) Tensile Strength UNS R56410
SAE AMS4416-2008 Aluminum Alloy, Extruded Profiles (2196-T8511) 2.9Cu-1.7Li-0.4Mg-0.4Ag-0.10Zr Solution Heat Treated, Stress Relieved by Stretching and Artificially Aged
SAE AMS4416A-2012 Aluminum Alloy, Extruded Profiles (2196-T8511) 2.9Cu 1.7Li 0.4Ag 0.10Zr Solution Heat Treated, Stress Relieved by Stretching and Artificially Aged
SAE AMS4169K-2003 Aluminum Alloy, Extrusions 5.6Zn 2.5Mg 1.6Cu 0.23Cr (7075-T6511) Solution Heat Treated, Stress Relieved by Stretching, Straightened and Precipitation Heat Treated
SAE AMS5892B-2008 Alloy, Sheet and Strip 42Fe 37.5Ni 14Co 4.8Cb (Nb) 1.6Ti Solution Heat Treated, Precipitation Hardenable Multiple Melted, High Temperature, Low Expansion
SAE AMS4122K-2007 Aluminum Alloy Bars, Rods, and Wire Rolled or Cold Finished, and Rings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6) Solution and Precipitation Heat Treated UNS A97075
SAE AMS4986C-2007 Titanium Alloy, Forgings 10V - 2Fe - 3Al Consumable Electrode Melted, Single-Step Solution Heat Treated and Overaged 160 ksi (1103 MPa) Tensile Strength
SAE AMS4987C-2007 Titanium Alloy, Forgings 10V - 2Fe - 3AI Consumable Electrode Melted, Single Solution Heat Treated and Overaged 140 ksi (965 MPa) Tensile Strength
SAE AMS5873E-2007 Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 65Ni - 15.8Cr - 15.2Mo - 0.30AI - 0.05La Consumable Electrode Remelted, Solution Heat Treated UNS N06635
SAE AMS4613-2011 Aluminum Alloy, Sheet and Plate 6.3Cu 0.30Mn 0.06Ti 0.10V 0.18Zr Solution Heat Treated, Cold Worked (8%) and Precipitation Heat Treated (2219-T87)
SAE AMS4312D-2008 Aluminum Alloy, Rolled or Forged Rings 1.0Mg-0.60Si-0.28Cu-0.20Cr (6061-T651, 6061-T652) Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat Treated
SAE AMS4095C-2004 Aluminum Alloy, Alclad Sheet and Plate 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti Alclad 2219-T31; Sheet, Solution Heat Treated and Cold Worked Alclad 2219-T351; Plate, Solution Heat Treated and Stress Relieved UNS A82219
SAE AMS5758H-2008 Alloy, Corrosion-Resistant, Bars 20Cr 35Ni 35Co 10Mo Vacuum Induction Plus Consumable Electrode Vacuum Remelted Solution Heat Treated for Work Strengthening
SAE AMS5758J-2014 Alloy, Corrosion-Resistant, Bars, 20Cr - 35Ni - 35Co - 10Mo, Vacuum Induction Plus Consumable Electrode Vacuum Remelted, Solution Heat Treated for Work Strengthening
SAE AMS4469-2013 Aluminum Alloy Tubing, Seamless, Drawn 1.8 Cu 1.0 Mg 0.8 Si 0.20 Cr Solution Heat Treated, Stress Relieved by Stretching, and Aged (2013-T4511)
SAE AMS4132F-2008 Aluminum Alloy, Die and Hand Forgings, Rolled Rings, and Forging Stock 2.3Cu 1.6Mg 1.1Fe 1.0Ni 0.18Si 0.07Ti (2618-T61) Solution and Precipitation Heat Treated
SAE AMS5399D-2006 Nickel Alloy, Corrosion and Heat Resistant, Investment Castings 52Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti - 1.6Al - 0.006B Vacuum-Melted, Vacuum-Cast, Solution Heat Treated
SAE AMS5383E-2007 Nickel Alloy, Corrosion and Heat-Resistant, Investment Castings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb(Nb) - 0.90Ti - 0.60Al - 18Fe Vacuum Melted Homogenization and Solution Heat Treated UNS N07718
SAE AMS4326-2004 Aluminum Alloy, 2013, Extruded Bar, Rod, and Profiles 1.0 Mg - 0.80 Si - 1.8 Cu - 0.20 Cr (2013 -T6511) Solution Heat Treated, Stress-Relieved by Stretching, and Aged UNS A92013
SAE AMS4311E-2007 Aluminum Alloy, Rolled or Forged Rings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T7351, 7075-T7352) Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat Treated UNS A97075
SAE AMS4310E-2008 Aluminum Alloy, Rolled or Forged Rings, 5.6Zn-2.5Mg-1.6Cu-0.23Cr (7075-T651, 7075-T652) Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat Treated
