ZH
RU
ES
Compared with the evaluation results
Compared with the evaluation results, Total:72 items.
In the international standard classification, Compared with the evaluation results involves: Metrology and measurement in general, Quality, Civil engineering in general, Vacuum technology, Graphic technology, Services, Test conditions and procedures in general, Home economics in general, Water quality, Thermodynamics and temperature measurements, Aircraft and space vehicles in general, Electrical engineering in general, Surface treatment and coating, Air quality, Fertilizers, Insulating materials, Non-destructive testing, Vibrations, shock and vibration measurements, Bridge construction, Welding, brazing and soldering, Photography, Electricity. Magnetism. Electrical and magnetic measurements, Materials for aerospace construction.
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Compared with the evaluation results
German Institute for Standardization, Compared with the evaluation results
- DIN 58964:2015-09 Quality assurance of POCT results - Assessment criteria for comparison measurement and implementation
- DIN 58964:2015 Quality assurance of POCT results - Assessment criteria for comparison measurement and implementation
- DIN CEN/TS 16490:2013-06*DIN SPEC 10127:2013-06 Fertilizers - Comparison of the CEN/TC 260/WG 7 ring test results with tolerances given in the Regulation (EC) Nr 2003/2003 Annex II and conclusions; German version CEN/TS 16490:2013
- DIN 38402-71:2002 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 71: Equivalance of two analytical methods based on the comparison of results and their statistical evaluation, Procedure for quantitative c
- DIN V 65352:1987 Aerospace; method of statistical evaluation of qualification and acceptance test results for fibre composites
SE-SIS, Compared with the evaluation results
American Welding Society (AWS), Compared with the evaluation results
- WRC 251:1979 Comparison Of Three-Dimensional Finite Element And Photoelastic Results For Lateral Connection, WC-12B2
HU-MSZT, Compared with the evaluation results
Indonesia Standards, Compared with the evaluation results
- SNI 7747-2012 Tata cara perbandingan hasil simulasi model aliran air tanah terhadap informasi lapangan
WRC - Welding Research Council, Compared with the evaluation results
- BULLETIN 251-1979 COMPARISON OF THREE-DIMENSIONAL FINITE ELEMENT AND PHOTELASTIC RESULTS FOR LATERAL CONNECTION@ WC-12B2
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Compared with the evaluation results
- GB/T 34876-2017 Vacuum technology—Vacuum gauges—Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Compared with the evaluation results
- ASHRAE 4177-1998 Quantitative Comparison of North American and U.K. Cooling Load Calculation Procedures - Results (RP-942)
- ASHRAE NA-04-9-2B-2004 Heat Loss from Electrical and Control Equipment in Industrial Plants: Part II - Results and Comparisons (RP-1104)
- ASHRAE 4412-2001 Multiple Model Approach of a Residential Heat Pump for Integration in a Building Thermal Simulation Code and Comparison with Experimental Results
American Society for Testing and Materials (ASTM), Compared with the evaluation results
- ASTM F596-82(1998) Standard Practice for Comparative Evaluation of the Imaging Properties of Dry Electrostatic Toners
- ASTM E2488-09 Standard Guide for the Preparation and Evaluation of Liquid Baths Used for Temperature Calibration by Comparison
- ASTM E2488-09(2014) Standard Guide for the Preparation and Evaluation of Liquid Baths Used for Temperature Calibration by Comparison
- ASTM D5327-97(2007) Standard Practice for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under General Laboratory Conditions
- ASTM D5327-97(2002) Standard Practice for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under General Laboratory Conditions
- ASTM D5327-97(2013) Standard Practice for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under General Laboratory Conditions
- ASTM D5009-02(2017) Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions
IT-UNI, Compared with the evaluation results
- UNI ISO 27893:2020 Vacuum technology -- Vacuum gauges -- Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge
IN-BIS, Compared with the evaluation results
GOSTR, Compared with the evaluation results
- GOST 34348-2017 Vacuum technology. Vacuum gauges. Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge
- GOST R 50779.84-2018 Statistical methods. Uncertainty evaluation of results of two-factor crossed design
Association Francaise de Normalisation, Compared with the evaluation results
- NF X50-006:1993 Supplier/end-user relations. Taking up again of the comparative test results for products.
- NF T90-700*NF EN 16101:2012 Water quality - Guidance standard on interlaboratory comparison studies for ecological assessment
- NF ISO 27893:2013 Technique du vide - Manomètres à vide - Évaluation de l'incertitude des résultats des étalonnages par comparaison directe avec un manomètre de référence
- NF X10-525*NF ISO 27893:2013 Vacuum technology - Vacuum gauges - Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge
- NF X06-047:1986 Application of statistical. Treatment of measured results. Errors estimation from interlaboratory comparaisons.
- XP U42-422*XP CEN/TS 16490:2013 Fertilizers - Comparison of the CEN/TC 260/WG 7 ring test results with tolerances given in the Regulation (EC) Nr 2003/2003 Annex II and conclusions
- NF X43-508*NF EN ISO 14956:2002 Air quality - Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty
- XP CEN/TS 16490:2013 Engrais - Comparaison des résultats des essais interlaboratoires menés par le CEN/TC 260/WG 7 avec les tolérances données dans le règlement (CE) no 2003/2003 Annexe II et conclusions
- NF ISO 3800:2006 Éléments de fixation filetés - Essai de fatigue sous charge axiale - Méthodes d'essais et évaluation des résultats
- NF C26-301:1990 Determination of thermal endurance properties of electrical insulating materials. General guidelines for ageing procedures and evaluation of test results.
International Organization for Standardization (ISO), Compared with the evaluation results
- ISO 27893:2011 Vacuum technology - Vacuum gauges - Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge
- ISO 14956:2002 Air quality - Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty
- ISO 18649:2004 Mechanical vibration - Evaluation of measurement results from dynamic tests and investigations on bridges
- ISO 20462-2:2005/cor 1:2007 Photography - Psychophysical experimental methods for estimating image quality - Part 2: Triplet comparison method; Technical Corrigendum 1
- ISO/TS 27893:2009 Vacuum technology - Vacuum gauges - Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge
ZA-SANS, Compared with the evaluation results
- SANS 5327:1978 Pesticides: Comparative biological evaluation of the susceptibility of two strains of house-flies to insecticides
U.S. Military Regulations and Norms, Compared with the evaluation results
API - American Petroleum Institute, Compared with the evaluation results
- API PUBL 45821-1993 Comparative Evaluation of Biological Treatment of Petroleum Product Terminal Wastewater by the Sequencing Batch Reactor Process and the Rotating Biological Contractor Process Appendices: Analytical Laboratory Results
- API DR79-1984 Development of a Diluting Concentration method for Testing the Acute Toxicity of Chemically Dispersed Oil@ and the Results of Comparative studies (Reprinted in 1993)
FI-SFS, Compared with the evaluation results
Professional Standard - Light Industry, Compared with the evaluation results
- QB/T 3832-1999 Evaluation of the corrosion test results of the metal deposits for the light industrial products
Danish Standards Foundation, Compared with the evaluation results
- DS/CEN/TS 16490:2013 Fertilizers - Comparison of the CEN/TC 260/WG 7 ring test results with tolerances given in the Regulation (EC) Nr 2003/2003 Annex II and conclusions
- DS/ISO/TR 27877:2021 Statistical analysis for evaluating the precision of binary measurement methods and their results
European Committee for Standardization (CEN), Compared with the evaluation results
- CEN/TS 16490:2013 Fertilizers - Comparison of the CEN/TC 260/WG 7 ring test results with tolerances given in the Regulation (EC) Nr 2003/2003 Annex II and conclusions
PL-PKN, Compared with the evaluation results
ES-UNE, Compared with the evaluation results
- UNE-CEN/TS 16490:2016 Fertilizers - Comparison of the CEN/TC 260/WG 7 ring test results with tolerances given in the Regulation (EC) Nr 2003/2003 Annex II and conclusions
American Petroleum Institute (API), Compared with the evaluation results
- API TR 981-2021 Thermal Expansion Under Load and Creep of Refractories—An Evaluation and Comparison of Testing Methods (FIRST EDITION)
British Standards Institution (BSI), Compared with the evaluation results
- PD ISO/TR 27877:2021 Statistical analysis for evaluating the precision of binary measurement methods and their results
- BS ISO 18649:2004 Mechanical vibration - Evaluation of measurement results from dynamic tests and investigations on bridges
- PD ISO/TR 19686-100:2016 Petroleum products. Equivalency of test method determining the same property. Background and principle of the comparison and the evaluation of equivalency
International Electrotechnical Commission (IEC), Compared with the evaluation results
- IEC TR2 61356:1995 Functional evaluation of electrical insulation systems - Principles for test procedures when comparative testing is not feasible
- IEC TR 61356:1995 Functional evaluation of electrical insulation systems - Principles for test procedures when comparative testing is not feasible
- IEC TR 62062:2002 Results of the Round Robin series of tests to evaluate proposed amendments to IEC 60112
- IEC 60216-1:2001 Electrical insulating materials - Properties of thermal endurance - Part 1: Ageing procedures and evaluation of test results
Group Standards of the People's Republic of China, Compared with the evaluation results
- T/CSTM 00277.2-2022 Evaluation of stability for analytical instruments Part 2: Evaluation based on the precision of intra-laboratory determination results
International Telecommunication Union (ITU), Compared with the evaluation results
- ITU-T P.1401-2012 Methods, metrics and procedures for statistical evaluation, qualification and comparison of objective quality prediction models (Study Group 12)
European Telecommunications Standards Institute (ETSI), Compared with the evaluation results
- ETSI ETR 113-1993 Human Factors (HF); Results of an Evaluation Study of Pictograms for Point-to-Point Videotelephony
RU-GOST R, Compared with the evaluation results
- GOST 25997-1983 Fusion welding of metals. Statistical quality evaluation by nondestructive testing results
ESDU - Engineering Sciences Data Unit, Compared with the evaluation results
- ESDU 02010-2002 Sound radiation from orthotropic rectangular plates. Part II: validation by comparison with numerical and experimental results.
AT-ON, Compared with the evaluation results
- ONORM B 3680 Teil.2-1982 Testing of bituminous materials for road pavings and related purposes; evaluation of test results
Japanese Industrial Standards Committee (JISC), Compared with the evaluation results
- JIS C 2143-1:2011 Electrical insulating materials -- Properties of thermal endurance -- Part 1: Ageing procedures and evaluation of test results
- JIS C 2143-1:2015 Electrical insulating materials -- Thermal endurance properties -- Part 1: Ageing procedures and evaluation of test results
未注明发布机构, Compared with the evaluation results
- BS EN ISO 1462:1995(1999) Metallic coatings — Coatings other than those anodic to the basis metal — Accelerated corrosion tests — Method for the evaluation ofresults