ZH
RU
ES

Metal Strength Universal Testing Machine

Metal Strength Universal Testing Machine, Total:477 items.

In the international standard classification, Metal Strength Universal Testing Machine involves: Testing of metals, Adhesives, Metrology and measurement in general, Mechanical testing, Protection of and in buildings, Surface treatment and coating, Shipbuilding and marine structures in general, Industrial automation systems, Iron and steel products, Ceramics, Materials for the reinforcement of composites, Non-ferrous metals, Structures of buildings, Machine tools, Powder metallurgy, Jewellery, Petroleum, petroleum products and natural gas handling equipment, Semiconductor devices, Bearings, Magnetic materials, Cellular materials, Coatings and related processes used in aerospace industry, Agricultural machines, implements and equipment, Components and accessories for telecommunications equipment, Vocabularies, Chipless working equipment, Reinforced plastics, Electrical accessories, Construction materials, TESTING, Plastics, Elements of buildings, Paint coating processes, Dentistry, Pipeline components and pipelines, Insulating materials, Electrical wires and cables, Fibre optic communications, Fruits. Vegetables, Electronic display devices, Rubber.

National Metrological Verification Regulations of the People's Republic of China, Metal Strength Universal Testing Machine

JJG 157-2008 Verification Regulation of Universal Tension and Compression Testing Machines for Non-metallic
JJG 157-1995 Verification Regulation of Tension Compression and Universal Testing Machina for Non-metallic

HU-MSZT, Metal Strength Universal Testing Machine

IT-UNI, Metal Strength Universal Testing Machine

UNI 4431-1960
UNI 3212-1952
UNI 560-1975
UNI 3669-1968
UNI 562-P1-1975
UNI 562-P2-1975
UNI 7483-1975
UNI 7480-1975
UNI 7481-1975
UNI 7482-1975
UNI EN ISO/ASTM 52941:2021 Additive manufacturing - System performance and reliability - Acceptance tests for laser metal powder-bed fusion machines for metallic materials for aerospace application

RU-GOST R, Metal Strength Universal Testing Machine

GOST 25.503-1997 Design calculation and strength testing. Methods of mechanical testing of metals. Method of compression testing
GOST 25.503-1980 Strength calculation and testing. Methods of mechanical testing of metals. Methods of compression tests
GOST R 57173-2016 Calculation and strength testing. Methods of mechanical testing of metals. Test for stress relaxation of metals and alloys at a compression. General requirements
GOST 8.509-1984 State system for ensuring the uniformity of measurements. Long-term strength and creep testing machines. Calibration methods
GOST 26007-1983 Design, calculation and strength testing. Methods of mechanical testing of metals. Methods for stress relaxation testing
GOST 25.502-1979 Strength analysis and testing in machine building. Methods of metals mechanical testing. Methods of fatigue testing
GOST 25.506-1985 Design, calculation and strength testing. Methods of mechanical testing of metals. Determination of fracture toughness characteristics under the static loading
GOST 8-1982 Metal cutting machine tools. General requirements to accuracy tests
GOST 25.505-1985 Design, calculation and strength testing. Methods of mechanical testing of metals. Method of testing on the low cycle fatigue at heat mechanical loading
GOST R 8.904-2015 State system for ensuring the uniformity of measurements. Metallic materials. Instrumented indentation test for hardness and materials parameters. Part 2. Verification and calibration of testing machines
GOST IEC 60811-501-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 501. Mechanical tests. Tests for determining the mechanical properties of insulating and sheathing compounds
GOST 25.602-1980 Design calculation and strength testings. Methods of mechanical testing of polymeric composite materials. Test for compression properties at normal, elevated and low temperatures

German Institute for Standardization, Metal Strength Universal Testing Machine

DIN 50125:2016 Testing of metallic materials - Tensile test pieces
DIN 50125:2009 Testing of metallic materials - Tensile test pieces
DIN EN 2828:1993 Aerospace series; adhesion test for metallic coatings by burnishing; german version EN 2828:1993
DIN EN 2830:1993 Aerospace series; adhesion test for metallic coatings by shearing action; german version EN 2830:1993
DIN EN ISO 6506-2:2006 Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines (ISO 6506-2:2005); English version of DIN EN ISO 6506-2:2006-03
DIN EN ISO 6507-2:2006 Metallic materials - Vickers hardness test - Part 2: Verification and calibration of testing machines (ISO 6507-2:2005); English version of DIN EN ISO 6507-2:2006-03
DIN EN ISO 6506-2:2019-03 Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines (ISO 6506-2:2017); German version EN ISO 6506-2:2018
DIN EN ISO 6507-2:2018-07 Metallic materials - Vickers hardness test - Part 2: Verification and calibration of testing machines (ISO 6507-2:2018); German version EN ISO 6507-2:2018
DIN ISO 10791-3:2001 Machine tools - Test conditions of machining centres - Part 3: Geometric tests for machines with integral indexable or continuous universal heads (vertical Z-axis) (ISO 10791-3:1998)
DIN EN ISO 4545-2:2018-07 Metallic materials - Knoop hardness test - Part 2: Verification and calibration of testing machines (ISO 4545-2:2017); German version EN ISO 4545-2:2018
DIN EN ISO 6508-2:2022-12 Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters (ISO/DIS 6508-2:2022); German and English version prEN ISO 6508-2:2022 / Note: Date of issue 2022-11-18*Intended as replacement for DIN...
DIN EN ISO 6508-2:2015-06 Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters (ISO 6508-2:2015); German version EN ISO 6508-2:2015 / Note: To be replaced by DIN EN ISO 6508-2 (2022-12).
DIN 50162:1978-09 Testing of clad steels; determination of shear strength between cladding metal and parent metal in shear test
DIN EN 14509-3:2021-09 Factory-made double skin metal faced insulating sandwich panels - Part 3: Test methods for determining mechanical strength, building physical behaviour and durability; German and English version prEN 14509-3:2021 / Note: Date of issue 2021-08-13*Intend...
DIN EN ISO 6506-2:2023-11 Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines (ISO/DIS 6506-2:2023); German and English version prEN ISO 6506-2:2023 / Note: Date of issue 2023-10-20*Intended as replacement for DIN EN ISO 6506-2 ...
DIN ISO 7905-2:1998 Plain bearings - Bearing fatigue - Part 2: Test with a cylindrical specimen of a metallic bearing material (ISO 7905-2:1996)
DIN EN ISO 6506-2:2019 Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines (ISO 6506-2:2017)
DIN EN ISO 6507-2:2018 Metallic materials - Vickers hardness test - Part 2: Verification and calibration of testing machines (ISO 6507-2:2018)
DIN EN ISO 4545-2:2018 Metallic materials - Knoop hardness test - Part 2: Verification and calibration of testing machines (ISO 4545-2:2017)
DIN EN 14651:2007-12 Test method for metallic fibre concrete - Measuring the flexural tensile strength (limit or proportionality (LOP), residual); German version EN 14651:2005+A1:2007
DIN 50162:1978 Testing of clad steels; determination of shear strength between cladding metal and parent metal in shear test
DIN EN 14024:2021-10 Metal profiles with thermal barrier - Mechanical performance - Requirements, proof and tests for assessment; German and English version prEN 14024:2021 / Note: Date of issue 2021-08-27*Intended as replacement for DIN EN 14024 (2005-01).
DIN EN 14024:2005-01 Metal profiles with thermal barrier - Mechanical performance - Requirements, proof and tests for assessment; German version EN 14024:2004 / Note: To be replaced by DIN EN 14024 (2021-10).
DIN ISO 4386-2:2015 Plain bearings - Metallic multilayer plain bearings - Part 2: Destructive testing of bond for bearing metal layer thicknesses >= 2 mm (ISO 4386-2:2012)
DIN EN ISO 6508-2:2006 Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, N, T) (ISO 6508-2:2005); English version of DIN EN ISO 6508-2:2006-03
DIN EN 14651:2007 Test method for metallic fibre concrete - Measuring the flexural tensile strength (limit or proportionality (LOP), residual) (includes Amendment A1:2007); English version of DIN EN 14651:2007-12
DIN EN ISO 13123:2012-04 Metallic and other inorganic coatings - Test method of cyclic heating for thermal-barrier coatings under temperature gradient (ISO 13123:2011); German version EN ISO 13123:2011
DIN EN ISO 14577-2:2015-11 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines (ISO 14577-2:2015); German version EN ISO 14577-2:2015
DIN EN ISO 14577-2:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines (ISO 14577-2:2002); German version EN ISO 14577-2:2002
DIN 50157-1:2020 Metallic materials - Hardness testing with portable measuring devices operating with mechanical penetration depth - Part 1: Test method
DIN ISO 7905-4:1998 Plain bearings - Bearing fatigue - Part 4: Test on half-bearings of a metallic multilayer bearing material (ISO 7905-4:1996)
DIN ISO 7905-3:1998 Plain bearings - Bearing fatigue - Part 3: Tests on plain strips of a metallic multilayer bearing material (ISO 7905-3:1996)
DIN EN ISO 4545-2:2006 Metallic materials - Knoop hardness test - Part 2: Verification and calibration of testing machines (ISO 4545-2:2005); English version of DIN EN ISO 4545-2:2006-03
DIN EN ISO/ASTM 52941:2022-02 Additive manufacturing - System performance and reliability - Acceptance tests for laser metal powder-bed fusion machines for metallic materials for aerospace application (ISO/ASTM 52941:2020); German version EN ISO/ASTM 52941:2020
DIN EN ISO 6506-2:2015 Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines (ISO 6506-2:2014); German version EN ISO 6506-2:2014
DIN 50157-2:2020 Metallic materials - Hardness testing with portable measuring devices operating with mechanical penetration depth - Part 2: Verification and calibration of the testing devices
DIN 51105:2010 Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Determination of flexural strength by the ring-on-ring test
DIN EN ISO 6507-2:2013 Metallic materials - Vickers hardness test - Part 2: Verification and calibration of testing machines (ISO 6507-2:2005); German version EN ISO 6507-2:2005
DIN EN 2829:1995 Aerospace series - Adhesion test for metallic coatings by shot peening; German version EN 2829:1994

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Metal Strength Universal Testing Machine

GB/T 7749-1987 Test method of cleavage strength of adhesive (metal to metal)
GB 7749-1987 Test Method for Splitting Strength of Adhesives (Metal to Metal)
GB/T 1452-1987 Test method for flatwise tension strength of nonmetal sandwich constructions
GB/T 28487-2012 Precious metal alloys chains.Determination of tensile strength.Method of tensile testing
GB/T 12948-1991 Plain bearings--Metallic multilayer plain bearings--Destructive testing of bond for bearing metals
GB/T 37782-2019(英文版) "Metallic materials—Indentation test—Determination of strength,hardness and stressstrain curve"
GB/T 5263-2009 Agricultural tractors and machinery.Guards for power take-off drive shafts.Strength and wear tests and acceptance criteria
GB/T 5263.1-2000 Tractors and machinery for agriculture and forestry-Guards for power take-off(PTO)drive-shafts-Part 1:Strengh test
GB/T 20671.7-2006 Classification system and test methods for nonmetallic gasket materials-Part7:Standard test methods for tension testing of nonmetallic gasket materials
GB/T 5270-1985 Metallic coatings on metallic substrates--Electrodeposited and chemically deposited coatings--Review of methods available for testing adhesion
GB/T 5270-2005 Metallic coatings on metallic substrates-Electrodeposited and chemically deposited coatings-Review of methods available for testing adhesion
GB/T 42261-2022 Metallic and other inorganic coatings—Test method of cyclic heating for thermal-barrier coatings under temperature gradient
GB/T 15972.31-2008 Specifications for optical fibre test methods.Part 31:Measurement methods and test procedures for mechanical characteristics.Tensile strength
GB/T 22067.2-2008 Instrumented indentation tests for hardness and material parameters of metallic materials - Part 2: Inspection and calibration of testing machines
GB/T 21838.2-2022 Metallic materials—Instrumented indentation test for hardness and materials parameters—Part 2: Verification and calibration of testing machines
GB/T 21838.2-2008 Metallic materials. Instrumented indentation test for hardness and materials parameters. Part 2: Verification and calibration of testing machines

Military Standard of the People's Republic of China-General Armament Department, Metal Strength Universal Testing Machine

GJB 446-1988 Adhesive 90° Peel Strength Test Method (Metal to Metal)
GJB 445-1988 Test method for high temperature tensile strength of adhesives (metal to metal)
GJB 94-1986 Adhesives—Test Method for Uneven Peel Strength (Metal to Metal)
GJB 448-1988 Adhesive low temperature 90° peel strength test method (metal to metal)
GJB 447-1988 Adhesive high temperature 90° peel strength test method (metal to metal)
GJB 444-1988 Test method for high temperature tensile shear strength of adhesives (metal-to-metal)
GJB 8671.13-2015 Test methods for metal cartridges Part 13: Low temperature strength test
GJB 8671.12-2015 Test methods for metal cartridges Part 12: Aging strength test
GJB 8671.11-2015 Test methods for metal cartridges Part 11: Firing strength and ejection tests
GJB 8760.3-2015 Test methods for physical properties of precious metals and their alloys Part 3: Determination of resistance-temperature characteristics
GJB 8760.2-2015 Test methods for physical properties of precious metals and their alloys Part 2: Determination of temperature coefficient of resistance (0℃~100℃)

American Society for Testing and Materials (ASTM), Metal Strength Universal Testing Machine

ASTM E3090/E3090M-18 Standard Test Methods for Strength Properties of Metal Ceiling Suspension Systems
ASTM E3090/E3090M-20 Standard Test Methods for Strength Properties of Metal Ceiling Suspension Systems
ASTM E3090/E3090M-19 Standard Test Methods for Strength Properties of Metal Ceiling Suspension Systems
ASTM E3090/E3090M-17 Standard Test Methods for Strength Properties of Metal Ceiling Suspension Systems
ASTM E3090/E3090M-22 Standard Test Methods for Strength Properties of Metal Ceiling Suspension Systems
ASTM D2295-96(2002) Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)
ASTM D2295-96(2008) Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)
ASTM D2295-96(2016) Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)
ASTM B533-85(1998) Standard Test Method for Peel Strength of Metal Electroplated Plastics
ASTM D1062-96e1 Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds
ASTM B533-85(2004) Standard Test Method for Peel Strength of Metal Electroplated Plastics
ASTM B533-85(2019) Standard Test Method for Peel Strength of Metal Electroplated Plastics
ASTM D1062-08(2015) Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds
ASTM D1062-08 Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds
ASTM B312-14 Standard Test Method for Green Strength of Specimens Compacted from Metal Powders
ASTM B528-10 Standard Test Method for Transverse Rupture Strength of Metal Powder Specimens
ASTM E767-96 Standard Test Method for Shear Strength Properties of Metal Connector Plates
ASTM B528-05 Standard Test Method for Transverse Rupture Strength of Metal Powder Specimens
ASTM B312-96(2002) Standard Test Method for Green Strength for Compacted Metal Powder Specimens
ASTM B312-96 Standard Test Method for Green Strength for Compacted Metal Powder Specimens
ASTM B312-09 Standard Test Method for Green Strength of Specimens Compacted from Metal Powders
ASTM D1002-10(2019) Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
ASTM A894/A894M-00 Standard Test Method for Saturation Magnetization or Induction of Nonmetallic Magnetic Materials
ASTM D3552-96(2002) Test Method for Tensile Properties of Fiber Reinforced Metal Matrix Composites
ASTM B528-12 Standard Test Method for Transverse Rupture Strength of Powder Metallurgy (PM) Specimens
ASTM B528-99 Standard Test Method for Transverse Rupture Strength of Metal Powder Specimens
ASTM E1304-97(2008)e1 Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials
ASTM B312-20 Standard Test Method for Green Strength of Specimens Compacted from Metal Powders
ASTM B528-16 Standard Test Method for Transverse Rupture Strength of Powder Metallurgy (PM) Specimens
ASTM E812-91(1997) Standard Test Method for Crack Strength of Slow-Bend Precracked Charpy Specimens of High-Strength Metallic Materials (Withdrawn 2005)
ASTM B533-85(2013) Standard Test Method for Peel Strength of Metal Electroplated Plastics
ASTM D3433-99(2020) Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints
ASTM D3552-17 Standard Test Method for Tensile Properties of Fiber Reinforced Metal Matrix Composites
ASTM B533-85(2009) Standard Test Method for Peel Strength of Metal Electroplated Plastics
ASTM D3433-99(2012) Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints
ASTM D3552-96e1 Test Method for Tensile Properties of Fiber Reinforced Metal Matrix Composites
ASTM D3552-96(2007) Standard Test Method for Tensile Properties of Fiber Reinforced Metal Matrix Composites
ASTM D3552-12 Standard Test Method for Tensile Properties of Fiber Reinforced Metal Matrix Composites
ASTM F459-06 Standard Test Methods for Measuring Pull Strength of Microelectronic Wire Bonds
ASTM D1002-05 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
ASTM D1002-99 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
ASTM D1002-01 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
ASTM D7617/D7617M-11 Standard Test Method for Transverse Shear Strength of Fiber-reinforced Polymer Matrix Composite Bars
ASTM E1681-03(2008)e2 Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials
ASTM B1021-21 Standard Test Method for Peel Resistance of Metal Sheets Joined by High Strength Bonds
ASTM E1681-03 Standard Test Method for Determining a Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials
ASTM E1681-03(2008)e1 Standard Test Method for Determining a Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials
ASTM F580-78(1991)e1 Test Method for Adhesion Strength of Bondable Films to Substrates in Ribbon-Wire Bonds
ASTM E1681-03(2013) Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials
ASTM ISO/ASTM 52941-20 Additive manufacturing — System performance and reliability — Acceptance tests for laser metal powder-bed fusion machines for metallic materials for aerospace application
ASTM ISO/ASTM52941-20 Additive manufacturing — System performance and reliability — Acceptance tests for laser metal powder-bed fusion machines for metallic materials for aerospace application
ASTM D2295-96 Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)
ASTM E1681-23 Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials
ASTM D1002-10 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
ASTM D3658-01(2016) Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
ASTM A894/A894M-00(2005) Standard Test Method for Saturation Magnetization or Induction of Nonmetallic Magnetic Materials
ASTM D3658-90(1995) Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
ASTM D3658-01(2008) Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
ASTM E1681-99e1 Standard Test Method for Determining a Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials
ASTM E1681-03(2008) Standard Test Method for Determining a Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials
ASTM E618-07(2013) Standard Test Method for Evaluating Machining Performance of Ferrous Metals Using an Automatic Screw/Bar Machine
ASTM D5656-95(2000) Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading

Professional Standard - Electron, Metal Strength Universal Testing Machine

SJ 20130-1992 Test methods for adhesion of metallic coatings
SJ/T 11109-1996 Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings Part 5 Adhesion strength tests
SJ/T 11112-1996 Metallic coatings - Test methods for electrodeposited silver and silver alloy coatings Part 2 Adhesion strength tests

国家市场监督管理总局、中国国家标准化管理委员会, Metal Strength Universal Testing Machine

GB/T 40072-2021 Strength test method for submersible metallic framework
GB/T 40073-2021 External pressure strength test procedure for metal pressure hull of submersibles
GB/T 38250-2019 Metallic materials—Verification of the alignment of fatigue testing machines
GB/T 37782-2019 Metallic materials—Indentation test—Determination of strength, hardness and stress-strain curve
GB/T 9790-2021 Metallic materials—Vickers and Knoop microhardness tests of metallic and other inorganic coatings
GB/T 15972.31-2021 Specifications for optical fibre test methods—Part 31: Measurement methods and test procedures for mechanical characteristics—Tensile strength

Professional Standard - Aerospace, Metal Strength Universal Testing Machine

QJ 479-1990 Test method for bonding strength of metal coatings

Japanese Industrial Standards Committee (JISC), Metal Strength Universal Testing Machine

JIS B 6338:1985 Test code for performance and accuracy of machining centers (vertical type)
JIS H 7405:1993 Test method for tensile properties of fiber reinforced metals
JIS H 7408:1994 Test method for fatigue properties of fiber reinforced metals
JIS H 7407:1995 Test method for compressive properties of fiber reinforced metals
JIS S 1019:1985 Strength test method of earthquake -- Proof fittings used for wooden furniture

Korean Agency for Technology and Standards (KATS), Metal Strength Universal Testing Machine

KS D 8513-2003 Test method for compressive properties of fiber reinforced metals
KS D 8509-1997(2022) Test method for fatigue properties of fiber reinforced metals
KS D 8509-1997(2017) Test method for fatigue properties of fiber reinforced metals
KS B ISO 4546-2003(2018)
KS D 8508-1997(2022) Test method for tensile properties of fiber reinforced metals
KS B ISO 4546:2003 Metallic materials－Hardness test－Verification of Knoop hardness testing machines
KS B ISO 204-2006(2011) Metallic materials－Uninterrupted uniaxial creeptesting intension－Method of test
KS B ISO 4547:2003 Metallic materials－Hardness test－Calibration of standardized blocks to be used for Knoop hardness testing machines
KS B 5526-2003(2018)
KS B ISO 4547-2003(2018)
KS B ISO 4386-2:2005 Plane bearings-Metallic multilayer plain bearings-Part 2:Destructive testing of bond for bearing metal layer thicknesses ≥ 2 mm
KS B ISO 10791-2:2014 Test conditions for machining centres — Part 2: Geometric tests for machines with vertical spindle or universal heads with vertical primary rotary axis(vertical Z-axis)
KS B ISO 10791-2:2007 Test conditions for machining centres-Part 2:Geometric tests for machines with vertical spindle or universal heads with vertical primary rotary axis(vertical Z-axis)
KS B ISO 10791-2:2016 Test conditions for machining centres — Part 2: Geometric tests for machines with vertical spindle or universal heads with vertical primary rotary axis(vertical Z-axis)
KS P 8427-2015(2021) Dentistry — Orthodonticmetallic mini screw — Test methods of torque and multiangularpull-out strength
KS D ISO ASTM 52941:2021 Additive manufacturing — System performance and reliability — Acceptance tests for laser metal powder-bed fusion machines for metallic materials for aerospace application
KS B ISO 14577-2-2004(2009) Metallic materials-instrumented indentation test for hardness and materials parameters－Part 2：Verification and calibration of testing machines
KS B ISO 7905-2:2007 Plain bearings－Bearing fatigue－Part 2：Test with a cylindrical specimen of a metallic bearing material
KS C IEC 60811-501:2020 Electric and optical fibre cables — Test methods for non-metallic materials — Part 501: Mechanical tests — Tests for determining the mechanical properties of insulating and sheathing compounds
KS B ISO 14577-2:2004 Metallic materials-instrumented indentation test for hardness and materials parameters－Part 2：Verification and calibration of testing machines
KS B ISO 14577-2:2017 Metallic materials-instrumented indentation test for hardness and materials parameters－Part 2：Verification and calibration of testing machines
KS C IEC 60811-512:2016 Electric and optical fibre cables-Test methods for non-metallic materials―Part 512：Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at

KR-KS, Metal Strength Universal Testing Machine

KS B ISO 4546-2003(2023)
KS B 5526-2003(2023)
KS D ISO ASTM 52941-2021 Additive manufacturing — System performance and reliability — Acceptance tests for laser metal powder-bed fusion machines for metallic materials for aerospace application
KS C IEC 60811-501-2020 Electric and optical fibre cables — Test methods for non-metallic materials — Part 501: Mechanical tests — Tests for determining the mechanical properties of insulating and sheathing compounds
KS C IEC 60811-512-2016 Electric and optical fibre cables-Test methods for non-metallic materials―Part 512：Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at

Professional Standard - Aviation, Metal Strength Universal Testing Machine

HB 5164-1981 Test method for tensile shear strength of metal bonded joints
HB 7110-1994 Test method for detail fatigue rating cutoff (DFRcutoff) of metallic materials
HB 6577-1992 Test method for smoke density of non-metallic materials inside civil aircraft cabin
HB 7616-1998 Test method for tensile properties of fiber reinforced metal matrix composite laminates
HB 7617-1998 Test method for flexural properties of fiber reinforced metal matrix composite laminates
HB 6577-2014 Test method for smoke density of non-metallic materials inside civil aircraft cabin
HB 5441.8-1989 Performance testing of powder metallurgy products and powders - Determination of radial crush strength of sintered metal bushings
HB 5441.3-1989 Performance testing of powder metallurgy products and powders Test method for tensile strength of sintered metal materials (except cemented carbide)

Association of German Mechanical Engineers, Metal Strength Universal Testing Machine

DVS 3101-1-1999

International Organization for Standardization (ISO), Metal Strength Universal Testing Machine

ISO 156:1982 Metallic materials; Hardness test; Verification of Brinell hardness testing machines
ISO 726:1982 Metallic materials — Hardness test — Calibration of standardized blocks to be used for Brinell hardness testing machines
ISO 716:1986 Metallic materials; Hardness test; Verification of Rockwell hardness testing machines (scales A - B - C - D - E - F - G - H - K)
ISO 6507-2:2005 Metallic materials - Vickers hardness test - Part 2: Verification and calibration of testing machines
ISO 6506-2:2005 Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines
ISO 4545-2:2005 Metallic materials - Knoop hardness test - Part 2: Verification and calibration of testing machines
ISO 4545-2:2017 Metallic materials - Knoop hardness test- Part 2:Verification and calibration of testing machines
ISO 6506-2:2014 Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines
ISO 6506-2:2017 Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines
ISO 6507-2:2018 Metallic materials - Vickers hardness test - Part 2: Verification and calibration of testing machines
ISO/DIS 6506-2:2023 Metallic materials — Brinell hardness test — Part 2: Verification and calibration of testing machines
ISO 1079:1989 Metallic materials; hardness test; verification of Rockwell superficial hardness testing machines (scales 15N, 30N, 45N, 15T, 30T and 45T)
ISO/DTR 15263:2023 Measurement uncertainties in mechanical tests on metallic materials — The evaluation of uncertainties in tensile testing
ISO 6506-2:1999 Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines
ISO 640:1984 Metallic materials — Hardness test — Calibration of standardized blocks to be used for Vickers hardness testing machines HV 0,2 to HV 100
ISO/CD TR 15262 Mechanical tests on metallic materials — Uncertainty in low-cycle fatigue
ISO/CD 6506-2 Metallic materials — Brinell hardness test — Part 2: Verification and calibration of testing machines
ISO 6508-2:2015 Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters
ISO/FDIS 6508-2:2023 Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines and indenters
ISO 6508-2:2022 Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines and indenters
ISO/TR 29381:2008 Metallic materials - Measurement of mechanical properties by an instrumented indentation test - Indentation tensile properties
ISO 14955-3:2020 Machine tools — Environmental evaluation of machine tools — Part 3: Principles for testing metal-cutting machine tools with respect to energy efficiency
ISO 146-2:1993 Metallic materials — Verification of Vickers hardness testing machines — Part 2: Less than HV 0,2
ISO 4386-2:1982 Plain bearings; Metallic multilayer plain bearings; Part 2 : destructive testing of bond for bearing metal layer thicknesses greater than or equal to 2 mm
ISO 4386-2:2012 Plain bearings - Metallic multilayer plain bearings - Part 2: Destructive testing of bond for bearing metal layer thicknesses 2 mm
ISO 1355:1989 Metallic materials; hardness test; calibration of standardized blocks to be used for Rockwell superficial hardness testing machines (scales 15N, 30N, 45N, 15T, 30T and 45T)
ISO/DIS 6508-2 Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines and indenters
ISO 10791-2:2001 Test conditions for machining centres - Part 2: Geometric tests for machines with vertical spindle or universal heads with vertical primary rotary axis (vertical Z-axis)
ISO 10791-2:2023 Test conditions for machining centres — Part 2: Geometric tests for machines with vertical spindle (vertical Z-axis)
ISO/ASTM 52941:2020 Additive manufacturing -- System performance and reliability -- Acceptance tests for laser metal powder-bed fusion machines for metallic materials for aerospace application
ISO 6508-2:1999 Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, N, T)
ISO 6508-2:2005 Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, N, T)
ISO 7905-2:1995 Plain bearings - Bearing fatigue - Part 2: Test with a cylindrical specimen of a metallic bearing material
ISO 13123:2011 Metallic and other inorganic coatings - Test method of cyclic heating for thermal-barrier coatings under temperature gradient
ISO/CD 14577-2:2023 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 2: Verification and calibration of testing machines
ISO 7905-4:1995 Plain bearings - Bearing fatigue - Part 4: Test on half-bearings of a metallic multilayer bearing material
ISO 674:1988 Metallic materials; hardness test; calibration of standardized blocks to be used for Rockwell hardness testing machines (scales A-B-C-D-E-F-G-H-K)
ISO 640-2:1993 Metallic materials — Calibration of standardized blocks to be used for Vickers hardness testing machines — Part 2: Less than HV 0,2
ISO 14577-2:2002 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines
ISO 14577-2:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines
ISO 7905-3:1995 Plain bearings - Bearing fatigue - Part 3: Test on plain strips of a metallic multilayer bearing material

RO-ASRO, Metal Strength Universal Testing Machine

STAS 7932/5-1990 Mechanical tests of spot, projection and seam welded joints of metals hardness test
STAS R 10025-1975 Tests of metals U-and V-notch impact test COMPARATIVE TABLE OF IMPACT STRENGHT AND IMPACT ENERGY
STAS 10897/1-1983 Tests of metals MECHANICAL TESTING OF BRAZED JOINTS Tensile testing
STAS 10897-1977 Tests of metals MECHANICAL TESTINGS FOR SOLDERED AND BRAZED JOINTS
STAS 10897/4-1983 Tests of metals MECHANICAL TESTING OF SOLDERED AND BRAZED JOINTS Bend testing
STAS 10897/2-1983 Tests of metals MECANICAL TESTING OF SOLDERED AND BRAZED JOINTS Sheartesting
STAS 7932/4-1990 Mechanical tests of spot and projection welded joints of metals. Torsional test
STAS 7932/2-1990 Mechanical tests of spot and projection welded joints of metals tension test
STAS 7932/3-1990 Mechanical tests of spot, projection and seam welded joints of metals peel test
STAS 9760-1984 TESTINGS OF METALS Determination of breaking tenacity under plane breaking strain conditions K10 METHOD
SR ISO 146-2:1996 Metallic materials. Verification of Vickers hardness testing machines. Part 2: Less than HV 0,2
STAS 7932/1-1990 MECHANICAL TESTS OF SPOT PROJECTION AND SEAM WELDED JOINTS OF METALS Tension shear tests
STAS SR ISO 640:1996 Metallic materials. Hardness test. Calibration of standardized blocks to be used for Vickers hardness testing machines HV 0,2 to HV 100
STAS 12030/8-1986 General use machinetools for metals cutting Test pieces for accuracy checking up CHECKING Up METHODS OF DIMENSIONS CONSTANT OF CYLINDRICAL PIECES

Professional Standard - Automobile, Metal Strength Universal Testing Machine

QC/T 558-1999 Destructive test method for bimetal bond strength of automobile engine bearing

YU-JUS, Metal Strength Universal Testing Machine

JUS C.A4.003-1985 Mechanical testing of metals. Hardness test - Brinell test
JUS C.A4.053-1986 Mechanical testing of metals. Determination of transverse rupturestrength of hardmetals
JUS C.A4.034-1985 Mechanical testing of metals. Standardized blocks to be used for Brinell hardness testing machines machines
JUS C.A4.040-1986 Mechanical testing of metals. Hardness test. Vickers test (HV 0,2 to less than HV 5)
JUS C.A4.050-1986 Mechanical testing of meta/s. Vickcrs hardness test of hardmetals
JUS C.A4.030-1986 Mechanical testing of metals. Hardness test Vickers test (HV 5 to HV 100)
JUS C.A4.052-1986 Mechanical testing ofmetals. Rockvell hardness test of hardmetals (ScaleA)
JUS C.A4.099-1995 Mechanical testing of metals - Calibration of standardized for verification of Vickers bardness testing machines: less than HV 0,2
JUS C.A4.098-1995 Mechanical testing of metals - Tables of Vickers hardness values for use in tests made on flat surfaces - Less than HV 0,2
JUS C.A4.051-1986 Mechanical testing of metals. Determination ofapparent hardness of sintered metalmaterials, excluding hardmetals - Materials of essentially uniform section hardness
JUS C.A4.055-1987 Mechanical testing of meta/s. Determination of apparent hardness ofs/nteres metal materials, excluding hardmeta/s. Case-hardened ferrous materials, surface enriched bycarbon orcarbon and nitrogen

CZ-CSN, Metal Strength Universal Testing Machine

CSN 66 8510-1960 Method of test for strength properties of adhesives in shear by tension loading (metal to metal)
CSN 42 0890 Cast.11-1982 Testing of metal powders Strenght determination of pressed compacts

British Standards Institution (BSI), Metal Strength Universal Testing Machine

BS 4656-5:1979 Specification for the accuracy of machine tools and methods of tests - Milling machines, knee and column type, horizontal spindle, universal
BS EN ISO 6506-2:1999 Metallic materials - Brinell hardness test - Verification and calibration of Brinell hardness testing machines
BS EN ISO 6506-2:2014 Metallic materials. Brinell hardness test. Verification and calibration of testing machines
BS EN ISO 6507-2:2006 Metallic materials. Vickers hardness test. Verification and calibration of testing machines
BS EN ISO 6506-2:2005 Metallic materials - Brinell hardness test - Verification and calibration of testing machines
BS EN ISO 4545-2:2006 Metallic materials - Knoop hardness test - Verification and calibration of testing machines
PD ISO/TR 18124:2006 Plastics piping systems. Multilayer M (metal) pipes. Test method for strength of the weld line in the metal layer and bonding between layers by use of a cone
BS EN ISO 14577-2:2015 Metallic materials. Instrumented indentation test for hardness and materials parameters. Verification and calibration of testing machines
BS ISO 14137:2000 Machine tools - Test conditions for wire electrical-discharge machines (wire EDM) - Terminology and testing of the accuracy
BS EN ISO 4516:2002 Metallic and other inorganic coatings - Vickers and Knoop microhardness tests
BS EN ISO 6506-2:2018 Tracked Changes. Metallic materials. Brinell hardness test. Verification and calibration of testing machines
BS EN ISO 4545-2:2017 Tracked Changes. Metallic materials. Knoop hardness test. Verification and calibration of testing machines
BS EN ISO 6507-2:2018 Tracked Changes. Metallic materials. Vickers hardness test. Verification and calibration of testing machines
BS EN ISO 14577-2:2002 Metallic materials. Instrumented indentation test for hardness and materials parameters. Verification and calibration of testing machines
BS 2782-3 Methods 340A and 340B:1978 Methods of testing plastics - Mechanical properties - Determination of shear strength of moulding material - Determination of shear strength of sheet material
BS 2782-3 Method 341A:1977 Methods of testing plastics - Mechanical properties - Determination of apparent interlaminar shear strength of reinforced plastics
BS EN ISO 6508-2:2015 Tracked Changes. Metallic materials. Rockwell hardness test. Verification and calibration of testing machines and indenters
BS EN 14024:2004 Metal profiles with thermal barrier - Mechanical performance - Requirements, proof and tests for assessment
BS EN ISO 6508-2:1999 Metallic materials - Rockwell hardness test - Verification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, N , T)
BS EN ISO 6508-2:2006 Metallic materials - Rockwell hardness test - Verification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, N, T)
BS EN 14651:2005 Test method for metallic fibre concrete - Measuring the flexural tensile strength (limit of proportionality (LOP), residual)
BS EN ISO/ASTM 52941:2020 Additive manufacturing. System performance and reliability. Acceptance tests for laser metal powder-bed fusion machines for metallic materials for aerospace application
BS IEC 62047-38:2021 Semiconductor devices. Micro-electromechanical devices. Test method for adhesion strength of metal powder paste in MEMS interconnection
BS EN 10109-2:1996 Metallic Materials - Hardness Test - Part 2: Verification of Rockwell Hardness Testing Machines (Scales A, B, C, D, E, F, G, H, K, N, T)
22/30462546 DC BS EN ISO 6508-2. Metallic materials. Rockwell hardness test - Part 2. Verification and calibration of testing machines and indenters
BS EN 14651:2005+A1:2007 Test method for metallic fibre concrete - Measuring the flexural tensile strength (limit of proportionality (LOP), residual)
BS EN 14651:2005+A1:2007(2008) Test method for metallic fibre concrete - Measuring the flexural tensile strength (limit of proportionality (LOP), residual)
BS EN ISO 13123:2011 Metallic and other inorganic Coatings. Test method of cyclic heating for thermal barrier coatings under temperature gradient
BS 131-7:1998 Notched bar tests - Specification for verification of the test machine used for precision determination of Charpy V-notch impact energies for metals
BS EN 10109-3:1996 Metallic Materials - Hardness Test - Part 3: Calibration of Standardized Blocks to Be Used for Rockwell Hardness Testing Machines (Scales A, B, C, D, E, F, G, H, K, N, T)
BS EN 60811-501:2012+A1:2018 Electric and optical fibre cables. Test methods for non-metallic materials - Mechanical tests. Tests for determining the mechanical properties of insulating and sheathing compounds
BS EN 61747-5-3:2010 Liquid crystal display devices - Environmental, endurance and mechanical test methods - Glass strength and reliability
BS 2782-3 Methods 320A to 320F:1976 Methods of testing plastics - Mechanical properties - Tensile strength, elongation and elastic modulus
BS 7448-3:2005 Fracture mechanics toughness tests - Part 3.Method for determination of fracture toughness of metallic materials at rates of increase in stress intensity factor greater than 3.0 MPa m0.5 s-1
BS 903-A21.1:1997 Physical testing of rubber. Determination of rubber to metal bond strength. Adhesion to rigid substrates. 90 peel method
BS EN 60811-512:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Mechanical tests. Methods specific to polyethylene and polypropylene compounds. Tensile strength and elongation at break after conditioning at elevated temperature
DD ENV 820-1-1994 Advanced technical ceramics. Methods of testing monolithic ceramics. Thermo-mechanical properties. Determination of flexural strength at elevated temperatures

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Metal Strength Universal Testing Machine

GB/T 34104-2017 Metallic materials—Verification of the alignment of testing machines
GB/T 17737.308-2018 Coaxial communication cables—Part 1-308: Mechanical test methods—Test for tensile strength and elongation for copper-clad metals

BE-NBN, Metal Strength Universal Testing Machine

NBN A 11-105-1974

Association Francaise de Normalisation, Metal Strength Universal Testing Machine

NF X10-011:1958 Strength of materials and mechanical tests of materials. Vocabulary.
NF C26-213:1989 Mechanical endurance functional tests for electrical insulation systems
NF E60-140:2000 Machine tools - Test conditions for wire electrical discharge machines (wire EDM) - Terminology and testing of the accuracy.
NF A03-150-2:2006 Metallic materials - Knoop hardness test - Part 2 : verification and calibration of testing machines.
NF A03-032:1994 METALLIC MATERIALS. BRINELL HARDNESS TEST. PART 2 : VERIFICATION OF BRINELL HARDNESS TESTING MACHINES. (EUROPEAN STANDARD EN 10003-2).
NF A03-022:1994 METALLIC MATERIALS. HARDNESS TEST. PART 2 : VERIFICATION OF ROCKWELL HARDNESS TESTING MACHINES (SCALES A, B, C, D, E, F, G, H, K, N, T). (EUROPEAN STANDARD EN 10109-2).
NF A03-152-2*NF EN ISO 6506-2:2018 Metallic materials - Brinell hardness test - Part 2 : verification and calibration of testing machines
NF A03-150-2*NF EN ISO 4545-2:2018 Metallic materials - Knoop hardness test - Part 2 : verification and calibration of testing machines
NF A03-154-2*NF EN ISO 6507-2:2018 Metallic materials - Vickers hardness test - Part 2 : verification and calibration of testing machines
NF A03-154-2:2006 Metallic materials - Vickers hardness test - Part 2 : verification and calibration of testing machines.
NF A03-152-2:2006 Metallic materials - Brinell hardness test - Part 2 : verification and calibration of testing machines.
NF A03-152-2:2014 Metallic materials - Brinell hardness test - Part 2 : verification and calibration of testing machines
NF A03-033:1994 METALLIC MATERIALS. BRINELL HARDNESS TEST. PART 3 : CALIBRATION OF STANDARDIZED BLOCKS TO BE USED FOR BRINELL HARDNESS TESTING MACHINES. (EUROPEAN STANDARD EN 10003-3).
NF P98-286:2006 Test relating to pavements - Waterproofing materials for engineering structures - Determination of the fatigue strength of a waterproofing surface course on sheet metal - Negative bending moment fatigue bench test method
NF ISO 2433:2000 Machines-outils - Conditions d'essai des machines à rectifier les surfaces de révolution extérieures et à rectifier universelles à table mobile - Contrôle de la précision
NF A91-118*NF EN ISO 4516:2002 Metallic and other inorganic coatings - Vickers and Knoop microhardness tests.
NF T37-001-26:2014 Coil coated metals - Test methods - Part 26 : resistance to condensation of water
NF A03-153-2*NF EN ISO 6508-2:2015 Metallic materials - Rockwell hardness test - Part 2 : verification and calibration of testing machines and indenters
NF E67-016*NF EN ISO/ASTM 52941:2020 Additive manufacturing - System performance and reliability - Acceptance tests for laser metal powder-bed fusion machines for metallic materials for aerospace application
NF EN 17869:2023 Quincaillerie d'ameublement - Méthodes d'essai pour détermination de la résistance mécanique et rigidité de ferrures d'assemblage de corps de meuble
CWA 15261-3:2005 Measurement uncertainties in mechanical tests on metallic materials - Part 3 : the evaluation of uncertainties in creep testing
CWA 15261-2:2005 Measurement uncertainties in mechanical tests on metallic materials - Part 2 : the evaluation of uncertainties in tensile testing
NF P19-212/IN1*NF EN 14651/IN1:2007 Test method for metallic fibered concrete - Measuring the flexural tensile strength (limit or proportionality (LOP), residual)
NF A03-023:1994 METALLIC MATERIALS. HARDNESS TEST. PART 3 : CALIBRATION OF STANDARDIZED BLOCKS TO BE USED FOR ROCKWELL HARDNESS TESTING MACHINES (SCALES A, B, C, D, E, F, G, H, K, N, T). (EUROPEAN STANDARD EN 10109-3).
NF P19-212*NF EN 14651+A1:2007 Test method for metallic fibered concrete - Measuring the flexural tensile strength (limit or proportionality (LOP), residual).
NF C32-011-501*NF EN 60811-501:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 501 : mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds
CWA 15261-1:2005 Measurement uncertainties in mechanical tests on metallic materials - Part 1 : the evaluation of uncertainties in low-cycle fatigue testing
NF A03-155-2*NF EN ISO 14577-2:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2 : verification and calibration of testing machines
NF A91-209*NF EN ISO 13123:2012 Metallic and other inorganic coatings - Test method of cyclic heating for thermal-barrier coatings under temperature gradient.
NF EN ISO 13123:2012 Revêtements métalliques et autres revêtements inorganiques - Méthode d'essai de cyclage thermique de systèmes barrière thermique sous gradient de température
NF C32-011-501/A1*NF EN 60811-501/A1:2018 Electric and optical fibre cables - Test methods for non-metallic materials - Part 501 : mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds
NF A03-155-2:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2 : verification and calibration of testing machines.
NF EN 60811-512:2012 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 512 : essais mécaniques - Méthodes spécifiques pour les mélanges polyéthylène et polypropylène - Résistance à la traction et allongem...
NF EN 60811-501/A1:2018 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 501 : essais mécaniques - Détermination des propriétés mécaniques des mélanges pour les enveloppes isolantes et les gaines
NF EN 60811-501:2012 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 501 : essais mécaniques - Détermination des propriétés mécaniques des mélanges pour les enveloppes isolantes et les gaines

未注明发布机构, Metal Strength Universal Testing Machine

DIN EN ISO 6507-2 Bei 1:1998 Metallic materials — Vickers hardness test — Part 2: Verification of the hardness testing machines — Recommendations according to the verification and for the performance of the testing machine and the plunger
DIN EN ISO 6507-2:1998 Metallic materials Hardness test according to Vickers Part 2: Testing the testing machines
BS EN ISO 4545-2:2018 Metallicmaterials — Knoop hardness test Part 2 : Verification and calibration of testing machines
BS EN 14024:2023 Metal profiles with thermal barrier — Mechanical performance — Requirements, proof and tests for assessment

Standard Association of Australia （SAA）, Metal Strength Universal Testing Machine

AS 1817.2:2002 Metallic materials - Vickers hardness test - Verification of testing machines
AS 1937.9:1991 Methods of test for sealers and adhesives for automotive purposes - Determination of shear strength of metal-to-metal adhesive
AS ISO/ASTM 52941:2023 Additive manufacturing — System performance and reliability — Acceptance tests for laser metal powder-bed fusion machines for metallic materials for aerospace application

Professional Standard - Petroleum, Metal Strength Universal Testing Machine

SY/T 0041-2012 Standard test method for apparent shear strength of coatings to metal
SY/T 0041-1997 Test method for apparent shear strength of pipeline coatings to metal

Group Standards of the People's Republic of China, Metal Strength Universal Testing Machine

T/CASAS 018-2021 Test method for shear strength of micro and nano metal sintered joints
T/CSTM 00278-2021 Ring compression test method for strength and stress-strain relationship of metallic materials

PL-PKN, Metal Strength Universal Testing Machine

PN H04337-1988 The strength tests of metals The antiseizability test on an Amsler machin?
PN E04160-13-1987 Electric cables Methods of testing Test of the mechanical characteristics of metallic sheaths
PN E04160 ArkusZ11-1973 Electric cables Methods of testing Test of the mechanical characteristics of vires

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Metal Strength Universal Testing Machine

PREN 4522-1998 Aerospace Series Metallic Materials Test Methods Pin-Type Bearing Test of Yield Strength (Edition P1)

International Electrotechnical Commission (IEC), Metal Strength Universal Testing Machine

IEC 61196-1-308:2005 Coaxial communication cables - Part 1-308: Mechanical test methods - Test for tensile strength and elongation for copper-clad metals
IEC 61196-1-308:2012 Coaxial communication cables - Part 1-308: Mechanical test methods - Test for tensile strength and elongation for copper-clad metals
IEC 60811-501:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds
IEC 60811-501:2012/AMD1:2018 Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds
IEC 60811-501:2012+AMD1:2018 CSV Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds
IEC 62047-38:2021 Semiconductor devices - Micro-electromechanical devices - Part 38: Test method for adhesion strength of metal powder paste in MEMS interconnection

ZA-SANS, Metal Strength Universal Testing Machine

SANS 119:1982 Metallic materials - Hardness test - Calibration of standardized blocks to be used for Brinell hardness testing machines
SANS 6506-2:2009 Metallic materials - Brinell hardness test Part 2: Verification and calibration of testing machines
SANS 6506-2:2003 Metalic materials - Brinell hardness test Part 2: Verification and calibration of testing machines
SANS 6507-2:2006 Metallic materials - Vickers hardness test Part 2: Verification and calibration of testing machines
SANS 4516:2008 Metallic and other inorganic coatings - Vickers and Knoop microhardness tests
SANS 6508-2:2003 Metallic materials - Rockwell hardness test Part 2: Verification and calibration of testing machines (scales A,B,C,D,E,F,G,H,K,N,T)
SANS 6508-2:2009 Metallic materials - Rockwell hardness test Part 2: Verification and calibration of testing machines (scales A,B,C,D,E,F,G,H,K,N,T)

TH-TISI, Metal Strength Universal Testing Machine

TIS 2169.2-2004 Vickers hardness test for metallic materials.part 2: verification of testing machines
TIS 2170.2-2004 Brinell hardness test for metallic materials.part 2: verification and calibration of testing machines
TIS 2171.2-2004 Rockwell hardness test for metallic materials.part 2: verification and calibration of testing machines (scales a, b, c, d, e, f, g, h, k, n, t)

European Committee for Standardization (CEN), Metal Strength Universal Testing Machine

EN 10003-2:1994 Metallic Materials - Brinell Hardness Test - Part 2: Verification of Brinell Hardness Testing Machines
EN ISO 6506-2:1999 Metallic Materials - Brinell Hardness Test - Part 2: Verification and Calibration of Testing Machines ISO 6506-2: 1999
EN ISO 6506-2:2014 Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines (ISO 6506-2:2014)
EN ISO 4545-2:2018
EN ISO 6508-2:1999 Metallic Materials - Rockwell Hardness Test - Part 2: Verification and Calibration of Testing Machines (Scales A, B, C, D, E, F, G, H, K, N, T) ISO 6508-2: 1999
prEN 14509-3-2021 Factory-made double skin metal faced insulating sandwich panels - Part 3: Test methods for determining mechanical strength, building physical behaviour and durability
EN ISO 6506-2:2005 Metallic Materials - Brinell Hardness Test - Part 2: Verification and Calibration of Testing Machines ISO 6506-2:2005
EN ISO 4545-2:2005 Metallic materials Knoop hardness test Part 2: Verification and calibration of testing machines
EN ISO 4516:2002 Metallic and Other Inorganic Coatings - Vickers and Knoop Microhardness Tests ISO 4516:2002
EN 10003-3:1994 Metallic Materials - Brinell Hardness Test - Part 3: Calibration of Standardized Blocks to Be Used for Brinell Hardness Testing Machines
EN 14024:2004 Metal profiles with thermal barrier - Mechanical performance - Requirements, proof and tests for assessment
EN ISO 6508-2:2015 Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters
EN 14651:2005+A1:2007 Test method for metallic fibre concrete - Measuring the flexural tensile strength (limit of proportionality (LOP), residual)
prEN ISO 6506-2 rev Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines (ISO 6506-2:2017)
EN 10109-2:1994 Metallic Materials - Hardness Test - Part 2: Verification of Rockwell Hardness Testing Machines (Scales A, B, C, D, E, F, G, H, K, N, T)
prEN 14024-2021 Metal profiles with thermal barrier - Mechanical performance - Requirements, proof and tests for assessment
FprEN 14024 Metal profiles with thermal barrier - Mechanical performance - Requirements, proof and tests for assessment
EN 14651:2005 Test method for metallic fibre concrete - Measuring the flexural tensile strength (limit of proportionality (LOP), residual) Incorporates Amendment A1: 2007
prEN ISO 6508-2 Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters (ISO/DIS 6508-2:2022)
EN 10109-3:1994 Metallic Materials - Hardness Test - Part 3: Calibration of Standardized Blocks to Be Used for Rockwell Hardness Testing Machines (Scales A, B, C, D, E, F, G, H, K, N, T)
prEN ISO 14577-2 rev Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines
EN ISO 14577-2:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines

VN-TCVN, Metal Strength Universal Testing Machine

TCVN 5887-2-2008 Metallic materials.Knoop hardness test.Part 2: Verification and calibration of testing machines
TCVN 256-2-2006 Metallic materials.Brinell hardness test.Part 2:Verification and calibration of testing machines
TCVN 257-2-2007 Metallic materials.Rockwell hardness test.Part 2:Verification and calibration of testing machines(scales A, B, C, D, E, F, G, H, K, N, T )

