ZH

RU

ES

pvdf membrane

pvdf membrane, Total:76 items.

In the international standard classification, pvdf membrane involves: Rubber and plastics products, Paints and varnishes, Equipment for the rubber and plastics industries, Products of the chemical industry, Microbiology, Inks. Printing inks, Integrated circuits. Microelectronics, Birth control. Mechanical contraceptives, Electrical accessories, Electromechanical components for electronic and telecommunications equipment, Installations in buildings, Insulating materials, Semiconductor devices, Printed circuits and boards.


Group Standards of the People's Republic of China, pvdf membrane

  • T/CIPR 067-2022 Large flux reinforced PVDF without lined ultrafiltration membrane
  • T/CIPR 067-2023 Large-flux reinforced polyvinylidene fluoride (PVDF) unlined ultrafiltration membrane
  • T/GDPIA 27-2020 Types and basic parameters of polyvinylidene fluoride (PVDF) film tape casting equipment for photovoltaic backplanes

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, pvdf membrane

  • GB/T 1728-1979 Methods of test for drying time of coatings of paints and putties
  • GB/T 30794-2014 Determination of polyvinylidene fluoride (PVDF) content of hot-melt fluorocarbon resin coatings (dry film).Dropping of the melting temperature

国家市场监督管理总局、中国国家标准化管理委员会, pvdf membrane

  • GB/T 1728-2020 Determination of drying time of coating and putty films

International Organization for Standardization (ISO), pvdf membrane

  • ISO 15014:2007 Plastics - Extruded sheets of poly(vinylidene fluoride) (PVDF) - Requirements and test methods
  • ISO 11501:1995 Plastics - Film and sheeting - Determination of dimensional change on heating
  • ISO 8009-8:1985 Reusable rubber contraceptive diaphragms; Part 8 : Determination of twisting during compression of coil spring and flat spring diaphragms
  • ISO 2813:1978 Paints and varnishes; Measurement of specular gloss of non-metallic paint film at 20 degrees, 60 degrees and 85 degrees

British Standards Institution (BSI), pvdf membrane

  • BS ISO 15014:2007 Plastics - Extruded sheets of poly(vinylidene fluoride) (PVDF) - Requirements and test methods
  • BS EN ISO 11501:1996 Plastics - Film and sheeting - Determination of dimensional change on heating - Determination of dimensional change on heating of film and sheeting
  • BS 3900-D13:2000 Methods of test for paints - Optical tests on paint films - Determination of reflection haze on paint films at 20 degrees
  • BS EN ISO 11501:2004 Plastics. Film and sheeting. Determination of dimensional change on heating. Determination of dimensional change on heating of film and sheeting
  • BS 3900-C1:1965 Methods of test for paints - Tests associated with paint film formation - Wet edge time
  • BS EN 62374:2008 Semiconductor devices. Time dependent dielectric breakdown (TDDB) test for gate dielectric films
  • BS EN 62374:2007 Semiconductor devices - Time dependent dielectric breakdown (TDDB) test for gate dielectric films
  • BS EN 61249-8-8:1997 Materials for interconnection structures. Sectional specification set for non-conductive films and coatings. Temporary polymer coatings

German Institute for Standardization, pvdf membrane

  • DIN ISO 15014:2015 Plastics - Extruded sheets of poly(vinylidene fluoride) (PVDF) - Requirements and test methods (ISO 15014:2007)
  • DIN EN 62374:2008-02 Semiconductor devices - Time Dependent Dielectric Breakdown (TDDB) test for gate dielectric films (IEC 62374:2007); German version EN 62374:2007
  • DIN EN 62374:2008 Semiconductor devices - Time Dependent Dielectric Breakdown (TDDB) test for gate dielectric films (IEC 62374:2007); German version EN 62374:2007

(U.S.) Ford Automotive Standards, pvdf membrane

IN-BIS, pvdf membrane

RO-ASRO, pvdf membrane

  • STAS 2875-1975 PAINFTS AND VARNISHES Determination of film drying time
  • STAS 7015-1981 PLASTICS Determination of sheets and films inflamability in sloping position at 45c

National Metrological Technical Specifications of the People's Republic of China, pvdf membrane

RU-GOST R, pvdf membrane

  • GOST 19180-1973 Ion exchange membranes. Method for measuring changes in dimensions on swelling
  • GOST 6591-1973 Printing inks. Method for determination of drying time or film-formation
  • GOST R 52740-2007 Paint materials. Method for determination of film strength while bending around cylindrical mandrel
  • GOST 31974-2012 Paint materials. Method for determination of film strength while bending around cylindrical mandrel
  • GOST 31975-2013 Paints materials. Method for determination of gloss of non-metallic paint films at 20°, 60°and 85°

Korean Agency for Technology and Standards (KATS), pvdf membrane

  • KS M ISO 13803:2021 Paints and varnishes — Determination of haze on paint films at 20°
  • KS M ISO 13803:2016 Paints and varnishes-Determination of reflection haze on paint films at 20°
  • KS M ISO 11501-2014(2019) Plastics — Film and sheeting — Determination of dimensional change on heating
  • KS M ISO 13803:2008 Paints and varnishes-Determination of reflection haze on paint films at 20°
  • KS M ISO 2813:2007 Paints and varnishes-Determination of specular gloss of non-metallic paint films at 20°, 60° and 85°

Jilin Provincial Standard of the People's Republic of China, pvdf membrane

  • DB22/T 3052-2019 Neisseria meningitidis detection real-time fluorescent PCR method

KR-KS, pvdf membrane

SE-SIS, pvdf membrane

  • SIS 18 60 15 E-1973 In the event of any differences in interpretation of this standard the Swedish version shall take precedence over this translation.
  • SIS 18 60 16 E-1973 In the event of any differences in interpretation of this standard the Swedish version shall take precedence over this translation.

Association Francaise de Normalisation, pvdf membrane

  • NF EN ISO 13803:2014 Peintures et vernis - Détermination du voile sur des feuils de peinture à 20 o
  • NF T30-099*NF EN ISO 13803:2014 Paints and varnishes - Determination of reflection haze on paint films at 20 o
  • NF T30-099:2004 Paints and varnishes - Determination of reflection haze on paint films at 20 degrees.
  • NF T54-105*NF EN ISO 11501:2004 Plastics - Film and sheeting - Determination of dimensional change on heating
  • NF C26-936/A1:1983 Méthodes d'essai des vernis isolants - Vérification du temps de séchage à l'air des vernis isolants en couche mince.
  • NF C26-936:1965 Méthodes d'essai des vernis isolants - Vérification du temps de séchage à l'air des vernis isolants en couche mince.
  • NF EN 62374:2008 Dispositifs à semiconductors - Essai de rupture diélectrique en fonction du temps (TDDB) pour films diélectriques de grille
  • NF C96-017*NF EN 62374:2008 Semiconductor devices - Time Dependent Dielectric Breakdown (TDDB) test for gate dielectric films

Danish Standards Foundation, pvdf membrane

  • DS/CECC 265001:2000 Technology Approval Schedule: Film and hybrid integrated circuits
  • DS/EN ISO 11501:2004 Plastics - Film and sheeting - Determination of dimensional change on heating
  • DS 2217:1992 Water quality. Determination of the number of bacteria at 37 Centigrades in swimming pool water. Membran filtration method
  • DS/ISO 2813:1984 Paints and varnishes. Measurement of specular gloss of non-metallic paint films at 20 degrees, 60 degrees and 85 degrees

Professional Standard - Military and Civilian Products, pvdf membrane

  • WJ 2356-1995 Vacuum coating with time quota for special process of optical parts

AENOR, pvdf membrane

  • UNE-EN ISO 13803:2015 Paints and varnishes - Determination of haze on paint films at 20o (ISO 13803:2014)

American Society for Testing and Materials (ASTM), pvdf membrane

  • ASTM F1661-09(2015) Standard Test Method for Determining the Contact Bounce Time of a Membrane Switch
  • ASTM F1595-00(2005) Standard Practice for Viewing Conditions for Visual Inspection of Membrane Switches
  • ASTM F1595-00(2012) Standard Practice for Viewing Conditions for Visual Inspection of Membrane Switches

American National Standards Institute (ANSI), pvdf membrane

  • ANSI B109.1-2000 Diaphragm-Type Gas Displacement Meters (Under 500 Cubic Feet Per Hour Capacity)
  • ANSI B109.2-2000 Diaphragm-Type Gas Displacement Meters (500 Cubic Feet Per Hour Capacity and Over)

VN-TCVN, pvdf membrane

  • TCVN 2101-2008 Paints and varnishes.Determination of specular gloss of non-metallic paint films at 20 degrees,60 degrees and 85 degrees

American Gas Association, pvdf membrane

  • AGA B109.1-2000 Diaphragm Type Gas Displacement Meters (under 500 Cubic Feet Per Hour Capacity) Fourth Edition; XQ0008
  • AGA B109.2-2000 Diaphragm Type Gas Displacement Meters (500 Cubic Feet per Hour Capacity and over) Fourth Edition; XQ0009

European Committee for Electrotechnical Standardization(CENELEC), pvdf membrane

  • EN 62374:2007 Semiconductor devices - Time Dependent Dielectric Breakdown (TDDB) test for gate dielectric films

International Electrotechnical Commission (IEC), pvdf membrane

  • IEC 62374:2007 Semiconductor devices - Time dependent dielectric breakdown (TDDB) test for gate dielectric films

Lithuanian Standards Office , pvdf membrane

  • LST EN 62374-2008 Semiconductor devices - Time Dependent Dielectric Breakdown (TDDB) test for gate dielectric films (IEC 62374:2007)




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved