ZH
RU
ES

Other Inspection Optical Measurements

Other Inspection Optical Measurements, Total:491 items.

In the international standard classification, Other Inspection Optical Measurements involves: Fibre optic communications, Animal feeding stuffs, Manufacturing forming processes, Protection of and in buildings, Optical equipment, Ferroalloys, Ferrous metals, Medical equipment, Linear and angular measurements, Optoelectronics. Laser equipment, Acoustics and acoustic measurements, Surface treatment and coating, Quality, Optics and optical measurements, Vocabularies, Fuels, Electronic components in general, Crude petroleum, Metalliferous minerals, Coals, Mining equipment, Fasteners for aerospace construction, Solar energy engineering, Paper and board, Paper products, Testing of metals, Company organization and management, Petroleum products in general, Water quality, Cinematography, Organic chemicals, Textile fibres, Lubricants, industrial oils and related products, Astronomy. Geodesy. Geography, Non-ferrous metals, Paint ingredients, Soil quality. Pedology, Farming and forestry, Radiation protection, Edible oils and fats. Oilseeds, Glass, General methods of tests and analysis for food products, Materials for aerospace construction, Fertilizers, Metrology and measurement in general, Photography, Microbiology, Protection against crime, Aerospace electric equipment and systems, Electrical and electronic testing, Processes in the food industry, Laboratory medicine, Ceramics, Veterinary medicine, Semiconducting materials, Furniture, Food products in general.


Illuminating Engineering Society of North America, Other Inspection Optical Measurements

American National Standards Institute （ANSI), Other Inspection Optical Measurements

  • ANSI/EIA/TIA 455-3A:1989 Procedure to Measure Temperature Cycling Effects on Optical Fiber, Optical Cable, and Other Passive Fiber Optic Components
  • ANSI/TIA-455-3B-2009 Procedure to Measure Temperature Cycling Effects on Optical Fiber Units, Optical Cable, and Other Passive Fiber Optic Components
  • ANSI/TIA/EIA 455-173-1990 Coating Geometry Measurement for Optical Fiber Side View Method
  • ANSI/TIA-455-227-2002 FOTP-227-IEC 61300- Fiber Optic Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-24: Examinations and Measurements - Keying Accuracy of Optical Connectors for Polarization Maintaining Fibre

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Other Inspection Optical Measurements

  • GB/T 23182-2008 Procedure for veterinary drug and other chemicals determination in feeds
  • GB/T 25134-2010 Optical measurement specification of 3D geometry for forgings/stampings and the dies
  • GB/T 17674-1999 Determination of nitrogen in petroleum and petroleum products by chemiluminescence method
  • GB/T 18311.31-2007 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-31 : Examinations and measurements Coupled power ratio measurement for fibre optic sources
  • GB/T 6730.87-2023 Determination of iron ore total iron and other multi-element content wavelength dispersive X-ray fluorescence spectrometry (cobalt internal standard method)
  • GB/T 16857.8-2022 Geometrical product specifications (GPS)—Acceptance and reverification tests for coordinate measuring systems (CMS)—Part 8: CMMs with optical distance sensors
  • GB/T 12690.19-1990 Rare-earth metals and their oxides--Determination of iron content--1,10-phenanthroline spectrophotometric method
  • GB/T 18311.1-2003 Fibre optic interconnecting devices and passive components-Basic test and measurement procedures-Part 3-1:Examinations and measurements-Visual examination
  • GB/T 18311.2-2001 Fibre optic interconnecting devices and passive components--Basic test and measurement procedures--Part 3-2: Examinations and measurements--Polarization dependence of a single--mode fibre optic device
  • GB/T 18311.20-2007 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-20: Examinations and measurements irectivity of fibre optic branching devices
  • GB/T 41805-2022 Methodology for the quantitative inspection of the defect on optics surface—Microscopic scattering dark-field imaging
  • GB/T 18311.26-2007 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-26: Examinations and measurements Measurement of the angular misalignment between fibre and ferrule axes
  • GB/T 12690.29-2000 Rare earth metals and their oxide Determination of cerium oxide content-Fluorescent spectrophotometric method
  • GB/T 12690.7-2003 Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides-Determination of silicon content-Molybdenum blue spectrophotometric method
  • GB/T 12690.24-1990 Rare-earth metals and their oxides--Determination of aluminum content--Aluminum-chromazurol S-hexadecyl-trimethyl ammonium bromide-ethanol spectrophotometric method
  • GB/T 12690.10-2003 Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides-Determination of phosphorus content by molybdenum blue spectrophotometric method
  • GB/T 12690.16-1990 Rare-earth metals and their oxides--Determination of calcium content--Flame atomic absorption spectrometric method
  • GB/T 18876.1-2002 Standard practice for determining the metallographical constituent and inclusion content of steels and other metals by automatic image analysis-Part 1: Determining the inclusion or second-phase constituent content of steels and other metals by automatic
  • GB/T 18311.4-2003 Fibre optic interconnecting devices and passive components-Basic test and measurement procedures-Part 3-4:Examinations and measurements-Attenuation
  • GB/T 17248.3-1999 Acoustics--Noise emitted by machinery and equipment--Measurement of emission sound pressure levels at a work station and at other specified positions--Survey method in situ
  • GB/T 17248.5-1999 Acoustics--Noise emitted by machinery and equipment--Measurement of emission sound pressure levels at a work station and at other specified positions--Method requiring environmental corrections
  • GB/T 18311.40-2003 Fibre optic interconnecting devices and passive components-Basic test and measurement procedures-Part 3-40:Examinations and measurements-Extinction ratio of a polarization maintaining(pm)fibre pigtailed connector
  • GB/T 18311.30-2007 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-30: Examinations and measurements Polish angle and fibre position on single ferrule multifibre connectors
  • GB/T 18311.16-2007 Fibre optic interconnecting devices and passive components- Basic test and measurement procedures-Part 3-16: Examinations and measurements-Endface radius of spherically polished ferrules
  • GB/T 18311.6-2001 Fibre optic interconnecting devices and passive components--Basic test and measurement procedures--Part 3-6: Examinations and measurements--Return loss
  • GB/T 18311.28-2007 Fibre optic interconnecting devices and passive components.Basic test and measurement procedures.Part 3-28:Examinations and measurements.Transient loss
  • GB/T 18311.3-2001 Fibre optic interconnecting devices and passive components--Basic test and measurement procedures--Part 3-3: Examinations and measurements--Monitoring change in attenuation and in return loss (multiple paths)
  • GB/T 25228-2010 Inspection of grain and oil.Determination of fumonisins in corn and its products by high liquid chromatography and fluorometer with immunoaffinity column cleanup

Korean Agency for Technology and Standards (KATS), Other Inspection Optical Measurements

  • KS F 2864-2002(2007) Measurement of the reverberation time of rooms with reference to the other acoustical parameters
  • KS F 2864-2012(2017) Measurement of the reverberation time of rooms with reference to the other acoustical parameters
  • KS F 2864-2012(2022) Measurement of the reverberation time of rooms with reference to the other acoustical parameters
  • KS D ISO 4158-2002(2022) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS D ISO 4139-2002(2022) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS D ISO 10698-2002(2022) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS D ISO 10697-2-2002(2022) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS D ISO 10697-1-2002(2022) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS D ISO 4159-2002(2022) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS D ISO 15353-2002(2022) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS D ISO 10701-2002(2022) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS D ISO 13902-2002(2022) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS D ISO 10702-2002(2022) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS D ISO 10280-2002(2022) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS P ISO 8596-2006(2016) Ophthalmic optics－Visual acuity testing－Standard optotype and its presentation
  • KS E ISO 11534-2007(2017) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS E ISO 728-2002(2017) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS E ISO 10203-2007(2017) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS D ISO 10702-2002(2017) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS E ISO 10086-2-2007(2017) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS E ISO 13312-2007(2017) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS E ISO 4687-1-2007(2017) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS D ISO 4829-1-2002(2017) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS E ISO 561-2007(2017) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS D ISO 10280-2002(2017) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS E ISO 10208-2002(2017) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS E ISO 10204-2007(2017) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS E ISO 925-2007(2017) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS E ISO 1017-2007(2017) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS E ISO 5418-1-2007(2017) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS E ISO 20905-2007(2017) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS D ISO 10698-2002(2017) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS E ISO 4689-2007(2017) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS D ISO 10701-2002(2017) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS E ISO 10207-2002(2017) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS E ISO 15239-2007(2017) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS D ISO 15353-2002(2017) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS E ISO 8865-2002(2017) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS E ISO 616-2002(2017) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS E ISO 4688-1-2007(2017) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS E ISO 8858-3-2007(2017) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS E ISO 11422-2002(2017) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS E ISO 13313-2007(2017) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS D ISO 10697-1-2002(2017) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS E ISO 8263-2007(2017) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS E ISO 8858-2-2007(2017) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS E ISO 349-2002(2017) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS E ISO 5069-2-2007(2017) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS E ISO 8858-1-2007(2017) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS D ISO 10697-2-2002(2017) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS E ISO 15585-2007(2017) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS E ISO 8264-2007(2017) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS D ISO 15724:2004 Metallic and other inorganic coatings-Electrochemical measurement of diffusible hydrogen in steels-Barnacle electrode method
  • KS D ISO 15724:2015 Metallic and other inorganic coatings-Electrochemical measurement of diffusible hydrogen in steels-Barnacle electrode method
  • KS D ISO 15724-2015(2020) Metallic and other inorganic coatings－Electrochemical measurement of diffusible hydrogen in steels－Barnacle electrode method
  • KS E ISO 8263-2007(2022) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS E ISO 20905-2007(2022) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS E ISO 8858-2-2007(2022) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS E ISO 5069-2-2007(2022) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS E ISO 8858-3-2007(2022) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS E ISO 8264-2007(2022) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS E ISO 10086-2-2007(2022) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS E ISO 15239-2007(2022) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS D ISO 3868-2002(2022) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS E ISO 4687-1-2007(2022) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS E ISO 561-2007(2022) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS E 3732-1987(2022) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS E ISO 5069-1-2007(2022) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS E ISO 4689-2007(2022) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS E 3701-2002(2022) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS E ISO 10086-1-2007(2022) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS D ISO 10111:2012 Metallic and other inorganic coatings－Measurement of mass per unit area－Review of gravimetric and chemical analysis methods
  • KS D ISO 10111-2012(2022) Metallic and other inorganic coatings－Measurement of mass per unit area－Review of gravimetric and chemical analysis methods
  • KS D ISO 10111-2012(2017) Metallic and other inorganic coatings－Measurement of mass per unit area－Review of gravimetric and chemical analysis methods
  • KS D ISO 3868:2002 Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS A ISO 7832:2003 Cinematography－Photoelectric output factor of photographic－type audio－level test films－Measurement and calibration
  • KS C IEC 61300-3-36-2002(2022) Fibre optic interconnecting devices and passive components－Basic test and measurement procedures－Part 3－36：Examination and measurements－Measurement methods for the inside and outside diameters of fibr
  • KS C IEC 61300-3-36-2002(2017) Fibre optic interconnecting devices and passive components－Basic test and measurement procedures－Part 3－36：Examination and measurements－Measurement methods for the inside and outside diameters of fibr
  • KS I ISO 14238:2008 Soil quality-Biological methods-Determination of nitrogen mineralization and nitrification in soils and the influence of chemicals on these processes
  • KS C IEC 61300-3-36:2002 Fibre optic interconnecting devices and passive components－Basic test and measurement procedures－Part 3－36：Examination and measurements－Measurement methods for the inside and outside diameters of fibre optic connector ferrules
  • KS C IEC 61300-3-20:2004 Fibre optic interconnecting devices and passive components-Basic test and measurement procedures-Part 3-20:Examinations and measurements-Directivity of fibre optic branching devices
  • KS C IEC 61300-3-20:2014 Fibre optic interconnecting devices and passive components — Basic test and measurement procedures — Part 3-20: Examinations and measurements — Directivity of fibre optic branching devices
  • KS C IEC 61300-3-24-2008(2018) Fibre optic interconnecting devices and passive components－Basic test and measurement procedures－Part 3-24：Examinations and measurements－Keying accuracy of optical connectors for polarization maintain
  • KS C IEC 61300-3-26:2004 Fibre optic interconnecting devices and passive components-Basic test and measurement procedures-Part 3-26:Examinations and measurements-Measurement of the angular misalignment between fibre and ferrule axes
  • KS C IEC 61300-3-24:2008 Fibre optic interconnecting devices and passive components－Basic test and measurement procedures－Part 3-24：Examinations and measurements－Keying accuracy of optical connectors for polarization maintaining fibre
  • KS C IEC 61300-3-6:2004 Fibre optic interconnecting devices and passive components-Basic test and measurement procedures-Part 3-6:Examinations and measurements-Return loss
  • KS C IEC 61300-3-28:2004 Fibre optic interconnecting devices and passive components-Basic test and measurement procedures-Part 3-28:Examinations and measurements-Transient loss
  • KS C IEC 61300-3-16:2004 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures-Part 3-16: Examinations and measurements-Endface radius of spherically polished ferrules
  • KS C IEC 61300-3-30:2004 Fibre optic interconnecting devices and passive components-Basic test and measurement procedures-Part 3-30:Examinations and measurements-Polish angle and fibre position on single ferrule multifibre connectors
  • KS C IEC 61300-3-30:2014 Fibre optic interconnecting devices and passive components — Basic test and measurement procedures — Part 3-30: Examinations and measurements — Polish angle and fibre position on single ferrule multifibre connectors
  • KS B ISO 11204:2007 Acoustics-Noise emitted by machinery and equipment-Measurement of emission sound pressure levels at a work station and at other specified positions-Method requiring environmental corrections
  • KS B ISO 11204-2007(2017) Acoustics－Noise emitted by machinery and equipment－Measurement of emission sound pressure levels at a work station and at other specified positions－Method requiring environmental corrections
  • KS I ISO 11200:2004 Acoustics-Noise emitted by machinery and equipment-Guidelines for the use of basic standardsfor the determination of emission sound pressurelevels at a work station and at other specified positions
  • KS C IEC 61300-3-5:2008 Fibre optic interconnecting devices and passive components－Basic test and measurement procedures－Part 3-5：Examinations and measurements－Wavelength dependence of attenuation

HU-MSZT, Other Inspection Optical Measurements

BE-NBN, Other Inspection Optical Measurements

  • NBN T 04-006-1983 Formic acid for industrial use - Determination of iron content- 2,2'Bipyridyl photometric method

International Organization for Standardization (ISO), Other Inspection Optical Measurements

  • ISO 10109-7:2001 Optics and optical instruments - Environmental requirements - Part 7: Test requirements for optical measuring instruments
  • ISO 15724:2001 Metallic and other inorganic coatings - Electrochemical measurement of diffusible hydrogen in steels - Barnacle electrode method
  • ISO 22462:2020 Metallic and other inorganic coatings — Test method for the friction coefficient measurement of chemical conversion coatings
  • ISO 3868:1976 Metallic and other non-organic coatings; Measurement of coating thicknesses; Fizeau multiple-beam interferometry method
  • ISO 10111:2019 Metallic and other inorganic coatings — Measurement of mass per unit area — Review of gravimetric and chemical analysis methods
  • ISO 17901-1:2015 Optics and photonics - Holography - Part 1: Methods of measuring diffraction efficiency and associated optical characteristics of holograms
  • ISO 10111:2000 Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods
  • ISO 7832:1987 Cinematography; Photoelectric output factor of photographic-type audio-level test films; Measurement and calibration
  • ISO 7832:2014 Cinematography - Photoelectric output factor of photographic-type audio-level test films - Measurement and calibration
  • ISO 9342-1:2005 Optics and optical instruments - Test lenses for calibration of focimeters - Part 1: Test lenses for focimeters used for measuring spectacle lenses
  • ISO 9342-2:2005 Optics and optical instruments - Test lenses for calibration of focimeters - Part 2: Test lenses for focimeters used for measuring contact lenses
  • ISO 14238:1997 Soil quality - Biological methods - Determination of nitrogen mineralization and nitrification in soils and the influence of chemicals on these processes
  • ISO 28057:2019 Clinical dosimetry — Dosimetry with solid thermoluminescence detectors for photon and electron radiations in radiotherapy
  • ISO 11202:1995 Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Survey method in situ
  • ISO 11433:1993/Amd 1:2013 Nickel alloys - Determination of titanium content - Diantipyrylmethane molecular absorption spectrometric method - Amendment 1: Alternative procedure for the preparation of the titanium standard solution
  • ISO 11202:1995/Cor 1:1997 Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Survey method in situ; Technical Corrigendum 1
  • ISO 11204:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections
  • ISO 11200:1995 Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions
  • ISO 11204:1995 Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Method requiring environmental corrections
  • ISO 11200:2014 Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions

Association of German Mechanical Engineers, Other Inspection Optical Measurements

  • VDI/VDE/DGQ 2618 Blatt 6.1-2009 Inspection of measuring and test equipment - Test instruction for optical flats and optical parallels
  • VDI/VDE 2617 Blatt 6.1-2007 Accuracy of coordinate measuring machines - Characteristics and their testing - Coordinate measuring machines with optical probing - Code of practice for the application of DIN EN ISO 10360 to coordinate measuring machines with optical sensors for lateral
  • VDI/VDE 2617 Blatt 10.1-2014 Accuracy of coordinate measuring machines - Characteristics and their checking - Laser trackers with multiple probing systems
  • VDI/VDE 2617 Blatt 6.2-2005 Accuracy of coordinate measuring machines - Characteristics and their testing - Guideline for the application of DIN EN ISO 10360 to coordinate measuring machines with optical distance sensors
  • VDI/VDE 2617 Blatt 10-2011 Accuracy of coordinate measuring machines - Characteristics and their checking - Acceptance and reverification tests of lasertrackers

German Institute for Standardization, Other Inspection Optical Measurements

  • DIN 51855-7:1986-12 Testing of gaseous fuels and other gases; determination of the content of sulfur compounds; gaschromatographic determination of the content of odoriferous sulfur compounds using an electrochemical detector
  • DIN EN ISO 24013:2007 Optics and photonics - Lasers and laser-related equipment - Measurement of phase retardation of optical components for polarized laser radiation (ISO 24013:2006); English version of DIN EN ISO 24013:2007-02
  • DIN EN ISO 3868:1995-01 Metallic and other non-organic coatings - Measurement of coating thicknesses - Fizeau multiple-beam interferometry method (ISO 3868:1976); German version EN ISO 3868:1994
  • DIN 51855-8:1997-06 Testing of gaseous fuels and other gases - Determination of sulfur compounds content - Part 8: Gaschromatographic determination of dihydrogen sulfide, carbonyl sulfide and other sulfur compounds using specific detectors
  • DIN V 32938:1998 Surface profiling by means of optical microscopic methods - Concepts and measurement procedures
  • DIN 51865-1:1998 Testing of gaseous fuels and other gases - Determination of mercury content - Part 1: Chemisorption on Iodine, atomic absorption spectrometry (AAS)
  • DIN 51865-3:1998 Testing of gaseous fuels and other gases - Determination of mercury content - Part 3: Absorption in solutions, atomic absorption spectrometry (AAS)
  • DIN 18723-4:1990 Field procedure for precision testing of surveying instruments; optical distance measuring instruments
  • DIN ISO 21338:2022-10 Water quality - Kinetic determination of the inhibitory effects of sediment, other solids and coloured samples on the light emission of Vibrio fischeri (kinetic luminescent bacteria test) (ISO 21338:2010)
  • DIN ISO 21338:2022 Water quality - Kinetic determination of the inhibitory effects of sediment, other solids and coloured samples on the light emission of Vibrio fischeri (kinetic luminescent bacteria test) (ISO 21338:2010)
  • DIN EN ISO 10111:2019-04 Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods (ISO 10111:2019); German version EN ISO 10111:2019
  • DIN EN ISO 10111:2019 Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods (ISO 10111:2019)
  • DIN 51399-1:2017 Testing of lubricants - Determination of elements content in additives, wear and other contaminations - Part 1: Direct determination by optical emission spectral analysis with inductively coupled plasma (ICP OES)
  • DIN 51399-1:2009 Testing of lubricants - Determination of elements content in additives, wear and other contaminations - Part 1: Direct determination by optical emission spectral analysis with inductively coupled plasma (ICP OES)
  • DIN EN 61300-3-32:2007-04 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-32: Examinations and measurements - Polarisation mode dispersion measurement for passive optical components (IEC 61300-3-32:2006); German versio...
  • DIN EN ISO 10111:2018 Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods (ISO/DIS 10111:2018); German and English version prEN ISO 10111:2018
  • DIN 18723-6:1990 Field procedure for precision testing of surveying instruments; electro-optical distance measuring instruments for short ranges
  • DIN ISO 21338:2016 Water quality - Kinetic determination of the inhibitory effects of sediment, other solids and coloured samples on the light emission of Vibrio fischeri (kinetic luminescent bacteria test) (ISO 21338:2010); Text in German and English
  • DIN EN ISO 9342-1:2005 Optics and optical instruments - Test lenses for calibration of focimeters - Part 1: Test lenses for focimeters used for measuring spectacle lenses (ISO 9342-1:2005); German version EN ISO 9342-1:2005
  • DIN EN 61300-3-31:2003 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-31: Examinations and measurements; Coupled power ratio measurement for fibre optic sources (IEC 61300-3-31:2003); German version EN 61300-3-31:2003
  • DIN 5031-11:2011 Optical radiation physics and illuminating engineering - Part 11: Radiometer for measuring actinic radiant quantities - Terms, characteristics and their classification
  • DIN EN 61300-3-32:2007 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-32: Examinations and measurements - Polarisation mode dispersion measurement for passive optical components (IEC 61300-3-32:2006); German version E
  • DIN 51444:2003 Testing of petroleum products - Determination of nitrogen - Oxidative combustion method with chemiluminescence detector
  • DIN EN 62150-4:2010-08 Fibre optic active components and devices - Test and measurement procedures - Part 4: Relative intensity noise using a time-domain optical detection system (IEC 62150-4:2009); German version EN 62150-4:2010
  • DIN EN IEC 61300-3-55:2022-09 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-55: Examinations and measurements - Polarisation extinction ratio and keying accuracy of polarisation maintaining, passive, optical components (...
  • DIN 58959-6 Beiblatt 2:2022-07 Medical microbiology - Quality management in medical microbiology - Part 6: Requirements relating to test organisms and their use in performance testing; Supplement 2: Recommended test organisms for frequently used testing reagents, dyes and biological...
  • DIN 6856-2:1995 Film viewing boxes and viewing conditions - Part 2: Quality control in medical diagnostic; test method, measuring instruments
  • DIN EN 61300-3-24:2007 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-24: Examinations and measurements - Keying accuracy of optical connectors for polarization maintaining fibre (IEC 61300-3-24:2006); German version
  • DIN EN ISO 13395:1996-12 Water quality - Determination of nitrite nitrogen and nitrate nitrogen and the sum of both by flow analysis (CFA and FIA) and spectrometric detection (ISO 13395:1996); German version EN ISO 13395:1996
  • DIN 51399-2:2010-01 Testing of lubricants - Determination of elements content of additives, wear and other contaminations - Part 2: Wavelength dispersive X-ray fluorescence spectrometry (XRF)
  • DIN EN 61300-3-10:2007 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-10: Examinations and measurements - Gauge retention force (IEC 61300-3-10:2006); German version EN 61300-3-10:2007
  • DIN EN IEC 61300-3-55:2021 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-55: Examinations and measurements - Polarisation extinction ratio and keying accuracy of polarisation maintaining, passive, optical components (IEC
  • DIN EN 61300-3-20:2002 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-20: Examinations and measurements; Directivity of fibre optic branching devices (IEC 61300-3-20:2001); German version EN 61300-3-20:2001
  • DIN EN 61300-3-17:2000 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-17: Examinations and measurements; endface angle of angle-polished ferrules (IEC 61300-3-17:1999); German version EN 61300-3-17:1999
  • DIN EN IEC 61189-2-720:2022-09 Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 2-720: Detection of defects in interconnection structures by measurement of capacitance (IEC 91/1786/CD:2022); Text in German and English / ...
  • DIN EN IEC 61189-2-720:2022 Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 2-720: Detection of defects in interconnection structures by measurement of capacitance (IEC 91/1786/CD:2022); Text in German and English
  • DIN EN 62788-1-2:2017 Measurement procedures for materials used in photovoltaic modules - Part 1-2: Encapsulants - Measurement of volume resistivity of photovoltaic encapsulants and other polymeric materials (IEC 62788-1-2:2016); German version EN 62788-1-2:2016
  • DIN 51865-2:2000 Testing of gaseous fuels and other gases - Determination of mercury content - Part 2: Combustion using the modified Lingener method; Atomic absorption spectrometry (AAS)
  • DIN 58984-1:1984 Special laboratory medicine; determination of inorganic substances in serum, plasma, urine and other body fluids; determination of calcium by atomic absorption spectrometry
  • DIN 51083-9:1990 Testing of ceramic materials; chemical analysis of alumosilicates; photometric determination of the phosphorus-V-oxid content
  • DIN 51399-1:2017-02 Testing of lubricants - Determination of elements content in additives, wear and other contaminations - Part 1: Direct determination by optical emission spectral analysis with inductively coupled plasma (ICP OES)
  • DIN 50455-1:1991 Testing of materials for semiconductor technology; methods for characterizing photoresists; determination of coating thickness with optical methods
  • DIN 51855-7:1986 Testing of gaseous fuels and other gases; determination of the content of sulfur compounds; gaschromatographic determination of the content of odoriferous sulfur compounds using an electrochemical detector
  • DIN 51855-6:2000-09 Testing of gaseous fuels and other technical gases - Determination of sulfur compounds content - Part 6: Content of hydrogen sulfide, mercaptan sulfur and carbonylsulfide sulfur; potentiometric method
  • DIN EN 61300-3-50:2014 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-50: Examinations and measurements - Crosstalk for optical spatial switches (IEC 61300-3-50:2013); German version EN 61300-3-50:2013
  • DIN EN ISO 9342-2:2006 Optics and optical instruments - Test lenses for calibration of focimeters - Part 2: Test lenses for focimeters used for measuring contact lenses (ISO 9342-2:2005);English version of DIN EN ISO 9342-2:2006-02
  • DIN EN 61300-3-37:2006 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-37: Examinations and measurements - Endface angle of angle-polished optical fibres (IEC 61300-3-37:2005); German version EN 61300-3-37:2005
  • DIN EN 61300-3-29:2006 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-29: Examinations and measurements - Measurement techniques for characterizing the amplitude of the spectral transfer function of DWDM components (I

GOSTR, Other Inspection Optical Measurements

  • GOST R 58372-2019 Optics and photonics. Lasers and laser-related equipment. Methods for determination of laser-induced damage threshold. Part 4. Inspection, detection and measurement

RU-GOST R, Other Inspection Optical Measurements

  • GOST 30683-2000 Noise of machines. Measurement of emission sound pressure levels at a work station and at other specified positions. Method requiring environmental corrections
  • GOST 4.448-1986 Product-quality index system. Optical instruments for angular measurements. Nomenclature of indices
  • GOST R 8.744-2011 State system for ensuring the uniformity of measurements. Optics and photonics. Interferometric measurement of optical elements and optical systems. Part 3. Calibration and validation of interferometric test equipment and measurements
  • GOST 4.447-1986 Product-quality index system. Optical instruments for linear measurements. Nomenclature of indices
  • GOST 8.514-1984 State system for ensuring the uniformity of measurements. State verification schedule for means measuring irradiance in spectrosensitomentry in the wavelength range of 0.2-1.4 um
  • GOST R ISO 1833-3-2008 Textiles. Quantitative chemical analysis. Part 3. Mixtures of acetate and certain other fibres (method using acetone)
  • GOST R ISO 9342-1-2013 Optics and optical instruments. Test lenses for calibration of focimeters. Part 1. Test lenses for focimeters used for measuring spectacle lenses
  • GOST R ISO 9342-2-2013 Optics and optical instruments. Test lenses for calibration of focimeters. Part 2. Test lenses for focimeters used for measuring contact lenses
  • GOST R 56341-2015 Aromatic hydrocarbons and related chemicals. Determination of total sulfur by method of ultraviolet fluorescence
  • GOST 8.336-1978 State system for ensuring the uniformity of measurements. IZM type optical mechanical length measuring machines. Methods and means of calibration
  • GOST 8.661-2018 State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring surface flatness parameters of optical surfaces up to 200 mm
  • GOST R 54420-2011 Ophthalmic optics. Metal and combination spectacle frames. Method for the simulation of wear and detection of nickel release
  • GOST 8.499-1984 State system for ensuring the uniformity of measurements. State verification schedule for means of measurement of illumination effective time of exposure and colour temperature in sensitometry
  • GOST 31650-2012 Medical remedies for animals, feed and feed additives. Detection of mass fraction of mercury by atom absorbtion spectrometric method
  • GOST 30255-1995 Furniture, timber and polymers. Method for determination of formaldehyde and other volatile chemicals in the air of climatic chambers
  • GOST 31651-2012 Medical remedies for animals, feed and feed additives. Detection of mass fraction of selenium by atom absorbtion spectrometric method

TIA - Telecommunications Industry Association, Other Inspection Optical Measurements

  • TSB-62-1993 Informative Test Methods (ITMs) for Fiber-Optic Fibers@ Cables@ Opto-Electronic Sources and Detectors@ Sensors@ Connecting and Terminating Devices@ and Other Fiber-Optic Components
  • TSB62-1993 Informative Test Methods (ITMs) for Fiber-Optic Fibers@ Cables@ Opto-Electronic Sources and Detectors@ Sensors@ Connecting and Terminating Devices@ and Other Fiber-Optic Components
  • TIA/EIA-455-3A-1989 FOTP-3 Procedure to Measure Temperature Cycling Effects on Optical Fibers@ Optical Cable@ and Other Passive Fiber Optic Components (Replaces RS-455-52)

Lithuanian Standards Office , Other Inspection Optical Measurements

  • LST EN ISO 3868:2001 Metallic and other non-organic coatings - Measurement of coating thicknesses - Fizeau multiple-beam interferometry method (ISO 3868:1976)
  • LST EN ISO 10111:2003 Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods (ISO 10111:2000)
  • LST EN 61300-3-32-2007 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-32: Examinations and measurements - Polarization mode dispersion measurement for passive optical components (IEC 61300-3-32:2006)
  • LST EN 62150-4-2010 Fibre optic active components and devices - Test and measurement procedures - Part 4: Relative intensity noise using a time-domain optical detection system (IEC 62150-4:2009)
  • LST EN 61300-3-29-2014 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-29: Examinations and measurements - Spectral transfer characteristics of DWDM devices (IEC 61300-3-29:2014)
  • LST EN 61300-3-4-2013 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-4: Examinations and measurements - Attenuation (IEC 61300-3-4:2012)

AENOR, Other Inspection Optical Measurements

  • UNE-EN ISO 3868:1996 METALLIC AND OTHER NON-ORGANIC COATINGS. MEASUREMENT OF COATING THICKNESSES. FIZEAU MULTIPLE-BEAM INFERFEROMETRY METHOD. (ISO 3868:1976).
  • UNE-EN 62788-1-2:2017 Measurement procedures for materials used in photovoltaic modules - Part 1-2: Encapsulants - Measurement of volume resistivity of photovoltaic encapsulants and other polymeric materials
  • UNE-EN ISO 10111:2002 Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods. (ISO 10111:2000)
  • UNE-EN 61300-3-32:2007 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-32: Examinations and measurements - Polarization mode dispersion measurement for passive optical components (IEC 61300-3-32:2006).

National Metrological Verification Regulations of the People's Republic of China, Other Inspection Optical Measurements

  • JJG 754-1991 Verification Regulation of Optical Transfer Function Measuring Equipment
  • JJG(铁道) 150-1994 Verification Regulation of Optical Instrument for the Height and off Center Deviation of Contact Wire

(U.S.) Telecommunications Industries Association , Other Inspection Optical Measurements

  • TIA-455-3B-2009 FOTP-3 Procedure to Measure Temperature Cycling Effects on Optical Fiber Units, Optical Cable, and Other Passive Fiber Components

British Standards Institution (BSI), Other Inspection Optical Measurements

  • BS 6200-3.16.3:1991 Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of lead - Steel: spectrophotometric method for trace amounts
  • BS ISO 17901-1:2015 Optics and photonics. Holography. Methods of measuring diffraction efficiency and associated optical characteristics of holograms
  • BS EN 62788-1-2:2016 Measurement procedures for materials used in photovoltaic modules. Encapsulants. Measurement of volume resistivity of photovoltaic encapsulants and other polymeric materials
  • BS ISO 22462:2020 Metallic and other inorganic coatings. Test method for the friction coefficient measurement of chemical conversion coatings
  • BS EN ISO 3868:1995 Metallic and other non-organic coatings - Measurement of coating thicknesses - Fizeau multiple-beam interferometry method
  • BS EN ISO 12625-7:2014 Tissue paper and tissue products. Determination of optical properties. Measurement of brightness and colour with D65/10 (outdoor daylight)
  • BS EN 61300-3-50:2013 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Crosstalk for optical spatial switches
  • BS 6200-3.22.3:1986 Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of nitrogen. Steel: spectrophotometric method (for trace amounts)
  • BS EN 61300-3-32:2006 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Polarization mode dispersion measurement for passive optical components
  • 19/30362396 DC BS ISO 22462. Metallic and other inorganic coatings. Test methods of friction coefficient measurement of chemical conversion coatings
  • BS EN ISO 9342-2:2006 Optics and optical instruments - Test lenses for calibration of focimeters - Test lenses for focimeters used for measuring contact lenses
  • BS EN ISO 9342-2:2005 Optics and optical instruments - Test lenses for calibration of focimeters - Test lenses for focimeters used for measuring contact lenses
  • BS 6200-3.11.2:1991 Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of cobalt - Steel, irons and steelmaking materials: spectrophotometric method for trace amounts
  • BS EN 61300-3-37:2005 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Endface angle of angle- polished optical fibres
  • BS EN ISO 10111:2019 Tracked Changes. Metallic and other inorganic coatings. Measurement of mass per unit area. Review of gravimetric and chemical analysis methods
  • BS EN 61300-3-35:2015 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Visual inspection of fibre optic connectors and fibre-stub transceivers
  • BS EN 62150-4:2010 Fibre optic active components and devices - Test and measurement procedures - Relative intensity noise using a time-domain optical detection system
  • BS EN 61300-3-24:2007 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Keying accuracy of optical connectors for polarization maintaining fibre
  • BS 5706:1979 Methods for the determination of thiosulphate and other residual chemicals in processed photographic films, plates and papers: methylene blue photometric method and silver sulphide densitometric method
  • BS EN ISO 9342-1:2005 Optics and optical instruments - Test lenses for calibration of focimeters - Test lenses for focimeters used for measuring spectacle lenses
  • BS EN 61300-3-4:2013 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Attenuation
  • DD ENV 12260-1996 Water quality. Determination of nitrogen. Determination of bound nitrogen, after combustion and oxidation to nitrogen dioxide, using chemiluminescence detection
  • BS EN IEC 61300-3-55:2020 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures - Examinations and measurements. Polarisation extinction ratio and keying accuracy of polarisation maintaining, passive, optical components
  • BS EN 61300-3-1:2005 Fire optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-1: Examinations and measurements - Visual examination
  • BS EN 61300-3-1:2006 Fire optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Visual examination
  • BS 6200 SubSec.3.22.3:1986 Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of nitrogen. Steel: spectrophotometric method (for trace amounts)
  • BS EN 61300-3-29:2014 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Spectral transfer characteristics of DWDM devices
  • BS 684-2.50:2000 Methods of analysis of fats and fatty oils. Other methods. Determination of cadmium content by direct graphite furnace atomic absorption spectrometry
  • BS EN 61300-3-33:1999 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Examinations and measurements - Ferrule withdrawal force - Ferrule withdrawal force
  • BS 6200-3.26.3:1987 Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of silicon - Steel and cast iron: spectrophotometric method for silicon contents from 0.05% (m/m) to 1.0% (m/m)
  • BS 5551-4.1.4:1984 Fertilizers. Chemical analysis. Determination of nitrogen. Method for determination of ammoniacal nitrogen content in the presence of other substances which release ammonia when treated with sodium hydroxide (titrimetric method)
  • BS 6200-3.33.2:1992 Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of tungsten - Steel: spectrophotometric method
  • BS EN 61300-3-39:2012 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Physical contact (PC) optical connector reference plug selection for return loss measurements
  • BS EN 61300-3-17:2000 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Endface angle of angle-polished ferrules - Examinations and measurements - Endface angle of angle-polished ferrules
  • BS EN 2591-206:1996 Elements of electrical and optical connection - Test methods - Measurements of insulation resistance
  • BS EN 61300-3-2:2009 Fibre optic interconnecting devices and passive components — Basic test and measurement procedures — Part 3-2: Examinations and measurements — Polarization dependent loss in a single-mode fibre optic device
  • BS 6200-3.26.4:1989 Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of silicon - Steel and cast iron: spectrophotometric method for silicon contents from 0.01% (m/m) to 0.05% (m/m)
  • BS 6200-3.1.2:1991 Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of aluminium - Steel and cast iron: spectrophotometric method
  • BS 6200-3.34.2:1989 Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of vanadium - Steel and cast iron: spectrophotometric method
  • 18/30382939 DC BS EN 61300-3-55. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-55. Examinations and measurements. Polarisation extinction ratio and keying accuracy of polarisation maintaining, passive, optic...
  • BS EN 61300-3-51:2014 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Pin gauge withdrawal force for rectangular ferrule multi-fibre connectors
  • 22/30455094 DC BS EN 61189-2-720. Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 2-720. Detection of defects in interconnection structures by measurement of capacitance
  • BS EN 61300-3-14:2014 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Error and repeatability of the attenuation settings of a variable optical attenuator
  • BS 6200-3.10.2:1990 Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of chromium. Steel and cast iron: flame atomic absorption spectrometric method
  • BS 6200 SubSec.3.11.2:1991 Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of cobalt. Steel, irons and steelmaking materials: spectrophotometric method for trace amounts
  • BS 6200-3.24.2:1992 Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of phosphorus - Ferrochromium, ferromanganese and ferromolybdenum: spectrophotometric method
  • BS 6200 SubSec.3.26.3:1987 Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of silicon. Steel and cast iron: spectrophotometric method for silicon contents from 0.05% (m/m) to 1.0% (m/m)
  • BS 6200-3.40.3:1997 Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Multi-element methods. Determination of nickel, copper and cobalt contents by inductively coupled plasma atomic emission spectrometric method. Determination of copper c...
  • BS 6200-3.40.2:1997 Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Multi-element methods. Determination of nickel, copper and cobalt contents by inductively coupled plasma atomic emission spectrometric method. Determination of nickel c...
  • BS 6200-3.40.4:1997 Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Multi-element methods. Determination of nickel, copper and cobalt contents by inductively coupled plasma atomic emission spectrometric method. Determination of cobalt c...

Association Francaise de Normalisation, Other Inspection Optical Measurements

  • NF EN ISO 3868:1995 Revêtements métalliques et autres revêtements non organiques - Mesurage de l'épaisseur - Méthode basée sur le principe de Fizeau d'interférométrie à faisceaux multiples.
  • NF EN ISO 11554:2017 Optique et photonique - Lasers et équipements associés aux lasers - Méthodes d'essai de la puissance et de l'énergie des faisceaux lasers et de leurs caractéristiques temporelles
  • NF C93-903-31*NF EN 61300-3-31:2003 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-31 : examinations and measurements - Coupled power ratio measurement for fibre optic sources.
  • NF EN ISO 10111:2019 Revêtements métalliques et autres revêtements inorganiques - Mesurage de la masse surfacique - Présentation des méthodes d'analyse gravimétrique et chimique
  • NF A91-125*NF EN ISO 10111:2019 Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods
  • NF A91-117*NF EN ISO 3868:1995 Metallic and other non-organic coatings. Measurement of coating thicknesses. Fizeau multiple-beam interferometry method.
  • NF C57-788-1-2*NF EN 62788-1-2:2016 Measurement procedures for materials used in photovoltaic modules - Part 1-2 : encapsulants - Measurement of volume resistivity of photovoltaic encapsulants and other polymeric materials
  • NF EN 62788-1-2:2016 Procédures de mesure des matériaux utilisés dans les modules photovoltaïques - Partie 1-2 : encapsulants - Mesurage de la résistivité transversale des encapsulants photovoltaïques et autres matériaux polymères
  • NF EN ISO 8596:2018 Optique ophtalmique - Mesure de l'acuité visuelle - Optotype normalisé et optotypes cliniques et leur présentation
  • NF Q34-030-7:2014 Tissue paper and tissue products - Part 7 : determination of optical properties - Measurement of brightness and colour with D65/10o (outdoor daylight)
  • NF C93-903-50*NF EN 61300-3-50:2013 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-50 : examinations and measurements - Crosstalk for optical spatial switches
  • NF EN 61300-3-32:2006 Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 3-32 : examens et mesures - Mesures de la dispersion de mode de polarisation pour composants optiques passifs
  • NF S12-134-1*NF EN ISO 9342-1:2005 Optics and optical instruments - Test lenses for calibration of focimeters - Part 1 : test lenses for focimeters used for measuring spectacle lenses.
  • NF S12-134-2*NF EN ISO 9342-2:2006 Optics and optical instruments - Test lenses for calibration of focimeters - Part 2 : test lenses for focimeters used for measuring contact lenses.
  • NF C93-903-37*NF EN 61300-3-37:2005 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-37 : examinations and measurements - Endface angle of angle-polished optical fibres
  • NF C93-903-1*NF EN 61300-3-1:2006 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-1 : examinations and measurements - Visual examination
  • NF C93-903-24*NF EN 61300-3-24:2007 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-24 : examinations and measurements - Keying accuracy of optical connectors for polarization maintaining fibre
  • NF EN IEC 61300-3-55:2020 Dispositifs d'interconnexion et composants passifs fibroniques - Procédures fondamentales d'essais et de mesures - Partie 3-55 : examens et mesures - Rapport d'extinction de polarisation et précision du détrompage des composants optiques passifs ...
  • NF C93-845-4*NF EN 62150-4:2015 Fibre optic active components and devices - Test and measurement procedures - Part 4 : Relative intensity noise using a time-domain optical detection system
  • NF EN 62150-4:2015 Composants et dispositifs actifs à fibres optiques - Procédures d'essais et de mesures - Partie 4 : Intensité relative du bruit en utilisant un système de détection optique dans le domaine temporel
  • NF C93-903-32*NF EN 61300-3-32:2006 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-32 : examinations and measurements - Polarisation mode dispersion measurement for passive optical components
  • NF C93-903-6*NF EN 61300-3-6:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-6 : examinations and measurements - Return loss
  • NF EN ISO 8596/A1:2020 Optique ophtalmique - Mesure de l'acuité visuelle - Optotype normalisé et optotypes cliniques et leur présentation - Amendement 1
  • NF C93-903-55*NF EN IEC 61300-3-55:2020 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-55 : examinations and measurements - Polarisation extinction ratio and keying accuracy of polarisation maintaining, passive, optical components
  • NF C93-903-24:2000 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-24 : examinations and measurements - Keying accuracy of optical connectors for polarization maitaining fibre.
  • NF C93-903-29:2006 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-29 : examinations and measurements - Measurement techniques for characterizing the amplitude of the spectral transfer function of DWDM components.
  • NF C93-903-20*NF EN 61300-3-20:2004 Fibres optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-20 : examinations and measurements - Directivity of fibre optic branching devices.
  • NF C93-903-29*NF EN 61300-3-29:2014 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-29 : examinations and measurements - Spectral transfer characteristics of DWDM devices
  • NF C93-903-10*NF EN 61300-3-10:2007 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-10 : examinations and measurements - Gauge retention force
  • NF C93-903-2*NF EN 61300-3-2:2014 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-2 : examination and measurements - Polarisation dependent loss in a single-mode fibre optic device
  • NF C93-903-16*NF EN 61300-3-16:2004 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-16 : examinations and measurements - Endface radius of spherically polished ferrules
  • NF C93-903-39:1998 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-39 : tests. Examinations and measurements. PC optical connector reference plug selection.
  • NF C93-903-15*NF EN 61300-3-15:2007 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-15 : examinations and measurements - Dome eccentricity of a convex polished ferrule endface
  • NF S31-504*NF EN ISO 11204:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections

Military Standard of the People's Republic of China-General Armament Department, Other Inspection Optical Measurements

  • GJB 8677-2015 Calibration procedures for infrared optical transfer function measuring devices
  • GJB 452.2-1988 Optical camouflage performance of camouflage clothing and its inspection method Measurement method of camouflage clothing and background visible light and near infrared brightness coefficient

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Other Inspection Optical Measurements

  • IEEE P1652/D10.5-2016 Translating Head and Torso Simulator Measurements from Eardrum to Other Acoustic Reference Points
  • IEEE P1652/D10.3-2016 Translating Head and Torso Simulator Measurements from Eardrum to Other Acoustic Reference Points

Electronic Components, Assemblies and Materials Association, Other Inspection Optical Measurements

  • ECA TEP105-9-1987 Line Profile Measurements in Shadow Mask and Other Structured Screen Cathode Ray Tubes

Danish Standards Foundation, Other Inspection Optical Measurements

  • DS/EN ISO 3868:1995 Metallic and other non-organic coatings - Measurement of coating thicknesses - Fizeau multiple-beam interferometry method
  • DS/EN ISO 10111:2002 Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods
  • DS/ISO 21338:2011 Water quality - Kinetic determination of the inhibitory effects of sediment, other solids and coloured samples on the light emission of Vibrio fischeri (kinetic luminescent bacteria test)
  • DS/EN 61300-3-32:2007 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-32: Examinations and measurements - Polarization mode dispersion measurement for passive optical components
  • DS/EN 62150-4:2010 Fibre optic active components and devices - Test and measurement procedures - Part 4: Relative intensity noise using a time-domain optical detection system

未注明发布机构, Other Inspection Optical Measurements

  • BS EN ISO 3868:1995(1999) Metallic and other non - organic coatings — Measurement of coating thicknesses — Fizeau multiple - beam interferometry method
  • DIN EN ISO 11202:1996 Acoustics — Noise emitted by machinery and equipment — Measurement of emission sound pressure levels at a work station and at other specified positions, survey method in situ
  • VDI VDE 2617 Blatt 6-2-2021 Accuracy of coordinate measuring machines Parameters and their testing Guidelines for the application of DIN EN ISO 10360-8 for coordinate measuring machines with optical distance sensors
  • VDI VDE 2617 Blatt 12-2-2023 Accuracy of coordinate measuring machines Characteristics and their testing Acceptance and confirmation tests of coordinate measuring machines for the optical measurement of microgeometries based on DIN EN ISO 10360-8 and VDI/VDE 2617 Sheet 6.2 Accuracy o
  • DIN EN ISO 11204:1996 Acoustics – Sound radiation from machines and devices D IN Measurement of emission sound pressure levels at the workplace and other specified locations Methods with environmental corrections
  • BS EN ISO 6888-3:2003(2006) Microbiology offood and animal feeding stuffs — Horizontal method for the enumeration of coagulase - positive staphylococci (Staphylococcusaureus and other species) — Part 3 : Detection and MPN technique for low numbers

ES-UNE, Other Inspection Optical Measurements

  • UNE-EN ISO 10111:2020 Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods (ISO 10111:2019)
  • UNE-EN IEC 61300-3-55:2020 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-55:Examinations and measurements - Polarisation extinction ratio and keying accuracy of polarisation maintaining, passive, optical components (E...
  • UNE-EN 62150-4:2010 Fibre optic active components and devices - Basic test and measurement procedures -- Part 4: Relative intensity noise using a time-domain optical detection system (Endorsed by AENOR in May of 2010.)
  • UNE-EN ISO 6888-3:2003/AC:2005 Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) - Part 3: Detection and MPN technique for low numbers (ISO 6888-3:2003)

International Electrotechnical Commission (IEC), Other Inspection Optical Measurements

  • IEC 62150-4:2009 Fibre optic active components and devices - Test and measurement procedures - Part 4: Relative intensity noise using a time-domain optical detection system
  • IEC PAS 61300-3-43:2006 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-43: Examinations and measurements - Mode transfer function measurement for fibre optic sources
  • IEC 61300-3-43:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-43: Examinations and measurements - Mode transfer function measurement for fibre optic sources
  • IEC 62788-1-2:2016 Measurement procedures for materials used in photovoltaic modules - Part 1-2: Encapsulants - Measurement of volume resistivity of photovoltaic encapsulants and other polymeric materials
  • IEC 61300-3-31:2003 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-31: Examinations and measurements; Coupled power ratio measurement for fibre optic sources
  • IEC 61300-3-50:2013 Fibre optic interconnecting devices and passive components.Basic test and measurement procedures.Part 3-50: Examinations and measurements.Crosstalk for optical spatial switches
  • IEC 61300-3-37:2005 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-37: Examinations and measurements - Endface angle of angle-polished optical fibres
  • IEC 61300-3-50:2013/COR1:2015 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-50: Examinations and measurements - Crosstalk for optical spatial switches
  • IEC 61300-3-13:1995 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-13: Examinations and measurements - Control stability of a fibre optic switch
  • IEC 61300-3-1:1995 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-1: Examinations and measurements - Visual examination
  • IEC 61300-3-1:2005 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-1: Examinations and measurements - Visual examination
  • IEC 61300-3-35:2015 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-35: Examinations and measurements - Visual inspection of fibre optic connectors and fibre-stub transceivers
  • IEC 61300-3-32:2006 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-32: Examinations and measurements - Polarization mode dispersion measurement for passive optical components
  • IEC 61300-3-20:2001 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-20: Examinations and measurements; Directivity of fibre optic branching devices
  • IEC 61300-3-50:2013/COR2:2015 Corrigendum 2 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-50: Examinations and measurements - Crosstalk for optical spatial switches
  • IEC 61300-3-35:2022 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-35: Examinations and measurements - Visual inspection of fibre optic connectors and fibre-st
  • IEC 61300-3-8:1995 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-8: Examinations and measurements - Ambient light susceptibility
  • IEC 61300-3-36:2000 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-36: Examinations and measurements - Measurement methods for the inside and outside diameters of fibre optic connector ferrules
  • IEC 61300-3-2:1999 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-2: Examinations and measurements - Polarization dependence of attenuation in a single-mode fibre optic device
  • IEC 61300-3-35:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-35: Examinations and measurements - Fibre optic connector endface visual and automated inspection
  • IEC 61300-3-4:2001 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-4: Examinations and measurements; Attenuation
  • IEC 61300-3-10:1995 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-10: Examinations and measurements - Gauge retention force
  • IEC 61300-3-10:2006 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-10: Examinations and measurements - Gauge retention force
  • IEC 61300-3-2:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-2: Examination and measurements - Polarization dependent loss in a single-mode fibre optic device
  • IEC 61300-3-29:2005 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-29: Examinations and measurements - Measurement techniques for characterizing the amplitude of the spectral transfer function of DWDM components
  • IEC PAS 61300-3-29:2002 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-29: Examinations and measurements; Measurement techniques for characterizing the amplitude of the spectral transfer function of DWDM components
  • IEC 61300-3-29:2014 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-29: Examinations and measurements - Spectral transfer characteristics of DWDM devices
  • IEC 61300-3-21:2014 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-21: Examinations and measurements - Switching time
  • IEC 61300-3-6:2008 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-6: Examinations and measurements - Return loss
  • IEC 61300-3-6:2005 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-6: Examinations and measurements - Return loss
  • IEC 61300-3-21:2019 RLV Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-21: Examinations and measurements - Switching time
  • IEC 61300-3-55:2020 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-55:Examinations and measurements - Polarisation extinction ratio and keying accuracy of pola
  • IEC 61300-3-33:1999 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-33: Examinations and measurements - Ferrule withdrawal force
  • IEC 61300-3-39:1997 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-39: Examinations and measurements - PC optical connector reference plug selection
  • IEC 61300-3-40:1998 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-40: Examinations and measurements - Extinction ratio of a polarization maintaining (pm) fibre pigtailed connector
  • IEC 61300-3-17:1999 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-17: Examinations and measurements - Endface angle of angle-polished ferrules
  • IEC 61300-3-23:1998 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-23: Examination and measurements; fibre position relative to ferrule endface
  • IEC 61300-3-16:2004 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-16: Examinations and measurements - Endface radius of spherically polished ferrules
  • IEC 61300-3-15:2006 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-15: Examinations and measurements - Dome eccentricity of a convex polished ferrule endface
  • IEC 61300-3-53:2020 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-53: Examinations and measurements - Encircled angular flux (EAF) measurement method based on
  • IEC 61300-3-53:2020 RLV Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-53: Examinations and measurements - Encircled angular flux (EAF) measurement method based on
  • IEC 61300-3-5:2000 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-5: Examinations and measurements; Wavelength dependence of attenuation
  • IEC 61300-3-11:1995 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-11: Examinations and measurements - Engagement and separation forces
  • IEC 61300-3-5:2004 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-5: Examinations and measurements - Wavelength dependence of attenuation
  • IEC 61300-3-30:2004 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-30: Examinations and measurements - Polish angle and fibre position on single ferrule multifibre connectors
  • IEC 61300-3-21:1998 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-21: Examinations and measurements; switching time and bounce time

Group Standards of the People's Republic of China, Other Inspection Optical Measurements

  • T/GSEA 002-2023 Testing method for power quality of electrochemical energy storage-photovoltaic system

CEN - European Committee for Standardization, Other Inspection Optical Measurements

  • EN ISO 10111:2019 Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods

American Society for Testing and Materials (ASTM), Other Inspection Optical Measurements

  • ASTM E2163-06 Standard Guide for Minimum Training Requirements for Examiners Conducting Psychophysiological Detection of Deception (PDD) Testing of Sex Offenders in Treatment, Probation or Other Similar Programs
  • ASTM UOP981-10 Trace Nitrogen in Liquid Hydrocarbons by Oxidative Combustion with Chemiluminescence Detection
  • ASTM D5176-91(2003) Standard Test Method for Total Chemically Bound Nitrogen in Water by Pyrolysis and Chemiluminescence Detection
  • ASTM D5176-91(1995) Standard Test Method for Total Chemically Bound Nitrogen in Water by Pyrolysis and Chemiluminescence Detection
  • ASTM D5176-08 Standard Test Method for Total Chemically Bound Nitrogen in Water by Pyrolysis and Chemiluminescence Detection
  • ASTM UOP981-14 Trace Nitrogen in Liquid Hydrocarbons by Oxidative Combustion with Chemiluminescence Detection
  • ASTM UOP981-11 Trace Nitrogen in Liquid Hydrocarbons by Oxidative Combustion with Chemiluminescence Detection
  • ASTM D5176-08(2015) Standard Test Method for Total Chemically Bound Nitrogen in Water by Pyrolysis and Chemiluminescence Detection
  • ASTM B767-88(2021) Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
  • ASTM D464-15(2020) Standard Test Methods for Saponification Number of Pine Chemical Products Including Tall Oil and Other Related Products
  • ASTM E2119-20 Standard Practice for Quality Systems for Conducting In Situ Measurements of Lead Content in Paint or Other Coatings Using Field-Portable X-Ray Fluorescence (XRF) Devices
  • ASTM E2119-16 Standard Practice for Quality Systems for Conducting In Situ Measurements of Lead Content in Paint or Other Coatings Using Field-Portable X-Ray Fluorescence (XRF) Devices
  • ASTM D4629-10 Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection
  • ASTM D4629-12 Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Other Inspection Optical Measurements

  • GB/T 34100-2017 Test method for determination of total sulfur in light hydrocarbons，spark ignition engine fuel ,diesel engine fuel, and engine oil—Ultraviolet fluorescence method

Professional Standard - Petrochemical Industry, Other Inspection Optical Measurements

  • SH/T 0689-2000 Standard test method for determination of total sulfur in light hydrocarbons,motor fuels and oils by ultraviolet fluorescence

Institute of Electrical and Electronics Engineers (IEEE), Other Inspection Optical Measurements

  • IEEE 1652-2016 IEEE Standard for Translating Head and Torso Simulator Measurements from Eardrum to Other Acoustic Reference Points
  • IEEE Std 1652-2016 IEEE Standard for Translating Head and Torso Simulator Measurements from Eardrum to Other Acoustic Reference Points
  • IEEE P1652/D10.3, January, 2016 IEEE Draft Standard for Translating Head and Torso Simulator Measurements from Eardrum to Other Acoustic Reference Points
  • P1652/D10.3, January, 2016 IEEE Draft Standard for Translating Head and Torso Simulator Measurements from Eardrum to Other Acoustic Reference Points
  • IEEE P1652/D10.5, April 2016 IEEE Approved Draft Standard for Translating Head and Torso Simulator Measurements from Eardrum to Other Acoustic Reference Points

European Committee for Standardization (CEN), Other Inspection Optical Measurements

  • EN ISO 3868:1994 Metallic and Other Non- Organic Coatings - Measurement of Coating Thicknesses - Fizeau Multiple-Beam Interferometry Method (ISO 3868 : 1976)
  • EN ISO 10111:2001 Metallic and Other Inorganic Coatings - Measurement of Mass Per Unit Area - Review of Gravimetric and Chemical Analysis Methods ISO 10111:2000
  • EN ISO 11204:2009 Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Method requiring environmental corrections
  • EN ISO 9342-2:2005 Optics and optical instruments - Test lenses for calibration of focimeters - Part 2: Test lenses for focimeters used for measuring contact lenses (ISO 9342-2:2005)
  • EN 61300-3-6:2003 Fibre optic interconnecting devices and passive components — Basic test and measurement procedures — Part 3-6: Examinations and measurements — Return loss
  • EN 61300-3-33:1999 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-33: Examinations and measurements - Ferrule withdrawal force
  • EN ISO 11202:1995 Acoustics - Noise Emitted by Machinery and Equipment - Measurement of Emission Sound Pressure Levels at a Work Station and at Other Specified Positions - Survey Method in Situ (ISO 11202 : 1995)
  • EN ISO 11204:1995 Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Method requiring environmental corrections
  • EN ISO 9342-1:2005 Optics and optical instruments Test lenses for calibration of focimeters Part 1: Test lenses for focimeters used for measuring spectacle lenses

European Committee for Electrotechnical Standardization（CENELEC）, Other Inspection Optical Measurements

  • EN 62788-1-2:2016 Measurement procedures for materials used in photovoltaic modules - Part 1-2: Encapsulants - Measurement of volume resistivity of photovoltaic encapsulants and other polymeric materials
  • EN 61300-3-50:2013 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-50: Examinations and measurements - Crosstalk for optical spatial switches
  • EN 62150-4:2010 Fibre optic active components and devices - Test and measurement procedures - Part 4: Relative intensity noise using a time-domain optical detection system
  • EN IEC 61300-3-55:2020 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-55:Examinations and measurements - Polarisation extinction ratio and keying accuracy of polarisation maintaining, passive, optical components
  • EN 61300-3-32:2006 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-32: Examinations and measurements - Polarization mode dispersion measurement for passive optical components
  • EN 61300-3-6:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-6: Examinations and measurements - Return loss

Universal Oil Products Company (UOP), Other Inspection Optical Measurements

  • UOP 981-2014 Trace Nitrogen in Liquid Hydrocarbons by Oxidative Combustion with Chemiluminescence Detection

TR-TSE, Other Inspection Optical Measurements

  • TS 723-1969 CHEMICAL ANALYSIS OF ALUMINIUM AND ITS ALLOYSELEKTROLYTIC DETERMINATION OF COPPER ?N ALUMINIUM ALLOYS (Copper content greater than or equal to 0,50 %)
  • TS 751-1969 CHEMICAL ANALYSIS OF MAGNESIUM AND ITS ALLOYS PHOTOMETRIC DETERMINATION OF IRON (Orthophenanthroline mcthod applicable to iron Content between 0,002 and 0,05 %)

SE-SIS, Other Inspection Optical Measurements

  • SIS SS 02 52 66-1989 Acoustics — Sound insulation of windows, doors and other facade elements — Supplement to the loudspeaker method described in IS0140/5, Field measurement

YU-JUS, Other Inspection Optical Measurements

  • JUS F.S3.131-1982 Testing (Quantitative analysis) mixtures of fibres. Binary mixtures of fibres. Binary mixturesof acetate and certain other fibres. Acetone method
  • JUS F.S3.140-1982 Testing (Quantitative analysis) mixitures of fibres. Binary mixtures of acrylic, certain modacrylic or certain chlorofibres and certain other fibres. Dimethylformamide method
  • JUS F.S3.144-1982 Testing (Quantitative analysis) mixtures of fibres. Binary mixtures of polypropylene and certain other fibres. Ksilen method
  • JUS F.S3.144/1-1992 Testing (Quantitative analysis) of fibres mixtures. Binary mixtures of polypropylene and cortain other fibres. Xylen method. Amendments
  • JUS F.S3.132-1982 Testing (Quantitative analysis) mixtures of fibres. Binary mixtures of certain protein and certain other fibres. Hypochlorite method
  • JUS F.S3.142-1982 Testing (Quantitative analysis) mixtures of fibres. Binary mixtures of acetate and certain chlorofibres. Glacial acetic acid method
  • JUS F.S3.138-1982 Testing (Quantitative analysis) mixtures of fibres. Binary mixtures of triacetate and certain other fibres. Dichloromethane method
  • JUS F.S3.142/1-1992 Testing (Quantitative analysis) of fibres mixtures. Binary mixtures of acetate and certain chlorofibres. Glacial acetic acid method. Amendments
  • JUS F.S3.135-1982 Testing (Quantitative analysis) meoctures of fibres. Binary mixtures of polyamide 6 or 6.6 and certain other fibres. Formicacid method
  • JUS F.S3.135/1-1992 Testing (Quantitative analysis) of fibres mixtures. Binary mixtures of polyamide 6 or 6.6 and cortain other fibres. Formic acid method. Amendments
  • JUS F.S3.138/1-1992 Testing (Quantitative analysis) of fibres mixtures. Binary mixtures of triacetate and certain other fibres. Dichloromethane method. Amendments
  • JUS F.S3.132/1-1992 Testing (Quantitative analysis) of fibres mixtures. Binary mixtures of certain protein and certain other fibres. Hypochlorite method. Amendments

Japanese Industrial Standards Committee (JISC), Other Inspection Optical Measurements

  • JIS C 61300-3-43:2012 Fiber optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 3-43: Examinations and measurements -- Mode transfer function measurement for fiber optic sources
  • JIS C 61300-3-32:2013 Fiber optic interconnecting devices and passive components.Basic test and measurement procedures.Part 3-32: Examinations and measurements.Polarization mode dispersion measurement for passive optical components
  • JIS C 61300-3-20:2009 Fiber optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 3-20: Examinations and measurements -- Directivity of fiber optic branching devices

Agricultural Standard of the People's Republic of China, Other Inspection Optical Measurements

  • 农业部2259号公告-5-2015 Detection of genetically modified organisms and derived products.Technical guidelines for development of real-time quantitative PCR methods

Indonesia Standards, Other Inspection Optical Measurements

  • SNI 7854-2013 Metode pengujian kadar logam tembaga (Cu), seng (Zn), besi (Fe) dalam daging, telur, susu, dan olahannya dengan menggunakan Spektrofotometer Serapan Atom (SSA)
  • SNI 7853-2013 Metode pengujian kadar logam berat timbal (Pb) dan kadmium (Cd) dalam daging, telur, susu, dan olahannya dengan menggunakan Spektrofotometer Serapan Atom (SSA)

Society of Automotive Engineers (SAE), Other Inspection Optical Measurements

  • SAE AMS2248F-2006 Chemical Check Analysis Limits Corrosion and Heat Resistant Steels and Alloys, Maraging and Other Highly-Alloyed Steels, and Iron Alloys

ZA-SANS, Other Inspection Optical Measurements

  • SANS 6888-3:2005 Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) Part 3: Detection and MPN technique for low numbers
  • SANS 11202:1995 Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Survey method in situ

Manufacturers Standardization Society of the Valve and Fitting Industry (MSS), Other Inspection Optical Measurements

  • MSS SP-94-2008 Quality Standard for Ferritic and Martensitic Steel Castings for Valves, Flanges, Fittings, and Other Piping Components Ultrasonic Examination Method
  • MSS SP-94-1999 Quality Standard for Ferritic and Martensitic Steel Castings for Valves, Flanges, and Fittings and Other Piping Components Ultrasonic Examination Method
  • MSS SP-94-2015 Quality Standard for Ferritic and Martensitic Steel Castings and Forgings for Valves, Flanges, Fittings, and Other Piping Components Ultrasonic Examination Method

IT-UNI, Other Inspection Optical Measurements

国家市场监督管理总局、中国国家标准化管理委员会, Other Inspection Optical Measurements

  • GB/T 37226-2018 Criterion of forensic science human fluorescence STR multiplex amplification reagent

BR-ABNT, Other Inspection Optical Measurements

Professional Standard - Public Safety Standards, Other Inspection Optical Measurements

  • GA/T 815-2009 Criterion for the human fluorescent STR multiplex PCR reagent

MSS - Manufacturers Standardization Society of the Valve and Fittings Industry., Other Inspection Optical Measurements

  • SP-94-2015 Quality Standard for Ferritic and Martensitic Steel Castings and Forgings for Valves@ Flanges@ Fittings@ and Other Piping Components Ultrasonic Examination Method
  • SP-94-2008 Quality Standard for Ferritic and Martensitic Steel Castings for Valves@ Flanges@ Fittings@ and Other Piping Components Ultrasonic Examination Method
  • SP-94-1999 Quality Standard for Ferritic and Martensitic Steel Castings for Valves@ Flanges@ and Fittings and Other Piping Components Ultrasonic Examination Method
  • SP-94-1992 Quality Standard for Ferritic and Martensitic Steel Castings for Valves@ Flanges@ and Fittings and Other Piping Components - Ultrasonic Examination Method

Tianjin Provincial Standard of the People's Republic of China, Other Inspection Optical Measurements

  • DB12/T 651-2016 Real-time fluorescent PCR method for quantitative detection of transgenic herbicide-tolerant soybean GTS40-3-2 and its derivatives

PL-PKN, Other Inspection Optical Measurements

  • PN-EN IEC 61300-3-55-2021-02 E Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-55: Examinations and measurements - Polarisation extinction ratio and keying accuracy of polarisation maintaining, passive, optical components (IEC

CENELEC - European Committee for Electrotechnical Standardization, Other Inspection Optical Measurements

  • EN 61300-3-6:1997 Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures Part 3-6: Examinations and Measurements Return Loss (Incorporates Amendments A1: 1988 and A2: 1999)
  • EN 61300-3-33:2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-33: Examinations and measurements - Withdrawal force from a resilient alignment sleeve using gauge pins

Professional Standard - Agriculture, Other Inspection Optical Measurements

Standard Association of Australia （SAA）, Other Inspection Optical Measurements

  • AS 5013.12.3:2004 Food microbiology - Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) - Detection and MPN technique for low numbers

KR-KS, Other Inspection Optical Measurements

  • KS I ISO 11202-2014 Acoustics — Noise emitted by machinery and equipment — Measurement of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections

Professional Standard - Medicine, Other Inspection Optical Measurements

  • YY/T 1458-2016 Antibodies to thyroid peroxidase quantitative test reagent(chemiluminescent immunoassay)

  Other Inspection Optical Measurements, Detection Optical Measurement.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved