ZH
RU
ES
conversion
conversion, Total:339 items.
In the international standard classification, conversion involves: Installations in buildings, Structures of buildings, Quantities and units, Metrology and measurement in general, Aircraft and space vehicles in general, Measurement of force, weight and pressure, Measurement of volume, mass, density, viscosity, Linear and angular measurements, Petroleum, petroleum products and natural gas handling equipment, Testing of metals, Ferrous metals, Farming and forestry, Coals, Freight distribution of goods, Mechanical testing, Fuels, Cutting tools, Products of the chemical industry, Natural gas, Paper production processes, Technical drawings, Ventilators. Fans. Air-conditioners, Pipeline components and pipelines, Insulating fluids, Electrical wires and cables, Air quality, Semiconducting materials, Nuclear energy engineering, Electronic components in general, Radiation protection, Textile fibres, Radiation measurements, Products of the textile industry.
SG-SPRING SG, conversion
- SS 55-1971 CONVERSION FACTORS AND TABLES
- SS 53-1971 GUIDE FOR INTER-CONVERSION OF VALUES FROM ONE SYSTEM OF UNITS TO ANOTHER
IN-BIS, conversion
British Standards Institution (BSI), conversion
Association Francaise de Normalisation, conversion
Institute of Interconnecting and Packaging Electronic Circuits (IPC), conversion
European Committee for Standardization (CEN), conversion
- EN 12405-1:2005+A2:2010 Gas meters - Conversion devices - Part 1: Volume conversion
- EN 12405-1:2021 Gas meters - Conversion devices - Part 1: Volume conversion
- EN 12405-1:2005 Gas meters - Conversion devices - Part 1: Volume conversion (Incorporates Amendment A2: 2010)
- EN ISO 18265:2013 Metallic materials - Conversion of hardness values (ISO 18265:2013)
- EN ISO 18265:2003 Metallic materials Conversion of hardness values ISO 18265:2003
- EN 12405-2:2012 Gas meters - Conversion devices - Part 2: Energy conversion
- EN 12405-3:2015 Gas meters - Conversion devices - Part 3: Flow computer
- EN ISO 2566-2:2021 Steel - Conversion of elongation values - Part 2: Austenitic steels (ISO 2566-2:2021, Corrected version 2022-05)
- EN ISO 2566-2:1999 Steel - Conversion of Elongation Values - Part 2: Austenitic Steels
- EN ISO 2566-1:2021 Steel - Conversion of elongation values - Part 1: Carbon and low-alloy steels (ISO 2566-1:2021, Corrected version 2022-06)
- EN ISO 2566-1:1999 Steel - Conversion of Elongation Values - Part 1: Carbon and Low Alloy Steels
- prEN ISO 2566-2:2021 Steel - Conversion of elongation values - Part 2: Austenitic steels (ISO/FDIS 2566-2:2021)
- prEN ISO 2566-1:2021 Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO/FDIS 2566-1:2021)
CEN - European Committee for Standardization, conversion
- EN 12405-1:2018 Gas meters - Conversion devices - Part 1: Volume conversion
ESDU - Engineering Sciences Data Unit, conversion
NZ-SNZ, conversion
German Institute for Standardization, conversion
- DIN EN 12405-1:2006 Gas meters - Conversion devices - Part 1: Volume conversion; English version of DIN EN 12405-1:2006-04
- DIN EN 12405-1:2007 Gas meters - Conversion devices - Part 1: Volume conversion (includes Amendment A1:2006); English version of DIN EN 12405-1:2007-08
- DIN 4892:1975 Inch - Millimetre; Conversion Tables
- DIN 66038:1971 Torr - millibar, millibar - torr; conversion tables
- DIN EN 12405-1:2011 Gas meters - Conversion devices - Part 1: Volume conversion; German version EN 12405-1:2005+A2:2010
- DIN 66039:1971 Kilocalorie - watt hour, watt hour - kilocalorie; conversion tables
- DIN 66034:1967 Kilopond (kg f) - Newton, Newton - Kilopond (kg f); Conversion Tables
- DIN EN ISO 18265:2014-02 Metallic materials - Conversion of hardness values (ISO 18265:2013); German version EN ISO 18265:2013
- DIN 4893:1965 Millimetre - inch; conversion tables from 1 up to 10000 mm
- DIN 66035:1974 Calorie - Joule, Joule - calorie; conversion tables
- DIN 1301-3:1979 Units; Conversions of Units No Longer to be Used
- DIN 4890:1975 Inch - Millimetre; Fundamentals for Conversion
- DIN 50150:2000 Testing of metallic materials - Conversion of hardness values
- DIN 66036:1976 Metric Horsepower - Kilowatt, Kilowatt - Metric Horsepower; Conversion Tables
- DIN 66037:1967 Kilopond (kg f)/Square Centimetre - Bar, Bar - Kilopond (kg f)/Square Centimetre; Conversion Tables
- DIN EN ISO 2566-2:1999 Steel - Conversion of elongation values - Part 2: Austenitic steels (ISO 2566-2:1984); German version EN ISO 2566-2:1999
- DIN EN ISO 2566-2:2022-10 Steel - Conversion of elongation values - Part 2: Austenitic steels (ISO 2566-2:2021, Corrected version 2022-05); German version EN ISO 2566-2:2021
- DIN 4703-3:2000 Heating appliances - Part 3: Conversion of the standard thermal output
- DIN 2615-1:1992 Steel butt-welding pipes fittings; tees with reduced pressure factor
- DIN EN ISO 2566-1:2022-10 Steel - Conversion of elongation values - Part 1: Carbon and low-alloy steels (ISO 2566-1:2021, Corrected version 2022-06); German version EN ISO 2566-1:2021
- DIN VDE 0276-1000:1995 Power cables - Part 1000: Current-carrying capacity, general, conversion factors
- DIN EN 12405-2:2012 Gas meters - Conversion devices - Part 2: Energy conversion; German version EN 12405-2:2012
- DIN EN ISO 18265:2014 Metallic materials - Conversion of hardness values (ISO 18265:2013); German version EN ISO 18265:2013
- DIN 60910:1985 Linear densities of textile fibres and yarns; conversion tables for the Tex system
International Organization for Standardization (ISO), conversion
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., conversion
AENOR, conversion
- UNE 40015:1982 CONVERSION TABLE OF THE NUMBER OF YARNS
- UNE-EN ISO 18265:2014 Metallic materials - Conversion of hardness values (ISO 18265:2013)
- UNE 40151-4:1974 GENERAL CONVERSION TABLE TO SUBSTITUTE TRADITIONAL NUMBERS OF YARNS BY ROUND OFF VALUES OF TEX SYSTEM.
VE-FONDONORMA, conversion
IETF - Internet Engineering Task Force, conversion
Japanese Industrial Standards Committee (JISC), conversion
未注明发布机构, conversion
RO-ASRO, conversion
U.S. Air Force, conversion
Taiwan Provincial Standard of the People's Republic of China, conversion
IPC - Association Connecting Electronics Industries, conversion
Standard Association of Australia （SAA）, conversion
Korean Agency for Technology and Standards (KATS), conversion
American National Standards Institute （ANSI), conversion
Military Standard of the People's Republic of China-General Armament Department, conversion
CO-ICONTEC, conversion
Professional Standard - Aviation, conversion
- HB/Z 147-1989 Unit of measurement conversion rules
- HB 6220-1989 Conversion between metric and imperial sizes
- HB 0-94-1977 Ferrous metal hardness and strength conversion table
- HB/Z 215-1992 Conversion value of hardness and strength of aluminum alloy sheet
- HB 7389-1996 Rockwell hardness HRG and Brinell hardness HBS conversion value
IT-UNI, conversion
CZ-CSN, conversion
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, conversion
- GB 2586-1991 Calorie Units, Symbols and Conversions
- GB/T 4115-1983 Horse-power and kilowatt conversion tables
- GB/T 3771-1983 Conversion of hardness and strength for copper alloys
- GB/T 26937-2011 Conversion unit of quantitative analysis for freight containers
- GB/T 1172-1999 Conversion of hardness and strength for ferrous metal
- GB/T 4112-1983 Kilogram-force and newton conversion tables
- GB/T 5112-1985 Electron-volt and joule conversion tables
- GB/T 5115-1985 Curie and Becquerel conversion tables
- GB/T 26937-2011(英文版) Conversion unit of quantitative analysis for freight containers
- GB/T 18776-2002 Tolerance dimensions--Conversion form inches into millimetres and vice versa
- GB/T 4114-1983 Kilowatt-hour and megajoule conversion tables
- GB/T 4116-1983 Oersted and Ampere per meter conversion tables
- GB/T 5116-1985 Rontgen and Coulomb per kilogram conversion tables
- GB/T 5113-1985 Atomic mass unit and kilogram conversion tables
- GB/T 19325-2003 Coated abrasive products--Dimensional tolerances on non-standard conversions
- GB/T 17600.2-1998 Steel--Conversion of elongation values--Part 2: Austenitic steels
- GB/T 22634-2008 Conversion between water content and water dew point of natural gas
- GB/T 5114-1985 Apostilb and candela per square metre conversion tables
- GB/T 4113-1983 Kilogram-force per square centimetre and megapascal conversion tables
- GB/T 17600.1-1998 Steel--Conversion of elongation values--Part 1: Carbon and low alloy steels
- GB/T 17394.4-2014 Metallic materials.Leeb hardness test.Part 4:Tables of hardness values conversation
- GB/T 13389-1992 Practice for conversion between resistivity and dopant density for boron-doped and phosphorus-doped silicon
- GB/T 13389-2014 Practice for conversion between resistivity and dopant density for boron-doped, phosphorus-doped, and arsenic-doped silicon
- GB/T 15447-1995 Conversion method of absorbed doses in different materials irradiated by X,γ rays and electron beams
- GB/T 15447-2008 Conversion method of absorbed doses in different materials irradiated by X、γ rays and election beams
Danish Standards Foundation, conversion
农业农村部, conversion
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, conversion
YU-JUS, conversion
HU-MSZT, conversion
UY-UNIT, conversion
Cooling Technology Institute, conversion
IEEE - The Institute of Electrical and Electronics Engineers@ Inc., conversion
GM North America, conversion
American Society of Mechanical Engineers (ASME), conversion
GM Europe, conversion
Institute of Electrical and Electronics Engineers (IEEE), conversion
NL-NEN, conversion
- NEN 984-1970 Twist factor in the Tex System and conversion tables
- NEN 905-1964 Textiles Conversion tables of yarn numbers and counts
Lithuanian Standards Office , conversion
UNKNOWN, conversion
BE-NBN, conversion
SE-SIS, conversion
TR-TSE, conversion
- TS 1999-1975 CALCULATION OF COAL AND ?OKE ANALYSES TO DIFFERENT BASES
- TS 2023-1975 TEEL-CONVERSION OF ELONGATION VALUES PART !: CARBON AND L0W ALLOV STEEL8
AIA/NAS - Aerospace Industries Association of America Inc., conversion
- NAS31-1958 Conversion Table@ Surface Roughness Designations (Rev 1)
Professional Standard - Machinery, conversion
- JB/T 10590-2006 Coated abrasive products-Dimensional tolerances on non-standard conversions
- JB/T 10744-2007 Coated abrasive products.Dimensional tolerances on non-standard conversions
国家市场监督管理总局、中国国家标准化管理委员会, conversion
Guangxi Provincial Standard of the People's Republic of China, conversion
- DB45/T 1700-2018 Conversion method of vehicle volume and volume of eucalyptus logs
ES-UNE, conversion
- UNE-EN ISO 2566-2:2022 Steel - Conversion of elongation values - Part 2: Austenitic steels (ISO 2566-2:2021, Corrected version 2022-06)
- UNE-EN ISO 2566-1:2022 Steel - Conversion of elongation values - Part 1: Carbon and low-alloy steels (ISO 2566-1:2021, Corrected version 2022-06)
KE-KEBS, conversion
- KS 06-49-1977 KENYA STANDARD ON TOLERANCED DIMENSIONS - CONVERSION FROM INCHES INTO MILLIMETRES AND VICE VERSA
American Society for Testing and Materials (ASTM), conversion
- ASTM D4826-88(2007) Standard Practice for Units of Measurement and Conversion Factors for Pulp, Paper, and Paperboard
- ASTM D4826-88(2002) Standard Practice for Units of Measurement and Conversion Factors for Pulp, Paper, and Paperboard
- ASTM D1914-95(2004)e1 Standard Practice for Conversion Units and Factors Relating to Sampling and Analysis of Atmospheres
- ASTM D2260-01 Standard Tables of Conversion Factors and Equivalent Yarn Numbers Measured in Various Numbering Systems
- ASTM D2260-96 Standard Tables of Conversion Factors and Equivalent Yarn Numbers Measured in Various Numbering Systems
- ASTM D2260-03(2009) Standard Tables of Conversion Factors and Equivalent Yarn Numbers Measured in Various Numbering Systems
- ASTM D1914-95(2010) Standard Practice for Conversion Units and Factors Relating to Sampling and Analysis of Atmospheres
- ASTM D2260-03(2018) Standard Tables of Conversion Factors and Equivalent Yarn Numbers Measured in Various Numbering Systems
- ASTM D2270-10 Standard Practice for Calculating Viscosity Index From Kinematic Viscosity at 40 and 100&176C
ZA-SANS, conversion
- SANS 2566-1:2005 Steel - Conversion of elongation values Part 1: Carbon and low alloy steels
European Committee for Electrotechnical Standardization（CENELEC）, conversion
- HD 512 S1-1989 Measurement of the Conversion Factor of Electro-Optical X-Ray Intensifiers
GOSTR, conversion
- GOST 34092-2017 Solid biofuel. Conversion of analytical results on different basis
Professional Standard - Commodity Inspection, conversion
- SN/T 2639-2010 Standard practice for conversion of kinematic viscosity to saybolt universal viscosity
Professional Standard - Railway, conversion
- TB/T 1749-1993 Conversion coefficient of comprehensive energy consumption per unit product of railway transportation enterprises
TH-TISI, conversion
- TIS 1075-1992 Standard for conversion between computer codes and 6.bit teletype codes
API - American Petroleum Institute, conversion
- API MPMS 11.5.1-2009 Manual of Petroleum Measurement Standards Chapter 11 - Physical Properties Data Section 5 - Density/Weight/Volume Intraconversion Part 1 - Conversions of API Gravity at 60 °F (First Edition)
- API MPMS 11.5.2-2009 Manual of Petroleum Measurement Standards Chapter 11 - Physical Properties Data Section 5 - Density/Weight/Volume Intraconversion Part 2 - Conversions for Relative Density (60/60 °F) (First Edition)
- API MPMS 11.5.3-2009 Manual of Petroleum Measurement Standards Chapter 11 - Physical Properties Data Section 5 - Density/Weight/Volume Intraconversion Part 3 - Conversions for Absolute Density at 15 °C (First Edition)
RU-GOST R, conversion
- GOST 8.602-2010 State system for ensuring the uniformity of measurements. Density of oil. The tables for recalculation
Professional Standard - Energy, conversion
- NB/T 42017-2013 Reciprocating internal combustion gas turbine power and fuel consumption rate conversion method
FI-SFS, conversion
AT-ON, conversion
- OENORM EN ISO 2566-1:2021 Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO/FDIS 2566-1:2021)