ZH
RU
ES

Smoke Density Chamber/Smoke Density Test Chamber

Smoke Density Chamber/Smoke Density Test Chamber, Total:184 items.

In the international standard classification, Smoke Density Chamber/Smoke Density Test Chamber involves: Protection against fire, Plastics, Tobacco, tobacco products and related equipment, Products of the chemical industry, Air quality, Diagnostic, maintenance and test equipment, TESTING, Fuels, Shipbuilding and marine structures in general, Coals, Analytical chemistry, Construction materials, Electrical engineering in general, Electrical wires and cables, Optics and optical measurements, Measurement of volume, mass, density, viscosity, Fruits. Vegetables.

British Standards Institution (BSI), Smoke Density Chamber/Smoke Density Test Chamber

BS EN ISO 5659-2:2013 Plastics. Smoke generation. Determination of optical density by a single-chamber test
BS EN ISO 5659-2:2012 Plastics. Smoke generation. Determination of optical density by a single-chamber test
BS EN ISO 5659-2:2017 Plastics. Smoke generation. Determination of optical density by a single-chamber test
BS ISO 5659-2:1995 Plastics. Smoke generation. Determination of specific optical density
BS EN 61034-1:2005+A2:2020 Measurement of smoke density of cables burning under defined conditions - Test apparatus
BS EN 61034-2:2005+A2:2020 Measurement of smoke density of cables burning under defined conditions - Test procedure and requirements
BS EN 61034-2:2005+A1:2013 Measurement of smoke density of cables burning under defined conditions. Test procedure and requirements
BS 6401:1983 Method for measurement, in the laboratory, of the specific optical density of smoke generated by materials
BS EN 61034-2:2005 Measurement of smoke density of cables burning under defined conditions - Test procedure and requirements
BS EN 61034-1:2006 Measurement of smoke density of cables burning under defined conditions. Test apparatus
BS EN 61034-1:2005 Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus
BS EN ISO 5659-1:1996 Plastics. Smoke generation. Guidance on optical-density testing
BS ISO/TR 5659-3:1999 Plastics - Smoke generation - Determination of optical density by a dynamic flow method
BS ISO/TR 5659-3:2000 Plastics - Smoke generation - Determination of optical density by a dynamic flow method

Professional Standard - Tobacco, Smoke Density Chamber/Smoke Density Test Chamber

YC/T 236-2008 Tobacco and tobacco products.Nondestructive detection of strip density variety ratio in case.Ionizing radiation method
YC/T 476-2013 Determination of the density of cut tobacco in cigarette.Microwave method
YC/T 473-2013 Determination of apparent density,true density and inner pore volume of cut tobacco
YC/T 145.2-1998 Tobacco flavor.Determination of relative density
YC/T 145.2-2012 Tobacco flavor.Determination of relative density
YC/T 140-1998 Cigarette.Determination of package seal.Charge method
YC/T 169.1-2002 Testing physical and chemical characteristics of tow for cigarette----Part 1: Total line density
YC/T 169.2-2002 Testing physical and chemical characteristics of tow for cigarette----Part 2: Linear density of filament
YC/T 169.1-2009 Determination of physical and chemical characteristics of tow for cigarette.Part 1:Total line density
YC/T 169.2-2009 Determination of physical and chemical characteristics of tow for cigarette.Part 2:Linear density of filament

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Smoke Density Chamber/Smoke Density Test Chamber

GB/T 31786-2015 Tobacco and tobacco products.Non-destructive determination of strips density variation ratio in case.Ionizing radiation method
GB/T 15814.2-1995 Reagent of fireworks and firecracker--Measurement of density
GB/T 8323.2-2008 Plastic.Smoke generation.Part 2:Determination of optical density by a single-chamber test
GB/T 8323.1-2008 Plastic.Smoke generation.Part 1:Guidance on optical-denstity testing
GB/T 8323-1987 Test method for flammability of plastics--Smoke density test
GB 8323-1987 Test method for flammability of plastics－Smoke density test
GB/T 10671-1989 Test method for specific optical density of smoke generated by solid materials
GB/T 10671-2023 Specific optical density test method for smoke production from solid materials
GB/T 10671-2008 Test method for specific optical density of smoke generated by solid materials
GB/T 8627-2007 Test method for density of smoke from the burning or decomposition of building materials
GB/T 8627-1999 Test method for density of smoke from the burning or decomposition of building materials

