ZH
RU
ES

Instruments that can measure boundaries

Instruments that can measure boundaries, Total:56 items.

In the international standard classification, Instruments that can measure boundaries involves: Metrology and measurement in general, Measurement of volume, mass, density, viscosity, Applications of information technology, Cereals, pulses and derived products, Electricity. Magnetism. Electrical and magnetic measurements, Interface and interconnection equipment, Soil quality. Pedology, Earthworks. Excavations. Foundation construction. Underground works, Measurement of fluid flow, Alarm and warning systems, Particle size analysis. Sieving, Radiation measurements, Analytical chemistry, Measurement of force, weight and pressure, Radiation protection, Railway rolling stock.

German Institute for Standardization, Instruments that can measure boundaries

DIN 16257:1987 Nominal positions and position symbols used for measuring instruments
DIN IEC 60625-2:1981 An interface system for programmable measuring instruments (byte serial, bit parallel); part 2: code and format conventions
DIN EN 60051-5:1991 Direct acting indicating analogue electrical measuring instruments and their accessories; part 5: special requirements for phase meters, power factor meters and synchroscopes (IEC 60051-5:1985, edition 4); german version EN 60051-5:1989
DIN EN 61518:2002-06 Mating dimensions between differential pressure (type) measuring instruments and flanged-on shut-off devices up to 413 bar (41,3 MPa) (IEC 61518:2001); German version EN 61518:2001 + Corrigendum:2002
DIN VDE 0119-207-12:2004 State of the railway vehicles - Control and instrumentation technology - Part 207-12: Warning signal equipment (acoustic and visual)
DIN IEC 61577-4:2009 Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 4: Equipment for the production of reference atmospheres containing radon isotopes and their decay products (STAR) (IEC 61577-4:2009)
DIN EN ISO 18674-3:2018 Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 3: Measurement of displacements across a line: Inclinometers (ISO 18674-3:2017); German version EN ISO 18674-3:2017

Association of German Mechanical Engineers, Instruments that can measure boundaries

VDI/VDE 2650 Blatt 4-2006 Requirements regarding self-monitoring and diagnosis in field instrumentation - Level measurement

PL-PKN, Instruments that can measure boundaries

PN G02316-1991 Measuring meters for hydrogeology. Electrical water level meters with recorders. Types, principal parameters and technical requirements
PN G02317-1991 Measuring meters for hydrogeology. Mechanical water level meters with boosters. Types, principal parameters and technical requirements
PN E06501-05-1992 Direct acting indicating analogue electrical measuring instruments and their accessories Special requirements for phase meters, power factor meters and synchroscopes

European Committee for Standardization (CEN), Instruments that can measure boundaries

HD 414.2 S1-1983 An interface system for programmable measuring instruments (byte serial, bit parallel); part 2: code and format conventions
EN ISO 18674-3:2017 Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 3: Measurement of displacements across a line: Inclinometers
EN ISO 18674-3:2017/A1:2020 Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 3: Measurement of displacements across a line: Inclinometers - Amendment 1 (ISO 18674-3:2017/Amd 1:2020)
HD 414.1 S1-1981 An interface system for programmable measuring instruments (byte serial, bit parallel); part 1: functional specifications, electrical specifications, mechanical specifications, system applications and requirements for the designer and user

BE-NBN, Instruments that can measure boundaries

NBN-EN 60051-5-1994 Direct acting indicating analogue electrical measuring instruments and their accessories Part 5: Special requirements for phase meters, power factor meters and synchroscopes
NBN-ISO 8322-8:1992 Building construction - Measuring instruments - Procedures for determining accuracy in use - Part 8 : Electronic distance-measuring instruments up to 150 m

International Organization for Standardization (ISO), Instruments that can measure boundaries

ISO 7971-2:2009 Cereals - Determination of bulk density, called mass per hectolitre - Part 2: Method of traceability for measuring instruments through reference to the international standard instrument
ISO 18674-3:2017 Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 3: Measurement of displacements across a line: Inclinometers
ISO 18674-2:2016 Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 2: Measurement of displacements along a line: Extensometers

RO-ASRO, Instruments that can measure boundaries

STAS SR ISO 8322-8:1995 Bullding construction - Measuring instrumenta - Procedures for determining accuracy in use. Part 8: Electronic distance measuring instruments up to 150 m.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Instruments that can measure boundaries

GB/T 22264.5-2008 Mounted digital display electric measuring instruments.Part 5:Special requirements for phase meters and power factor meters
GB/T 22264.5-2022 Mounted digital display electric measuring instruments—Part 5：Special requirements for phase meters and power factor meters
GB/T 7676.5-1998 Direct acting indicating analogue electrical measuring instruments and their accessories. Part 5: Special requirements for phase meters, power factor meters and synchroscopes

VN-TCVN, Instruments that can measure boundaries

TCVN 4996-2-2011 Cereals.Determination of bulk density, called mass per hectolitre.Part 2: Method of traceability for measuring instruments through reference to the international standard instrument

International Electrotechnical Commission (IEC), Instruments that can measure boundaries

IEC 60625-2:1993 Programmable measuring instruments; interface system (byte serial, bit parallel); part 2: codes, formats, protocols and common commands
IEC 60625-2:1980 An interface system for programmable measuring instruments (byte serial, bit parallel). Part 2 : Code and format conventions
IEC 60051-5:1985 Direct acting indicating analogue electrical measuring instruments and their accessories. Part 5: Special requirements for phase meters, power factor meters and synchroscopes.
IEC 60051-5:2017 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 5: Special requirements for phase meters, power factor meters and synchroscopes
IEC 61017-2:1994 Radiation protection instrumentation; portable, transportable or installed equipment to measure X or gamma radiation for environmental monitoring; part 2: integrating assemblies
IEC 61577-4:2009 Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 4: Equipment for the production of reference atmospheres containing radon isotopes and their decay products (STAR)
IEC 61582:2004 Radiation protection instrumentation - In vivo counters - Classification, general requirements and test procedures for portable, transportable and installed equipment

British Standards Institution (BSI), Instruments that can measure boundaries

PD ISO/TS 20460:2015 Paper and board. Automated on-line testing. Metrological comparability between standardized measurements and output of on-line gauges
BS EN ISO 18674-2:2016 Geotechnical investigation and testing. Geotechnical monitoring by field instrumentation. Measurement of displacements along a line: Extensometers
BS EN IEC 60051-5:2018 Direct acting indicating analogue electrical measuring instruments and their accessories - Special requirements for phase meters, power factor meters and synchroscopes
BS EN 61577-4:2014 Radiation protection instrumentation. Radon and radon decay product measuring instruments. Equipment for the production of reference atmospheres containing radon isotopes and their decay products (STAR)
BS IEC 61577-4:2009 Radiation protection instrumentation - Radon and radon decay product measuring instruments - Equipment for the production of reference atmospheres containing radon isotopes and their decay products (STAR)
BS 89-5:1990 Direct acting indicating analogue electrical measuring instruments and their accessories - Specification for special requirements for phase meters, power factor meters and synchroscopes
BS EN 61518:2001 Mating dimensions between differential pressure (type) measuring instruments and flanged-on shut-off devices up to 413 bar (41,3 MPa)
BS EN 61582:2006 Radiation protection instrumentation - In vivo counters - Classification, general requirements and test procedures for portable, transportable and installed equipment

European Committee for Electrotechnical Standardization（CENELEC）, Instruments that can measure boundaries

EN 60051-5:1989 Direct Acting Indicating Analogue Electrical Measuring Instruments and Their Accessories Part 5: Special Requirements for Phase Meters, Power Factor Meters and Synchroscopes

Association Francaise de Normalisation, Instruments that can measure boundaries

NF C42-100-5*NF EN IEC 60051-5:2018 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 5 : special requirements for phase meters, power factor meters and synchroscopes
NF X11-622:1977 Determination of the area per unit mass of powders (specific surface) by means of gas adsorption. Various readings of the basic method.
NF E11-057:2016 Geometrical product specification (GPS) - Length measuring instruments - Reception and verification of mechanical dial gauges with radial retractable stem
NF C19-104*NF EN 61582:2006 Radiation protection instrumentation - In vivo counters - Classification, general requirements and test procedures for portable, transportable and installed equipment

Korean Agency for Technology and Standards (KATS), Instruments that can measure boundaries

KS C IEC 60051-5-2013(2018) Direct acting indicating analogue electrical measuring instruments and their accessories－Part 5：Special requirements for phase meters, power factor meters and synchroscopes
KS C IEC 61017-2:2005 Radiation protection instrumentation－Portable, transportable or installed equipment to measure X or gamma radiation for environmental monitoring－Part 2：Integrating assemblies

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Instruments that can measure boundaries

GB/T 7676.5-2017 Direct acting indicating analogue electrical measuring instruments and their accessories—Part 5：Special requirements for phase meters, power factor meters and synchroscopes
GB/T 36053-2018 Evaluation of thickness, density and interface width of thin films by X-ray reflectometry—Instrumental requirements, alignment and positioning, data collection, data analysis and reporting

RU-GOST R, Instruments that can measure boundaries

GOST R 8.826-2013 State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of the amplitude of the ultrasonic displacement and the particle velocity of the surface of the solid bodies
GOST R 8.746-2011 State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring the ratio error and phase displacement of a.c. power frequency voltage in the range from 0,1/V3 do 750/V3 kB

American Society for Testing and Materials (ASTM), Instruments that can measure boundaries

ASTM D3284-99 Standard Test Method for Combustible Gases in the Gas Space of Electrical Apparatus Using Portable Meters

ES-UNE, Instruments that can measure boundaries

UNE-EN 61518:2001 Mating dimensions between differential pressure (type) measuring instruments and flanged-on shut-off devices up to 413 bar (41,3 MPa) (Endorsed by AENOR in May of 2002.)

Lithuanian Standards Office , Instruments that can measure boundaries

LST EN 60051-5-2000 Direct acting indicating analogue electrical measuring instruments and their accessories. Part 4: Special requirements for phase meters, power factor meters and synchroscope (IEC 60051-5:1985, 4th edition)

未注明发布机构, Instruments that can measure boundaries

BS EN 61518:2001(2002) Mating dimensions between differential pressure (type) measuring instruments and flanged - on shut - off devices up to 413 bar (41,3 MPa)

Japanese Industrial Standards Committee (JISC), Instruments that can measure boundaries

JIS C 1102-5:1997 Direct acting indicating analogue electrical measuring instruments and their accessories Part 5: Special requirements for phase meters, power factor meters and synchroscopes