CEN - European Committee for Standardization, Metal Strength Universal Testing Machine

EN ISO 6506-2:2018 Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines
EN ISO 6508-2:2005 Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines (scales A@ B@ C@ D@ E@ F@ G@ H@ K@ N@ T)
EN ISO 14577-2:2002 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines

European Association of Aerospace Industries, Metal Strength Universal Testing Machine

AECMA PREN 4522-1998 Aerospace Series Metallic Materials Test Methods Pin-Type Bearing Test of Yield Strength Edition P1
AECMA PREN 2591-422-1996 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part 422: Locking Wire Hole Strength Edition P 1

GOSTR, Metal Strength Universal Testing Machine

GOST 9377-1981 Diamond indenters and hammers for metal and alloys hardness testing machines. Specifications

Aerospace, Security and Defence Industries Association of Europe (ASD), Metal Strength Universal Testing Machine

ASD-STAN PREN 4522-1998 Aerospace Series Metallic Materials Test Methods Pin-Type Bearing Test of Yield Strength (Edition P1)
ASD-STAN PREN 2243-4-2001 Aerospace Series Non-Metallic Materials Structural Adhesives Test Method Part 4: Metal-Honeycomb Core Flatwise Tensile Test (Edition P 1)

Danish Standards Foundation, Metal Strength Universal Testing Machine

DS/EN ISO 6506-2:2006 Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines
DS/EN ISO 4545-2:2006 Metallic materials - Knoop hardness test - Part 2: Verification and calibration of testing machines
DS/EN ISO 6507-2:2006 Metallic materials - Vickers hardness test - Part 2: Verification and calibration of testing machines
DS/INF 14:1981 Metallic coatings on metallic substrates — Electrodeposited and chemically deposited coatings — Review of methods available for testing adhesion
DS/ISO/ASTM 52941:2020 Additive manufacturing – System performance and reliability – Acceptance tests for laser metal powder-bed fusion machines for metallic materials for aerospace application
DS/EN ISO 13123:2012 Metallic and other inorganic coatings - Test method of cyclic heating for thermal-barrier coatings under temperature gradient
DS/EN 14024:2005 Metal profiles with thermal barrier - Mechanical performance - Requirements, proof and tests for assessment
DS/EN 14651+A1:2008 Test method for metallic fibre concrete - Measuring the flexural tensile strength (limit of proportionality (LOP), residual)
DS/EN ISO 14577-2:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines
DS/EN 60811-501:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds
DS/EN ISO/ASTM 52941:2020 Additive manufacturing – System performance and reliability – Acceptance tests for laser metal powder-bed fusion machines for metallic materials for aerospace application (ISO/ASTM 52941:2020)

ES-UNE, Metal Strength Universal Testing Machine

UNE-EN ISO 6507-2:2018 Metallic materials - Vickers hardness test - Part 2: Verification and calibration of testing machines (ISO 6507-2:2018)
UNE-EN ISO 4545-2:2018 Metallic materials - Knoop hardness test - Part 2: Verification and calibration of testing machines (ISO 4545-2:2017)
UNE-EN ISO 6506-2:2019 Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines (ISO 6506-2:2017)
UNE-EN ISO 6508-2:2015 Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters (ISO 6508-2:2015)
UNE-EN ISO 14577-2:2016 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines (ISO 14577-2:2015)
UNE-EN 60811-501:2012/A1:2019 Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds
UNE-EN ISO/ASTM 52941:2021 Additive manufacturing - System performance and reliability - Acceptance tests for laser metal powder-bed fusion machines for metallic materials for aerospace application (ISO/ASTM 52941:2020)

Professional Standard - Machinery, Metal Strength Universal Testing Machine

JB/T 8133.13-1999 Test method for physical-chemical properties of electrical carbon product.Mechanical strength of carbon pile
JB/T 8133.13-2013 Test method for physical-chemical properties of electrical carbon product.Part 13:Mechanical strength of carbon plie

Lithuanian Standards Office , Metal Strength Universal Testing Machine

LST EN ISO 14577-2:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines (ISO 14577-2:2015)
LST EN ISO 6506-2:2015 Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines (ISO 6506-2:2014)
LST EN ISO 6506-2:2006 Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines (ISO 6506-2:2005)
LST EN ISO 4545-2:2006 Metallic materials - Knoop hardness test - Part 2: Verification and calibration of testing machines (ISO 4545-2:2005)
LST EN ISO 6507-2:2006 Metallic materials - Vickers hardness test - Part 2: Verification and calibration of testing machines (ISO 6507-2:2005)
LST EN ISO 6508-2:2015 Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters (ISO 6508-2:2015)
LST EN 14024-2005 Metal profiles with thermal barrier - Mechanical performance - Requirements, proof and tests for assessment
LST EN 14651+A1-2007 Test method for metallic fibre concrete - Measuring the flexural tensile strength (limit of proportionality (LOP), residual)
LST EN ISO 13123:2012 Metallic and other inorganic coatings - Test method of cyclic heating for thermal-barrier coatings under temperature gradient (ISO 13123:2011)
LST EN ISO 14577-2:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines (ISO 14577-2:2002)
LST EN 60811-501-2012 Electric and optical fibre cables - Test methods for non-metallic materials -- Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds (IEC 60811-501:2012)

AT-ON, Metal Strength Universal Testing Machine

OENORM EN 14509-3-2021 Factory-made double skin metal faced insulating sandwich panels - Part 3: Test methods for determining mechanical strength, building physical behaviour and durability
ONORM B 3124 Teil.4-1981 Testing of natural stone; Mechanical properties of rock; Uniaxial tensile strength (Brazilian Test)
ONORM B 3124 Teil.3-1981 Testing of natural stone; Mechanical properties of rock; Uniaxial tensile strength (direct tension test)
OENORM EN 14024-2021 Metal profiles with thermal barrier - Mechanical performance - Requirements, proof and tests for assessment

AENOR, Metal Strength Universal Testing Machine

UNE-EN ISO 6506-2:2015 Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines (ISO 6506-2:2014)
UNE-EN ISO 4545-2:2006 Metallic materials - Knoop hardness test - Part 2: Verification and calibration of testing machines (ISO 4545-2:2005)
UNE-EN ISO 6507-2:2007 Metallic materials - Vickers hardness test - Part 2: Verification and calibration of testing machines (ISO 6507-2:2005)
UNE-EN 14024:2006 Metal profiles with thermal barrier - Mechanical performance - Requirements, proof and tests for assessment
UNE-EN 14651:2007+A1:2008 Test method for metallic fibre concrete - Measuring the flexural tensile strength (limit of proportionality (LOP), residual)
UNE-EN ISO 13123:2012 Metallic and other inorganic coatings - Test method of cyclic heating for thermal-barrier coatings under temperature gradient (ISO 13123:2011)
UNE-EN 60811-501:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Metal Strength Universal Testing Machine

GJB 6467.3-2008 Testing methods for physics capacity of precious metals and their alloys. Part 3: Determination of temperature-resistance property
GJB 6467.2-2008 Testing methods for physics capacity of precious metals and their alloys. Part 2: Determination of temperature-resistance coefficient(0℃～100℃)

IN-BIS, Metal Strength Universal Testing Machine

European Committee for Electrotechnical Standardization（CENELEC）, Metal Strength Universal Testing Machine

EN 60811-501:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds