ZH
RU
ES

Scratch Hardness Tester

Scratch Hardness Tester, Total:429 items.

In the international standard classification, Scratch Hardness Tester involves: Surface treatment and coating, Construction materials, Non-ferrous metals, Testing of metals, Mechanical testing, Paints and varnishes, Plastics, Graphic technology, Reinforced plastics, Metrology and measurement in general, Structure and structure elements, Linear and angular measurements, Rubber, Non-metalliferous minerals, Ferrous metals, Cutting tools, Pharmaceutics, Glass, Ceramics, Cellular materials, Corrosion of metals, Textile machinery, Paper and board, Powder metallurgy, Vibrations, shock and vibration measurements, Radiation measurements, Seals, glands, Shafts and couplings, Insulating materials, Petroleum, petroleum products and natural gas handling equipment.

CZ-CSN, Scratch Hardness Tester

CSN 72 5126-1987 Determination of scratch hardness of surface accordíng to Mohs
CSN 62 1431-1993 Rubber, plastics and ebonite. Determination of indentation hardness by means of a durometer (Shore hardness)
CSN 72 2348-1983 Testing of caulking compounds for building purposes. Indentation hardness of elastomeric sealants by means of durometer by Shore a
CSN 64 0619-1981 Plastics etermination of hardness by, tlie balí ndenLation method
CSN 64 5440-1981 Determination of hardness y indentation techniques f flexible cellular materials
CSN 25 0264-1976 Diamond indenters for Vickers hardness testing machines
CSN 25 0270-1974 Verification of Rockwell superficial N and T scale hardness testing machines

BE-NBN, Scratch Hardness Tester

NBN-EN 101-1992 Ceramic tiles - Determination of scratch hardness of surface according to Mohs
NBN T 31-002-1976 Vulcanized rubbers - indentation hardness by means of a Shore duro-meter
NBN T 46-003-1977 Flexible cellular materials - Hardness testinq by indentation techni-ques
NBN T 46-003-1983 Polymeric materials, cellular flexible - Détermination of hardness (indentation technique)

Japanese Industrial Standards Committee (JISC), Scratch Hardness Tester

JIS K 7317:2022 Plastics -- Determination of scratch hardness of specialty films
JIS P 8143:2009 Paper -- Determination of stiffness -- Clark stiffness tester method

European Committee for Standardization (CEN), Scratch Hardness Tester

EN ISO 6769:2022 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale (ISO 6769:2022)
EN 15771:2010 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale
EN 101:1984 Ceramic Tiles: Determination of Scratch Hardness of Surface According to Mohs
EN 101:1991 Ceramic Tiles - Determination of Scratch Hardness of Surface According to Mohs
EN ISO 868:1997 Plastics and Ebonite - Determination of Indentation Hardness by Means of a Durometer (Shore Hardness) ISO 868: 1985
prEN 667-1992 Rubber floor coverings; determination of indentation hardness by means of a durometer (Shore A hardness)
EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)
prEN ISO 14577-1 rev Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method
prEN ISO 14577-3 rev Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks
prEN ISO 14577-2 rev Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines
EN ISO 2439:2008 Flexible cellular polymeric materials - Determination of hardness (indentation technique) (ISO 2439:2008)
EN 59:1977 Glass Reinforced Plastics: Measurement of Hardness by Means of a Barcol Impressor
EN ISO 14577-1:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2015)
EN ISO 14577-3:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2015)

International Organization for Standardization (ISO), Scratch Hardness Tester

ISO 6769:2022 Vitreous and porcelain enamels — Determination of surface scratch hardness according to the Mohs scale
ISO 868:1978 Plastics — Determination of indentation hardness by means of a durometer (Shore hardness)
ISO/TS 19278:2019 Plastics — Instrumented micro-indentation test for hardness measurement
ISO 7619:1986 Rubber; Determination of indentation hardness by means of pocket hardness meters
ISO 868:1985 Plastics and ebonite; Determination of indentation hardness by means of a durometer (Shore hardness)
ISO 14577-5:2022 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 5: Linear elastic dynamic instrumented indentation testing (DIIT)
ISO 14577-3:2002 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks
ISO 14577-3:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks
ISO 2039:1973 Plastics and ebonite — Determination of hardness by the ball indentation method
ISO 2039-2:1981 Plastics — Determination of hardness by the ball indentation method — Part 2: Rockwell hardness
ISO/DTS 19096 Metallic materials — Instrumented indentation test for hardness and materials parameters — Evaluation of stress change using indentation force differences
ISO/TS 19096:2023 Metallic materials — Instrumented indentation test for hardness and materials parameters — Evaluation of stress change using indentation force differences
ISO 6441-1:1999 Paints and varnishes - Determination of micro-indentation hardness - Part 1: Knoop hardness by measurement of indentation length
ISO 7619-1:2010 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness)
ISO 6441-2:1999 Paints and varnishes - Determination of micro-indentation hardness - Part 2: Knoop hardness by measurement of indentation depth under load
ISO 48-4:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4: Indentation hardness by durometer method (Shore hardness)
ISO 14577-1:2002 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method
ISO 14577-1:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method
ISO 7619-1:2004 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness)
ISO/CD 14577-1:2023 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 1: Test method
ISO 48-5:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 5: Indentation hardness by IRHD pocket meter method
ISO/CD 14577-3:2023 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 3: Calibration of reference blocks
ISO 2439:1972 Title missing - Legacy paper document
ISO 2439:2008 Flexible cellular polymeric materials - Determination of hardness (indentation technique)
ISO 2039-1:1987 Plastics — Determination of hardness — Part 1: Ball indentation method
ISO 2439:1980 Polymeric materials, cellular flexible; Determination of hardness (indentation technique)
ISO 14577-2:2002 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines
ISO 14577-2:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines
ISO 7619-1:2004/Amd 1:2008 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness); Amendment 1: Precision data
ISO/CD 14577-2:2023 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 2: Verification and calibration of testing machines
ISO 7619-2:2010 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 2: IRHD pocket meter method
ISO 18898:2016 Rubber - Calibration and verification of hardness testers
ISO 18898:2012 Rubber - Calibration and verification of hardness testers
ISO 2439:1997/Cor 1:1998 Flexible cellular polymeric materials - Determination of hardness (indentation technique); Technical Corrigendum 1
ISO 14577-4:2007 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings
ISO 14577-4:2016 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings

RO-ASRO, Scratch Hardness Tester

STAS SR EN 101-1994 Ceramic tiles. Determination of scratch hardness of surface according to Mohs
STAS SR ISO 868:1995 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
STAS 8643-1970 PLASTICS Determination of identation hardness by means of a dnrometer Shore

British Standards Institution (BSI), Scratch Hardness Tester

BS EN 15771:2010 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale
22/30436770 DC BS ISO 6769. Vitreous and porcelain enamels. Determination of surface scratch hardness according to the Mohs scale
BS EN ISO 6769:2022 Tracked Changes. Vitreous and porcelain enamels. Determination of surface scratch hardness according to the Mohs scale
PD ISO/TS 19278:2019 Plastics. Instrumented micro-indentation test for hardness measurement
BS ISO 14577-5:2022 Metallic materials. Instrumented indentation test for hardness and materials parameters - Linear elastic dynamic instrumented indentation testing (DIIT)
BS EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
BS ISO 48-4:2018 Rubber, vulcanized or thermoplastic. Determination of hardness. Indentation hardness by durometer method (Shore hardness)
BS ISO 7619-1:2010 Rubber, vulcanized or thermoplastic. Determination of indentation hardness. Durometer method (Shore hardness)
20/30383255 DC BS ISO 14577-5. Metallic materials. Instrumented indentation test for hardness and materials parameters. Part 5. Linear elastic dynamic instrumented indentation testing (DIIT)
BS ISO 19979:2018 Tracked Changes. Rubber, vulcanized or thermoplastic. Determination of hardness. Indentation hardness by durometer method (Shore hardness)
BS EN ISO 14577-1:2002 Metallic materials. Instrumented indentation test for hardness and materials parameters. Test method
BS EN ISO 14577-1:2015 Metallic materials. Instrumented indentation test for hardness and materials parameters. Test method
BS 903-A57:1997 Physical testing of rubber - Determination of indentation hardness by means of pocket hardness meters
BS EN 59:2016 Glass reinforced plastics. Determination of indentation hardness by means of a Barcol hardness tester
BS EN ISO 14577-3:2002 Metallic materials. Instrumented indentation test for hardness and materials parameters. Calibration of reference blocks
BS EN ISO 14577-3:2015 Metallic materials. Instrumented indentation test for hardness and materials parameters. Calibration of reference blocks
17/30335305 DC BS ISO 7619-1. Rubber, vulcanized or thermoplastic. Determination of indentation hardness. Part 1. Durometer method (Shore hardness). Part 1: Durometer method (Shore hardness)
BS ISO 48-5:2018 Tracked Changes. Rubber, vulcanized or thermoplastic. Determination of hardness. Indentation hardness by IRHD pocket meter method
BS EN ISO 14577-2:2002 Metallic materials. Instrumented indentation test for hardness and materials parameters. Verification and calibration of testing machines
BS EN ISO 14577-2:2015 Metallic materials. Instrumented indentation test for hardness and materials parameters. Verification and calibration of testing machines
BS 3900-E12.2:2000 Methods of test for paints - Determination of Knoop hardness by measurement of the indentation depth
BS EN ISO 2439:2001 Flexible cellular polymeric materials - Determination of hardness (indentation technique)
BS EN ISO 2439:2009 Flexible cellular polymeric materials. Determination of hardness (indentation technique)
BS EN ISO 2439:2008 Flexible cellular polymeric materials - Determination of hardness (indentation technique)
BS DD CEN/TS 1071-7:2003 Advanced technical ceramics. Methods of test for ceramic coatings. Determination of hardness and Young's modulus by instrumented indentation testing
BS EN ISO 14577-4:2007 Metallic materials. Instrumented indentation test for hardness and materials parameters. Test method for metallic and non-metallic coatings
BS 3900-E12.1:2000 Methods of test for paints - Determination of Knoop hardness by measurement of the indentation length using a microscope
BS ISO 18898:2012 Rubber. Calibration and verification of hardness testers
BS ISO 18898:2016 Rubber. Calibration and verification of hardness testers
BS EN 13523-4:2014 Coil coated metals. Test methods. Pencil hardness
BS EN 13523-4:2001 Coil coated metals - Test methods - Pencil hardness
19/30388218 DC BS EN 1534. Wood flooring. Determination of resistance to indentation (Brinell). Test method
BS EN ISO 14577-4:2016 Tracked Changes. Metallic materials. Instrumented indentation test for hardness and materials parameters. Test method for metallic and non-metallic coatings

PL-PKN, Scratch Hardness Tester

PN B12038-06-1987 Ceramic tiles Determination of scratch hardness of surface according to Mohs
PN C89030-01-1993 Plastices Determination of hardness Bali indentation method

American Society for Testing and Materials (ASTM), Scratch Hardness Tester

ASTM C1895-20 Standard Test Method for Determination of Mohs Scratch Hardness
ASTM B647-84(2006) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
ASTM B647-10 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
ASTM C1895-19 Standard Test Method for Determination of Mohs Scratch Hardness of Ceramic Tile
ASTM B648-10 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
ASTM A833-84(2001) Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM A833-84(1996) Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM A833-08 Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM D2583-13 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
ASTM D2583-13a Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
ASTM B648-78(2006) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
ASTM B648-78(2000) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
ASTM B648-23 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
ASTM A833-08a(2014) Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM F2496-05 Standard Practice for Determining the Scratch Hardness and Scrape Adhesion of Prints and Coatings
ASTM F2496-05(2011)e1 Standard Practice for Determining the Scratch Hardness and Scrape Adhesion of Prints and Coatings
ASTM F428-03a Standard Test Method for Intensity of Scratches on Aerospace Glass Enclosures
ASTM G171-03 Standard Test Method for Scratch Hardness of Materials Using a Diamond Stylus
ASTM G171-03(2009)e1 Standard Test Method for Scratch Hardness of Materials Using a Diamond Stylus
ASTM F428-09 Standard Test Method for Intensity of Scratches on Aerospace Glass Enclosures
ASTM F428-09(2014) Standard Test Method for Intensity of Scratches on Aerospace Glass Enclosures
ASTM F548-09(2014) Standard Test Method for Intensity of Scratches on Aerospace Transparent Plastics
ASTM G171-03(2017) Standard Test Method for Scratch Hardness of Materials Using a Diamond Stylus
ASTM G171-03(2009)e2 Standard Test Method for Scratch Hardness of Materials Using a Diamond Stylus
ASTM D7027-20 Standard Test Method for Evaluation of Scratch Resistance of Polymeric Coatings and Plastics Using an Instrumented Scratch Machine
ASTM A833-08a Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM B648-10(2015)e1 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
ASTM D2583-07 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
ASTM C730-98(2008) Standard Test Method for Knoop Indentation Hardness of Glass
ASTM C730-98(2021) Standard Test Method for Knoop Indentation Hardness of Glass
ASTM D1474-98(2002) Standard Test Methods for Indentation Hardness of Organic Coatings
ASTM D1474-98 Standard Test Methods for Indentation Hardness of Organic Coatings
ASTM B647-23 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
ASTM E384-99 Standard Test Method for Microindentation Hardness of Materials
ASTM E384-08a Standard Test Method for Microindentation Hardness of Materials
ASTM E384-05 Standard Test Method for Microindentation Hardness of Materials
ASTM E384-07a Standard Test Method for Microindentation Hardness of Materials
ASTM C661-98 Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
ASTM C661-06 Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
ASTM C661-06(2011) Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
ASTM A833-17 Standard Test Method for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM C661-15(2022) Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
ASTM A833-19 Standard Test Method for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM B647-10(2016) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
ASTM B724-00 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Newage, Portable, Non-Caliper-Type Instrument
ASTM B724-00(2006) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Newage, Portable, Non-Caliper-Type Instrument
ASTM E110-82(2002) Standard Test Method for Indentation Hardness of Metallic Materials by Portable Hardness Testers
ASTM E110-82(1997)e2 Standard Test Method for Indentation Hardness of Metallic Materials by Portable Hardness Testers
ASTM E384-07 Standard Test Method for Microindentation Hardness of Materials
ASTM C849-88(2011) Standard Test Method for Knoop Indentation Hardness of Ceramic Whitewares
ASTM C849-88(2006) Standard Test Method for Knoop Indentation Hardness of Ceramic Whitewares
ASTM D1474-98(2008) Standard Test Methods for Indentation Hardness of Organic Coatings
ASTM D1474/D1474M-13(2023) Standard Test Methods for Indentation Hardness of Organic Coatings
ASTM D1474/D1474M-13(2018) Standard Test Methods for Indentation Hardness of Organic Coatings
ASTM E384-22 Standard Test Method for Microindentation Hardness of Materials
ASTM E384-17 Standard Test Method for Microindentation Hardness of Materials
ASTM D1474/D1474M-13 Standard Test Methods for Indentation Hardness of Organic Coatings
ASTM F548-09 Standard Test Method for Intensity of Scratches on Aerospace Transparent Plastics
ASTM B647-84(2000) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
ASTM E3246-21 Standard Test Methods for Differential Indentation Depth Hardness of Metallic Materials
ASTM E3246-22 Standard Test Methods for Differential Indentation Depth Hardness of Metallic Materials
ASTM C730-98 Standard Test Method for Knoop Indentation Hardness of Glass
ASTM C730-98(2003) Standard Test Method for Knoop Indentation Hardness of Glass
ASTM E103-12 Standard Practice for Rapid Indentation Hardness Testing of Metallic Materials
ASTM E103-17 Standard Practice for Rapid Indentation Hardness Testing of Metallic Materials
ASTM E110-10 Standard Test Method for Indentation Hardness of Metallic Materials by Portable Hardness Testers
ASTM C661-15 Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
ASTM C849-88(1999) Standard Test Method for Knoop Indentation Hardness of Ceramic Whitewares
ASTM C1327-15(2019) Standard Test Method for Vickers Indentation Hardness of Advanced Ceramics
ASTM C1326-13(2023) Standard Test Method for Knoop Indentation Hardness of Advanced Ceramics
ASTM C730-98(2013) Standard Test Method for Knoop Indentation Hardness of Glass
ASTM C849-88(2020) Standard Test Method for Knoop Indentation Hardness of Ceramic Whitewares
ASTM B578-21 Standard Test Method for Microindentation Hardness of Electroplated Coatings
ASTM F548-03a Standard Test Method for Intensity of Scratches on Aerospace Transparent Plastics
ASTM F548-03 Standard Test Method for Intensity of Scratches on Aerospace Transparent Plastics
ASTM F548-19 Standard Test Method for Intensity of Scratches on Aerospace Transparent Plastics
ASTM F428-19 Standard Test Method for Intensity of Scratches on Aerospace Glass Enclosures
ASTM D2583-06 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
ASTM C1327-99 Standard Test Method for Vickers Indentation Hardness of Advanced Ceramics
ASTM C1326-03 Standard Test Method for Knoop Indentation Hardness of Advanced Ceramics
ASTM C1326-08 Standard Test Method for Knoop Indentation Hardness of Advanced Ceramics
ASTM C1326-99 Standard Test Method for Knoop Indentation Hardness of Advanced Ceramics
ASTM C1327-03 Standard Test Method for Vickers Indentation Hardness of Advanced Ceramics
ASTM C1326-08e1 Standard Test Method for Knoop Indentation Hardness of Advanced Ceramics
ASTM C1327-08 Standard Test Method for Vickers Indentation Hardness of Advanced Ceramics
ASTM E384-08 Standard Test Method for Microindentation Hardness of Materials
ASTM C1326-13 Standard Test Method for Knoop Indentation Hardness of Advanced Ceramics
ASTM C1327-15 Standard Test Method for Vickers Indentation Hardness of Advanced Ceramics
ASTM C849-88(2016) Standard Test Method for Knoop Indentation Hardness of Ceramic Whitewares
ASTM C1326-13(2018) Standard Test Method for Knoop Indentation Hardness of Advanced Ceramics
ASTM F548-01 Standard Test Method for Intensity of Scratches on Aerospace Transparent Plastics
ASTM F548-81(1994)e1 Standard Test Method for Intensity of Scratches on Aerospace Transparent Plastics
ASTM F548-03ae1 Standard Test Method for Intensity of Scratches on Aerospace Transparent Plastics
ASTM B934-04a Standard Test Method for Effective Case Depth of Ferrous Powder Metallurgy (P/M) Parts Using Microindentation Hardness Measurements
ASTM B934-04 Standard Test Method for Effective Case Depth of Ferrous Powder Metallurgy (P/M) Parts Using Microindentation Hardness Measurements
ASTM B933-09 Standard Test Method for Microindentation Hardness of Powder Metallurgy (P/M) Materials
ASTM B933-04 Standard Test Method for Microindentation Hardness of Powder Metallurgy (P/M) Materials
ASTM E103-84(1996) Standard Test Method for Rapid Indentation Hardness Testing of Metallic Materials
ASTM E103-84(2002) Standard Test Method for Rapid Indentation Hardness Testing of Metallic Materials
ASTM E103-84(1996)e1 Standard Test Method for Rapid Indentation Hardness Testing of Metallic Materials
ASTM F428-83(1997)e1 Standard Test Method for Intensity of Scratches on Aerospace Glass Enclosures
ASTM F428-03 Standard Test Method for Intensity of Scratches on Aerospace Glass Enclosures
ASTM F428-83(1997)e2 Standard Test Method for Intensity of Scratches on Aerospace Glass Enclosures
ASTM F428-01 Standard Test Method for Intensity of Scratches on Aerospace Glass Enclosures
ASTM B933-20 Standard Test Method for Microindentation Hardness of Powder Metallurgy (PM) Materials
ASTM B934-10 Standard Test Method for Effective Case Depth of Ferrous Powder Metallurgy (P/M) Parts Using Microindentation Hardness Measurements
ASTM B933-14 Standard Test Method for Microindentation Hardness of Powder Metallurgy 40;PM41; Materials
ASTM D7027-13 Standard Test Method for Evaluation of Scratch Resistance of Polymeric Coatings and Plastics Using an Instrumented Scratch Machine
ASTM E110-14 Standard Test Method for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers

ES-UNE, Scratch Hardness Tester

UNE-EN ISO 6769:2023 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale (ISO 6769:2022)
UNE-EN 59:2016 Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester
UNE-CEN/TS 17629:2021 Nanotechnologies - Nano- and micro- scale scratch testing (Endorsed by Asociación Española de Normalización in July of 2021.)
UNE-EN ISO 14577-1:2016 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2015)
UNE-EN ISO 14577-3:2016 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2015)
UNE-EN ISO 14577-2:2016 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines (ISO 14577-2:2015)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Scratch Hardness Tester

GB/T 25898-2010(英文版) Instrumented nanoindentation test—Indentation hardness and modulus of thin film
GB/T 2411-2008 Plastics and ebonite.Determination of indentation hardness by means of a durometer(shore hardness)
GB/T 3398-1982 Test for hardness of plastics by the ball indentation
GB/T 3398.1-2008 Plastics.Determination of hardness.Part 1:Ball indentation method
GB/T 21838.1-2008 Metallic materials.Instrumented indentation test for hardness and materials parameters.Part 1:Test method
GB/T 22067.3-2008 Instrumented indentation tests for hardness and material parameters of metallic materials - Part 3: Calibration of standard blocks
GB/T 21838.3-2008 Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 3:calibration of reference blocks
GB/T 24523-2009 Test method for rapid indentation (Brinell)hardness testing of metallic materials
GB/T 37782-2019(英文版) "Metallic materials—Indentation test—Determination of strength,hardness and stressstrain curve"
GB/T 22067.2-2008 Instrumented indentation tests for hardness and material parameters of metallic materials - Part 2: Inspection and calibration of testing machines
GB/T 21838.2-2008 Metallic materials. Instrumented indentation test for hardness and materials parameters. Part 2: Verification and calibration of testing machines
GB/T 21838.4-2008 Metallic materials.Instrumented indentation test for hardness and materials Parameters.Part 4:Test method for metallic and non-metallic coatings
GB/T 32057-2015 Test method for glass hardness and scratch resistance of high speed multiple unit

AT-ON, Scratch Hardness Tester

ONORM EN 101-1992 Ceramic tiles - Determination of Scratch hardness of surface according to Mohs
ONORM C 9433 Teil.2-1982 Testing of elastomers; determination of ball indentation hardness (IRHD) of soft rubber; nricro hardness fest
ONORM EN 59-1978 Glass reinjorced plastics. Measu.rem.ent of hardness by means of a barcol-impressor
ONORM C 9433 Teil.1-1982 Testing of elastomers; determination of ball indentation hardness (IRHD) of soft rubber

Association Francaise de Normalisation, Scratch Hardness Tester

NF A92-129*NF EN 15771:2010 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale.
NF EN ISO 22557:2020 Peintures et vernis - Essai de rayage manuel avec un stylo d'essai de dureté
NF T51-174*NF EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
NF EN 59:2016 Matières plastiques renforcées de verre - Détermination de la dureté par pénétration au moyen d'un appareil d'essai de dureté Barcol
NF ISO 48-4:2018 Caoutchouc vulcanisé ou thermoplastique - Détermination de la dureté - Partie 4 : dureté par pénétration par la méthode au duromètre (dureté Shore)
NF T46-003-4*NF ISO 48-4:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4 : indentation hardness by durometer method (Shore hardness)
NF T57-106*NF EN 59:2016 Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester
NF T46-052-1:2010 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1 : durometer method (Shore hardness).
NF T46-003-5*NF ISO 48-5:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 5 : indentation hardness by IRHD pocket meter method
XP CEN/TS 17629:2021 Nanotechnologies - Essais de rayure aux échelles nano- et micro métriques
NF A03-155-1*NF EN ISO 14577-1:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1 : test method
NF T46-052:1988 Vulcanized or thermoplastic rubber. Determination of identation hardness by means of type shore pocket hardness meters.
NF EN ISO 2039-1:2003 Plastiques - Détermination de la dureté - Partie 1 : méthode de pénétration à la bille
NF A03-155-1:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1 : test method.
NF A03-155-3*NF EN ISO 14577-3:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3 : calibration of reference blocks
NF A03-155-3:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3 : calibration of reference blocks.
NF T56-111*NF EN ISO 2439:2009 Flexible cellular polymeric materials - Determination of hardness (indentation technique).
NF EN ISO 2439:2009 Matériaux polymères alvéolaires souples - Détermination de la dureté (technique par indentation)
NF A03-155-2*NF EN ISO 14577-2:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2 : verification and calibration of testing machines
NF A03-155-2:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2 : verification and calibration of testing machines.
NF T57-106:1977 Glass reinforced plastics. Measurement of hardness by means of a barcol impressor .
NF EN ISO 19399:2017 Peintures et vernis - Détermination de l'épaisseur par la méthode d'entaille en coin (Méthode de rayer et de forage)
NF A03-155-4:2007 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4 : test method for metallic and non-metallic coatings.
NF A03-155-4*NF EN ISO 14577-4:2017 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4 : test method for metallic and non-metallic coatings
NF T46-052-2:2010 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 2 : IRHD pocket meter method.

National Metrological Technical Specifications of the People's Republic of China, Scratch Hardness Tester

JJF(石化) 009-2018 Calibration Specification for Scratch Testers
JJF(石化)009-2018 Calibration Specification for Scratch Testers
JJF 1363-1995 Technical specification for operation of plastic ball indentation hardness benchmark
JJF(纺织) 054-2016 Calibration Specification for Fabric Stiffness Tester
JJF(纺织)054-2016 Calibration Specification for Fabric Stiffness Tester

American National Standards Institute （ANSI), Scratch Hardness Tester

ANSI/ASTM A833:1996 Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ANSI/ASTM E110:1982 Test Method for Indentation Hardness of Metallic Materials by Portable Hardness Testers
ANSI/ASTM E103:1984 Method for Rapid Indentation Hardness Testing of Metallic Materials
ANSI/ASTM D3554:2007 Specification for Track-Resistant Black Thermoplastic High-Density Polyethylene Insulation for Wire and Cable

Danish Standards Foundation, Scratch Hardness Tester

DS/EN 15771:2010 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale
DS/EN 59:1978 Glass reinforced plastics. Measurement of hardness by means of a Barcol impressor
DS/EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
DS/ISO 7619:1989 Rubber. Determination of indentation hardness by means of pocket hardness meters
DS/EN ISO 14577-1:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method
DS/EN ISO 2039-1:2003 Plastics - Determination of hardness - Part 1: Ball indentation method
DS/EN ISO 14577-3:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks
DS/EN ISO 2439:2009 Flexible cellular polymeric materials - Determination of hardness (indentation technique)
DS/EN ISO 14577-2:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines
DS/EN 101:1993 Ceramic tiles. Determination of scratch hardness of surface according to Mohs
DS/EN ISO 14577-4:2007 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings

Lithuanian Standards Office , Scratch Hardness Tester

LST EN 15771-2010 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale
LST EN 59-2000 Glass reinforced plastics - Measurement of hardness by means of a Barcol impressor
LST EN ISO 868:2004 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)
LST EN ISO 14577-1:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2002)
LST EN ISO 2039-1:2004 Plastics - Determination of hardness - Part 1: Ball indentation method (ISO 2039-1:2001)
LST EN ISO 14577-3:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2002)
LST EN ISO 2439:2009 Flexible cellular polymeric materials - Determination of hardness (indentation technique) (ISO 2439:2008)
LST EN ISO 14577-2:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines (ISO 14577-2:2002)

AENOR, Scratch Hardness Tester

UNE-EN 15771:2011 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale
UNE-EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)
UNE-ISO 7619-1:2011 Rubber, vulcanized or thermoplastic -- Determination of indentation hardness -- Part 1: Durometer method (Shore hardness)
UNE-EN ISO 2039-1:2003 Plastics - Determination of hardness - Part 1: Ball indentation method (ISO 2039-1:2001)
UNE-EN ISO 2439:2009 Flexible cellular polymeric materials - Determination of hardness (indentation technique) (ISO 2439:2008)

YU-JUS, Scratch Hardness Tester

JUS EN 101-1991 Ceramic tiles. Determination of scratch hardness of surface according to Mohs
JUS G.S2.525-1984 Plastics. Determination of indentation hardness by means of a durometer (Shore hardness)
JUS G.S2.125-1986 Rubber. Determination of Indentation hardness of a durometer (hardness Shore A and D)
JUS G.S2.527-1984 Plastics. Determination of hardness by the ball indentation method. Rockwell hardness
JUS G.S2.526-1984 Plastics and ebonite. Determination of hardness by the ball indentation method
JUS G.S2.143-1986 Rubber. Determination of hardness by the ball indentation method (IRHD)

RU-GOST R, Scratch Hardness Tester

GOST 21318-1975 Measurement of microhardness by scratch diamond instruments
GOST R 8.907-2015 State system for ensuring the uniformity of measurements. State verification schedule for means measuring on Martens scales hardness and indentation scales hardness
GOST 24621-2015 Plastics and ebonite. Determination of indentation hardness by means of a durometer (Shore hardness)
GOST 18661-1973 Steel. Method for measurement of hardness by shock indentation
GOST 21323-1975 Abrasive tool hardnees measurement by cone indentation
GOST R ISO 7619-1-2009 Rubber, vulcanized or thermoplastic. Determination of indentation hardness. Part 1. Durometer method of measurement (Shore hardness)
GOST 19202-1980 Abrasive tool. Hardness measurement by ball indentation
GOST 28868-1990 Non-ferrous metals and alloys. Hardness measurement by shock indentation method
GOST R ISO 7619-2-2009 Rubber, vulcanized or thermoplastic. Determination of indentation hardness. Part 2. IRHD pocket meter method of measurement
GOST R 8.748-2011 State system for ensuring the uniformity of measurements. Metallic materials. Instrumented indentation test for hardness and materials parameters. Part 1. Test method

German Institute for Standardization, Scratch Hardness Tester

DIN 55656:2014 Paints and varnishes - Scratch test using a hardness pen
DIN EN ISO 6769:2023 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale (ISO 6769:2022)
DIN EN ISO 6769:2023-02 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale (ISO 6769:2022); German version EN ISO 6769:2022
DIN EN ISO 527-4:2023-02 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale (ISO 6769:2022); German version EN ISO 6769:2022
DIN EN ISO 4491-1:2023-02 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale (ISO 6769:2022); German version EN ISO 6769:2022
DIN EN ISO 5179:2023-02 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale (ISO 6769:2022); German version EN ISO 6769:2022
DIN EN ISO 19979:2023-02 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale (ISO 6769:2022); German version EN ISO 6769:2022
DIN EN ISO 868:2003-10 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003); German version EN ISO 868:2003
DIN EN ISO 14577-3:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2002); German version EN ISO 14557-3:2002
DIN ISO 48-4:2021-02 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4: Indentation hardness by durometer method (Shore hardness) (ISO 48-4:2018)
DIN EN 59:2016-06 Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester; German version EN 59:2016
DIN EN 15771:2010 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale; German version EN 15771:2010
DIN EN ISO 14577-1:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2002); German version EN ISO 14577-1:2002
DIN ISO 48-4:2021 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4: Indentation hardness by durometer method (Shore hardness) (ISO 48-4:2018)
DIN EN ISO 14577-1:2015-11 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2015); German version EN ISO 14577-1:2015
DIN ISO 7619-1:2012 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness) (ISO 7619-1:2010)
DIN EN ISO 14577-3:2015-11 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2015); German version EN ISO 14577-3:2015
DIN EN ISO 2439:2009 Flexible cellular polymeric materials - Determination of hardness (indentation technique) (ISO 2439:2008); English version of DIN EN ISO 2439:2009-05
DIN EN ISO 2439:2009-05 Flexible cellular polymeric materials - Determination of hardness (indentation technique) (ISO 2439:2008); German version EN ISO 2439:2008
DIN EN ISO 14577-3:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2015); German version EN ISO 14577-3:2015
DIN EN ISO 14577-2:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines (ISO 14577-2:2002); German version EN ISO 14577-2:2002
DIN 51917:2002-12 Testing of carbonaceous materials - Rockwell hardness test - Ball indentation method; Solid materials
DIN EN ISO 2039-1:2003-06 Plastics - Determination of hardness - Part 1: Ball indentation method (ISO 2039-1:2001); German version EN ISO 2039-1:2003
DIN EN ISO 14577-2:2015-11 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines (ISO 14577-2:2015); German version EN ISO 14577-2:2015
DIN EN 59:1977 Glass Reinforced Plastics; Measurement of Hardness by Means of a Barcol Impressor
DIN EN 59:2016 Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester; German version EN 59:2016
DIN 3761-12:1984 Rotary shaft lip type seals for automobils; test; determination of indentation hardness of elastomers; micro hardness test
DIN EN ISO 14577-4:2017-04 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings (ISO 14577-4:2016); German version EN ISO 14577-4:2016

Korean Agency for Technology and Standards (KATS), Scratch Hardness Tester

KS M ISO 17541:2016 Plastics － Quantitative evaluation of scratch-induced damage and scratch visibility
KS M ISO 17541-2016(2021) Plastics － Quantitative evaluation of scratch-induced damage and scratch visibility
KS M ISO 868-2016(2021) Plastics and ebonite－Determination of indentation hardness by means of a durometer(Shore hardness)
KS B ISO 14577-3:2004 Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 3:Calibration of reference blocks
KS B ISO 14577-3:2017 Metallic materials－Instrumented indentation test for hardness and materials parameters－Part 3：Calibration of reference blocks
KS M ISO 6441-1:2005 Paints and varnishes－Determination of micro－indentation hardness－Part 1：Knoop hardness by measurement of indentation length
KS M ISO 6441-1:2002 Paints and varnishes－Determination of micro－indentation hardness－Part 1：Knoop hardness by measurement of indentation length
KS M ISO 6441-2:2002 Paints and varnishes－Determination of micro－indentation hardness－Part 2：Knoop hardness by measurement of indentation depth under load
KS M ISO 6441-2:2005 Paints and varnishes－Determination of micro－indentation hardness－Part 2：Knoop hardness by measurement of indentation depth under load
KS M ISO 7619-1:2011 Rubber, vulcanized or thermoplastic-Determination of indentation hardness-Part 1:Durometer method(Shore hardness)
KS M ISO 7619-1:2016 Rubber, vulcanized or thermoplastic－Determination of indentation hardness－Part 1：Durometer method(Shore hardness)
KS L 1208-2005 TESTING METHOD FOR KNOOP INDENTATION HARDNESS OF CERAMIC WHITEWARES
KS B ISO 14577-1:2004 Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 1:Test method
KS B ISO 14577-1:2015 Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 1:Test method
KS M ISO 7619-1-2016(2021) Rubber, vulcanized or thermoplastic－Determination of indentation hardness－Part 1：Durometer method(Shore hardness)
KS M ISO 2039-1-2003(2018) Plastics－Determination of hardness－Part 1：Ball indentation method
KS B ISO 14577-3-2004(2009) Metallic materials－Instrumented indentation test for hardness and materials parameters－Part 3：Calibration of reference blocks
KS M ISO 2439-2012(2017) Flexible cellular polymeric materials－ Determination of hardness(indentation technique)
KS M ISO 2439-2012(2022) Flexible cellular polymeric materials－ Determination of hardness(indentation technique)
KS D 0294-2009 Standard method for the evaluation of repassivation rate of stainless steel components using laboratory scratch test
KS M ISO 2439:2012 Flexible cellular polymeric materials－ Determination of hardness(indentation technique)
KS B ISO 14577-2:2004 Metallic materials-instrumented indentation test for hardness and materials parameters－Part 2：Verification and calibration of testing machines
KS B ISO 14577-2-2004(2009) Metallic materials-instrumented indentation test for hardness and materials parameters－Part 2：Verification and calibration of testing machines
KS B ISO 14577-2:2017 Metallic materials-instrumented indentation test for hardness and materials parameters－Part 2：Verification and calibration of testing machines
KS M ISO 7619-2-2016(2021) Rubber, vulcanized or thermoplastic－Determination of indentation hardness－Part 2：IRHD pocket meter method
KS D ISO 14577-4:2011 Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 4:Test method for metallic and non-metallic coatings
KS M ISO 7619-2:2011 Rubber, vulcanized or thermoplastic-Determination of indentation hardness-Part 2:IRHD pocket meter method
KS M ISO 7619-2:2016 Rubber, vulcanized or thermoplastic－Determination of indentation hardness－Part 2：IRHD pocket meter method
KS L ISO 9385-2010(2020) Testing method for knoop indentation hardness of glass and glass-ceramics
KS L 2102-2000 Testing method for knoop indentation hardness of glass and glass-ceramics
KS L 2102-1980 Testing method for knoop indentation hardness of glass and glass-ceramics
KS M ISO 18898:2010 Rubber-Calibration and verification of hardness testers
KS D ISO 14577-4-2011(2021) Metallic materials－Instrumented indentation test for hardness and materials parameters－Part 4：Test method for metallic and non-metallic coatings
KS D ISO 14577-4-2011(2016) Metallic materials－Instrumented indentation test for hardness and materials parameters－Part 4：Test method for metallic and non-metallic coatings

US-FCR, Scratch Hardness Tester

FCR COE CRD-C 130-01-2001 STANDARD RECOMMENDED PRACTICE FOR ESTIMATING SCRATCH HARDNESS OF COARSE AGGREGATE PARTICLES

International Federation of Trucks and Engines, Scratch Hardness Tester

NAVISTAR MPAPS DT-16-2014 Scratch and Mar Testing for Hard Plastic Trim
NAVISTAR MPAPS DT-16-2017 Scratch and Mar Testing for Hard Plastic Trim

工业和信息化部/国家能源局, Scratch Hardness Tester

JB/T 12721-2016 Technical specifications for in-situ nanoindentation/scratch tester for solid materials

KR-KS, Scratch Hardness Tester

KS M ISO 868-2016 Plastics and ebonite－Determination of indentation hardness by means of a durometer(Shore hardness)
KS M ISO 6441-1-2002 Paints and varnishes－Determination of micro－indentation hardness－Part 1：Knoop hardness by measurement of indentation length
KS M ISO 6441-2-2002 Paints and varnishes－Determination of micro－indentation hardness－Part 2：Knoop hardness by measurement of indentation depth under load
KS M ISO 7619-1-2016 Rubber, vulcanized or thermoplastic－Determination of indentation hardness－Part 1：Durometer method(Shore hardness)

PT-IPQ, Scratch Hardness Tester

NP ISO 7619:2001 Rubber Determination od indentation hardness by means of packet hardness meters

(U.S.) Ford Automotive Standards, Scratch Hardness Tester

FORD FLTM EU-BO 054-1-2001 INDENTATION HARDNESS TEST FOR PLASTICS
FORD FLTM EU-BO 054-01-2001 INDENTATION HARDNESS TEST FOR PLASTICS
FORD FLTM EU-BO 051-05-2001 INDENTATION HARDNESS TEST FOR POLYURETHANE FOAMED PARTS
FORD WSS-M6J175-A-1997 PRIMER SURFACER, 130 C BAKING TEMPERATURE, CHIP AND SCRATCH INHIBITING, REPAIR PARTS

VN-TCVN, Scratch Hardness Tester

TCVN 4502-2008 Plastics and ebonite.Determination of indentation hardness by means of a durometer (Shore hardness)
TCVN 6415-18-2005 Ceramic floor and wall tiles.Test methods.Part 18: Determination of scratch hardness of surface according to Mohs'scale
TCVN 5728-1993 Measuring means of Vicker hardness.Verification schedules

TH-TISI, Scratch Hardness Tester

TIS 2245-2005 Plastics and ebonite.determination of indentation hardness by means of a durometer (shore hardness)

FI-SFS, Scratch Hardness Tester

SFS-ISO 868 E:1986 This standard is approved in English

IN-BIS, Scratch Hardness Tester

IS 13630 Pt.13-1993 Ceramic tiles. Methods of test. Part 13: Determination of scratch hardness of surface according to mohs
IS 13360 Pt.5/Sec.11-1992

ZA-SANS, Scratch Hardness Tester

SANS 7619:2003 Rubber - Determination of indentation hardness by means of pocket hardness meters
SANS 7619-1:2009 Rubber, vulcanized or thermoplastic - Determination of indentation hardness Part 1: Durometer method (Shore hardness)
SANS 14577-1:2009 Metallic materials - Instrumented indentation test for hardness and materials parameters Part 1: Test method
SANS 14577-3:2009 Metallic materials - Instrumented indentation test for hardness and materials parameters Part 3: Calibration of reference blocks
SANS 14577-2:2009 Metallic materials - Instrumented indentation test for hardness and materials parameters Part 2: Verification and calibration of testing machines
SANS 7619-2:2009 Rubber, vulcanized or thermoplastic - Determination of indentation hardness Part 2: IRHD pocket meter method

SE-SIS, Scratch Hardness Tester

SIS SS 16 13 53-1984 Plastics — Determination of hardness by the ball indentation method — Part 2: Rockwell hardness
SIS 16 92 12-1975 Flexible cellular materials. Hardness testing by indentation
SIS SS 16 84 05-1982 Glass reinforced plastics - Measurement of hardness by means of a Barcol im pressor

Indonesia Standards, Scratch Hardness Tester

SNI 13-6176-1999 Determination of hardness index of rock by indentation test
SNI ISO 2039-1:2011 Plastics - Determination of hardness - Part 1: Ball indentation method

Professional Standard - Machinery, Scratch Hardness Tester

JB/T 20104-2007 Hardness tester
JB/T 7410-2010 Specification for the ball indentation hardness testers of plastics
JB/T 7410-1994 Specifications for Plastic Ball Indentation Hardness Tester
JB/T 9318-1999 Geodetic instruments-circle graduations of visual reading

工业和信息化部, Scratch Hardness Tester

JB/T 20104-2022 Tablet Hardness Tester

National Metrological Verification Regulations of the People's Republic of China, Scratch Hardness Tester

JJG 369-1993 Verification Regulation of Plastic Ball Indentation Hardness Testing Machine
JJG 2091-1995 Verification Scheme of Measuring Instruments for Plastic Ball Indentation Hardness
JJG(烟草) 06-2006 Cigarette/filter rod hardness tester test regulation
JJG(烟草) 04-1998 Verification Regulations for Cigarette Hardness Tester by Total Pressing Method

TR-TSE, Scratch Hardness Tester

TS 2401-1976 PLATICS AND EBON?TE — DETERMINATION OF HARDNESS BY THE BALL INDENTATION METHOD
TS 2706-1977 FLEXIBLE CELLULAR MATERIALS HARD NESS TESTING BY INDENTATION TECHNIQUES

Professional Standard - Ferrous Metallurgy, Scratch Hardness Tester

YB/T 4285-2012 Standard test method for indentation hardness of metallic materials by portable hardness testers

GM Daewoo, Scratch Hardness Tester

GMKOREA EDS-T-7410-2011

US-Unspecified Preparing Activity, Scratch Hardness Tester

DI-EMCS-81855-2011 HIGH-ALTITUDE EMP (HEMP) HARDNESS MAINTENANCE AND HARDNESS SURVEILLANCE (HM/HS) PLAN

ES-AENOR, Scratch Hardness Tester

国家市场监督管理总局、中国国家标准化管理委员会, Scratch Hardness Tester

GB/T 37900-2019 Test method of hardness and fracture toughness for ultra-thin glass—Low-load vickers hardness indentation method

CEN - European Committee for Standardization, Scratch Hardness Tester

EN ISO 14577-1:2002 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method
EN ISO 14577-3:2002 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks
EN ISO 14577-2:2002 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines

Professional Standard - Textile, Scratch Hardness Tester

FZ/T 90080.1-1995 Test method for ball indentation hardness of plastic pick knots for looms
FZ/T 90079.1-1995 Test method for ball indentation hardness of nitrile pick knots for cotton looms
FZ/T 90078.1-1995 Test method for ball indentation hardness of nitrile buffer rings for cotton looms

Standard Association of Australia （SAA）, Scratch Hardness Tester

AS/NZS 3572.22:1997 Plastics - Glass filament reinforced plastics (GRP) - Methods of test - Method for the determination of hardness by means of a Barcol impressor

Group Standards of the People's Republic of China, Scratch Hardness Tester

T/SHZSAQS 00119-2022 Leeb Hardness Tester Operating Technical Regulations

Defense Logistics Agency, Scratch Hardness Tester

DLA MIL-HDBK-816 VALID NOTICE 2-2007 Guidelines for Developing Radiation Hardness Assurance Device Specifications
DLA MIL-HDBK-816 VALID NOTICE 1-2007 GUIDELINES FOR DEVELOPING RADIATION HARDNESS ASSURANCE DEVICE SPECIFICATIONS
DLA MIL-HDBK-816 CHG NOTICE 1-2002 GUIDELINES FOR DEVELOPING RADIATION HARDNESS ASSURANCE DEVICE SPECIFICATIONS

国家能源局, Scratch Hardness Tester

SY/T 4113.6-2019 Test methods for performance of pipeline anti-corrosion coatings Part 6: Indentation hardness test