Military Standard of the People's Republic of China-General Armament Department, Smoke Density Chamber/Smoke Density Test Chamber

GJB/J 5230-2003 Calibration procedures for smoke density tester
GJB 8683.2-2015 Test methods for physical parameters of pyrotechnics Part 2: Density determination density bottle method
GJB 8683.5-2015 Test methods for physical parameters of pyrotechnics Part 5: Determination of bulk density using glass measuring cylinder method
GJB 8683.4-2015 Test methods for physical parameters of pyrotechnics Part 4: Standard graduated cylinder method for determination of bulk density

CZ-CSN, Smoke Density Chamber/Smoke Density Test Chamber

CSN 64 0150-1989 Determination of the smoke optical ensity
CSN 66 8102 Cast.2-1997
CSN 66 8102 Cast.2-1989 Smokeless powders. Methods of testing. Determination of density
CSN 66 8102 Cast.3-1978 Smokeless powders. Methods of testing. Determination of bulk density

Korean Agency for Technology and Standards (KATS), Smoke Density Chamber/Smoke Density Test Chamber

KS R ISO 11614:2001 Reciprocating internal combustion compression-ignition engines- Apparatus for measurement of the opacity and for determination of the light absorption coefficient of exhaust gas
KS M 3047-2008 Methods for the analysis of evolved gases concentration by burning of plastics
KS M ISO 5659-1:2002 Plastics－Somke generation－Part 1：Guidance on optical－density testing
KS M ISO 5659-2:2020 Plastics — Smoke generation —Part 2: Determination of optical density by a single-chamber test
KS M 3047-1993 Method for Measuring Smoke Density and Concentration of Gases Evolved by Incineration or Decomposition of Plastics
KS C IEC 61034-1:2020 Measurement of smoke density of cables burning under defined conditions — Part 1: Test apparatus
KS M ISO 5659-2:2012 Plastics-Smoke generation-Part 2:Determination of optical density by a single-chamber test

Professional Standard - Civil Aviation, Smoke Density Chamber/Smoke Density Test Chamber

MH/T 6040-2017 Test method for smoke density generated by aircraft materials
MH/T 6040-2006 Test method for smoke density generated by aircraft materials

RO-ASRO, Smoke Density Chamber/Smoke Density Test Chamber

STAS 12457-1986 AIR Determination of aersols activity density
STAS 5628-1973 BROWN COAL AND HARD COAL COKE AND SEMICOKE Determination of density, apparent density and porosity

American Society for Testing and Materials (ASTM), Smoke Density Chamber/Smoke Density Test Chamber

ASTM D2156-80(1988)e1 Standard Test Method for Smoke Density in Flue Gases from Burning Distillate Fuels
ASTM D2156-09(2018) Standard Test Method for Smoke Density in Flue Gases from Burning Distillate Fuels
ASTM D2156-65(1970) Standard Test Method for Smoke Density In The Flue Gases From Distillate Fuels
ASTM D2156-94(2003) Standard Test Method for Smoke Density in Flue Gases from Burning Distillate Fuels
ASTM D2156-94(1999) Standard Test Method for Smoke Density in Flue Gases from Burning Distillate Fuels
ASTM D2156-08 Standard Test Method for Smoke Density in Flue Gases from Burning Distillate Fuels
ASTM D291/D291M-20 Standard Test Method for Bulk Density of Crushed Bituminous Coal
ASTM D2156-09(2013) Standard Test Method for Smoke Density in Flue Gases from Burning Distillate Fuels
ASTM D2156-09 Standard Test Method for Smoke Density in Flue Gases from Burning Distillate Fuels
ASTM D2843-10 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics
ASTM D2157-18 Standard Test Method for Effect of Air Supply on Smoke Density in Flue Gases from Burning Distillate Fuels
ASTM E662-18 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-21a Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-05 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-09 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-17a Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-17 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-19 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM D2843-19 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics
ASTM E662-13 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-12 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-21ae1 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-14 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-15a Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-13a Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-13b Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-12a Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-03e2 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-03e1 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-03 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-01 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-97 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-21 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-06e1 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM D2843-22 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics
ASTM D2157-94(2003) Standard Test Method for Effect of Air Supply on Smoke Density in Flue Gases From Burning Distillate Fuels
ASTM D2843-99(2004)e1 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics
ASTM E662-06 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM D2843-99 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics
ASTM D2843-99(2004) Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics
ASTM E662-15 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-13c Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-13d Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Smoke Density Chamber/Smoke Density Test Chamber

GJB 5382.2-2005 Test methods of physical parameter for pyrotechnic. Part 2: Determination of density. Pyknometer method
GJB 5382.4-2005 Test methods of physical parameter for pyrotechnic. Part 4: Determination of bulk density. Standard measuring cylinder method
GJB 5382.5-2005 Test methods of physical parameter for pyrotechnic. Part 5: Determination of bulk density. Glass measuring cylinder method

International Organization for Standardization (ISO), Smoke Density Chamber/Smoke Density Test Chamber

ISO/CD 5659:2023 Plastics — Smoke generation —Determination of optical density by a single-chamber test
ISO 5659-1:1996 Plastics - Smoke generation - Part 1: Guidance on optical-densitiy testing
ISO 5659-2:2006 Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test
ISO 5659-2:2012 Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test
ISO 5659-2:2017 Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test
ISO 12030:2010 Tobacco and tobacco products - Non-destructive determination of strips density variation ratio in case - Ionizing radiation method
ISO/TR 5659-3:1999 Plastics - Smoke generation - Part 3: Determination of optical density by a dynamic-flow method
ISO 5659-2:1994 Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test

未注明发布机构, Smoke Density Chamber/Smoke Density Test Chamber

DIN EN ISO 5659-1:1999 Plastica — Smoke generation — Part 1 : Guidance on optical-density testing
ISO/IEC 12030:2010 Tobacco and tobacco products — Non- destructive determination of strips density variation ratio in case — Ionizing radiation method
BS 7622-1:1993(1999) Measurement ofsmoke density ofelectric cables burning under defined conditions — Part 1 : Test apparatus —
BS 7622-2:1993(1999) Measurement ofsmoke density ofelectric cables burning under defined conditions — Part 2 : Test procedure and requirements

RU-GOST R, Smoke Density Chamber/Smoke Density Test Chamber

GOST ISO 1013-1995 Coke determination of bulk density in a large container
GOST 10220-1982 Coke. Methods for the determination of true relative density, annarent relative density and porosity
GOST 25927-1995 Coke. Determination of bulk density in a small container
GOST 25927-1983 Coal coke. Method of determination of the bulk density in a small container
GOST R IEC 61034-1-2005 Measurement of smoke density of cables burning under defined conditions. Part 1. Test apparatus
GOST R IEC 61034-2-2005 Measurement of smoke density of cables burning under defined conditions. Part 2. Test procedure and requirements

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Smoke Density Chamber/Smoke Density Test Chamber

PREN 2825-1990 Aerospace Series Burning Behaviour@ Determination of Smoke Density and Gas Components in the Smoke of Materials Under the Influence of Radiating Heat and Flames - Determination of Smoke Density

American National Standards Institute （ANSI), Smoke Density Chamber/Smoke Density Test Chamber

ANSI/ASTM D2843:1999 Test Method for Density of Smoke from the Burning or Decomposition of Plastics (08.02)
ANSI/ASTM E662 REV A:2021 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ANSI/ASTM E662a:2013 Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ANSI/ASTM E662b:2013 Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ANSI/ASTM E662c:2013 Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ANSI/NFPA 270-2007 Test Method for Measurement of Smoke Obscuration using a Conical Radiant Source in a Single Closed Chamber

Association Francaise de Normalisation, Smoke Density Chamber/Smoke Density Test Chamber

NF T51-073:1977 Plastics. Reaction to fire.test method to measure the density of smoke.
NF T51-659-2*NF EN ISO 5659-2:2017 Plastics - Smoke generation - Part 2 : Determination of optical density by a single-chamber test
NF EN ISO 5659-2:2017 Plastiques - Production de fumée - Partie 2 : détermination de la densité optique par un essai en enceinte unique
NF T51-659-2:2007 Plastics - Smoke generation - Part 2 : determination of optical density by a single chamber test.
NF C32-073-2:1993 MEASUREMENT OF SMOKE DENSITY OF ELECTRIC CABLES BURNING UNDER DEFINED CONDITIONS. PART 2 : TEST PROCEDURE AND REQUIREMENTS.
NF T51-659-2:2013 Plastics - Smoke generation - Part 2: determination of optical density by a single-chamber test
NF EN 3475-601:2008 Série aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essais - Partie 601 : densité de fumée
NF EN 61034-1/A1:2014 Mesure de la densité de fumées dégagées par des câbles brûlant dans des conditions définies - Partie 1 : appareillage d'essai
NF C32-073-1*NF EN 61034-1:2005 Measurement of smoke density of cables burning under defined conditions - Part 1 : test apparatus
NF C32-073-1:1993 MEASUREMENT OF SMOKE DENSITY OF ELECTRIC CABLES BURNING UNDER DEFINED CONDITIONS. PART 1 : TEST APPARATUS.
NF C32-073-1/A2*NF EN 61034-1/A2:2020 Measurement of smoke density of cables burning under defined conditions - Part 1 : test apparatus
NF C32-073-1/A1*NF EN 61034-1/A1:2014 Measurement of smoke density of cables burning under defined conditions - Part 1 : test apparatus

European Committee for Standardization (CEN), Smoke Density Chamber/Smoke Density Test Chamber

EN ISO 5659-2:1998 Plastics - Smoke Generation - Part 2: Determination of Optical Density by a Single-Chamber Test ISO 5659-2:1994, Including Technical Corrigendum 1:1997
EN ISO 5659-2:2017 Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test
EN ISO 5659-2:2012 Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test
prEN ISO 5659-2 rev Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test
EN ISO 5659-1:1999 Plastics - Smoke Generation - Part 1: Guidance on Optical-Density Testing ISO 5659-1:1996

CEN - European Committee for Standardization, Smoke Density Chamber/Smoke Density Test Chamber

EN ISO 5659-2:2006 Plastics - Smoke Generation - Part 2: Determination of Optical Density by a Single-Chamber Test

Danish Standards Foundation, Smoke Density Chamber/Smoke Density Test Chamber

DS/EN ISO 5659-2:2013 Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test
DS/ISO 12030:2010 Tobacco and tobacco products - Non-destructive determination of strips density variation ratio in case - Ionizing radiation method
DS/EN 61034-1:2006 Measurement of smoke density of cables burning under defined conditions – Part 1: Test apparatus

National Metrological Verification Regulations of the People's Republic of China, Smoke Density Chamber/Smoke Density Test Chamber

JJG(烟草) 07-1998 Verification rules for tobacco fiber tow linear density tester
JJG(烟草) 32-2023
JJG(烟草)32-2023 Verification Regulation of Cigarette Packet Seal Tester—Method of Pumping-water Immersion

Taiwan Provincial Standard of the People's Republic of China, Smoke Density Chamber/Smoke Density Test Chamber

CNS 14818-2004 Method of test for density of smoke generated by solid materials -Specificoptical method of vertical type

German Institute for Standardization, Smoke Density Chamber/Smoke Density Test Chamber

DIN EN ISO 5659-2:2017-11 Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test (ISO 5659-2:2017); German version EN ISO 5659-2:2017
DIN EN 3475-601:2008-11 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 601: Smoke density; German and English version EN 3475-601:2007

ES-UNE, Smoke Density Chamber/Smoke Density Test Chamber

UNE-EN ISO 5659-2:2018 Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test (ISO 5659-2:2017)
UNE-EN 61034-1:2005/A2:2020 Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus
UNE-EN 3475-601:2007 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 601: Smoke density (Endorsed by AENOR in November of 2007.)
UNE-EN 61034-2:2005/A2:2020 Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements

KR-KS, Smoke Density Chamber/Smoke Density Test Chamber

KS M ISO 5659-2-2020 Plastics — Smoke generation —Part 2: Determination of optical density by a single-chamber test
KS C IEC 61034-1-2020 Measurement of smoke density of cables burning under defined conditions — Part 1: Test apparatus

Professional Standard - Aviation, Smoke Density Chamber/Smoke Density Test Chamber

HB 6577-1992 Test method for smoke density of non-metallic materials inside civil aircraft cabin
HB 6577-2014 Test method for smoke density of non-metallic materials inside civil aircraft cabin

YU-JUS, Smoke Density Chamber/Smoke Density Test Chamber

JUS H.B8.015-1981 Sulphuric acid for industrial u se. Determination ofabsolute density. Hydrometer method

Standard Association of Australia （SAA）, Smoke Density Chamber/Smoke Density Test Chamber

AS/NZS IEC 61034.1:2017 Measurement of smoke density of cables burning under defined conditions, Part 1: Test apparatus
AS/NZS IEC 61034.2:2017 Measurement of smoke density of cables burning under defined conditions, Part 2: Test procedure and requirements

Japanese Industrial Standards Committee (JISC), Smoke Density Chamber/Smoke Density Test Chamber

JIS K 7242-2:2008 Plastic -- Smoke generation -- Part 2 : Determination of optical density by a single-chamber test
JIS K 7242-2:2015 Plastics -- Smoke generation -- Part 2: Determination of optical density by a single-chamber test
JIS K 7228:1987 Method for measuring smoke density and concentration of gases evolved by incineration or decomposition of plastics
JIS K 7242-2:1998 Plastics -- Smoke generation -- Part 2: Determination of optical density by a single-chamber test

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Smoke Density Chamber/Smoke Density Test Chamber

ASHRAE AC-02-8-2-2002 Use of Optical Density-Based Measurements as Metrics for Smoke Detectors

International Electrotechnical Commission (IEC), Smoke Density Chamber/Smoke Density Test Chamber

IEC 61034-1:2013 Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus
IEC 61034-1:2019 Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus
IEC 61034-1:2005+AMD1:2013 CSV Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus
IEC 61034-1:2005+AMD1:2013+AMD2:2019 CSV Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus
IEC 61034-2:2019 Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements
IEC 61034-2:2005+AMD1:2013 CSV Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements
IEC 61034-1:1997 Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus
IEC 61034-1:2005/AMD1:2013 Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus
IEC 61034-1:2005 Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus

ZA-SANS, Smoke Density Chamber/Smoke Density Test Chamber

SANS 61034-1:2006 Measurement of smoke density of cables burning under defined conditions Part 1: Test apparatus

AENOR, Smoke Density Chamber/Smoke Density Test Chamber

UNE-EN 61034-1:2005 Measurement of smoke density of cables burning under defined conditions -- Part 1: Test apparatus
UNE-EN ISO 5659-2:2013 Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test (ISO 5659-2:2012)
UNE-EN 61034-1:2005/A1:2014 Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus

Lithuanian Standards Office , Smoke Density Chamber/Smoke Density Test Chamber

LST EN ISO 5659-2:2013 Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test (ISO 5659-2:2012)

European Association of Aerospace Industries, Smoke Density Chamber/Smoke Density Test Chamber

AECMA PREN 3475-601-2001 Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 601: Smoke Density Edition P 1
AECMA PREN 3475-601-2006 Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 601: Smoke Density Edition P 2