SAE AMS5582F-2013 Nickel Alloy, Corrosion and Heat Resistant, Seamless Tubing, 72Ni 15.5Cr 0.95Cb (Nb) 2.5Ti 0.70Al 7.0Fe, Solution Heat Treated, Precipitation Hardenable to 155 ksi (1069 MPa) Tensile Strength
SAE AMS5709H-2008 Nickel Alloy, Corrosion and Heat-Resistant, Bars and Forgings 58Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted 1975 °F (1079 °C) Solution, Stabilization, and Precipitation Heat Treated UNS N
SAE AMS5713J-2007 Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings 53Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti - 1.6A1 - 0.006B Vacuum Melted, Solution and Precipitation Heat Treated UNS N07041
SAE AMS5704J-2008 Nickel Alloy, Corrosion and Heat Resistant, Forgings 57Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted 1825 to 1900 Degrees F (996 to 1038 Degrees C) Solution, Stabilization, and Precipitatio
SAE AMS4154P-2011 Aluminum Alloy, Extrusions 5.6Zn 2.5Mg 1.6Cu 0.23Cr (7075-T6, 7075-T6510, 7075-T6511) Solution Heat Treated, Stress Relieved by Stretching when Required and Precipitation Heat Treated
SAE AMS4173F-2013 Aluminum Alloy, Extrusions 1.0Mg 0.60Si 0.30Cu 0.20Cr (6061-T6511 pr T6510) Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Precipitation Heat Treated
SAE AMS4296B-2007 Aluminum Alloy, Alclad Sheet and Plate 4.3Cu - 1.4Mg - 0.60Mn (Alclad 2524-T3) Solution Heat Treated and Cold Worked UNS A82524
SAE AMS4094C-2004 (R) Aluminum Alloy, Sheet and Plate, Alclad 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti Alclad 2219-T81 Sheet Solution Heat Treated, Cold Worked, and Precipitation Heat Treated Alclad 2219-T851 Plate Solution Heat Treated, Stress Relieved, and Precipitation
SAE AMS5668J-2007 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 7.0Fe - 2.5Ti - 1.0Cb (Nb) - 0.70Al 2100 °F (1149 °C) Solution and Precipitation Heat Treated
SAE AMS5844G-2008 Alloy, Corrosion-Resistant, Round Bars 20Cr 35Ni 35Co 10Mo Vacuum Induction Plus Vacuum Consumable Electrode Vacuum Remelted Solution Heat Treated and Work Strengthened
SAE AMS5951-2010 Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 57Ni - 20Cr - 10Co - 8.5Mo - 2.1Ti - 1.5Al - 0.005B Vacuum Induction and Consumable Electrode Melted, Solution Heat Treated Precipitation Heat Treatable
SAE AMS5845H-2008 Alloy, Corrosion-Resistant, Round Bars 20Cr 35Ni 35Co 10Mo Vacuum Induction Plus Consumable Electrode Vacuum Remelted Solution Heat Treated, Work Strengthened, and Aged
SAE AMS5846C-2011 Alloy, Corrosion and Heat Resistant, Bars and Forgings 53Ni 15Cr 18.5Co 5.0Mo 3.2Ti 4.2Al 0.03B, Double Vacuum Melted, Solution, Stabilization, and Precipitation Heat Treated
SAE AMS5844H-2014 Alloy, Corrosion-Resistant, Round Bars, 20Cr - 35Ni - 35Co - 10Mo, Vacuum Induction Plus Consumable Electrode Vacuum Remelted, Solution Heat Treated and Work Strengthened
SAE AMS5845J-2014 Alloy, Corrosion-Resistant, Round Bars 20Cr - 35Ni - 35Co - 10Mo Vacuum Induction Plus Consumable Electrode Vacuum Remelted Solution Heat Treated, Work Strengthened, and Aged
SAE AMS4124E-2012 Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 5.6Zn 2.5Mg 1.6Cu 0.23Cr (7075-T73, T7351), Solution Heat Treated, Stress Relieved by Stretching, and Overaged
SAE AMS4287A-2007 Aluminum Alloy, Extrusion 2.7 Cu - 1.8 Li - 0.7 Zn - 0.3 Mn - 0.3 Mg - 0.08 Zr (2099-T83) Solution Heat Treated, Stress Relieved by Stretching 1% to 4% and Aged UNS A92099
SAE AMS5589E-2007 Nickel Alloy, Corrosion and Heat-Resistant, Seamless Tubing 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode Remelted or Vacuum Induction Melted 1775 °F (968 °C) Solution Heat Treated Composition similar to UNS N07718

SAE - SAE International, How does the alloy dissolve

SAE AMS4222-1942 Aluminum Alloy Castings (Sand) Copper Nickel Magnesium (Solution and Stabilized)
SAE AMS4194E-2018 Aluminum Alloy@ Sheet and Plate@ Alclad 4.4Cu - 1.5Mg - 0.60Mn (2024 -T361 Sheet/Plate with 1?% Alclad) Solution Heat Treated@ 6% Cold Worked and Naturally Aged (UNS A82024)
SAE AMS5951A-2017 Nickel Alloy@ Corrosion and Heat-Resistant@ Sheet@ Strip@ and Plate 57Ni - 20Cr - 10Co - 8.5Mo - 2.1Ti - 1.5Al - 0.005B Vacuum Induction and Consumable Electrode Melted@ Solution Heat Treated Precipitation Heat Treatable (UNS N07208)

British Standards Institution (BSI), How does the alloy dissolve

BS EN ISO 11846:1996 Corrosion of metals and alloys - Determination of resistance to intergranular corrosion of solution heat- treatable aluminium alloys
BS 3L 63:1971 Specification for tube of aluminium-copper-mangesium-silicon-manganese alloy (solution treated and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
BS EN 4379:2007 Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) - Solution treated, forging De 200 mm
BS 2L 169:2002 Ingots (as cast) and castings (solution treated and artificially aged) of aluminium-silicon-magnesium alloy (Si 7, Mg 0. 6)
BS EN 3459:2010 Aerospace series - Titanium alloy TI-P63001 (Ti-4Al-4Mo-2Sn) - Solution treated and aged - Plate - 6 mm a 50 mm
BS 2L 98:1971 Specification for plate of aluminium-copper-magnesium-manganese alloy (solution treated and aged at room temperature: not controlled stretched) (Cu 4.4, Mg 1.5, Mn 0.6)
BS 2L 77:1971 Specification for forging stock and forgings of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
BS 2L 95:1971 Specification for plate of aluminium-zinc-magnesium-copper-chromium alloy (solution treated, controlled stretched and precipitation treated) (Zn 5.8, Mg 2.5, Cu 1.6, Cr 0.15)
BS 7455-1:1991 Analysis of nickel alloys by flame atomic absorption spectrometry - General requirements and sample dissolution
BS EN 4382:2007 Aerospace series. Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb). Solution treated. Seamless tubes. For hydraulic application. D 50 mm, a 3 mm
BS EN 4376:2016 Aerospace series. Heat resisting alloy NiCr19Fe19Nb5Mo3 (2.4668) solution treated and precipitation treated. Bar and section, De 200 mm
BS EN 4382:2006 Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) - Solution treated - Seamless tubes - For hydraulic application - D ≤ 50 mm, a ≤ 3 mm
BS 2L 93:1971 Specification for plate of aluminium-copper-magnesium-silicon-manganese alloy (solution treated, controlled stretched and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
BS L 103:1971 Specification for forging stock and forgings of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0. 8)
BS 2L 85:1971 Specification for forging stock, bars, extruded sections and forgings of aluminium-copper-silicon-magnesium alloy (solution treated and precipitation treated) (Cu 1.5, Si 1, Mg 0.8)
BS EN 4318:2007 Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Solution treated and precipitation treated, bar and section De ≤ 100 mm, Rm ≥ 960 MPa
BS EN 4315:2007 Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Solution treated and precipitation treated, bar and section a or D ≤ 100 mm, Rm ≥ 900 MPa
BS 2L 83:1971 Specification for forging stock, bars, extruded sections and forgings of aluminium-copper-nickel-magnesium-iron-silicon alloy (solution treated and precipitation treated) (Cu 2, Ni 1, Mg 1, Si 0.9, Fe 0.9)
BS L 158:1978 Specification for close toleranced sheet and strip of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0. 8)
BS L 164:1978 Specification for sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0. 8)
BS EN 10355:2013 Chemical analysis of ferrous materials. Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels. Determination of Si, Mn, P, Cu, Ni, Cr, Mo and Sn, following dissolution with nitric and sulphuric acids [Routi
BS 7L 37:1989 Specification for wire for solid cold-forged rivets of aluminium-copper-magnesium-silicon-manganese alloy (for use in the solution treated and naturally aged condition) (not exceeding 10 mm diameter) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8) (2014A)
BS 7L 37:1990 Specification for wire for solid cold-forged rivets of aluminium-copper-magnesium-silicon-manganese alloy (for use in the solution treated and naturally aged condition) (not exceeding 10 mm diameter) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8) (2014A)

RO-ASRO, How does the alloy dissolve

STAS 11985-1985 WOOL Oetcrmination ol solubility index in permethanoic acid-ammonia
STAS SR ISO 7530-1:1995 Nickel alloys. Flame atomic absorption spectrometric analysis. Part 1: General requirements and sample dissolution

Association Francaise de Normalisation, How does the alloy dissolve

NF A06-701:1967 Chemical analysis of copper and copper alloys. Dissolving electrolytic determination of copper lead separation.
NF A95-482:1993 Hardmetals. Determination of insoluble (free) carbon content. Gravimetric method.
NF L10-713*NF EN 4379:2008 Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) - Solution treated, forging De < or = 200 mm
NF L11-003*NF EN 4382:2007 Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) - Solution treated - Seamless tubes - For hydraulic application - D < or = 50 mm, a < or = 3 mm
NF A08-901:1991 Nickel alloys. Flame atomic absorption spectrometric analysis. Part 1 : general requirements and sample dissolution.
NF EN 4573:2020 Série aérospatiale - Alliage résistant à chaud X12CrNiCoMoW21-20 - Mis en solution et précipité - Barres et profilés - De inférieur ou égal à 100 mm
NF A06-330*NF EN 10355:2013 Chemical analysis of ferrous materials - Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels - Determination of Si, Mn, P, Cu, Ni, Cr, Mo and Sn, following dissolution with nitric and sulphuric acids (Rou
NF L10-715*NF EN 4318:2008 Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Solution treated and precipitation treated, bar and section De < or = 100 mm, Rm > or = 960 MPa
NF L10-717*NF EN 4315:2008 Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Solution treated and precipitation treated, bar and section a or D < or = 100 mm, Rm > or = 900 MPa
NF L10-812*NF EN 3459:2010 Aerospace series - Titanium alloy TI-P63001 (Ti-4AI-4Mo-2Sn) - Solution treated and aged - Plate - 6 mm < a < or = 50 mm.
NF L10-516*NF EN 3638:2007 Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Consumable electrode remelted - Solution and precipitation treated - Sheet, strip and plate - 0,5 mm < or = a < or = 10 mm

International Organization for Standardization (ISO), How does the alloy dissolve

ISO 11846:1995 Corrosion of metals and alloys - Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys
ISO 11437-1:1994 Nickel alloys - Determination of trace-element content by electrothermal atomic absorption spectrometric method - Part 1: General requirements and sample dissolution

European Committee for Standardization (CEN), How does the alloy dissolve

EN ISO 11846:2008 Corrosion of metals and alloys - Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys
EN 4379:2007 Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) - Solution treated, forging De less than or equal to 200 mm
EN 3459:2010 Aerospace series - Titanium alloy TI-P63001 (Ti-4Al-4Mo-2Sn) - Solution treated and aged - Plate - 6 mm < a <= 50 mm
EN 4382:2006 Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) - Solution treated - Seamless tubes - For hydraulic application - D <= 50 mm, a <= 3 mm
EN 10355:2013 Chemical analysis of ferrous materials - Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels - Determination of Si@ Mn@ P@ Cu@ Ni@ Cr@ Mo and Sn@ following dissolution with nitric and sulphuric acids [Rou
EN 4315:2007 Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Solution treated and precipitation treated, bar and section a or D <= 100 mm Rm a >= 900 MPa
EN 4318:2007 Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Solution treated and precipitation treated, bar and section De <= 100 mm, Rm >= 960 MPa

German Institute for Standardization, How does the alloy dissolve

DIN EN ISO 11846:2008 Corrosion of metals and alloys - Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys (ISO 11846:1995); German version EN ISO 11846:2008
DIN ISO 4883:1991 Hardmetals; determination of contents of metallic elements by X-ray fluorescence; solution method; identical with ISO 4883:1978
DIN EN 4379:2008 Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) - Solution treated, forging D<(Index)e> 200 mm; German and English version EN 4379:2007
DIN EN ISO 3908:2010 Hardmetals - Determination of insoluble (free) carbon - Gravimetric method (ISO 3908:2009); German version EN ISO 3908:2009
DIN EN 10355:2013-11 Chemical analysis of ferrous materials - Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels - Determination of Si, Mn, P, Cu, Ni, Cr, Mo and Sn, following dissolution with nitric and sulphuric acids [...
DIN EN 4315:2008 Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Solution treated and precipitation treated, bar and section a or D 100 mm, R<(Index)m> 900 MPa; German and English version EN 4315:2007
DIN EN 10355:2013 Chemical analysis of ferrous materials - Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels - Determination of Si, Mn, P, Cu, Ni, Cr, Mo and Sn, following dissolution with nitric and sulphuric acids [Rou
DIN EN 3638:2007 Aerospace series - Heat resisting alloy FE-PA2601(X6NiCrTiMoV26-15) - Consumable electrode remelted - Solution and precipitation treated - Sheet, strip and plate - 0,5 mm a 10 mm; German and English version EN 3638:2007

Korean Agency for Technology and Standards (KATS), How does the alloy dissolve

KS D ISO 4883:2003 Hardmetals－Determination of contents of metallic elements by X－ray fluorescence－Solution method
KS D ISO 11846:2003 Corrosion of metals and alloys－Determination of resistance to intergranular corrosion of solution heat－treatable aluminium alloys
KS D ISO 7530-1-2012(2017) Nickel alloys－Flame atomic absorption spectrometric analysis－Part 1：General requirements and sample dissolution
KS D ISO 7530-1:2012 Nickel alloys－Flame atomic absorption spectrometric analysis－Part 1：General requirements and sample dissolution
KS D ISO 11437-1-2012(2022) Nickel alloys－Determination of trace-element content by electrothermal atomic absorption spectrometric method－Part 1：General requirements and sample dissolution
KS D ISO 11437-1-2012(2017) Nickel alloys－Determination of trace-element content by electrothermal atomic absorption spectrometric method－Part 1：General requirements and sample dissolution
KS D ISO 11437-1:2012 Nickel alloys-Determination of trace-element content by electrothermal atomic absorption spectrometric method-Part 1:General requirements and sample dissolution

未注明发布机构, How does the alloy dissolve

SAE AMS4446D-2018 Magnesium Alloy, Sand Castings 8.7Al - 0.70Zn - 0.26Mn (AZ91E-T6) Solution and Precipitation Heat Treated UNS M11919
SAE AMS4429B-2019 Magnesium Alloy Castings, Sand 2.8Nd 1.4Gd 0.4Zn 0.6Zr (EV31A - T6), Solution and Precipitation Heat Treated

YU-JUS, How does the alloy dissolve

JUS ISO 4883:1991 Hardmetals. Determination of contents of metallic elements by X-ray fluorescence. solution method

HU-MSZT, How does the alloy dissolve

MI 4262/3-1984

国家质量监督检验检疫总局, How does the alloy dissolve

SN/T 4966-2017 ChemicalsMethods for dissolution and transformation of metals and metal compounds in aquatic media

American Society for Testing and Materials (ASTM), How does the alloy dissolve

ASTM B947-06 Standard Practice for Hot Rolling Mill Solution Heat Treatment for Aluminum Alloy Plate
ASTM B947-14 Standard Practice for Hot Rolling Mill Solution Heat Treatment for Aluminum Alloy Plate
ASTM B947-06(2013) Standard Practice for Hot Rolling Mill Solution Heat Treatment for Aluminum Alloy Plate
ASTM A1008/A1008M-11 Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable
ASTM A1008/A1008M-09 Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable
ASTM A1008/A1008M-10 Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable
ASTM A1008/A1008M-12a Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable
ASTM A1008/A1008M-12 Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable

RU-GOST R, How does the alloy dissolve

GOST R ISO 7530-1-2016 Nickel alloys. Flame atomic absorption spectrometric analysis. Part 1. General requirements and sample dissolution

CZ-CSN, How does the alloy dissolve

CSN ISO 7530-1:1994 Nickel alloys. Flame atomic absorption spectrometric analysis. Part 1: General requirements and sample dissolution

国家市场监督管理总局、中国国家标准化管理委员会, How does the alloy dissolve

GB/T 36700.8-2018 Chemicals—Guidance on hazard classification to the aquatic environment—Part 8:Guidance on transformation/dissolution of metals and metal compounds in aqueous media

European Association of Aerospace Industries, How does the alloy dissolve

AECMA PREN 2197-1998 Heat Resisting Nickel Base Alloy NI-P102-HT Solution Treated and Precipitation Treated Forgings Aerospace Series Edition 2 [Refer To: ASD-STAN PREN 2197]
AECMA PREN 2199-1998 Aerospace Series Heat Resisting Alloy NI-PH1303 (NiCo20Cr20Mo5Ti2AI) Solution Treated and Precipitation Treated Bar and Section De Less Than or Equal to 200 mm Edition P 1

Danish Standards Foundation, How does the alloy dissolve

DS/EN 10355:2013 Chemical analysis of ferrous materials - Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels - Determination of Si, Mn, P, Cu, Ni, Cr, Mo and Sn, following dissolution with nitric and sulphuric acids [Rou

Lithuanian Standards Office , How does the alloy dissolve

LST EN 10355-2013 Chemical analysis of ferrous materials - Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels - Determination of Si, Mn, P, Cu, Ni, Cr, Mo and Sn, following dissolution with nitric and sulphuric acids [Rou

AENOR, How does the alloy dissolve

UNE-EN 10355:2014 Chemical analysis of ferrous materials - Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels - Determination of Si, Mn, P, Cu, Ni, Cr, Mo and Sn, following dissolution with nitric and sulphuric acids [Rou

KR-KS, How does the alloy dissolve

KS D ISO 11438-1-2012 Ferronickel－Determination of trace-element content by electrothermal atomic absorption spectrometric method－Part 1：General requirement and sample dissolution